Docstoc

SMART BOARD _ HITACHI PROJECTOR

Document Sample
SMART BOARD _ HITACHI PROJECTOR Powered By Docstoc
					SMART BOARD & HITACHI PROJECTOR

INSTRUCTIONS

ALWAYS LEAVE THE SMART BOARD WITH THE “DO NOT USE” WARNING SIGNS IN PLACE!

SMART BOARD - PROJECTOR ONLY 1. Turn on Hitachi projector using remote control 2. Screen illuminates 3. Connect laptop to projector via VGA port on wall beside the SMART board (cable provided) 4. If you want to play an audio presentation, connect laptop headphone socket to small 3m jack socket next to RGB socket. SMART BOARD – INTERACTIVE CAPABILITY 1. Using USB cable connect to USB port on laptop 2. Connect laptop to projector via VGA port on wall beside the SMART board (cable provided) 3. SMART board will activate automatically 4. If not, run the SMART board connection wizard which appears on the screen 5. SMART board control panel will open 6. Use pen as a mouse or use drawing toolbar to create shapes etc. on presentations.

AFTER USE 1. Turn off projector with remote control 2. Replace ‘do not use’ signs on board 3. Return Hitachi Projector Remote Control to Elinor Noble (F09)

1

SMART BOARD – Interactive Software Instructions

In order to use the interactive capability of the SMART Board and record your notes or drawings you need to take the following action: 1. First download Notebook software 10 from: http://www2.smarttech.com/st/en-US/Products/SMART+Board+software/ 2. Get activation code from Elinor Noble. 3. Connect your laptop to the SMART Board as instructions on page 1

2


				
DOCUMENT INFO