; AlBader Calibration Center has Successfully Completed ISO 17025 Accreditation Audit with Help of GMG
Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out
Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

AlBader Calibration Center has Successfully Completed ISO 17025 Accreditation Audit with Help of GMG

VIEWS: 3 PAGES: 2

Al Bader Calibration Center, Qatar has Successfully Completed ISO 17025 Accreditation Audit from US accreditation body with Help of Global Manager Group. GMG has conducting internal audit for iso 17025 checklist competence after implementation.

More Info
  • pg 1
									PR Log - Global Press Release Distribution




AlBader Calibration Center has Successfully Completed ISO 17025 Accreditation Audit with Help
                                           of GMG

       Source: Global Manager Group
       Dated: May 11, 2013

       Al Bader Calibration Center, Qatar has Successfully Completed ISO 17025 Accreditation Audit from US
       accreditation body with Help of Global Manager Group. GMG has conducting internal audit for iso 17025
       checklist competence after implementation.

       Al Bader Calibration Center, Qatar (Formerly known as Calibration division of Doha Technical
       Laboratories) is only laboratory in the Qatar, which is engaged in calibration of gauges for Density and
       moisture standard related parameter. The same facility was accredited under for limited scope of density
       gauge in old name for ISO/IEC 17025:2005 on January 2012. Considering the need of calibration in the
       Qatar, the laboratory has given project to Global Manager Group for setting-up fully fledged calibration
       laboratory to fulfill the needs of the customers. GMG has exercised on all aspects of the calibration and
       accepted the challenge to make laboratory operational along-with the accreditation to ISO/IEC 17025:2005
       for all the discipline of the calibration within a span of 9 month. Al Bader Calibration Center has
       successfully completed ISO 17025 accreditation audit from US accreditation body with help of Global
       Manager Group.

       This calibration laboratory had been recommended for the ISO/IEC 17025 accreditation in majority of the
       disciplines of calibration such as Density and standard, Mechanical, Pressure, Mass, Volume, Force,
       Acoustic, RPM, Thermal, Time, Chemical, Electrometric etc. With this ISO 17025 accreditation, Al Bader
       Calibration Center becomes the first laboratory in Qatar having facility for calibration of all types of
       equipments and specialized equipments like PH meter, conductivity meter, sieves.

       Global Manager Group has completed ISO 17025 consultancy project right from establishment till its
       journey to the accreditation to ISO/IEC 17025:2005 system in the Laboratory with in the period of 9
       months. Following are the steps GMG follows while ISO 17025 certification of Al Bader Calibration
       Center:
       • Identification of area for the calibration standard room and designing of the standard room considering the
       accommodation and environment condition as per the requirements of calibration.
       • Preparation of disciplines and types of instruments to be covered under the scope of accreditation.
       • Selection of master equipments (Reference standards) for calibration of the equipments covered for
       calibration and field of calibration.
       • Identification of suppliers of reference standards, collection of quotes, quotation comparison of best
       source of reference standards.
       • Issuing purchase orders for the reference standards in consultation with the Laboratory.
       • Selection of calibration agency for reference standards and calibration of reference standards having better
       CMC.
       • Receipt and arrangement of reference standards in the laboratory at the identified locations.
       • Exhaustive training on calibration to each employee as per the relevant standards of calibration.
       • 10 day training at India for practical training and demonstration of each calibration under supervision at
       ISO/IEC 17025 accredited calibration laboratory, to develop the skill in the calibration to the laboratory
       employees.
       • Preparation of documents of ISO/IEC 17025 like, iso 17025 manual, Quality procedures, standard
       operation procedures, calibration methods, work sheet, test report etc.
       • Providing detail technical documents like calibration observation report, calibration certificate,



                                                         Page 1/2
PR Log - Global Press Release Distribution




measurement uncertainty software, providing calibration methods etc.
• Training to all level of employees with active participation.
• Conducting internal audit for checklist competence of the laboratory after implementation.
• Conducting management review for ensuring effective implementation.

For more detail visit: http://www.Globalmanagergroup.com/

--- End ---

Email              Click to contact author
Phone              +91-79-26565405
City/Town          Doha
State/Province     doha
Country            Qatar
Industry           Business, Industrial
Tags               iso 17025 accreditation, ISO 17025 consultancy, iso/iec 17025:2005, iso 17025 manual
Link               http://prlog.org/12135617

                   Scan this QR Code with your SmartPhone to-
                   * Read this news online
                   * Contact author
                   * Bookmark or share online




                                                      Page 2/2

								
To top