Docstoc

Australia - SEW-Eurodrive

Document Sample
Australia - SEW-Eurodrive Powered By Docstoc
					Training made by SEW-EURODRIVE                                      1



                                 Australia




                                    DriveAcademy® – Training 2012
2

    Fit for your job with further training




                                                                             Dear SEW customers,

                                                                             Are your employees qualified to meet the challenges posed by drive technology in the future?
                                                                             This training program will support you in qualifying your employees for the most varying requirements of drive
                                                                             technology. We have placed special emphasis on the education requirements of our participants. This is why we have
                                                                             tailored our training courses to specific target groups.

                                                                             The result is more intensive training programs where expert trainers can guarantee an interesting training agenda
                                                                             with a great number of practical exercises. By running this training in our company-own training institute – the
                                                                             DriveAcademy® – we can also ensure a high degree of operational relevance.

                                                                             Your employees learn from systems just as they are used to in their company. For the most part we also have these
                                                                             models at our service and assembly plants in Australia, at headquarters in Germany and also at overseas locations,
                                                                             meaning the training can also be held in your area as an alternative.
                                                                             With our “Training for Drive,” we offer an excellent range of training in addition to our reliable and high quality drive
                                                                             technology.

                                                                             Feel free to contact us directly or contact our external sales team regarding your training requirements. We will gladly
                                                                             provide our assistance.

      Training 2012                                                          We look forward to continuing our successful training cooperation with you.

      Training for Drive                                                     Regards,
      We ensure practice-orientated and demand-specific training with
      state of the art equipment in an excellent learning environment. Our
      trainers have hands-on experience and know how to hold motivating
      training sessions.                                                     Nick Lobianco                                       Michael Stranieri
      Place your trust in this seal of quality:
      Training made by SEW-EURODRIVE

                                                                             General Manager                                     Technical Training Manager
                                                                                                                                                                            3

Training – your place or ours?




                                 Training – your place or ours?

                                 SEW-EURODRIVE enables your employees to get the best possible preparation for their daily work: with training courses that
                                 include many practical exercises in addition to the necessary theoretical basics. You choose the place where the training is held:
                                 either on-site at your company or at any of our Service Competence Centres close to you (see page 9 for locations map)

                                 Proximity to our customers is important to us. So that you can avoid any long journeys, we offer you training in Melbourne, Sydney,
                                 Brisbane and on request, other SEW locations are possible.



                                 Optimum learning environment
                                 The training centres (Service Competence Centres) of SEW-EURODRIVE are particularly suited for hands-on exercises. Multifunctional
                                 training models enable the participants to be optimally prepared for the tasks and problems they will encounter in their daily work. Far
                                 away from the everyday working environment, the mind is open for new things. Experimental facilities help to clarify all questions in a
                                 practical way.

                                 Practice-oriented
                                 We are constantly improving and expanding our training models so we can now offer participants two types of training models:
                                 – Transportable models and
                                 – Multifunctional training models

                                 Normally training takes place at the SEW Service Competence Centres. We can also hold training at your facilities on request. A training
                                 room with the appropriate setup will be required in this case.

                                 Prerequisites:
                                 – Sufficient room size for participants and units (ca. 50m2)
                                 – Project and screen
                                 – Board and flipchart
                                 – Depending on the demo units, 240V or 3*415V, 16A sockets are required
                                 – Enough sockets for demo units and laptops
                                 – The access ways must enable transportation of training models
4

    Project Planning

    Project planning for non-controlled drives

                               General information:            Target Group:       Seminar Objectives:

                               – Duration: 2 days              Design engineers,   Participants
                               – Basic knowledge of physics    project planners,   – Learn about the influence of the service factor
                                                               planners            – Can specify the dimensions for a gearmotor with brake
                                                                                   – Can do the project planning and selection of a gearmotor
                                                                                     with the SEW Project planning tool




    Project planning for controlled drives

                               General information:            Target Group:       Seminar Objectives:

                               – Duration: 3 days              Design engineers,   Participants are able to
                               – Requirements:                 project planners,   – Design a controlled drive
                                 Previous attendance or        planners            – Evaluate the features and limitations of various inverters
                                 knowledge of “Project                               and the influences and factors that are necessary to
                                 planning for non-controlled                         evaluate the drive selection
                                 drives” training                                  – Differentiate between the application areas of frequency
                                                                                     inverters




    Project planning for servo drives

                               General information:            Target Group:       Seminar Objectives:

                               – Duration: 2 days              Design engineers,   Participants are able to
                               – Requirements:                 project planners,   – Select a servo gearmotor and servo inverter with accessories
                                 Basic knowledge of drive      planners            – Evaluate the features of servo inverters and the influences and factors
                                 selection and frequency                             that are necessary to evaluate the drive selection
                                 inverter technology                               – Differentiate between the application of servo inverters
                                                                                                                                                                                5

MOVIDRIVE®
                                                                                                          i        Dates and contents of the individual training programs are
                                                                                                                   available on the internet at www.sew-eurodrive.com.au

Drive systems with MOVIDRIVE® B – functionality, parameter setting and program

                         General information:                 Target Group:                  Seminar Objectives:

                         – Duration: 5 days                   – Startup engineers            Participants are able to                   control with fieldbus and carry out
                         – Requirements:                      – Design engineers,            – Select the operating modes of            error diagnostics
                           Electrical engineering basics        project planners,              MOVIDRIVE® as well as motors and       – Program MOVIDRIVE® with IPOSplus®
                                                                planners                       encoders appropriate to the specific   – Start up absolute encoder
                                                                                               application                            – Start up application modules and
                                                                                             – Start up MOVIDRIVE® in the               technology functions
                                                                                               various operating modes and set        – Implement connection to
                                                                                               the parameters                           MOVI-PLC®
                                                                                             – Diagnose and repair faults             – Practical exercises in training
                                                                                             – Use the options of MOVIDRIVE®            system
                                                                                             – Satrt up MOVIDRIVE® for fieldbus,

MOVIDRIVE® B – operation, start-up and troubleshooting
                         General information:                 Target Group:                  Seminar Objectives:
                         – Duration: 3 days                   – Maintenance engineers,       Participants are able to                 – Anaylse and eliminate faults
                         – Requirements:                        startup engineers            – Start up a motor in VFC and CFC        – Control the inverter via fieldbus
                           Electrical engineering basics      – Design engineers,              operating modes                        – Carry out reference travel with
                                                                project planners,            – Set the parameters for terminals,      integrated positioning and sequential
                                                                planners                       setpoints, ramps and messages          control IPOSplus® and perform relative
                                                                                             – Backup data with PC and keypad         and absolute positioning
                                                                                               and load data to the inverter

MOVIDRIVE® and IPOSplus® programming
                         General information:                 Target Group:                  Seminar Objectives:
                         – Duration: 2 days                   – Startup engineers            Participants are able to                 – Perform absolute and relative
                         – Requirements:                      – Design engineers,            – Use positioning and IPOSplus®            positioning
                           Completion or knowledge level        project planners, planners     positioning and sequence control       – Structure and comment programs’
                           of the “MOVIDRIVE® B –                                            – Prepare the inverter for the           – Save data
                           compact seminar” or “MOVIDRIVE®                                     operation of IPOSplus® and perform     – Change speeds during ongoing
                           B – operation, startup and fault                                    startup                                  positioning
                           repair” seminar                                                   – Program IPOSplus® in the compiler      – Change fixed setpoints viaIPOSplus®
                                                                                               programming language                   – Start up application modules
                                                                                             – Evaluate the difference between        – Start up absolute encoders and
                                                                                               assembler and compiler program           the associated card and replace
                                                                                               ming language                            the encoder
                                                                                             – Perform reference travel
6

    MOVIDRIVE® and MOVITRAC® B


    MOVIDRIVE® B – synchronous operation control DRS

                             General information:                     Target Group:                    Seminar Objectives:
                             – Duration: 1 day                                  – Maintenance staff,             Participants are able to
                             – Requirements:                                      startup engineers              – Select the DRS components
                               Completion or knowledge level of the             – Design engineers,              – Connect the card according to the application
                               “MOVIDRIVE B- operation, startup                   project planners,              – Use the eight operating modes according to the application
                               and fault repair” seminar                          planners                       – Evaluate and eliminate malfunctions
                                                                                                                 – Evaluate the parameters relevant for synchronous operation
                                                                                                                 – Optimally set the DRS parameters




    MOVIDRIVE® B – IPOSplus® communication

                             General information:                        Target Group:                 Seminar Objectives:
                             – Duration: 1 day                           – Start up engineers          Participants are able to
                             – Requirements:                             – Design engineers,           – Start up the drive inverter for communication services
                             – Completion or knowledge level of the        project planners,           – Set the communication parameters for the drive inverter
                               “MOVIDRIVE® B- compact seminar” or          planners                    – Use the various communication services network units with one another
                               “MOVIDRIVE® B – operation, startup
                               and fault repair” seminar or “MOVI-
                               DRIVE® B – IPOSplus® programming”




    MOVITRAC® B – operation, startup and troubleshooting

                             General information:                     Target Group:                    Seminar Objectives:

                             – Duration: 1 day                        – Maintenance engineers,         Participants are able to
                             – Requirements:                            startup engineers              – Quickly diagnose and correct malfunctions
                               Electrical engineering basics or                                        – Save, load and copy parameters
                               qualification as electrician                                            – Work with integrated keypad
                                                                                                       – Connect the frequency inverter to a PROFIBUS system
                                                                                                       – Work with MOVITOOLS® MotionStudio
                                                                                                       – Set the parameters for the frequency inverter and carry out data backup
                                                                                                                                                                          7

MOVI–PLC® and Decentralized drive systems
                                                                                                     i       Dates and contents of the individual training programs are
                                                                                                             available on the internet at www.sew-eurodrive.com.au

Control Technology with MOVI-PLC® – basics and motion control

                         General information:                Target Group:              Seminar Objectives:
                         – Duration: 3 days                  – Maintenance staff,       Participants are able to
                         – Requirements:                       startup engineers,       – Handle the MOVI-PLC® confidently
                           Basic PLC knowledge                 repair staff             – Use the individual IEC 61131 programming languages
                                                             – Design engineers,        – Solve control tasks with MOVI-PLC® controller
                                                               project planners,        – Establish the communication between the MOVIDRIVE® inverter and the
                                                               planners                   MOVI-PLC® controller
                                                             – Trainers, teachers       – Program and start up the complex motion applications
                                                                                        – Perform data backup
                                                                                        – Use diagnostic tools


DOP11B – programming and diagnostics

                         General information:                Target Group:              Seminar Objectives:

                         – Duration: 1 day                  – Start up engineers        Participants are able to
                         – Requirements:                    – Design engineers,         – Choose the functions of DOP11b operating terminals appropriate to the
                           Basic knowledge of MOVIDRIVE® B,   project planners,           specific application
                           MOVITRAC® B, MOVI-PLC®,            planners                  – Set the parameters of the operator terminal to the various functions and
                           communication via RS-485 with                                  perform startup
                           MOVILINK® and Ethernet with SMLP                             – Connect the operating terminal via RS-485 or Ethernet with MOVIDRIVE® B,
                                                                                          MOVITRAC® B and MOVI-PLC®
                                                                                        – Diagnose faults and eliminate them



MOVIMOT® and MOVI-SWITCH® – operation, startup and fault repair

                         General information:                Target Group:              Seminar Objectives:

                         – Duration: 1 day                   – Maintenance engineers,   Participants are able to
                         – Requirements:                       startup engineers        – Wire and start up the MOVIMOT® and MOVI-SWITCH® drive systems, and
                           Basic knowledge of electrical                                  are familiar with the features and technical data of the system
                           engineering                                                  – Use the SEW service tools and know when they can be used
                                                                                        – Carry out speedy and safe diagnostics and error analysis
                                                                                        – Respond quickly and correctly during emergency operation by using tips
                                                                                          and tricks
8

    Maintenance, repair and condition monitoring

    Maintenance and repair of SEW gear motors

                             General information:
                             General information:                    Target Group:
                                                                     Target Group:               Seminar Objectives:
                                                                                                 Seminar Objectives:

                             – Duration: 2 days                       – Maintenance engineers,   Participants
                             – Requirements:                            repair staff             – Are familiar with the design and function if SEW gear units
                               Training as a specialist, mechanic,                               – Can service and disassemble an SEW gear unit, evaluate causes of damage
                               electrical engineer or electrician                                  and then professionally reassemble the gear unit again
                                                                                                 – Can carry out work independently on SEW drives
                                                                                                 – Are familiar with the functioning and application options of the SEW brake
                                                                                                   system
                                                                                                 – Are familiar with the electrical function and mechanical design of the brake
                                                                                                   system
                                                                                                 – Are able to set up and service a brake
    Condition monitoring systems for preventative maintenance

                            General information:                     Target Group:               Seminar Objectives:

                            – Duration: 2 days                       – Maintenance engineers,             The participants know the benefits of condition-oriented maintenance.
                            – Requirements:                            startup engineers,                 Participants are able to
                              Drive technology knowledge               repair staff                       – Start up the DUV10A vibration sensor
                                                                     – Design engineers,                  – Carry out an evaluation with the parameter setting software
                                                                       project planners,                  – Interpret the displayed values
                                                                       planners                           – Startup the DUA10A oil aging sensor
                                                                                                          – Startup the DUB for function and wear monitoring
                                                                                                                                             9

Training locations in Australia
                                                                            i   Dates and contents of the individual training programs are
                                                                                available on the internet at www.sew-eurodrive.com.au




Proximity to our customers is important to us. So that you can avoid long
journeys, we offer you seminars in Melbourne, Sydney, Brisbane and on
request in Perth and Adelaide.




      Head office, production plant
      (training offered)

      Production plant, customer service
      (training offered)

      Production plant, customer service
      (training on request)




Products and systems from SEW-EURODRIVE
are used all over the world: In industries such
as automotive, building and building materials,
food and consumer goods, metal processing or
wood processing. transportation and logistics,
in ports or airport, and many more.
10

     Seminar terms and conditions




     Registration                                                       Discounts                                                           Information

     We request early registration in writing. Where training has       If several employees of the same company take part in
     a limited number of participants, the date of the receipt of       the same training from the training brochure, the following         Training times
     registration is decisive. The sales and delivery terms and         discounts apply:
     conditions of SEW-EURODRIVE Pty Ltd are bindingly accepted         2 participants: 5 %                                                 1 day      8:30am - 5:00pm
     upon registration. The reservation of hotel accommodation          3 participants: 10 %                                                2 days+ 8:30am - 5:00pm
     is a voluntary service from SEW-EURODRIVE. Liability for the       4 participants: 15 %                                                The last training day ends early at 4pm
     reservation remains with the participant.
                                                                        Exclusion of liability                                              Safety Regulations
     Cancellation
                                                                        Technical information in the training and training documents        Training participants agree to adhere, particularly during
     Cancellation must occur in writing. Cancellation of a confirmed    are provided by us to the best of our knowledge. However,           the practice exercises, the safety and accident prevention
     registration can occur free-of-charge up to 4 weeks before         we do not assume liability for any mistakes in the technical        regulations in force on the SEW-EURODRIVE operation
     the start of the training. 50% of the participation fee will be    information imparted verbally or in writing in the training or      premises. In the case of training on-site with the customer,
     invoiced where cancellation occurs a week before the start         contained in the training documents provided. Equally, we           participants will adhere to the customer specific safety and
     of the training. Costs that arise due to cancellation of a hotel   cannot accept liability for any damage and follow-on damage         accident prevention regulations. Furthermore, the on-site safety
     reservation are not assumed by SEW-EURODRIVE.                      resulting from mistakes. This exclusion of liability does not       briefing instructions are to be followed.
                                                                        apply in cases of compulsory liability for intent or gross
     Training Contents                                                  negligence.                                                         Copyright

     – Training                                                         Subject to change                                                   The reproduction of course documents for unauthorized
     – Documents                                                                                                                            purposes as well as the distribution, exploitation and
     – Lunch, break snacks and drinks                                   We reserve the right to make the following changes:                 communication of their content to the third parties is not
                                                                        Training cancellations; claims for compensation or cancellation     allowed. Infringements are subject to compensation. The
     Fee*                                                               damages may not arise there from.                                   software provided by SEW-EURODRIVE during training for the
     The training fee is listed in the schedule. This must be paid      Adjustment of training content in line with the current state of    purpose of exercises may not be removed, or copied in part or
     once the invoice has been received. SEW-EURODRIVE’s general        the art without prior notification. In individual cases, this may   in whole, or used in any other, unauthorized way.
     delivery and business terms and condition apply to the payment     lead to differences from the training descriptions.
     of the seminar fee. Customised training has fees, please ask for                                                                       Places of jurisdiction
     conditions.
                                                                                                                                            The place of jurisdiction is Melbourne
     * Costs per training and per participant plus GST
                                                                                                                                                                                                                   11

2012 schedule
                                                                                                                                          i         Dates and contents of the individual training programs are
                                                                                                                                                    available on the internet at www.sew-eurodrive.com.au


Topics                                  Price*      Days   Pg    January    February         March     April     May         June         July        August     September     October    November     December

Project Planning
Project planning and selection for       $1000       2      4
non-controlled drives^
Project planning and selection for       $1500       3      4
controlled drives and VSD^
MOVIDRIVE® B
Functionality, parameter setting and    $1800        5      5                                                                          16-20 BRIS    20-24 MEL
programming
Operation, start-up and                 $1200        3      5                            27-29 SYD     18-20                                          8-10 MEL    11-13 SYD                7-9 MEL
troubleshooting                                                                          27-29 BRIS     MEL
IPOSplus® programming                    $800        2      5                                                  21-22 MEL   13-14 SYD                                                                   11-12 MEL
DRS^                                     $500        1      6                                                   30. MEL
IPOSplus® communication^                 $500        1      6                                                               1. MEL

MOVITRAC® B
Operation, startup and                   $400        1      6                                7. MEL             14. MEL     6. BRIS                   29. MEL      5. SYD                                5. MEL
troubleshooting                                                                              21. SYD
Control and Visualisation technology
MOVIPLC® Basics and motion              $1500        3     7                                                               19-21 SYD    25-27 MEL                 11-13 BRIS              21-23 MEL
control
Visualisation with DOP®                  $400        1     7                                                    25. MEL                                                        17. BRIS
Programming and diagnostics

MOVITRAC® LTE B
Operation, start-up and                  Free        1     N/A                               14. MEL                                                   3. MEL                                            3. MEL
troubleshooting

Decentralised Drives
MOVIMOT® and MOVISWITCH® -               $400        1     8                                 9. MEL             9. BRIS     28. SYD                    31. MEL                                           7. MEL
Operation, start-up, troubleshooting                                                                            16. MEL
Maintenance and condition monitoring
Maintenance and repair of SEW            $800        2     9                                                               26-27 SYD                                                      14-15 BRIS
gearmotors
Condition monitoring systems for         $400        1     9                                                    28. MEL
preventative maintenance^

* Costs per training and per participant plus gst                                                                                 Note: National Manufacturing Week 2012- 8th-11th May at the Sydney Showgrounds
^ Training topic on request

Register via fax, email or online:
Fax: (03) 9933-1003 Email: training@sew-eurodrive.com.au Website: www.sew-eurodrive.com.au
Training made by SEW-EURODRIVE




                                 SEW-EURODRIVE
                                 Driving the world




                                      SEW-EURODRIVE PTY LTD
                                      27 Beverage Drive (PO Box 59)
                                      Tullamarine VIC 3043
                                      Phone: (03) 9933 1000
                                      www.sew-eurodrive.com.au
                                      training@sew-eurodrive.com.au

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:4/7/2013
language:Unknown
pages:12