Docstoc

Experiment

Document Sample
Experiment Powered By Docstoc
					S.No   St.       Name of Items                              TECHNICAL SPECIFICATION                           Qty.
  .    list                                                                                                   Req.
       No.
  1. 25       Servo              The equipment should be designed to achieve stable require supply.         01No.
              Operated           Rating 5 kVA – Single Phase & 10 kVA – Single Phase
              AC Voltage         Input                            : 170 V AC – 270 V AC
              Stabilizer ,       Output                  : 230 V AC + 1% Adj.
              10                 Frequency                        : 47 – 51 Hz
              KVA(Servo)         Phase                            : single
                                 Winding                          : Copper wound
                                 Cooling                 : Air Cooled
                                 Correction                        36 Volt/ sec
                                 Line Regulation         : + 1%
                                 Load Regulation         : + 1%
                                 Over Load Capacity               : 120 % for 1 minutes
                                 Metering                         : Voltmeter with Input and Output
                                 selector switch
                                 Indicating Lamps                 : Power On, High/ Low Voltage
                                 Indication
                                 Protection                       : Visual warning with LED’s for very
                                 high/ low                                        input voltage, and Over
                                 load protection.
                                 Waveform distortion              : zero
  2.    37 Quantity                                                                                         02 Nos.
           Flow Meter            Tank Size                :300 (B)* 300 (W) * 600 (H) mm
           (Simple               MOC                       : SS-304
           Tank Type             Housing                    : metal cover with front transparent.
           Quantity              Gauge Glass               :Heavy Walled Borosilicate 16 mm OD
           Meter)                Scale                    :marked linearly for level values in mm/ cm
                                 Isolating Valve, Drain Valve ½” Size, SS 304
                                 Suitable stand of MS to support the tank.
3.   38 Reciprocating     piston Max.cont.pressure-4 bar                                                                    4 Nos.
        type flow meter          Max.intermittent pressure.-6 bar
                                 Static case pressure-6 bar
                                 Fluid viscosity range- 0.3 to 1000cps
                                 Speed range – 0 – 1500 rpm
                                 Motor type – typically stepper motor
4.   70 Logic Gate trainer       The trainer on basic electronics is intended for elementary as well as advance             2 Nos.
                                 training of digital electronics. The trainer should cover regular digital circuits by
                                 solder less inter connections through use of 2 mm brass terminations and patch
                                 cords. Various clock generators, logic level input / output indicators and DC
                                 regulated power supply should be in built. The unit should be housed in a powder
                                 coated metal enclosure with provision for safe keeping of mains cord, patch cords
                                 and top lid for protection during storage. Also CAT software with animations should
                                 be provided. The software should cover digital electronic concepts from gates to
                                 design issues and should be able to be used as a reference and should contain
                                 designs of common electronic circuits and K maps. It should have over 350
                                 animations with an in built dictionary of over 250 words and also have down loading
                                 and printing options with voice / sound overlay.
                                 The trainer should cover the following :

                                      Study of basic gates and verification of their truth tables (NOT, OR, AND, NOR,
                                       NAND, EX-OR, EX-NOR).
                                      Study and verifications of the law of Boolean algebra and De-Morgan's
                                       Theorems.
                                      Study of important TTL terminologies. Verification of important TTL Circuit
                                       Parameter.
                                      Construction and verification of various types of flip - flops using gates     and
                                       IC'S (RS, JK, D,T, M/SJK).
                                      Construction and verification of various types of combinational circuits such as
                                       Half Adder, Full Adder, Half Subtractor, full subtractor, Even/Odd parity checker,
                                       Multipliexer, Demultiplexer, Binary to gray and gray to binary converters.
                                      Construction and verification of various types of Up / Down,
                                       Synchronous/Asynchronous, Riple Reverse, Ring, Binary BCD & Decade Counters.
                                      Construction and verification of 4 Bit Universal shift Register (SR/SL operation).
   Study of 7 segment display and decoder/driver.
   Many other experiments should be possible using the onboard components and
    Special Vero board Provided. (For use of external components without
    soldering).
The software should cover :

1.      Basic concepts of digital electronics.
2.      Number systems, binary logic and logic gates.
3.      Design issues for sequential and combinational logics.
4.      Design, operation and applications of flip - flops.
5.      Analog to digital and digital to analog converters.
6.      Internal architecture of semi conductor memories.
7.      Programming PLA and PLA.
8.      Simulator for number conversion.
9.      K - map simulation.
10.     Gate implementation process.
11.     Converter design principles.

DC Power supply                  : 5 V / 500 mA (IC based regulated output)
Clock Generators                 : i. Fixed: a. 0.1 Hz B.1Hz (Simultaneous TTL, 5V)
                                 independent outputs).
                                           ii. Variable: One low frequency variable
clock generator.
Manual Pulser            : One independent buffered bounce less manual pulser.

(Useful for freezing the Action of each stage of counter after every clock pulse).

Logic Level Inputs                 : Eight independent buffered logic level inputs to
Select                             High/ Low TTL Levels, Each with a LED to indicate
high /                             low Status and termination.
Logic Level Indicators   : Eight independent buffered logic level indicators for
                                   High / Low status indication of digital output.
Vero board                         :Unique Vero board types socket with termination
for use                            of External Components /IC'S up to 20 pin without
                                                                      soldering.
                             Potentiometer           : One potentiometer (100K) with terminations.
                             Power On                          : Power on switch with indicator for mains on
                             indication                               and fuse for protection.
                             Patch Cords (Stackable) : Set of 20 assorted colored multi-strand wires with 2 mm
                                                              Stackable plug Termination at both ends.
                             Power Requirement                : 230 V ± 10% single phase AC.
                             Software                         :One CAT Software package workable on
                             windows95and                             above.
                             Instruction Manual               : One detailed instruction manual with well
                             throughout                               Experiments covering the above topics.
5.   39 Impeller type flow        Material of     External Housing is a two-part, 6-bolt, Flanged Stainless Steel   4Nos.
        meter                    Construction: Casting. Internal Mechanism is constructed of high tech
                                                  polymers for high chemical/abrasion resistance.
                                   Electrical:    Optional Reed Switch Pulse Register also available for remote
                                                  Totalization.
                                  Flow Range:     Low Range: 68-172 BPD (approx. 2-5 gpm)
                                                  Mid Range: 172-1543 BPD (approx. 5-45 gpm)
                                                  High Range: 1543-3086 BPD (approx. 45-90 gpm)
                                   Accuracy:      ±2% of Reading
                                Pressure Rating: 5000 PSI Operating Pressure Max.
                                   Operating
                                                  +30° to +200° F.
                                 Temperature:
                                 Connections:     1" NPT Female and 2" NPT male
                              Overall Dimensions: 8.50" Length x 6.0" Width x 7.75" Height
                                    Weight:       Approximately 28 lbs.
6.   71 Digital Power Supply The Digital power supply trainer should be housed in a powder coated metal cabinet 1No.
        Trainer              / enclosure with provision for safe keeping of mains cord, patch cords and top lid for
        (Half Wave           protection during storage. A well spread circuit / block layout should be provided on
        Rectifier/Full Wave  the front panel module. All the necessary component / circuits required for the
        Rectifier)           experiments should be provided on the panels of various modules. The trainer
                             should cover all the circuits by solder less inter connections through use of 2 mm
                             brass terminations & patch cords. Various necessary AC, DC regulated power
                             supplies & generators should be in built. Each module should work on 230 V AC
mains.

A simulation software with over 70 major experiment should be provided to be used
with IBM PC at or compatible with CD-ROM drive and 20MB HDD free, 32 KB RAM
colour monitor with 800 x 600 pixels 16 bit hi colour & windows platform. The
software should provide voice / sound overlay with real - looking components for
experimentation. The software should consist of experiments with dedicated circuits
for each experiment. The circuit should be pre - wired. Various virtual test &
necessary instruments such as: Dual beam C.R.O., Ammeter, Digital Multimeter,

Regulated Power Supply ( Variable / fixed ), Audio generator / Function generator
should be in built. The same should automatically appear in the selected circuit as
per requirement and only the ranges needed should automatically be selected,
saving the time of wiring / connections and avoiding wrong connections. Also certain
variable values in passive components should be selectable so that its effects can be
studies.

 All the experiments provided, should include theory, aim, apparatus required,
procedure, observation table, formulas & graphs. Bode plot facility should also be
available wherever necessary. The software should cover experiments on rectifiers,
clippers, clampers, multipliers, RLC, basic / advanced transistor circuits, Zener
Diodes, Self test feature should be in-built.
The complete trainer modules should be able to actually perform the following
experiments on :


            Study and verify the RC, RL & RLC series & parallel resonance
             circuits, filters ( LP, HP, BP, BR ).
            Study & verify the clipping, clamping, biased clippers, half
              wave, full wave & bridge rectifier circuits.
            Study and verify the voltage regulators circuits using
             zener diodes & transistors.
                                   Should have facility to perform many other experiments using
                                     the onboard components and a special Vero board
                                     should be provided. (for use of external components without
                                    soldering ).
                         All necessary components / circuits to perform the above experiments should be
                         inbuilt and a detailed instruction manual should be provided.

                          IC based DC Reg.    a.      + 12 V / 500 mA ( fixed and with facility to vary from
                          Power Supplies               0 to +12 V ).
                                              b.      - 12 V / 500 mA ( fixed and with facility to vary from
                                                       0 to -12 V ).
                                              c.      + 5V / 500mA ( fixed ).
                          AC Supplies         9 - 0 - 9 V AC / 500 mA.
                          Vero board          Unique Vero board type socket with termination for use of
                                               external components / IC’s up to 20 pin without soldering.
                          Generator           Necessary variable audio generator & carrier generator should
                                              be provided.
                          Continuity Tester   Provided with audio / visual indication.
                          Power ON            Power ON switch with indicator for mains on indication and
                                               fuse for protection.
                          Patch Cords         Set of 25 assorted coloured multi-stand wires with 2mm
                          ( Stackable )       stackable plug termination at both ends
                          Power               230V + 10% single phase AC.
                          Requirement
                          Software            One software package workable on Windows 95 and above.
                          Instruction         One detailed instruction manual with well thought out
                          Manual              experiments covering the above topics of over 150 pages
                                              should be provided.
7.   12 Diaphragm pump   Suction size                     1.5in                                                1No.
                         Discharge size                   1.5in
                         Air inlet size                   1/2in
                                 Suction lift                      5m
                                 Max.air pressure                  7bar
                                 Max.flow                          3401/min
                                 Max.head                           70m
                                 Max.grain diameter                5mm
                                 Weight                            15.2~38.6kg
                                 Material of Body                  PP. acetal. PVDF, AL. SST.CI
8.    13 Magnetic      Coupling Inlet                            : 18 mm hose                           1No.
         Pump                   Outlet                           :18 mm hose
                                Max. head                        : 3.5 m
                                Capacity                         :25 LPM
                                Operating voltage                : 230 V
9.    61 Strip Chart                                                                                    02 No.
         Recorder                 Input                   : mA
                                  No. of Input            : 6 - multipoint
                                  Input Sampling : 10s/ 6 ch, Max.
                                  Accuracy                : + 0.2 % +1 Digit max.
                                  Chart                   : width folded, 16 m length, 114 mm width
                                  Chart Speed              : Selectable in range of 1 – 1500mm/hr
                                  Display        : for channel number, process parameter
                                  Power Supply : 230 V AC, 50 Hz
10.   62 Secondary Devices For                                                                          02 No.
         Measurement Of           Secondary Devices For Measurement Of Temperature---Rtd Pt 100
         Temperature , Pressure   Steam Dia              : 8 MM
         Level And Flow For       Length         : 200 mm
         Above Recorder           with head mounted transmitter.
                                  I/P                    : RTD
                                  O/P                    : 4-20 mA
                                  supply voltage : 24 V DC

                                  Secondary Devices For Measurement Of Pressure-Pressure Transimitter
                                  Range                   : 0 to 5 bar
                                  supply voltage : 24 v dc
                           connection             : ½” or ¼” bsp thread
                           Principal              : Piezo – Resistive.
                           Diaphragm              : S.S
                           O/P                    : 4 -20 mA


                           Secondary Devices For Measurement Of Flow-D.P Transimitter

                           Range                  : 0 - 1250 mm WC
                           Ambient Temp. : Up to 70 deg C
                           Power Supply : 24 V DC
                           Output        : 4-20 mA DC
                           Conduit Connection     : ½” / ¼” NPT
                           Diaphragm Material     : Stainless Steel

                           Secondary Devices For Measurement Of Level-Level Transimitter
                           Service          : Water
                           Measuring Principle      : Piezo Resistive
                           Supply           : 24 V DC
                           Output           : 4-20 mA DC
                           Connection               : ½” / ¼”
                           Diaphragm Material       : Stainless Steel
                           Range            : 0-1000 mm wc
11.   40 Bellows                   Dial Size                 : 150 mm                       2Nos.
         type Gas                  Range            : 0 kg/ cm2 to 7 kg/ cm2 , Dual scale
         flow Meter                Accuracy                  :1%
                                   Sensing Element           : SS 316
                                   Top & Bottom
                                   Chamber                   : SS 316
                                   Movement Case             : SS 304
                           Mounting                 : ½” BSP(M), Bottom
12.   66 PNEUMATIC                                                                          02 No.
         CONTROLLERS FOR   PNEUMATIC PRESSURE CONTROL TRAINER :
         PRESSURE, FLOW,
TEMPERATURE, AND   TECHNICAL SPECIFICATIONS :
LEVEL WITH
ASSOCIATED                 Pneumatic Pressure Transmitter:
EQUIPMENTS.                      Measuring Principle              : Pneumatic
                                 Air Supply                       : 1.4 Kg/cm2
                                 Output                  : 0.2 – 1.0 Kg/cm2
                                 Diaphragm Material               : Stainless Steel
                                 Operating                        : As per System

                           Pneumatic PID Controller:
                                 Input                              : 0.2 – 1.0 Kg/cm2
                                 Output                    : 0.2 – 1.0 Kg/cm2
                                 Range                              : 0 – 100 %
                                 Scale                              : For Set Point & Process
                                 Control Mode              :P+I+D
                                 Control Action            : Direct / Reverse (Field Selectable)
                                 Accuracy                           : Better than 3%
                                 Repeatability                      : Better than 0.6 %
                                 Max Air Supply            : 30 Psi
                                 Process Connection                 : ¼” NPT
                                 Air Connection            : ¼” NPT

                           Control Valve:
                                   Body Type                        : Globe Valve
                                   Nominal Size                     : 15 mm
                                   Stem Diameter           : 10 mm
                                   Characteristics         : Equal Percentage
                           Actuator:
                                   Fail Safe Action        : extends
                                   Bench Range             : 0.2-1.0 bar

                           Valve positioner :
                                   Positioner                      : Pneumatic type
        Pneumatic Circular Chart Recorder:
              Input                            : 3 – 15 psi
              Pen                              : Ball Point of Red Color
              Power                            : 220 V AC, 50 Hz
              Chart Speed                      : Rotation per Shift (8 hrs.)
              No. of Charts                     30 pics.

        Pressure Vessel:
                Housing                         : SS
                Service                 : Air
                Max. Pressure           : Upto 3 kg/cm2
                With Safety valve, Pressure Gauge mounted.

        Air Regulator:
                Service                : Air
                Max. Input Pressure            : 10 kg/ cm2
                Hose Connection                 : ¼”

        Air Compressor:
               Capacity                        : 2CFM
               Motor                           : 1 H.P ( 1 phase)
               Storage tank                    : 200 litre

        Manifold Valve:
               Connection                      : 3 way

PNEUMATIC FLOW CONTROL TRAINER:

TECHNICAL SPECIFICATIONS :

        Pneumatic Flow Transmitter:
              Measuring Principle               : Pneumatic
              Air Supply                        : 1.4 Kg/cm2
              Output                   : 0.2 – 1.0 Kg/cm2
            Diaphragm Material                   : Stainless Steel
            Operating                            : As per System

    Orifice Plate Assembly:
             Service                  : water
             Max. Temp.                          : 45 C
             Orifice Plate Material   : SS 304
             Orifice Plate Body                  : Stainless Steel
             Orifice Plate Type                  : Flange Type

    Pneumatic PID Controller:
          Input                                : 0.2 – 1.0 Kg/cm2
          Output                      : 0.2 – 1.0 Kg/cm2
          Range                                : 0 – 100 %
          Scale                                : For Set Point & Process
          Control Mode                :P+I+D
          Control Action              : Direct / Reverse ( Field Selectable )
          Accuracy                             : Better than 3%
          Repeatability                        : Better than 0.6%
          Max Air Supply              : 30 PSi
          Process Connection                   : ¼” NPT
          Air Connection              : ¼” NPT

Control Valve:
            Body Type                          : Globe Valve
            Nominal Size                       : 15 mm
            Stem Diameter             : 10 mm
            Characteristics           : Equal Percentage

    Actuator:
           Fail Safe Action           : extends
           Bench Range                : 0.2-1.0 bar

    Valve positioner:
        Positioner                       : Pneumatic type

Pneumatic Circular Chart Recorder:
      Input                              : 3 – 15 psi
      Pen                                : Ball Point of Red Color
      Power                              : 220 V AC, 50 Hz
      Chart Speed                        : Rotation per Shift (8 hrs.)
      No. of Charts                       30 pics.

Rotameter:
      Service                  : Water
      Range                             :Suitable
      Connection                        : ½”
      Metering Tube            : Borosilicate Glass
      Float                             : SS
      Valve                             : Needle type, integrated

Air Regulator:
        Service                : Air
        Max. Input Pressure              : 10 kg/ cm2
        Hose Connection                  : : ¼”

Sump Tank:
       Service                 : Water
       Capacity                          : 100 liters
       MOC                               : SS-304

Pump:
        Voltage                : 220 V AC
        Power                          : ½ HP
        MOC                            : SS 304 Body

Manifold valve :
       Connection                        : 3 way
PNEUMATIC LEVEL CONTROL TRAINER :

TECHNICAL SPECIFICATIONS:

        Pneumatic Transmitter:
              Measuring Principle           : Pneumatic
              Range                         : 0 – 800 mm WC
              Air Supply                    : 1.4 Kg/cm2
              Output                        : 0.2 – 1.0 Kg/cm2
              Conduit Connection            : ¼” (F) NPT
              Diaphragm Material            : Stainless Steel
              Mounting                      : pipe mounting
              Body material         : CS

        Pneumatic PID Controller:
              Input                          : 0.2 – 1.0 Kg/cm2
              Output                : 0.2 – 1.0 Kg/cm2
              Range                          : 0 – 100 %
              Scale                          : For Set Point & Process
              Control Mode          :P+I+D
              Control Action        : Direct / Reverse (Field Selectable)
              Accuracy                       : Better than 3%
              Repeatability                  : Better than 0.6 %
              Max Air Supply                 : 30 Psi
              Process Connection             : ¼” NPT
              Air Connection        : ¼” NPT

        Control Valve:
                Body Type                    : Globe Valve
                Nominal Size                 : 15 mm
                Stem Diameter       : 10 mm
                Packing             : PTFE
                Characteristics     : Equal Percentage
                Bonnet              : Standard
Actuator:
       Fail Safe Action        : extends
       Bench Range             : 0.2-1.0 bar

Valve positioner:
        Positioner                       : Pneumatic type

Pneumatic Circular Chart Recorder:
      Input                              : 3 – 15 psi
      Pen                                : Ball Point of Red Color
      Power                              : 220 V AC, 50 Hz
      Chart Speed                        : Rotation per Shift (8 hrs.)
      No. of Charts                      : 30 pics.

Rotameter:
      Service                  : Water
      Range                              : Suitable
      Connection                         : ½”
           METERING TUBE             : BOROSILICATE GLASS
      Float                              : SS
      Valve                              : Needle type, integrated

Sump Tank:
       Service                 : Water
       Capacity                          : 100 liters
       MOC                               : SS-304

Pump:
        Voltage                : 220 V AC
        Power                          : ½ HP
        MOC                            : SS 304 Body

Pressurized Tank:
                Service                 : Water
                Capacity                           : 30-40 liters minimum
                MOC                                : S.S
                Range                              : 0 –800 mm WC

        Air Regulator:
                Service                 : Air
                Max. Input Pressure                : 10 kg/ cm2
                Hose Connection                    : ¼”

        Manifold                                   :2 way or 3 way

     Air compressor :
            Capacity                  : 2CFM
            Motor                     : 1 H.P ( 1 phase)
            Storage tank              : 200 litre
PNEUMATIC TEMPERATURE CONTROL TRAINER :


TECHNICAL SPECIFICATIONS:

The setup should consist of insulated jacketed tank (5 liter, SS 304) heated with the
help of steam and the flow rate of the water can be measured with the help of a
rotameter. The temperature of the heated water should be sensed by temperature
bulb and steam should be controlled using pneumatic control valve to maintain the
temperature in the tank. The pneumatic temperature controller should act to vary
the flow of steam for controlling purpose. The heating tank should also consists of
stirrer and motor for uniform distribution of temperature in the tank.

Pneumatic PID Controller:
Range                  : 0 1000C
Output                 : 0.2 1.0 Kg/cm2
Type of thermal systems         : Mercury Filled
Ambient temperature compensation: Required
Max. Air Supply       : 30 psi
Action                        : Direct / Reverse (Field Selectable)
Process Connection            : 3/4” NPT
Thermo well                   : Required
Air Connection        : 1/4” NPT

Control Valve:
Service               : Steam
Nominal Size                 : 15 mm
Stem Diameter         : 10 mm
Packing               : PTFE

Actuator:
Fail Safe Action      : extends
Bench Range           : 0.2-1.0 bar

Rotameter:
Service               : Water
Range                          : Suitable
Connection                     : ½”
Metering Tube         : Borosilicate Glass
Float                          : SS
Valve                          : Needle type, integrated

Air Regulator:
Service               : Air
Max. Input Pressure              : 10 kg/ cm2
Hose Connection                  : ¼”


Sump Tank:
Service               : Water
Capacity                         : 50 liters
MOC                              : SS-304
                            Pump:
                                    Voltage         : 220 V AC
                                    Power                   : ½ HP
                                    MOC                     : SS Body

                            Steam Generator:
                                     Capacity                  : 20 litre (Approx.)
                                     Heater           : 2 Nos.
                                     M.O.C.           : SS 304 (Inner)
                                     M.O.C.           : SS 304 (Outer)
                                     Steam Generator should consist of safety valve, pressure gauge, pressure
                            relief valve, feed valve, drain valve, water level indicator, low water level cut-off
                            arrangement.

                            The unit will also consist of necessary piping, fittings and pneumatic connections
                            wherever necessary will           be provided. The setup will be mounted on stand.
13.   77 Vacuum Pump With                                                                                           02 Nos.
         Accessories        The vacuum pump should be oil – immersed, Rotary vane type pump. It should
                            have rotor with two spring loaded vanes, is mounted eccentric in the stator body.
                            Back air flow to be prevented by in-built NRV. All parts are to be of precisely
                            machined, ground and assembled with close tolerance. Standard accessories
                            should contain Moisture Trap, Inlet Dust Filter, and Vacuum Gauge with Regulator
                            etc. Suitable starter and belt guard should be provided.
                            No. of Stages            : One
                            Free Air Displacement : 50 LPM (1.8 CFM)
                            Drive Motor                       : 0.25 HP
                            Oil Filling                       : 2 liter Approx.
                            Pump RPM                          : 500
                            Motor RPM                         : 1440
                            Vacuum                            : Up to 760 mm of Hg( Depending an atm.
                            pressure)
                            Test Chamber             :
                            Chamber                           : 300 x 300 x 300 mm with vacuum inlet and outlet
                            valves, Vacuum                    gauge and bulb
                                Vacuum Tester        : Tesla
                                Whole set up mounted on suitable MS Structure
14.   78 Air                                                                                                      02 Nos.
         Compresso              1.0 HP Two Stage Reciprocating type Air Compressor with minimum 80 liters Storage
         r With all             Tank & intercooler (tested at 10 kg/ cm2) to provide about 2 CFM air @ 3 kg/ cm2
         accessories            along with accessories such as Pressure gauge, Spring loaded safety valve, drain
                                valve, intake air filter, Starter etc.
15.   79 Color                  36” LCD audio-video in & out                                                      01 No.
         monitor/T
         V
16.   80 IC Tester Liner With                                                                                          01 No.
         Accessories
                                                                 It should have 16 keys for its operation.
                                     It should have Six Seven Segment Display to show IC number, PASS & FAIL
                                      Status, Operations display.
                                                                 It should have Potential free 40 pin universal ZIF
                                                                  socket.
                                                                 It should have Automatic testing facility for
                                                                  variety of ICs
                                     It should test most of the 6 to 40 pin ICs in DIP package. The list should
                                      include 74/54, 40/45 Series, EPROMs, RAMs, Peripheral ICs, Microprocessor
                                      (8051/8085/Z80) etc.
                                                                 It should have Audio alarm for user.
                                                                 Instruction manual should be provided.
                                                                 It should works on 230V, + 10% single phase AC
                                                                  mains.
                                                                 The Digital IC Tester should support ( test ) the
                                                                  following digital IC’s :
                                      CMOS ICs (40 Series): 00 01 02 06 07 08 09 010 11 12 13 14 16 17 18 19 20
                                      21 22 23 24 25 26 27 28 29 30 32 33 34 35 38 40 41 42 43 44 47 48 49 50 51
                                      52 53 54 55 56 60 61 63 66 67 68 69 70 71 72 73 75 76 77 78 81 82 85 86 89
                                      93 94 95 96 97 98 99 101 102 103 106 107 109 110 147 160 161 162 163 174
                                      175 192 193 194 195
                                     CMOS ICs (MC140) MC140 CMOS ICs (45 Series): 01 02 03 06 08 10 11 12 13
                                     14 15 16 18 19 20 29 30 31 32 37 38 39 41 43 44 47 51 55 56 58 59 60 61 72
                                     81 82 84 85 99 CMOS MC MC145 TTL 74/54 Series : 00 01 02 03 04 05 06 07
                                     08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33
                                     34 35 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 53 54 55 58 60 63 64 65
                                     68 69 70 72 73 74 75 76 77 78 80 82 83 85 86 89 90 91 92 93 94 95 96 100
                                     104 105 107 109 110 111 112 113 114 116 121 122 123 125 126 128 131 132
                                     133 134 135 136 137 138 139 140 141 142 145 147 148 150 151 152 153 154
                                     155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 173 174
                                     175 176 177 178 179 180 181 182 183 184 185 189 190 191 192 193 194 195
                                     196 197 198 199 211 213 219 226 230 231 237 238 239 240 241 242 243 244
                                     245 246 247 248 249 251 253 255 256 257 258 259 260 261 265 266 273 274
                                     276 278 279 280 283 284 285 289 290 293 295 298 299 319 322 323 347 348
                                     350 351 352 353 354 356 363 364 365 366 367 368 373 374 375 376 377 378
                                     379 381 382 386 388 390 393 395 396 398 399 425 426 440 441 442 443 444
                                     445 447 465 466 467 468 490 502 503 518 519 520 521 522 533 534 537 538
                                     539 540 541 542 543 544 545 563 564 568 569 573 574 575 576 577 580 588
                                     589 590 594 597 604 605 620 621 622 623 638 639 640 641 642 643 644 645
                                     646 647 648 651 652 653 654 655 656 657 658 659 664 665 668 669 670 674
                                     675 676 677 678 679 680 682 683 684 685 686 687 688 689 700 730 731 734
                                     795 796 797 798 804 805 808 821 822 823 824 825 826 832 841 842 843 844
                                     845 846 990 991 992 993 994 995 996
                                     75/55 Series : 107 108 113 121 122 123 124 125 127 128 129 136 138 151
                                     153 159 158 160 172 173 174 175 176 177 178 183 189 401 402 403 404 411
                                     412 413 414 416 417 418 419 430 431 432 433 434 437 446 447 448 449 450
                                     451 452 453 454 455 470 471 472 473 474 491 492 496 497 498
                                     Microprocessor, EPROM, RAM and other digital Ics : 8255 8155 8156 8253
                                     8254 8226 8031 8051 8052 8032 8035 8039 8048 8049 8259 8279 8751 8752
                                     8749 2716 2732 2764 27128 27256 27512 2864 2817 2816 62256 2114 6116
                                     6264
17.   81 Air Vacuum Chamber                                                                                         01 No.
                              Double walled made of thick inner chamber of SS and thick MS exterior duly painted,
                              proper insulation of glass wool. SS studs on door for high vacuum and temperature
                                    indicator and controller. Vacuum gauge with max. Vacuum up to 30 Hg. Round
                                    chamber with size 12” * 15”.
18.   82 Static Electricity Guard                                                                                         1x16

                                    Action Bars:
                                    Static Charge Neutralising Rods No Spark No Shock Type Mounted on a Table.
                                    The Rods should be completely moulded by Epoxy of 30 KV Insulation.
                                    The external housing of Rods should be in S.S.Length of the rods should be 450 mm.

                                    High Voltage Generator:

                                    Input                                       : 230 Volts Single Phase 50 Hz.
                                    Output                                      : 7500 Volts
                                    Current                                     : Max 200 mA

                                    Static charge Meter:

                                    Type                                        : Analogue
                                    Range                                       : 2.5 KV both negative and positive at
                                    2.5 cm
                                                                                5 KV both negative and positive at 5 cm
19.   13 Lovibond                                                                                                         2 No.
         Comparato                  Lovibond comparator to visualize colour with match glass in test disk
         r                          with nesslenser to view long path length.

20.   16 Spectropho                     Range                      : 340 to 990 nm                                        2 No.
         tometer                        Accuracy                   : + or - 2 nm
                                        Read out                   : 31/2 digit, 1 nm step
              Wavelength                Bandwidth           : 5.0 nm

                                        Photometric
                                        Range                       : 0.0 to 2.000 Abs
                                        Accuracy                    : + or - 0.005 Abs at 1.0 A
                                        Resolution          : 0.1 % T, 0.001 Abs
                                      Read out                   : 31/2 digit LED
                                      Grating                    : 600 lines /mm
                                      Source                     : Tungsten Halogen Lamp 12 V, 50 w
                                      Detector                   : Silicon Photo diode
                                      Measuring Mode             : 1) % transmittance
                                                                   2) Absorbance
                                                                   3) Concentration
                                                                   4) K Factor
                                      K factor Range             : 0 to 1999
                                      Concentration range        : 0 to 1999
                                      Power                      : 230 V, 50 Hz
21.   20    Polarimeter ( SUGAR)                                                                                       2 No.

                                   The sodium light Polarimeter should be totally enclosed and should have heavily
                                   casted streamlined body. It should have rotating half shadow effect.

                                   Source : Sodium Lamp 35 watt. White light can be used up to 12o with choke
                                          with stand.
                                   Sugar          : -30 to + 130 ISS Micrometer drum enables reading to 0.1 sugar
                                                          degree directly and to 0.5 sugar degree by estimation.
                                   Scales : Angular 0.360o subdivided to 10 Micrometer drum enable direct
                                                  reading to 0.5o and by estimation to 0.2o.
                                   Tube           : 220 mm
22.   23 Carbon                                                                                                        2 No.
         And                       Carbon burette 4.5% or 1.5 % or 0.5% or 0.25% Absorption Vessel Leveling Bottle.
         Sulphur                   Three ways T – Shaped Glass Tube with Stop Cock, Graduated Vessel for sulphur
         Apparatus                 titration, 4 ml automatic sulphur titration burette, Two liter bottle for NaoH,
                                   Observation Tube, Filter Trap, Oxygen Purifying accessories and wooden frame with
                                   Sunmica base. Combustion tube furnace with thermocouple (using 3 silicon carbide
                                   rods) for maximum temperature up to 1450 0 C Accommodates 22 mm X 17 mm X
                                   500 mm Combustion tube. Control unit for the combustion tube furnace
                                   autotransformer type with ammeter, voltmeter and temperature indicator.
23.        Preparation of                                            Experiment                                        2Nos.
           aluminium silicate
24.   28 Digital PH                                                                                                     2Nos.
         Meter                          pH Range                            : 0 – 14 pH
                                        Millivolt Range           : 0 - + 1999 mV
                                        Temp. Compensation : 0 to 100 oC (manual)
                                    Display      : 4 – digit LED with automatic polarity & decimal point; mode
                                    annunciation by LED lamps
                                        Resolution                          : 0.01 pH; 1 mV
                                        Power                               : 230 V + 10 % , 50 Hz.
25.       Digital                                                                                                       2Nos.
          Flame                 Element                         Max ppm         Min ppm
          Photometr             Sodium                  100                      2
                                Pottasium                        100                      5
                                Calcium                  300                   30
                                Lithium                  25                       7
                                Reproducibilty          : + 2% & + 1 digit
                                Min sample                       : 3 ml
                                Detector                         : Photo diode Filters    narrow band i/f filters for
                                sodium,                                   potassium, calcium, lithium
                                Aspiration time         : 30 sec approx
                                Air                              : Up to 1.0 kg/cm 2 compressor
                                Power                            : 230 v + 10 %
26.   30 B.O.D. C.O.D Analysis                                                                                          2 Nos.
         Equipment             B.O.D. Incubator

                                       Constructed of double wall the exterior of mild steel finished in durable
                                        paint, interior made of SS/Al.
                                       The Glass wool insulation, double wall insulated metal door with magnetic
                                        gasket & lock.
                                       The full length inner glass door with latch.
                                       The whole unit should be rest on caster wheels.
                                       The cooling & heating system should be behind the working chamber with
                                        powerful air- circulation for uniform temperature.
                                       The Long strip heater should be provided for heating.
                            The control Panel should be mounted on the top of the incubator. On/off
                             switch, voltmeter, Ampere meter, Heat Energy regulator, Fully Automatic
                             Temp Controller cum indicator, Lamp for indication of heating & Cooling
                             signal & Protection Fuse.
                             Size                    : 6 ft3
                             Supply Voltage : AC 230 Volts 50 Hz.
                             Temp Range              : 5 deg C to 50 deg c + 0. 5 C
                             Voltage Stabilizer

                      C.O.D. Apparatus:
                       It should have 15 bottles of 40 mm diameter, Air condenser of 720 mm height. It
                      should be working on 230 V, 1000W, & 15 Samples should be put at a time
                      It should be provided with digital temp. control , timer & Buzzer to indicate
                      completion of refluxing.
                      1.0% accuracy with uniform temperature.
27.   32 UV Spectro                                                                                      2 Nos.
         Photo           Wavelength
         Meter           Range                              : 200 nm to 1000 nm, 0.1 nm increment
                         Accuracy                           : + or - 1 nm
                         Repetability                : 0.5 nm
                         Bandwidth                   : 2.0 nm

                         Photometric
                         Range                                : -0.3 to 2.5 Abs
                         Accuracy                             : + or - 0.005 Abs at 1.0 Abs
                         Repetability                : + or - 0.002 Abs at 1.0 Abs
                         Grating                              : 1200 lines /mm
                         Source                               : 1.Tungsten Halogen Lamp 12 V, 50 w
                                                                2. deuterium lamp
                         Detector                             : wide range Silicon Photo diode
                         Measuring Mode                       : 1) % transmittance
                                                                2) Absorbance
                                                                3) Concentration ( k factor ,multi
                                  standerds)                                           4) time scan
                                  Operating modes            : 1. Single W/L
                                                                        2. Multi W/L
                                                                        3. Scan ( Multiscan)
                                                                        4. Time scan.
                                  Scan spped                 : Slow ,medium ,fast
                                  Data processing                     : 1. Peak Peak ,
                                                             2. zoom of spectra,
                                                             3. overlaying of spectra
                                                                        4. 1 st to 4 th derivatives
                                                                        5. Avg. of scan
                                                                        6. Subtraction of two spectra.
                                                                        7. Spectrum store/recall
                                  Base line                           : Automatic base line correction
                                  Base line flat ness        : + or – 0.005 A , 200 to 1000 nm
                                  Computer system            : Pentium 700 MHz or above with windows
                                                             compatible
                                  Power                               : 230 V, 50 Hz
                                  Accessories                         : Two 10 mm path length quartz curettes
                                  and                                                    manual
28.   37 Vacuum Pump                                                                                                  2 Nos.
         Mounted On Movable   The vacuum pump should be oil–immersed, Rotary vane type pump. It should have
         Trolley              rotor with two spring loaded vanes, is mounted eccentric in the stator body. Back air
                              flow to be prevented by in-built NRV. All parts are to be of precisely machined,
                              ground and assembled with close tolerance. Standard accessories should contain
                              Moisture Trap, Inlet Dust Filter, and Vacuum Gauge with Regulator etc. Suitable
                              starter and belt guard should be provided. The Pump should be mounted on Trolley
                              with Handle.
                              No. of Stages                   : One
                              Free Air Displacement           : 50 LPM (1.8 CFM)
                              Drive Motor                             : 0.25 HP
                              Oil Filling                             : 2 litre Approx.
                              Pump RPM                                : 500
                              Motor RPM                               : 1440
                             Vacuum                                  : Upto 760 mm of Hg.(depending on
                             atm.pressure)
29.   39 Potentio Metric                                                                                              2 Nos.
         Apparatus           Range                    : 0 to + 1999 for mV and 0 to 14 pH for pH
                             Accuracy                          : + 1 Digit.
                             Display                  : 3 ½ digit D.P.M.
                             Power                    : 230 V AC, 50 HZ
                             Magnetic stirrer with speed control
                             Burette 10 ml automatic
                             Glass, reference, electrode and platinum electrode
                             Capable for acid base, potentiometer and Karl fisher
30.    4 Digital                                                                                                      2Nos.
         Viscometer          The unit should be accurately designed for easy to use & measurement of viscosity
                             of sample having digital display in centipoise or mPa S without doing calculations. It
                             should have 18 speeds for complete range capability. The unit should include
                             appropriate spindles, viscometer stand, guard leg and carrying case. Accuracy of unit
                             should be +1.0 % having repeatability of +0.2 %.
                             Viscosity Range : Min. 15 cP, Max. 2 Million cP.
                             Speeds            : 0.3 – 100 RPM
                             No. of Increment : 18,
                             Spindle           :4
31.   40 Gas Chromatograph                                                                                            1 No.
                                 Volume                              : 18.45 lit approx
                                 Operating temp.                     : Ambient to 450 deg centigrade
                                 Colling spped                       : Better then 300 deg centigrade to 70 deg in
                                 less                                         then 11 min.
                                 Over heat protection                : Required

                             Temperature programer
                                Isothermal temp.range           : Ambient to 450 deg centigrade
                                Ramp ratio programming : 0.1 deg c to 25 deg c per min.in 0.1 deg c step
                                Number of ramps           : 15
                                Max.no.of storage programe      : 15
                                 Injection System

                                 A: single vertical injectors with split convertors
                                 B: temp.range from ambient to 450 deg centigrade

                                 Pnumatic System

                                 Regulator /gauges          : 0.7 kg/cm 2 for carier gas and 0.4 kg/cm2 for h2
                                                            Gas Detector

                                 1    Flame ionisation detector
                                      Design :                        forced air diffusion
                                      Mode                            dual column with amplifier
                                      Temp range                      ambient to 450 deg
                                      Sensitivity                     0.015 coulombs /gm.
                                      Dynemic range          10 e 6
                                      Fid amplifier                   max.sensitivity 5 * 10 e -13
                                                                      amp.range 1,10,100,1000
                                                                      noise below then 1 * 10 e -13

                                 2    Thermal conductivity detector
                                      Design :                       dual path ,4 filament
                                      Filament                       tungston rhenium
                                      Mode                           dual column
                                      Temp range                     ambient to 450 deg
                                      Filament current               0-300 ma
                                      Sensitivity                    3500 dps units at 80 deg
                                     electronics                     full bridge constant
                                      filament temp.         150 to 450 deg c
32.   41 Automatic Titrator                                                                                        2 Nos.
                              Range                                   : 0 to + 1999 for mV and 0 to 14 pH for pH
                              Temperature                             : 0 to 100 deg auto and manual
                              Accuracy                                : + 1 Digit.
                                 Display                         : 20 character 2 line LCD.
                                 Power                           : 230 V AC, 50 HZ
                                 Display Range for Volume                : 99.9 ml with 0.01 ml resolution
                                 End point alaram                        : Audiable beep after titration over
                                 magnetic stirrer                                         with speed control
                                 Burette 10 ml automatic
                                 Glass, Reference electrode and platinum electrode capable for acid base,
                                 potentiometric and karl fischer
33.   42 Electric Furnace Muffle Chamber Size                    : 300*300*450 mm (W*D*H)                              1 Nos.
         ovens 1100 Degree C
         300,450
                                 With Refractory Brick lining MS door with handle - Thermally and electrically

                                  insulated .Furnace Shell rectangular cubical made of Heavy angle and Supported by

                                  MS sheets

                                  Heating Elements: kanthal wire Insulation Cerawool and Insulating Bricks.

                                  Temperature Range                       : 1050 ºC. (Max.)

                                  Control panel                           : PID Type Digital Temperature indicator

                                  cum                                             controller with a “K” type

                                  Thermocouple, Digital                                   timer (Range: 0-999 min. )

                                  with alarm. Ampere                                              Meter, Mains MCB,

                                  a Lamp for indication.

                                  Connections                             :5 m long suitable type cable
                           The furnace should be Powder Coated.This unit should be operated on 230 V AC 50
                           Hz.
34. 45      Refrigerator   Compression Type 165 Liter                                                         1 No.
35. 10 Vane Pump                                                                                              1 No.
                           General Data:


                           Pump Type                      : Single Vane Pump
                           Suction Port                    : 1 1/4" B.S.P
                           Delivery Port                   : 3/4" B.S.P
                           Pump Mounting                     : Flange Mounting

                           Material of Construction:                              Performance Data:

                           Pump Housing :S.G.I 500/7 or GGG40                      Oil Flow:
                                                                                   a) 14.5 lpm @ 7 bar
                           Vane/Piston      :EN-36A, thru harden          b) 11.5 lpm @ 140 bar
                           Shaft           :EN-41A, Nitride harden        Working Pressure: 175 Bar
                           Oil Cleanliness : AS 1638, Class-10,                    Peak. Pressure : 200 Bar
                           20 micron Filtrations                                   Mass : 12 Kg
                                                                                   Vol. displacement:
                                                                                            10cc/rev.
36. 11   Metering Pump                                                                                        1 No.
                           Plun. (MM)              :5
                           Size (MM)               :8x8
                           Capacity (LPH)          :2
                           Max. Pressure            : 200 Kg/cm2
                           HP/RPM                  : 0.5/1440

                           Material Of Construction:

                           Body                     :FG-200
                           Piston                  :SS
                                Suc/Del Valve            :SS
                                Eccentric Bracket        :FG-200
                                Drive Mechanism:                  :Worm Gear
                                Worm Gear Shaft                   : EN-8
                                Worm Wheel                        : EN-8
                                Micro Settings Part               : EN-8
                                Pump Head                : SS
                                Eccentric Plates          :MS
                                Gland Nut                : SS
                                Bearing                           : Standard
                                Sealing                           : Chevron (Teflon)
37. 14   Lapping Plate          12”x12”/30cmx30cm                                                    1No.
                                Grade I as per IS With leveling stand with calibration certificate
38. 18   Pneumatic Calibrator                                                                        1 No.
                                 Type             : microprocessor based with 8K memory

                                 Pressure         : 0 – 150 psig
                                 range

                                 Display          : simultaneous pressure and electrical on a

                                                      two – line a pneumatic LCD display

                                 Resolution       : 100,000 counts

                                 Accuracy         : Pressure Accuracy

                                                      15 PSI to 3000 PSI ±0.025% FS

                                                      5, 5000 and 10,000 PSI ±0.035% FS

                                                      DC Measurement Accuracy
                     mA ±0.015% of rdg ± 0.002 mA

                     Volts ±0.015% of rdg ±0.002 V

                     Temperature (RTD) Accuracy

                     RTD ±0.015% of rdg ±0.02 Ohms or

                     ±0.1°C at 0°C for Pt100



Electrical        : 24 mA OR 30 VDC
ranges

Operating         : -10 to 50 Deg C, effect on accuracy: None,
temp. range
                     over operating range

Pressure          : 1 / 8’’ (F) NPT 316 SS
connection

Battery           : NiCad (four AA cells) >35hours

                     nominal, rechargeable

Battery check     : Low battery indication about 60 minutes

                     Before the battery voltage get too low.

Zero offset       : through key pad to eliminate zero offset

%         error   : Calibrator should have ability to display input
display          versus output as a % error

Trip detect   : Calibrator should be monitor a significant change

                 of state and will freeze the last

                 pressure measurement on the display.

Engg. units   : Display read out in eight different engineering

                 units. (Does not include the various

                 temperature compensation choices for

                 water column measurement.

Damping       : Damping can be enable or disable facility

Auto          : Calibration can be done by using LEM 232
calibration
                 serial communication cable, uses the window

                 hyper terminal program. This is universal

                 on all windows pc.

Keypad        : 6 keypad for various operations.
39. 19   Worm Wheel Gear Box                                                                                          1 No.

                               Worm wheel gear box
                               MOC CI having gear ratio 1:4
                               Torque 25nm
                               Motor 1 HP , RPM 1440
                               Ratio 1:4




40. 21   Variable Frequancy                                                                                           01 No.
         Drive                 Supply                                       : 230 V AC
                               El. Motor                                    : 1 H.P.
                               Drive                                        : 1 HP standard make with fan and
                                                                            protected cover.
                               Frequency set                                : Up to 50 Hz.
                               Features                                     : variable speed drives full display of
                                                                                 parameter like – current, voltage,
                                                                                 frequency, RPM.

                               Facility by upload and download parameter.
                               Safety agins high voltage power sources.
                               With good quality stand with paint.
41. 13   Shock pull treasure
         measurement
42. 14   Hydraulic puller      3 jaw hydraulic pullers with in-built hydraulic pump
                               Capacity: 6 tonne
                               Stroke(mm): 60
                               Reach(mm): 185
                               Spread(mm) : 255
                               Weight(kg) : 4.5
43. 28   Planetry Gear Box     Rated Torque                     : 630 Nm                                              1 No.
                               Rated power                      : 5.0 KW at 1400 Rpm
                            Radial load                 : 7460 N
                            Thermal rating              : 7.5 KW
                            MOC                         : Casing (cast iron)
44. 7   Screw Pump          General Data:                                                   1No.
                            Pump Type                            : Monoscrew
                            Pump Size                            : 1/2" x 1/2"
                            Fluid                                : Viscous fluid
                            Suction                     : Flooded
                            Body                                 : MS
                            Capacity                             : 4-5 LPM
                            Rotor                                : SS-304
                            Head                                 : Up to 10 MTR.
                            Stator                               : Neoprene
                            Motor Rating                : 0.5 HP
                            Sealing                     : Gland Packing
                            Motor Speed                 : 960 RPM
45. 8   Multistage Pump     Multistage Pump                                                 1No.

                            Size (MM)                   : 31 * 31
                            Capacity (LPM)              : 77
                            Max. Pressure               : 45 Kg/cm2
                            HP/RPM                      : 2/1440

                            Material of construction:
                            Casing                      :FG - 200
                            Staging casing              : FG - 200
                            Impeller                             :Mang.Bronze 52/3/2/1/42
                            Shaft                                :SS - 410
                            Sealing                     :Grph Asb Gland packed
                            Bracket/ Brg.Hou                     : FG - 200
                            Bearing                     : FAG/KBC/SBL
46. 9   Air Operated Pump   Type                                 : AOD 25                   1No.
                            Suction                     : 1"
                            Discharge                            : 1"
                                  Air Inlet                                : 3/8"
                                  Pressure gauge                  : 10 kg/cm2
                                  Compressor required             : 7 psig
47. 1    Cooling          Tower                                                                             1 No.
         (Communication     For Cooling tower :
         Instrumentation Lab)   Type                          : Induced draft, frp,counter flow type
                                Inlet temp                    : 40.0 0 c
                                Outlet                        : 34.0 c
                                Design wet bulb temp : 28.0 c
                                Water flow rate               : 55.0 ltrs/min
                                Cooling capacity     : 5.0 T.R
                                Fills flute sixe              : 12 mm With pvc fills
                                Fan type                      : axial flow, direct driven
                                Electric motor                : 0.5 H.P /1400 R.P.M

                                  MOC
                                  Frame work                      : M.S, hot dipped galvanized
                                  Casing / body /basin    : FRP
                                  Fan blades                      : Cast aluminum alloy
                                  Fan Hub                         : Cast aluminum alloy

                                  Pump
                                  Pump type                        : Centrifugal Monoblock type
                                  Power consumption       : 1.0 H.P
                                  Connection detail (in/out)       : 25 mm / 25 mm
                                  Water discharge capacity         : 4 Cubic mtrs / Hr. @ 25 mtrs head
48. 2    Pressure Vessel With                                                                               1 No.
         All    Accessories ( Pressure Capacity                   : 5 Kg/cm2
         Training Type )      Size                                : 150 mm dia. x 300 mm
                                                         Height
                                  MOC                             :S.S
                                  With pressure gauge, safety valve, needle valve, drain and inlet valve.
49. 10   Ultra – Sonic Crack      Frequency                       : 0.5 – 12 MHz (0.5 – 25.00 MHz)          1 No.
         Detector                 Sensitivity                     : 140 ± 3 dB
Gain Control                     : 103 dB in 0.25 deB Steps
Horizontal Linearity             : ± 1% of Test Range
Vertical Linearity               : ± 3% of Screen Height
Accuracy of calibration Gain: ± 1 dB
Test Range                       : 10 mm - 10 mt in Steel
CRT Screen                       : 70 x 55 mm (100 x 80 mm)
Delay                            : 0-500 mm in steel (up to 4 meter)
Suppression                      : 0-5% of screen height
PRF                              : 125 Hz-2 KHz coupled with test range
Voltage Supply           : 7.2 VDC (Ni-Cd Battery) – (Mains 230 V)
Battery Life                     : 3-4 Hours
Acceptable Temperature           : 0-50ºC
Test Method                      : Pulse echo / through transmission
Operating Mode                   : Single / Double Probe, T/R Mode.
Dimensions & Weight : 4400 AV @ 380 x 280 x 180 mm – 6Kg.
                                 inc. Batterues)
Pulse Energy selection : High energy & high penetration.

Accessories :

                          Ultrasonic Transducers (Probes)

I.      Replaceable Membrane Type Normal Beam Probe with BNC              Connector
        a. Dia : 24 mm, Frequency : 1 MHz (KR100-1)
       b. Dia : 12.5 mm, Frequency : 4 MHz (KR50-4)
      c. Dia : 20 mm Frequency : 2.2 MHz (KR75-2.2)

II      Replaceable Wedge Type Angle Probe with BNC Connector
        Dia : 12.5 mm, Frequency : 4 MHz (KT50-4)

III     Dual Crystal Probe With Lemo-00 Connector
        a. Dia : 20 mm, Frequency : 2.2 MHz (D75-2.2)
      b. Dia : 12.5 mm, Frequency : 4 MHz (D50-4)
                           IV        Wedges for the above Probes
                                     1. Wedges for Probe – KT-50-45 Degree
                                     2. Wedges for Probe – KT-50-60 Degree
                                     3. Wedges for Probe – KT-50-70 Degree

                           V         Cables
                                     1) BNC-BNC Cable (2 Meters Long Single)
                                     2) BNC-LEMO-00 Cable (2 Meters Long Dual)

                           VI        Blocks
                                     1. V 1 Block
                                     2. V 2 Block
                                     3. Step Block (2-10 mm with 2 mm Step)

50. 11   X – Ray Machine                                                                 1 No.
                                WEIGHT
                                                       Approx.
                                                       210kg



                                DIMENSIONS - (incl.    HEIGHT         LENGTH     WIDTH
                                TV)

                                Overall                1.70m          1.86m      0.82m

                                Lower Section          0.92m          0.90m      0.62m

                                Middle Section         0.21m          1.86m      0.82m

                                Upper Section          0.68m          1.00m      0.56m
                                     X-RAY TUBE               Fixed anode, 65 – 85KVP @ 1mA continuous

                                                              rating Air Cooled

                                     IMAGING SYSTEM           9” Image Intensifier

                                                              CCD Miniature Camera

                                                              12” High Resolution TV Monitor

                                     REJECTOR                 Pushrod for vomit oysters

                                     CAPACITY                 1800 Oysters / Hour (dependent on oyster

                                                              and operator)

                                     CONVEYOR                 490mm wide shelf, aligning vinyl belt, driven

                                                              by ⅛ H.P. Variable speed geared DC motor

                                                              Bearings are ‘zero maintenance’ polymer type

                                     POWER                    Maximum power consumption is 200VA



51. 60   Engineers ratchet brace                                                                              1No.
         with universal drilling Technical specification of Engineers ratchet brace (12 mm):
         pillar                      Specification in mm                                  : 13 mm
                                     Speed                                                : 4
                                     Spindle nose taper                                   : solid
                                     Range of speed                              : 500 - 2825
                                     Spindle center to column                             : 155
                                     Spindle travel                              : 75
                                     Size of square table                                 : 210*200
                                           Base size                                        : 340*220 mm

52. 69   Weighing          digital Single Pan Analytical Balance Digital Type
         balance 0.1     mgm - Capacity                              : 200 gm                                                1 No.
         100gm                     Pan                               : SS
                                           Display                   :LED/LCD
                                           It should have unit selection facility and percent weighing. With Draft shield,
                                           Dust Cover
53. 70   Weighing          digital                                                                                           1No.
         balance 1.0 mgm - Single Pan Analytical Balance Digital Type
         100gm                     Capacity                          : 200 gm
                                   Pan                               : SS
                                   Display                  : LED/LCD
                                   It should have unit selection facility and percent weighing. With Draft shield, Dust
                                   Cover
54. 73   Weighing        balance           Single Pan Digital Balance Type                                                   1No.
         digital 1-1000 gm                 Capacity                            :1000gm
                                           Readability                         : 0.1gm.
                                           Pan Diameter               : 220 X 140 mm approx.
55. 17   Air      Purge      Level                                                                                           1 No.
         Indicator Without Test            Casing           : Aluminium with Front Transparent Cover
         Rig                               Glass Tube                : Borosilicate
                                           Arrangement               : Filling Plug, Drain Plug, Zero Adjustment Knob
                                           For Air Purging : Air Bubbler
                                           Purge Pipe                : SS 304
                                           End Connection : Suitable for 6 mm OD pipe
                                           Range                     : 500 mm
                                           Fluid                     :Red Alcoholic
                                           Tank                      : 200 * 200 * 600 of SS-304 with glass tube
                                                            level indicator with protecting
56. 18   Buoyancy Type Level                                                                                                 1 No.
         Indicator – 1000 Liter            Measuring Tape: SS 316
                                           Float                     : SS 304
                                           Measuring Range           : 1 meter minimum
                                         Indication           : Scale with 2 – pointer dial
                                         Min. reading         : 1mm
                                         Float Dia.           : 400 mm
                                         Accuracy             : + 2 mm
                                         Gauge Head     : 1½” Connection, weather proof IP 55,
                                                       Aluminium alloy cased housing. Gauge
                                                       should be mounted on separate panel.
                                        Level Tank      :1200 mm height, 700 x 700 mm Area with
                                                       feed and drain valves.
                                 MS Framework to support the assembly.
57. 24   Dead Weight Tester                                                                                            1 No.

                                 Bead weight tester up to 20 Kg / Sq.Cm With All Accessories                      It
                                 should consist of frictionless piston (ram) mounted on a rugged base. Effortless
                                 screw type operating system. Rotation of the screw should produce the pressure
                                 which is to be balanced by precision weights.



                                 Range                           : 0.5 – 30 kg/ cm2
                                 Step Size                       : 0.1 kg/ cm2
                                 Accuracy                        : 0.2 to 0.1 %

                                 Standard Accessories:

                                 •        Accurately Calibrated Weights to cover the entire range with a carrying
                                 case
                                 •        Gauge connection adapters for 1/8”, ¼”, 3/8”, ½” BSPF; ½”      NPTF, 20 *
                                 1.5 mm on ½” BSPF Fitment, Pointer Puller and Pointer Punch, Gauge Opener, Spirit
                                 Level, A set of spanners in a tool box, 500 ml SAE 30/ 40 Oil in bottle
                                 •        One set of spare seals and O ring

58. 25   Air Compressor – 150 L 1.0 HP Two Stage Reciprocating type Air Compressor with minimum 80 liters Storage 1 No.
         Bs With Electric Motor Tank & intercooler (tested at 10 kg/ cm2) to provide about 2 CFM air @ 3 kg/ cm2
                                along with accessories such as Pressure gauge, Spring loaded safety valve, drain
                               valve, intake air filter, Starter etc.
                    o
59. 26   Furnace-1200 C With   Electric furnace is a device for providing heat by electrical means. It consists of a 1 No.
             Accessories       chamber that receives the electric current, which is used to raise the temperature of
                               the materials placed in the furnace.

                               Electric furnace is used to heat materials to great temperatures in order to produce
                               useful products. For example, heat is used to melt different metals so that they can
                               combine to form an alloy. Electric furnaces are also to improve the quality of steel
                               and glass by heating and cooling them at controlled temperatures below the melting
                               point. Special types vulcanize rubber, mold plastic, and dry and bake other materials.

                               Dual chamber model with a high temperature-hardening chamber rated for 1200 0C.
                               Ideal for high-speed steels and ceramics, this chamber is designed with silicon
                               carbide heating elements, and ceramic fiber (Cerawool) insulation for fast efficient
                               heat. These chambers are brick lined for rugged applications and the elements
                               located above and below the same size of 200 mm (H) x 300 mm (W) x 1200 mm (D).
                               Each chamber operates independently and whole models is completely rewired and
                               equipped with digital controls ready for connection to main power supply.

                               Specifications:

                               Upper & Lower Chamber:
                               Size                            : 300(W) x 200 (H) x 1200(D)
                                                               Thermally and electrically insulated with refractory
                                                               brick lining and MS door handle.

                               Furnace shell:
                               MOC                            : MS
                               Shape                          : Rectangular Cubical Fabrication using
                                                      heavy gauge CRCA Sheet and Total body
                                               in mounted of caster wheel.
                               Heating Element                : Silicone Carbide (Si-C)Rod
                               Max. Temperature               : 12000C
                               Insulation material            : 100 mm of Cerawool
                                 Control panel :

                                 Controller                       : On-Off type digital temperature indicator
                                                         cum controller of 12000CRange with
                                                suitable temperature sensor/Thermocouple                           with
                                         connecter centrally placed for                           measuring
                                         temperature. Connecter                                   centrally placed for
                                         measuring                                         temperature.
                                 Transformers            : Suitable transformers for switching both
                                                chambers.
                                 Power connections       : Operating power: 440V, 50 Hz (+ 10%) AC
                                 Connector               : 4 Pin 15 amp.
                                 Metal plug supply cord: m long suitable type cable Electrical witching and fuses.

                                 The furnace shall be painted with good quality epoxy paint over a layer of red oxide.
                                 The above furnace will be supplied with two set of operating cum instruction and
                                 maintenance manuals for academic purpose
60. 27   D.P. Indicator – 2500                                                                                            1 No.
         mm of h2o             Measuring Principle       : Piezo Resistive
                               Range                              : 0 – 2000 mm WC
                               Accuracy                           : + 0.5%
                               Power Supply              : 11- 45 V DC
                               Output                             : 4-20 mA DC
                               Conduit Connection        : ½” / ¼” NPT
                               Diaphragm Material        : Stainless Steel

61. 28   Turbine   Type   Flow                                                                                            1 No.
         Meter                   Flow meter type                 :Turbine
                                 Flow range : M3/hr              : 0.22 to 2.2
                                 Max temp                        : 1200C
                                 Materials                       : Body S.S
                                 Flanges                         : SS316
                                 Rotor                           : SS316
                               Bearing                         : Tungsten Carbide
                               Linearity                       : +/- 1%
                               Installation                    : Horizontal

                               Field Electronics:
                               Mounting                        : Directly of flowmeter
                               Output                  :4-20 mA linear
                               Power supply            :12 to 28 V DC

                               Storage Tank:
                               Capacity                        : 80 liter
                               MOC                             : SS-304
                               With ½” drain valve of SS.

                               Collection Tank:
                               Capacity                         : 50 liter
                               MOC                              : SS-304 with self graduated glass tube
                                                       level indicator with suitable cover
                               With 1” drain valve and piping leading the water to the sump tank.
62. 29   Standard Calibrator                                                                              1 No.
                               Accuracy at 27 Deg. C : +/- 0.1% FS +/- 2 counts
                               Display               : 4 ½ digit
                               DC Voltage Measurement         : 0-199.99 mV
                               Direct Current Measurement: 0-19.999 mA
                               Resistance Measurement         : 0-1999.9 ohms
                               Thermocouple Output
                               Measurement           : For Fe/Ko, Cr/Al or Ni Cr/Ni DIN & Pt
                                               Rh/Pt
                               Range                          : 0-199.99 mV
                               Reference Temperature : 0 Deg. C
                               Accuracy of Compensation       : +/- 1 Deg. C +/- 2 counts
                               Voltage Source        : 0-199.99 mV
                               Current Source        : 0-19.999 mA
                               Resistance Source              : 1 to 1000 ohms
                                  Lead Balancing Resistance: For mV source
                                  Power Supply           : 230 V +/- 10%, 50 Hz, 6 VA approx.
                                  Size                             : 300 x 100 x 175 mm
63.      Oil Bath                 Oil Bath: SS Tank Capacity of 2 liter with 50 mm Cerawool Insulation, 1 Kw Heater   1No.
                                  Non-Contact Type. Digital Temperature indicator Cum Controller to Control the
                                  Temperature.
                                  Outer Body Should be MS Powder Coated.
64.      Air Dryer                For 150 Psi Compressor                                                              1 No.
65. 10   C.F Pump With Motor:                                                                                         1 No.
                                  Single Stage Centrifugal Pump coupled to a 1.0 H.P. capacity D.C. motor with D.C.
                                  drive to make the supply from sump tank. A D.C. motor of 1 H.P. capacity, Single
                                  phase, 230 volts running at 2800 RPM.

                                  Type                             : Centrifugal Pump
                                  No. of Stages           : One
                                  Power                   : Connected to 1.0 H.P Motor
                                  Size                    : 25 mm
                                  Max. Head                        : 8 meter
                                  Max. Flow                        : 100 LPM
                                  Material of Construction for Pump:
                                  Pump Casing             : Close Grained Cast iron
                                  Impellers                        : Cast iron
                                  Shaft                   : Carbon Steel

66. 12   Plunger    Pump   With                                                                                       1 No.
         Motor:                   Body                           : FG-200,
                                  Piston:M.O.C                    : SS
                                  Valve Seat :M.O.C              : Gun Metal,
                                  Suc/Del valve :M.O.C    : Gun Metal,
                                  Check Valve :M.O.C      : SS,
                                  Air Chamber                    : FG-200,
                                  Bulldozing Chamb               : FG-200,
                                  Drive Gear                     : EN-8,
                                  Size                           : 20 mm X 20 mm,
                                Electrical Motor :
                                Rating                              : 1 H.P.
                                Speed                      : 1440 RPM,
                                Supply                      : 3 Phase, 440 RPM,
                                With suitable starter.
67. 13   Reciprocating   Pump                                                                                        1 No.
         With Motor:            Type                   : Reciprocating – Double Acting
                                Pump Bore                       : 44.5 mm
                                Pump Stroke            : 35 mm
                                Suction Pipe           : 25 mm
                                Delivery Pipe          : 19 mm
                                Pump Speed             : 210 RPM
                                Power                           : 1 HP
                                Motor Speed            : 1440 RPM
                                V Belt Size                     : A 48
                                Capacity                        : 1400 LPH (Approx.)
                                Suction Lift                    : 7.5 meter
                                Total Head                      : 30 meter
                                Pressure                        : Tested up to 6 kg/cm2
                                Max. Head                       : 5 kg/cm2
                                Pump is provided with air vessel.

                                Motor Drive:
                                Motor                               : 1 HP DC
                                Type                       : Thyristor Control for variable speed
68. 14   Lobe   Pump     With                                                                                        1 No.
         Motor:                 Discharge                          :50 mm
                                material of construction           :carbon steel

                                Twin Lobe Roots Blower should be Suitable For Oil Free Conveyance Of Air/ Gas With
                                Hardness And Ground Timing Gears. It should be fitted to transmit torque within 10
                                m accuracy. Suitable for continues rating.
                                Capacity                        : 60 Cubic meter/hr.
                              Pressure                        : Up to 0.3 Kg/Cm2.
                              Machine RPM             : 1450 RPM
                              Motor RPM                       : 1450 RPM / 2 H.P ,Three Phase ,440 V
                                               A.C
                              Shaft kw                        : 1 Kw (Approx.)
                              Lobe                            :Twin type
                              Lobe M.O.C                      : S.G.I / C.I iron
                              Body M.O.C                      : C.I
                              Gear M.O.C                      : Alloy steel / C.I


                              The setup should be Complete With Following Accessories
                              1)    Grob Filter
                              2)    Suction Silencer
                              3)    Discharge Silencer
                              4)    Non Return Valve
                              5)    Safety Valve
                              6)    Base Frame For Motor
                              7)    Base Frame For Machine
                              8)    Pressure Gauge Of Suitable Range
                              9)    V Pulley For Motor & Machine
                              10)   V Belts
                              11)   Suitable Starter for motor
                              12)   Belt guard
69.   Multiple/ Triple Effect                                                                          1 No.
      Evaporator              Evaporator:
                                               Nos.                    : Three
                              Tube Side:
                                               Diameter              : 12 mm
                                               Length         : 100 mm
                                               MOC                   : SS (Nonmagnetic, Rustproof)
                                               Nos.                  : Arranged on triangular pitch
                              Shell Side:
                                               Diameter                : 150 mm
              Length     : 400 mm
              MOC               : SS (Nonmagnetic, Rustproof)
Condenser:
              Nos.               : One

Shell Side:
              Diameter          : 75 mm
              Length     : 500 mm
              MOC               : SS (Nonmagnetic, Rustproof)

Tube Side:
              Diameter          : 10 mm
              Length     : 500 mm
              MOC               :SS (Nonmagnetic, Rustproof)
              Nos.              : Arranged on 18 mm triangular
                         pitch
Feed Tank:
              Capacity           : 50 liter
              MOC                : SS (Nonmagnetic, Rustproof)
              Pump               : SS body, Monoblock 0.5 HP
                         Single Phase Motor
Feed Arrangement:
              Type               : Rotameter
              Range              : 2 – 20 LPH
              MOC                : Borosilicate Glass Tube Housed in MS Box
                                 and front Perspex side with white
                                 background.
              Float              : SS
              Valve              : Integral Type

Steam Generator:
              Type               : Double Wall
              Size               : 300 * 500 mm * 3 mm thick inner
                         shell
                                       350 * 500 mm * 0.5 mm thick outer shell
                                       with glass wool filled in the annular space
        MOC                            : SS (Nonmagnetic, Rustproof)
        Pressure                       : 2-2.5 bar (absolute)
        Heater                 : 8 kW
With Pressure Gauge, Pressure relief valve (spring loaded), manual relief valve and
feed line with valve, water level indicator and low level cutoff switch with alarm
should be provided.
Cooling Water Tank:
        Capacity                        : 50 liter
        MOC                             : SS (Nonmagnetic, Rustproof)
        Pump                            : SS body, 0.5 HP, Monoblock, Single
                               Phase
Cold Water Supply Arrangement:
        Type                            : Rota meter
        Range                           : 1 – 10 LPM
        MOC                             : Borosilicate Glass Tube Housed in
                               MS Box and front Perspex
        Float                           : SS
        Valve                           : Integral Type

Product Vessel:
       Nos.                            : 4 Nos
       Capacity                        : 5 liter
       MOC                             : SS (Nonmagnetic, Rustproof)

PID Controller:
       Use                               : To Control Steam Temperature
       Accuracy                          : 2 C
With auto tuning facility, Fully Programmable Digital Type

Temperature Measurement:
      Sensor                   : J type thermocouples
      Position                           : At Strategic Temperature
                                                                          measurement Point of Each      Evaporator

                                   Interconnecting piping with necessary valves and fittings with necessary thermal
                                   insulation wherever necessary.

                                   Control Panel Consisting of MCB for heaters, ON/ OFF switches and Indicator lamps
                                   for feed pump and cooling water pump and fully programmable minimum 15 zone
                                   digital scanner for temperature indication, PID Controller etc.

                                   The whole assembly should be mounted on MS framework painted with good quality
                                   paint.
70. 21   Plate And Frame Filter                                                                                          21
         Press:                 The Plate & Frame Filter Press should consist of 5 plates & 6 frames. The feed should
                                be allowed from the top and filtrate collected at the bottom individually for each
                                plates by operating Valves/ cocks. The slurry tank should be provided with a stirrer,
                                slurry pump with by pass back to slurry tank. Pressure gauge should be at the inlet of
                                the slurry. SS trench and Collection vessel should be provided to collect cake and
                                filtrate respectively.

                                   Filter Plates:
                                            MOC           : PP
                                            Size          : 300 mm square, 25 mm thick
                                            Nos.          :5

                                   Frame Plates:
                                          MOC             : PP
                                          Size            : 300 mm square, 25 mm thick
                                          Nos.            :6

                                   Filter Cloth:
                                            MOC           : Polypropylene
                                            Nos.          : 24 Nos.in the size of Plate & Frame

                                   End Plates:
        MOC              : Acrylic blocks
        Size             : 300 mm square, 25 mm thick
        Nos.             :2
Two Nos. 25 mm guiding screw rod as well as arrangement for tightening should also
be provided all in CI & MS.

Water Tank:
       Capacity      : 45 Liters
       MOC          : SS-304,1.5 mm thick
       With ½” Ball Valve of Nickel Coated for Drainage

Slurry Tank:
        Capacity      : 45 Liters
        MOC          : SS-304,1.5 mm thick
        With 1” Ball Valve of Nickel Coated for Drainage
1/8 HP motor with reduction gear stirrer to ensure proper mixing of slurry.

Feed Pump:
       Type           : Gear
       Power : 0.5 H.P. motor, Single phase.

Water Pump:
       Type           : Monoblock
       MOC            : SS
       Power : 0.5 H.P. motor, Single phase.

Cake Trays:
        Size            : 250 mm * 200 mm * 50 mm
        Nos.            : 3 Nos.
        MOC             : SS-304

Thorough Cake washing arrangement should be provided with the help of plates.

Inter connecting piping network (1/2” GI and wire braded plastic pipe) with suitable
                              valves.

                            Control panel consisting of Switches and Indication Lamps for Slurry Pump, Water
                            Pump, ON/ OFF switch for stirrer and indicator lamps.
71.   Refrigerator          Compression Type 250 Liter                                                          1No.
72.   Centrifugal pump test Centrifugal Pump Test Rig:
      rig
                            The setup will consist of a sump tank and a measuring tank along with a Centrifugal
                            Pump. A Burden tube type compound (vacuum-pressure) gauge and pressure gauge
                            are provided on the suction and delivery pipe respectively to measure the suction
                            head and delivery head respectively. The Measuring tank is equipped with self 1No.
                            graduated liquid level glass tube and a drain valve. A gate valve has been provided
                            on the delivery line to change the delivery head of the pump.
                            Sump Tank:
                            MOC                       : SS 304
                            Capacity                  : 130 litres
                            With 1” drain valve of ball type.

                              Measuring Tank:
                              MOC                     : SS 304
                              Capacity                : 70 litres
                              With self graduated glass tube level indicator & 1” drain valve

                              Pump:
                              Type                    : Centrifugal Pump
                              Power                   : 1.0 H.P., 2800 RPM D.C. Motor
                              Type                    : Thyristor Control for variable speed
                              Suction Pipe            : 25 mm
                              Delivery Pipe           : 25 mm
                              Pressure                         : Tested up to 2.5 kg/ cm2

                              Pressure Gauges(Glycerin filled)
                              Type                   : Bourdon Tube Type
                              Quantity               : 2 nos.
                               Purpose                : Compound (vacuum-pressure) gauge on the suction to
                               measure the suction head and Pressure gauge on the delivery pipe to measure the
                               delivery head

                               Control Panel:

                                    On/ Off switch,
                                    Mains Indicator Lamp, MCB for overload protection.
                                    Digital RPM Indicator,
                                    Digital Energy Meter and
                                    Variable Speed D.C. Drive.
                               Necessary piping, valves and fittings shall also be incorporated in the unit.
                               The well designed setup shall be having suitable MS framework with good quality
                               paint.
73. 26   Gear Pump Test Rig:                                                                                           1 set
                               Apparatus consists of a close circuit through which oil is circulated continuously by
                               means of a gear pump coupled to D.C. motor to make the supply from sump tank. A
                               watt meter is provided for measurement of input power to motor.

                               Sump Tank:
                               MOC                     : SS 304
                               Capacity                : 100 litres
                               With 1” drain valve of ball type.

                               Measuring Tank:
                               MOC                     : SS 304
                               Capacity                : 60 litres
                               With self graduated glass tube level indicator & 1” drain valve

                               Pump:
                               Type                     : Gear Pump
                               Power                    : 1.0 H.P., 1440 RPM, D.C. Motor
                               Suction Pipe             : 25 mm
                               Delivery Pipe            : 25 mm
Flow Rate                : 10 LPM
Pressure                 : Tested up to 5 kg/ cm2

Pressure Gauges (Glycerin filled):
Type                   : Bourdon Tube Type
Quantity               : 2 nos.
Purpose                : Compound (vacuum-pressure) gauge (0 -760 mmHg) on the
suction to measure the suction head and Pressure gauge on the delivery pipe to
measure the delivery head

Control Panel:
    Variable speed D.C drive
    On/ Off switch,
    Mains Indicator Lamp, MCB for overload protection,
    Digital Energy Meter and
    Digital R.P.M Indicator

Necessary piping, valves and fittings shall also be incorporated in the unit.

The well designed setup shall be having suitable MS framework with good quality
paint to house the setup without the need of any foundation.
74.   Conference   Mike                              17.5V DC/3A Max.; -34dBV (20mV)
                                      Line Output
      system                                         50W RMS at 2% THD, 90W Max.                             1Set
                                     Power Output
                                                     1×Mic 1.0mV/2k       Balanced)
                                          Inputs
                                                     2×Mic 0.65mV/4.7k (Unbalanced)
                                                     1×Aux 100mV/470k        (Unbalanced)
                                                     60-14,000Hz (± 3dB)
                               Frequency Response
                                                     > 60dB
                                                     Bass: -10dB at 100Hz
                                    Tone Controls
                                                     Treble: -10dB at 10kHz
                                                     200mV/600
                              Preamp / Rec Output
                                                     1V/1k
                                      Line Output
                                                     200mV/600
                                      Send Output
                                                     200mV/10k
                                      Return Input
                                                     4 , 8 , 16 , 70V & 100V
                                   Speaker Output
                                                     AC: 220-240V, 50/60HZ
                               Power Requirement
                                                     DC: 24V (2×12V Car Battery)
                                                     250VA
                               Power Consumption
                                                     -63dBV/ bar 7.5mV/Pa
                                       Microphone
                                                     < 50mA Max.
                             Current Consumption
                                                     75 seconds approx.
                          Mic Auto Switch-Off Time
                                                     Line
                                            Input
                                                     Line, Headphone with Volume Control
                                           Output
                                                     Max Input 300mW mpedance 16
                                          Speaker
                                                     Talk Switch, Speaker Volume Control, Headphone Volume
                                          Controls
                                                     Control

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:6
posted:3/15/2013
language:Unknown
pages:53