Going green, being eco-friendly, green building, are prevalent ideas which have been the rage for numerous years
now. Most people are responsive to the necessity to be as ecological conscious as possible, and to limit our carbon
footprint. Unfortunately, honestly doing this and living a more earth focused life is simpler said then done. When
thinking about heating and cooling the house, there truly is nothing glamorous about going green. Nevertheless, if
one is to actually do ones best at lowering his or her’s electric usage, the HVAC system needs to be the first place to
check for it's typically the house's largest source of energy usage says Heating and Cooling Sioux Falls SD.
Heating and Air Conditioning Sioux Falls' New Ways
to Go Green
Changing an existing heating and cooling system can be costly and for
most a luxury if it does not need swapping out. Once it is time for a
replacement HVAC unit however, there are many eco-friendly systems on
the market today which can help in utilizing less energy, being more
energy efficient. One place to start is by investigating Energy Star
Besides, or in addition to swapping out an HVAC unit, there are some
others things one can do to help reduce the home's energy usage. Test the
amount of insulation now in the house, the health of the windows and the
usage of floor coverings can greatly help in lowering a home's energy usage. Improper insulation will affect the
general performance of an HVAC unit by up to 30%. The insulation of duct work is vital too. Any duct work in attics,
crawlspaces and garages should really be adequately insulated. Generally, make certain there are no cracks in the
duct work. The average home looses about 20% of the air flow via duct work due to cracks. The by using a
programmable thermostat can certainly help reduce monthly electric bills. Energy experts suggest a winter setting
of 69 degrees and a summer setting of 78 degrees. During cold weather nights, lower it down to 55 degrees.
How to Establish a Whole-House Plan
In regards to generating a total home plan of things to analyze, the idea of "whole-house," here's a list of places to
Heating and Cooling Units, Duct work, Lighting, Insulation, Air Sealing, and Weatherization, Windows, Skylights,
and Exterior Doors, Hot Water Systems, Interior Walls and Ceilings, Air Cleaning, and Exterior Finishes.
The use of natural ventilation is very effective in cooling a house. The use of ceiling fans, window fans, whole-house
fans (like an attic fan), and also just opening windows during the night when the air temperature outside is cooler
than the indoors temperature, are fantastic inexpensive solutions. As for whole-house fans, if they are to be left
running for prolonged intervals, it does defeat the intent of lowering ones energy bills. Also, if pollen and dust are
concerns this may not be the best strategy. Even so, they certainly quickly pull hot air out from a home.
Without using solar pannels, one may tap into the usage of passive solar cooling. By growing deciduous trees on the
south, east and west sides of the home will provide shade in the summer and let more of the sunshine in throughout
the cold months of winter. Then, by growing evergreen trees on the north side of the home can certainly help shield
from winds in winter time. During the summer season, keep window drapes or blinds shut on south and west facing
windows in order to keep the house cooler. In the winter, open up the curtains or blinds to allow the sun's warmth
heat the home but don't forget to close them through the night to keep the cold air out.
We found the following article useful in terms of how to create a whole house plan:
Energy-saving tips: Creating a 'whole-house' energy efficiency plan ...
Did you know that the typical U.S. family spends about $1900 a year on home utility bills?
Unfortunately, a large portion of that energy is wasted. And each.
Windows and Doors
The usage of stick-on weather stripping to seal cracks around windows or doors should really be used. The base of
exterior doors need to have a rubber flap fitted at the base to form a tight seal while the door is shut, lowering the
utilization of ones HVAC unit.
Use lighting controls in order to reduce utilizing electricity. Controls can automatically turn off lights when not
being utilized, such as utilizing motion sensors, times, dimmers, or photosensors. Try to utilize the most energy
efficient bulbs and fixtures as possible too. If ones home permits, use natural light through windows throughout the
daytime as much as possible. Light colored paint on interior walls will help reflect the sun light too. Compact
fluorescent bulbs use 75% less electricity than incandescent bulbs and commonly last Much longer. They also give
off less heat than incandescent bulbs, which will help cool a house too, making less us of ones system.
Exterior Home Finishes
Finishes such as stucco, concrete, brick, steel, fiber-cement and aluminum are fantastic due to their longevity and
their capacity to not crack or deteriorate. Natural wood on a house's exterior demands a certain amount of routine
maintenance and expense in doing so.
Eco-Friendly Paint, The Complete Guide | Calfinder Remodeling Blog
They're also low odor and responsibly manufactured. If you're having trouble finding a specialty brand
or an eco-friendly paint on the Home Depot shelf, here's a quick and easy resource list for you. Acro
Pure ... Kwal Paint has an extensive line of environmentally friendly paints, finishes, and coatings
through their Green Life collection, which features over 50 products dedicated to environmental
attention. EnviroKote is a complete Kwal Paint Green Life product line for ...
Heating and Cooling Sioux Falls SD hopes this information will be beneficial in beginning or continuing to make
ones home more green and environmentally friendly!