Ultrasonic machining is a low material removal rate

Document Sample
Ultrasonic machining is a low material removal rate Powered By Docstoc
					Ultrasonic machining is a low material removal rate (MRR), loose abrasive machining process in which
the mirror image of a shaped tool can be created in hard, brittle materials. Material removal is achieved
by the direct and indirect hammering of abrasive particles against a workpiece by means of an
ultrasonically vibrating tool.

       A nearly limitless number of feature shapes—including round, square, and odd-shaped
        thru-holes, and cavities of varying depths, as well as OD-ID features—can be machined
        with high quality and consistency.
       Features ranging in size from 0.008" up to several inches are possible in small
        workpieces, wafers, larger substrates, and material blanks.
       Aspect ratios as high as 25-to-1 are possible, depending on the material type and feature
        size. View the ultrasonic machining 3D animation to learn more about how ultrasonic
        machining works.

        Ultrasonic machining is suitable for machining of hard, brittle materials including:

       Glass
       Sapphire
       Alumina
       Ferrite
       PCD
       Piezoceramics
       Quartz
       CVD Silicon Carbide
       Technical Ceramics

Applications for ultrasonic machining include:

       Tight-tolerance round thru-holes for semiconductor processing equipment components
       Micromachined and micro-structured glass wafers for microelectromechanical systems
        (MEMS) applications
       High-aspect ratio thru-vias; 25-to-1 aspect ratios are possible in glass and advanced

Advantages of ultrasonic machining include:

       The process is non-thermal, non-chemical, and non-electrical, leaving the chemical and
        physical properties of the workpiece unchanged. This low-stress process translates into
        high reliability for your critical applications.
       Multiple features can be machined at the wafer or substrate level simultaneously, and the
        process is scalable. Our process is often the highest quality and lowest cost solution.
       Ultrasonic machined features have vertical side walls, enabling you to preserve valuable
        space for your designs that translate into higher productivity.
      The process integrates well with semiconductor and MEMS processes. Machined features
       can be aligned to previously patterned, machined, or etched substrates.

Contact Bullen to learn more about ultrasonic machining and our host of glass machining,
ceramic machining, and advanced material machining capabilities.

Shared By: