067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
The fourth and final sheet (Facility Data Analysis (5-3-05).xls) is a summary sheet for the merged database. It contains the facility identification number, name, city, state, description, and SIC; Title V status; estimated total HAP usage per year (pounds (lb) and tons); solids usage per year; and estimated emission rate in lb HAP/lb solids. We did not include a facility on this sheet if they did not report any data on the solids content of their coatings and the lb HAP/lb solids emission rate could not be calculated. This fourth sheet is intended to show which facilities appear to be area sources either by their reported Title V status or by their total HAP consumption. Title V status may have only been based on criteria pollutant emissions and may not have been determined for HAP emissions at the time the surveys were completed. Total HAP consumption is not necessarily equal to HAP emissions, because some sources have add-on controls and HAP reductions from add-on controls were not included in this analysis. Please also note that for about 60 facilities we calculated that they used no HAP. In some cases they were, in fact, using non-HAP materials. However, in many others the facility was using solvent blends that may have contained some HAP, but the contribution of HAP from solvent blends was not calculated in this analysis. The emission rates included in the final summary sheet may differ from those that were used to support the development of the two major source rules (40 CFR 63, subparts MMMM and PPPP) for several reasons: 1. Some changes were made to the data in response to stakeholder comments in the development of subparts MMMM and PPPP, but these changes were made in spreadsheets that were derived from the databases and not in the original databases that were merged here. 2. These data do not segregate coatings into the coating types for which separate coating categories were established and for which emission rates were calculated by coating scenario. 3. These data do not account for the effect of add-on controls which may have controlled all or part of the coating operations at a facility. 4. After the data were merged, some additional quality assurance checks were made to assure that each ingredient was treated consistently as either a HAP or non-HAP and the data were updated to reflect that some ingredients have been removed from the list of HAP. For example, we tried to assure that isocyanate monomers were treated as HAP, but the isocyanate polymers were not. We changed the status of ethylene glycol monobutyl ether (CAS 111-76-2) to non-HAP since it was de-listed in November, 2004. Finally, we made sure that all ingredients within a CAS, including inorganic compounds, were treated consistently as HAP or non-HAP. We have included a column in Form B that indicates those ingredients for which the HAP status was corrected. Reported Title V Reported FACID ASC0004 ASC0008 ASC0009 ASC002 ASC002B Facility_name Nissan Motor Manufacturing Corporation, USA Toyota Motor Manufacturing, Kentucky New United Motor Manufacturing (NUMI) Honda of America Mfg., Inc. - East Liberty Honda of America Mfg., Inc. - Marysville City Smyrna Georgetown Freemont East Liberty Marysville State TN KY CA OH OH Total HAP (lbs) 139,702.40 1,015,908.78 107,438.43 51,689.14 77,095.11 Total HAP (tons) 69.85 507.95 53.72 25.84 38.55 Status Total Solids (lbs) 190,825.03 1,181,301.70 205,697.69 281,041.33 585,985.49 lbs HAP/lbs solids 0.73 0.86 0.52 0.18 0.13 Paint grouped sheet metal and polymer body panels. Both reprocess and fascia lines under BACT determinations different from the major panel line 0.38 determinations. 0.07 STEEL FOUNDRY FOR THE MANUFACTURE OF RAILROAD UNDERCAR 0 FRAME PARTS 3325 0.20 Manufacturer of Truck Trailers SST Truck Co.,LLC. Is contracted to assemble Paystar 5000 severe service 0 vehicles for Navistar. 1.77 Manufacturer of Ride Control Articles. (Shock Absorbers). 99.63 Manufacturer of Industrial Razor Blades. Manufacturer of air cooled heat exchangers and equipment for the oil and gas 1.07 industry. Job shop providing a variety of coatings for corrosion resistance and appearance enhancement for the metal parts manufacturing industry. 2.95 Electroplating and surface finishing. 1.56 Magnet wire coating facility 2.09 450,000 SQ. FT. CLASS 8 TRUCK ASSEMBLY PLANT 0.12 Manufacture-Fabricate and assembly of automatic temperature controls. 0.60 Manufacturer of customized heavy duty truck tractors 0.01 Manufacturer of Woven Wire Cloth. Aluminum extrusion, billet casting, and extrusion coating. (Producer of 0.13 aluminum extrusions, extrusion ingot, and painted extrusions.) 3.63 See hard copy of survey for additional information. 3.72 Metal preparation & rubber mixing, milling, extrusion & curing. Various forms of bulk sheet metal are cut, punched, formed, assembled, and painted in the production of pickup tool boxes, light to medium duty 0.16 service/utility truck beds and smaller truck equipment accessories. 0.71 Manufacturer of galvanized steel tubes and black steel tubes Fabrication of cross members used in truck trailer assembly. (Steel 0 Fabrication) Electric motor manufacturer. Processes include die casting, machining, 3.86 winding, stamping, assembly and packaging. 100 year old manufacturer, 650,000 sqft on 24 acres. (The facility consists of a grey and ductile iron foundry and a steel conveyor pulley manufacturing 0.42 operation located on 21 acres of land.) 2.09 0.71 0.46 2.02 2.01 3.73 Manufactures Steel Drums. Paint Outside and Line Inside Manufactures Steel Pails. Paint Outside and Line Inside. Manufactures Steel Drums. Paint Outside and Line Inside. Manufactures Steel Drums. Paint Outside and Line Inside. Manufactures New Steel Drums. Paint Outside and Line the Inside. Truck body manufacturer 3715 3711 3714 3421 3443 Facility_Description SIC
ASC0032 ASC010H MMPP-0002 MMPP-0016 MMPP-0029 MMPP-0037 MMPP-0042 MMPP-0044
Saturn Corporation Daimler Crysler Toledo Assmebly Plant I American Steel Foundries Pines Trailer a Division of Great Dane Limited Pa SST Truck Co.,LLC. Tenneco Automotive / Monroe American Safety Razor, Inc. Hudson Products Corporation
Toledo Granite City Kewanee Garland Cozap Verona Beasley
TN OH IL IL TX NE VA TX
210,596.63 160,538.22 0 22,188.98 0 255,268.02 927,199.99 20,921.19
105.30 Unknown 80.27 0 Major source 11.09 Major source 0 Major source 127.63 Major source 463.60 Major source 10.46 Major source Minor or area source Major source Major source Major source Major source Major source
561,392.40 2,357,514.97 77,346.50 111,585.41 21,498.64 144,208.28 9,305.99 19,549.28
MMPP-0049 MMPP-0066 MMPP-0070 MMPP-0072 MMPP-0076 MMPP-0081 MMPP-0088 MMPP-0102 MMPP-0106
Metal Finishing Company Inc. MagneTek PETERBILT MOTORS COMPANY White-Rodgers Co. Peterbilt Motors Company Hanover Wire Cloth Wells Aluminum Corp. Cooper Engineered Products - El Dorado Plant Cooper Engineered Products - Auburn Plant
Wichita Gallman DENTON St. Louis Madison Hanover Monett El Dorado Auburn
KS MS TX MO TN PA MO AR IL
44,775.29 860,765.75 1,104,681.79 68.96 399,253.91 3,234.40 62,869.80 175,934.81 926,453.40
22.39 430.38 552.34 0.034 199.63 1.62
15,191.44 553,180.34 529,535.29 592.45 664,368.03 271,095.35 478,488.86 48,428.82 248,859.05
3728 3357 3711 3822 3713 3496 3365 3061 3069
31.43 Major source 87.97 Major source 463.23 Major source
MMPP-0119 MMPP-0120 MMPP-0122 MMPP-0123
Rawson-Koenig, Inc. Western Tube & Conduit Corporation J & L Structural, Inc., Ambridge Division Franklin Electric Company, Inc.
Houston Carson Ambridge Bluffton
TX CA PA IN
12,907.57 312,526.21 0 141,947.89
6.45 Unknown 156.26 Major source 0 Major source 70.97 Major source
82,770.15 438,753.96 31,080.00 36,787.92
3713 3317 3715 3621
MMPP-0158 MMPP-0164 MMPP-0166 MMPP-0168 MMPP-0169 MMPP-0170 MMPP-0171
Dodge - Rockwell Automation Van Leer Containers Van Leer Containers, Inc. Van Leer Containers, Inc. Van Leer Containers, Inc. Van Leer Containers, Inc. Supreme Corp
Mishawaka Worminster Greenville Florence Canton Alsip Goshen
IN PA OH KY MS IL IN
16,775.09 1,429,120.77 297,830.90 188,280.10 911,581.22 1,610,132.28 32,758.45
714.56 148.92 94.14 455.79 805.07 16.38
8.39 Major source Synthetic minor source Major source Major source Major source Major source Major source
40,388.33 684,788.25 420,562.09 412,992.68 450,977.27 800,779.85 8,783.35
3321 3412 3412 3412 3412 3412 3713
Page 1 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Reported Title V Status
Total Solids (lbs)
lbs HAP/lbs solids
MMPP-0173
AmTran Corporation
Conway
AR
194,321.35
97.16 Major source
525,381.57
MMPP-0175 MMPP-0178 MMPP-0180 MMPP-0182 MMPP-0186 MMPP-0187 MMPP-0189 MMPP-0191 MMPP-0197 MMPP-0202 MMPP-0203 MMPP-0212 MMPP-0217
PACCAR Winch Division (aka Braden Carco Gearmatic) Coffeyville Re-Con, Inc. Volvo Trucks North America, Inc. ABB Power T&D Company, Inc. - ISD Division Kline Iron & Steel Company Inc. Kline Iron & Steel Company Inc. The Loxcreen Company, Hayti, Missouri GM POWERTRAIN-TONAWANDA ENGINE PLANT Konstant Products Inc. Country Coach Inc Gunderson Inc Berenfield Containers(SE), Ltd.-see comment sheet GM- Metal Fabricating Division Grand Blanc
Broken Arrow Coffeyville Dublin Raleigh West Columbia Columbia Hayti Buffalo Quincy Junction City Portland Harrisburg Grand Blanc
OK KS VA NC SC SC MO NY IL OR OR NC MI
7,634.15 131,241.59 122,436.18 3,371.68 55,944.33 46,664.34 0 1,611.37 122,261.35 7,721.86 479,590.81 83,141.52 0
Minor or area 3.82 source 65.62 Major source Synthetic minor 61.22 source 1.69 Major source 27.97 Major source 23.33 Major source 0 Major source 0.81 Major source 61.13 Major source 3.86 Major source 239.80 Major source 41.57 Major source 0 Major source
270.34 97,020.00 1,184,572.84 11,096.19 320,151.80 19,850.32 163,231.42 99,280.42 379,325.62 6,392.80 192,250.17 223,937.22 119,391.33
Reported Facility_Description SIC Manufacturer of integrated bus product, bus bodies, bus chassis, and medium duty truck chassis. (Manufacturer of bus bodies and medium duty truck 0.37 chassis) 3713 Heavy duty winches are manufactured at this facility and can be distinguished from other miscellaneous metal parts surface coating operations in the following areas: color is customer specified, weather resistant coatings, salt 28.24 water protective coatings, 3531 1.35 Oil drum reconditioning 3412 0.10 Heavy Duty (Class 8) trucks are manufactured at this plant Manufacture single phase and polyphase electric meters consisting of 0.30 painting, degreasing, and coating processes 0.17 Metal fabricating job shop 2.35 Metal fabricating job shop Aluminum extrusion plant with electrostatic paintline and anodize finishing 0 operations. We receive painted castings, we machine the castings, assemble automotive 0.02 and marine engines. 0.32 Weld and paint structural steel warehouse storage rack systems 1.21 Motor home manufacturing 2.49 A 75-acre manufacturing facility that produces railcars and marine barges 3713 3825 3441 3441 3354 3714 3499 3716 3731
MMPP-0218 MMPP-0222 MMPP-0236 MMPP-0243
Caldwell Tanks, Inc. Yale Security Wabash National Corporation ESCO Corporation (Main Plant)
Louisville Monroe Lafayette PORTLAND
KY NC IN OR
46,752.45 90,043.21 46,549.00 0
23.38 Major source Synthetic minor 45.02 source 23.27 Major source 0 Major source Synthetic minor 1.09 source 5.85 Major source 41.71 Major source 65.42 Major source 24.61 Major source Synthetic minor 0 source 70.56 Major source Synthetic minor 12.05 source 4.47 Major source 8.24 Major source
142,899.43 26,247.60 2,430,530.00 52,080.00
0.37 Manufactures 55 gallon steel drums. 3412 Metal stamping facility with spotweld assembly operations; maintenance 0 coating processes only 3465 Steel plates are taken from storage and sent through steel shot blast systems to remove rust and mill scale. The plates are then cut to desired dimensions and formed into various parts for water tanks. The parts are then sent 0.33 through the paint booths fo 3443 3.43 Manufacturer of door closures and installation hardware 0.02 Truck Trailer Manufacturer Steel foundry utilizing sand molds to cast wear parts for the mining and 0 construction industry Manufacturer of electrical and electronic equipment process including metal forming, metal finishing and painting, printed circuit coard soldering and 0.08 assembly 0.02 metal building fabricator 0.45 Manufacture steel drums (55-gallon) coating facility, processing primarily auto parts, with powder coat, e-coat and 0.12 spray coating facility manufacturers various types of steel storage tanks; tanks are welded 0.45 and spray coated at the facility Metal building systems sales, engineering and fabrication. (Production of rollformed and built-up steel building components, which are subsequently 0 painted) 2.27 Recondition 16-, 30-, and 55-gallon steel drums Manufacturer of fractional horsepower electrical motors and components used 0.18 for fractional electrical motors. 0.19 Diesel engine manufacturing and R and D diesel engine 0.18 manufacture of electric motors and stators Diesel Engine Plant (gray iron foundry and engine manufacturing plant that produces automotive castings and finished machined, assembled, and tested 0.27 medium-duty diesel engines for the truck market) 0.09 Manufacture ductile iron pipe and fittings 2.47 Fabricating, anodizing, and/or painting of architectural aluminum Geographical globe manufacturing using cardboard, metal parts for assembly, 1.27 plastic and wood parts as assembled parts 0.18 Metal fabrication manufacture of conveyor systems. 2.78 Engineer and manufacture various products for transportation and defense Produce Aluminum Windows, doors and extrusions. Processes include: 0.52 extrusion, anodizing, painting, fabrication & assembly. production of automotive and heavy equipment filters; coating of metal 0.00 containers used in the production of spin-on oil and hydraulic filters 250000 sq ft manufacturing facility on 25.3 acres of land. Manufacture 0.02 fractional horse power electric motors 0.28 Delivery van body builder - fabrication, assembly, and painting 3429 3715 3321
MMPP-0244 MMPP-0245 MMPP-0270 MMPP-0279 MMPP-0281
Dukane Corp NCI Building Systems, L.P. Florida Drum Division Miller Products, Inc Bigbee Steel and Tank
St. Charles Houston Pine Bluff Grand Rapids Manheim
IL TX AR MI PA
2,181.98 11,704.73 83,418.16 130,846.77 49,212.02
27,040.84 572,582.53 185,985.57 1,087,027.85 109,707.65
3669 3448 3412 3714 3443
MMPP-0282 MMPP-0284 MMPP-0286 MMPP-0287 MMPP-0330
Nucor Building Systems Allied Drum Service Inc. Emerson Electric Company Navistar International Transportation Corporation A.O. Smith Electrical Products Company
Swansea Louisville Rogers Melrose Park Mebane
SC KY AR IL NC
0 141,128.15 24,092.11 8,937.48 16,477.00
56,836.08 62,221.33 133,166.52 47,240.95 93,828.52
3448 7699 3621 3519 3621
MMPP-0337 MMPP-0340 MMPP-0346 MMPP-0347 MMPP-0349 MMPP-0356 MMPP-0372 MMPP-0389 MMPP-0408 MMPP-0413
Indianapolis Casting Corporation Griffin Pipe Products Co. Leed Himmel Industries, Inc. Replogle Globes Inc. Dearborn Mid-West Conveyor Co. AAI Corporation Three Rivers Aluminum Company, Inc. Fleetguard-Cookeville Plant Emerson Electric Company Union City Body Co L.P.
Indianapolis Lynchburg Hamden Broadview Kansas City Cockeyesville Cranberry Township Cookeville Independence Union City
IN VA CT IL KS MD PA TN KS IN
11,959.56 55,408.78 37,654.77 19,525.63 18,396.44 14,890.34 1,136,414.32 107,235.24 531.99 83,616.53
5.98 Major source 27.70 Major source 18.83 Major source 9.76 Major source 9.20 Unknown 7.45 Major source 568.21 Major source 53.62 Major source 0.27 Major source 41.81 Major source
44,409.60 615,993.71 15,223.50 15,413.22 102,104.73 5,365.08 2,172,106.61 28,362,489.73 26,541.76 297,138.47
3714 3321 3446 3999 3535 3699 3354 3714 3621 3713
Page 2 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-0424 MMPP-0427 MMPP-0430 MMPP-0438 MMPP-0439
Facility_name E/M Engineered Coating Solutions Marion Composites Reed Tool Company Steelox Systems Inc. MagneTek Lombard Marion Houston
City
State IL VA TX OH TN
Total HAP (lbs) 169,456.81 131,265.99 0 0 97,257.34
Total HAP (tons)
Reported Title V Status Minor or area 84.73 source 65.63 Major source 0 Major source 0 Major source 48.63 Major source
Total Solids (lbs) 28,119.40 101,028.37 1,104.63 190,400.50 646,444.01
lbs HAP/lbs solids
Reported Facility_Description SIC 46,000 sq/ft Cinder Block & Steel Building, used for the Application of 6.03 Engineered Specification Coatings. 3479 Manufacturing of parts for the aerospace industry and portable shelter building 1.30 for housing high value equipment 3728 0 manufacture premium rock bits for the oil industry 3533 0 Manufacturer of metal buildings, including frame work, roofing, wall panels. 0.15 Facility manufacturers motors and generators Manufacture construction equipment including the fabrication, machining, coating and assembly necessary to produce loaders, skidders, graders, and 0.36 excavators. Small DC electric motor manufacture for the automotive industry with metal 0.99 working, coating and assembly operations. 0.08 The facility is a large machine shop 0.63 Manufacturer of bolted steel storage tanks for liquid and dry products Lofton Corp. is a 200,000 square foot sheet-metal job shop fabricating custom 0.85 metal products and marine furniture. 0.00 Metal Stamping 0.41 Manufacturer of New Steel Drums From 12 Gallon to 90 Gallon. 1.15 Electric Motor Manufacturing Company 1.58 Van Conversion 0.21 Manufacturer of 55 gallon steel drums 0.32 Repair and overhaul railroad locomotives. Manufacturing of metal products including livestock equipment, metal buildings and grain bins/dryers. Processes include metal forming, welding, 0.96 galvanizing, and painting. 0.23 Manufacturer of automotive Components and finished vehicles. 0.23 55 Gallon Steel Drum Manufacturer Ampcor II, Inc. is a manufacturer of casket hardware. The hardware is produced by steel stamping and rollforming, plastic injection molding and zinc hand casting. In addition, some components are supplied by vendors, while 2.12 others are sent by customers f 0.41 An aluminum extrusions operation with a vertical painting facility. Primary steel manufacturing facility, including melt shop, plate rolling mill, heat 0.45 treating facility, and plate coating line 3448 3621
Washington C.H. Lexington
MMPP-0442 MMPP-0444 MMPP-0456 MMPP-0458 MMPP-0460 MMPP-0469 MMPP-0470 MMPP-0475 MMPP-0479 MMPP-0483 MMPP-0485
John Deere Davenport Works ASMO North Carolina, Inc. Allison Transmission Division GMC A.O. Smith Engineered Storage Products Company Lofton Corporation GM Pontiac Site Operation Nesco Container Corporation General Electric Industrial Systems, Inc. Glaval Corporation CP Louisiana, Inc. Union Pacific Railroad - Jenks Shop
Davenport Statesville Indianapolis Parsons Raphine Pontiac Fenton Tell City Elkhart Jefferson N. Little Rock
IA NC IN KS VA MI MO IN IN LA AR
71,196.93 62,613.24 205.11 353,873.53 91,071.45 117.06 139,053.90 28,654.39 74,926.48 35,459.56 21,175.00
35.60 Major source 31.31 Major source 0.10 Major source 176.94 Major source Major source Major source Major source Major source Major source Minor or area 17.73 source 10.59 Major source 45.54 0.059 69.53 14.33 37.46
199,767.84 63,541.56 2,552.00 564,872.21 107,674.88 991,254.02 340,599.98 24,947.11 47,515.12 171,938.72 66,071.95
3531 3621 3568 3443 3499 3714 3412 3621 3711 3412 4011
MMPP-0493 MMPP-0495 MMPP-0496
Behlen Mfg. Co. GM NAO Flint Operations Evans Harvey, Inc., L.L.C.
Columbus Flint Harvey
NE MI LA
269,473.68 5,822.47 139,025.88
134.74 Major source 2.91 Major source 69.51 Major source
281,736.77 24,913.64 607,511.12
3523 3711 3412
MMPP-0499 MMPP-0500 MMPP-0501 MMPP-0502
AMPCOR II, Inc. Alumax Extrusions, Inc. Oregon Steel Mills, Inc. Rocky Mountain Steel Mills
La Porte Hernando Portland Pueblo
IN MS OR CO
346,329.04 1,006,517.27 11,880.45 5,351.92
173.16 Major source 503.26 Major source 5.94 Major source 2.68 Major source Minor or area source Minor or area source Synthetic minor source Synthetic minor source
163,675.80 2,474,696.17 26,517.10 63,869.74
3995 3354 3312
MMPP-0503 MMPP-0504 MMPP-0508 MMPP-0511 MMPP-0513 MMPP-0520 MMPP-0532
Modine Manufacturing Company Modine Manufacturing Company Modine Manufacturing Company Suburban Manufacturing Co. ALLIEDSIGNAL AEROSPACE EQUIPMENT SYSTEM Tomkins Industries - Dexter Axle Division Sirco Systems, LLC
Blythewood Buena Vista Emporia Dayton TORRANCE Albion Birmingham
SC VA KS TN CA IN AL
0 0 0 39,631.47 215.26 131,012.24 313,299.51
0 0 0 19.82
19,875.00 55,000.00 91,558.50 57,312.90 129.26 144,064.45 205,250.44
0.08 Steel manufacturer making railroad rail, seamless pipe, and rod/bar products. 3312 Manufacturer of aluminum oil coolers for the automotive industry. This facility uses a HAP-free powder painting process. However, some touch-up paint is 0 done with aerosol cans. 3714 Heat transfer equipment manufacturing with a powder paint surface coating 0 operation. There are no HAP emissions for this operation. 3634 0 Manufacturing facility producing copper/brass radiators. PTAC units and RV components (water heaters, various furnaces, cooktops, 0.69 and ovens) MANUFACTURE AND REPAIR AND OVERHAUL OF MISC. AEROSPACE 1.67 COMPONENTS. 0.91 Manufacture of axle components and brake assemblies. 1.53 The facility is engaged in the manufacturing of steel drums and containers. Chicago Hgts. Steel is a roling mill using rairoad rail and bittet to produce 0.02 fence and sign posts and merchant bar products. Painted and un-painted. 0.08 Manufacture of dry specialty transformers 2.21 Manufacturer of truck flat bed and low boy trailers. Drum reconditioning facility which removes foreign material from drums by 0 burning and or physical removal and then repainting drums for reuse. 0.21 Fabricate new railcars 0.13 manufactures steel toy trucks manufacturer of school and transit buses and motor homes. Processes 0.52 include fabrication, assembly, welding, and painting. Manufacturer of towable recreational vehicles (campers ie: travel trailers & 0.08 fifth wheel trailers). 0.17 Manufacture of ignition modules and alternaters for vehicles 3714 3585 3728 3714 3412
0.11 Major source 65.51 Major source 156.65 Major source
MMPP-0537 MMPP-0542 MMPP-0543 MMPP-0558 MMPP-0561 MMPP-0563 MMPP-0567 MMPP-0570 MMPP-0571
Chicago Heights Steel GE Specialty Transformer Manufacturing Plant Great Dane Trailers Memphis TN Plant Allied Hastings Barrel and Drum Service Trinity Industries, Inc. Nylint Corporation Blue Bird Body Company/Blue Bird Wanderlodge Carriage, Inc. Delphi Energy and Engine Management Systems
Chicago Heights Fort Wayne Memphis Chicago Saginaw Rockford Fortt Valley Millersburg Anderson
IL IN TN IL TX IL GA IN IN
13,641.15 16,786.60 364,034.92 0 61,437.31 4,548.76 294,309.10 3,245.93 21,040.80
6.82 Major source 8.39 Major source 182.02 Major source 0 Major source 30.72 Major source Minor or area 2.27 source 147.15 Major source 1.62 Major source 10.52 Major source
723,034.69 208,498.59 164,508.99 146,431.90 293,435.45 36,046.07 560,806.21 40,674.26 121,057.20
3312 3612 3715 5085 3743 3944 3716 3792 3714
Page 3 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Status Reported SIC 3312 3441 3441 3631 3714 3714 3792 3531
FACID MMPP-0577 MMPP-0578 MMPP-0583 MMPP-0585 MMPP-0588 MMPP-0596 MMPP-0599 MMPP-0605
Facility_name Keystone Steel and Wire Company Carolina Steel Fabrication, Greensboro Plant Gooder-Henrichsen Co., Inc. The Ducane Company Atlantic Research Corporation Monroe Stamping Plant Monaco Coach Corporation John Deere Dubuque Works Peoria
City
State IL NC IL SC AR MI IN IA
Total HAP (lbs) 19.44 5,367.48 0 208,296.01 26.27 9,106.20 13,561.65 125,439.97
Total HAP (tons)
Total Solids (lbs) 1,102.31 46,728.12 67,305.60 3,811.02 1.92 494,178.90 54,178.19 424,249.84
lbs HAP/lbs solids
Greensboro Chicago Hgts. Blackville East Camden Monroe Wakarusa Dubuque
0.010 Major source Minor or area 2.68 source 0 Major source 104.15 Major source 0.013 Major source 4.55 Major source Synthetic minor 6.78 source 62.72 Major source Synthetic minor 2.12 source
Facility_Description Vertically integrated steel and wire mill taking scrap steel and producing 0.02 finished wire products at one facility
MMPP-0609
Modine Manufacturing Company
LaPorte
IN
4,233.56
60,652.01
MMPP-0613 MMPP-0628 MMPP-0636 MMPP-0638 MMPP-0641 MMPP-0642 MMPP-0645 MMPP-0657 MMPP-0658 MMPP-0666 MMPP-0669 MMPP-0670 MMPP-0704 MMPP-0710 MMPP-0716 MMPP-0718 MMPP-0730 MMPP-0732 MMPP-0734 MMPP-0740
Great Dane Trailers White-Rodgers Division Marysville Motorcycle Plant EQUIMETER, INC. (PLANT 1) Munster Steel Company, Inc. United Structures of America, Inc Houston Facility Monaco Coach Corporation
Brazil Harrison Marysville DUBOIS Munster Houston Wakarusa
IN AR OH PA IN TX IN NE IN IN TX MO OH IN OK NV TN AL KY IL
196,596.30 47.75 76,781.38 0 3,608.43 91,396.80 47,463.91 21,376.84 0 34,532.14 420.24 422.29 1,008,183.61 1,916.86 57,342.78 0 4,496.64 3,744.00 1,554,623.70 34,122.16
98.30 Major source 0.024 Major source 38.39 Major source Minor or area 0 source 1.80 Unknown 45.70 Major source 23.73 Major source Minor or area 10.69 source Synthetic minor 0 source 17.27 Major source Minor or area 0.21 source Minor or area 0.21 source 504.09 Major source Minor or area 0.96 source 28.67 Major source 0 Major source 2.25 Major source 1.87 Major source 777.31 Major source 17.06 Major source Synthetic minor 1.54 source
1,159,672.42 6,092.46 246,394.75 67,503.35 20,160.31 297,039.60 505,021.84 59,170.04 44,085.60 133,983.73 1,748.67 941.83 177,352.38 23,805.12 208,519.20 157,138.84 37,528.70 1,981,032.49 1,101,598.37 222,389.96
0.11 manufacture of structural steel components 0 Fabricator of Open Web Steel joist, longspans and girders 54.66 Manufacture warm air gas and oil furnaces and gas bbq grills Manufacture solid rocket propellants, solid rocket motors, rocket and missile 13.71 systems, warheads and ordnance, air bag igniters and related 0.02 Automotive systems, metal stamping, and hot form plant travel trailer MANUFACTURING FACILITY INCLUDING CHASSIS 0.25 CONSTRUCTION, VEHICLE ASSEMBLY AND PAINT 0.30 Construction machinery and equipment manufacturing Manufacturer of heat transfer equipment for heavy duty industrial and automotive applications. Process uses copper, brass, steels, solder and paint 0.07 in production quantities. Fabrication and assembly of truck trailers. Process includes molding, cutting, shoes, presses, punches, phosphating, surface coating (painting), and 0.17 cleaning of trailers, and foam injection. Manufacture ( Fabrication and Assembly) of automatic temperature controls 0.01 and air cleaners. Manufacturer of motorcycles, ATVs and other transportation related 0.31 equipment MANUFACTURER OF GAS METERS, REGULATORS AND RELATED 0 PRODUCTS. Structural steel fabrication: flame or mechanically cut steel, abrasive blasting, 0.18 and spray coating. 0.31 Manufacturer of Pre-Engineered Metal building Components Motorhome assembly facility including fiberglass lamination, sidewall 0.09 assembly, metal fabrication, paint and final inspection. Fabricates steel doors, windows and furniture for the corrections facility 0.36 industry. Trailer and utility axle manufacturers. Primary process - welding assembly & 0 painting. Metal fabrication of automotive and heavy duty engine components. Some of 0.26 these items are painted or coated, also metal heat treating. 0.24 Diesel engine service center, railcar maintenance shop, railroad switchyard 0.45 Repair and overhaul railroad equipment Manufacturer of molded rubber products for the automotive, military, and 5.68 industrial products industries. Manufacture of circuit breakers, reclosers, oil insturment transformers and 0.08 arresters for electrical distribution and substation protection. Steel mill (mini). Two electric arc furnaces, billet caster, rolling mill and post 0.28 (tee) processing facility. 0 Manufacturing of Steel Joists and Metal Decking. 0.12 Electric Motor Manufacturing Plant Manufacturer of steel joints, joist girders, related products, steel roof and floor 0.00 deck. Draw and roll copper and aluminum rod into magnet wire conductor. Apply 1.41 various insulating enamel coatings to the drawn conductor. 0.15 Manufacture and coating of fans, radiators, and tree stands Manufacture of products using shearing, forming, cleaning, welding, brazing, 0.05 soldering, assembly, testing, painting, and packaging operations. Hart and Cooley is a manufacturer of metal stamped grilles, registers, diffusers, and vent pipe for the HVAC industry. Also manufacture flexible duct 0.00 which is not related to MM coating. 4.78 Manufacturer of furniture hardware and related products. 0.66 Electric Motor Manufacturing Plant The facility manufactures valves using gray and ductile iron castings. This includes a foundry that pours gray and ductile iron, a machine shop and 1.21 assembly departments. 0.19 Manufacturer of mobile hydraulic cranes. Manufacturer of heat exchangers, oil, and charge air coolers for heavy duty 0.98 and industrial manufacturers of off highway and stationary equipment. 0.22 Manufacturing facility producing unit & baseboard heaters.
3433
3715 3822 3751 3824 3441 3448 3716 3442 3714 3714 4011 3743 3069 3643 3312 3441 3621 3441 3357 3564
Chief Industries, Inc. - Custom Products Division Grand Island Dexter Axle Division - Plant 12 Arvin Exhaust - 17th Street Plant Union Pacific Railroad - Centennial Yard Union Pacific Railroad - System Signal Shop Goodyear Tire & Rubber Co. - St. Marys, OH Plant ABB Power T&D Company, Inc. Sheffield Steel Corporation Valley Joist General Electric Industrial Systems, Inc. Vulcraft (Al) Phelps Dodge Magnet Wire Company Lakewood Engineering and Manufacturing Company Fremont Columbus Fort Worth Sedalia St. Marys Bloomington Sand Springs Fernley Murfreesboro Fort Payne Hopkinsville Chicago
MMPP-0744
Modine Manufacturing Company
Pemberville
OH
3,086.25
61,724.92
3714
MMPP-0770 MMPP-0774 MMPP-0779
Hart and Cooley, Inc. Keeler Brass Company General Electric Industrial Systems
Holland Grand Rapids Springfield
MI MI MO
849.94 210,653.43 122,392.81
0.42 Major source 105.33 Major source 61.20 Major source
503,864.00 44,062.70 185,352.41
3444 3429 3621
MMPP-0780 MMPP-0785
Nibco Inc., Blytheville Division Broderson Manufacturing Corporation
Blytheville Lenexa
AR KS
32,445.10 4,216.67
16.22 Major source 2.11 Unknown
26,766.81 21,979.97
3491 3537
MMPP-0788 MMPP-0789
Modine Manufacturing Company TRT Heating Products Inc.
Washington West Kingston
IA RI
23,160.29 6,878.25
11.58 Major source Minor or area 3.44 source
23,521.51 31,723.65
3443 3433
Page 4 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-0799 MMPP-0804 MMPP-0821
Facility_name ABB Power T&D Company, Inc. Harley-Davidson Motor Company Hytek Finishes Company
City South Boston York Kent
State VA PA WA
Total HAP (lbs) 256,009.99 175,507.48 26,905.01
Reported Title V Total HAP (tons) Status 128.00 Major source 87.75 Major source Synthetic minor 13.45 source
Total Solids (lbs) lbs HAP/lbs solids Facility_Description 19,969.52 12.82 Manufacture Small Power Liquid Filled Transformers The facility manufactures and assembles motorcycles and motorcycle 309,885.94 0.57 components. 42,064.46 0.64 JOB SHOP-- Metal finishes. Manufacturing and assembly of automotive components using phosphate coating, machining, welding, grinding, polishing, finishing, burrishing, impact and pressure deformation, heat treating, brazing, painting, calibration and 0.79 shearing. YKK AP is a aluminum extrusion facility producing architectural aluminum 1.66 products. 0.61 Manufacturer of aluminum doors, windows, and extrusions 0.53 Manufacturer of compositecan ends (metal). Applies adhesive to metal inserts that rubber is bonded to offsite to produce 6.24 automotive componets. Manufacture Steel Tubing. Two of the three production lines are galvanized 1.09 with the third running black tube. 85.29 Mfg. original equiptment auto interior plastic parts. Vertically integrated motor home manufacturing facility that includes vacuum forming and rotocasting of plastics, aluminum extrusion, cabinet making, and 0.15 surface coating of steel, plastics, aluminum, and wood. 2.62 Drawing & Insulating of copper and aluminum wire 2.08 Drawing & Insulating of copper and aluminum wire 0.47 Manufacturer of steel industrial shipping containers 0.58 Steel Drum manufacturing Assembly of Semi-Trailers including Fabricating, cutting, welding, abrasive 0.04 blasting, painting, sealing and polyurethane foaming. Aluminum extruding facility with the following operations: alloying/billet-making, 0.68 extrusion, die-making, anodizing, painting, and thermal-break. 1.35 Metal extrusions, window manufactures 0.22 Manufacturer of heat transfer equipment Manufacture of aluminum oil coolers for off-highway applications (see 0 comments). The facility manufactures and assembles wheel loaders and excavators 0.12 described as Heavy-Off-Highway Equipment 0.00 Manufacturing of Metal Joists, girders and miscellaneous acessories. 0.09 Electric Motor Manufacture 0.16 Production of rolled steel product Manufacturer of vehicular radiator cores. This facility paints only a few units 0 per month with a non-HAP containing coating. 0.17 Railcar (Rail Hopper Cars) manufacturing plant. 0.11 Railcar (Railroad Tank Car and Railroad Hopper Car) Manufacturing Plant. 0.00 Mini-mill manufacturing 0 Manufactures industrial blowers 0.04 Fabricates structural steel and miscelaneous metal parts The plant produces components to be used in automotive heating and cooling 0.22 systems. Manufacturer of vehicular radiator cores. Certain customers require that 0.81 these cores be painted. Manufacturer of vehicular radiator cores. Only a small portion of these 0.02 products require painting. Various welding -shearing-punching and painting of steel for the production of 0.87 bolted steel tanks (see comment sheet). 0.34 Manufacturing facility producing copper/brass and aluminum radiators. Crane Valve is a cast iron foundry who manufactures metal parts for valve 1.00 and agricultural equiptment. Manufacturer of friction materials for automotive brake disc pads and drum 0.00 brake segments. 0.87 Manufacturer of fluid meters and counting devices. 0 Manufacturing of K-series, LH/DLH/SIS series, steel joist and related parts. Manufacturer of many different size steel tanks-water tanks, air compressor 0.57 tanks, boiler vessels, etc. Operation of turbine generator, manufacturing facilities, painting and testing 0.04 operations. 0.94 Manufacturer of steel industrial shipping containers
Reported SIC 3612 3751 3471
MMPP-0823 MMPP-0826 MMPP-0829 MMPP-0839 MMPP-0842 MMPP-0872 MMPP-0899
Visteon Automotive Systems - Indianapolis Plant Indianapolis YKK AP America Inc. The Jordan Company Sonoco Products Company Ken-Koat of Tennessee, Inc. Plant 1 Century Tube Corporation M-TEK, Inc. Dublin Memphis Memphis Lewisburg Pine Bluff Manchester
IN GA TN TN TN AR TN
80,337.72 371,000.91 101,932.30 3,193,068.60 437,928.71 704,381.63 62,110.06
Synthetic minor 40.17 source 185.50 Major source 50.97 Major source 1,596.53 Major source 218.96 Major source 352.19 Major source 31.06 Major source
101,840.40 224,057.68 167,539.02 5,980,943.02 70,176.93 646,715.07 728.24
3714 3354 3354 3469 3479 3317 3714
MMPP-0904 MMPP-0908 MMPP-0909 MMPP-0913 MMPP-0920 MMPP-0960 MMPP-0962 MMPP-0963 MMPP-0973 MMPP-0976 MMPP-0983 MMPP-0986 MMPP-0999 MMPP-1005 MMPP-1021 MMPP-1022 MMPP-1024 MMPP-1032 MMPP-1042 MMPP-1052 MMPP-1053 MMPP-1059 MMPP-1061 MMPP-1064 MMPP-1068 MMPP-1082 MMPP-1092 MMPP-1097 MMPP-1107 MMPP-1131 MMPP-1133 MMPP-1145
Winnebago Industries Inc. Rea Magnet Wire Company, Inc. Rea Magnet Wire Company, Inc. Greif Bros. Corporation Grief Brothers Corporation Trailmobile Trailer, LLC Keymark Corporation Peerless Products Inc. Modine Manufacturing Company Modine Manufacturing Company- Knoxville TN Caterpillar, Inc. Valley Joist GE Industrial Systems California Steel Industries Modine Aftermarket Holdings, Inc. ACF Industries, Inc. ACF Industries, Inc. Marion Steel Co. Chicago Blower Corporation Delong's, Inc. Connersville Plant Modine Aftermarket Holdings, Inc. Modine Aftermarket Holdings, Inc. Columbian Steel Tank Company Modine Manufacturing Company Crane Valve Allied Signal Friction Materials DANIEL MEASUREMENT AND CONTROL, INC. Vulcraft-Utah, Division of Nucor Corporation Brunner Engineering & Mfg. GE S&S Energy Products Greif Bros. Corporation
Forest City Fort Wayne Lafayette La Porte Winfield Charleston Fonda Fort Scott Jefferson City Knoxville Aurora Fort Payne Owensboro Fontana Los Angeles Huntington Milton Marion Glendale Hgts. Jefferson City Connersville Medley Merced Kansas City Trenton Washington Cleveland HOUSTON Brigham Bedford Houston Youngstown
IA IN IN TX KS IL NY KS MO TN IL AL KY CA CA WV PA OH IL MO IN FL CA KS MO IA TN TX UT IN TX OH
231,234.49 576,161.00 6,717,781.00 66,080.10 96,135.73 18,596.40 402,894.18 284,532.19 44,301.94 0 63,274.96 1,275.30 14,808.36 1,554.08 0 150,608.82 82,454.57 235.31 0 7,654.12 41,566.41 72.51 459.30 304,040.04 12,820.00 33,949.76 50.71 31,438.00 0 48,591.74 929.15 66,233.06
115.62 288.08 3,358.89 33.04 48.07
Major source Major source Major source Major source Major source
1,515,404.65 219,943.00 3,234,150.00 139,175.83 165,635.03 502,333.57 590,717.83 211,266.00 204,712.24 47,500.00 543,998.62 794,119.99 169,535.94 9,421.29 48.91 865,961.40 727,946.03 79,430.47 4,762.30 196,074.45 188,161.72 89.91 21,756.24 349,326.56 37,510.00 34,053.97 29,977.14 36,110.00 1,515,413.40 85,197.71 21,270.11 70,466.28
3354 3357 3357 3412 3412 3715 3354 3442 3714 3443 3531 3441 3621 3316 3714 3743 3743 3312 3564 3441 3714 3714 3714 3443 3714 3321 3292 3824 3441 3443 3511 3412
9.30 Major source 201.45 Major source 142.27 Major source 22.15 Major source Minor or area 0 source 31.64 0.64 7.40 0.78 Major source Major source Major source Major source Minor or area 0 source 75.30 Major source 41.23 Major source 0.12 Major source 0 Unknown Minor or area 3.83 source 20.78 Major source Minor or area 0.036 source Minor or area 0.23 source 152.02 Major source Synthetic minor 6.41 source 16.97 Major source 0.025 Major source Minor or area 15.72 source 0 Unknown 24.30 Major source 0.46 Major source 33.12 Major source
Page 5 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Status Reported SIC 3441 3354 3354
FACID MMPP-1146 MMPP-1149 MMPP-1150
Facility_name Vulcraft, Division of Nucor Corporation The William L Bonnell Co., Inc. The William L Bonnell Company, Inc. Florence Newnan Carthage
City
State SC GA TN
Total HAP (lbs) 553.55 132,122.18 373,301.58
Total HAP (tons)
Total Solids (lbs) 2,110,919.28 212,401.05 573,418.77
lbs HAP/lbs solids 0.00 0.62 0.65
0.28 Major source 66.06 Major source 186.65 Major source
MMPP-1155 MMPP-1161 MMPP-1163 MMPP-1173 MMPP-1175 MMPP-1177 MMPP-1180 MMPP-1209
CAPITOL PRODUCTS CORPORATION SMI Joist Company SMI Joist Nevada Texas Finishing Company Mustang Manufacturing Company, Inc. Essex Group Inc.
KENTLAND Hope Fallon Carrollton Owatonna Vincennes
IN AR NV TX MN IN IN TX
200,338.80 5,327.19 2,134.62 491,309.11 77,987.70 4,552,000.00 25.97 98,759.40
100.17 Major source 2.66 Major source Minor or area 1.07 source 245.65 Unknown 38.99 Major source 2,276.00 Major source 0.013 Major source 49.38 Major source
527,157.87 1,009,186.00 157,409.47 10,791.15 61,445.93 1,202,680.00 255,852.46 1,064,133.72
0.38 0.01 0.01 45.53 1.27 3.78 0.00 0.09
General Motors Corporation, MFD Marion Plant Marion American Railcar Industries Goodrich
MMPP-1214 MMPP-1221 MMPP-1232 MMPP-1235 MMPP-1237
American Meter Company Trinity Industries Railcar Div. Plant#102 Aluminum Shapes L.L.C. Greif Bros. Corporation John W. Hancock, Jr., Inc.
Nebraska City Greenville Delair Baltimore Salem
NE PA NJ MD VA
52,463.92 119,179.46 348,116.19 16,954.64 6,035.53
26.23 Major source 59.59 Major source 174.06 Major source 8.48 Major source Synthetic minor 3.02 source
185,846.76 461,423.00 292,565.54 49,520.44 908,599.83
0.28 0.26
Facility_Description This facility manufacturers the k-series, LH/DLH series steel joist and joist girders, related products, and steel decking. an aluminum extrusion plant An Aluminum Extrusion Plant Capitol Products is an aluminum extrusion and finishing facility, with three extrusion presses, wet painting, anodizing, and cutting, drilling and machining operations. Soft alloy aluminum extrusions are produced for the residential construcion, recreati Fabricator of steel span joints for commercial and industrial buildings. Joists are engineered structural members used to support roof decking Fabricator of steel span joists for commercial and industrial buildings. Joists are engineered structural members used to support roof decking. Application of high performance coatings Mustang Manufactures Skid Steer loaders and related equipment. Magnet wire drawing and coating plant Fabrication (stamping and minor assembly) of metal automobile and truck parts. Railcar Coatings Facility American Meter Company owns and operates a manufacturing facility designed to manufacture residential meters and regulators for the natural gas industry. Make of freightcars for the rail industries
3354 3441 3441 3479 3531 3351 3465 3743
3743 3354 3412
1.19 Melting, casting, extruding, fabricating, painting, and anodizing aluminum. 0.34 Steel Drum manufacturing
MMPP-1241 MMPP-1247 MMPP-1252 MMPP-1265 MMPP-1266 MMPP-1272 MMPP-1273
Vulcraft, Division of Nucor Corporation Navistar International-Springfield Assembly Plant Alumax Extrusions, Inc. Quincy Joist Company Greif Bros. Corporation SMI Owen Steel Windsor Door - Little Rock Plant
Grapeland Springfield West Chicago Quincy Caldwell Columbia Little Rock
TX OH IL FL OH SC AR
80.52 849,913.44 1,749,686.98 0 19,183.73 17,651.63 6,297.88
0.040 Major source 424.96 Major source 874.84 Major source 0 Major source 9.59 Major source Minor or area 8.83 source 3.15 Unknown
1,434,920.53 2,362,668.54 3,311,216.02 368,892.89 86,436.16 37,813.21 12,136.32
0.01 Mfg. Open web steel joist and rack systems 3441 This facility manufactures the K-series and LH/DLH series steel joists and joist girders, steel deck, and related products. The manufacturing process 0.00 includes material preparation, welding and prime coating. 3441 0.36 Manufacturer of heavy and medium duty trucks 0.53 An aluminum extrusions operation with a vertical painting facility. Manufacturing of metal joists. Operations include fabrication (cutting, bending, 0 punching, welding, ect.) and surface coating. 0.22 Manufacturer of steel industrial shipping containers 0.47 Structural steel fabrication facility 0.52 Roll form and assemble overhead doors and components. This facility manufactures the K-series and LH/DLH series steel joists and joist girders. The manufacturing process includes material preparation, welding, 0.01 and prime coating. Manufacture insulated doors and door systems: extrusion tenoning, routing, 0.01 paintline, foaming, and machine operaitons. 0.45 Steel Drum manufacturing 0.02 Metal building systems sales, engineering and fabrication. 3711 3354 3441 3412 3441 3442
MMPP-1281 MMPP-1285 MMPP-1288 MMPP-1289 MMPP-1305 MMPP-1320
Vulercraft Therma-Tru Corp Greif Bros. Corporation Nucor Building Systems GEIS Broadway Motor Plant Northrop Grumman - ESSD BWI Site
St. Joe Van Buren Cullman Waterloo Fort Wayne Linthicum
IN AR AL IN IN MD
10,266.06 4,092.98 70,089.10 10,863.46 9,311.51 10,076.27
5.13 Major source 2.05 Major source 35.04 Major source Synthetic minor 5.43 source 4.66 Major source 5.04 Major source
774,545.51 378,705.04 155,086.96 435,743.95 15,932.46 5,924.20
3441 3442 3412 3448
0.58 Manufactures components of and assembles small AC & DC electric motors 3621 The BWI site consists of 8 buildings and 2 airplane hangers, located adjacent 1.70 to the BWI Airport in Linthicum, Maryland. 38122-47 Manufacturer of Recreational Vehicles, including motorized and towable units. 0.67 Also have frame painting, Wood coating, custom coating, and lamination. 3716 Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.25 including bending, welding, grinding, abrasive blasting and painting of steel Mark III Industries is a converter of luxury vans and trucks. We take completely stripped down cargo vans and turn them into passenger vehicles and we also take pick up trucks and sport utility vehicles and upgrade them 1.01 through the addition of extra inte 39,000 sq/ft Cinder Block & Steel Building, used for the Application of 3.73 Engineered Specification Coatings. Manufacture finished metal piece parts, including surface coating, for defense 1.53 products. Man. & Warehousing of bicycles & lawnmowers and Go-karts-draw, stamp, tubemills, forming, heat treat, alkaline, cleaning, painting, packaging. Manufactures combustion engines and parts Manufacturer of architectural aluminum walls and windows. Electric Motor Manufacture
MMPP-1329
Newmar Corporation
Nappanee
IN
243,543.11
121.77 Major source
365,800.47
MMPP-1338
Trinity Plant No. 101
Mt. Orab
OH
80,379.22
40.19 Major source
316,272.81
3743
MMPP-1341 MMPP-1352 MMPP-1353
Mark III Industries E/M Engineered Coating Solutions Alliant Techsystems--TCAAP Operations
Ocala New Britain New Brighton
FL CT MN
115,145.95 11,425.83 3,989.33
57.57 Major source Minor or area 5.71 source Synthetic minor 1.99 source
114,069.83 3,062.94 2,603.64
3713 3479 3489
MMPP-1359 MMPP-1366 MMPP-1369 MMPP-1378
Murray, Inc. Cummins Engine Co, Inc Kawneer Co., Inc. General Electric Industrial System
Lawrenceburg Charleston Springdale DeKalb
TN SC AR IL
197,832.76 959.58 325,665.54 3,158.55
98.92 0.48 162.83 1.58
Major source Unknown Major source Major source
142,097.94 14,064.16 125,850.90 26,915.40
1.39 0.07 2.59 0.12
3751 3714 3442 3621
Page 6 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-1383
Facility_name Coleman Company, Northeast Facility
City Wichita
State KS
Total HAP (lbs) 36,925.76
Reported Title V Total HAP (tons) Status 18.46 Major source
MMPP-1387
Coleman Powermate Inc.
Kearney
NE
395.96
0.20 Major source
MMPP-1395 MMPP-1396 MMPP-1397 MMPP-1398 MMPP-1399 MMPP-1405 MMPP-1411 MMPP-1424 MMPP-1426 MMPP-1434
New Columbia Joist LTV Steel Tubular Products Company - Counce Georgia Tubing Corporation LTV Steel Tubular Products Company Ferndale LTV Steel Tubular Products Company Youngstown Truth Hardware Paint Plant Coleman Company, Beacon Facility DENSO Manufacturing Tennessee, Inc. DENSO Manufacturing Tennessee, Inc. AMANA COMPANY, L.P.
New Columbia Counce Cedar Springs Ferndale Youngstown Owatonna Maize Maryville Maryville FAYETTEVILLE
PA TN GA MI OH MN KS TN TN TN
5,965.38 495.99 0 0 7,998.34 112,431.63 135.62 27,849.01 32,145.43 35,569.95
2.98 Major source 0.25 Major source 0 Major source 0 Major source 4.00 Major source 56.22 Major source 0.068 13.92 16.07 17.78 Major source Major source Major source Major source
Reported Total Solids (lbs) lbs HAP/lbs solids Facility_Description SIC 98,143.28 0.38 Manufacture Lanterns, stoves, heaters, coolers, jugs. 3634 Manufacturer of small portable electric generators by sheet metal and tubing fabrication, welding and powder coating; machining of components; electrical wiring, winding, assembly and coating; assembly; and packaging. Includes a 11,302.72 0.04 warranty facility where w 3621 The primary products of NCJ are steel joists and accessories for metal buildings. The production process includes assembly, welding, and coating of 905,497.05 0.01 the joists. 3441 34,810.38 202,083.24 249,539.42 41,315.03 208,029.02 186.47 10,826.34 4,273.76 239,713.98 0.01 Manufacturer of Steel Tubular Products. 0 Manufacturer of electrical conduit. 0 Manufacturer of electrical conduit and mechanical grade tubular products. Manufacturer of Steel Tubular Products for the oil, natural gas and 0.19 construction markets. Dedicated painting facility using the following coating: Powder; solvent based 0.54 wet; water borne wet. Propane bottling operation including a powder coat paint operation and a wet 0.73 paint touch-up process. 2.57 Manufacture Automotive Instrument Clusters 7.52 Manufacture Automotive Electrical Control Units (ECU's) 0.15 MANUFACTURING OF AIR CONDITIONING AND HEATING UNITS. Class 8 Heavy-duty trucks are assembled at this facility. Several different surface coating operations occur on metal (steel and aluminum) and plastic substances, sometimes in the same coating operation. The main coating 1.34 operations include the following 0.73 6.08 0.28 31.07 0.00 0.08 Manufacture air compressors. Manufacture Automobile Starters and Alternators. See Comments. (Construction equipment manufacturer.) Cosmetic Closure Manufacturing The operation cleans and coats steel pipe Heavy duty trucks are assembled from pre-manufactured parts in a 13-acre building consisting of administrative offices and the assembly area. Integrated iron & steel mill at the pipe mill. A decorative or protective coating may be applied per customer specifications. Not all pipe is coated, two coating lines are used. Manufacturing business-ground support equipment and accessories for aircraft. Two buildings used for manufacturing steel drums. One plant manufactures 55 gal drums by air assisted spray. It also roller coats drum shells-find ends for the small drum and drum ends for itself. Custom surface coating of metal and plastic consumer products. Products inculde automotive fixtures, toys, jewelry. Once coated parts are either air dried or dried in electric or LP gas fired ovens. Manufacturing operations, assembly operations, testing and painting of heavyduty truck engines and Transmissions. 3644 3644 3317 3317 3429 3499 3714 3829 3585
MMPP-1439 MMPP-1441 MMPP-1449 MMPP-1450 MMPP-1471 MMPP-1477 MMPP-1478
Freightliner Corporation (TMP) Coleman Powermate Compressors DENSO Manufacturing Tennessee, Inc. Case Corporation Romatic Manufacturing Company Custom Pipe Coating, Inc. Mack Trucks, Inc. Winnsboro Assembly Operations
Portland Springfield Maryville Wichita Southbury Houston Winnsboro
OR MN TN KS CT TX SC
813,169.03 26,990.20 30,744.73 77,175.41 201,209.96 26,363.60 48,938.55
406.58 Major source Minor or area 13.50 source 15.37 Major source 38.59 Major source 100.60 Major source 13.18 Unknown 24.47 Major source
606,643.28 37,095.96 5,056.73 279,869.37 6,476.27 5,658,575.00 631,583.24
3711 3563 3694 3531 3469 3479 3713
MMPP-1491 MMPP-1494
U.S. Steel - Fairfield Works
Fairfield
AL CT
64,835.50 2,326.38
Accessory Controls and Equipment Corporation Windsor
32.42 Major source Minor or area 1.16 source Synthetic minor 23.70 source
3,280.62 7,972.79
19.76 0.29
3312 3585
MMPP-1495
Berenfield Containers, Inc. Mason Plant
Mason
OH
47,409.02
212,725.46
0.22
3412
MMPP-1496 MMPP-1499
Standard Spray Co., Inc. Mack Trucks, Inc.
Smithfield Hagerstown
RI MD
29,295.42 6,613.66
14.65 Major source 3.31 Major source
21,912.47 337.02
1.34 19.62
3999 3714
MMPP-1508 MMPP-1522 MMPP-1525 MMPP-1535 MMPP-1538
Trinity Plant No. 102N Eugene Welding Company Wyman-Gordon Forgings, Inc. Modine Manufacturing Company Southern Post - Utah
Greenville Marysville Houston Lawrenceburg Brigham City
TX MI TX TN UT
51,139.52 26,816.40 24,637.53 421,322.01 7,135.38
25.57 Major source 13.41 Unknown 12.32 Major source 210.66 Major source Minor or area 3.57 source
198,142.08 81,900.00 25,491.58 85,868.00 114,166.05
Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.26 including bending, welding, grindling, abrasive blasting and painting of steel 0.33 Manufacturer of steel tubing and storage rack systems. Manufacturer of iron and steel forged and extruded parts used in aerospace, 0.97 aircraft, petrochemical, and construction. 4.91 Manufacturer of heat transfer equipment. 0.06 Steel fence post manufacturing and painting facility. Manufacturer of measuring tapes with the following operations: Injection Molding, Fabrication, Heat Treating, Electroplating, electrocoating, etching, 0.03 phosphating, printing, rollcoating, dip coat. 64,000 Sq. Ft. Man. Facility on 30 acres. We do painting, machining, 0.09 polishing and assembly Heavy-Duty Trucks are assembled at this facility. Several different surface coating operations occur on a multitude of substrates, primarily metal, 4.13 fiberglass and plastic. See comment page for additional description. Form sheet metal into vehicle body components utilizing folling, forming, 0 stamping, pressing, and use of adhesives. 0.30 Manufactures metal and plastic tool storage products.
3743 3411 3317 3714 3446
MMPP-1554 MMPP-1560
Lufkin/Cooper Tools Volvo Penta Marine Products, L.P.
Apex Lexington
NC TN
2,133.61 12,041.71
1.07 Major source 6.02 Major source
77,148.09 134,374.35
3999 3519
MMPP-1572 MMPP-1576 MMPP-1583
Mack Trucks, Inc. Ford Motor Co., Chicago Stamping Plant Waterloo Industries, Inc. (Pocahontas Division)
Macungie Chicago Hgts. Pocahontas
PA IL AR
1,255,152.30 0 142,642.15
627.58 Major source 0 Major source 71.32 Major source
304,118.54 511,344.51 473,882.75
3711 3465 3499
Page 7 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Status Reported SIC
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Total Solids (lbs)
lbs HAP/lbs solids
Facility_Description
MMPP-1587
Trinity Plant No.117
Vidor
TX
121,647.67
60.82 Major source
444,926.80
Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.27 including bending, welding, grinding, abrasive blastin and painting of steel. Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.21 including bending,welding, grinding, abrasive blasting and painting of steel Avionics equiptment manufacturing, circuit board mfg., engineering, labs, 0.13 administrative. 15.02 Manufacture and test avionics communication equipment (electronics).
3743
MMPP-1588 MMPP-1589 MMPP-1592
Trinity Plant No. 118 Rockwell Collins, Inc. Rockwell Collins - Manchester Operations Indian Head Division, Naval Surface Warfare Center
Beaumont Cedar Rapids Manchester
TX IA IA
101,318.85 12,177.67 31,961.47
50.66 Major source 6.09 Major source 15.98 Major source
485,256.34 93,771.93 2,127.94
3743 3669 3669
MMPP-1612
Indian Head
MD
239.29
0.12 Major source
7.76
This facility supports the NAVY (primarily), and other branches of the armed 30.85 services in the research and manufacture of energetic materials and ordnance 3764 Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.24 including bending, welding, grinding,abrasive blasting and painting of steel Railcar and railcar parts manufacturing facility. Metal fabrication operations 0.24 including bending, welding, grinding, abrasive blasting and painting of steel. Railcars and railcars manufacturing facility. Metal fabrications operations 0.58 inclusing bending, welding, grinding, abrasive blasting and painting of steel 0.23 Railcar manufacturing 0.93 An aluminum extrusions operation with 2 vertical painting facilities. An aluminum extrusions operation with one vertical and one horizontal 0.23 painting facilities. 3.73 Four Hundred thousand square foot facility that manufactures automotive wire Agricultural equipment manufacturer - balers, windrowers, mower conditioners 0.59 and forge harvesters The manufacturing and painting of utility bodies for trucks and stake bodies for 0.00 trucks. Facility produces fabricated and structural steel. The products vary in size and 0.00 can be up to several tons. Facility produces fabricated and structural steel. The products vary in size and 0.01 can be up to several tons. Facility produces fabricated steel. The products vary in size and can be up to 0.02 several tons. Facility manufactures air-cooled engines and engine components. Operations at the facility include painting, machining, die cast, stamping, assembly, 0.10 plating, and heat treating. Facility produces fabricated steel. The products vary in size and can be up to 0 several tons. Facility produces fabricated steel. The products vary in size and can be up to 0.00 several tons. Facility produces fabricated steel. The products vary in size and can be up to 0.00 several tons. Facility manufactures air-cooled engines and engine components. Operatons at the facility include painting, machining, die cast, stamping, assembly and 0.02 plating. manufactures air-cooled engines and engine components. Operations at the 0.15 facility include painting, machining, die cast, stamping, and assembly. 90 Acre site approximately 2 million sq. ft. under roof. Metal subassemblies 0 fabricating facility. Steel is formed into various sizes for utilization in autombiles. Some assembly 0 (welding and adhesives) takes place. 0.14 Warehouse - aftermarket automotive parts 0.01 metal stamping operations with some subassembly work 0 Producer of automotive gray and ductile iron castings. 0 Manufacture of automatic engines and steel fuel tanks. Two million square foot facility located within Rouge Complex. Manufacturing 0 of stamping and subassembly parts for various assembly plants. Manufacturer of automotive front and rear axles and steel and aluminum 0 driveshafts. Automotive stamping plant performing sub-assembly of some components 0.03 requiring sealants. Automotive stampings, automotive body sub assembly involving resistance 0 welding and application of sealers. 0.29 Plastic Parts
MMPP-1633
Trinity Plant No. 18
Oklahoma City
OK
96,579.95
48.29 Major source
408,378.52
3743
MMPP-1635
Trinity Plant No. 19
Longview
TX
170,620.05
85.31 Major source
703,626.03
3743
MMPP-1637 MMPP-1642 MMPP-1655 MMPP-1656 MMPP-1693 MMPP-1702 MMPP-1706 MMPP-1855 MMPP-1857 MMPP-1860
Trinity Plant No. 25 Trinity Plant No. 26 Alumax Extrusions, Inc. Alumax Extrusions, Inc. Essex Group, Inc. Hay and Forage Industries Reading Body Works, Inc. Canam Steel Corporation Canam Steel Corporation Canam Steel Corporation
Saginaw Fort Worth Yankton Plant City Orleans Hesston Reading Point of Rocks Jacksonville Columbus
TX TX SD FL IN KS PA MD FL OH
125,798.55 102,863.39 6,671,947.73 2,180,364.07 19,518.07 183,304.23 2,871.40 1,767.04 1,810.56 5,465.96
62.90 Major source 51.43 Major source 3,335.97 Major source 1,090.18 Major source 9.76 Major source 91.65 Major source 1.44 Major source 0.88 Major source 0.91 Major source 2.73 Unknown
215,400.96 440,758.89 7,199,469.66 9,384,237.29 5,237.31 311,596.93 640,733.55 531,986.04 273,088.68 255,487.41
3743 3743 3354 3354 3357 3523 3713 3441 3441 3441
MMPP-1881 MMPP-1900 MMPP-1901 MMPP-1903
Briggs & Stratton Burleigh Plant Canam Steel Corporation Canam Steel Corporation Canam Steel Corporation
Wauwatosa Sunnyside Lafayette Washington
WI WA IN MO
20,037.34 0 656.00 656.00
10.02 Major source 0 Unknown 0.33 Unknown 0.33 Unknown Synthetic minor 1.85 source Minor or area 7.90 source 0 Major source Minor or area 0 source 26.99 Major source Minor or area 1.58 source 0 Major source 0 Major source Minor or area 0 source 0 Major source Minor or area 0.22 source Minor or area 0 source 177.00 Major source
194,180.53 241,890.90 539,363.27 562,057.75
3519 3441 3441 3441
MMPP-1905
Briggs & Stratton Poplar Bluff Missouri Plant
Poplar Bluff
MO
3,709.13
156,857.40
3519
MMPP-1909 MMPP-2015 MMPP-2055 MMPP-2098 MMPP-2099 MMPP-2100 MMPP-2101
Briggs & Stratton Statesboro Georgia Plant GM MFD Grand Rapids DaimlerChrysler Sterling Stamping Ford Parts - Brownstown Distribution Center Ford Motor Co. - Buffalo Stamping Plant Ford Motor Co. - Cleaveland Casting Plant Ford Motor Co. Dearborn Engine Plant
Statesboro Grand Rapids Sterling Heights Romulus Buffalo Brookpark Dearborn
GA MI MI MI NY OH MI
15,792.00 0 0 53,979.55 3,155.05 0 0
101,900.80 82,605.00 1,401,767.00 389,060.50 347,002.50 39,397.39 1,138,330.06
3519 3465 3465 5013 3465 3321 3714
MMPP-2102 MMPP-2105 MMPP-2106 MMPP-2107 MMPP-2108
Ford Motor Co. Dearborn Stamping Plant Ford Sterling Plant Ford Motor Co. Walton Hills Stamping Plant Ford Motor Co. Woodhaven Stamping Plant Ford Motor Co. Milan Plastics Plant
Dearborn Sterling Heights Walton Hills Woodhaven Milan
MI MI OH MI MI
0 0 445.32 0 353,999.49
17,660.00 849,995.14 14,844.00 886,887.54 1,203,685.16
3465 3714 3465 3465 3714
Page 8 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-2109 MMPP-2110 MMPP-2112
Facility_name Ford Motor Co. Saline Plant Ford Motor Company-Visteon Automotive Systems-Sandusky Plastics Plant Daimler Chrysler Dayton Thermal Products
City Saline Sandusky Dayton
State MI OH OH
Total HAP (lbs) 49,012.86 10,032.40 501,000.02
Reported Title V Total HAP (tons) Status 24.51 Major source 5.02 Major source Synthetic minor 250.50 source Synthetic minor 4.49 source 0.44 Major source 0 Major source 9.89 Major source Synthetic minor 0 source Synthetic minor 0 source
MMPP-2113 MMPP-2114 MMPP-2116 MMPP-2117 MMPP-2120 MMPP-2121
DaimlerChrysler Detroit Axle DaimlerChrysler Huntsville Electronics Daimler Chrysler Kokomo Transmission Plant Daimler Chrysler Marysville Parts Depot Daimler Chrysler Toledo Machining Daimler Chrysler Twinsburg Stamping Plant
Detroit Huntsville Kokomo Marysville Perrysburg Twinsburg
MI AL IN MI OH OH
8,971.58 874.00 0 19,786.28 0 0
Total Solids (lbs) lbs HAP/lbs solids Facility_Description 347,179.86 0.14 Manufacturer and assembly of automotive component parts. Manufacturer of plastic automotive exterior lighting systems and interior air 431,820.00 0.02 intake systems Manufacture and assembly of radiators, evaporators, HVAC units, and fuel 297,309.89 1.69 cannisters. The primary activity at the Detroit Axle Plant is manufacturing of automotive axles. The facility is a supplier and producer of gears, brake systems, and 13,221.18 0.68 sway bars. 16,606.00 0.05 Automotive Electronics Assembly Manufacture and assemble automatic transmissions for light duty trucks and 5,700.00 0 automobiles. 202,019.50 0.10 Warehouse and Prime sheet metal for after market. 6,065.00 932,948.16
Reported SIC 3714 3714 3585
3714 3694 3714 3479
0 Manufacture Steering Column and Transmission Parts 3714 Stamp metal automotive parts, assemble doors and liftgate for Minivans, sport 0 utility vehicle and automobiles. 3465 An engine plant that manufactures four and six cylinder engines that are used 0 in various makes and models of DaimlerChrysler cars and minivans. 3714 0 Provides automotive stampings to automotive assembly plants 3465 Facility produces auto transmissions. Operations include metal cleaning, 0.04 surface preparation, phosphating, heat treating, machining and assembly. Manufactures manual transmissions, transaxles, transfer cases, differential 0.00 cases and gear sets. 0.07 Manufactures Class 5 to 8 medium to heavy duty trucks 0.36 Medium Duty Truck Assembly Home of the 89th Airlift Wing, Air Mobility Command, and host to units of the Air Force Reserve, Air National Guard, Naval Air Facility, and the Army Air Force Exchange System. The 89th Airlift Wing privides airlift, 0.45 communications, and logistical suppor NAS Jacksonville is located on the west bank of the St. Johns River in southwest Jacksonville, approximately 10 miles south of the downtown area. NAS is the land-owning host activity with control of 3,896 acres of real estate. 0.46 The station sustains over 1.11 Provide regional maintenance and repair for the U.S. Navy, Pacific Fleet. Military training facility with majority of activities focused on military training; 0.54 military equipment and vehicle maintenance; and support for facilities. 0.83 Full service communications / electronics manufacturing and repair facility. Manufacture military ammunition ranging in size from 5.56mm, 7.62mm, .50 1.22 Caliber, and also assemble 20mm. Military tracked armored vehicle, towed artillery overhaul and ammunition 13.07 storage. Manufacturer of miscellaneous parts and subassemblies for automotive and 2.24 light-duty truck applications. Manufacturer of miscellaneous parts and subassemblies for automotive and 0.06 light-duty truck applications. Facility manufactures drum brake assemblys and disc brake pads. Operations performed at the facility include powder coating, adhesive 0.04 application and hot eject integral molding. Facility manufactures brake components. Operations at the facility includes 0.00 surface coating, plating, cleaning, grit blasting, machining, and heat treating. Assembly and finishing of struts, shocks, fan clutches and energy absorbing 0.01 devices. 0.41 Assembly and finishing of automotive struts Bearings manufacturing includes machining, heat treating, grinding, and 0 assembly. 0 Machining & assembly of disc brakes (auto & truck). Assembly of automotive electronic devices including audio systems, engine 0.23 controls, airbag controls, and HVAC. 0.23 Manufacture of truck and automobile fuel tanks, fuel filters, and generators 0.01 Assembly and finishing of automotive parts. Plastic injection molding - Automotive / Truck interior parts(i.e.door panels, 0.03 instrument panels)
MMPP-2122 MMPP-2123
Daimler Chrysler Trenton Engine Daimler Chrysler Warren Stamping Plant
Trenton Warren
MI MI
0 0
0 Major source 0 Major source
3,123.25 3,186,884.00
MMPP-2124 MMPP-2125 MMPP-2127 MMPP-2128
New Venture Gear, Inc. - Muncie New Venture Gear - Syracuse Freightliner Coporation - Mt. Holly, NC GMTG Janesville Truck Assembly
Muncie East Syracuse Mt. Holly Janesville
IN NY NC WI
872.73 7.46 31,833.15 273,240.90
0.44 Major source Synthetic minor 0.0037 source 15.92 Major source 136.62 Major source
19,903.40 14,880.00 430,889.58 751,987.36
3714 3714 3711 3711
MMPP-2134
89th MAW Structural Maintenance
Andrews AFB
MD
108.16
0.054 Major source
238.90
9711
MMPP-2140 MMPP-2142
Naval Air Station Jacksonville Pearl Harbor Naval Shipyard
Jacksonville Pearl Harbor
FL HI
313.27 444.99
0.16 Major source 0.22 Major source
676.60 402.66
3728 3731
MMPP-2144 MMPP-2146 MMPP-2147 MMPP-2149 MMPP-2153 MMPP-2154
U.S. Army, Fort Riley Tobyhanna Army Depot Lake City Army Ammunition Plant Anniston Army Depot Delphi Chassis Systems, Home Avenue Operations
Fort Riley Tobyhanna Independence Anniston Dayton
KS PA MO AL OH OH
15,460.28 42,372.89 8,288.46 1,150,957.98 273,488.10 10,927.24
7.73 Major source 21.19 Major source 4.14 Major source 575.48 Major source 136.74 Major source Synthetic minor 5.46 source
28,624.27 51,294.41 6,802.51 88,079.55 122,194.56 193,776.17
3711 3679 3482 3795 3714 3714
Delphi Interior & Lighting Systems, Vadalia Ops Vandalia
MMPP-2155
Delphi Chassis Wisconsin Boulevard Plant
Dayton
OH
7,300.00
3.65 Major source
168,038.00
3714
MMPP-2156 MMPP-2157 MMPP-2158 MMPP-2159 MMPP-2160 MMPP-2162 MMPP-2163 MMPP-2165 MMPP-2168
Delphi Chassis Needmore Plant Delphi Automotive Systems, Kettering I Plant Delphi Automotive Systems, Kettering II Plant Delphi Chassis Systems Delphi Chassis Systems - Saginaw Operations Delphi Delco Electronics Systems - Bypass Plants Delphi Energy & Engine Management - Flint West GM Delphi Interior and Lighting Systems Delphi Automotive Systems
Dayton Kettering Kettering Sandusky Saginaw Kokomo Flint Columbus Adrian
OH OH OH OH MI IN MI OH MI
45.00 5,470.07 6,755.35 0 0 1,191.76 9,598.35 3,119.65 11,550.23
0.023 Major source 2.74 Major source Minor or area 3.38 source 0 Major source 0 Major source 0.60 Major source 4.80 Major source 1.56 Major source 5.78 Major source
331,924.68 496,265.34 16,389.00 7,162.81 119,628.20 5,269.68 41,570.51 210,751.60 453,246.49
3714 3714 3714 3714 3714 3694 3621 3429 3714
Page 9 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Status Reported SIC 3714 3448 3448 3448 3448 3448 3448
FACID MMPP-2171 MMPP-2176 MMPP-2177 MMPP-2178 MMPP-2179 MMPP-2181 MMPP-2182
Facility_name Powertrain Warren VP Buildings - Wisconsin Service Center VP Buildings - Ohio Service Center VP Buildings, Inc. VP Buildings, Inc. VP Buildings, Inc. Canam Steel Corporation Warren Evansville Van Wert St. Joseph Rainsville Turlock Easton
City
State MI WI OH MO AL CA MA
Total HAP (lbs) 0 0 0 26,041.78 92,003.06 2,245.29 360.80
Total HAP (tons)
Total Solids (lbs) 104,443.50 246,688.19 89,566.62 173,780.13 149,161.41 12,784.45 7,125.00
lbs HAP/lbs solids 0 0 0 0.15 0.62 0.18
0 Major source 0 Major source 0 13.02 46.00 1.12 Major source Major source Major source Major source Minor or area 0.18 source
Facility_Description Main manufacturing operations consist of wet metal machining and coating operations. Metal building fabrication facility. Manufacturing plant engaged in the design & fabrication of pre-engineered steel buildings. Prefabricated metal buildings. Metal Building Manufacturer Steel Building Manufacturing.
MMPP-2183 MMPP-2184 MMPP-2190 MMPP-2191 MMPP-2193 MMPP-2200 MMPP-2201 MMPP-2203 MMPP-2206 MMPP-2207 MMPP-2208 MMPP-2209 MMPP-2210 MMPP-2214 MMPP-2215 MMPP-2216 MMPP-2217 MMPP-2219 MMPP-2221 MMPP-2223 MMPP-2224 MMPP-2226 MMPP-2230 MMPP-2233 MMPP-2234 MMPP-2235 MMPP-2236 MMPP-2237 MMPP-2238 MMPP-2240 MMPP-2241 MMPP-2244 MMPP-2245 MMPP-2246 MMPP-2247 MMPP-2249 MMPP-2250
Amtrol, Inc. (KY) Great Dane Trailers Waterloo Industries, Inc. (Muskogee Division) Risdon Corporation Great Dane Trailers Therma-Tru Corporation HMF Division
Paducah Terre Haute Muskogee Danbury Wayne Wilmington
KY IN OK CT NE NC IN OH LA MS OH MI TX OK NC WI WI SC FL TX AZ TN MO IL IL MA NY IL IN CT PA NC TN MN NY IN IN
90.36 89,689.73 98,875.11 226,379.52 24,618.05 2,202.41 2,400.82 178.64 962,494.46 39,938.46 9,526.83 16,572.87 1,339.60 202,403.25 214.50 24,600.55 32,658.01 27,412.81 3,368.42 3,560.18 21,321.36 369.31 12,332.54 23,453.26 22,583.49 2,060.93 0.78 1,023.96 470,308.61 303.53 0 257,338.86 107,155.09 147,720.53 0 19,663.22 26,461.37
Minor or area 0.045 source 44.84 Major source 49.44 Major source 113.19 Major source 12.31 Major source 1.10 Unknown 1.20 Major source 0.089 Unknown 481.25 Major source Synthetic minor 19.97 source Synthetic minor 4.76 source 8.29 Major source 0.67 Unknown 101.20 Major source 0.11 Unknown 12.30 Major source Synthetic minor 16.33 source 13.71 Major source 1.68 Unknown Minor or area 1.78 source Synthetic minor 10.66 source Minor or area 0.18 source 6.17 Major source Minor or area 11.73 source Minor or area 11.29 source 1.03 Unknown 0.00039 Major source 0.51 Unknown 235.15 Major source Minor or area 0.15 source 0 Major source 128.67 Major source Synthetic minor 53.58 source 73.86 Major source 0 Major source 9.83 Major source 13.23 Major source Page 10 of 18
27,744.31 592,675.78 126,862.76 8,405.32 147,374.93 18,632.73 409,568.15 765.79 418,823.69 14,032.24 20,632.46 111,652.50 4,067.28 232,441.43 4,412.07 85,145.46 2,081.46 2,448.60 502.01 9,105.05 1,937,025.76 10,314.00 361,512.86 27,056.76 53,040.78 1,527.81 2.26 131.53 77,723.12 90.83 132,213.48 339,649.31 824.27 121,539.00 78,269.02 51,598.01 58,654.55
0.05 Facility produces structural steel. The products vary in size and shape. Manufactures non-refillable pressurized metal tanks. Process operations include pressing, punch, welding, brazing, cleaning, coating, finishing, and 0.00 packaging. 0.15 Fabrication and assembly of dry freight truck trailers and associated parts. 0.78 OEM sheet metal product manufacturer 26.93 Manufacturing Fabrication and assembly of truck trailers. Process includes molding, cutting, 0.17 presses, punching, surface coating (painting) and cleaning. 0.12 Hollow metal door manufacturing; metal door frame manufacturing. 0.01 Door Plant/ Mold Plant 0.23 Hollow metal door manufacturing. Fabricator and refurbisher of offshore oil and gas jackets, decks, and 2.30 platforms 2.85 Onshore facility - fabrication of structural steel and tubing. 0.46 Manufacturer of boiler cleaning equipment Manufactures and coats metal struts and associated metal parts for 0.15 commercial and industrial construction. 0.33 A 1.7 acre facility, employing 75 people that manufactures pipe nipples 0.87 Fabricator of structural steel. Machining, assembly, and testing of various water meters and fir protection 0.05 valves and devices. Manufacture fire extenguishers. Blend fire control dry chemicals and foam 0.29 agents. 15.69 Manufacture wheeled and stationary pressure tanks for fire control units 11.20 Manufacture automotive components Manufacture low and medium voltage switchgear with the following 6.71 processes, painting, plating, epoxy coating and plastisol dip. 0.39 Sales & service company that assembles & repair pressure relief valves. Manufacturer of welding metal, sprinkler, fence and mechanical tubular 0.01 products. 0.04 Manufacturer of threaded, stamped, and fabricated metal products. 0.03 Manufacture of single phase and 3 phase electrical distribution transformers 0.87 136,000 sq. ft. facility on 6.7 acres land in industrial zone in an urban area. 160,000 sq. ft. facility on 7 acres of land in an industrial zone in a rural 0.43 community. Machining and assembly of materials to make valves and testing of completed 1.35 valve. 0.34 Manufacturer of medical devices and drug products. 7.79 Load, assemble and package medium caliber amunition. Applies adhesive to metal inserts that rubber is bonded to offsite to produce 6.05 automotive components. 3.34 Contract Mfg. - Printed circuit assembly and heatsink fabrication. 0 Grinnell is a manufacturer of malliable and ductile iron castings. 0.76 Diesel engine assembly and cast iron machining. 130.00 1.22 0 0.38 0.45 Diesel Reconditioning facility - manufacture. Manufacturing of electrical power supply generator sets. One million square foot, diesel engine machining and assembly plant. 400,000 sq.ft. facility manufacturing high horsepower diesel engines. Cast iron machining and engine assembly plant. 11/7/2009
3443 3715 3499 3499 3715 3442 3089 3089 3441 3443 3499 3441 3498 3441 3569 3999 3999 3714 3613 3592 3317 3441 3612 3494 3494 3491 3842 2892 3479 3679 3322 3519 3519 3621 3519 3519 3519
Therma-Tru Corporation, Butler, Indiana Facility Butler Therma-Tru Corporation Bowling Green J. Ray McDermott, Inc. - Fabrication Yard Babcock & Wilcox Company Diamond Power International Unistrut Corporation J. B. Smith Manufacturing Company W & W Steel Company Grinnell Corporation Ansul, Inc. - Staton Street Ansul Fire Technology Center Robert Bosch Corporation ABB Power T&D Company Inc. A-G Safety, Sales and Service of Texas Allied Tube & Conduit Grinnell Corporation- Flow Control Division ABB Power T&D Company Henry Pratt Company Henry Pratt Company Crosby Valve, Inc. (Anderson Greenwood/Crosby) The Kendall Co. LP Alliant Techsystems LAP Facility Ken-Koat, Inc. Tyco Value Added Systems Amelia West Point Lancaster Wayne Houston Oklahoma City Cleveland Marinette Marinette North Charleston Sanford Baytown Phoenix Henderson Jefferson City Aurora Dixon Wrentham Oriskany Falls Wilmington Huntington Stafford Springs
Grinnell Flow Controls Division - Columbia Plant Columbia Consolidated Diesel Company Whitakers Cummins Diesel Recon Onan Corporation Cummins Engine Cummins Industrial Center Cummins Engine MidRange Engine Plant Memphis Fridley Lakewood Seymour Columbus
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-2251 MMPP-2252 MMPP-2253
Facility_name Cummins Engine Co. Inc. C.E.P. Nelson Division - Mineral Point Nelson Division - Wautoma
City Columbus Mineral Point Wautoma
State IN WI WI
Total HAP (lbs) 33,184.45 6,559.23 10,772.28
Reported Title V Total HAP (tons) Status 16.59 Major source Synthetic minor 3.28 source Synthetic minor 5.39 source
Total Solids (lbs) lbs HAP/lbs solids Facility_Description 85,149.76 0.39 Diesel engine manufacturer for the transportation industry. 29,726.94 52,972.19 0.22 Muffler manufacture. 0.20 Muffler manufacturer. Process #1 - Includes the manufacturing of military infrared decoy flares. Process #2 - Includes assembly operations for the flares. Processes include: 0.53 soldering, milling, extrusion, pelletazation, and surface coating. 0.20 Trailer manufacturing plant. 0.00 Manufacturer of cast iron gate valves and related piping products. 0.77 Manufacturer of stainless steel pipe products Range hoods, kitchen and bathroom ventilation fans, trash compactors, and 0.15 other accessories 0.16 Manufacturer of Truck Trailers 0.19 Manufacturer of Truck Trailers 55.42 Manufacturer of gear reducers 0.51 Manufacturer of mechanical gear speed reducers 0.22 Assemble Electric Motors. 0.60 Manufacturer of Drive Systems. 2.49 Produces automobile brake and fuel lines from steel tubing. 0.26 Paint Spray Booth for space operations support. 0.31 Automotive maintenance paint spray booth for support of space operations. 0.37 Paint spray booth for of space operations. John F. Kennedy Space Center (KSC) is the major NASA installation for launch operations and related program sin support of manned space 3.38 emissions. Fabrication of steel building structures such as I-beams, bridge trussels, and 1.41 other heavy steel parts of equipment Production facility of 5 buildings including fabrication, maintenance, painting 0.46 and office areas, and outside parking and storage areas. 0.30 PVS fabricates steel. Motor home manufacturers - mold based fiberglass products - see comments 3.14 sheet Steel fabrication shop that cuts, welds, bends, shears, punches, grinds, 0.40 blasts, and paints structural steel for industrial and commercial structures. 4.23 Rubber molding operations producing automotive parts 4.03 0.46 8.09 25.01 Rubber to metal suspension component manufacturer Tier One/Tier Two Automotive exhaust supplier Manufacturing plant for automotive ride control products Manufacturees of deep drawn metal stampings. Manufactures original equipment and aftermarket mufflers, tail pipes, 0 resonators for passenger & commercial vehicles
Reported SIC 3519 3499 3499
MMPP-2254 MMPP-2255 MMPP-2256 MMPP-2257 MMPP-2258 MMPP-2259 MMPP-2260 MMPP-2272 MMPP-2274 MMPP-2275 MMPP-2278 MMPP-2279 MMPP-2280 MMPP-2283 MMPP-2284
Kilgore Operations Great Dane Trailers, Inc. Mueller Company-Chattanooga Mueller Company - Cleveland Broan Manufacturing Pines Trailer a Division of Great Dane Limited Par Pines Trailer a Division of Great Dane Limited Par Rockwell Automation - Dodge Rockwell Automation - Belton Facility Rockwell Automation - Athens Rockwell Automation - Euclid Facility Hisan, Inc. Paint Spray Booth (Corrosion Control Facility) Paint Spray Booth (Hanger U, Bldg 49536) Paint Spray Booth (Bldg 1628) Garage Type
Toone Savannah Chattanooga Cleveland Hartford Kewanee Greenville Columbus Belton Athens Cleveland Findlay Cape Canaveral Cape Canaveral Cape Canaveral
TN GA TN TN WI IL MS IN SC GA OH OH FL FL FL
1,140.48 111,816.86 1,341.94 946.44 58,315.90 28,982.55 33,998.79 5,756.64 10,715.76 11,050.00 12,394.89 234,804.02 118.19 116.89 254.26
0.57 Major source 55.91 Unknown 0.67 Major source Synthetic minor 0.47 source 29.16 Major source 14.49 Major source Synthetic minor 17.00 source Minor or area 2.88 source 5.36 Major source Synthetic minor 5.53 source Minor or area 6.20 source 117.40 Major source 0.059 Major source 0.058 Major source 0.13 Major source
2,138.40 560,133.64 395,037.05 1,233.05 385,756.42 184,943.19 179,231.70 103.87 21,133.86 49,680.00 20,705.69 94,473.04 458.20 376.30 694.90
2899 3715 3321 3491 3634 3715 3715 3566 3566 3621 3566 3317 9711 9711 9711
MMPP-2285 MMPP-2288 MMPP-2289 MMPP-2291 MMPP-2292
JFK Space Center PDM Bridge High Steel Structures, Inc. Paxton and Vierling Steel Company National RV, Inc.
Cape Canaveral Eau Claire Lancaster Carter Lake Perris
FL WI PA IA CA
31,684.11 254,820.70 59,377.89 12,810.58 295,853.31
15.84 Major source 127.41 Major source 29.69 Major source 6.41 Unknown 147.93 Major source
9,384.62 181,320.97 127,883.31 43,081.06 94,081.00
9661 3441 3441 3441 3716
MMPP-2293 MMPP-2294 MMPP-2296 MMPP-2299 MMPP-2300 MMPP-2301 MMPP-2303 MMPP-2309 MMPP-2310 MMPP-2311 MMPP-2312 MMPP-2313 MMPP-2314 MMPP-2315 MMPP-2316 MMPP-2317
Cives Steel Company, Northern Division Tenneco Automotive - Milan The Pullman Company Tenneco Automotive - Marshall Monroe Automotive Equipment Company Accurate Forming Division Tenneco Automotive/Walker North American Transformer E/M Engineered Coating Solutions E/M Engineered Coating Solutions E/M Engineered Coating Solutions E/M Engineered Coating Solutions E/M Engineered Coating Solutions E/M Engineered Coating Solutions E/M Engineered Coating Solutions Premoor Entry Systems
Gouverneur Milan Angola Marshall Hartwell Hamburg Seward Milpitas New Brighton Roseville Fort Worth Sharon Hill Chatsworth North Hollywood Mountain View Richmond
NY OH IN MI GA NJ NE CA MN MI TX PA CA CA CA IN
7,450.91 92,466.63 38,958.62 19,775.25 495,806.49 118,029.56 0 231.66 24,768.79 103,920.97 10,181.70 6,997.98 93,276.04 43,351.55 3,534.15 337.22
3.73 Unknown 46.23 Major source Synthetic minor 19.48 source 9.89 Major source 247.90 Major source 59.01 Unknown 0 Major source Minor or area 0.12 source Minor or area 12.38 source Minor or area 51.96 source Minor or area 5.09 source Minor or area 3.50 source 46.64 Major source 21.68 Major source 1.77 Unknown 0.17 Major source
18,640.04 21,837.03 9,674.89 42,546.75 61,306.07 4,720.08 56,787.50 84,641.81 25,950.94 35,743.70 3,005.44 4,103.73 7,931.94 7,205.53 13,500.87 101,896.23
3441 3061 3069 3714 3714 3699 3714 3612 3479 3479 3479 3479
0.00 Power Transformer Manufacturer. 50,000 sq/ft Concrete & Steel Building used for the Application of Engineered 0.95 Specification Coatings. 3 Cinder Block & Steel Buildings totaling 28,000 sq/ft, used for the Application 2.91 of Engineered Specification Coatings. 3 Concrete & Steel Buildings totaling 42,800 sq/ft, used for the Application of 3.39 Engineered Specification Coatings. 30,000 sq/ft Cinder Block & Steel Building, used for the Application of 1.71 Engineered Specification Coatings. Application of barrier coatings and solid-film lubricants to aerospace and 11.76 commercial fasteners. Application of solid film lubricants, primers, sheilding, and miscellaneous 6.02 coatings to commercial/industrial parts. 0.26 Application of solid film lubricants and conformal coatings to industrial parts. Manufacture steel insulated doors by forming stel sheets, assembly, injecting 0.00 foam components and painting
3442
Page 11 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID MMPP-2318 MMPP-2319 MMPP-2321 MMPP-2322 MMPP-2323
Facility_name Crispaire Division of Airxcel, Inc. Crispaire Division of Airxcel, Inc. Berenfield Containers Berenfield Containers, LTD HighSteel Structures, Inc. Cordele Norcross Clarendon Masury
City
State GA GA PA OH PA
Total HAP (lbs) 5,484.06 636.94 67,654.37 11,533.52 17,764.25
Total HAP (tons)
Reported Title V Status Synthetic minor 2.74 source 0.32 Unknown
Total Solids (lbs) 3,432.67 569.72 218,053.05 76,074.73 41,153.77
lbs HAP/lbs solids
Facility_Description
Reported SIC 3585 3585 3412 3412 3441
Williamsport
33.83 Major source 5.77 Major source Synthetic minor 8.88 source
1.60 Manufacturer of HVAC Equipment 1.12 Manufacturer of HVAC Equipment 2 Buildings used for the manufacture of steel shipping containers, 0.31 approximately 60,000 sqft. 0.15 180000 sqft drum manufacturing facility using 4 spray lines. Production facility with fabrication paint, maintenance and office areas. 0.43 Outside parking and storage areas. MOTORHOME and travel trailer MANUFACTURING FACILITY INCLUDING 0.42 CHASSIS CONSTRUCTION, VEHICLE ASSEMBLY AND PAINT MOTORHOME MANUFACTURING FACILITY INCLUDING CHASSIS 0.22 CONSTRUCTION, VEHICLE ASSEMBLY AND PAINT 0.10 travel trailer production facility and fiberglass parts manufacturing 1.99 0.08 0.11 1.63 see comments Automobile and light duty truck surface coating assembly plant. Automobile and light duty truck surface coating assembly plant. Converting stock vans to conversion vans.
MMPP-2328 MMPP-2329 MMPP-2330 MMPP-2332 MMPP-2335 MMPP-2336 PPP103 PPP104A PPP104B PPP111A PPP111B PPP111C PPP111W PPP111X PPP113
Monaco Coach Corporation MONACO COACH CORPORATION McKenzie Towables Group The Vendo Company Daimler Chrysler Toledo Assembly Plant I New United Motor Manufacturing, Inc. Starcraft Automotive Group, Inc. Lacks Industries, Inc. - 52nd St. Paint West Lacks Industries, Inc. - 52nd St. Paint East MSX International Special Vehicles - Mt. Elliot
Elkhart COBURG Springfield Fresno Toledo Fremont Goshen Kentwood Kentwood Detroit
IN OR OR CA OH CA IN MI MI MI MI MI MI MI KS
38,638.24 10,431.81 716.04 2,114.90 171,462.85 19,585.03 83,713.39 292,765.96 282,700.10 30,680.71 1,372.06 3,966.03 365.76 2,610.67 11,195.91
19.32 Major source 5.22 Major source 0.36 Major source Minor or area 1.06 source 85.73 Major source 9.79 Major source 41.86 Major source 146.38 Major source 141.35 Major source Minor or area 15.34 source Minor or area 0.69 source Minor or area 1.98 source Minor or area 0.18 source Minor or area 1.31 source 5.60 Major source
91,666.65 47,326.23 7,364.05 1,064.00 2,165,883.36 183,309.39 51,293.12 398,229.59 55,304.91 2,426.79 7,465.10 2,639.96 53.59 3,115.44 11,313.32
3716 3716 3083 3581 3711 3711 3716 3089 3089 3714 3711 3711 3711 3711 3713
0.74 Coating of automotive plastic exterior trim parts, including mostly grilles etc. Coating of plastic automotive exterior trim parts mostly wheel covers, grilles, 5.11 etc. 12.64 Fabrication of specialty cars, show car maintenance, misc. piecework. 0.18 Prowler Painting 1.50 Prepping of vehicles; Painting of vehicles and misc. parts. 6.82 Automobile prototype, design, and modeling 0.84 Prototype fabrication of motor vehicles 0.99 We coat trucks and bus bodies. This facility molds, paints and assembles Cowl panels (leaf screens) then ships to Ford for assembly. They are molded out of 2 different plastics then 0.21 only painted black using a waterborne paint. This facility molds, paints and assembles various automobile trim parts (tail lamps, interior dome lamps, license plate housings and misc. trim parts), they 1.61 are then sent to customers for assembly on vehicles. This facility molds, paints and assembles interior and exterior door handles and arm rest control panels. They are then shipped to various customers for 0.25 assemble on vehicles. 0.10 Assembly and manufacturing - interior automobile components 0.05 Automotive components-Interior automotive plastic part manufacturing 0.07 Automotive components MFG-Interior Automotive Parts. We coat and assemble ash trays, glove boxes and other misc. interior trim 0.57 pieces for automotive assembly plants. This facility molds, paints and assembles exterior lighting components and 0.64 interior trim for automotive assembly plants. This facility molds, paints and assembles interior trim components for 0.17 automobile assembly plants. 0.95 Manufacture side view exterior automotive mirrors. 2.05 Manufacture side view exterior automotive mirrors. We mold and coat bumpers and other exterior plastic parts for automotive 2.32 assembly plants. Brighton Interior Systems produces interior door panels for vehicles by casting 0.82 & press operations. 1.70 See attached Form J for description. 0 We paint grilles, and other exterior parts for auto assembly plants.
MSX International Special Vehicles - Lynch Rd Detriot MSX International Special Vehicles - Purks MSX International - Mandoline MSX International Design Fab Center Eldorado National Auburn Hills Madison Heights Madison Heights Salina
PPP114A
ADAC Plastics Inc. - Saranac
Saranac
MI
4,010.67
2.01
19,050.69
PPP114B
ADAC Plastics Inc. - Grand Rapids
Grand Rapids
MI
21,186.39
10.59 Major source
13,164.71
PPP114C PPP115A PPP115B PPP115C PPP117A PPP117B PPP117C PPP118A PPP118B PPP118C PPP118E PPP119 PPP123
ADAC Plastics, Inc. - Muskegon Prince Corp. Lakewood MFG Prince Corp. - Maplewood Facility Prince Corp. - Southview Campus Lescoa - Middleville Plant Lescoa - Breton Road Plant Lescoa - Plant # 7 Magna International - Lakeland Lowell Engineering Magna International - Nascote Industries
Muskegon Holland Holland Holland Middleville Grand Rapids Kentwood Kentwood Alto Nashville
MI MI MI MI MI MI Mi MI MI IL MI OH IN
30,662.23 8,881.44 4,120.61 7,505.61 6,190.56 77,174.19 6,407.50 65,358.14 208,508.89 1,478,510.01 1,270.53 24,875.19 0
15.33 4.44 2.06 3.75 Synthetic minor 3.10 source Synthetic minor 38.59 source Synthetic minor 3.20 source 32.68 Major source 104.25 Major source 739.26 0.64 Unknown 12.44 Major source 0 Unknown
121,508.39 91,870.16 81,646.73 112,675.08 10,767.95 120,600.53 38,445.00 69,046.33 101,862.73 635,949.58 1,550.91 14,627.16 300.76
3714 3714 3714 3714
3714 3714 3714 3711 3714 326199
Magna International - Brighton Interior Systems Brighton Plastic Trim, Inc. Dayton H. A. Parts Products of Indiana Company Greencastle
PPP124 PPP125 PPP126A
LexaMar Corporation Neaton Auto Products Mfg., Inc. Leon Plastics, Inc.
Boyne City Eaton Grand Rapids
MI OH MI
52,988.95 37,906.58 44,362.31
26.49 Major source 18.95 Major source 22.18 Unknown
140,850.81 22,185.73 50,578.44
PPP129
I.I. Stanley Company, Inc
Battle Creek
MI
65,836.40
32.92 Major source
12,534.92
We mold and coat decorative exterior polycarbonate appliques and body side 0.38 moldings of TPO. We also mold and coat polycarbonate headlight lenses. Plastic injection molding facility for the automotive industry. Coat interior 1.71 plastic parts as well as steering wheels. 3079 We paint rigid plastic as well as soft padded fe\lexible vinyl automotive interior 0.88 trim. This facility uses injection and thermoset molding to make automotive lighting assemblies. This facility coats automotive plastic parts with solvent and water 5.25 based coatings.
Page 12 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Status Synthetic minor 3.24 source Minor or area 3.52 source Synthetic minor 6.69 source Reported SIC 3647 336399 336399 3089 3714 3086 3089 3089
FACID PPP130 PPP131A PPP131B PPP136 PPP137A PPP137B PPP137C PPP137D
Facility_name Cooper Automotive Co. Vaungarde, Inc. - Bradley Vaungarde, Inc. - Chestnut UT Automotive, Berne Facility United Technologies Automotive - Wauseon Plant #296 UT Automotive UT Automotive - Plant 261 United Technologies Automotive Boyertown Owosso Owosso Berne Wauseon Iowa City Bourbon Edinburgh
City
State PA MI MI IN OH IA IN IN
Total HAP (lbs) 6,478.08 7,032.47 13,382.66 59,086.63 13.50 113,198.46 183.58 8,926.40
Total HAP (tons)
Total Solids (lbs) 12,625.35 10,889.14 40,688.14 19,489.46 1,980.00 92,252.20 25.52 4,410.96
lbs HAP/lbs solids
Facility_Description
0.51 Manufacture glass (and plastic) sealed beam headlamps. 0.65 Reaction injection molding and painting for auto industry. Topcoating of plastic parts for automobile, agricultural and recreational 0.33 industries. We provide several types of coated plastic parts for various automotive 3.03 manufacturers. 0.01 We manufacture plastic and vinyl automotive interior components from arm 1.23 rest to instrument panels for the automotive assembly plants. 7.19 This facility coats interior components for automotive assembly plants. This facility paints/coats plastic parts for automobile and light/medium duty 2.02 trucks. The UTA facility in Dayton employs approximately 205 people. The plant typically operates six days per week, twenty-four hours per day. UTA 3.10 manufactures plastic injection and molded exterior automotive mirrors. Manufacturer of exterior automotive trim. Process operations include injection 2.40 molding, reaction injection & painting. 1.40 Manufacturer of interior automotive trim - molding & finishing of interior trim.
29.54 Major source 0.0068 Major source 56.60 Major source 0.092 Major source 4.46 Major source
PPP137F PPP138A PPP138B PPP138C PPP138D PPP138E PPP138F PPP138G PPP138H PPP138I
Untited Technologies Automotive, Inc. Textron Automotive Company - Americus Operations Textron Automotive Company - Athens Operations Textron Automotive Company - Columbia Operations Textron Automotive Company - Evart Operations Textron Automotive Company - Morristown Operations Textron Automotive Company - NH Operations Textron Automotive Company - Port Huron Operations Textron Automotive Company - Rantoul Operations - Plant 1 Textron Automotive Company Rantoul Operations - Plant 2
Dayton Americus Athens Columbia Evart Morristown Farmington Port Huron Rantoul Rantoul
TN GA TN MO MI IN NH MI IL IL
3,644.07 4,350,147.84 63,852.14 2,356.75 464,224.91 49,528.81 17,182.81 1,454.36 37,695.35 0
1.82 Major source 2,175.07 Major source 31.93 Major source 1.18 Major source 232.11 Major source 24.76 Major source 8.59 Major source Synthetic minor 0.73 source 18.85 Major source 0 Major source
1,174.28 1,813,693.42 45,707.39 31,673.75 926,642.33 46,935.79 41,201.73 204,346.06 213,987.22 11,801.79
3086 3714 3714
0.07 Manufacturer of automotive instrument panels & interior trim. 3714 Manufacturer of exterior automotive trim - injection molding / painting of plastic 0.50 automotive trim. 3714 1.06 Manufacturer of automotive interior & exterior trim. 0.42 Manufacturer of automotive interior trim & instrument panels. 0.01 Manufacturer & finisher of interior automotive door trim. Injection molding, painting and assembly of plastic automotive interior trim 0.18 such as door panels & instrument panels. Injection molding, painting & assembly of plastic interior automotive trim 0 components. Autoalliance is a automotive assembly facility which has a captive plastic paint and mold process. Plastic fascia/bumper covers are manufactured to support 1.05 assembly operations. The facility manufactures automobile interior plastic trim parts, such as 0.00 armrests and interior panels. The facility manufactures automobile interior plastic trim parts, such as 0.23 armrests and interior panels. 2.49 Injecting plastic molding of interior automotive plastic parts. The facility manufactures automobile interior plastic trim parts, such as 0.02 armrests and interior panels. 0 Coating of plastic parts for interior of automobiles. Injection molding of plastic parts primarily for automobiles and light duty trucks. Most parts are painted, chrome plated or both. Some other plastic 1.19 parts are produced for various uses. G.H.P is an injection molder and finisher of thermoplastic parts offering spray painting (water borne), assembly, pad printing, hot stamping and sonic 0.14 welding. Two types of plastic parts manufactured at the facility are robotically or handspray painted before use in either on-site or off-site assembly processes. Pad 0.33 painting/printing on some of the parts is also performed. 3714 3714 3714 3714 3714
PPP142 PPP144A PPP144B PPP144C PPP144D PPP145
Autoalliance International, Inc. Collins & Aikman Plastics, Inc - Homer Plant Collins & Aikman Plastics, Inc - Manchester Plant Collins & Aikman Plastics, Inc. - St. Joseph Collins & Aikman Plastics, Inc. - Williamston, Noble Rd Atlantic Automotive Components
Flatrock Homer Manchester St. Joseph Williamstown Benton Harbor
MI MI MI MI MI MI
283,345.82 64.58 15,686.28 43,753.28 24.17 0
141.67 Major source Synthetic minor 0.032 source Synthetic minor 7.84 source Minor or area 21.88 source Minor or area 0.012 source Minor or area 0 source
268,765.12 47,769.66 69,438.10 17,575.43 1,559.45 112,032.78
336111 3086 3714 3089 3086 3080
PPP147
Guardian Automotive Trim, Inc.
Evansville
IN
166,579.40
83.29 Major source Minor or area 6.75 source Synthetic minor 0.33 source Minor or area 0.12 source Synthetic minor 0.082 source
139,887.42
3089
PPP149
Grand Haven Plastics, Inc.
Grand Haven
MI
13,506.70
99,339.50
3089
PPP151 PPP209B PPP209C
GHSP - Hart Pitney Bowes - Milford Pitney Bowes - Newton
Hart Milford Newton
MI CT CT
656.91 247.51 163.29
1,970.14 1,320.07 147.74
3089
PPP211 PPP222 PPP230 PPP239 PPP248
Valeo Sylvania, L.L.C. Greenville Technology, Inc Stanley Electric US Co. Inc. Camrose Technologies L.L.C Hitemco
Seymor Greenville London Ada Not Reported
IN OH OH OK NY
59,333.27 130,187.16 36,208.78 578,337.62 0
29.67 Major source 65.09 Major source 18.10 Major source 289.17 Major source Minor or area 0 source
468,478.75 187,754.22 34,666.11 603,045.95 45,807.92
0.19 Spray painting of copier compounds for appearance. Spray painting of weighing scale platens and covers, for remanufactured 1.11 product. Manufacture automotive lighting components. Process includes injection molding, coating, aluminization, and assembly. All parts are molded from 0.13 plastic resins, metal is not used. 0.69 Production and coating of miscellaneous plastic auto parts. 3714 1.04 Manufacturer of automotive lighting. 3647 Camrose Technologies coat plastic fascia parts for General Motors. We also 0.96 coat door panels for GM. 336399 0 Not Reported 334515
Page 13 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls Reported Title V Total HAP (tons) Status 1.22 Unknown 0.34 Unknown 0.042 Unknown Synthetic minor 11.97 source Minor or area 19.62 source Reported SIC 33993
FACID PPP301 PPP305D PPP305E PPP306 PPP307A
Facility_name Volant Ski Corporation Hasbro, Inc. Hasbro, Inc. - Hasbro Games Regal Finishing, Inc. Hackney & Sons Inc.
City Cincinnati Beverly Coloma Washington
State CO OH MA MI NC
Total HAP (lbs) 2,437.62 673.34 83.90 23,930.29 39,247.42
Total Solids (lbs) lbs HAP/lbs solids Facility_Description 195,123.82 0.01 Manufacture of snow ski and snowboards 117.00 5.75 Coating of toy prototypes for research and development. 37.17 2.26 Marketing and R & D departments. 22,927.07 93,669.87 1.04 We coat a wide variety of plastic parts on a contract basis. We coat plastic slab which comprise approximately 10% of the total surfaces 0.42 covered. The slabs are used on roll-up doors. (The functions at this location are the same as at the Washington NC facility Reporting # PPP307A.) We coat plastic slab which comprise approximately 10% of the total surfaces covered. The slabs are used on roll-up doors. We manufacture variety of plastic parts and paint them. Application of paint to polystyrene shutters by spraying & cleaning of application equipment. Central Coating Company Inc. applies E.M.I./R.F.I. Coating and cosmetic coatings on plastic housings for the computer, medical and business machine industries. Central Coating Co. Inc. is a job shop. Molding of fiberglass reinforced plastic parts, a variety of which are primer coated. Molding of fiberglass reinforced plastic parts, a variety of which are primer coated. Molding of fiberglass reinforced plastic parts, a variety of which are primer coated. We are custom plastic-molders of various products.
2591 3713
PPP307D PPP310 PPP313
Hackney & Sons Inc. Aeroquip INOAC Co. Design House, Inc.
Independence Fremont Menmomnee Falls
KS OH WI
39,232.07 157,631.12 15,856.66
Minor or area 19.62 source 78.82 Major source 7.93 Unknown Synthetic minor 4.47 source 2.10 Major source 2.57 Major source 3.61 Major source 7.62 Unknown Synthetic minor 12.59 source Synthetic minor 5.38 source Synthetic minor 2.85 source Minor or area 1.09 source 43.57 Major source 9.20 Major source Minor or area 0.000000061 source
93,669.87 255,308.62 15,856.66
0.42 0.62 1.00
3713 3089 3089
PPP316 PPP321A PPP321B PPP321C PPP328 PPP333A PPP333B PPP333E PPP333F PPP333G PPP333H PPP339
Central Coating Company, Inc The Budd Company - Kendallville The Budd Company - North Baltimore The Budd Company - Carey Nero Plastics Inc. Summit Polymers, Inc. - Kalamazoo Summit Polymers, Inc. - Valley Plant Summit Polymers, Inc. - East Plant Summit Polymers, Inc. - Columbia Plant Summit Polymers, Inc. - Vicksburg Plant Summit Polymers, Inc. - Sterling Plant E-S Plastic Products ,Inc.
West Boylston Kendallville North Baltimore Carey Owosso Kalamazoo Kalamazoo Kalamazoo Columbia Vicksburg Mt Sterling Waterford
MA IN OH OH MI MI MI MI MO MI KY WI
8,949.04 4,198.55 5,137.08 7,226.21 15,237.63 25,183.75 10,757.19 5,708.78 2,189.03 87,149.71 18,400.98 0.00012
27,560.97 282,818.96 336,490.80 472,988.16 219,223.83 10,001.94 32,201.75 8,826.16 8,232.84 84,214.36 17,298.56 1.21
0.32 0.01 0.02 0.02 0.07
3089 3089 3089 3089 3714 3714 3714 3714 3714 3714 3089
2.52 Injection molding, painting for automotive parts. 0.33 Injection molding of plastic automotive parts. 0.65 Injection molding & painting of plastic automotive parts. 0.27 Injection molding & painting of plastic automotive parts. 1.03 Injection molding & painting of plastic automotive parts. 1.06 Injection molding & painting of plastic automotive parts. Custom plastic injection molder with pad printing and vacuum metallizing 0.00 secondary operations. Manufactures fiberglass reinforced Thermoset plastic molding compound and custom molded parts. Various parts for electronics, small appliance and other 0.68 markets are coated. Plastic injection molding of miscellaneous parts. Coating operation on one production part - a cover site tube. Occasional use of spray coatings to 5.09 illustrate customer color choices. 1.18 Paint a wide variety of plastic automotive parts Co coats a variety of plastic Parts (Thermoset FRP, Hand layup FRP) as sub0.30 assembly parts for other industries. Injection molding decorative wall covering. Nailite applies various acrylic 1.84 lacquers to coat polypropylene shingles. We Manufacture aftermarket heavy duty FRP truck hoods. We have three areas of coating 1) we apply a water reducible black paint to the inside of the hoods. 2) we apple a primer for touch-up work and 3) we apply an adhesive 0.15 to bond the inner structure Spartek Inc., molds decorates and assembles (P.O.P.) point of purchase 0.53 signs. We also do custom vacuum plating. This facility performs secondary assembly and finishing operations for plastic parts, most of which are molded by a company related injection molding plant 1.10 that is located next door to it. Facility injection molds thermosplastics into automotive and appliance parts, 3.88 which are then painted and/or plated. 0.57 We paint products for the automotive market. The Burpee Company's Barrington plant fabricates and coats metal parts. However, some plastic parts are glued together and used in the final metal 10.00 product. The Burpee Company's Cary plant produces miscellaneous plastic parts by injection molding. Some parts require gluing together to form the final 0 product. Electrocoating, powdercoating and wet painting of miscellaneous metal parts 0.05 and plastic parts. 0 Mold components for assembly of cosmetic pumps. Vacuum metalizing of 0.28 cosmetic closures (caps) for fragrance industry.
PPP340
Premix, Incorporated
North Kingsville
OH
10,240.87
5.12 Major source Minor or area 0.076 source 85.28 Major source 1.83 Major source 210.91 Major source
15,000.05
334516
PPP356 PPP361 PPP367 PPP374
Metro Plastics Technologies, Inc. TG (USA) Corporation Hadlock Plastics Nailite International
Noblesville Perryville Geneva Miami
IN MO OH FL
152.59 170,568.62 3,657.24 421,811.05
29.97 144,293.81 12,078.36 229,606.35
3089
3089 3089
PPP384 PPP387
Jones Performance Products Inc. Spartek, Inc.
W. Middlesex Sparta
PA WI
2,149.92 10,455.66
1.07 Major source 5.23 Major source
14,793.37 19,556.80
3089
PPP389C PPP393 PPP394
GI Plastek Limited Partnership, Dec-Rite Div. Plastene Supply Company Plasti - Paint Inc
Marysville Pottageville St Louis
OH MO MI
18,639.60 980,895.47 13,999.14
9.32 Unknown 490.45 Major source Synthetic minor 7.00 source Synthetic minor 0.091 source Minor or area 0 source 1.41 Major source 0 Synthetic minor 4.24 source
16,943.39 253,110.34 24,401.49
3089 3471 3089
PPP395A
Burpee Company - Barrington Plant
Barrington
IL
182.40
18.24
3089
PPP395B PPP407U PPP415 PPP418
Burpee Company - Cary Plant MetoKote Corporation - Plants #2,3,4,5,& 10 S R of Arkansas Risdon AMS
Cary Lima
IL OH
0 2,812.79 0 8,485.73
9.95 51,510.06 486,809.06 30,677.10
3089 395
Thomaston
CT
3089
Page 14 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Reported Title V Status
Total Solids (lbs)
lbs HAP/lbs solids
PPP420A
Polaris Industries, Inc. - Roseau
Roseau
MN
85,423.21
Synthetic minor 42.71 source Synthetic minor 17.34 source 7.16 33.64 Major source 11.05 Major source 1.09 Major source 13.60 Major source 1.06 Major source Minor or area 2.23 source
80,457.41
PPP420B PPP425A PPP427C PPP427D PPP427H PPP427L PPP427W PPP441
Polaris Industries, Inc. - Spirit Lake Contempoary Products - Plant 1 Thomasville Furniture Industries, Inc. - Plant C/M/W/SB
Spirit Lake Menomonee Falls Thomasville
IA WI NC NC NC NC NC IN
34,672.36 14,324.13 67,274.19 22,097.66 2,174.07 27,191.72 2,114.21 4,452.37
44,315.26 22,994.67 28,825.36 14,036.10 7,192.17 18,102.30 906.09 39,871.72
Thomasville Furniture Industries, Inc. - Plant D Thomasville Thomasville Furniture Industries,Inc. Plant H Thomas ville Furniture Industries, Inc - Lenoir Plant Thomasville Furniture Industries, Inc. - West Jefferson Plant DeKalb Molded Plastics Company Winston-Salem Lenior West Jefferson Butler
Facility_Description Polaris Industries, Inc. (Polaris), Roseau manufactures snowmobiles and allterrain vehicles. The manufacturing process at Polaris consists of welding, 1.06 spray painting, assembly and engine testing. Polaris Industries, Inc. designs, engineers, manufactures and markets snowmobiles, all-terrain vehicles, personal watercraft and motor cycles for 0.78 recreational and utility use. 0.62 We manufacture wood furniture, which may contain plastic parts such as 2.33 decorative moldings, feet, etc.. We manufacture wood furniture, which may contain plastic parts such as 1.57 decorative moldings, feet, etc.. We manufacture wood furniture, which may contain plastic parts such as 0.30 decorative moldings, feet, etc.. We manufacture wood furniture, which may contain plastic parts such as 1.50 decorative moldings, feet, etc.. We manufacture wood furniture, which may contain plastic parts such as 2.33 decorative moldings, feet, etc.. 0.11 Structural Plastic Molding and Finishing This facility manufactures composite lineals of fiberglass - reinforced plastic using the pultrusion process. Some lineals ( parts) may be coated during the 5.80 manufacturing process. This facility coats a wide variety of plastic parts on a contract basis. Most of 0.38 the business lies in interior and exterior automotive components.
Reported SIC
2421 2511 2421 2421 2421 3089
PPP443 PPP447B PPP447E PPP449 PPP452
Carsonite International - Varnville Plant Worthington Custom Plastics, Inc. - Mason Worthington Custom Plastics, Inc - Upper Sandusky Menasha Corporation - Montec Plastics Danmar Products, Inc.
Varnville Mason Upper Sandusky Monson Ann Arbor
SC OH OH MA MI
16,830.80 98,080.14 20,103.05 2,479.49 22,968.43
8.42 Major source 49.04 Major source 10.05 Major source Minor or area 1.24 source 11.48 Unknown Synthetic minor 0.013 source Minor or area 6.43 source 0.027 Unknown 14.30 Major source 10.86 Major source Minor or area 0.22 source
2,902.50 259,070.28 81,535.12 2,625.50 5,049.88
3089 3089 3089 3089 3842
PPP453
K C Industries, Inc.
Holland
MI
26.07
644.49
PPP459B PPP460 PPP464 PPP469A PPP469B
Spensor Industries, Inc. St. Croix of Park Falls, LTD (St. Croix Fishing Rods) ETM Enterprises , Incorporated Green Tokai Company LTD. - Brookville Green Tokai Company LTD. - Maysville
Dale Park Falls Grand Ledge Brookville Maysville
IN WI MI OH KY
12,865.60 53.35 28,596.18 21,720.59 438.10
16,720.00 1,264.25 133,094.41 3,334.11 3.03
PPP476D
Eastman Kodak Company - Kodak Park Site
Rochester
NY
815.63
0.41 Major source
92.00
PPP477 PPP479 PPP481 PPP487 PPP488A PPP498
LaCrosse Footwear, Inc. Midwest Plastic Engineering, Inc. Sun Process Converting Inc. Artic Cat Inc. - Molding & Paint - Madison Mack Molding Company - Inman Bedford Reinforced Plastics, Inc.
La Crosse Sturgis Mt. Prospect Madison Inman Bedford
WI MI IL SD SC PA
2,576.85 29.65 275,992.55 34,220.14 35,016.24 1,305.60
1.29 Major source 0.015 Unknown Synthetic minor 138.00 source 17.11 Major source Synthetic minor 17.51 source 0.65 Major source
6,209.13 460.95 124,689.83 241,485.98 55,129.52 1,958.40
0.25 We coat a variety of plastic parts on a contract basis Producer of custom injection molded plastic parts for a variety of industrial 0.94 customers. We coat a foam product for the handicapped population, such as wheelchair 4.55 cushions, helmets and floatation devices for swim therapy. KC Industries is a job shop that finishes wood, metal and plastic substrates. We perform powder coat and wet coat application. We have both batch and 0.04 overhead operations. Custom fabrications/molding of thermo formed plastic for appliance housings, housings for exercise equipment, housings for projector TV's, refrigeration 0.77 housings on trucks, etc. Painting fishing blanks by means of a squeegee process. This is all done 0.04 manually! No control devices are used! 0.21 We coat a variety of plastic parts used for truck cabs. Manufacture automobile moldings by plastic extrusion, injection molding and 6.51 finishing processes Manufacture automobile moldings by plastic extrusion, injection molding and 144.70 finishing processes Manufacturer of photographic materials including film, paper base, sensitizing products, processing chemicals, and miscellaneous manufacturing and 8.87 support operations. LaCrosse Footwear manufactures a complete line of rubber and plastic footwear. Plastic footwear production is slush molded. An adhesive coating is used on the inside of some plastic footwear. Some of the plastic footwear is 0.42 also sprayed with an external f 0.06 Spray painting of plastic parts. 2.21 Coating operations for the purpose of manufacturing labels and signs. 0.14 Liquid resin molded parts are painted here. We mold, assemble, and paint a wide variety of plastic parts on a contract 0.64 basis. Coat specific plastic shapes with Grit (non-slip) and paint and also end cut 0.67 sealers. Plastic pellets are fed into molding machines where they are heated and molded into desired shapes. Some of the parts are washed in a citric acid based cleaner and spray painted and dried. After inspection, painted parts 3.86 are boxed and shipped to custome Co. coats a small amount of extruded/molded (polyurethane ) plastic sub 0.22 assembly decorative window parts. 2.11 We coat a variety of small plastic parts on a contract basis. We paint (coat) a wide variety of miscellaneous plastic parts for building 0.61 products industry. 0.85 Coating and painting a variety of molded plastic parts on a contract basis.
2511
3500 SIC 3713 3429 3429
3861
3021 3089 2679 3799 3089 3089
PPP501 PPP505 PPP507 PPP508 PPP511
Mayco Plastics, Inc. C W Ohio Inc Thierica, Inc.
Sterling Heights Conneaut Grand Rapids
MI OH MI SC MI
127,062.91 268.52 62,909.88 251,983.28 14,076.04
63.53 Major source 0.13 Major source 31.45 Major source 125.99 Major source 7.04
32,898.29 1,220.97 29,822.95 411,187.07 16,571.53
3089 3089 3749 3089 CBI
Alcoa Building Products - Gafferey Plant Gaffney GAC Plastics, LLC (formerly Glass Alternatives Corp.) Petaskey
Page 15 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Reported Title V Status
Total Solids (lbs)
lbs HAP/lbs solids
Facility_Description
Reported SIC
PPP514 PPP524 PPP528A PPP528B PPP528C PPP528D PPP528E PPP528F PPP528G PPP528H PPP528I PPP528J PPP528K PPP528L PPP528M PPP528N PPP528O PPP528P PPP528Q PPP528R PPP528S PPP528T PPP528U PPP528V PPP528W PPP528X PPP528Y PPP529
Mastermold, LLC London Industries, Inc. Walman Optical - Baltimore Walman Optical - Bemidji Walman Optical - Billings Walman Optical - Denver Ultra Coatings Walman Optical - Duluth Walman Optical - Evansville Walman Optical - Fargo Walman Optical - Fort Wayne Walman Optical - Great Falls Walman Optical - Green Bay Walman Optical - Kent Walman Optical - Las Vegas Walman Optical - Minot Walman Optical - Missoula Walman Optical - Montgomery Walman Optical - Norfolk Walman Optical - Omaha Walman Optical - Rock Island Walman Optical - Sioux Falls Walman Optical - Springfield Walman Optical - York Acurex Walman Optical - Duluth Walman Optical - Minneapolis Zehrco Plastics, Inc. - Plant 2
Johnson Creek London Baltimore Bemidji Billings Denver Brooklyn Center Duluth Evansville Fargo Fort Wayne Great Falls Green Bay Kent Las Vegas Minot Missoula Montgomery Norfolk Omaha Rock Island Sioux Falls Springfield York Brooklyn Center Duluth Minneapolis Ashtabula
WI OH MD MN MT CO MN MN IN ND IN MT WI WA NV ND MT AL VA NE IL SD IL PA MN GA MN OH
30,319.46 11,090.45 108.96 3.30 131.77 115.95 9,058.24 83.64 5,531.99 84.96 81.63 5,497.31 77.71 92.21 80.35 5,556.21 104.08 81.01 166.71 85.62 3.30 81.01 93.53 56.95 5,441.28 13.05 117.11 3,156.56
Synthetic minor 15.16 source Synthetic minor 5.55 source 0.054 Unknown 0.0016 Unknown 0.066 Unknown 0.058 Unknown 4.53 Unknown 0.042 Unknown 2.77 Unknown 0.042 Unknown 0.041 Unknown 2.75 Unknown 0.039 Unknown 0.046 Unknown 0.040 Unknown 2.78 Unknown 0.052 Unknown 0.041 Unknown 0.083 Unknown 0.043 Unknown 0.0016 Unknown 0.041 Unknown 0.047 Unknown 0.028 Unknown 2.72 Unknown 0.0065 Unknown 0.059 Unknown 1.58 Major source
140,371.38 8,449.67 94.11 4.92 129.49 105.85 3,024.30 57.59 3,105.12 59.56 43.80 3,070.96 48.73 70.40 52.67 3,095.22 88.13 53.65 181.69 60.55 4.92 53.65 72.37 72.35 3,046.71 16.50 89.70 11,748.40
PPP530 PPP533
MascoTech Coatings, Inc Styrotech Incorporated
China Township Brooklyn Park
MI MN
174,080.05 171.00
87.04 Major source 0.085 Major source
68,613.47 53,100.00
PPP540 PPP548 PPP551P
Moonlight Industries Inc. Continental Plastics Company Donaldson Company, Inc. - Oelwein
Comstock Part Fraser Oelwein
MI MI IA
13,821.73 10,064.65 10,096.11
6.91 Unknown Synthetic minor 5.03 source 5.05 Major source
27,734.96 20,987.67 4,138.09
PPP554 PPP559A PPP559B
Attwood Corporation Deco Plate Mfg Dott Manufacturing
Lowell Lapeer Deckville
MI MI MI
12.42 705,021.99 58,002.15
0.0062 352.51 Unknown Minor or area 29.00 source
34.58 2,992,951.41 23,625.79
PPP566
Everbrite, Inc.
Pardeeville
WI
3,886.03
1.94 Major source
9,507.93
PPP567 PPP568
Plastic Plate, Inc. - Plant 3 Cambridge Industries, Inc. - Lapeer
Cascade Twp. Lapeer
MI MI
269,944.76 26,006.14
134.97 Major source 13.00 Major source
95,791.17 78,831.08
PPP568J PPP570 PPP571 PPP574
Cambridge Industries, Inc. - Jackson Style-Mark, Inc.
Jackson Archbold
OH OH WI WI
5,391.26 68,829.85 4,407.93 22,871.39
Advanced Fiber Products, Inc. LaCrosse Phillips Plastics Corporation - Custom Plastics Unit Phillips
2.70 Major source 34.41 Major source Minor or area 2.20 source 11.44 Major source
214,483.84 97,533.14 4,078.32 2,362.10
We coat a variety of plastic parts on a contract basis. Majority is prime coat 0.22 only. Top coat used are of very low gloss, satin finish, higher solids material. We coat a variety of plastic parts on a contract basis for the automotive 1.31 industry. 1.16 Optical lab preparing prescription lenses some of which are coated. 0.67 Optical lab preparing prescription lenses some of which are coated. 1.02 Optical lab preparing prescription lenses some of which are coated. 1.10 Optical lab preparing prescription lenses some of which are coated. 3.00 Plastic Parts on contract basis. 1.45 Optical lab preparing prescription lenses some of which are coated. 1.78 Optical lab preparing spectacle lenses some of which are coated. 1.43 Optical lab preparing prescription lenses some of which are coated. 1.86 Optical lab preparing prescription lenses some of which are coated. 1.79 Optical lab preparing prescription lenses some of which are coated. 1.59 Optical lab preparing prescription lenses some of which are coated. 1.31 Optical lab preparing prescription lenses some of which are coated. 1.53 Optical lab preparing prescription lenses some of which are coated. 1.80 Optical lab preparing prescription lenses some of which are coated. 1.18 Optical lab preparing prescription lenses some of which are coated. 1.51 Optical lab preparing prescription lenses some of which are coated. 0.92 Optical lab preparing prescription lenses some of which are coated. 1.41 Optical lab preparing prescription lenses some of which are coated. 0.67 Optical lab processing spectacle lenses some of which are coated. 1.51 Optical lab preparing prescription lenses some of which are coated. 1.29 Optical lab preparing prescription lenses some of which are coated. 0.79 Optical lab preparing prescription lenses some of which are coated. 1.79 Optical lab preparing prescription lenses some of which are coated. 0.79 Optical lab preparing prescription lenses some of which are coated. 1.31 Optical lab processing spectacle lenses some of which are coated. Co. coats a variety (>100) plastic parts (Thermoset FRP) as sub assembly 0.27 parts for other industries. Vacuum metallizing for the automotive lighting industry, with metallizing base & topcoat where required. Also, hardcoat lenses for automotive lighting. 2.54 Some black & argent (silver) required on some components. 0.00 6 HVLP spray guns and paint booths spraying solvent reduced materials in an industrial setting. We coat a very large variety of plastic parts on a "job-shop" 0.50 and contractual basis. The facility uses three coating lines to coat injection molded plastic interior 0.48 automobile parts. This plant manufactures engine air filtration and accessories. Parts are 2.44 mostly metal. Plastic represents a small part of the total. Plastic injection molding of marine hardware and office furniture components. Surface coating is limited to one stamp pad printer to apply decals to marine pumps; one part with a hot stamped decal; and occasional adhesives in the 0.36 assembly of marine parts. 0.24 Injection molding, chrome plating, mask painting and small assembly Injection molding, hot stamping, painting, vacuum metalizing of plastic trim 2.46 components for the auto industries. Manufacturer of large advertising signs for commercial applications, menuboards and scoreboards. The manufacturing processes includes metal fabrication, metal cleaning, metal painting, plastic forming, plastic painting and 0.41 silk-screening. Coating of plastic parts, including: a) Business machine parts (computer enclosures, cellular phones); b) Exterior automotive trim parts (grilles, 2.82 headlight bezels, etc.). This facility does injection molding, painting, and assembly of automotive 0.33 interior trim parts. Manufacture plastic parts for the automotive, truck and farm industries. Processes include application of adhesives during assembly operations and 0.03 prime/topcoat paint application. 0.71 Manufacture polyurethane parts. 1.08 Manufacture of structural fiberglass - Pultrusion process 9.68 The facility supports the navy(primarily), and other branches of the armed services, in the research and manufacture of energetic materials and 33.59 ordnance.
3089 3089 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3082 3089
3089
3089 3523
3089
3089
3883
3089 3714
3089
3651
PPP578
Naval Surface Warfare Center
Indian Head
MD
71.09
0.036 Major source
2.12
Page 16 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Reported Title V Status
Total Solids (lbs)
lbs HAP/lbs solids
PPP579 PPP583 PPP586
Resilite Sports Products, Inc. Plastech Chance Operations, Inc.
Sunbury
PA
846,375.97 0 21,808.17
423.19 Major source 0 10.90 Major source
914,776.44 55,367.55 33,517.30
Wichita
KS
PPP592 PPP594
Mermac Group, Inc. Consolidated Coating Company
Sullivan Bellingham
MO MA
71,006.09 6,167.30
35.50 Major source Minor or area 3.08 source
52,086.57 120,262.43
PPP595 PPP597 PPP615
Krueger International Inc. - Manitowoc C & D Aerospace Inc. The Colonel's Inc.
Manitowoc Ontario Milan
WI CA MI
0 4,539.89 20,385.21
Synthetic minor 0 source Synthetic minor 2.27 source 10.19 Major source
8,402.00 2,000.53 4,101.75
Reported Facility_Description SIC RESILITE manufactures wrestling mats. The manufacturing process for the wrestling mats involves several steps including sizing, coating and curing. First, the foam (PVC/Nitrile rubber) coring is pieced together with an adhesive 0.93 to obtain the proper mat si 3949 0 Manufacture of amusement rides. We coat plastic on our scenery, and 0.65 fiberglass. 3499 Coat a portion of polyurethane shoe soles molded at this facility. Also use inmold coating technology to coat miscellaneous polyurethane covered industrial products. 23 additional employees work in the Industrial Products 1.36 Department. 3089 Application of coatings to a wide variety of Plastic and metal Parts on a 0.05 contract basis 3571 KI Manitowoc manufactures office partitions. The partitions (referred to as systems walls or panels) are made of metal cores with metal and/or plastic components and trim and are typically covered with upholstery or vinyl. They 0 also manufacture desk compo 2522 2.27 Manufacturer of aircraft interiors. 4.97 Coat plastic bumper fascia for application as replacement collision parts. Facility is a tier I supplier to the automotive industry. Thermoplastics are injection molded and the parts are then painted. Some parts receive multiple 3.02 coatings(basecoat and clearcoat). Primary product manufactured at this location is pultruded fiberglass reinforced plastics. Some pultruded shapes are fabricated into various 0.95 structures and components. Some of these are coated. 0.21 See Form J 0 Dip coating and molding of plastisol. 0 Plastic molding (misc. plastic parts including automotive, furniture, appliance, 0.26 etc.), finishing and assembly. No final product - all for other manufacturers. Decorative spray coating of plastic parts used for the packaging of cosmetic 0.08 products, I.e. lipstick. Decorative spray coating of plastic parts used for the packaging of cosmetic 0.01 products, I.e. lipstick. We job shop a wide variety of plastic parts; the majority of which are office 0.20 equipment skins, on a quote/purchase order basis. Job shop painting chromate conversion, iron phosphate, powder painting, 0.65 liquid painting, masking, silk-screening, pad printing, paint stripping. Job shop painting, chromate conversion, iron phosphate, powder painting, 0.39 liquid painting, paint stripping, electro-deposition (E-coat). OpKor Inc. designs, molds, coats and assembles precision polymer optics. The company coats a number of polymer lenses and mirrors with reflective, 0 antireflective and scratch resistant coatings. We paint a variety of plastic parts for the automotive industry, and some office machine components. Also, some assembly and sequential pack of 0.10 automotive material. Unk 7532
PPP618
SR Finishing
Portageville
MO
340,562.12
170.28 Major source
112,797.79
3089
PPP620A PPP620B PPP632 PPP634
Strongwell Corporation - Bristol Division Strongwell Corporation - Chatfield Division Tex-Sol Plastics Conformance Coatings & Prototype Inc. JSJ Plastics, Inc. (formerly Michigan Plastics Products Company) Rexam Cosmetic Packaging, Inc. Rexam Cosmetic Packaging, Inc. Maracle Industrial Finishing Co., Inc. Applied Coating Technology, Inc. Applied Coating Technology Inc.
Bristol Chatfield San Antonio
VA MN TX
381.61 10,102.30 0 0
0.19 Major source 5.05 Major source Synthetic minor 0 source 0 Minor or area 2.60 source Minor or area 0.62 source Minor or area 0.089 source 0.75 Unknown 0.61 Unknown 0.26 Unknown
400.00 48,056.07 5,880.00 18,473.48
3089 3089 3479
PPP636 PPP637A PPP637B PPP642 PPP645A PPP645B
Grand Haven Torrington Torrington Webster Mendota Heights Minneapolis
MI CT CT NY MN MN
5,206.70 1,241.80 179.00 1,499.85 1,228.36 514.48
19,855.54 15,594.56 13,961.89 7,647.47 1,884.79 1,332.23
3261 3089 3089
3575 3679
PPP660
Opkor Inc
Rochester
NY
0
0 Unknown
457.94
PPP667 PPP671A
Vassar Industries Spectrum Cubic - McConnell
Vassar Grand Rapids
MI MI
6,140.34 5,065.59
3.07 Major source Synthetic minor 2.53 source
58,848.70 4,893.96
3714 3714
PPP671B PPP680 PPP680A PPP684 PPP686 PPP686A PPP687
Spectrum - Cubic, Inc. A & K Finishing, Inc. - Plant 2 A & K Finishing, Inc. - Plant 1 Perfect Plastics Industries, Inc. Andover Industries - Andover Andover Industries - Meadville G. S. Industries of Bassett, Inc.
Grand Rapids Kentwood Kentwood New Kensington Andover Meadville Bassett
MI MI MI PA OH PA VA
17,006.27 22,453.81 22,345.15 0 150,121.83 26,781.31 9,101.09
8.50 Major source 11.23 Major source 11.17 Major source 0 Unknown 75.06 Major source 13.39 Major source Synthetic minor 4.55 source
35,837.21 35,705.86 30,042.64 17,365.87 200,835.60 1,711.60 29,482.45
1.04 Spectrum coats a variety of automobile interior plastic parts. Spectrum coats a variety of plastic and metal products, the majority of which are automotive parts. Two spray systems operate in the Cubic area and are 0.47 used to clear-coat the parts. 0.63 Coat a variety of automobile related plastic parts. 0.74 Coat a variety of automobile related plastic parts. Molding, finishing, and painting with water borne primer of auto bumpers for 0 the aftermarket 0.75 Mold and paint plastic injection molded parts; primarily exterior car parts. 15.65 We spray adhesion promoter and clearout on a single type of parts. 0.31 We coat plastic mirror frames Facility manufactures motor home components (front end assemblies, rear cap and misc. smaller Parts) utilizing open molds and gun chop, gel coat and 0.11 resin spray processes. Spray painting is used for repair. 0 We gelcoat Reinforced plastic parts. 0.88 Manufacture of one piece fiberglass swimming pools 0.08 Molder of components using fiberglass reinforcements and polyester resins.
3714
3070 3714 3089 308
RPC101 RPC111 RPC130 RPC158
Winnebago Industries, Inc. Downs Manufacturing Royal Fiberglass Pools, Inc. Molded Plastic Industries, Inc.
Hampton Lawton Breaux Bridge Holt
IA MI LA MI
8,232.60 0 147,968.02 7,192.97
4.12 Major source 0 Unknown Synthetic minor 73.98 source 3.60 Major source
74,674.51 68.00 167,957.98 92,291.10
3089
3089
Page 17 of 18
11/7/2009
067ec349-c81d-488d-a69d-ed33e5e5e9e6.xls
FACID
Facility_name
City
State
Total HAP (lbs)
Total HAP (tons)
Reported Title V Status
Total Solids (lbs)
lbs HAP/lbs solids
RPC163A RPC170B RPC180
Resolite TPI Composites, Inc. - Portsmouth Facility Fibertech Incorporated
Zelienople Portsmouth Franksville
PA RI WI
0 28,562.69 1,586.10
0 Major source 14.28 Synthetic minor 0.79 source
3,159.00 293,112.21 1,590.64
RPC195A RPC212 RPC212A RPC221 RPC228A RPC269A RPC269B
Core Materials Corporation - Columbus Sabre Yachts Sabre Yachts GHM, Inc. Glasstite West Nordic Fiberglass, Inc. Nordic Fiberglass, Inc.
Columbus Raymond Casco Orwigsburg Eloy Warren Devils Lake
OH ME ME PA AZ MN ND
56,108.49 156.16 238.90 717.19 4,724.94 22,406.14 19,427.74
28.05 Major source 0.078 Unknown 0.12 Unknown Minor or area 0.36 source Synthetic minor 2.36 source 11.20 Major source 9.71 Major source
75,801.09 2,584.81 2,579.65 2,230.04 11,569.35 32,401.03 28,094.03
Reported Facility_Description SIC Manufacture thermoset plastic composites panel by a continuous process and pultruded structural shapes by pultrusion equipment. We purchase a PET pan & center it on a thermoset plastic panel then use a tape to hold it in place 0 & then use silicone caulkin 3083 0.10 Manufactures custom molded OEM plastic resin products (I.e. Garden tractor 1.00 housings, etc.). Core Materials is a compounder and compression molder of sheet molding composites (SMC). The company produces fiberglass reinforced, molded products and SMC materials for the automotive and trucking industries, 0.74 recreational vehicles and commercial and in 3089 Manufacture sail and power yachts. Lam-up and construction of reinforced 0.06 fiberglass hulls and decks, which are then assembled. 0.09 Manufacturer of power yachts. 3732 Manufacturer of fiberglass reinforced plastic tanks for fire fighting apparatus. 0.32 Hand and spray lay-up molding and assembly of tanks. 3089 0.41 Manufacture fiberglass pickup truck toppers. We coat a product that we manufacture for the use in the Electric Utility 0.69 Industry. 0.69 We coat a product we manufacture used by the electric utility industry. We supply the lift truck industry with boom, buckets & small parts manufactured with fiberglass reinforced plastic. We hand lay up all parts. Buckets and small parts use gelcoat in mold coating. Booms are sanded & 0.47 automotive painted. Plastic tubing produced through extrusion process is coated. Currently no 0.93 tubing is being coated, data is for 1997. We coat fiberglass molds, then pour an expanding foam into mold and paint 0.45 adheres to the product Creative Pultrusions coats a variety of reinforced plastic parts manufactures 4.84 on-site. 0.14 Structural Fiberglass facility. Produce fiberglass composites through pultrusions process. Manufacture fiberglass grating, cable tray, handrail, ladders and perform custom fabrication. Do bonding, painting, sealing, coating 0.11 and cleaning. We coat walk in coolers and freezers made of fiberglass as manufactures on 0.10 site. We are a custom fabricator of corrosion resistant thermoset plastic parts. We apply gel coat to approximately 1% of our parts. We hand brush a top coat on 0.72 approximately 25% of our parts. 0 3089 3999 3999
RPC271 RPC291B RPC331 RPC338 RPC348
Hy-Tec Fiberglass Inc. Teel Plastics - Hitchcock Street Facility Mckenzie Sports Products, Inc. Creative Pultrusions, Inc GatorGrate
Ft. Wayne Baraboo Salisbury L\Alum Bank Atlantic Beach
IN WI NC PA FL
554.40 3,279.00 399.84 450.21 4,792.58
Minor or area 0.28 source Minor or area 1.64 source Synthetic minor 0.20 source 0.23 Major source 2.40
1,172.16 3,535.90 879.65 92.93 33,959.09
3089 326199 3999 3089
RPC348B RPC349
Seasafe, Inc. Polar King International, Inc.
Lafayette Fort Wayne
LA IN
3,611.11 367.72
Synthetic minor 1.81 source 0.18 Major source Minor or area 0.28 source 0 Major source Synthetic minor 0.14 source 0 Major source 5.72 Major source Minor or area 0.22 source
33,602.12 3,738.51
3089 3585
RPC350 RPC378
Chautauqua Fiberglass and Plastics, Inc. Astoria Industries of Iowa
Sharpsville Chariton
PA IA
567.00 0
783.00 500.00
RPC380 RPC397 RPC398 RPC404
Frontier Plastic Fabricators, Inc. Acme Fiberglass, Inc. Custom Fiberglass Manufacturing Co. Peterson Products
Tulsa Hayward Long Beach Belmont
OK CA CA CA
282.85 0 11,438.67 431.18
167.20 280.80 102,963.40 3,634.58
We are a contact molded custom fiberglass pipe and fittings manufacturer. At 1.69 times some fabrication jobs require adhesive joint assembly. 3089 0 Coating of some of the reinforced plastic parts manufactures at Acme. We manufacture Fiberglass Truck Caps and Lids, as part of this process we 0.11 glue liners in some units (50%) and we paint some units (90%). We secondarily paint a variety of reinforced plastic parts manufactured on 0.12 site.
Page 18 of 18
11/7/2009