Docstoc

14

Document Sample
14 Powered By Docstoc
					1713        The requirement of stability and durability regarding motorcycle stands                                                                                                     Formatted: Bullets and Numbering

     17.113.1 Effective date and Scope:
            13.1.1     As for the category symbols L1 and L3, the all vehicle types as of 2004/1/1, shall comply with this regulation.
            13.1.2     The applicants applying for low volume safety approval or vehicle-by-vehicle low volume safety approval could exempt from
                       regulation of “the requirement of stability and durability regarding motorcycle stands”.
     13.2     The requirement of stability and durability regarding motorcycle stands shall according to suitable types and range of principle as below:
           13.2.1        The same vehicle category symbol.
           13.2.2        The same brand and vehicle type series.
     17.213.3 Under any locking status,                  of the steering device, of motorcycle shall conform to the following requirements:                                             Formatted: Bullets and Numbering

            17.2.113.3.1       If the angle formed by the central vertical longitudinal planplanee and prop stand of motorcycle decreases 3 degree, the itprop
                         stand shall not retract to its retractedconduct to the restore of footing structure backs to its contract-back position.
            17.2.213.3.2       When tilt the prop stand and centerre stand of motorcycle according to in accordance of the following table datedata, the
                         motorcycle shall still keep stable thereunder.
                                              Stand type                                           Prop stand                                 Centerre stand
                                                                                  Vehicle of category Vehicle of category Vehicle of category Vehicle of category
                                   Category symbol of motorcycle
                                                                                       symbol L1            symbol L3               symbol L1                 symbol L3
                                                                                       Light -duty                                   Light -duty
                                                                                                         Heavy Motorcycle                                Heavy Motorcycle
                                           Motorcycle type                             Motorcycle                                   Motorcycle
                                                                                                          (Motorcycle)                                     (Motorcycle)
                                                                                       (Moped)                                      (Moped)
                          1. Transverse tilt (ttTT)                                         5%                  6%                       6%                       8%
                                                         ForwardDownstream
                                                                                            5%                  6%                       6%                       8%
                          2.    Longitudinal      tilt            lt LT
                          (LTlt)                          BackwardUpstream
                                                                                            6%                  8%                      12%                      14%
                                                                  lt LT


     17.313.4 All motorcycle stands shall be equipped with a retention system to support and retract their ed or travelling position the stands. If the                                 Formatted: Bullets and Numbering

The official directions are written in Chinese, this English edition is for your reference only.
                                                                                                           13 The requirement of stability and durability regarding motorcycle stands
              retention system consists of a single device consists of the retention system, then this retention system must be able to operate repeatedly
              for more thaen the period specified below and without maldysfunction. If two independent devices or more independent devices consist of
              the retention system consists of two or more separate devices, then this requirement can be bypassed.
           17.3.113.4.1        For two independent sdevices tands installed: 10,000 normal-use cycles of supporting and retractionretention for each stands.
           17.3.213.4.2        For a single standdevice installed: 15,000 normal-use cycles of supporting and retractionretention for each stands.




The official directions are written in Chinese, this English edition is for your reference only.
                                                                                                   13 The requirement of stability and durability regarding motorcycle stands

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:1/24/2013
language:English
pages:2