CNC Base Units
CNC Base Units
X/Y/Z CNC Base Units Series GFV/GFY
Overview
E 18
systems
ModuStar
E 20
ModuFix
E 22
Tool Kit Cooling System
E 23
Accessory
Main Spindle Drives - Asynchronous HSAH 2.05-SF HSAW 2.05-SDF
MAH 2.05-S MAW 2.05-SD MA 2.05-SF MA 4.05-SF
E 24
Main Spindle Drives - Asynchronous HSA 2.11-SF, HSA 4.11-SF HSAW 2.11-KF, HSAW 4.11-KF Main Spindle Drives - Accessory
MA 2.11-S MA 4.11-S MAW 2.11-K MAW 4.11-K MA 2.22-S MA 4.22-S MAW 2.22-K MAW 4.22-K
VakuFit
E 30
ROBOTIK
E 32
CNC Base Units
SYSTEMS
E3
CNC Base Units
systems
X/Y/Z CNC Base Units
Series ICP
ICP 4030
CNC Base Units of the series ICP are further developments of the proven ready-to-use 3D-capable CNC machines of the series CPM. Due to the newly developed sliding hood, the machines can now be operated from a sitting position, which, amongst others, results in decreased cycle times with regard to the hood's opening.
The chassis is completely screwed, and not welded like the forerunner models. This results in a more precise machine structure as well as in an improved maintainability. Furthermore, the resonance and vibration behaviour could be optimised and thus a lower noise development could be achieved.
E4
SYSTEMS
CNC Base Units
CNC Base Units
X/Y/Z CNC Base Units
Series ICP
systems
Technical Data
ICP 4030 ICP 3020 ICP 2015
Construction type Design Travel ranges (X/Y/Z) Travel speeds (X/Y/Z) Guides Passage height (from lower edge z-axis) Clamping table surface (W x D) Dimensions (W x D x H) Weight (basic configuration) Mode of drive
Chassis construction with protective hood
Chassis construction with protective hood
Chassis construction with protective hood
Gantry unit 400/300/140 mm 60/60/60 mm/s at spindle 16 x 10 mm Clearance-free precision steel shaft guides with shaft slide 170 mm 600 x 375 mm 780 x 850 x 810 mm Approx. 120 kg 2-phase high-torque stepping motors 4-axis micro-step stepping motor control, integrated into the machine, with RS 232 communication interface
Gantry unit 300/200/90 mm 60/60/60 mm/s bei Spindel 16 x 10 mm Clearance-free precision steel shaft guides with shaft slide 115 mm 500 x 250 mm 610 x 650 x 715 mm Approx. 102 kg 2-phase high-torque stepping motors 4-axis micro-step stepping motor control, integrated into the machine, with RS 232 communication interface
Gantry unit 200/150/90 mm 60/60/60 mm/s bei Spindel 16 x 10 mm Clearance-free precision steel shaft guides with shaft slide 100 mm 400 x 250 mm 535 x 600 x 690 mm Approx. 95 kg 2-phase high-torque stepping motors 4-axis micro-step stepping motor control, integrated into the machine, with RS 232 communication interface
Control
Ordering Data
Item no. Description Ball screw drive (mm)
Power electronics Integrated power electronics IMC4 Integrated power electronics IMC4 Integrated power electronics IMC4 Integrated power electronics IMC4 Integrated power electronics IMC4 Integrated power electronics IMC4
280200 1404 280201 1404 280210 1406 280211 1406 280220 1405 280221 1405
ICP 2015 KG-TR ICP 2015 KG-TR ICP 3020 KG-TR ICP 3020 KG-TR ICP 4030 KG-TR ICP 4030 KG-TR
16 x 10 16 x 4 16 x 10 16 x 4 16 x 10 16 x 4
CNC Base Units
SYSTEMS
E5
CNC Base Units
systems
X/Y/Z CNC Base Units
ICV 4030 with DC Servo Motor Drive
• Complete solution with - DC servo motors - DC power electronics - Control program • Perfect for training and small series production • For basic machinings like drilling, milling and engraving, customer applikations like dosing, measuring, Positioning, etc. • For machining light metal, plastic, wood and printed circuit board materials • Prepared for an exhauster • Integrated DC power electronics for 4 axes • Controllable by almost any standard PC with parallel port (EPP version 1.9). • Extendable by 16 inputs and 8 outputs by using a „Multi-I/O“ board The ICV 4030 is a further development of the proven ready-to-use 3D capable CNC machine CPV 4030. The redeveloped, upward opening sliding hood can now be operated comfortably from sitting position. As a consequence of the completely bolted chassis higher precision is the result of the structure of the machine as well as an improved ease of servicing compared to the welded chassis of the CPM series. Furthermore the resonance and vibration behaviour could be optimized and thus a smaller noise development be achieved. The only preconditions that are needed for working with the ICV 4030 are basic knowledge in CNC technology, general PC knowledge as well as basic knowledge in graphic programs! • Complete solution from construction up to production by the optional CAD/CAM software package isy-CAM 2.5
E6
SYSTEMS
CNC Base Units
CNC Base Units
X/Y/Z CNC Base Units
Technical Data
Type of construction Design Traversing range (X/Y/Z) Traverse rate (X/Y/Z) Guides Passage hight (lower edge Z axis) Clamping table surface (W x T) Weight (standard equipment) Control Mode of drive
ICV 4030 with DC Servo Motor Drive
systems
Chassis construction with protective hood Gantry system 400/300/110 mm >80/80/80 mm/s with spindle 16 x 10 mm Play-free precision steel shaft guides with bearing carriage 170 mm 600 x 375 mm approx. 130 kg Integrated 4 axis servo controller, EPP interface DC servo motors
Dimensions
Ordering Data
Item no. 280225 2405 280220 2405 280110 9001 280120 9012 280120 9003 280120 9010 280120 9004 420003 0500 420003 1050 290903 Z13-337020 310705 1511 310705 2511 Description ICV 4030 with integrated power electronics, ball screw 16x5 mm, without spindle motor, without software, chassis colour RAL 7035/5022 ICV 4030 as described above, but with ball screw 16 x 10 mm Exhauster for ICV 4030 Cooling/spraying device for ICV 4030 Engraving mat for ICV 4030 Lenght measuring sensor for ICV 4030 Workspace illumination for ICV 4030 Milling motor 500 W, 11.000...25.000 min-1 Milling motor 1050 W, 11.000...25.000 min-1 Clamping block for drilling/milling machines isy-CAM 2.5 (light) 2,5D-CAD/CAM software Spindle drive HSAH 2.05 SF, 500 W, 300...24.000 min-1 Spindle drive HSAW 2.05 SDF for automatic tool change, 500 W, 300...24.000 min-1 Tool changing station, tenfold; isy-CAM 3.0; ProNC; RemoteWIN; control computer
On request
CNC Base Units
SYSTEMS
E7
CNC Base Units
systems
Flat Bed and Gantry Units
FB2 / PA1 / PA2
Flat Bed Unit with Z Axis
Gantry Unit with Z Axis
isel X/Y/Z multiple axis units, handling units and positioning units with travels from 250 to 1250 mm are constructed on the basis of a modular system. Stepper motors up to 300 Ncm and playfree ballscrew drives with a repetition accuracy of ± 0.01 mm (positioning reproductibility) are used as axis drives. The linear guides that we use are the successful isel double track drives, proven for many years, with play-free linear ball bearings and ball screws with an accuracy of ± 0.01 mm. In this redesigned version, all units are now equipped with two limit switches per axis.
The machining and positioning units are available in several constructions and different sizes and are characterised by low-friction running and high travel speeds. Low weight and high accuracy are achieved by using high quality aluminum compontnts with surfaces, trimmed by milling. The isel X/Y/Z units are the ideal basis for the construction of machines for: automatic placement and mounting, printing and engraving, drilling and milling, dosing and screwing, forming and modelling, glueing and sealing, soldering and welding, measuring and checking, sawing and cutting, etc.
Options for the Flat Bed Units
• adapted controllers for different application ranges • Software modules for the operation in CAM, CNC and SPS applications • DC servo motors instead of stepper motors (standard feature) • intelligent stepper motors (with integrated power electronics) • without motors, with input shaft extension • different ball screw thread pitches (2,5 mm or 5 mm) • Underframe (see picture on the left) • Enclosed hood • Other accessories see page E23 – E 31 E8 SYSTEMS CNC Base Units
Controller C-142 controlled by a Laptop
CNC Base Units
Ordering Data
X/Y-Flat Bed Units FB2
Item No. Without Motor Item No. Clamp. surface (mm) Travel (mm) Passage (mm)
FB2 / PA1 / PA2
Underframes for the Flat Bed Units
500 x 530 750 x 530 850 x 780 1,250 x 1,030 500 x 530 750 x 530 850 x 780 1,250 x 1,030 500 x 530 750 x 530 850 x 780 1,250 x 1,030 190 190 190 190 300 300 300 300 500 500 500 500
Item no. suitable for flat bed unit with clamping surface:
systems
246 203 246 203 2040 246 203 2067 246 203 2130 246 203 3027 246 203 3040 246 203 3067 246 203 3130 246 203 5027 246 203 5040 246 203 5067 246 203 5130
246 208 246 208 2040 246 208 2067 246 208 2130 246 208 3027 246 208 3040 246 208 3067 246 208 3130 246 208 5027 246 208 5040 246 208 5067 246 208 5130
850 x 750 1,100 x 750 1,350 x 1,000 1,750 x 1,250 850 x 750 1,100 x 750 1,350 x 1,000 1,750 x 1,250 850 x 750 1,100 x 750 1,350 x 1,000 1,750 x 1,250
248 500 0027 248 500 0040 248 500 0067 248 500 0130
850 x 750 1,100 x 750 1,350 x 1,000 1,750 x 1,250
All flat bed units are equipped with a 16 x 4 mm ball screw as standard
Z axes for the Flat Bed Units
Item No. Stroke (mm)
230 514 0300 230 514 0400 230 514 0500 230 514 0700
75 160 260 460
with electromagnetic brake 24 V with electromagnetic brake 24 V with electromagnetic brake 24 V with electromagnetic brake 24 V
Enclosed Machine Hood for the Flat Bed Units
Item no. suitable for flat bed unit with clamping surface:
248 200 0000 248 200 2040
850 x 750 1,100 x 750 1,350 x 1,000 1,750 x 1,250
Gantry Units PA1 / PA2
Item no. Without Motor Item no. Travel (mm) Ball screw drive (mm) Stroke (mm)
248 200 2067 248 200 2130
242 401 242 402 243 401 243 402
242 408 242 409 243 408 243 409
240 x 280 280 x 490 240 x 280 280 x 490
16 x 4 16 x 4 16 x 4 16 x 4
75 75 without Z axis without Z axis
Software
Item no.
Z13-33 7020
isy-CAM 2.5 light (only available in combination with an unit)
Attention: The matching underframe has to be ordered separately.
CNC Base Units
SYSTEMS
E9
CNC Base Units
systems
X/Y/Z CNC Base Units
GFM 4433
The isel-CNC base units of the series GFM 4433 are stable C-frame-type CNC machines made of lightweight profiles. All linear axes run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 spindles with a pitch of, optionally, 5 or 10 mm are used as drives. The linear axes are driven by powerful and robust stepping motors in easy-to-maintain drive modules. The machine table, which is firmly screwed with the underframe, is made of plan-milled precision T-nut profiles. It provides optimal clamping possibilities for the most different and workpiece holders and devises. The protective hood, which features Perspex-lined
glass and a swivelling door made of aluminium profiles, constitutes a closed working room with hood lokking. The complete control and power electronics is integrated into the underframe, wired ready for connection. The PC control under Windows with RS 232 interface is executable on each standard PC. The control offers three relay switching outputs, AC 230 V/50 Hz. The isel-CNC base units of the series GFM 4433 are ideal for individually assembling applications in the fields: positioning, milling/drilling, graving, dosing, screwing, measuring, etc.
E10
SYSTEMS
CNC Base Units
CNC Base Units
X/Y/Z CNC Base Units
Technical Data
Travel range X-axis Travel range Y-axis Travel range Z-axis
GFM 4433
systems
Passage height (from lower edge z-axis)
Clamping table (W x D)
Dimensions (W x D x H)
330 mm
430 mm
160 mm
200 mm
375 x 900 mm
780 x 1,010 x 1,740 mm
Ordering Data
Item no. Description Ball screw drive (mm)
Power electronics Integrated power electronics IMC4 Integrated power electronics IMC4
274 400 1001 274 400 1002
GFM 4433 GFM 4433
16 x 10 16 x 5
Z13-337020
Software isy®-CAM 2.5 light (available only in combination with a unit)
Option: GFM 4433 base units are also available as OEM version without hood.
CNC Base Units
SYSTEMS
E11
CNC Base Units
systems
Base Units K Series
...with isel Motor Drive Technology
For more details about the new isel Motor Drive Technology IMD, please refer to page C8/C9
EUROMOD-P without cover, with extended Y axis travel
EUROMOD-F without cover
EUROMOD base units are ready-to-use CNC systems with a great ease of use for a large number of tasks and applications that can be automated. Rigid, low vibration steel and aluminium constructions made of isel system profiles and system elements are the mechanical basis for the EUROMOD base units. The isel ball screw drives with steel spindles 16 x 5 mm, used in the positioning axes, provide for high precision. When developing the EUROMOD base units, the focus was especially put on a small space requirement. Both base units need the floor space of an euro pallet (1,200 x 800 mm) as a maximum. Like the mechanics, the electronics of the EUROMOD is also "cast from the same mould". The drive motors of the newly developed isel motor drive (IMD) series are optimally matched to the mechanics, the power electronics and the control. As a result of this, high power, quiet running and sufficient reserves are provided to the user.
The two models EUROMOD-F and EUROMOD-P differ by their basic mechanical structure. Both models are available with or without protective cover. The versions with cover are equipped with an automatic door opener, which is controllable by software, for example. In case of the EUROMOD-P, the portal section is fixed and the workpiece is being moved within this rigid section. As a consequence, this design is particularly suitable for the precise, machine cutting treatment and for multi-axis machining. Through the exchangeability of the Y axis, the feed range of the version without cover is extendable for special applications without a loss of precision. The EUROMOD-F with mobile portal is well suitable for large area machining and for heavy workpieces, which do not have to be moved with this version. Functional accessories of our own development and manufacturing are also available for the EUROMOD base units.
E12
SYSTEMS
CNC Base Units
CNC Base Units
Base Units K Series
Fields of Application
EUROMOD base units constitute the basis for the composition of machines and constructions for: • assembling and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modelling • pasting and casting • laser and water jet cutting • soldering and welding • measuring and verifying • sawing and cutting ... and other applications EUROMOD-P with opened cover
systems
Available options for the EUROMOD Base Units
• DVD drive • Ball threaded spindle, pitches 2,5 mm or 10 mm (standard: 5 mm) • Milling and engraving spindles • Tool changing station • Tool levelling • Cooling/spray units • Vacuum clamping table • Exhaust device (in preparation) • Safety light curtain
EUROMOD-F without cover, back view
Technical Data
EUROMOD-P IMD Feed range ( X / Y / Z ) [mm] Clamping table surface [mm] Z-throughput [mm] Spindle pitches ( X / Y / Z ) [mm] Dimensions with control cabinet and cover ( W / D / H ) [mm] 500 / 300 / 285 310 / 596 350 5/5/5 EUROMOD-F IMD 350 / 530 / 150 310 / 890 185 5/5/5
1,200 / 800 / 1,900
800 / 1,200 / 1,500
CNC Base Units
SYSTEMS
E13
CNC Base Units
systems
1
...with isel Motor Drive Technology IMD
GANTRY Base Units K Series
g Be Timin Drive
ON O P T I with ies Z-Ser lt Feed
OPTI
ON
y Safet in Curta Light
For more details about the new isel Motor Drive Technology IMD, please refer to page C8/C9
FLATCOM with closed cover
FLATCOM Base units are a modular design series with multiplies axes options with a max. of 5 axes configuration. The FLATCOM series are constructed to facilitate high rigidity and low vibrations, offering machining and positioning capability with travel ranges from 600 to 1,400 mm The standard gantry clearance is 200 mm with (optional 300 mm) The anodized aluminium profiles used for the FLATCOM construction are isel own special profiles combining high stiffness and low weight factor. The Z-axis with T-slot profile (pitch dimension 25 mm) allows for mounting various attachments offering many types of applications. The FLATCOM base units are delivered in five basic rack design sizes. They are available with or without protecting
cover, with add-on control cabinet as well as the isel CNC control panel and arm unit. Space-saving vertically opening doors are installed as protecting covers. Ballscrews with isel motors offering a positional repeatability of +/-0.01 mm serve as axis drives for the K series The linear units are highly accurate with high torsion resistance with preloaded linear bearings and anti-backlash ballscrews assemblies. All units are fitted with two limit switches per-axis. The standard FLATCOM base units as well as custom made solutions are constructed with isel range of components, offering smooth and high speed travel.
E14
SYSTEME SYSTEMS
CNC Base Units
CNC Base Units
systems
1
GANTRY Base Units K Series
General applications
FLATCOM GANTRY base units are constructed for examples: • Assembling and mounting operations • Printing and engraving • Drilling and milling • Dispensing and screw fixing • Shape forming and modelling • Pasting and casting • Laser and water jet cutting • Soldering and welding • Measuring and test reporting • Sawing and cutting and many other possible applications
Options available for the FLATCOM GANTRY Base Unit
• DVD drive • Ball threaded spindle, pitches 2,5 mm or 10 mm (standard: 5 mm) • Milling and engraving spindles • Tool changing station • Tool levelling • Cooling/spray units • Vacuum clamping table • Exhaust device (in preparation) • Safety light curtain
FLATCOM 40-H with undercarriage, protection cover and machine operating console
FLATCOM 40-U with undercarriage, without Cover
CNC Base Units
SYSTEMS
E15
CNC Base Units
systems
1
Scale Drawing / Dimensions
GANTRY Base Units K Series
FLATCOM with Undercarriage, without Cover
FLATCOM with Undercarriage and Cover
A FLATCOM 1/20 FLATCOM 1/30 FLATCOM 1/40 FLATCOM 1/50 750 1,000
B 750 750
C
D
E 650
F 1,150
1,000 1,200
1,000 1,200 1,250 1,450
1,000 1,250 1,500 1,700 1,250 1,450 1,500 1,250 1,500 1,700 1,750 1,950
Technical Data
FLATCOM 1/20 Feed range (X/Y) [mm] Surface clamping table [mm] Z-travel [mm] Z-throughput [mm] Dimensions with control cabinet and cover [mm] W = 1,420 D = 1,150 H = 1,870 700 / 600 750 / 750 FLATCOM 1/30 700 / 900 750 / 1,000 FLATCOM 1/40 1,200 / 900 1,250 / 1,000 FLATCOM 1/50 1,200 / 1,400 1,250 / 1,500
150 (optionally 250, each without machining facility) 200 (optionally 300, each without machining facility) W = 1,420 D = 1,450 H = 1,870 W = 1,920 D = 1,450 H = 1,870 W = 1,920 D = 1,950 H = 1,870
E16
SYSTEMS
CNC Base Units
CNC Base Units
systems
1 GANTRY Base Units K Series
...with isel Motor Drive Technology IMD
ON O P T I with ies Z-Ser lt Feed
g Be Timin Drive
W Panes indowDoor W d an
ON OPTI t ithou
For more details about the new isel Motor Drive Technology IMD, please refer to page C8/C9
OVERHEAD 20 with opened cover
The OVERHEAD GANTRY CNC base unit is a special version of our FLATCOM series. The design solution moves the conventional support and drive system above the work area and the axis modular units are mounted in the upper frame of the machine. Thereby allowing free access for loading and unloading of work pieces from all sides.
The concept is particularly suitable for applications such as laser and water jet cutting, pick and place operations and general machining. Coolants and swarf do not effect the general machine efficiency.
Technical Data
OVERHEAD 1/20 Feed range (X/Y) [mm] Surface clamping table [mm] Z-travel [mm] Z-throughput [mm] Dimensions with control cabinet and cover [mm] W = 1,420 D = 1,150 H = 1,870 W = 1,420 D = 1,450 H = 1,870 700 / 600 750 / 1,000 OVERHEAD 1/30 700 / 900 750 / 1,000 200 250 W = 1,920 D = 1,450 H = 1,870 W = 1,920 D = 1,950 H = 1,870 OVERHEAD 1/40 1,200 / 900 1,250 / 1,000 OVERHEAD 1/50 1,200 / 1,400 1,550 / 1,500
CNC Base Units
SYSTEMS
E17
CNC Base Units
systems
Ordering Designations
EuroMod-F-Series
Stepping Motor Drive Technology
Item no. 275123 62155 275122 62155 Description
Base Units K-Serie
CNC base unit EUROMOD-F, with undercarriage and protecting cover, feed range 350 x 530 mm CNC base unit EUROMOD-F, with undercarriage, without protecting cover, feed range 350 x 530 mm
Servo Motor Drive Technology
Item no. 275123 32155 275122 32155 Description CNC base unit EUROMOD-F, with undercarriage and protecting cover, feed range 350 x 530 mm CNC base unit EUROMOD-F, with undercarriage, without protecting cover, feed range 350 x 530 mm
EuroMod-P-Series
Stepping Motor Drive Technology
Item no. 275093 63455 275092 63455 Description CNC base unit EUROMOD-P, with undercarriage and protecting cover, feed range 500 x 300 mm CNC base unit EUROMOD-P, with undercarriage, without protecting cover, feed range 500 x 300 mm
Servo Motor Drive Technology
Item no. 275093 33455 275092 33455 Description CNC base unit EUROMOD-P, with undercarriage and protecting cover, feed range 500 x 300 mm CNC base unit EUROMOD-P, with undercarriage, without protecting cover, feed range 500 x 300 mm
Accessory
Item no. 320 200 1001 320 300 320 300 0001 314 020 321 000 1000 390 221 371 052 0102 371 052 0112 371 051 0102 371 051 0112 Description CAN dongle at the parallelport Mini CAN PCI card PCI adaptercard for mini CAN PCI card IMD- 1 - power final stage CAN I/O module In-/output-module USB I/O 8/8 PC control panel 17”- Monitor, german keyboard PC control panel 17”- Monitor, english keyboard PC control console 17”- Monitor, german keyboard PC control console 17”- Monitor, english keyboard
E17a
SYSTEMS
CNC Base Units
CNC Base Units
systems
Ordering Designations
FlatCom
Stepping Motor Drive Technology
Item no. 275023 62355 275033 62355 275043 62355 275053 62355 275022 62355 275032 62355 275042 62355 275052 62355 Description
Base Units K-Serie
CNC base unit FLATCOM 20-SH, with undercarriage and protecting cover, feed range 700 x 600 mm CNC base unit FLATCOM 30-SH, with undercarriage and protecting cover, feed range 700 x 900 mm CNC base unit FLATCOM 40-SH, with undercarriage and protecting cover, feed range 1,200 x 900 mm CNC base unit FLATCOM 50-SH, with undercarriage and protecting cover, feed range 1,200 x 1,400 mm CNC base unit FLATCOM 20-SU, with undercarriage, without protecting cover, feed range 700 x 600 mm CNC base unit FLATCOM 30-SU, with undercarriage, without protecting cover, feed range 700 x 900 mm CNC base unit FLATCOM 40-SU, with undercarriage, without protecting cover, feed range 1,200 x 900 mm CNC base unit FLATCOM 50-SU, with undercarriage, without protecting cover, feed range 1,200x1,400 mm
Servo Motor Drive Technology
Item no. 275023 32355 275033 32355 275043 32355 275053 32355 275022 32355 275032 32355 275042 32355 275052 32355 Description CNC base unit FLATCOM 20-VH, with undercarriage and protecting cover, feed range 700 x 600 mm CNC base unit FLATCOM 30-VH, with undercarriage and protecting cover, feed range 700 x 900 mm CNC base unit FLATCOM 40-VH, with undercarriage and protecting cover, feed range 1200 x 900 mm CNC base unit FLATCOM 50-VH, with undercarriage and protecting cover, feed range 1200 x 1400 mm CNC base unit FLATCOM 20-VU, with undercarriage, without protecting cover, feed range 700 x 600 mm CNC base unit FLATCOM 30-VU, with undercarriage, without protecting cover, feed range 700 x 900 mm CNC base unit FLATCOM 40-VU, with undercarriage, without protecting cover, feed range 1,200 x 900 mm CNC base unit FLATCOM 50-VU, with undercarriage, without protecting cover, feed range 1,200x1,400mm
OverHead 1
Stepping Motor Drive Technology
Item no. 275223 62355 275233 62355 275243 62355 275253 62355 Description OVERHEAD 1/20, feed range 700 x 600 mm OVERHEAD 1/30, feed range 700 x 900 mm OVERHEAD 1/40, feed range 1,200 x 900 mm OVERHEAD 1/50, feed range 1,200 x 1,400 mm
Servo Motor Drive Technology
Item no. 275223 32355 275233 32355 275243 32355 275253 32355 Description OVERHEAD 1/20, feed range 700 x 600 mm OVERHEAD 1/30, feed range 700 x 900 mm OVERHEAD 1/40, feed range 1,200 x 900 mm OVERHEAD 1/50, feed range 1,200 x 1,400 mm
CNC Base Units
SYSTEMS
E17b
CNC Base Units
systems
X/Y/Z CNC Base Units
Series GFV/GFY
Illustration: CNC base unit as milling application
The isel-CNC base units of the series GFV and GFY are stable C-frame-type CNC machines made of aluminium special profiles. All linear axes of the linear units LES 5 (x- and z-axis) and LES 6 (y-axis) that are use here run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 spindles with a pitch of, optionally, 2.5/4/5 or 10 mm are used as drives. The linear axes are driven by powerful and robust DC or AC servo motors in easy-to-maintain drive modules. The machine table, which is firmly screwed with the underframe, is made of plan-milled precision T-nut profiles. It provides optimal clamping possibilities for the most different and workpiece holders and devises. The underframe is a honeycomb construction made of stable aluminium panel profiles and aluminium pillar profiles. The protective hood, which features Perspex-lined glass and aluminium profiles, constitutes a closed working room.
When the sliding doors with security locking are open, the entire width of the working room can be used to load and unload. The isel-CNC base units of the series GFV and GFY are ideal for individually assembling applications in the fields: positioning, milling/drilling, graving, laser beam processing, water jet cutting, dosing, screwing, measuring, etc. The control cabinet which is attached to the machine provides enough space for the control of up to seven axes. An extension by means of additional modules is easily possible. The modern PC-based CAN-CNC control for Windows NT/2000/XP offers highest ease of use and performance. Because of the two-wire technique, the assembly of special machines with individual attachment parts is easily possible without great wiring effort. The plant can be operated with the user-friendly iselmachine terminal with integrated PC.
E18
SYSTEMS
CNC Base Units
CNC Base Units
X/Y/Z CNC Base Units
Series GFV/GFY
systems
Common Data/Characteristics of the X/Y/Z CNC Base Units
Effective travel ranges: Clamping surface: Portal passage: Drive system: Travel speeds: Repeatability depending: Weight: from 440 x 480 mm to 1,380 x 2,480 mm, z-axis 220 or 300 mm from 625 x 1,100 mm to 1,500 x 3,050 mm optionally 235 mm or 435 mm DC (series GFV) or AC (series GFY) servo drives, precision ball screw spindle 8 m/min (series GFV); 12 m/min (series GFY) on the assembly of the plants; on average approx. 0.02 mm 450 kg to 650 kg CNC Control Console/CNC Control Panel (optional) Ideally, the machine is operated by means of an isel-CNC Control Console/CNC Console Panel with integrated PC. Light curtain (optional) Further OEM options Depending on the application, the following options can be offered together with the GFV-SW machine: milling motor/main spindle drive: power up to 2.2 kW and revolution up to 40,000 rpm automatic tool changer for up to 10 tools different cooling and spraying systems rotary axis for the cylinder machining or further auxiliary axes working room lighting machine without encasement outside-located limit switches The control of all additional components is already integrated into our software.
CNC Control (optional) The isel-CAN-CNC control is used for the isel-CNC base units of the series GFV/GFY. PC-based CNC control for Windows NT/2000/XP CAN bus as field bus for the communication between CNC PC and drives as well as peripheral devices such as I/O, operating panel Midget dongle at the parallel port or PCI plug-in card serve as CAN interface Up to 6-axis interpolation (linear, circular, helix) Up to 127 CAN modules as auxiliary axis, I/O, frequency converter Look-ahead track handling Efficient and easy-to-use operating and programming surface WinRemote, ProNC Multi-channel technique (control of up to 4 CNC machines by means of one PC) Control Cabinet (optional) The control cabinet with the isel-CAN-CNC control includes all drive components for the control of up to 7 CNC axes, a frequency converter, as well as all peripheral devices in a clearly arranged and easy-to maintain manner. Extensions are easily possible.
Ordering Data
Item no.. GFV 48/52-SW with protective hood GFV 102/72-SW with protective hood GFV 102/112-SW with protective hood GFV 142/112-SW with protective hood GFV 142/162-SW with protective hood GFV 142/252-SW with protective hood Dimensions (W x D x H) Travel ranges (X x Y x Z) Passage height Clamping surface (W x D at approx. 800 mm altitude)
274 551 0011 274 552 0011 274 553 0011 274 554 0011 274 555 0011 274 556 0011
1,440 x 1,320 x 1,890 mm 2,084 x 1,584 x 1,890 mm 2,084 x 1,984 x 1,890 mm 2,459 x 1,984 x 1,890 mm 2,459 x 2,484 x 1,890 mm 2,459 x 3,384 x 1,890 mm
480 x 520 x 220 mm 1,020 x 720 x 220 mm 1,020 x 1,120 x 220 mm 1,420 x 1,120 x 220 mm 1,420 x 1,620 x 220 mm 1,420 x 2,520 x 220 mm
235 mm 235 mm 235 mm 235 mm 235 mm 235 mm
625 x 1,100 mm 1,125 x 1,300 mm 1,125 x 1,700 mm 1,500 x 1,700 mm 1,500 x 2,200 mm 1,500 x 3,050 mm
Option: Series GFY upon request
Passage height optionally 435 mm
CNC Base Units
SYSTEMS
E19
CNC Base Units
systems
Generel Characteristics
The concept of the ModuStar is based on a machine rack as standardized basis module and flexible attachments on both sides. The outcome of this is a variable size of the worktable (Y axis) from 1,050 mm to a maximum of 2,800 mm in 350 mm steps. The basis module offers the possibility for mounting different axis configurations (gantry - Z axis; X-Z axis conventional). Up to 5 axes can be integrated thereby. Depending on the customer's requirements, the ModuStar can be shipped with or without protecting hood. Travel: X axis max. 2,000 mm // Z axis 400 mm // Y axis up to max. 3,000 mm
Application fields
Basis for the construction of machines and systems for: • Drilling and milling • Laser and waterjet cutting • Measuring and testing • Soldering, welding and many more applications
Options
• Milling spindles up to 7.5 kW • 2x eightfold tool changer • Vacuum clamping table (max. length 2,100 mm) • Hood with automatic sliding door • Cooling / spraying unit • Extraction system (in preparation)
Required space: 2,400 x max. 8,000 mm (W x D)
E20
SYSTEMS
CNC Base Units
CNC Base Units
systems
Mechanical Features
• Rigid rack design (honeycomb construction) made from isel aluminium system elements • Attachments available in different lengths • Retrofit protective hood • Space-saving sliding doors • Design of all linear axes with steel shafts and steel carriages • Ball screws, adjusted free from play • Worktable made of surface milled T-slot profiles
Electronical features
• All axes driven by servo motors • Control cabinet with integrated control computer • CANopen drive control • Servo power output stage with encoder interpretation • Integrated spindle control • I/O module with additional inputs and outputs • Programmable safety circuit module • Pre-assembled CNC operating panel
Dimensions
CNC Base Units
SYSTEMS
E21
CNC Base Units
systems
1
s: roller D or l Cont IM ptiona troller C1O is Con l Box Ax Single Contro
General Information
The flexible ModuFix system is based on proven and new isel drive components. Depending on the customer requirements, well-priced linear units with timing belt or ball screw drive can be used. High-power direct drives (without transmission) are available for fast and precise tasks with positioning requirements in the µm range. The ModuFix system can also be combined with isel rotary axis units and rotary/swiveling units. In this case, torques up to 240 Nm can be requisitioned. The variety of possibilities enables our customers to find their specific problem solution in line with the cost effectiveness, that isel is well-known for.
Features
Optimal in the combination of different drive concepts Basic configurations with control boxes for up to 5 axes Economical solution for alternating positioning tasks Ideal also for pick and place, dispensing, testing and inspection tasks Vacuum clamping system isel VakuFit (optional)
Dimensions
ModuFix Type 1 / 10 1 / 20 1 / 30 1 / 40 Description W 1,150 x D 750 x H 750 mm W 1,500 x D 750 x H 750 mm W 2,000 x D 750 x H 750 mm W 2,500 x D 750 x H 750 mm
E22
SYSTEMS
CNC Base Units
CNC Base Units
systems
Tool Cooling System
isel Asynchronous Spindle Motor
Rated power 500 W Speed max. 24,000 rpm isel low temperature cooling system can be integrated (down to -20°C, isel patent) Tools with internal cooling can be used Very good concentricity by means of a new bearing technology isel frequency converters are matched to the asynchronous motors 500 W – Item no.: 310 705 2531 Direct changer 500 W – Item no.: 310 705 1532 Manual changer
isel Low Temperature Cooling System
Dry cutting machining is the first choice wherever material, wear of the tool and surface quality permit. The above-mentioned criteria, however, often require cooling. And cooling has meant to date: Humidity. Even the lowest-volume spray cooling involves unpleasant secondary effects: Contamination and sticking chips on the tool or on the surface, and - depending on the material - also negative effects for the structure of the material.Thanks to the patented low temperature cooling, which provides for optimum cooling of tool and surface, any secondary effects can be neglected. The chips are dry and - depending on the material - easy to suck or blow away. The surface is handled gently, and the direct cooling of the tool means very long service lives of the tools, thanks to a cold-air nozzle which divides the air flow into hot and cold air according to the eddy current principle. Only compressed air ( 6 ... 10 bar) is required as energy.
Technical data:
Compressed-air input : 6 ... 10 bar Cooling air : down to approx. -20 °C Installation: optional integration with isel asynchronous spindle motor. Externally as an add-on for existing spindles.
optimal cold air flow (up to -20˚ C) for tool cooling and swarf evacuation
CNC Base Units
SYSTEMS
E23
Main Spindle Drives
Accessory
systems
Main Spindle Drives - Asynchronous
Spindle Motor
MAW 2.05-SD
HSAH 2.05-SF HSAW 2.05-SDF
Nominal power output 500 W Speed range 300...24,000 min-1 Nominal torque 0.26 Nm Tool changing manually with collets (MAH 2.05-S) and/or directly with pneumatic lifting cylinder (MAW 2.05-SD) Overall size 56
MAH 2.05-S
Technical Data
Description Item no.
(high-strength cable gland)
Item no.
(circular plug-in connector)
Speed range min-1
Number Nominal of poles voltage
Nominal power output kW (S6-40%)
Nominal speed min-1
Continuous output S1 kW
ConcentriRecommended Weight kg city converter 1/100 mm
MAH 2.05-S MAW 2.05-SD
477505 1124 477505 1224
477505 3124 477505 3224
300-24,000 300-24,000
2 2
3 x 210 V 3 x 210 V
0.50 0.50
18,000 18,000
0.30 0.30
2.0 2.0
4.0 4.0
F5 upon request F5 upon request
Collets 3 mm are included in the spindle's scope of delivery
Main Spindle Drive
Description Item no..
Main Spindle Drive
Description Item no.
Main spindle drive HSAH 2.05-SF
310705 1511
Main spindle drive HSAW 2.05-SDF
310705 2511
The scope of delivery includes: spindle motor MAH 2.05-S frequency converter F5 connecting line converter-motor (length = 8 m) hook spanner (width = 16-20) wrench (SW 13) collets (diameter = 3 mm) box nut
The scope of delivery includes: spindle motor MAW 2.05-SD frequency converter F5 connecting line converter-motor (length = 8 m) throttle connecting panel collets (diameter = 3 mm) maintenance unit with pressure control air hose turn screws
E24
SYSTEMS
Main Spindle Drives
Accessory
Main Spindle Drives
Main Spindle Drives - Asynchronous
Spindle Motor
MA 4.05-SF
HSA 2.10-SF HSA 4.05-SF
systems
Nominal power output 1000 / 400 W * Speed range 300...24,000 min-1 / 200...6,000 min-1 * Nominal torque 1.5 / 3.0 Nm * Tool changing manually with collets Overall size 63 * In each case, the first value applies for MA 2.10-S
and the second value for MA 4.05-S
MA 2.10-SF
Technical Data
Description Item no.
(high-strength cable gland)
Item no.
(circular plug-in connector)
Speed range min-1
Number Nominal of poles voltage
Nominal power output kW (S6-40%)
Nominal speed min-1
Continuous output S1 kW
ConcentriRecommended Weight kg city converter 1/100 mm
MA 2.10-S MA 4.05-S
477605 1124 477605 1106
477605 3114 477605 3106
300-24,000 200-6,000
2 4
3 x 200 V 3 x 210 V
1.00 0.40
4,500 1,270
0.58 0.36
2.0 2.0
5.8 5.8
F5 upon request F5 upon request
Collets 6 mm are included in the spindle's scope of delivery
Main Spindle Drive
Description Item no.
Main Spindle Drive
Description Item no.
Main spindle drive HSA 2.05-SF
310706 1511
Main spindle drive HSA 4.05-SF
310706 1512
The scope of delivery includes: spindle motor MA 2.10-S frequency converter F5 connecting line converter-motor (length = 8 m) hook spanner (width = 16-20) wrench (SW-13) collets (diameter = 6 mm) box nut
The scope of delivery includes: spindle motor MA 4.05-S frequency converter F5 connecting line converter-motor (length = 8 m) hook spanner (width = 16-20) wrench (SW-13) collets (diameter = 6 mm) box nut
Main Spindle Drives
SYSTEMS
E25
Main Spindle Drives
Accessory
systems
MainSpindleDrives-Asynchronous
Spindle Motor
MAW 2.11-K
HSA 2.11-SF HSAW 2.11-KF HSA 4.11-SF
Nominal power output 1,100 W Speed range 300...15,000 min-1 / 200...7,500 min-1 * Nominal torque 2.8 / 8.0 Nm * Tool changing manually with collets (-S) and/or automatically (-K) Overall size 71 * In each case, the first value applies for MA 2.11-S/MAW 2.11-K
MA 2.11-S MA 4.11-S
and the second value for MA 4.11-S
Technical Data
Description Item no.
(high-strength cable gland)
Item no.
(circular plug-in connector)
Speed range min-1
Number of poles
Nominal voltage
Nominal Nominal Continuous ConcentriWeight power output speed output S1 city kg kW (S 6-40%) min-1 kW 1/100 mm
Tool holder K=collets holder (SK 20) S=collets
Recommended converter
MA MA
2.11-S 4.11-S
477711 1113 477711 3113 300-15,000 477711 1106 477711 3106 200-7,500
2 4 2
3 x 210 V 3 x 210 V 3 x 210 V
1.1 1.1 1.1
4,200 2,250 4,200
0.75 0.75 0.75
2.0 2.0 2.0
11.0 11.0 11.0
S (ø 3-10 mm)*1 F5 upon request S (ø 3-10 mm)*1 F5 upon request K (ø 3-12.7 mm)*2 F5 upon request
MAW 2.11-K
477711 1313 477711 3313 300-15,000
*1 Collets 6 mm are included in the spindle's scope of delivery *2 Collets holder SK 20 with collets 6 mm is included in the spindle's scope of delivery
Main Spindle Drive
Description Item no.
Main Spindle Drive
Description Item no.
Main spindle drive HSA 2.11-SF Main spindle drive HSA 4.11-SF
310711 1511 310711 1512
Main spindle drive HSAW 2.11-KF Main spindle drive HSAW 4.11-KF
310711 3511 310711 3512
The scope of delivery includes: spindle motor MA 2.11-S / MA 4.11-S frequency converter F5 connecting line converter-motor (length = 8 m) hook spanner wrench collets (diameter = 6 mm) box nut
The scope of delivery includes: spindle motor MAH 2.11-KF frequency converter F5 connecting line converter-motor (length = 8 m) throttle maintenance unit connecting panel air hose hook spanner wrench collets (diameter = 6 mm) collets holder
E26
SYSTEMS
Main Spindle Drives
Accessory
Main Spindle Drives
MainSpindleDrives-Asynchronous
Spindle Motor
MAW 2.22-K MAW 4.22-K
HSA 2.22-SF HSAW 2.22-KF HSA 4.22-SF HSAW 4.22-KF HSAW 3.00-K
systems
Nominal power output 2,200 W Speed range 300...15,000 min-1 / 200...7,500 min-1 * Nominal torque 7.5 / 15.1 Nm * Tool changing manually with collets (-S) and/or automatically (-K) Overall size 80 * In each case, the first value applies for MA 2.22-S/MAW 2.22-K
MA 2.22-S MA 4.22-S
and the second value for MA 4.22-S/MAW 4.22-K
Technical Data
Description Item no.
(high-strength cable gland)
Item no.
(circular plug-in connector)
Speed range min-1
Number of poles
Nominal voltage
Nominal power output kW (S6-40%)
Nominal Continuous ConcentriWeight speed output S1 city kg min-1 kW 1/100 mm
Tool holder K=collets holder (SK 20) S=collets
Recommended converter
MA MA
2.22-S 477822 1113 477822 3113 300-15,000 4.22-S 477822 1107 477822 3107 200-7,500
2 4 2 4 2
3 x 400 V 3 x 400 V 3 x 400 V 3 x 400 V 3 x 400 V
2.2 2.2 2.2 2.2 3.0
4,500 2,250 4,500 2,250 6,000
1.5 1.5 1.5 1.5 2.0
2.0 2.0 2.0 2.0 2.0
18.0 18.0
S (ø3-12.7 mm)*1 F5 upon request S (ø3-12.7 mm)*1 F5 upon request
MAW 2.22-K MAW 4.22-K MAW 3.00-K
477822 1313 477822 3313 300-15,000 477822 1307 477822 3307 200-7,500
18.0 K (ø 3-12.7 mm)*2 F5 upon request 18.0 K (ø 3-12.7 mm)*2 F5 upon request 18.0 K (ø 3-12.7 mm)*2 F5 upon request
477830 1320 477830 3320 300-20,000
*1 Collets 6 mm are included in the spindle's scope of delivery *2 Collets holder SK 20 with collets 6 mm is included in the spindle's scope of delivery
Main Spindle Drive
Description Item no.
Main Spindle Drive
Description Item no.
Main spindle drive HSA 2.22-SF Main spindle drive HSA 4.22-SF
310722 1511 310722 1512
Main spindle drive HSAW 2.22-KF Main spindle drive HSAW 4.22-KF Main spindle drive HSAW 3.00-K
310722 3511 310722 3512 310730 3611
The scope of delivery includes: spindle motor MA 2.22-S / MA 4.22-S frequency converter F5 connecting line converter-motor (length = 8 m) hook spanner wrench collets (diameter = 6 mm) box nut The scope of delivery includes: spindle motor MAW 2.22-K / MAW 4.22-K / MAW 3.00-K frequency converter connecting line converter-motor (length = 8 m) throttle maintenance unit connecting panell air hose hook spanner wrench collets (diameter = 6 mm) collets holder
Main Spindle Drives
SYSTEMS
E27
Main Spindle Drives
Accessory
systems
Main Spindle Drives - Accessory
Universal Milling/Drilling Motors
UFM 500 UFM 1050
UFM 500 Input power 500 W Output power 345 W Torque 0.14 Nm UFM 1050 Input power 1050 W Output power 720 W Torque 0.32 Nm
UFM 500
UFM 1050
Technical Data
Item no. Load speed min-1 Degree of Voltage efficiency V % Input power W Output power W Torque Nm
Clamping Blocks
Clamping blocks Item no.
Fixings Ra 100 and Ra 150 mm Fixing Ra 100 mm
290 902 290 903 290 904
UFM 500 UFM 1050 UFM 500-11 UFM 1050-11
420003 0500 22,600 420003 1050 21,000 420003 0501 22,600 420003 1051 21,000
230 230 115 115
68 71 68 71
500 1050 500 1050
345 720 345 720
0.14 0.32 0.14 0.32
Fixing Ra 125 mm
Tool-Changing Station for HSAW Spindle Motors
Scope of Delivery: pneumatic connecting panel hose, 3 m tool-changing station (without collets holder)
Tool-changing station Item no.
Tool-changing station x4 Tool-changing station x5 Tool-changing station x10
Collets holding individually
239011 0040 239011 0050 239011 0100
Item no.
SK 20 (collets 3-10 mm) SK 20 (collets 3-12.7 mm)
239122 239122 9000
Direct tool changer for HSAW 2.05-SDF upon request
E28 SYSTEMS Main Spindle Drives
Accessory
Main Spindle Drives
Main Spindle Drives - Accessory
Collets -S
MAH 2.05-S, MA 2.05-S, MA 4.05-S
Ø (mm) Item no.
systems
MA 2.11-S, MA 4.11-S
Ø (mm) Item no.
MA 2.22-S, MA 4.22-S
Ø (mm) Item no.
1.0 1.5 2.0 2.5 3.0 3.175 (1/8“) 3.5 4.0 4.5 5.0 5.08 (1/5“) 5.5 6.0 6.35 (1/4“)
239110 1000 239110 1500 239110 2000 239110 2500 239110 3000 239110 3175 239110 3500 239110 4000 239110 4500 239110 5000 239110 5080 239110 5500 239110 6000 239110 6350
3.0 3.175 (1/8“) 4.0 5.0 6.0 8.0 10.0
239120 3000 239120 3175 239120 4000 239120 5000 239120 6000 239120 8000 239120 0100
3.0 3.175 (1/8“) 4.0 5.0 6.0 8.0 10.0 12.0 12.7
239115 3000 239115 3175 239115 4000 239115 5000 239115 6000 239115 8000 239115 0100 239115 0120 239115 0127
Collets -SD
MAW 2.05-SD
Ø (mm) Item no.
Collets for Collets Holder SK 20 / SK 30
collets Holder Item no. 239122
Ø (mm) Item no.
collets Holder Item no. 239122 9000
Ø (mm) Item no.
collets Holder Item no. 239130
Ø (mm) Item no.
3.0 3.175 (1/8“) 6.0 6.35 (1/4“)
239140 3000 239140 3175 239140 6000 239140 6350
3.0 3.175 (1/8“) 4.0 5.0 6.0 8.0 10.0
239120 3000 239120 3175 239120 4000 239120 5000 239120 6000 239120 8000 239120 0100
3.0 3.175 (1/8“) 4.0 5.0 6.0 8.0 10.0 12.0 12.7
239115 3000 239115 3175 239115 4000 239115 5000 239115 6000 239115 8000 239115 0100 239115 0120 239115 0127
3.0 3.175 (1/8“) 4.0 5.0 6.0 6.35 (1/4“) 8.0 10.0 12.0 12.7 16.0
239130 3000 239130 3175 239130 4000 239130 5000 239130 6000 239130 6350 239130 8000 239130 0100 239130 0120 239130 0127 239130 0160
Main Spindle Drives
SYSTEMS
E29
CNC Base Units
Accessory
systems
1
With VakuFit it could hardly be simpler General
The isel VakuFit clamping system solves clamping problems easy and quickly. It can be used on all T-groove plates and does not depend on rasters. All isel maschines can be upgraded and backfitted with this vacuum clamping technology in a very costsaving way. It can also interact with different clamping technologies of all kinds. It is recommended to use an injection pump to create the vacuum. The pump is maintenance free and uses regular compressed air between 4 and 8 bar. The Time between applying and clamping of a part is less than 2 seconds (up to 85 % vacuum). Two different vacuum pumps are provided. One pump has an energy saving function, wich stops the compressed air supply on an optionally adjusted vacuum, so that it only uses air for about 5 seconds per clamping procedure. The second pump is without any further functions. It has a permanent air consumption. Both provide a vacuum of approximately 85 %. The pump with the energy saving function also contains a blow off function for a quick loosening of parts and a vacuum monitor. This pump is especially qualified for professional applications. The basic pump without any further functions is qualified for conditions of short-term applications while it is consuming compressed air permanently. isel offers basically two basic versions for the VakuFit clamping system - as you can see adjoining. The isel VakuFit clamping system solves almost every clamping task on isel machines and devices for an especially favourable price/performance ratio.
The VakuFit version containing the isel T-groove hollow chamber profile is additionally equipped with M8 rivets in 50 or 100 mm rasters.
With this version the material can be clamped to the plate without a suction device. This way thin work pieces won’t be bent unwantedly.
The Vacuum Clamping System for Initial Equipment and Backfitting
The second and very flexible VakuFit version for all isel T-groove profiles is connected with the suction devices and air supply
through tubes with 4 mm diameter. The suction devices can be moved within the T-groove without depending on rasters.
E30
SYSTEMS
CNC Base Units
Accessory
CNC Base Units
systems
1
Order Information System Layout
T-slot plate with vakuum suckers, pattern-independant, with flexible hoses
Spiral hose
4 mm T-nut block
Vakuum oval suction set
with M6 connection, tube connections, tube, Slot nuts, packing unit 6 pcs.
isel vacuum sucker
Item no.: 216600 0013
Vacuum hollow profile with T-nuts in a 50 mm or 100 mm pattern Steel rivet M8
Vakuum oval suction set
with M8 banjo bolt for VakuFit clamping plate, packing unit 6 pcs. (no Image)
isel vacuum sucker
Item no.: 216600 0014
Vacuum gauge Vacuum pump with energy saving system and deflating system Stop valve Vacuum filter
Hose,
6 mm
Pressure gauge
Filter
Pneumatic vacuum pump with energy saving system
incl. vacuum gauge, compressed air regulator, maintenance unit with filter, tube, vacuum filter
Vacuum pump without energy saving system and deflating system
Item no.: 216600 0008
VakuFit clamping plates
250 x 40 mm with screw plugs, sealing rings, profile locking plate and air supply
VakuFit sealing rings
made of caoutchouc, self-adhesive packing unit 60 pcs.
Item no.: 216600 0020 VakuFit lay-on plates
made of caoutchouc, self-adhesive packing unit 60 pcs.
Item no.: 216610 0250
(Length 250 mm)
Pneumatic vacuum pump incl. vacuum gauge,
compressed air regulator, maintenance unit with filter, tube, vacuum filter
Item no.: 216610 0500
(Length 500 mm)
Item no.: 216600 0022 VakuFit sealing plates
made of caoutchouc, self-adhesive packing unit 60 pcs.
Item no.: 216610 1000
(Length 1000 mm)
Item no.: 216610 1500
(Length 1500 mm) different length up to 3000 mm and different widths on request
Item no.: 216600 0009
Item no.: 216600 0021
CNC Base Units
SYSTEMS
E31
Wafer Handling Components
systems
Automation Components for the Semiconductor Industry
E32
SYSTEMS
Wafer Handling Components
Wafer Handling Components
systems
Automation Components for the Semiconductor Industry
Based on the competency of iselautomation GmbH & Co. KG iselROBOTIK offers automation components and peripheral equipment for the semiconductor industry as follows: • Wafer handler in different sizes and types • Prealigner, for example as standalone systems • Linear tracks with different drive conceptions and procedures • Miscellaneous accessory like end effectors, mapping sensors • Special kinematics and many others. Please feel free to approach us we would be glad to make an appointment to give you further details or to send you detailed information about this range of products.
Wafer Handling Robots Special Kinematics
IEE Series
Key Features
• Innovative All-In-One designs • Excellent structural rigitidy Linear Tracks • Modular construction • High throughput • Maximum reliability and precision • Real time motion control • Brushless, maintenance free servo motors with low inertia • Various communication interfaces • Class 1 clean room compatible
Prealigners
www.iselrobotik.com
Wafer Handling Components SYSTEMS E33