LINEAR IC APPLICATIONS LAB

Document Sample

```					             ECE Department – IC APPLICATIONS LAB

Experiment No: 12      II/IV CSE& IT (I Semester)         Page 1 of 3

8-BIT A/D CONVERTER

Aim: To find the digital output value for a given analog signal

Apparatus:

1. 8-bit A/D converter kit
2. Connecting wires
3. Digital Multimeter

Circuit Description:

Analog to Digital converters are used in all computer applications
that require interface with the analog world. In addition, if a
digital read out of an analog measurement is needed, a stand-
alone ADC can be used to generate the bit patterns required to
drive a decimal or hexadecimal display. The method of successive
approximation is widely used because of its accuracy and speed.
We can get the theoretical output value using below equation

(A/D input voltage)/1 LSB value(=Vref/2n)

For Example:

Input voltage= 1.00Volts.
1 LSB value = 5/256 =0.01953V.
Output voltage = 1/0.01953
= 51.2 (10)
= 33(16)
= 00110011(2)
ECE Department – IC APPLICATIONS LAB

Experiment No: 12    II/IV CSE& IT (I Semester)     Page 2 of 3

Circuit Diagram:

Tabular form:
ECE Department – IC APPLICATIONS LAB

Experiment No: 12    II/IV CSE& IT (I Semester)         Page 3 of 3
Procedure:

1. Study the operation of the circuit.
2. As the circuitry is already wired , connect trainer to the
mains and switch on the power supply.
3. Measure the output voltages of regulated power supply
circuit that is +5 volts.
4. Set the input at the voltages shown in table1 and fill the
reminder of the table.
5. Show how you arrived at the calculated output values. The
calculated output can be found as in figure 1 or you may
calculate the nearest 8-bit number to the analog voltage.
6. Note down output voltages for different combinations of
digital inputs and compare it with the theoretical value.

Result:

```
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
 views: 1 posted: 2/8/2013 language: Latin pages: 3