Upgrade Note from V3-0-52 to V3-3-3348
Step 1- Uninstall all old Device Manager and install V22.214.171.124 Device Manger.
Step 2- Plug 200C/N cable device and turn it on. Check the device’s version 3-0-3052.
Step 3- Read PIB from device and check the device’s MAC be read in utility.
During the PIB read the utility will display “does not match the target.” and don’t care
about it. Just click “OK” to continue.
Check the device’s MAC be read in utility
Step 4- Load Firmware and PIB from computer and start to reprogram the firmware.
Go to correct the firmware directory and select “int6000-v3.3.4-0-8-B-Final.nvm.
During the firmware selection the utility will display “does not match the running
SDRAM type” and don’t care about it. Just click “OK” to continue.
Go to correct the PIB directory and select
The utility is processing the firmware upgraded and wait until the correct version
(V3-3-3348) to be displayed.
Step 5- The V3-3-3348 firmware is upgraded successfully and check it as below.
After the version upgraded, you can set the device to master or slave mode by MDC