Docstoc

gappu

Document Sample
gappu Powered By Docstoc
					*******************************
Advance Turbo Flasher v8.80
*******************************

Release Date: May 31, 2012


Flashing Updates:
  --> Lumia Flashing Optimization for 610, 710, 800 and 900 Flash Files
  --> BB5 USB Flashing Default Timeout Corrections on RAPUYAMA Booting
  --> BB5 DUAL CPU New Protocol Flashing (N95, N95-8GB, N90 Etc) Speedup


Driver Updates:
  --> New ATF Box FTDI Drivers 2.08.24
  --> Nokia Connectivity Driver v7.1.78.0
  --> Lumia New WinUSB Drivers (32-Bit and 64-Bit)


Bug Fixes:
  --> DCT4 ASIC 2-5-6-7 Direct Unlocking Fixed for Custom Profile Bits




*******************************
Advance Turbo Flasher v8.70
*******************************

Release Date: April 25, 2012


Flashing Updates:
  --> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
  --> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639)
Flash File
  --> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640)
Flash File
  --> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95,
E90)
  --> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-
Activated
  --> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95,
N73, E90)
  --> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing
(N95-8GB, N95, E90)

Other Updates:
  --> Improved Drive Detection for ALL SYMBIAN APE Phones...
  --> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01,
etc..)
  --> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:

DCT4 Update:
  --> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR

Other Updates:
  --> New Products Added to Nokia.ini

Bugs Killed in this Update:
  --> Fixed SUB SCAN PHONE = PC Restart Bug on some AMD and Intel Core2
Computers
  --> Fixed USB Flashing "MCU CONFIGURATION IS NOT VALID"
  --> Fixed Battery Value 0 Error When Flashing via USB
  --> Fixed USB Booting Problem Delay on FUR
  --> Fixed FBUS Buscheck Timeout Delays (Faster Buschecks Now)
  --> Fixed Bug on Unsupported "NORMALIZE SUSD" Flash Files
  --> Fixed RAP3Gv3 FBUS Flashing Bug "Please Check RX2 Blah Blah..."
  --> Adjusted Infineon USB Flashing to exit properly during a Flash
Error



Special Thanks Goes To:

ashish_gsm <-- USB Scan Phone Surrogate PC for Debugging
MOYAL      <-- USB Scan Phone Fix Beta Tester



Some Clarifications:

1. Old Phones Can now be flashed with New Loaders and New Protocol (like
5130 and N95-8GB).
   But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these
Phones.

2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.

3. Nitro and Lightning users can now EASILY REMOVE Password from any SD
Card without buying
   or making an SD Card Cable Adapter. Simply put SD Card inside a S40
Phone like 5130c or
   X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT
Option to Format
   Drive E:... That is it!




*******************************
Advance Turbo Flasher v8.60
*******************************

Release Date: March 29, 2012
ATF Box New Firmware LogiCore 10.3.12 Official Release
  --> Fixes SD Card Slot Issues on ATF Big Chrome Boxes
  --> Enables the use of ATF SD Card Cable Accessory for ATF Lightning
and Nitro Boxes
  --> More Stable FBUS Flashing for RAP3Gv30 Phones
  --> 13% Speed Increase in Nitro FBUS Flashing
  --> 5% Speed Increase in USB Flashing (BB5, Infineon, MAEMO and MEEGO)


ATF New Driver for New Firmware
  --> New More Stable FTDI Driver Set for better Operation when used with
other GSM Boxes


Rapido "Boom   Boom Pow" Update
  --> (Boom)   First in the World RAPIDO Full RPL Certificates (NPC, HWC,
CCC and R&D)   Backup via USB Cable Only
  --> (Boom)   First in the World RAPIDO Full Flash Chip Reading via USB
Cable Only
  --> (Pow )   RAPIDO Phone Authorize using ATF Network via USB Cable Only*


ATF BB5 Software Enhancements:
  --> BUSCheck Button in USB Mode is now Enabled for ALL New Generation
Single CPU BB5 and Infineon Phones**
  --> Backup RPL Button in USB Mode is now Enabled for ALL New Generation
Single CPU BB5**
  --> Write RPL via USB is now Enabled for ALL BB5 RAPIDO Phones
(RAPIDOYAWEH not Supported)
  --> Write RPL via USB is now Enabled for ALL BB5 RAP3Gv40 Phones
  --> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v1.1 Phones
  --> Write RPL via USB is now Enabled for ALL BB5 RAPUYAMA v2.1 Phones
  --> Write RPL via USB is now Enabled for ALL BB5 BCM21351 Phones
(Broadcom)
  --> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPIDO
Phones (RAPIDOYAWEH not Supported)
  --> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAP3Gv40
Phones
  --> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA
v1.1 Phones
  --> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 RAPUYAMA
v2.1 Phones
  --> Custom Erase Flash Chip via USB is now Enabled for ALL BB5 BCM21351
Phones (Broadcom)
  --> Permanent Memory Area (PM) is now Initialized Before Writing
  --> Upto 7 Flash Files can now be displayed with Scrolling Down the
Flash File List
  --> VPL Details are now Displayed in the Main Log Window
  --> New button "Check" can now be used to determine whether your
Downloaded Flash files are corrupted or not
  --> Added Force 64K CNT Page is now Available in both FBUS and USB
Connections
  --> Original SX4 Server is now updated and fixed to v1.50 Protocol
  --> Software Logs for USB Flashing Phone #2 is now Saved
  --> Software Logs for SD BF is now Saved
  --> New Feature Decrypt PM 308 will decrypt all PM 308 blocks and save
it into a file


Micro SD Card Brute Force Module Update:
  --> Speed Cap for SD Card Bruteforce is Now Removed (Now you can BF
with MAXIMUM SD CARD SPEED***)
  --> Fixed Bug on Detecting Lock Status of some "non standard" Cards
  --> Enabled Option to use ATF SD Card Cable


General Software Bug Fixes:
  --> Enable Logging Option in Settings --> General Settings is now
Enabled
  --> Fixed Bug of UI Crashing when Flash File List is double-clicked
  --> Super Dongle Keys are now Checked Before getting access to use the
Original SX-4 Server
  --> Enabled WinUSB Driver detection and installation upon Program
Start-Up


Other Updates:
  --> Updated New Phone Models inside Nokia.ini



Notes:
    * ATF Network Activation is Required for Authorizing RAPIDO Phones
via USB Connection

   ** Single CPU means that the BB5 Phone does not have a separate APE
CPU.
      Examples of Dual CPU Phones: N95-8GB, 6630, N90, E90
      Rap3Gv3 Phones are not supported for USB Buscheck as well (5130c,
3110c, 7210c, 6300c)

  *** SD Card BF Speed Depends on the Actual SD Card. Speeds may vary
      from 45 passwords per second to 25,000 passwords per second.




*******************************
Advance Turbo Flasher v8.50
*******************************

Release Date: February 27, 2012


Windows Phone Lumia Flashing Engine Fully Supported
  --> FULL FLash Lumia 800, 800.2, 710, 710.1, 610 and other upcoming
Windows Phone Devices
  --> Firmware Downgrade supported for ALL Lumia Products
  --> Partial Flashing Supported for ALL Lumia Products (Skip User Area
Erase, Skip WPOS, Skip OSBL etc...)
  --> Supports Dead and Alive Phone
  --> Can Scan Live Phone
  --> Cross-Flashing Supported for Products with the same Roothash (710
<--> 710.1 or 800 <--> 800.2)
  --> Boot OSBL via NORMAL MODE Fully Implemented (No need to power off
phone)
  --> No need to press the VOLUME UP Button for Lumia 710 and Lumia 710.1
  --> If Factory Reset is Checked, USER AREA will be COMPLETELY Erased

micro   SD Card Password Bruteforce Now Implemented
  -->   Customizable Character Sets Available (small caps only, digits only
etc)
  -->   Supports all Types of micro SD Card from 32MB upto 128GB
  -->   Customizable Min and Max Length of Password Mask
  -->   Pause/Resume Supported
  -->   Automatically Saves RESUME File every 500 Passwords

micro SD Card Total Erase (Low Level Erase)
  --> Supports all Types of micro SD Card from 32MB upto 128GB


Bug Fixes:

  1. Fixed GUI Hang when FBUS Simlock Backup Fails at the Start of
Flashing.
  2. Fixed FBUS Booting when receiving receiving incomplete BB5 Boot
Code.

Other Updates:

  1. Added Complete New Product Listing Inside Nokia.ini
  2. Removed iTablets Legacy Flasher (iTablets and MEego are Now Fully
Inside BB5 Tab)
  3. Improved BB5 Product Scanning after a Complete Flash
  4. Updated Flash Loaders to stable 011.048.00 Set


Driver Info for Lumia Phones:

Drivers for Lumia (Nokia Mode) and Lumia (Zune Mode) can be found here:

C:\AdvanceBox Turbo Flasher\Driver\Lumia Phone Drivers\
C:\AdvanceBox Turbo Flasher\Driver\Zune Drivers\




*******************************
Advance Turbo Flasher v8.00
*******************************
Release Date: November 25, 2011


HARMATTAN (MEEGO) Flashing Engine Fully Supported
  --> FULL Flash N9-00, N950 and other upcoming MEEGO Devices
  --> Flash EMMC (Mass Memory)
  --> Secure User Data Erase (Removes Phone User Lock and Security
Settings)
  --> Supports Cold Flashing via "Skip ADL Chk" (Use only for non-booting
Devices)

Known Limitations about MEEGO HARMATTAN Phones (N9-00 and N950)
  --> Entire PM area is Write Protected... You can Read, but you cannot
Write back anything
  --> Security Code which is Read by ATF Software (PM 308,5) is NOT the
same as the PHONE LOCK Code
  --> When Phone goes to TEST MODE after flashing, it is Normal for ATF
to get an ERROR while
       reading IMEI and Simlocks on the First Read Attempt.
  --> It is not Possible to Downgrade the Firmwares on these phones. So
make sure that
       your required Language Pack Exist on the Highest Firmware Version
before
       attempting to Upgrage your phone.



Bug Fixes:

  1. FORCE Broadcom into TEST MODE is NO LONGER NEEDED!
     --> NORMAL MODE Decrypt PM 120 NOW FIXED
     --> NORMAL MODE Scan Phone Hang NOW FIXED
  2. Automatically Selects "Backup RPL" before Phone is Authorized via
USB Connection
  3. Time and Date Format for saving PM and RPL files FIXED
  4. ATF Support Site Login and ATF Network Login Delays FIXED
  5. Improved BB5 ENO Flashing for USB ADL (Rapido Phones)
  6. Re-Enabled SL3 to SL2 Downgrade Unlock for OLD HASH RAPIDO Phones




*******************************
Advance Turbo Flasher v7.90
*******************************

Release Date: November 4, 2011


BB5 Broadcom Independence Loader (First In The World)
  --> Decrypt PM 120 HASHES for ALL Broadcom BB5 Phones
  --> Bruteforce Unlock for ALL Broadcom BB5 Phones (via ATF Server or
via LBF Servers)
  --> Stand Alone Super Dongle Repair for ALL Broadcom BB5 Phones
  --> Stand Alone SX-4 Authorize for ALL Broadcom BB5 Phones
  --> Full Phone Authorization via ATF Network for ALL Broadcom BB5
Phones
  --> Read FULL NAND Chip Flash for ALL Broadcom BB5 Phones

Now The ATF Network Supports ALL BB5 CPUs Released By Nokia!!!


Here is a   List of Broadcom Based BB5 Phones:
  C3-00     RM-614
  X2-00     RM-618
  X2-01     RM-709
  X2-03     RM-709
  X2-01.1   RM-717
  2710c     RM-586
  7020      EM-497




*************************************************************************
*
*** IMPORTANT NOTES ABOUT BROADCOM AUTHORIZE PHONE VIA THE ATF NETWORK
***
*************************************************************************
*

1. Since NO other team can even Dream of releasing Broadcom Loaders
before ATF Team,
   all Broadcom Phones Authorized by The ATF Network will require 5 ATF
Network Credits.

   *** Note that it requires 5 ATF Network Credits and NOT 5 SL3 BF
Credits...

2. You NEED ATF Network Activation in order to:
   a. Authorize Phone
   b. Decrypt PM 120 Hashes for BF Unlock
   c. Stand Alone Super Dongle RPL Repair
   d. Stand Alone SX-4 Authorize

3. You DO NOT NEED ATF Network Activation if you just want to:
   a. Read FULL NAND Flash Chip and extract files etc...

4. If you Authorize a Broadcom Phone more than 1 time, then you will be
charged and
   charged again and again and again with 5 credits each time.

5. Some Broadcom Phones will get stuck when Reading Phone info in Normal
Mode.
   The correct way to do it is to change phone mode to TEST MODE before
attempting
   to Decrypt PM 120 HASHES, Super Dongle Repairs etc...

   Here is a QUICK way on How to Correct Set a Broadcom Phone into TEST
MODE from
   Normal Mode (RF Inactive) Condition.

   a. Put Battery to Phone and Power it On
   b. Connect USB Cable and Connect to PC
   C. Wait while Windows is Installing the Drivers...
   d. Go to ATF Software "Settings" --> "Nokia Settings"
      --> Put a check on "Skip Full Phone Information Sweep for BB5
Phones"
   e. Go back to "Nokia Service" and click Scan Phone...


   *** Once the phone is detected, you can select "Test" on that DropDown
      list on the LEFT SIDE of "Backup RPL" Button. This will make your
      Phone enter into TEST MODE....



*************************************************************************
*
*************************************************************************
*
*************************************************************************
*


What Else Is New?

N900 FIASCO Flashing has been moved from iTablets into the BB5 Section.
 --> Now you can Flash N900 just like any other BB5 Phone... Super EASY!
 --> The Current MAEMO Flash ENGINE does not support EMMC (VANILLA)
Flashing Yet,
     this will be Ported on the Next Update.


What was Fixed?
1. Infineon Self Test Hang on Exit: FIXED!
2. Box Activation (Activate New Box) FIXED!


Whats Up?
Try using the XFactor.skn   skin...   it Rocks!




*******************************
Advance Turbo Flasher v7.80
*******************************

Release Date: October 25, 2011

BB5 Major Functions Added:
  <<< All BB5 Flash Functions are now using the Newest Nokia Loaders
11.34.000.2 >>>

  * Authorize Phone for RAPUYAMA v2.1 Phones via USB or FBUS (Nokia 500,
600, 603, 700, 701 etc...)
  ---> SD Repair
  ---> Stand Alone SX4
  ---> Read PM 120 Hashes
  * Read Flash Enabled for RAPUYAMA v2 Phones via USB or FBUS (Nokia 500,
600, 603, 700, 701 etc...)
  * Read Flash Enabled for RAP3Gv30 Phones via FBUS Cable (5130c, 3110c,
7210c, 6300c etc...)
  * Read Flash 8MB Limitation on RAP3Gv40 Phones Removed... Now you can
Dump Full Flash Chip in 1 Session
  * Extract Phonebook Contacts from Symbian Belle Flash Dumps made by the
Read Flash Function
  * Write Full Nokia Original RPL for all BB5 Phones (SL1, SL2, SL3,
PA_SIMLOC30 15-digit and PA_SIMLOCK30 20-digit)
  ---> Write Simlock Data
  ---> Write Super Dongle Key
  ---> Write CMLA Key
  ---> Write WMDRM Key
  ---> Write PARTNERC (If Available)
  ---> Write MDM_KEYS (If Available)
  * N900, N950 and N9-00 Full PM Backup Fixed
  * Read / Write Product Profile Added
  * Added more Phone Modes for changing (Alarm, Charging, Discharging
etc...)
  * Added Ability to read Multiple MMC Passwords in 1 Phone (upto 16 MMC
Passwords)


SL3 BF Server Changes:
  * Reduced SL3 BF Price from 30 Credits to 25 Credits

General Updates:
  * Added New Products to Nokia.ini
  * Added Updated Provider Listing for MNC_MCC Codes
  * New Skins Added with Better Compatibility
  * Fixed FTDI Device Close problem on New FTDI Libraries
  * Mass Memory Flashing Automatically Switches to Turbo Mode when
needed.
  * Reads more Information from the Phone during Scan Phone (All
Information Available)
  * Fixed Problem for ATF Boxes which ask you to install Drivers each
time you Start ATF Software

Support Page Updates:
  * Added Credit Transfer for ATF Activation Credits
Driver Updates:
 * ATF Box Driver            v2.08.17(Beta)
 * Nokia Connectivity Driver v7.1.45.0
 * libusb Driver             v1.2.5.0


Update Summary:
 1. Uses Latest Nokia Loaders 11.34.000.2
 2. Can Authorize ALL BB5 Phones
 3. Can Read Flash Chip from ALL BB5 Phones except RAP3Gv2 (6630, N90,
N70... very old Phones)
 4. Can Extract Contacts from Symbian Belle Flash DUMPS
 5. Can Full Write Nokia ORIGINAL RPL



*******************************
Advance Turbo Flasher v7.70
*******************************

Release Date: August 24, 2011


BB5 Major Functions Added:
  * Read Flash Enabled for RAPUYAMA Phones via USB or FBUS
  * Read Flash Enabled for RAP3Gv40 Phones via FBUS and USB (USB Limited
to 8MB per Session)
  * Read Flash Enabled for RAPIDO Phones via FBUS ONLY
  * Extract Phonebook Contacts from Symbian ^3 and Symbian Anna Flash
Dumps made by the Read Flash Function
  * Supports International Unicode Characters for Contacts Extraction
(Chinese, Arabic, Thai etc...)
  * Recover Videos, Pictures, Music and Documents from ALL Flash Dumps
made by the Read Flash Function
  * BB5 Backup RPL Now Supported MDM_KEYS Certificate Backup and Writing

SL3 Bruteforce Server Added:
  * SL3 Bruteforce JOB Uploading is now OPEN to ATF Network Users (Paid
Service... Contact Your Reseller)
  * Upload JOBS, Cancel JOBS and Check JOB Status with just a click of a
button
  * Only accepts "JOB" files generated by ATF Software's Decrypt PM 120
Function


Infineon Major Functions Added:
  * Mass Memory (SD Card) Flashing Added for the NEWEST Infineon Phones
(C2-02, C2-03, C2-05, C2-06, C2-07 and C2-08)


Common Updates:
 * New BB5 Flash Loaders Version 11.24.000.3
 * New Nokia Connectivity Driver 7.1.42.0
Support Site Updates:
 * Special ATF ENO Files are NOW AVAILABLE for new RAPUYAMA PHONES (N8-
00, C7-00, X7-00, E7-00 etc...)
 * These ENO Fies were Dumped by the ATF Team and you can ONLY FIND them
at the ATF Support Site

Bug Fixes:
 * E6-00 and X5-01 Nitro Flashing Speed FIXED
 * Rapido ADL Flashing Bug for E71, E63 etc.. FIXED
 * USB ADL Flashing Format Partitions FIXED
 * BB5 Booting Speed FIXED
 * MMC Password Reading now Supports Unicode Characters


Frequently Asked Question:

Q: Do I need to pay ATF Network Activation in order to use the READ FLASH
Functions of ATF 7.70 ?
A: NO, this new Feature is FREE.

Q: Do I need to pay Credits if I want to upload a Bruteforce JOB File ?
A: Yes, Contact your Reseller for more Infomation.

Q: How Long Does it take to Read FULL Flash an N8-00 with a 1 Gigabyte
Flash Chip ?
A: Via USB, it will take about 12 minutes... Via FBUS, it will take MANY
+ MANY HOURS...

Q: Can I Read FULL Flash a 5130c or a 3110c Phone?
A: No. As of now, RAP3Gv3 Phones are NOT YET Supported... But it will be!

Q: Can I Recover My Contacts from a DEAD 5800 phone?
A: No, only Symbian^3 and Symbian Anna Flash DUMPS are Currently
Supported for Phonebook Extraction.
   We will first Support the Latest most HIGH END phones first before
proceeding to the OLDER Models.

Q: Will you support ALL Symbian S60 Contacts Recovery in the Next Updates
?
A: Yes, we will support them when we have more time.

Q: Can I recover Picture and Videos from my DEAD 5800 Phone ?
A: Yes, ALL BB5 Phone DUMPs are supported for FILE Recovery just as long
as they are not reformatted.

Q: I have a DEAD 5800 Phone and I have Flashed it a FEW TIMES already but
it is still dead... Can I still
   DUMP the Pictures and Videos from it?
A: Flashing will most likely REFORMAT the Phone... So your chances of
Retrieval are Lower. Then Best thing
   to do is to DUMP the Flash first before trying to FIX it via Flashing.
If the FILES inside the Phone are
   very important, then you should always AVOID Flashing before you try
to RECOVER the IMPORTANT FILES.

Q: Why is FBUS Flash READING VERY Slow and USB Flash READING VERY FAST ?
A: Because of HARDWARE Limitations on the FBUS Channel, the READ Speed is
severely Compromised.

Q: Can I READ Flash a Phone with a Special Language PACK inside and use
the Flash DUMP to put the
   Special Language PACK to my other Phones ?
A: This is possible, but it still REQUIRES you to have Knowledge on how
to convert BINARY DUMPS
   into FPSX Formatted BB5 Files.

Q: What is the MAIN PURPOSE of READ FLASH ?
A: To RECOVER IMPORTANT Files from a DEAD Phone... Just like RECOVERING
IMPORTANT Files from a CORRUPTED SD CARD.




*******************************
Advance Turbo Flasher v7.65
*******************************

Release Date: June 22, 2011

*** Minor Bug Fixes for 7.60 Release***

++   RPL Write Problem for OLD Protocol and RAPIDOYAWE Phones Fixed
++   PM Writing when PM files contains blank empty lines fixed
++   USB Booting on Rapuyama phones adjusted
++   RAPIDOYAWE Simlock RPL and SD RPL Data fixed


Known Issues:
* Mass Memory Files should be FLASHED separately and should NOT BE
Flashed
together with MCU, PPM or CNT files...




*******************************
Advance Turbo Flasher v7.60
*******************************

Release Date: June 21, 2011

*** Major Flashing Updates ***


Flashing Updates:
+++ BB5 Mass Memory Flashing   Enabled for FBUS New Protocol (Fastest In
The World)
+++ BB5 Mass Memory Flashing   Enabled for FBUS Old Protocol (Fastest In
The World)
+++ BB5 Mass Memory Flashing   Enabled for USB   New Protocol (Fastest In
The World)
+++ BB5 Mass Memory Flashing   Enabled for USB   New Protocol (Rapido)
(Fastest In The World)

+++ Infineon USB XG2130 Flashing Updated to support C2-00
+++ Infineon FBUS XG110 Flashing Updated to Support X1-00, X1-01
+++ Infineon FBUS XG101 Flashing Updated to Support New Loaders

+++ FBUS New Protocol Flashing Rewritten (Speed Increase)
+++ FBUS Old Protocol Flashing Rewritten (Speed Increase)

+++ Full Certificates   Backup for New Phones with 'PARTNERC' Certificates
(E6-00) (First In The   World)
+++ Full Certificates   Write for New Phones with 'PARTNERC' Certificates
(E6-00) (First In The   World)

+++ USB NON-ADL Flashing for Rapido Phones (Can Flash Totally Dead
Phones)


General Updates:
++ New Nokia FBUS and USB Flash Loaders (11.16.000.2)
++ New Nokia Infineon Static 'Buscheck' Loaders
++ New Nokia Connectivity Cable Driver (7.1.40.0)
++ New ATF Drivers Introduced (2.18.14)


Minor Bug Fixes
+ USB ADL Flashing Now 80% Faster Than Previous Versions (5130 full Flash
= 6:xx minutes)
+ 6500c CNT Flashing Problem Fixed
+ Big Flash Files 1GB upto 16GB is now supported (Dynamic RAM Allocation)
+ MMC Password is now saved before FULL Factory Reset is done on Normal
Phone
+ Life Timer Locations added for Newest BB5 Phones
+ Partition Block Parsing Fixed for Newest BB5 Phones
+ USB Full Phone Info Sweep Fixed for Symbian ^3 Phones
+ USB Phone Polling when Drivers are still Installing Fixed (Windows 7
32-bit/64-bit)


Known Issues:
* Rapido Mass Memory Flashing via USB should use "Skip ADL Chk" Option
* Some New RAPUYAMA Phones Cannot Be Flashed with "Nitro" Mode... Use
"Turbo" for E6-00 and X5-01...
* If you Get an Error Message Pop-up When you Close the Software, there
are 2 slutions:
--> Use iMetal Skin
--> Delete this File C:\AdvanceBox Turbo\Flasher\ImageIcon\atf_store.html
Update Summary:
1. Mass Memory Flashing for ALL BB5 Phones via FBUS or USB is 100%
Supported (First and Only In The World)
2. FBUS Mass Memory Flashing is Faster than FPS-21 and Phoenix USB !!!
(Fastest In The World)
3. All Currently Released Infineon Nokia Phones are 100% Supported and
Fully Tested (First and Only In The World)
4. Now You can flash Dead Rapido Phones (with fully erased PAPUBKEYS) via
USB



*******************************
Advance Turbo Flasher v7.50
*******************************

Release Date: May 13, 2011



+   RAPUYAMA ALL HASHES via USB Cable ONLY !!!
+   RAP3Gv4 ALL HASHES via USB Cable ONLY !!!
+   Stand Alone MASTER CODE to NCK Calculator
+   Bug Fixes for v7.49


Good News to ALL ATF Users who ACTIVATED Their Boxes for The ATF
Network!!!


ATF 7.50 Unleashes the Power of Normal USB Cables by supporting
ALL RAPUYAMA and RaP3Gv4 Phone Maintenance via USB Cable ONLY!



Now you don't have to worry about:

1. FBUS Cables with Wrong Pinouts
2. FBUS Cables with missing RX2 Pins
3. FBUS Cables with missing Filter Pins
4. FBUS Cable Converters/Adapters for Multiple Boxes
4. FBUS Cables with Poor Quality Wires
5. FBUS Cables that requires you to Disassemble the Phone (C7-00 and N8-
00)
6. RAPUYAMA Phones without FBUS Pinouts (E7-00)


No more Headaches... Just use the USB Cable that came with the Phone!



ATF First In The World Unique Features for USB Only Connection:
1. USB Only   Phone Authorization via The ATF Network
2. USB Only   Stand Alone Decrypt PM 120 HASHES for PA_SL3 and PA_SIMLOC30
Phones
3. USB Only   Stand Alone Super Dongle Repair for PA_SL3 and PA_SIMLOC30
Phones
4. USB Only   Stand alone SX-4 Custom Keys Authorization for PA_SL3 and
PA_SIMLOC30   Phones


PM 120 HASH Decryption is always VERIFIED WITH RSA!!!
100% Guaranteed that the Extracted HASHES are Correct (Not like other
tools)


STOP WASTING TIME/ELECTRICITY/CREDITS because of WRONG HASHES !!!

Join The ATF Network Today for just 49 Credits!


Now   you don't have to Disassemble C7-00 Phones...
Now   you don't have to Disassemble N8-00 Phones...
Now   you can already unlock USB Only RAPUYAMA Phones (E7-00)... (First in
The   World)


Be Professional... Be Ahead... Be ATF !!!


A.T.F... Always The First!




*******************************
Advance Turbo Flasher v7.49
*******************************

Release Date: May 5, 2011


For a 1 time Activation of 49 Credits, Joining The ATF Network
will allow you to perform UNLIMITED TASKS to ANY BB5 FBUS HASH
for all BB5 Phones with FBUS Connection in Planet Earth...


Update and Activate to ATF v7.49 Now and Enjoy the following supported
TASKS:

* Unlimited SL3 PM 120 HASH Decryption for ALL NEW HASH BB5 Phones with
FBUS Connection
* Unlimited SL2 Direct Unlock for 6120c, 6760s and 6790s NEW HASH
479Cxxxx Phones
* Unlimited Super Dongle Repair for ALL NEW HASH BB5 Phones with FBUS
Connection
* Unlimited SX-4 Authorization (CUstomized Keys) for ALL BB5 Phones with
FBUS Connection
* Unlimited SL3 Downgrade for phones with ENO files available


Activate Now and get a chance to Participate and WIN FREE RAPIDO NEW HASH
Unlocking!!!


Special SL3 LBF Tools for Hashcat v0.05 by atom on v7.49
* Supports Manual IMEI and HASH input or input via LOG files (*.log,
*.bcl and *.sha)
* Resume or Skip Brute Force Jobs at any Percentage % you want
* Divide Brute Force Jobs to 2, 3, 4, 5 or 10 Super Computers
(Distributed Cracking)
* Specify Temperature Limit (85, 90, 95, 100 or NO LIMIT)
* Improve your BF time by guessing ODD or EVEN for last digit in the
Master Code!


General Updates Added on v7.49
* Infineon X1-00 RM-732, X1-00.1 RM-733 Flashing Support Added
* Fixed FTDI Read Timeout Bug on BB5 OLD LOADER + OLD PROTOCOL Flashing
* Self Test Status Report Updated


Additional Information:
* For End users who paid 99 Credits for ATF Network Activation since
March 2011,
  you will all get a 50 Credits Rebate which will be delivered back into
your
  account within 24 hours.




*******************************
Advance Turbo Flasher v7.40
*******************************

Release Date: April 5, 2011

DCT4 Updates:
  Stand Alone RPL Calculation via "REPAIR IMEI" button for ALL DCT4
Phones ASICs (2, 5, 6, 7 and 11)
  Master Code Calculator Version 2.0 can now Correctly Calculate the 10-
digit Master Code for ALL DCT4 PHONES

BB5 Updates:
  Stand Alone BB5 SL3 15-digit NCK Calculator for ighashgpu Brute Force
Result
  PA_SIMLOC30 NCK Code Sending now supported for New 20-digit Code
  RAPUYAMA and RAP3Gv40 Booting Fixed

Common Changes:
  Fixed Full Factory Settings Command
  Fixed Product Search and Phone Search Menu
  Self-Test Actual Status is now Displayed

Notes:
  *** It is advised that you should use iMetal_Dark.skn

     1. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your
Virus Scanner Excemption/Exclusion List of Trusted Applications
     2. YOU MUST Add "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your
Windows Firewall Excemption/Exclusion List of Trusted Applications
     3. DO NOT disable the Microsoft Windows Firewall!!!
     4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and
get information on how to add AdvanceBox.exe to the Excemption/Exclusion
List
     5. Make sure you have done Steps 1-2-3-4




*******************************
AdvanceBox Turbo Flasher v7.20
*******************************

Release Date: March 9, 2011

*** Freeloaders for RAPUYAMA and RAP3Gv40 Phones Released ***

Freeloaders are 100% Stand Alone loaders that allow you to perform
Super Dongle Repairs, SX-4 Authorization and PA_SL3 or PA_SIMLOC30
PM 120 HASH Decryption. These Loaders DO NOT need an ATF Network
Account or Credits. It is completely Stand Alone just like the other
OLD Hashes.

RAPUYAMA Phones Currently Supported: ROOT HASH =
25B977A055BE9B5DEC0C38A2A279C695

E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)


RAP3Gv40 Phones Currently Supported: ROOT HASH =
7B045400E1752022F9EB80B0DEA9C65D
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)

======================================================================
The Phones listed above do NOT require Credits or Internet Connection.
======================================================================

For NEW RAPUYAMA and NEW RAPIDO Phones, you STILL need to have an
ACTIVATED
ATF NETWORK Account and 5 Credits for each New Phone you want to
Authorize.



*** PA_SIMLOC30 HASHES are now Supported for PM 120 HASH Extraction ***

Tested on "REAL" PA_SIMLOC30 Phones: X3-02 RM-639     and C2-01 RM-721




*******************************
AdvanceBox Turbo Flasher v7.10
*******************************

Release Date: March 7, 2011

*** SL3 Local Brute Force for ALL BB5 HASHES vis FBUS Cable

*** SL1/SL2 Stand Alone Unlock and Rebuild Simlocks via Simlock RPL


Requirements For Service:

  You need to have an ACTIVATED account in The ATF Network if your phone
is NEW HASH.
  Authorization Cost for EACH NEW HASH Phone is still just 5 Credits

  After phone is AUTHORIZED, you can do the following tasks in Stand
Alone Mode:
   1. Super Dongle Repair
   2. SX-4 Stand Alone Authorization
   3. Decrypt SL3 PM 120 HASHES

Supported BB5 New HASHES via FBUS (Cost 5 Credits):

       479C6DDE3942E12C429C1D6ADED803710E52EBD3
       C70CB07324056BC66A824347F40DB2D5E198D1B2
       916F75217F32081248B15C38DFC8E81B1803F26F
       25B977A055BE9B5DEC0C38A2A279C6958594B998
       7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
       928E5FFB88D81E5F74729A212AB9D12EC755ED14
       2C05369F57CC3C4CF9E783E83D9B512B53E28D99
       3AB5DB70B45D23F1ADEEBB5734160706668138E1
       2B910DA4E0FBEFFFE5C65D3682854636C02881F7
       68597B9162BAB81AF74C56E78EA2588F2D968376
       EA81B32860B86EF4231A11831045F3E6AE071379
       8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
       DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
       B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
       B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
       46802B476C93A05CBAF76A64752086A9A7320E5C
       1B0D74C532CA1C6133940C740E8C786E49B99671
       700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
       87FAC992288DA497A663E5DDC0410B11521B8D0C
       55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
       49A97E826B93BA20B7ED0B082475C0056EBB8F8D
       FEA0F9E21EF50B836924A9F25D85C643D8514505


Supported BB5 OLD HASHES via FBUS (100% FREE and DOES NOT NEED ATF
NETWORK ACCOUNT)

       38F312750F686F9FC9B1B3778774A195
       9A28E119033B91D14D22838C86D0D53C
       9DDBFCFE6E73CED7D8C6268C8EB85723
       A5404AE83A594ECADEE532F0C236BFA6
       BAF3A9C3DBFA8454937DB77F2B8852B1
       CAEEBB65D3C48E6DC73B49DC5063A2EE
       E9EFF4BFAA5393217CA6B17755FC3E14
       F2D76DFAFD66C7F195F278417DF05888
       F682624FFB08F6D955DBE7D9C0485084
       FCB5C510AF7F09F313D9BDE85A707CC0




*******************************
AdvanceBox Turbo Flasher v7.00
*******************************

Release Date: March 2, 2011

The ATF Network Launched!

ATF Team Launches the New ATF Network with Cutting Edge Services
that will help you become a step ahead of your competition.


[Super Dongle Repair for ALL SL3 Phones]
ATF Team is Proud to present to you SL3 Super Dongle Repair for
ALL BB5 Phones in the Market via the "Phone Authorization" Service
offered by The ATF Network (FBUS Cable Required).
This Unique service allows you to Fix Super Dongle problems on ALL
BB5 Phones and it will even allow you FULLY DOWNGRADE any BB5 Phone
to any compatible Firmware Version you want.

All you need is to activate your ATF Network account and start using
ATF Credits so you can finally Repair all the NEW Phones in the Market!!!


[SX-4 Stand Alone for ALL SL3 Phones]
Through the "Phone Authorization" Service of The ATF Network, you can
also enjoy stand Alone SX-4 Authorization for ALL SL3 Phones in the
market.



Q: What is Phone Authorization?

A: Phone Authorization is a Service Offered by The ATF Network that will
allow you to utilize more Repair Options for ALL SL3 Phones in the
Market.

Once a Phone is "Authorized", Super Dongle Repairs and SX-4 Authorization
can be performed via Stand Alone Mode.



Q: Which Phones are supported?

A: All BB5 Phones are supported, but currently it only supports FBUS
Connection.
USB Connection "may" be supported in the future, but we still do not have
a definite date for this to happen.



Q: Is the "Phone Authorization" Service Free?

A: No, it is not free. You need to purchase ATF Credits from your nearest
ATF Reseller. You will first need to Create an ATF Network Account, then
you can start using our Phone Authorization service for merely 5 Credits
Per Phone. (5 credits is about 5 U$D).



Q: So ALL phones needs to be Authorized now?

A: No, you ONLY NEED to Authorize the New BB5 Phones which have New
HASHES
that are NOT Supported by any other Team in the world. If your phone is
using OLD HASH, then you can still work with it without paying for
Authorization.
Q: Why do I need to pay for this service? I want free!!!

A: If you promise to Repair all your Customer's Phones for FREE, then we
will give you a free Activation for the ATF Network and some FREE Credits
so you can Authorize Phones for free. But do not forget, you also need
to repair ALL PHONES in your shop for FREE! Do you agree? Email us
if you agree to repair phones for Free.



Q: How Many times do I need to Authorize the Phone?

A: You only need to Authorize the phone 1 time. Once it is authorized,
you
no longer need to perform authorization again.



Q: Can you repair Simlocks and IMEI from 100% erased SL3 and SIMLOC30
phones?

A: No. We cannot repair or regbuild Simlocks for SL3 and SIMLOC30 phones.
You
can only repair these phones if you have a PM 120 Backup and an RPL
Backup.



Q: Can I SD Repair and Authorize new SIMLOC30 phones?

A: YES, YES, YES... The ATF Network Supports ALL BB5 Phones in the
Market.
You just need to use FBUS Connection if you want to Authorize Phones.



Q: which NEW HASHES are currently Supported by The ATF Network?

A: The ATF Network currently supported ALL 22 New HASHES released
as of March 1, 2011.

       479C6DDE3942E12C429C1D6ADED803710E52EBD3
       C70CB07324056BC66A824347F40DB2D5E198D1B2
       916F75217F32081248B15C38DFC8E81B1803F26F
       25B977A055BE9B5DEC0C38A2A279C6958594B998
       7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
       928E5FFB88D81E5F74729A212AB9D12EC755ED14
       2C05369F57CC3C4CF9E783E83D9B512B53E28D99
       3AB5DB70B45D23F1ADEEBB5734160706668138E1
       2B910DA4E0FBEFFFE5C65D3682854636C02881F7
       68597B9162BAB81AF74C56E78EA2588F2D968376
       EA81B32860B86EF4231A11831045F3E6AE071379
       8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
       DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
       B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
       B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
       46802B476C93A05CBAF76A64752086A9A7320E5C
       1B0D74C532CA1C6133940C740E8C786E49B99671
       700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
       87FAC992288DA497A663E5DDC0410B11521B8D0C
       55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
       49A97E826B93BA20B7ED0B082475C0056EBB8F8D
       FEA0F9E21EF50B836924A9F25D85C643D8514505


OLD HASHES are also supported, but you DO NOT NEED The ATF Network for
OLD HASHES!!!




Q: How much do I need to pay to Activate my ATF Network Account?

A: You need 99 Credits (almost 99 U$D) to Activate your ATF Network
Account.
Then you will only need to spend 5 Credits (5 U$D) for EACH Phone you
want to Authorize.



Q: Do I need Internet Connection to connect to the ATF Network?

A: Of course dear :O) But the good news is, after you have successfully
Authorized your phone, you do not need the internet connection anymore
to perform SD Repairs and SX4 Authorization. It will be Stand Alone.



Q: How long do I need to wait before my phone is Authorized?

A: Average time is 10 to 20 seconds, depending on your Internet
Connection.



Q: Ok last question, do you support the E7-00 which is the NEWEST BB5
Phone in the Market?

A: Yes, E7-00 HASH is supported by The ATF Network... However, you first
need to find an
FBUS Cable for E7-00 beause The ATF Network DOES NOT SUPPORT USB
Connection as of the
moment.

USB Connection will be supported in the future, but we cannot give you an
actual date
on when it will be released.
*******************************
AdvanceBox Turbo Flasher v6.60
*******************************

Release Date: February 8, 2011

Common Changes:
  * New LogiCore 9.02.10 Firmware for ATF Chrome (Big ATF) and ATF
Lightning (Small ATF)
  * Updated Nokia.ini with very old and very new Phone listings
  * New Nokia Connectivity Driver 7.1.36.00
  * Update Important Files Button is now RE-Activcated (Updates Loaders,
PM, DCC files etc...)
  * Built-In Log File Viewer can now View the Current Session
  * Full Package Flash File Download Server automatically selects non
BUSY servers
  * Fixed USER.INI files loading Bug (This also fixes Manually Loaded
flash files)
  * Added Manual Selection of BOX TYPE for Restore Box Function
  * Updated the SKINS for the Software Interface

BB5 Changes:
  * Stand-Alone Super Dongle Keys Repair for all phones with Supported
HASH
  * Stand-Alone SX-4 Authorization for all phones with Supported HASH
  * FBUS Loaders Updated to Release 10.50.000.1
  * Original Dynamic camera Configuration Files (DCC) Compatibility
  * Automatically Fixes DCC Problems using Original DCC files (not PM
Files)
  * Erase Flash Chip can now SCAN active Flash Chips and automatically
Erases Selected Flash Chips
  * CMT and APE PAPUBKEYS are now Compared during Buscheck (just in case
it was damaged by other Boxes)
  * Flash Loader Information (Version, Revision, Protocol Type) are now
Displayed during Buscheck
  * Added Manual ERASE PM 1 and PM 309 file: ERASE_1_309.pm
  * Added New Detection Method for 64k page Flash Chips for 5130c, 3110c
etc...
  * By Default, RAP3Gv30 New Loaders are not used unless ENABLED in
Expert Settings Menu
  * Fixed Old Protocol + Old Loaders flashing for N95, N95-8GB and other
Phones with Secondary APE CPU
  * Backup Certificates (RPL) for APE Subsystem is now Enabled

iTablet Changes:
  * Now Supports EMMC Flashing for N900 RX-51 Variants

Infineon Changes:
  * C1-01 and other Infineon USB Phones can now be flashed with PPM and
CNT files only. This
    will save you some time if you want to skip MCU Flashing. Just make
sure that the currect
    MCU Firmware version matches the PPM and CNT files you want to
upload. Actually, you can
    skip CNT flashing as well if you only want to change the Language
Pack.

DCT4 Changes
  * Original Dynamic camera Configuration Files (DCC) Compatibility
  * Automatically Fixes DCC Problems using Original DCC files (not PM
Files)


TIPS and Tricks:
  * Before Installing ATF Software 6.60, Uninstall ATF Software 6.50

  * Before Updating your Box Firmware to LogiCore 9.02.10, make sure you
have:
     1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus
Scanner Excemption/Exclusion List of Trusted Applications
     2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows
Firewall Excemption/Exclusion List of Trusted Applications
     3. DO NOT disable the Microsoft Windows Firewall!!!
     4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and
get information on how to add AdvanceBox.exe to the Excemption/Exclusion
List
     5. Make sure you have done Steps 1-2-3-4

  * For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use
"Old Loaders" for Flashing.
    Using "New Loaders" for N95 flashing is 100% safe, but depending on
your CABLE QUALITY, you
    might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE
(Ready)". If you do get stuck,
    then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection
--> Old Loaders



*******************************
AdvanceBox Turbo Flasher v6.50
*******************************

Release Date: January 17, 2011

Common Changes:
  * Official Support for ATF Lightning Boxes
  * Removed Update FTDI EEPROM Button (v6.50 Software will automatically
Fix/Update your FTDI EEPROM if Needed);
  * Automatic Activation for "Extension Port" and Infineon FBUS
  * Fixed BOX_SN: 00000000 Problems when displaying the Secondary Serial
Number
  * Added New Products to Nokia.ini

Infineon Changes:
  * Infineon XGOLD213 USB Flashing Supported (C1-01, C1-01.1 ,C1-02, C1-
02.1, C2-00, C2-00.1, etc...)
  * Infineon XGOLD213 Lifetimer Reset Automatic Detection Supported
  * Infineon 1202/1203 (RH-111) TEST MODE Bug Fixed on ATF Lightning

BB5 Changes:
  * FBUS Loaders Updated to Release 10.48.001.2
  * Symbian^3 Lifetimer Reset Fixed (C7-00, N8-00, E7-00, etc...)
  * 2nd Time Buscheck Bug Fixed for ATF Box NEW PCB
  * RAP3Gv30 New Protocol Loader Supported for NOR Based BB5 Phones
  * RAP3G RPL Erasing/Writing Fixed using New Loaders
  * 5130c Read Info Crash after Flashing Fixed
  * 3110c and 5130c New Intel Flash Chip Fully Supported using New
Loaders
  * SL1/SL2 Simlock Rebuild OFFLINE Method Fixed



*******************************
AdvanceBox Turbo Flasher v6.30
*******************************

Release Date: December 24, 2010

Common Changes:
  * Added New Products to Nokia.ini

DCT4 Change Logs:
  * New DCT4 Booting Procedure now compatible with any USB Hardware Chips
(ICH7 etc)
  * Adjusted Secondary Loader Sending Speed during Buschecking and UEM
Writing
  * Write RPL Timeout Delay was increased

Common Software Change Logs:
  * "Regular PCB" and "Modified PCB" can now be selected before clicking
"Restore Box"
    This is useful for end users who has accidentally writen the wrong
firmware to their box

Flash File Server Change Logs:
  * New Authentication Scheme for easier user access
  * Download Activity Logging (IP Address, Box ID)



*******************************
AdvanceBox Turbo Flasher v6.10
*******************************

Release Date: December 7, 2010
Common Changes:
  * Application GUI is now locked to 800x600 resolution (slightly bigger
than before)
  * Added New Products to Nokia.ini
  * Update File Path was changed (will be enabled in Server side)

DCT4 Change Logs:
  * New DCT4 Booting v2 with better compatibility with Desktop PCs and
ICH7
  * DCT4 Write RPL Speed was adjusted for better compatibility with very
Slow UPPs
  * Fixed Server Bug on DCT4 RPL Credits Counter

BB5 USB Change Logs:
  * Original SX4 Card Authorization via Server is now Enabled in USB Mode
  * Life Timer Tuning is now enabled in USB Mode (Supports Broadcom and
Rapuyama Fields as well)
  * Customized PM Programming is now Enabled in USB Mode
  * Extended Self-Tests and Test-Scan is now Enabled in USB Mode
  * PM Full Writing on non write protected fields are now enabled in USB
Mode
  * Read Memory Card Password is now added for USB Mode
  * Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for USB
Mode
  * Manual Send Unlock Codes is now enabled in USB Mode
  * Automatic Life Timer Reset to 0000:00 when Factory Reset is selected
during USB Flashing
  * Write New Product Code is now enabled in USB Mode
  * Super Dongle Validity Check is now enabled in USB Mode

BB5 FBUS Change Logs:
  * Life Timer Tuning is now Supports Broadcom and Rapuyama Fields
  * Read Memory Card Password is now added for FBUS Mode
  * Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for
FBUS Mode
  * Automatic Life Timer Reset to 0000:00 when Factory Reset is selected
during FBUS Flashing


Just some more notes...

  1. If MMC Password is available, it will be saved during Simlock Backup
as well.
  2. FBUS Loaders are still the same as the 6.00 release which is
10.42.000.7
  3. USB flashing for Broadcom Phones just takes 8~9 seconds (tested on
X2-00, C3-00, 2710c and 7020)
  4. Life Timer Tuning AUTODETECTS the correct Fields for every BB5 Phone
Released upto Today (First in the World)
  5. Always add -->   C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your
Virus Scanner EXCLUSION LIST
  6. Always add -->   C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your
Windows Firewall Trusted Applications List
  7. This Software Release still uses LogiCore 8.15.10, so there is NO
NEED to Update the Firmware if you already have
     this firmware version.



*******************************
AdvanceBox Turbo Flasher v6.00
*******************************

Release Date: November 11, 2010

Change Logs:
  * New LogiCore 8.15.10 Box Firmware
  * New BB5 Loader Package Version 10.42.000.7
  * Added DCT4/DCT4+/DCT4++ RPL Server (FREE, NO NEED ACTIVATION)
  * Added DCT4 Manual Erase Option
  * Added Auto Selection of Flash Chip Size for Manual Erase
  * Fixed BB5 APE NAND Erasing Bug with New Loaders
  * New Nokia Connectivity Driver for USB
  * Added Skip Read Papub option for USB Flashing (usefull for dead phone
flashing)
  * Added New Products to Nokia.ini



*******************************
AdvanceBox Turbo Flasher v5.90
*******************************

Release Date: October 26, 2010

Change Logs:
  * New BB5 Loader Package Version 10.34.1.3
  * DCT4 RPL DATA1 is Backuped Automatically in First Instance of "Scan
Phone"
  * Security Code read attempt during "Scan Phone"
  * Read Phone Mode on "Scan Phone"
  * Read Dynamic Camera Configuration on "Scan Phone"
  * Full Logs option for Booting BB5
  * Fixed DCT4 Local Mode on Live DCT4 Phones when First Connected to Box
  * Fixed DCT4 Long Boot
  * Autodetect and Autoswitch Between BB5 and DCT4 Products according to
Phone Connected
  * Software will always select the Highest Firmware available on your PC
  * Manual and Auto Detect of VCCIO Levels
  * Support for DCT4 "ini" Files which are older than DP Version 2.0
  * Quick Fix for SL1/SL2 Downgrade Fix
  * Fixed Default Directories for Manually Adding Flash Files
  * File System Format for BB5 Phones
  * Corrected SL3 Type Simlock Reading on Buscheck
  * Shows Deep Scan Info for BB5 Phones
  * Local Storage for Unique ID's Read from Supported Phones
  * Manual Erase Flash for BB5 Phones (NOR or NAND + CMT or APE)
  * Infineon New Loader Support
  * Fixed FBUS UART Reading/Writing with Better Timing
  * Improved Speed for BB5 USB Flashing on RAPUYAMA, RAP3Gv4 and BroadCom
Phones
  * New Phone Connectivity Drivers Included
  * Dynamic Camera Configuration Reading and Writing Fixed for non
standard DCC Files


*******************************
AdvanceBox Turbo Flasher v5.70
*******************************

Release Date: August 24, 2010
ATF 5.70 Multi-ATF Box Update


Multi-ATF Box Flashing
  Now you can use more than 1 ATF Box on 1 PC
  The Number of Boxes is limited only with PC's Resources/Performance
  So it is possible to connect 10, 20, 100 etc... Boxes if your PC can
handle it

  ** We Strongly Suggest you should use a USB HUB with an External
  ** Power Adapter with about 2A or more Power to give.
  ** Check out www.blue2.cn for the 10 Port USB we have tested


Bugfixes:

  [CNT Flashing S40 Fixed]
  Missing Calculator, Themes and Other CNT Apps for S40 phones
  are now fixed. We have tested 6300 and 3110c Phones.
  In USB Flashing Mode, you can Force 128K CNT for DEAD USB Mode.
  Only use this option if something is missing inside the Phone
  after flashing. Otherwise, leave this option unchecked.

  [User.ini Handling Fixed]
  Files that cannot be found inside the default paths are now
  accessible when saved inside the User.ini.
  User selected files are saved inside User.ini and WILL NOT BE
  overwritten with new installations above 5.60.

  [GUI USB Disabled Fixed]
  After selecting DCT4 and going back to BB5, the USB option is
  again enabled.


*******************************
AdvanceBox Turbo Flasher v5.60
*******************************

Release Date: August 19, 2010
ATF 5.60 Dual USB Update
ATF Multi-USB Mode Flashing
  Flash TWO BB5 Phones at the   same time
  The Phones can be different   models or the same model
  The Phones can be "DEAD" or   "ALIVE"
  This option saves you a lot   of time and it is very EASY and SAFE to use

ATF USB Flashing uses the latest Flash Loaders and Flash Protocols
  There is no need to select OBSOLETE "Old Protocols"/ "Old Loaders"
  All New Phones are Supported

ATF USB RPL Backup
  Creates RPL Backups for Supported Phones via USB
  Supported Phones are ALL BB5 RAPUYAMA, RAP3Gv4 and BroadCom based
Phones
  No other 3rd Party Software in the world can do this

Unique USB Flash Procedure
  ATF is rewriting the way USB Flashing is Done
  ATF does not follow the Standard USB Flashing done by other Softwares
  ATF uses a different approach to make USB Flashing SAFER and EASIER
  Bulk ERASE and Bulk WRITE MODES are not used and this increases the
  compatibility on the latest phones with 5 or more Flash Files
especially
  phones with ENO Packages.


General Updates:
  Infineon Phone C1-00 RM-689 Now Fully Supported
  BroadCom "USB Only" Phones Now Fully Supported
  Update Important Files Button added for Minor Updates
  Skin Resolution Increased
  DCT4 Booting and FBUS Scanning was Improved



*******************************
AdvanceBox Turbo Flasher v5.55
*******************************

Release Date: July 14, 2010
ATF 5.55 Optional Update

ATF Optional Update - New Flash Loaders 10.22.000.2


Note:
  This Update is Optional and it is only for End Users
  who always want to use the Latest Flash Loaders available

  The software version is 5.55, and after you update we
  strongly suggest that you perform a "Restore Box" so we
  can guarantee that you are using the latest version of
     the compiled LogiCore 7.07.10 Firmware.


Bug Fixes Inside:

1.   BB5 Read ASK is now enabled
2.   Pooling Phone timmeout is now 3 times longer
3.   Server access is now using IP addresses instead of domain names
4.   Simlock Server Version reading is now Skipped




*******************************
AdvanceBox Turbo Flasher v5.50
*******************************

Release Date: July 07, 2010
ATF 5.50 Update

     First Third Party Box to add Support for the Latest
     Nokia Flash Loader Pacakge 10.20.001.6 (May 18, 2010)

[New FPGA Firmware]
  LogiCore 7.07.10

[BB5 Nitro Engine]
  Now using the Latest Flash Loader Package 10.20.001.6

[BB5 Turbo Engine]
  Now using the Latest Flash Loader Package 10.20.001.6
  Now using a more stable RAP3GV2 and V3 Loaders

[DCT4 Engine]
  Booting Problem Fixed for DCT4+/DCT4++ Phones

[General Fixes and Tweaks]
  Quick Access "Backup RPL" Button is now on the Main Software Page




*******************************
AdvanceBox Turbo Flasher v5.40
*******************************

Release Date: July 01, 2010
ATF 5.40 Update

     ATF Super Speed Flashing (Nitro Mode)

     First Third Party Box to add Support for the Latest
     Nokia Flash Loader Package 10.18.000.1 (April 30, 2010)
[BB5 Nitro Engine]
  Introducing Nitro Mode Flashing for BB5 NAND Phones
  60% Faster than Turbo Mode Flashing
    examples:
      Full Flash X3 in 15 Seconds (boot-erase-flash)
      Full Flash 6120c in 23 Seconds (boot-erase-flash)
  Uses The Latest Flash Loader Package 10.18.000.1

[BB5 Turbo Engine]
  15% Speed Increase than the previous Turbo Flashing
  Uses Older Loader Package 09.xx.xxx.x for assured full
  compatibility with previous releases...

[General Fixes and Tweaks]
  Entire FBUS Protocol Handling was Reworked
  Added "SD Check" (Super Dongle Key) for All BB5 Phones
  User Ini File Selection Bug Fixed
  Non Conventional VPL and INI file now supported
  Added Data Integrity Check on BB5 RPL Backup Process
  800 x 600 NetBook Screen Resoution is now FULLY SUpported
  Added Simlock Security Type Test on BB5 Buscheck Button

[Server Services]
  SX4 PM AUTHORIZATION Engine was Completely Reworked
  BB5 Unlock/Relock Engine was Complete Reworked
  Server Based Tasks are now more "User Friendly"

  Two New Flash File Servers are now Online
    Mercury : New Lease
    Venus   : New Lease
    Mars    : Renewed Lease (www.super-key.com)

  Additional 1.5 GB Bandwidth for Special Modified Boxes
  is now Set on the all Servers.




*******************************
AdvanceBox Turbo Flasher v5.30
*******************************

Release Date: June 01, 2010
ATF 5.30 Update

  ////////////////////
 // General Update //
////////////////////

Flash File Download Support Finally Launched !!!

  FULL PACKAGE Flash File Installers
  FULL Service Manuals for Levels 1,2,3 and 4 (most BB5 Phones)
  FULL Schematics (most BB5 Phones)
  SINGLE VARIANT Flash File Download (Similar to NAVIFIRM)

  End user can choose between downloading the FULL Pacakge Flash File
  or just downloading only specific variants.

  Each Activated ATF Box is entitled to access the MOST complete and UP-
TO-DATE
  Flash Files for BB5 with 3.0 GB Bandwidth allocation per month.


New Server Lease for Activation Servers / NCK Unlock Servers / Custom SX-
4 Servers

Software Window Size was adjusted to allow compatibility on PC's with low
desktop
video resolution.

Success Sound Customization is now Enabled. Make sure success sound wav
file is
atleast 5 seconds in duration.


  ///////////////////////////
 // DCT-4 Infineon Update //
///////////////////////////

Added "Live Phone" booting option for XGOLD 101/102 and XGOLD 110 phones.

  Live Phone Booting is used to improve compatibility with 1616-2 and
1800 phones
  that come from U.A.E.... These phones usually have "Made in India" in
the back
  sticker as compared to "Made by Nokia" in most 1616-2 and 1800 phones.

  Live Phone option can be found beside the "SCAN PHONE" button and it is
NOT
  enabled by default.


  ///////////////////////
 // ATF Driver Update //
///////////////////////

The 5.30 installer is now equipped with the latest FTDI 2.06.02 Drivers.

  Never overwrite new FTDI drivers when you are trying to install other
boxes like
  JAF, UFS etc... Old Boxes will work 100% with the latest FTDI drivers.
But if you
  put old FTDI Drivers, then ATF Box will not function anymore.

  Always check your driver version... Usually JAF and UFS drivers are
from 2006...
  Now is 2010 already, so please STOP LIVING in the past ;o) Use 2010
drivers because
  you are now living in year 2010.




*******************************
AdvanceBox Turbo Flasher v5.20
*******************************

Release Date: May 28, 2010

  //////////////////////////
 // DCT4 Infineon Engine //
//////////////////////////

First in the World 3rd Party Box to Fully Support FULL Flashing,
DEAD PHONE Flashing and CROSS Flashing DCT4 Infineon Chipsets Supports
ALL DCT4 Infineon Phones in the Market !!! (Original Nokia Phones Only)


Current DCT4 Infineon Phones:

  1202 (RH-111) XGOLD 101/102
  1203 (RH-111) XGOLD 101/102
  1280 (RM-647) XGOLD 110
  1616-2 (RH-125) XGOLD 110
  1800 (RM-653) XGOLD 110

Partial Flashing (PPM and CNT only) is fully Supported.
Upgrade/Downgrade Firmware is not a problem.
Unique Fast Phone Booting Method (No need to press Power Button).
Compatible with regular FBUS Cables:

- 1616-2, 1280 and 1800 will work with regular 1616 FBUS cable
- 1202 and 1203 will work with regular FBUS cable or Easy Cable with RED
WIRE

Support for Infineon "CROSS-FLASHING" on same CPU Platform:

 1202 can be Cross-Flashed with 1203 and vice versa
 1616-2 can be Cross-Flashed with 1800 and vice versa
 1616-2 and 1800 can EVEN be flashed with 1280 firmware, but only for
testing .

DEAD PHONE Flashing is also FULLY supported (Software Problems Only)
Full Factory Reset for ALL DCT4 Infineon Chipsets


  /////////////////////
 //BB5 Turbo Engine //
/////////////////////
Multi SX4 Card Servers are now available (Original SX4 Cards)
Read and Write Camera Configuration is now Activated
Customized PM Read/Write is now Added (For reading specific sub fields)
Flash Mode Booting was adjusted to be more compatible with the 6700c
BB5 SL1 and SL2 Downgrade is now Activated
BB5 Self Test is now Activated

 New Products Added in Nokia.ini

 C1-00 RM-689
 C3-00 RM-614
 C5-00 RM-645
 C6-00 RM-612
 C6-01.1 RM-624
 E5-00 RM-632
 N8-00 RM-596
 X2-00 RM-618
 X3-01 RM-687
 X3-01 RM-639
 X6-00.1 RM-551
 X6-00m RM-552



  /////////////////
 //DCT4+ Engine //
/////////////////

Stand Alone ASIC-11 RSA Forgery Unlocking and Relocking is now supported

 Phone Model Support List:

 1110i, 1112b, 1200, 1202, 1208, 1208b, 1209, 1600b,
 1661, 1662, 1650, 1680 Classic, 1680 Classic-2b,
 2220 Slide, 2310, 2320 Classic, 2320 Classic-2b,
 2323 CLassic, 2330 Classic, 2600, 2600a, 2610, 2610b,
 2626, 2630, 2630b, 2660, 2660b, 2680 Slide, 2720 Fold,
 2760, 2760b, 2760h, 5000, 5030 XM, 6030b,6060V,6060V,
 7070 Prism, 7100 Supernova


  ////////////////////
 // iTablet Engine //
////////////////////

Bug fixed for "Flash File Not Found" error in N900 USB Flashing


  //////////////////////
 // General Settings //
//////////////////////

Changing Skin now is Enabled
Installation Path now set to Root directory (To avoid Windows 7
conflict).




*******************************
AdvanceBox Turbo Flasher v5.10
*******************************

Release Date: May 07, 2010



****************************************
AdvanceBox Turbo Flasher v2010.0.1.21
****************************************

v2010.0.1.21
 > Life Timer Tuning - >> First in the WORLD
      *can put anything you want
      *Read Life timer in hours and minutes

 >   Improved BB5 FBUS Flashing
 >   Added SX4 (Server Based)
 >   Backup RPL/PM and etc.. added its own IMEI
 >   Added Capture SCREEN, just right click mouse in window log
 >   Added window log function (Select all, clear, capture screen)



BETA V4.0
 > Used New Loader (Dated 12-7-2010)
 > Added Simlock RPL Unlock
 > Added Simlock RPL Relock
 > Added Old Method Unlocking SL1
 > Self Test - READING
 > Modify Loader Scanning
 > Production Data Edit - Reading
 > VPP Auto Voltage Enabled - If you want to use External VPP
 > Turbo Flashing Mode Enabled -> More Faster than Normal(One Boot
Flashing)
 > Fix Some Reported Bugs
 > Personal INI Settings added
 > Added Time Elapse time
 > Fixed Auto-backup RPL



BETA v3.0
 > More Stable BB5 FBUS Flashing (Support New PROTOCOL)
 > BB5 NCK Unlocking/Super Dongle Repair (SL1 and SL2)
  - RAP3Gv2
      Boots_E9EFF4BFAA5393217CA6B17755FC3E14
 -RAP3Gv3
     Boots_38F312750F686F9FC9B1B3778774A195
     Boots_9DDBFCFE6E73CED7D8C6268C8EB85723
     Boots_A5404AE83A594ECADEE532F0C236BFA6
     Boots_BAF3A9C3DBFA8454937DB77F2B8852B1
 -RAPIDO
     Boots_9A28E119033B91D14D22838C86D0D53C
     Boots_CAEEBB65D3C48E6DC73B49DC5063A2EE
     Boots_F2D76DFAFD66C7F195F278417DF05888
     Boots_F682624FFB08F6D955DBE7D9C0485084
     Boots_FCB5C510AF7F09F313D9BDE85A707CC0

> BB5 Manual PSW Send
> BB5 Super Dongle Repair
> BB5 Backup RPL (OLD and New Protocol)

> Read and Write PM
> Factory RESETTING

> Full scanning Product Folder

				
DOCUMENT INFO
Shared By:
Tags:
Stats:
views:7
posted:1/25/2013
language:
pages:36