Documents
Resources
Learning Center
Upload
Plans & pricing Sign in
Sign Out

INT TENDER

VIEWS: 12 PAGES: 7

									DESIGN POINT, ARCHITECTS & ENGINEERS, K.S. RAO ROAD, MANGALORE-1. STATE BANK OF MYSORE, REGIONAL OFFICE, MANGALORE.
PROPOSED INTERIOR FURNISHING WORK FOR STATE BANK OF MYSORE , BELTHANGADY BRANCH.

INTERIOR FURNISHING WORK - TENDER ABSTRACT
SL. DESCRIPTION OF WORK No. 1 CASH CABIN HIGH COUNTER. PROVIDING, FABRICATING AND FIXING OF CASH COUNTER SYSTEM MADE OUT OF 19 MM THIICK MARINE GRADE BLOCK BOARD ( APPROVED MAKE ) STRUCTURE WITH EDGES FIXED WITH 6MM TEAK WOODEN LIPPING, HAVING CLERICAL TOP 2'6" HEIGHT FROM THE GROUND LEVEL AND 2'6" CLEAR TOP WIDTH. TABLE TOP SHALL BE PROVIDED WITH 19 MM GRANITE TOP AND FIXING 3'6" HEIGHT 12 MM THICK CLEAR FLOAT GLASS ABOVE THE TABLE TOP. UNIT SHALL BE PROVIDED WITH A SLIDING KEYBOARD TRAY 2'3" WIDE WITH SLIDERS, DRAWER WITH SLIDERS AND CUPBOARD BELOW THE DRAWER WITH LOCKING ARRANGEMENTS , ALUMINIUM HANDLES, BRASS HINGES ETC. THE FRONT, BACK AND TOP SURFACES SHOULD BE LAMINATED WITH 1.5 MM THICK RUBBER WOOD LAMINATE. THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. PROVISION FOR CPU STAND 1'0" X 2'0" AND FOOTREST OF SIZE 75MM X 38 MM SHALL BE PROVIDED AT BOTTOM. WIRE MANAGER SHOULD BE PROVIDED AT THE CORNER OF THE COUNTER TOP. ALL EXPOSED EDGES OF BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE. 2 OFFICER'S TABLE. 'L SHAPED'(5' 0"X 5' 6") PROVIDING, FABRICATING AND FIXING OFFICER'S TABLE SYSTEM 5'0" LENGTH, MADE OUT OF 19 MM MARINE GRADE BLOCK BOARD ( APPROVED MAKE ) STRUCTURE WITH EDGES FIXED WITH 6 MM TEAK WOOD LIPPING, HAVING CLERICAL TOP 2'6" HEIGHT FROM THE GROUND LEVEL, AND 2'6" CLEAR TOP WIDTH,TABLE TOP SHALL BE PROVIDED 19MM GRANITE TOP. IT WILL HAVE A SIDE TABLE OF SIZE 1'6" X 3'0". EACH UNIT SHALL BE PROVIDED WITH A SLIDING KEYBOARD TRAY 2'3" WIDE, DRAWER WITH SLIDERS AND CUPBOARD BELOW THE DRAWER WITH LOCKING ARRANGEMENTS(GODREJ MAKE), ALUMINIUM HANDLES,BRASS HINGES ETC. THE FRONT, BACK AND TOP SURFACES SHOULD BE LAMINATED WITH 1.5MM THICK RUBBER WOOD LAMINATE .THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. PROVISION FOR CPU STAND 1'0" X 2'0" AND FOOTREST OF SIZE 75MM X 38 MM SHALL BE PROVIDED AT BOTTOM. WIRE MANAGER SHOULD BE PROVIDED AT THE CORNER TO THE TABLE TOP. ALL EXPOSED EDGES OF BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE. UNIT QTY RATE AMOUNT

RFT

5.25

UNIT

2.00

Page 1

3 CASH CABIN PARTITION WALL PROVIDING AND FIXING CASH CABIN PARTITION WALL MADE OUT OF WOODEN ( SAL WOOD ) FRAME WORK ( 3'' X 2'' ) OF OUTER SECTION AND INTERMEDIATE SECTIONS OF ( 2" X 2" ) AT 2'0" C / C BOTH WAYS FIXED FIRMLY TO THE TO WALLS AND FLOORS WITH SCREWS, CLAMPS ETC.BOTH SIDES SHALL BE PROVIDED WITH 6MM THK MARINE GRADE PLYWOOD SECURED FIRMLY TO THE FRAME WITH ADHESIVE AND CHROMODISED SCREWS AND 12 MM THICK CLEAR FLOAT GLASS PANNELS FOR ALL SIDES WITH 1.5 MM THK RUBBER WOOD LAMINATE AND TEAK WOOD BEADING ON ALL EXPOSED EDGES .EACH CABIN SHALL HAVE ONE DOOR 2'6" X 6'0" SIZE WITH 6"HANDLES ON BOTH SIDES ,BRASS HINGES AND SELF LOCKING ARRANGEMENTS FOR DRAWER UNITS & DOOR . PROVISION FOR SLIP TRAYS.PARTITION WALL HEIGHT IS 7'0" FROM FLOOR LEVEL. 4 SINGLE SKINNED PARTITION WALL ( UPS ROOM / RECORD ROOM ) PROVIDING, FIXING AND FABRICATING SINGLE SKINNED WOOD BASED PARTITION WALL IN ANDAMAN TEAK WOOD FRAME WORK COMPRISING OF 50 MM X 50 MM ( 2" X 2" ) VERTICALS AT 600 MM TO 900 MM ( 2' - 0" - 3' 0" ) INTERVALS ( FOR MDF AND EQUIVALENT WOOD, THE SPACING SHOULD NOT BE MORE THAN 600 MM ( 2' 0" ) INTERVALS WITH THE SKIN ON ONE SIDES MADE UP OF 6 MM BWP PLY WOOD FINISH WITH 1.5 MM RUBBER WOOD LAMINATES (FORMICA).THE OTHER SIDE OF THE PARTITION SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER.THE PARTITIONS SHALL BE PROVIDED WITH DOORS ( AS PER THE DRAWING) WITH GODREJ NIGHT LATCHES WITH HANDLES, DOOR CLOSERS AND NECESSARY FITTINGS ETC,INCLUDING COST OF ALL MATERIALS AND LABOUR CHARGES ETC, COMPLETE.(NOTE: PARTITION SHALL BE PROVIDED FROM GROUND LEVEL UPTO CIELING HEIGHT. MANAGERS CABIN / SERVER ROOM -DOUBLE SKINNED PARTITION WALL. PROVIDING, FIXING AND FABRICATING DOUBLE SKINNED, WOOD BASED PARTITION IN CP / ASSAM / ANDAMAN TEAK WOOD / EQUIVALENT SOLID WOOD OR MDF FRAME WORK COMPRISING OF 50 MM X 50 MM ( 2" X 2" ) VERTICALS AT 600 MM TO 900 MM ( 2' - 0" - 3' - 0" ) INTERVALS ( FOR MDF AND EQUIVALENT WOOD, THE SPACING SHOULD NOT BE MORE THAN 600 MM ( 2' 0" ) INTERVALS WITH THE SKIN ON BOTH SIDES MADE UP OF 6 MM BWP PLY WOOD FINISH WITH 1.5 MM LAMINATES. 10 MM THICK CLEAR FLOAT GLASS PANNELS (MODI / SAINT GLOBIN) SHALL BE PROVIDED WITH GLAZING AND TEAK WOOD BEADING ON ALL EXPOSED EDGES. THE PARTITIONS SHALL BE PROVIDED WITH DOORS ( AS PER THE DRAWING) WITH GODREJ NIGHT LATCHES WITH HANDLES, DOOR CLOSERS AND NECESSARY FITTINGS ETC, COMPLETE. PARTITION SHALL BE PROVIDED UPTO 3'0" FROM FLOOR LEVEL AND GLASS UPTO 7'0".

SFT

120.00

SFT

220.00

5

SFT

410.00

Page 2

6 MANAGERS TABLE -(MT) SIZE - 6'0"X3'0"X2'6" PROVIDING, FABRICATING AND FIXING MANAGER'S WORKING TABLE MADE OUT OF 19 MM MARINE GRADE BLOCK BOARD, HAVING TABLE TOP 2'6" HEIGHT FROM THE GROUND LEVEL AND 3'0" CLEAR TOP WIDTH. TABLE SHALL BE PROVIDED WITH A SLIDING KEYBOARD TRAY 2'3" WIDE WITH SLIDER ,2NOS DRAWER ON EITHER SIDES AND CUPBOARD BELOW THE DRAWER WITH LOCKING ARRANGEMENTS, ALUMINIUM HANDLES, BRASS HINGES ETC. ALL EXPOSED SURFACES SHOULD BE LAMINATED WITH 1.5 MM THICK RUBBER WOOD LAMINATE. THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. PROVISION FOR CPU STAND 1'0" X 2'0" AND FOOTREST OF SIZE 75MM X 38 MM SHALL BE PROVIDED AT BOTTOM. WIRE MANAGER SHOULD BE PROVIDED TO THE COUNTER. ALL EXPOSED EDGES OF BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE.THE TABLE TOP SHALL BE PROVIDED WITH 6MM THICK CLEAR GLASS OF SIZE 6'0"X3'0". 7 MANAGER'S SIDE TABLE ( MST ) SIZE - 3' 0" X 1' 6" X 2' 6" PROVIDING, FABRICATING AND FIXING MANGER STORAGE SYSTEM WITH 19MM MARINE PLYWOOD STRUCTURE, 19MM MARINE BLOCK BOARD SHURTERS AND 6MM MARINE PLYWOOD BACKING WITH EDGES FIXED WITH 6MM TEAK WOODEN LIPPING. THE UNIT SHALL BE PROVIDED WITH A SLIDING KEY BOARD TRAY 2' 3" WIDE WITH SLIDERS, DRAWER, AND A CPU UNIT OF SIZE 1' 0" X 2' 0" UNDERNEATH THE DRAWER. THE DRAWER SHALL HAVE ALUMINIUM HANDLES , BRASS HINGES, SLIDERS FOR DRAWERS, MAGNETIC CATCHER ETC. WIRE MANAGER SHALL BE PROVIDED AT THE RIEGHT HAND CORNER OF THE TABLE TOP. ALL EXPOSED SURFACES SHOULD BE LAMINTED WITH 1.5 MM THICK TEAK WOOD LAMINATE. THE INTRENAL SURFACES SHOULD BE PAINDED WITH TWO COATES OF ENAMEL PAINT OVER A BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE. 8 DOUBLE SKINNED PARTITION WALL NEAR FLAP DOOR PROVIDING FIXING & FABRICATING DOUBLE SKINNED, WOOD BASED PARTITION IN CP / ASSAM/ ANDAMAN TEAK WOOD / EQUIVALENT SOLID WOOD OR MDF FRAME WORK COMPRISIMG OF 50MM X 50MM (2" X 2" ) VERTICALS AT 600MM TO 900MM (1'6"x2'0") INTERVALS ( FOR MDF AND EQUIVALENT WOOD THE SPACING SHOULD NOT BE MORE THAN 600 MM (2' 0") INTERVALS WITH THE SKIN ON BOTH SIDES MADE UP OF 6MM BWP PLY WOOD (KITPLY / UNIPLY / KENWOOD MAKE ) FINISH WITH 1.5 MM RUBBER WOOD LAMINTES. THE PARTITION WALL SHALL BE PROVIDE A 8MM THICK FROSTED GLASS WITH ETCHED TOP EDGE OF HEIGHT 1' 0" SHALL BE PROVIDED IN THE TOP OF THE PARTITON WALL . EXPOSED FACES SHALL BE LAMINATED WITH 1.5MM THICK RUBBER WOOD LAMINATION. ALL EDGES OF TOP& BOTTAM OF THE PARTITION SHALL HAVE A BAND OF TOMATO RED COLOUR LAMINATION. INCLUDING COST OF ALL NECESSARY MATERIALS, LABOUR ETC COMPLETE.TOTAL HEIGHT OF THE PARTITION WALL IS 5'0" FROM THE FLOOR LEVEL

RFT

6.00

NO

1.00

SFT

25.00

Page 3

9 WRITING TABLE (SIZE 3' 0' X 1' 0" X 1' 0" ) PROVIDING & FIXING WALL MOUNTED WRITING TABLE USING 12MM THICK (BWR PF BONDED) MARINE GRADE PLYWOOD THE EXPOSED SURFACE TO BE COVERED WITH 1.5MM THICK RUBBER WOOD LAMINATE. DIVIDERS WILL BE PROVIDED AT EVERY 200MM C/C. THE INNER SURFACES SHALL BE FINISHED WITH 2 COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. THE EDGES ARE TO BE PROVIDED WITH WODDEN BEADING AND LAMINATED WITH 1.5MM THICK TOMATO RED COLOUR LAMINATE. THE TABLE SIZE SHALL BE 3'0" X 1' 0" X1' 0". THE TABLE SHALL BE FIXED TO THE WALL USING MS ANGLE SUPPORT OF SIZE 35MM X 35MM X 4MM. THE COST WILL BE INCLUSIVE OF ALL THE MATERIALS, LABOUR CHARGES ETC., COMPLETE. 10 LOW STORAGE UNIT-(LSU) SIZE-(1'6" WIDTH x 3'0" HIEGHT) PROVIDING, FABRICATING AND FIXING LOW STORAGE SYSTEM WITH 19MM MARINE PLYWOOD STRUCTURE, 19MM MARINE BLOCK BOARD SHUTTERS AND 6MM MARINE PLYWOOD BACKING WITH EDGES FIXED WITH 6MM TEAK WOODEN LIPPING.THE STORAGE UNIT 3'0" HEIGHT FROM THE GROUND LEVEL AND 1' 6" CLEAR TOP WIDTH. THE UNIT SHALL BE PROVIDED WITH DRAWER , STORAGE UNIT , SHELVES ETC WITH ALL NECESARY FIXTURES LIKE ALUMINIUM DOOR HANDLES,BRASS HINGES, SLIDERS FOR DRAWERS, MAGNETIC CATCHER ETC.ALL EXPOSED SURFACES SHOULD BE LAMINATED WITH 1.5 MM THICK LAMINATE.THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. ALL EXPOSED EDGES OF BLOCK BOARD SHALL BE PROVIDED WOODEN BEADING (TEAK WOOD) AND 0'3" WIDE LAMINATED WITH BANK APPROVED COLOUR LAMINATE IN THE BOTTOM THE CABINET .INCLUDING COST OF ALL NECESSARY MATERIALS AND LABOUR CHARGES ETC COMPLETE.

UNIT

1.00

SFT

42.00

11 LOGO ON MAIN DOOR SUPPLYING AND FIXING STATE BANK OF MYSORE LOGO-STICKER ON EACH GLASS AS PER DRAWING AND DESIGN. 12 NOTICE BOARD -SIZE 3'0"X4'0" PROVIDING AND FIXING NOTICE BOARD 3'0"X4'0" SIZE USING 12MM SOFT BOARD COVERED WITH GREEN COLOUR UNITEX CARPET CLOTH AND WITH 25 X 25MM TEAK WOOD FRAME WORK IN ALL SIDES WITH 2 COATS OF POLISH INCLUDING COST OF ALL MATERIALS ETC. 13 VERTICAL VENETION BLINDS PROVIDING AND FIXING VERTICAL BLINDS OF 4" WIDE STRIP, COMPLETE AS PER ARCHITECTS DIRECTION. 14 FLAP DOOR PROVIDING AND FIXING FLAP DOOR OF SIZE 3'0" X 2'6" MADE OUT OF 19MM MARINE GRADE BLOCK BOARD STRUCTURE WITH EDGES FIXED WITH 6MM TEAK WOOD LIPPING AND 1.5 MM THICK TEAK WOOD LAMINATION ON BOTH SIDES, FITTED WITH BRASS HINGES AND TOWERBOLTS ETC., COMPLETE.

2.00 12.00

SFT

SFT SFT

165.00 18.00

Page 4

15 MAIN DOOR PROVIDING, FIXING AND FABRICATING MAIN DOOR MADE OF 12 MM THICK CLEAR FLOAT GLASS USING BANK APPROVED COLOUR POWDER COATED ALUMINIUM FRAME OF APPROVED MAKE MADE OUT OF 100 MM X 45 MM X 2.5 MM WITH ALL NECESSARY ACCESSORIES LIKE BEADINGS, SCREWS, RAWEL PLUGS INCLUDING SUPPLYING AND FIXING OF HEAVY DUTY FLOOR SPRINGS OF APPROVED MAKE, SUPPLYING AND FIXING OF 12 MM THICK PLAIN GLASS, 230 MM HEIGHT GREY COLOUR BRASS DOOR HANDLE, FLOOR SPRING AND ALSO INCLUDING MAKING DESIGN ON THE DOOR GLASS, COST OF MATERIALS AND LABOUR CHARGES ETC, COMPLETE AS PER DESIGN. 16 THREE SEATER SOFA. PROVIDING IN POSITION TWO SEATER CUSHIONED SOFA OF SIZE 1.50M X 0.60M X 0.80M USING 125MM X 50MM SALWOOD FRAME WORK FOR BORDERS AND 75MM X 25MM REAPER SUPPORT FOR THE SEAT AND BACK WITH 150MM COIR SPRING,GOOD QUALITY GUNNY AND COIR.100MM THICK FOAM SHALL BE USED FOR THE SEAT AND BACK WHICH SHALL BE COVERED WITH 100MM THICK SYENTHETIC FOAM AND GOOD QUALITY UPHOLYSTRY CLOTH OF APPROVED SHADE. 2 HAND REST SHALL BE PROVIDED WITH BOTH ENDS COVERED WITH "U" CHANNELS AND UPHOLYSTRY CLOTH.FOUR TURNED WOODEN LEGS OF HEIGHTS 10MM SHALL BE PROVIDED.THE RATE OF THE UPHOLYSTRY CLOTH SHALL BE RS.150/- PER METER. 17 SIDE TABLES FOR CASH COUNTER & SWC 1' 6" X 2' 6" PROVIDING, FABRICATING AND FIXING MANGER STORAGE SYSTEM WITH 19MM MARINE PLYWOOD STRUCTURE, 19MM MARINE BLOCK BOARD SHURTERS AND 6MM MARINE PLYWOOD BACKING WITH EDGES FIXED WITH 6MM TEAK WOODEN LIPPING. THE UNIT SHALL BE PROVIDED WITH A SLIDING KEY BOARD TRAY 2' 3" WIDE WITH SLIDERS, DRAWER, AND A CPU UNIT OF SIZE 1' 0" X 2' 0" UNDERNEATH THE DRAWER. THE DRAWER SHALL HAVE ALUMINIUM HANDLES , BRASS HINGES, SLIDERS FOR DRAWERS, MAGNETIC CATCHER ETC. WIRE MANAGER SHALL BE PROVIDED AT THE RIEGHT HAND CORNER OF THE TABLE TOP. ALL EXPOSED SURFACES SHOULD BE LAMINTED WITH 1.5 MM THICK TEAK WOOD LAMINATE. THE INTRENAL SURFACES SHOULD BE PAINDED WITH TWO COATES OF ENAMEL PAINT OVER A BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE. 18 SINGLE WINDOW COUNTER. PROVIDING, FABRICATING AND SINGLE WINDOW COUNTER SYSTEM MADE OUT OF 19 MM THIICK MARINE GRADE BLOCK BOARD ( APPROVED MAKE ) STRUCTURE WITH EDGES FIXED WITH 6MM TEAK WOODEN LIPPING, HAVING CLERICAL TOP 2'6" HEIGHT FROM THE GROUND LEVEL AND 2'6" CLEAR TOP WIDTH. TABLE TOP SHALL BE PROVIDED WITH 19 MM GRANITE TOP AND 12MM GLASS PARTITION OF 2'6" HIGH IN THE FRONT OF THE SW COUNTER OVER THE COUNTER TABLE AT 18" LEVEL LAND THE TRANSACTION OPENING WILL BE AT THIS LEVEL ONLY.THE SW COUNTER SHOULD HAVE SELF LOCKING SYSTEM DRAWER UNITS & DOOR. UNIT SHALL BE PROVIDED WITH A SLIDING.

SFT

45.00

NO.

2.00

RFT

13.50

RFT

10.00

Page 5

KEYBOARD TRAY 2'3" WIDE WITH SLIDERS, DRAWER WITH SLIDERS AND CUPBOARD BELOW THE DRAWER WITH LOCKING ARRANGEMENTS , ALUMINIUM HANDLES, BRASS HINGES ETC. THE FRONT, BACK AND TOP SURFACES SHOULD BE LAMINATED WITH 1.5 MM THICK RUBBER WOOD LAMINATE. THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. PROVISION FOR CPU STAND 1'0" X 2'0" AND FOOTREST OF SIZE 75MM X 38 MM SHALL BE PROVIDED AT BOTTOM. WIRE MANAGER SHOULD BE PROVIDED AT THE CORNER OF THE COUNTER TOP. ALL EXPOSED EDGES OF BLOCK BOARD SHALL BE PROVIDED WITH TEAK WOOD BEADING AND POLISHING ETC, COMPLETE. 19 SINGLE WINDOW COUNTER PARTITION WALL PROVIDING AND FIXING SW COUNTER PARTITION WALL MADE OUT OF WOODEN ( SAL WOOD ) FRAME WORK ( 3'' X 2'' ) OF OUTER SECTION AND INTERMEDIATE SECTIONS OF ( 2" X 2" ) AT 2'0" C / C BOTH WAYS FIXED FIRMLY TO THE TO WALLS AND FLOORS WITH SCREWS, CLAMPS ETC.BOTH SIDES SHALL BE PROVIDED WITH 6MM THK MARINE PLY WOOD SECURED FIRMLY TO THE FRAME WITH ADHESIVE AND CHROMODISED SCREWS AND 12 MM THICK CLEAR FLOAT GLASS PANNELS FOR ALL SIDES WITH 1.5 MM THK LAMINATE AND TEAK WOOD BEADING ON ALL EXPOSED EDGES .EACH CABIN SHALL HAVE ONE DOOR 2'6" X 5'0" SIZE WITH 6"HANDLES ON BOTH SIDES ,BRASS HINGES ,NIGHT LATCH, SELF LOCKING ARRANGEMENTS FOR DRAWER UNITS & DOOR . PROVISION FOR SLIP TRAYS.PARTITION WALL HEIGHT IS 5'0" FROM FLOOR LEVEL. 20 GYPSUM BOARD FALSE CELING FOR SERVER ROOM PROVIDING AND FIXING SUSPENDED FALSE CEILING WHICH INCLUDES PROVIDING AND FIXING G.I PERIMETER CHANNELS OF SIZE 0.55 MM THICK HAVING ONE FLANGE OF 20MM AND ANOTHER FLANGE OF 30MM AND A WEB OF 27MM ALONG THE PERIMETER OF THE CEILING, SCREW FIXED TO BRICK WALL / PARTITION WITH THE HELP OF NYLON SLEEVES AND SCREWS, AT 610 MM CENTRES. THEN SUSPENDING G.I. INTERMEDIATE CHANNELS OF SIZE 45MM, 0.9MM THICK WITH TWO FLANGES OF 15MM EACH FROM THE SOFFIT AT 1220MM CENTRES WITH CEILING ANGLE OF WIDTH 25MM X 10MM X 0.5MM THICK FIXED TO SOFFIT WITH G.I CLEAT AND STEEL EXPANSION FASTNERS. CEILING SECTION OF 0.55 MM, THICKNESS HAVING KNURLED WEB OF 51.5MM AND TWO FLANGES OF 26MM EACH WITH LIPS OF 10.5MM ARE THEN FIXED TO THE INTERMEDIATE CHANNEL AT 457MM CENTRES. 12.5MM, TAPERED EDGE GYPBOARD (CONFORMING TO IS –2095-1982) IS THEN SCREW FIXED TO THE CEILING SECTION WITH 25MM DRY WALL SCREWS AT 230MM CENTRES. SCREW FIXING IS DONE MECHANICALLY EITHER WITH SCREWDRIVER OR DRILLING MACHINE WITH SUITABLE ATTACHMENT. FINALLY THE BOARDS ARE TO BE JOINTED AND FINISHED SO AS TO HAVE A FLUSH LOOK WHICH INCLUDES FILLING AND FINISHING THE TAPERED AND SQUARE EDGES OF THE BOARDS WITH JOINTING COMPOUND, PAPER TAPE AND TWO COATS OF PRIMER SUITABLE FOR GYPBOARD (AS PER RECOMMENDED PRACTICES OF INDIAN GYPSUM OR EQUIVALENT) AND 2 COATS OF WINTER WHITE (CODE - 00015) COLOUR EMULSION OF NEROLAC ALLSCAPES MAKE OR EQUIVALENT.

SFT

160.00

SFT

200.00

Page 6

21 SERVER WORKING TABLE -(SWT)-SIZE 5'0"X2'0"X2'6" PROVIDING, FABRICATING AND FIXING SERVER WORKING TABLE MADE OUT OF 19 MM MARINE GRADE BLOCK BOARD, HAVING CLERICAL TOP 2'6" HEIGHT FROM THE GROUND LEVEL AND 2'0" CLEAR TOP WIDTH. TABLE SHALL BE PROVIDED WITH A SLIDING KEYBOARD TRAY 2'3" WIDE WITH SLIDER ,2NOS DRAWER ON EITHER SIDES AND CUPBOARD BELOW THE DRAWER WITH LOCKING ARRANGEMENTS , HANDLES, HINGES ETC. THE TOP SURFACES, AS WELL AS PROJECTING EDGES OF DRAWERS, CABINET SHALL BE PROVIDED 1.5MM THICK APPROVED COLOUR LAMINATE. THE REMAINING EXPOSED SURFACES SHOULD BE LAMINATED WITH 1.5MM THICK RUBBER WOOD LAMINATION.(FORMICA, DECOLAM/RAMAICA) .THE INTERNAL SURFACES SHOULD BE PAINTED WITH TWO COATS OF ENAMEL PAINT OVER A COAT OF PRIMER. PROVISION FOR CPU STAND 1'0" X 2'0" AND FOOTREST OF SIZE 75MM X 38 MM SHALL BE PROVIDED AT BOTTOM. WIRE MANAGER SHOULD BE PROVIDED TO THE COUNTER ETC., COMPLETE. 22 WOODEN WALL PANELLING FOR R.C.C. COLUMN PROVIDING AND FIXING WOODEN PANELLING FOR COLUMNS USING 38X 63MM SALWOOD FRAME WORK AT 600MM C/C HORIZONTALLY AND 1200MM C/C VERTICALLY AND SURFACE PROVIDED WITH 6MM THICK MARINE GRADE PLYWOOD FINISHED WITH 1.5MM THICK LAMINATE INCUDING APPLYING 100MM SKIRTING FOR BOTTOM WITH APPROVED COLOUR LAMINATE AS PER DESIGN.

RFT

8.00

SFT

260.00

TOTAL AMOUNT Rs.= ROUNDING OFF RS. = GRAND TOTAL AMOUNT RS. = AMOUNT IN WORDS (RUPEES ……………..………………………………………………………………………………... ONLY )

-

DATE : PLACE :-

CONTRACTOR SEAL WITH SIGNATURE

Page 7


								
To top