Giveaway - KMS Car Parts

Document Sample
Giveaway - KMS Car Parts Powered By Docstoc
					                                  Best Value Guaranteed


                         Shop online at the NEW kmstools.com



 Metal Fabrication
                                                      SALE
 SEPT. 1ST 31ST
OVER 1600 BLOWOUT
SPECIALS IN STORE
       see local store for details




   THE DEALS
GET EVEN HOTTER
 During The 3 Dayth le:
                     Sa
     Sept. 13th - 15
                  STUDENTS! All September, bring in a valid Student ID to receive
                 10% o of our lowest pricing! (some conditions apply, see in store for details)

12 Ton Portable                                                Magnum 8" Hand Shear
Hydraulic Pipe Bender                                          • Cuts 13mm (1/2") round steel bar
                                                                 by use of a hole through the upper
• Includes 6 dies                                                blade, and 6mm (1/8") flat steel bar
• Bends 1/2", 3/4", 1",                                        Reg. $129.99
  1 1/4", 1 1/2" and 2" pipe                                   MAG HS8
• Ram has 9 1/8" stroke
Reg. $178.99
TBR-TA1202
                                                               $9995
$14995                                                         Sept 13th To 15th
                                                                                   Save
 Save         Sept 13th To 15th
                                                                 $89     95        $40
  $39          $139        95

Campbell Hausfeld 5HP                                          Watson Flextime Leather Glove
80 Gallon Compressor                                           • Premium full-grain goatskin leather
                                                               • Leather hooded fingertips &
FACTORY REBUILT                                                  knuckle bar reinforcement
• 16 CFM @ 90 PSI
• 230V, 1PH motor
                               Save                            • Spandex back
                                                               • Velcro closure with
• Oil lubricated, single
  stage cast iron pump
                               $450                              snug-fitting elastic wrist
                                                               Reg. $15.99
• 1 Year Warranty
Compare at $1099.99
                                                               WG-005M
                                                               WG-005L          1/2
XX-CHTQ312600RB            Sept 13th To 15th
                                                               WG-005XL
                                                                               PRICE
$69995                     $649        95          Sorry!
                                               No Rainchecks
                                                               $795
SEE MORE COMPRESSOR DEALS ON PG30
                                                 Presented by:

                                            KMS Victoria & KMS Kelowna
                                                         October 11th-13th
                                         KMS Coquitlam               KMS Edmonton
                                        October 18 -20    th   th
                                                                     October 25th-27 th
   Featuring
   Paul Moore
   the Crazy
   Canadian
                                          FREE
   Woodworker                             • Admission • Parking
                                          • Smokies, Pop & Popcorn
   CHECK OUT THE BOOTHS:
                                          • Live Demos & Seminars

                                          General                     Dream
                                          Woodworking                 Workshop
                                          Machinery
                                                               Giveaway


                                            $7000
      MAY VARY BY LOCATION
                                            Value!             See Instore or Online for Details



                                          kmstools.com/woodshows

                                                 MONDAYS

         ENTER TO WIN
          1 OF 8 PRIZE PACKS
          WORTH $170
          EVERY MONDAY IN SEPTEMBER
        Like the KMS FaceBook Page
    1        facebook.com/kmstools


        Post a tip or piece of advice on car
    2   washing, detailing or polishing in the form
        of a facebook wall comment or video.

    Governed by KMS event rules as seen at www.kmstools.com


2 SEPTEMBER 2012
INDUSTRIAL SALES
 Gallant Metal Grinding Sander                              Jet Chain Hoist
 For use in a wide range of industries                      Meets ASME
 from steel and wood to textiles and                        B30.16 Standards
 plastics                                                   • 10' Lift height
 • 2Hp motor, available in 1PH or 3PH                       • Includes safety swivel
 • 3" x 90" Belt size                                         hooks top and bottom
 • 2000 RPM                                                 • Load tested to
 • 10" Diameter precision                                     150% of capacity
   contact wheel                                              with certificate
 • Sanding arm is adjustable to any
   position in a 360 degree circle.                         1 Ton
 • Can be mounted on a bench or                              Reg. $249.99
   portable stand, a mill drill                              JET 101112
   or lathe for precision
   machining applications.                                  $19995          Save
                                                                             up to
 Compare at $3999.99
 XX GAL MODEL390                                            2 Ton            $60
 $365000               Save                                  Reg. $339.99
                                                             JET 101132
                       $349
                                                            $27995
 Torchmate Growth Series 2x2 CNC System
 • Small footprint and minimal weight - Portable
   tabletop platform sets up in any shop.
 • Compatible with many CAD software
   suites - Or, choose from a selection
   at www.torchmate.com
 • Includes:
     • 2x2 CNC Table: 110V/1/60 15 amp
     • Tomahawk® 625 Plasma Cutter: 208/230/1/50/60
     • Water table
     • Excellent Customer Support System
     • Standard CAD Lite and Torchmate® Driver software
     • Machine Torch Holder
 LNC K31282

 $629999
 Thermal Arc 252i 3-N-1 Welder
 • MIG 250A, 40% Duty Cycle, includes MIG
   torch and is spoolgun ready for aluminum
 • DC TIG 250A, 40% Duty Cycle for
   mild and stainless steel                               Tweco 200A Spool Gun
 • STICK 230A, 40% Duty Cycle                             • Compatible with Thermal Arc 252i
   includes electrode holder                              • 15' Cable
 • Output range 5-300A                                    • Includes case and
 • 3 Year warranty                                          extra consumables
 Reg. $2599.99                                             Reg. $799.99
 THA W1004401                                              THA 1021391

 $249995                                                  $64995
           Save                                                                        Save
           $100                                                                        $150
                         Items Special Order in Some Locations
        Serving The Prairies To Vancouver Island
• On-site sales                                           ph: 1-800-567-8979
• Shop installations                                      fax: 1-800-567-3799
• Leasing & Financing                                     kmstools.com/industrialsales
  Available Through                                       Check online to find your
        easing
  KMS




                                                          sales representative
                                                                        SEPTEMBER 2012         3
METALWORKING
 Industrial 14" x 40" Metal Lathe                        9pc Metal Lathe
 • 2HP Motor                                             Cutter Set
 • 40" Between centers                                   • 5/8" Shaft           Sept 13th To 15th
   14" diameter swing                                      (16mm)
 • Safety chuck guard
 • Includes 6" 3 jaw and 8"
   4 jaw chucks
                                                          Reg. $167.99
                                                          MAG CS9                $12995
 • 12" Face plate
 • Thread cutting
                                                         $13995
   34 (4-56 TPI)
  Reg. $6766.99                                            Save
  KC 1440ML6           Save                                 $38
 $499995               $1767                             5/16" 7pc set also available.
                                                         $119.95 MAG CS7

 Industrial 12" x 36" Metal Lathe                        Morse Taper
 Includes Metal Stand                                    2 Live Centre
 • 1 1/2 HP, 220V 1Phase,                                • Medium duty live
   60Hz Motor                                              centre with MT3
 • 12" Swing over bed                                      taper shank
   (18" over gap)                                         Reg. $76.99
 • 36" Between centres                                    MAG LC2
 • 1 1/2" Spindle bore
  Reg. $3599.99                                          $4995                 Sept 13th To 15th
  KC 1236MLSS1236
                       Save                                                     $3995
 $3399       95
                       $200
                                                           Save           Morse Taper 3
                                                            $37           $59.95 MAG LC3

 10" x 22" Metal Lathe                                   12pc 3/4" Boring
 • 110/120V, 1HP Motor
                                                  Save   Bar Set
 • Variable speed control 150-2400 RPM
 • 22" Between centres 10" diameter swing                • 3" - 6 1/2" Length        Save
 • Includes 5" three jaw chuck, 6 1/2" four jaw   $150    Reg. $45.99
                                                          MAG BB34S                  21%
   chuck and
   8" face plate
 • Thread cutting                                        $3795
   8-72 TPI
  Reg. $2099.99
  KC 1022ML                                                Sept 13th To 15th

 $1949       95
                                                            $3595
 Stand also available. $209.95      KC SS1022            9pc sets also available.

 7" x 12" Metal Lathe                                    12" Quick Save
 • 110/120V, 1/2HP Motor
 • Variable speed control 0-2500 RPM              Save   Change    $40
 • 12" Between centres, 7" diameter swing
 • Includes 4" three jaw chuck
                                                   $80   Tool Post
 • Thread cutting 12-52 TPI                              • Fits most lathes
 • Forward/reverse                                         up to 12" swing
  Reg. $1049.99                                           Reg. $199.99
  KC 0712ML                                               MAG QCTPP12

 $96995                                                  $16995                  Sept 13th To 15th
                                                         10"-15" and
                                                         13-18" versions
                                                         also available
                                                                                 $15995
 Combination Lathe, Mill/Drill Machine                   10pc Morse Taper
 • 3/4HP 200 - 1800 RPM Lathe (9 speeds)
 • 1/2HP 430 - 1500RPM Mill (4 speeds)
                                                         2 Collet Chuck Set
                                                         • 3/32" - 5/8" Collets
 • 14" Swing over gap
 • 12" Between centres                            Save    Reg. $262.99
                                                          MAG CCS10PC2SAE            Sept 13th To 15th
 • Metric & SAE threads
                                                  $400
 • 7/8" Spindle bore
  Reg. $2299.99
  MAG LH009
                                                         $23995                       $21995
 $189995                                                 Save
                                                         $43
4 SEPTEMBER 2012
                                                         For use with MAG-LH009
Live Demos & Factory Reps METALWORKING
On Hand during 3 day Sale - Varies by Location
MACHINE IT
 1 1/4" Mill & Drill Machine                          3/4" Bench-Top Mill
 • 2HP 110/220V 1PH Motor
 • Includes: 3" face cutter, 1/2" chuck               & Drill Machine
   with key and 3 1/2" angle vise                     • Includes Drip Tray
 • Distance between spindle                           • 1HP, 1PH, 110V DC Motor
   nose and table 18 7/8"                             • Spindle depth and spindle
 • 16 1/2" Swing                                        RPM digital readouts
 • R8 Spindle taper                                   • Head tilts 90
 Reg. $2255.99                                          degrees right
                                                        and left
 KC PDM30
                                                      • 7 1/16" x          Save
 $162995                                                27 1/2" Table
                                                       Reg. $1599.99
                                                                           $150
                                                       KC 20VS
       Save
       $626                                           $144995
                     Stand available                                  Cutting Fluid Available
                      KC SS45                                         4L Pails $36.99 GRA XDCA1020L
                     $18995                                           20L Pails $139.99 GRA XDCA104L




 5" Angle Milling Vise                              6" Rotary Table
 • Swivel base, with degree ring                    • Mounts vertically                   Sept 13th To 15th
 • Jaws are 1 3/4" high, and open 4 inches            or horizontally
 • Dual clamping bolts
   on tilting mechanism
 Reg. $269.99
                                                    • Ideal for intricate and
                                                      accurate circular milling
                                                    Reg. $399.99
                                                                                           $31995
 MAG QHK125                                         MAG TRVH6

 $19995                                             $32995
           Save                                                                              Save
            $70                                     8" Rotary Table also available            $80
                                                    $379.95 MAG TRVH8
 15pc Collet Chuck Set                              20pc End Mill Set
 • R-8 Taper shank with 7/16" by 20 TPI             • High Speed Steel
 • Threaded hole for drawbolt                       • 3/16" to 3/4" End mills         Sept 13th To 15th
 • 1/8" - 1" Collets in 1/16" increments              in both 2 and 4 flute
 Reg. $409.99
 MAG CCS15PCR8S
                                                    • Includes case
                                                    Reg. $169.99                        $9995
                                                    MAG EMS20
 $33995                                             $10995
 Sept 13th To 15th
                                       Save             Save
  $319       95                         $90              $70
 Precision 6" 3                                     6" V-Block Pair               Sept 13th To 15th
                                Sept 13th To 15th
 Jaw Chuck MT3                                      • Sold in pairs
                                                    • Machine ground
 • Comes with inside and
   outside jaws
                                $19995              • Great for setup of
                                                      round materials
                                                                                   $3095
 • Has MT3 shank mounting                           Reg. $42.99
   attached to chuck                                MAG 518004
 Reg. $251.99
 MAG C3JP6MT3
                                                    $3295
 $219 Save95
                                                             Save
                     $52                                     28%                SEPTEMBER 2012                5
METALWORKING
    52" Metal Shear                                                       10" Hand Shear
    • Great for mild steel up to 16               Sept 13th To 15th       • Cuts 1/2" round
      gauge capacity as well as plastic,                                    steel bar and 1/8"      Save
      aluminium, brass and copper
    • Fine adjustments
                                                  $169995                   flat steel bar
                                                                          Reg. $139.99              25%
                                                                          MAG HS10
      on back-gauge
    • Positive pedal stop
      and transparent                                                     $10995
      finger guard
    Reg. $1999.99
    MAG FS1652
                       Save                                                Sept 13th To 15th

    $1799      95
                       $300                                                 $10495
                                                                           6", 8" & 12" also available.

    52" 3-in-1 Shear,                                                     2" Tubing Notcher
    Brake, Slip Roll Machine                    Save                      • Notches up to a 2"
    • 16 Gauge capacity                         $270                        tube and 1 1/2"
                                                                            Schedule 40 pipe
                                                                                                   Save
    • 9 Removable fingers from
      1" - 15" for box/pan work
                                                                          Reg. $87.99
                                                                          MAG PN12S
                                                                                                   25%
    • 3" Slip rolls with
      forming grooves
    • Includes 2 handles
                                                                          $6995
      and back gauge
    Reg. $2099.99
    MAG 3IN11320A                                                         Sept 13th To 15th
                                             Combines 3 Machines into
    $1829      95
                                               Shop Space and Money
                                                                     le
                                              1 Frame, Sav ing Valuab !     $6595
    9" X 18" Swivel Head                                                  1.5mm Rotary Shear
    Semi-Automatic Bandsaw                                 Save           • Up to 16 gauge
    • Variable Speed 2HP Motor                             $500             capacity in aluminum
                                                                          • Cuts straight lines and
      with Vertical Cutting                                                 curves in sheet metal
    • Blade Size:                                                         Reg. $49.99
      1 1/16" x 1/32" x 131 11/16"                                        MAG MMS1
    • Cut Cap. at 90º: Round 8 7/8"                                                                  Save
      Rectangular 8 7/8" x 17"
    • Cut Cap. at 45º: Round 8 7/8"
                                                                          $3695                      30%
      Rectangular 8 7/8" x 11 5/8"
    Reg. $5999.99                                                         Sept 13th To 15th
    MAG UE918SSA

    $549995                                                                 $3495
    Swivel Head, Geared Head Bandsaw
    • 7" X 10 1/2" rectangular
      capacity at 90 degrees
    • 1 HP motor, 60Hz, 1 phase
    • Cutting fluid tank and
      pump for prolonged blade life
    • 3 speeds: 125, 215 and 270 FPM
    • 0-45 degree miter scale,
      with 4 auto settings at
      0, 15, 30 and 45 degrees
    Reg. $1799.99
    MAG UE712SG
                            Save                                                               Sept 13th To 15th
    $159995                 $200
                                                                          4" x 6"
                                                                                               $29995
    7" x 12" Metal Bandsaw
    • 4 Speed, 9amp 110V, 1HP, 1PH motor            Save                  Horizontal Bandsaw
    • Uses 93" x 3/4" blades
    • Horizontal or vertical cutting
                                                    $130                  • 4 1/2" Round cutting
                                                                            capacity at 90 degrees
    • Adjustable vise for angle cutting                                   • Uses 64.5" x 1/2"
    • Adjustable hydraulic                                                  bandsaw blades
      downfeed control                                                    • Can be used in vertical position
    Reg. $1059.99                                                         • Includes small table for
    MAG UE712            Sept 13th To 15th                                  vertical position sawing
    $949      95
                         $92995
                                                                          Reg. $342.99
                                                                          MAG MCBS46
                                                                                                 Save
6      SEPTEMBER 2012                                                     $30995                 $43
CUT IT                                                                               METALWORKING
                                                              17" Upright Metal
Ingersoll Rand                                                Cutting Bandsaw Save
Air Shear                                                     • 2HP, 220V, 3PH Motor                   $310
• Cuts up to 18 gauge                                         • Precision-machined, ribbed
  sheet metal                                                   cast-iron table with 10° left
Reg. $219.99                                                    and 45° right tilting action
IR 7802S                                                      • Large aluminum rip fence with
                                                                easy to read magnifying scale
$17995                                                           Reg. $3359.99
                                                                 GEN 90320M1

       Save                                                   $309995                  Sept 13th To 15th

       $40                                                                             $304995
Bosch 4 1/2"                           7" x 12" Metal Bandsaw                               5 Year
                                                                                           Warran ty
Angle Grinder                          • 4 Speed, 120-220V, 1HP 1PH motor
                                       • Horizontal or vertical cutting
• 5 Times Epoxy                        • Automatic shut-off
  Coated Windings                      • 90° - 45° Mitre
• 6 amp Motor
• 11,000 RPM
                       Save            • Fluid cooling system
                                       • Electromagnetic switch
Reg. $79.99
BOB 1375A
                        $30             Reg. $1899.99
                                        GEN 90725

$4995                                  $159995                    Save
                                                                  $300

                                                                                                    5 Year
Makita 14"                             7" x 12" Metal Bandsaw                                      Warran ty
Cut-Off Saw Save                       Gearbox Eliminates the Need for Belt Changes
• 15 amp Motor          $40            • 3 Speed, 14 amp,120V,
                                         1HP, 1PH motor
• Quick release vise
• 45° Pivoting fence                   • Horizontal or vertical cutting
Reg. $209.99                           • Adjustable vise for angle cutting
MAK 2414NB                             • Adjustable hydraulic
                                         downfeed control
$17995                                 • Fluid cooling system
                                        Reg. $1699.99
                                                                 Sept 13th To 15th
                                        GEN 90700M1
                                                                                                   Save
 Sept 13th To 15th
                                       $154995                $149995                              $200
  $16995
5" x 6" Metal                                    5" x 6" Metal
                         Sept 13th To 15th
Bandsaw                                          Bandsaw
• 3 Speed, 1/2 HP, 1PH
• Automatic shut-off
                         $35995                  • Dual Swivel Head Mitre
                                                   Cutting Bandsaw
• Horizontal or vertical cutting                 • 3 Speed, 8 amp,
• 90° - 45° Mitre                                  110V, 1/2HP, 1PH motor
Reg. $389.99                                     • Head swivels
KC 129C                                            0° - 45° right
                                                   and 0° - 60° left
$36995                                            Reg. $734.99
                                                  KC 129DS

   Save                                          $67995            Sept 13th To 15th                 Save
    $30                                                            $669         95                   $65

Milwaukee Deep Cut                                      Chicago Pneumatic
Portable Band Saw                   Sept 13th To 15th   1/4" Die Grinder
• 5" x 5" Cutting Capacity
• 11 amp Motor
• 0-420 SFPM
                                     $31995             • Rugged, energy efficient 1/2 HP motor
                                                        • Heavy Duty bearings for long tool life
                                                        • Lock off throttle
Reg. $359.99                                            Reg. $159.99
MILW 623221                                             CP 860                                Save
$329       95                                Save       $129      95                           $30
                                             $40                                       SEPTEMBER 2012          7
METALWORKING
 100" Box/Pan Brake                                             Universal Bender
 • 13 Gauge mild steel capacity, (up to 1/8" Aluminum)          • Includes multiple radius dies
 • Several different sizes of fingers, from 3" to 20"             • Bends up to 120°
 • Clamping arms on both ends of the brake                      • Bends up to 3" wide by 1/2"
 • Includes 2 counterweights and stand                            thick, on cold steel
  Reg. $5999.99                                                  Reg. $230.99
  MAG W25X2540A                                                  MAG UB100

 $569995                                                        $19995
         Save                                                   Sept 13th To 15th     Save
         $300                                                    $18995                $41

 80" Box/Pan Brake                                              8" Vise Mount
 • 13 Fingers                                Save               Box/Pan Brake
 • 2.5mm (13 Gauge
   Capacities)
                                             $290               • 5 Fingers
 • Two large                                                    • Bends up to 18
   counterweights for                                             gauge mild steel Sept 13th To 15th
                                                                 Reg. $94.99
   ease of operation
 • 80 ¼ “working length
                                                                 MAG BVM8
                                                                                        $6995
  Reg. $3989.99
  MAG W25X2040A                                                 $75    95

 $369995                                                         Save
                                                                 $25
 48" Box/Pan Brake                                              4010AC       Save
 • Heavy Duty
 • 13 Gauge mild steel
                                            Sept 13th To 15th
                                                                Professional $200
   capacity, (1/8" Aluminum)
 • Several sizes of fingers,
                                          $229995               Bender
                                                                • Dies are
   from 3" to 20"                                                 interchangeable
 • Clamping arms on both ends                                     with JD2
 • Includes 2 counterweights                                    • Complete kit
   and stand
  Reg. $2699.99                                                   with 3 dies
  MAG W25X1220A        Save                                     Reg. $1099.99
                                                                MAG 4010AC

 $2349         95      $400                                     $95995
                                                                                    Sept 13th To 15th

 6 1/2' and 8' lengths also available                                               $89995
 24" Box/Pan Brake                                              Compact Floor
 • 20ga Capacity in mild steel
 • 1", 2", 3", 8", and 10" segments                             Mount Bender
  Reg. $429.99                                                  • Bends multiple radii, up to 200°
  MAG W10X610A                                                  • 5/8" Square and round bars
                                                                • 5/16" x 2" Flat bars
 $34395                                                          Reg. $119.99
                                                                 MAG YP38


         Save                                                   $8795
          $86                                                     Save
                                                                                      Sept 13th To 15th

                                                                  $40                   $7995
 48" Box/Pan Brake                                               36" Box/Pan
 Our Most Popular                     Sept 13th To 15th                                       Save
 Selling Brake!                                                  Metal Brake                  $135
 • 16 Ga mild steel capacity
   (20 gauge stainless steel)
                                      $72995                     • 16 Ga mild
                                                                   steel capacity
 • 16 Removable fingers                                           • Comes with counterweight
   from 2" - 4" wide                                               for easier operation
                                                                 • Has 1", 2", 3", 8", 10",
  Reg. $899.99
  MAG W15X1220A       Save                                         and 12" fingers

 $749     95          $170                                        Reg. $734.99
                                                                  MAG W15X915Z          Sept 13th To 15th

8 SEPTEMBER 2012                                                 $639       95
                                                                                        $59995
                                                 BEND IT                  METALWORKING
Model 32                                           Magnum 30" Bench
Hydraulic Bender             Sept 13th To 15th
                                                   Top Metal Brake
• Heavy duty version
  of the Model 3
• Allows bending of up to
                              $90995               • 17 Gauge steel capacity
                                                   • Great for HVAC and basic
                                                                                     Save
  2 1/2" tubing, with up                             sheet metal fabricating         $25
  to 1/4" wall thickness             Save          • Bend up to 90°
                                                    Reg. $99.99
• Hydraulic configuration
Reg. $1099.99                        $190           MAG BLD30
JDS 302001H
                                                   $7495
$929      95



Model 32 Manual Bender                             36" Metal Brake
• Heavy duty version of the Model 3                • 16 Ga Mild
• Allows bending of up to 2 " tubing, with           Steel Capacity
  up to 1/8" wall thickness, manually                Comes with
• Can be adapted for hydraulic operation             Stand
• Die sets, pumps, hoses and                       Reg. $379.99
  stand sold separately                            MAG W15X915
Reg. $549.99                          Save
JDS 302001
                                      $100         $29995                            Save
$44995                                                                                $80


Pipe & Tubing Bender                               15 Ton Portable
• Mechanical Mandrel style tubing,
  pipe and square tubing bender                    Hydraulic Pipe Bender                Sept 13th To 15th
• Bends up to 2" round tube, with                  • Includes 8 dies
  up to 1/8" wall thickness,
• 1 1/2" Square tube and
                                                   • Bends 1/2", 3/4", 1", 1 1/4",
                                                     1 1/2", 2", 2 1/2" & 3" pipe       $19995
  1 1/2" schedule 40 pipe                          • Ram has 9 3/8" stroke
• Accurately bends 180°                             Reg. $241.99
Reg. $399.99                                        TBR TA1502
JDS 1010012
                                                   $20995
$349      95
                 Save                                             Save
                 $50                                              $42
10 Ton Hydraulic Cylinder                          Malco 12" Folding Tool
• Fits JD Squared benders                          • 12F - 12" Folding Tool with
• 14" Stroke                                         3/8" & 1" depths
Reg. $472.99                                       • Great for HVAC applications
JDS 100168
                       Save                          such as folds for drive cleats
                                                     and joist panning              Sept 13th To 15th
$40995                  $63                         Reg. $20.99
                                                    MAL 12F
                                                                                       $1595
                                                   $16   95

                                                            Save
                                                            24%

Hydraulic                    Sept 13th To 15th     Malco 9" Adjustable
Adapter Kit                  $109        95        Folding Tool
• Adapter to mount the                             • Quickly adjust from 1/4" to 1 1/2" depths
  JDS-100168 hydraulic ram to a                    • Folds trim coil and aluminum siding
  JD Squared model 3 bender                        • Folds sheet metal up to 26 gauge
• Threaded cylinder mounting block,                 Reg. $25.99
  threaded ram extension, clevis and yoke pin       MAL 9A
• Hydraulic ram sold separately
Reg. $153.99
JDS 101012
                                                   $1995 Save
                 Save                                           23%
$11995           $44                                                          SEPTEMBER 2012            9
METALWORKING
                                                                                               Save
  50" Slip Roller                                        Planishing Hammer                     $55
  • 16 Gauge Sheet Metal Capacity
  • Adjustable back roller
                                          Save           • Great for shaping,
                                                           forming, stretching and
  • 3 Grooves for rolling 1/4"            $350             planishing sheet metal
    3/8" and 7/16" rod                                   • Throat size: 19 5/8"
  Reg. $1099.99                                          • 48" Overall height
  MAG W0115X1300                                         • 875-1350 BPM
                           Sept 13th To 15th             • 3 Lower dies
  $89995                                                   1", 2", 3" radius
                            $74995                       Reg. $314.99
                                                         MAG PH
                                                                         Sept 13th To 15th
                                                         $26995
                                                                         $25995
  36" Slip/Roll Machine                                  Manual Tubing Roller Save
  • 16 Gauge Sheet Metal Capacity            Save        • Includes dies for 1 1/4",
  • Adjustable back roller
                                             $130          1 1/2", 1 3/4" & 2"                    $250
  • 3 Grooves for rolling 1/4"                             round outside
    3/8" and 7/16" rod                                     diameter tubing
  Reg. $649.99                                           • Optional dies are
  MAG W0115X915               Sept 13th To 15th            available for 1" round
                                                           tube, 3/4" square tube
  $549      95
                               $51995                      and 1" square tube
                                                         Reg. $1199.99
                                                         MAG TR50
                                                                          Sept 13th To 15th
                                                         $99995
                                                                          $94995
  12" Slip/Roll Machine                                  Bead Roller
  Can be mounted anywhere on a bench                     6 Sets of dies, 3 sizes of beading & 3
  • 22 Gauge mild steel capacity                         sizes flanging 18 Gauge Capacity
  • Includes 3 grooves for wire rolling                  • Throat size: 15"
  • Swing out top roller                                 • Creates stiffening ridges and
  Reg. $189.99                                             finishing edges on sheet metal
  MAG W0108X305          Sept 13th To 15th
                                                         • Optional shearing dies
  $159     95
                          $14995                           available (MAG-4045)
                                                         Reg. $199.99
                                                         MAG BR

  Save                                                   $16995                                     Save
  $40                                                    Stand available. $79.95       MAG BRS
                                                                                                     $30
  Large Throat                                           Combination Shrinker &
  Shrinker/Stretcher                 Sept 13th To 15th   Stretcher With Stand
  • Heavy duty for up to
    16 gauge material
  • Approximately 8" deep throat
                                     $57995              No More Changing Jaws On
                                                         The Same Machine!
                                                         • Up to 18 gauge
  • Includes both sets of jaws,                            mild steel capacity
    and specially designed stand                         Reg. $369.99
    allows user to position the                          MAG SS18FD
    machine near the vehicle                                                       Save
  Reg. $699.99
  MAG SS16F                                              $33595                    $34
                     Save
  $59995             $120
  Combination Shrinker/                                  Compact Bench
  Stretcher          Save                                Mount Bender                   Sept 13th To 15th
  • 18 Gauge capacity
  • One set each, shrinker jaws
    and stretcher jaws
                                      $70
                                                         • Bends multiple radii,
                                                           up to 200°
                                                         • 5/8" Square and
                                                                                             $7995
  • Quick change sliding cartridges                        round bars
    via thumbscrews                                      • 5/16" x 2" Flat bars
  Reg. $249.99                                           Reg. $109.99
  MAG SSSET2                                             MAG YP9
                                                                                   Save
  $17995                                                 $8499                      $30
10 SEPTEMBER 2012
SHAPE IT                                                                  METALWORKING
English Wheel                                     Planishing Hammer
• Up to 16 gauge                                  • Complete With 9 Lower Anvils!
  capacity (mild steel)                           • 16 Gauge mild steel capacity
• 37 3/4" Throat                                  • Air operated, up to 4600
• Nine bottom anvils and                            blows per minute
  three 6" upper wheels          Save             • 4" x 4" Welded steel frame
 Reg. $1699.99                                    • Includes filter, oiler,
 BAI EW40                        $150               and foot pedal
                                                  • Hardened steel hammer head
$159995                                           • 24" Throat
                                                  Reg. $869.99
                                                  BAI PH24A
                                                                        Save
 Sept 13th To 15th
                                                  $79995                 $70
 $154995                      Special order in some locations

General Belt                                                Jewellery
& Disc Sander                                               Anvil                         Sept 13th To 15th
• 1 1/2 HP, 110V/220V Motor                                 • 1.1 Lb
• 6" x 48" Belt & 12" Disc
• Cast iron disc plate
                                                            • Stands 3 1/4" high
                                                            • 1 5/8" Long ring
                                                              sizing horn
                                                                                            $1495
• Belt lifts up to 90°
• Includes mitre gauge                                      • 1 1/2" Long flat horn
 Reg. $1259.99                                              • 1" x 1 3/16" Mid
 GEN 15035M1                                                  body face

$109995 Save
                                                              Reg. $19.99
                                                              HAW TJ8950      Save
        $16                0                                $15    95         25%
Magnum HVAC                                       Magnum
Rotary Machine                                    Ring Roller                    Save
• 22 Gauge Capacity
• 7" Throat
                                                  • Rolls rings from 1 1/2"
                                                    diameter and larger           $30
• Does wiring, crimping,                          • 1/4" Maximum
  ogee bead, single bead                            round stock
  and below edging                                • 1" x 3/16" Flat
• Includes five sets of dies and                     bar material     Sept 13th To 15th
  clamp-on, offset base                            Reg. $99.99
 Reg. $499.99
 MAG RM08
                           Save
                                                  MAG PR3
                                                                        $6995
$37995                                            $79    95
                           $120
Tubing Bender Kit                                 Martin 4pc Autobody                             Made
                                                                                                  in USA
• For bending brake                  Save         Repair Kit
  lines, fuel lines, air
  conditioning lines, etc
                                     $40          Lifetime Warranty                     Sept 13th To 15th
• Specifically for thin-wall                       • Includes two hammers,
  tubing, 18-22 gauge
• Includes dies for
                                                    dolly and spoon
                                                  • Professional quality                $14995
  3/8" - 7/8" round                               Reg. $188.99
  tubing, and 3/4" and                            MAR 644K
  1" square tubing
 Reg. $219.99
 MAG MY22
                                                  $15995
                                                              Save
$17995                                                         $39
Astro Pneumatic                                   Astro Pneumatic
Punch/Flange Tool                                 1/4" Air Riveter
• 3/16" Punch                                     • Up to 1/4" rivet capacity
• Forms an offset crimped                          • Heavy duty air over
  edge on sheet metal for                           hydraulic design
  no-bump lap welds                               Reg. $199.99
 Reg. $99.99                                      AP PR14P
 AP 605PT PISTOL                                                    Sept 13th To 15th      Save
 AP 605ST STRAIGHT                                $12995                                    $90
$7995            Save
                              Sept 13th To 15th
                                                  3/16" version
                                                                     $10995
                  $30          $6995              $99.95 AP PR36P             SEPTEMBER 2012 11
WELDING                                            ELDING TECHN
                                                                OLOG                       Y


                       3 PROCESSES
                                     E RATION OF W
                         THE NEW GEN
             INTRODUCING

        ON E MACHINE -
                1                                       2                                      3
      MIG WELDING                              TIG WELDING                         STICK WELDING
        (spool gun ready             (lift arc TIG only for mild or stainless         (includes stinger/
          for aluminum)                 steel. TIG Torch sold separately.)            electrode holder)



   Multimatic 200 3-IN-1 Welder                               3 Year
   Dual Voltage                                              Warranty

         1                    2                     3
     MIG: 50A,         TIG: 150A,     STICK: 150A,
   20% Duty Cycle     30% Duty Cycle 30% Duty Cycle

   • Auto Set Elite
   • Only 27lbs
    Reg. $2299.99
    MEM 907518
                            Save             Sept 13th To 15th
                            $400            $189995
   $199995
  Spoolmate                                 TIG Torch Kit                       Foot Control
  100 Spool           Sept 13th To 15th     For Multimatic 200
                                            • Includes everything
                                                                                For Multimatic 200
                                                                                • Allows control of power
  Gun
  • 12' Cable
                      $22995                  needed to TIG weld with
                                              the Multimatic 200 3-N-1
                                                                                  when TIG welding with
                                                                                  Multimatic 200
  • Fits Millermatic
    140, 180 & Passport
                                              machine. Includes case.
                                             Reg. $529.99
                                                                                Reg. $329.99
                                                                                MEM 195183               Save
    Plus welders                             MEM 300851
                                                                                $27995                    $80
  Reg. $279.99
  MEM 300371                                $44995
  $24995 Save                                 Save                               Sept 13th To 15th

                    $50                        $80                               $24995
   Thermal Arc 211i 3-IN-1 Welder                                  3 Year
   Dual Voltage                                                   Warranty

         1                    2                     3
    MIG: 200A,         TIG: 200A,     STICK: 200A,
   20% Duty Cycle     35% Duty Cycle 25% Duty Cycle
   • Can hold 44lb wire spool
   • Only 27lbs
    Reg. $1599.99                     Save
    THA W1004201
                                      $250
   $134995
  Tweco 160A                              TIG Torch Kit                         Foot Control
  Spool Gun                               • For Thermal Arc 211i                • For Thermal Arc 211i
  • Compatible with     Save
                         PIC?
                                          • Includes everything need to
                                            TIG weld with the Thermal
                                                                                • Allows control of power
                                                                                  when TIG welding with
    Thermal Arc 211i
  • 15' Cable           $50                 Arc 211i 3-N-1 machine.               Multimatic 200
  • Includes case and
                                          Reg. $269.99
                                          THA W4014603
                                                                                Reg. $259.99
                                                                                THA 600285
                                                                                                             PIC?
    extra consumables                                            Save                                Sept 13th To 15th
  Reg. $379.99                            $199     95
                                                                 PIC?
                                                                  $70           $199      95
  THA 10271390
                                                                                                     $17995
  $329     95                                                                   Save
                                                                                 $80
12 SEPTEMBER 2012
                                                                          WELDING
                        KMS Tools Carries over 20 Styles and 9 Classes of Helmets
Digital Elite Welding Helmet                                  Welding Helmet
• Four modes - Weld DIN #8-13,                                Head Gear
  CUT DIN #5-8 and Grind                                      • Compatible with
  DIN3.5, and X-Mode                                            older models
• 4 Independent        Black                                  • Ratchet adjustment
  arc sensors,         MEP 257213                               with four head
  1/20,000 speed Inferno                                        supports for
• 5 Amp TIG rating MEP 257217                                   maximum comfort
• Digitally adjustable                                          and strength
  sensitivity & delay Lucky's Speed Shop                       Reg. $29.99
• 2 3/8" x 3 7/8"
                       MEP 257214                              MEP 256174    Save
  Viewing area
• Auto on/off Sept 13th To                                     $22       95   23%
 Reg. $369.99             15th
                                  Save
$31995 $29995                      $70
Digital Performance
Welding Helmet                                                Welding Helmet
• Adjustable shade Black                                      Battery
  from DIN #8-13       MEP 256159                             • Lithium CR2450
• Adjustable                                                  • Fits all Miller
  sensitivity & delay 64' Custom                                electronic welding
• 1 7/8" x 3 7/8"      MEP 256160
                                                                helmets and many
  Viewing area        Blue Rage                                 other brands
• 3 Independent        MEP 256164                              Reg. $7.99
  arc sensors                                                  MEP 217043
• Auto on/off
• Replaceable lens Sept 13th To 15th
 Reg. $299.99                          Save
                                                              $595 Save
                                                                             25%
$24995              $22995              $70
Digital Pro-Hobby
Welding Helmet                                            CLEAR OUT
• Two modes - Weld
  DIN #8-13, Grind DIN3.5
                                                            PRICES
• 2 Independent arc sensors,                            On Previous Miller
  1/20,000 speed
• 20 Amp TIG rating
                          Black
                           MEP 256166
                                                         Helmet Models
• Digitally adjustable
  sensitivity & delay Blue Heat                                 UP TO
                                                         40% OFF
                           MEP 256170
• 1 7/8" x 3 7/8"
  Viewing area
• Auto on/off       Sept 13th To 15th
 Reg. $219.99                      Save                          Sorry!
$169     95         $159     95     $60                      No Rainchecks

"Firepower 250"
Welding & Cutting Outfit
• Cuts up to 1/2"
• Welds up to 5/64"
• Built in flashback arrestors
  and check valves
Reg. $249.99
VCT 03842551        Save                                Cutskill Regulators
$199    95          $50                                 • Dual Gauges
                                                         Reg. $109.99

Cutskill 250 Cutskill 350
• 2 Year warranty      • 2 Year warranty
                                                        $8995           Oxygen
Torch Handle           Torch Handle                       Save          • CGA 540 valve
                                                                          compatible
VCT-03872700           VCT 03872750                        $20          • 5-125 PSI

Cutting Head           Cutting Head     Save                            VCT 07819116

• Cut up to 5"         • Cut up to 6"    $30                            Acetylene
VCT 03872600           VCT 03872650                                     • CGA 510 valve
                                                                          compatible
Reg. $159.99           Reg. $169.99                                     • 2-15 PSI
                                                                        VCT 07819112
$129     95
           /each       $13995/each                              SEPTEMBER 2012 13
WELDING
   Power MIG 140C Welder                             Leather Sleeve
                                                                                      Sept 13th To 15th
   3 Year Warranty                                   Welding Jacket
   • Welds 24 gauge to 3/16" steel       Save
   • Input 20A @ 230V,
     output 30-140A                      $120
                                                     • Excellent for Hot Weather
                                                     • Durable split cowhide           $5995
                                                       leather sleeves
   • 20% Duty Cycle @ 90A                              for protection
   • Auto-temp shutdown                              • Flame retardant cotton
   • Simple heat and                                   back to keep you cooler
     speed selection                                  Reg. $89.99
    Reg. $819.99                                      LNC K2986M
    LNC K24711                                        LNC K2986L

   $69995                                             LNC K2986XL     Save
                                                     $69      95       $30
   Ranger 225                                        Heavy Duty Leather
                                        Save         Welding Jacket
   Welder/Generator                     $300
                                                                                         Sept 13th To 15th
   • Truck/Trailer mounted
   • 100% Duty cycle @ 210 amps
                                                     • Heavy duty split cowhide
                                                       leather chest and sleeves
                                                     • Cotton back to keep
                                                                                           $8995
   • Generator output 10,000W
     peak / 9000W continuous                           you cooler
   • Kohler 23HP gas engine                          • Flip up collar for
   • 12 Gallon fuel tank                               extra protection
   • 3 Year warranty                                  Reg. $129.99
    Reg. $3599.99                                     LNC K2989M
    LNC K28571                                        LNC K2989L
                                                      LNC K2989XL                            Save
   $3299       95
                                                     $9995                                   $40
   Millermatic 180
   Auto-Set MIG Welder                    Sept 13th To 15th
                                                                   Metalwork
   • Welds 24 gauge to 5/16" steel
   • Input 20A @ 230V, output 30-180A     $829        95           Gloves
                                                                                 Sept 13th To 15th
   • 30% Duty Cycle @ 135A                                         • M, L, XL
   • Spatter free starts                                           • Padded palm
   • Auto-temp shutdown
   • Simple heat and speed selection
                                                                     and back
                                                                   • Kevlar sewn
                                                                                        $14 95
   • 3 Year warranty                                                Reg. $24.99
    Reg. $929.99                                                    MEP 251066
    MEM 907312         Save                                         to 251068

   $849     95         $100                                        $1695 Save
                                                                         40%
   Diversion 180 TIG Welder                                        TIG Welding
   • Dual Voltage                                                                          Sept 13th To 15th
   • Welds .0030" up to 3/16"                                      Gloves
     mild steel or aluminum
   • Input 115V or 230V with included
                                                                   • M, L, XL
                                                                   • Goat and pig skin
                                                                                             $1995
     Miller Multi Voltage Plug                                     • Kevlar sewn
   • 35% Duty Cycle @ 125A on 110V                                 • Padded palm
   • 20% Duty Cycle @ 150A on 230V                                   and back
   • 3 Year warranty                                                Reg. $29.99
    Reg. $2099.99                                                   MEP 249178
    MEM 907460         Save                                         to 249180
                                                                                  Save
   $1899     95        $200                                        $2195 33%
   Spectrum 375 X-TREME                                            Light Duty Flame
   Plasma Cutter        Sept 13th To 15th                          Resistant Welding
   • New Faster Cutting XT30 Torch                                 Jacket
   • Longer lasting torch consumables
   • Dual voltage                         $134995                  • Dark Blue
                                                                   • Lightweight
   • Rated 3/8" mild steel at 18in/min
   • Severs up to 5/8" @ 5 in/min                                  • Durable cotton
   • Input: 115V/230V MVP (multi-                                  Reg. $39.99
                                                                   MEP 244750
     voltage plug), 1PH                                            to 244753
   • 3 Year warranty
    Reg. $1599.99
    MEM 907529
                       Save                                        $2495 Save
                       $250                                                      37%
   $144995
14 SEPTEMBER 2012
                                                                                            WELDING
"Fabulous Fabricator"                                 "Tigger" Back
Welding Gloves                                        Patch Gloves
• Premium grade                                       • Split deerskin
  steer hide                                          • 5" Leather cuff
• Welted seams for                                    • Kevlar stitched
  superior strength                                    Reg. $15.99
Reg. $10.99                                            WG 2753M
WG 2757M                                               WG 2753L
                                                       WG 2753XL
WG 2757L
WG 2757XL        Save                                                Save
$7  95           27%                                  $1195 25%
Welding Apron                                         Premium                         Sept 13th To 15th
• Rugged and durable                                  Welding Gloves
  split cowhide leather
• Kevlar thread                                       • Full grain deerskin palm        $1795
  stitching                                             and foam lined split cowhide back
• 23.5" x 40"                                         • Gunn cut, wing thumb
Reg. $32.99                                            Reg. $22.99
WG 3                                                   WG 2752M
                                                       WG 2752L
$2495 Save                                             WG 2752XL      Save
              24%                                     $19   95        20%

25' 240V Welders                            50' 240V       Welder
Extension Cord                              Welders        Plug Adapter
• Plugs Glow When Live
  For Work Safety
                                            Extension Cord • Plug your 3 prong 30
                                            • Plugs Glow When Live      amp welder plug into
• Heavy duty 8/3 wire                         For Work Safety           your dryer receptacle
  good to 50 amps                           • Heavy duty 8/3 wire     • 10/3 Gauge, 5' long
• Tough water and fire                         good to 50 amps             Reg. $34.99
  resistant cover                           Reg. $199.99                  CWC D13310005
Reg. $119.99                                CWC D13308050
CWC D13308025
                                            $14995                    $2795
$79     95

   Save                                           Save                     Save
   $40                                            $50                      20%        Wire extension
                                                                                      cords available


                                 Lifetime Warranty         Save up 26%
                                                                to
Locking "C"
Clamp with                                          Locking "C" Clamp
Swivel Pads                                         with Solid Pads

                          Reg.      Sale.
   4"    VIS 4SP          $18.99    $13.95                                     Reg.     Sale.
   6"    VIS 6SP          $19.99    $14.95                6"     VIS 6R        $18.99 $13.95
  11"    VIS 11SP         $26.99    $21.95               11"     VIS 11R       $24.99 $19.95
  18"    VIS 18SP         $49.99    $37.95               18"     VIS 18R       $49.99 $37.95

18" Locking Deep                    9" Panel Pliers               9" Panel Locking
"C" Clamp                           • Precision
                                      ground
                                                                  "C" Clamp
• With solid pads                   Reg. $38.99                   • With solid pads
Reg. $55.99                         VIS 9AC                       • Holds sheet, square,
VIS 18DR                                                            tubular and bar stock

$4995                               $2895                          Reg. $34.99
                                                                   VIS 9R

                                                                  $2895
                                                                                  SEPTEMBER 2012 15
WELDING
    Nomad Portable                                Magnetic                     Sept 13th To 15th
    Welding Table                                 V-Pad Kit
    • Table top 30" x 20"
      with three 1" slots
                                                  • Includes 2 small
                                                    and 2 large V-Pads
                                                                                 $1595
      to allow clamping                           • Great for setting
      through the table                             up material
    • Equipped with two                           • Saves time
      retractable guide rails                        Reg. $21.99
    Reg. $159.99                                     STH MVDF44
    STH TS3020
                     Save                                          Save
    $129     95                                   $1795            27%
                      $30
    Heavy Duty 4-in-1                                           6" x 4.75"           12" x 5.5"
    Sliding Clamps                                              Reg. $37.99
                                                                STH UF65C3
                                                                                      Reg. $64.99
                                                                                      STH UM85PC3
    Most Versatile Sliding Arm
    Clamp On The Market
    • Can be used as a standard
                                                                $2995                $4995
      sliding arm clamp, pipe
      clamp, spreader clamp                                     12" x 5.5"           20" x 5.5"
      and step over clamp     Save                              Reg. $99.99           Reg. $119.99
    • Includes V-pad            up to                           STH UM125C3           STH UM205C3
      and extender
      block accessories         25%                             $6995                $8995
   Jointmaster                                  Heavy Duty Corner Clamps
   Corner Joining Save
                   up to                        7"                                        Save
                                                • 4 3/4" Jaw length Sept 13th To 15th
   Pliers         26%                           • 1 3/8" Jaw height
                                                                                           up to

   • Fast, precise single                        Reg. $119.99
                                                 STH WAC34              $69      95        $50
     handed corner
     joining tool
   • Can be adjusted for                        $79     95
     varying thicknesses                        9.5"
                                                • 5 3/8" Jaw length
                            Reg.     Sale.      • 2 1/2" Jaw height
                                                 Reg. $159.99         Sept 13th To 15th
    3
     /4"     STH PL622      $26.99 $19.95        STH WAC45

    1 1/4"   STH PL634      $32.99 $24.95       $12995                 $11995
        Why Lease Gas Cylinders?
                                    Buy your brand new gas cylinders
                                      at KMS Tools and SAVE Money
                                     We'll fill your cylinder while you
                                   wait, and return it to you. Don't be
                                   stuck with someone else's cylinder!
                                     We are an                 Depot
                                     O2 / MIG Gas                               Sale
                                     20 Cu Ft     BOT O220
                                                  BOT AR20      $139.99         $99.95
                                     55 Cu Ft     BOT O255
                                                  BOT AR55      $229.99 $189.95
                                     80 Cu Ft     BOT O280
                                                  BOT AR80      $249.99         $209.95
                                     110 Cu Ft    BOT O2110
                                                  BOT AR110     $259.99         $229.95
                                     250 Cu Ft    BOT O2250
                                                  BOT AR250     $359.99 $319.95
             We stock CO2, N2, O2, Ar, Ar/CO2, & Tri Mix
16 SEPTEMBER 2012
magnum shop equipment
2200lb Car Rotisserie
No Manual Lifting Required
• Worm drive hand crank for easy, safe tilting
• Hydraulic cylinders to lift car when mounted
• Fully adjustable pivot point (to balance car body)
• Mount point adjustable to different widths
• Great for blasting, painting, welding and fabricating
Reg. $1364.99
TBR TAL15003
                                         Save
$119995              Sept 13th To 15th
                                         $265
                     $109995               A Must Have For The Serious Car Restorer

  2 Ton Heavy Duty Folding                            Engine Load Leveller
  Engine Hoist                                        • 1500lb Capacity
                                                      • Includes 4 lift chains
  • Includes Remote                                   • Easy move balance point
    Portable Pump                                         Reg. $45.99
  • Lift height: 82 1/2"                                  TBR TR2750
  • Folds up for easy
    compact storage
   Reg. $349.99
                                                      $3495
   TBR T32002E

  $29995 Save                                         Save          Sept 13th To 15th


                     $50                              34%               $2995
  1500lb Folding Engine Stand                         Hydraulic Vehicle
  • Front leg folds up for compact storage
  • Locking front casters                             Positioning Dolly
   Reg. $131.99                                           Reg. $129.99
   TBR T26801                                             TBR TRA9009

  $10995                                              $11495
 Sept 13th To 15th
                     Save
                                                     Sept 13th To 15th     Save
                                                      $10495               $25
  $9995               $32
  2 1/4 Ton Floor Jack                                6 Ton Jack Stands
  Heavy Duty                                          • Pair
  • Lift range: 5" - 16"   Save                           Reg. $59.99
                                                          TBR T46002
  • Steel frame
                            $14
   Reg. $89.99
   TBR T82251                                         $4995
  $7595                                              Sept 13th To 15th
                                                                         Save
                                                          $29    95       $30

  20 Ton Bottle Jack                                 Low Profile Creeper                 Save
  • Lift range: 9 1/2" - 17 13/16"
  • Screw extension: 2 3/8"
                                                     • 1 1/2" Clearance
                                                     • 40" Length
                                                                                         48%
  • Hydraulic lift: 5 15/16"                         • Low slung, sturdy metal frame
   Reg. $45.99                                       • Padded, easy to clean surface
   TBR T92003                                        • Six smooth-riding 2 1/2" wheels
                                                     • Adjustable headrest
  $2995 Save                                          Reg. $44.99
                                                      WIL W85005

                     34%                             $2295
                                                                                 SEPTEMBER 2012 17
SHOP EQUIPMENT
   Heavy Duty 3 Ton                   Magna 1 1/2 Ton Lever
   Floor Jack       Sept 13th To 15th Chain Hoist
   Low Profile                                              Meets ANSI Standards
   • Lift range: 3 1/2" - 18"
    Reg. $129.99
                                        $8995               • 10' Lift
                                                            • High alloy load chain
    TBR T830018                                             • All gears are machined
                                                              and case hardened
   $9995                                                    Reg. $274.99
                                                            MLP LH15010                     Save
      Save                                                  $224      95                    $50
      $40                                                   Also available in 1/4 & 3/4 Ton
   Mobile Lift Table                             Ingersoll Rand 1 Ton Come-A-Long
   • 300lb Capacity                              ASME Rated For Commercial Use
   • Table size: 18" x 30"                       • 20' of 3/16" Aircraft quality cable
   • Lift height: 8.5" - 28"                     • Heavy gauge steel handle and frame
   • Wheel brakes                                • Stainless steel springs for rust free years of use
     on rear wheels                               Reg. $119.99
    Reg. $174.99                                  IR P15D3H
    TBR TP01501

   $14995                                        $9995
         Save                                        Save            Sept 13th To 15th

         $25                                         $25               $9495
   40 Gallon Parts Washer                               6" Bench Grinder
   • Includes pump & flex hose                           Variable Speed
   • Fire safety fusible link on lid                    • 1/3HP, 110V
   • Uses 10 gallons of solvent                         • 2000-3400 RPM
   • Removable work shelf                               • Includes light, guards, tool
    Reg. $209.99                                          rests and grinding stones
    MAG PW40                                                Reg. $114.99

   $189     95                                              MAG TDSG150VLA


                 Sept 13th To 15th
                                                        $8995
   Save                                                                 Sept 13th To 15th

    $30           $179       95                              Save          $8495
   Also available in 5 & 20 Gallon
                                                              $30       Also available in 8"

   20 Ton Shop Press                                                    3 Ton                 Sept 13th To 15th
   Includes Gauge                                                 48" Farm Jack
   and Remote Pump
   • Working range: up to 34"                                     Meets ANSI
                                                                  Standards
                                                                                                $7995
   • 7" Stroke
   • 21 1/2" Bed width
   • 2 Press plates
                             Save                                 • Lift, hoist, pull, or
                                                                    push up to 4660 lbs
    Reg. $419.99
    TBR T52004
                              $70                                   rated capacity
                                                                  • Includes top winch
                                                                    connector
   $36995           Sept 13th To 15th
                                                                  Reg. $109.99
                                                                  HL 484                             Save
                    $34995                                        $8995                               $30

   Tradesman's                                                      1000lb Trailer Jack
   5" Swivel Base                       Sept 13th To 15th           • 6" Swivel
                                                                      wheel
   Bench Vise                            $5995                      • Bolt on or
                                                                      weld to
                                                                                               Sept 13th To 15th
   • Replaceable jaws
   • Swivel base with position lock
    Reg. $74.99
                                                                      your trailer
                                                                    • 10" Lift
                                                                                                 $2995
    TTN 22013                                                       Reg. $43.99

                    Save                                            BR TJ0601K
                                                                                                     Save
   $6495            20%                                             $3195                            31%
18 SEPTEMBER 2012
                                                                                SHOP EQUIPMENT
 Magnum 2 Tray                                                              Aluminium Combo
 Service Cart                                                               Compound
 220lb Capacity                                                             • One step aluminium
 • 16''W x 30"L x 33"H                                                        buffing compound
 • 4" Swivel casters with
   2 locking casters
                                                                             Reg. $16.99
                                                                             BUF C3600                Save
  Reg. $129.99
  MAG SC5244                                                                $10    95                 35%
 $99     95         Sept 13th To 15th
                                         Save
                      $89     95         $40 Shop Vac 8 Gallon Stainless
 6" Bench Polisher                                    Vacuum
                                                      • 12 amp Motor
 • Includes Wheels
 • 1/3HP, 110V, 1PH           Save                    • 210 CFM
                                                      • Heavy duty wheels
 • 3450 RPM
 • 1/2" Shaft                  $33                    • Includes 8' x 2.5" hose,
                                                        versatile selection
  Reg. $142.99
  MAST PT20006W                                         of accessories and
                                                        accessory storage basket
 $11995                                                Reg. $251.99
                                                       SV 96211

Sept 13th To 15th                                     $19995 Save
$10995                                                                $52
                                                             Heavy Duty
                                                             Ratcheting Strap
 Platform Service Cart                                       3000lb Capacity
                                                                                               Sept 13th To 15th
 • 300lb Capacity
 • 36" x 24" Deck surface
 • 4" Solid rubber tires
                                                             • 1" x 15'
                                                             • Double J Hooks
                                                              Reg. $16.99
                                                                                                  $1395
 • Easy fold down handle                                      ERK 51316BULK
  Reg. $89.99
  MAG PH300                                                  $1495
 $7495
                       Save             Sept 13th To 15th

                        $20              $6995              Hand Truck
                                                            • 440lb Capacity
                                                            • 10" Pneumatic tires
  5" Swivel Caster                                           Reg. $69.99
  • Easy rolling                                             MAG HT1805
   Reg. $12.99
   MAG SC510                                                $3495
  $9   95
                                                                        Sept 13th To 15th
Save          Sept 13th To 15th                              1/2
                                                            PRICE           $2995
31%                 $8   95

Flat Free 10" Wheel                                         600lb Furniture Dolly
• 5/8" Shaft size                                           • 3" Swivel casters
• Foam filled 10" wheel, great for hand                      • Carpeted ends
  trucks, wheelbarrows, carts, etc                          • 18"W x 30"L x 5 1/2"H         Sept 13th To 15th
 Reg. $24.99                                                 Reg. $29.99
 MAG FF10X3504                                               MAG TC0500
                                                                                              $1795
$19    95
                                                            $19   95

Save          Sept 13th To 15th

36%                 $1595                                     Save
                                                              40%
                                                                                      SEPTEMBER 2012 19
                           bynford PRO
    LOCKING BOXES WITH BALL BEARING SLIDES & DRAWER LINERS

    ALSO AVA ILA BLE IN BLACK                        26" 9 Drawer Top Chest
                                                     • 26"W x 12.1"D x 17.1"H
                                                     • Extra strength rolled
 41" 8 Drawer Top Chest                                drawer edges
                                                     • Heavy duty side handles
                                                                                  Sept 13th To 15th
 • 41.4"W x 17.5"D x 21.7"H
 • Heavy duty side handles
 • Extra strength
                                                     Reg. $199.99
                                                     TBR TBT4009X                  $14995
   rolled drawer
   edges
                                                     $15995
 Reg. $451.99
 TBR TBT4408X                                              Save
 $399     95                                               $50

   Save                                              27" 7 Drawer Roller Cabinet
                                                     • 27"W x 18"D x 39"H
   $52                                               • Extra strength
                                                       rolled drawer edges
                                                     Reg. $398.99
                                                     TBR TBR4007X

 42" 11 Drawer Roller Cabinet
 • 42"W x 18"D x 39.6"H
                                                     $34995
 • Includes heavy duty casters
   with grease nipples
                                                                 Save
 • Heavy duty side handles                                       $49
 • Extra strength rolled drawer edges
 Reg. $734.99
 TBR TBR4411X
                                                     26" 3 Drawer
 $64995                                              Intermediate Tool Box             Sept 13th To 15th
                                                     • 26"W x 12.5"D x 10.5"H

    Save
                                                     • Extra strength rolled
                                                       drawer edges                      $7995
                                                     Reg. $109.99
     $85                                             TBR TBI4003X

                                                     $8995 Save
                                                                  $30

  27" 7 Drawer                                              20" 3 Drawer
  Roller Cabinet                                            Portable Tool Box
  • 430 Grade Stainless Steel                               • Ball Bearing Slides
  • 27"W x 18"D x 39"H                                      • 20"W x 8.5"D x 11.8"H
  • Extra strength rolled                                   • Includes built-in lock
    drawer edges                                            • Features pivoting
  • Includes
    drawer liners      Save                                   top tray for
                                                              small parts
   Reg. $499.99
   TBR TBR4307S430     $50                                   Reg. $60.99
                                                             TBR TBD133X

  $44995 Special order in some locations $4995
  Socket Box                                         17" Portable Toolbox
  • 10" x 5" x 1.5"              Sept 13th To 15th   • 16.9"W x 7.9"D x 6.7"H           Sept 13th To 15th
  • Great for sockets or                              Reg. $17.99
    other tool storage
  • Sturdy all metal                $795              TBR TBH102A
                                                                                          $1095
    construction
   Reg. $11.99
                                                     $12    95
   TBR TBH112

  $895 Save                                             Save
             33%                                        39%
20 SEPTEMBER 2012
                                                                                        TOOL BOXES

                                                                           33" 5 Drawer
                                                                           Service Cart
                                                                           • Ball Bearing Slides
                                                                           • 33 4/5"W x 20
                                                                                                      Save
                                                                             4/5"D x 41 2/5"H
                                                                           • Locking drawers
                                                                                                       $48
                                                                           • Opens with gas shocks
                                                                           • Includes drawer liners
                                                                              Reg. $377.99
                                                                              TBR TC327

                                                                           $33995              Sept 13th To 15th


48" Jobsite Box                                                                                 $32995
Single Padlock Internal
Bar Locking System                      27" 2 Drawer Slide
• 48"W x 24"D x 28"H
• Round handles on                      Top Service Cart
  both lid and body                     • Ball Bearing Slides
• Heavy duty lid                        • 27.8"W x 14.6"D x 32.7"H
 Reg. $314.99
 TBR TBG48D
                     Save               • Slide top opens for easy
                                          access tool storage
                      $15               • Fully locking
$29995                                   Reg. $157.99
                                         TBR TC310        Sept 13th To 15th                       Save
 ALSO AVAILABLE IN
 36" & 60" MODELS.                      $129      95
                                                           $119       95                           $38

23" Plastic Hand Box                                   Stanley 4pc
                                                                                             Sept 13th To 15th
• Dimensions: 23.5" W x 10.8" D x 10.3" H
• Includes handy removable tray                        Parts Bin Set
 Reg. $34.99
 WAT PP2310BK
                                                       • Includes wall mounting rack
                                                       • Unique lock-in stacking                $995
                                                        Reg. $14.95
$2795                                                   ST 057304R

                                                       $1195
Sept 13th To 15th
                                       Save                   Save
  $2495                                28%                     $33

60 Drawer                                              Deluxe Pro 17
Storage Cabinet               Sept 13th To 15th        Compartment
• 14 7/8"W x 6 3/8"D
  x 18 1/2"H
• Multi-drawer design for
                                $2995                  Organizer
                                                       • Dividers keep contents
                                                                                                 Sept 13th To 15th

  storing a wide variety
  of parts & supplies
                                                         organized - grid design lid keeps
                                                         contents from shifting
                                                                                                    $1395
• Clear see-through                                    • Can be divided into
  drawers for quick,                                     17 compartments
  easy identification                                    Reg. $22.99
                                                        SO DO17
  of contents
                                                                         Save
 Reg. $40.99
 SO DS60                                               $1595             39%
                    Save
$3195               26%
                                                       Deluxe Deep
                                                       Cup 10 Compartment
Ernst Wrench Organizer                                 Organizer                                  Sept 13th To 15th
• Holds 16 wrenches
• Red or Black
 Reg. $7.99
                                                       • Ten removable cups in 2 sizes
                                                       • Lid design keeps contents
                                                         from shifting
                                                                                                    $1895
 ERN 5060
 ERN 5061                                               Reg. $29.99
                                                        SO DCOG10
$4   95
            Save           Made
                                                       $2095 Save
            38%            in USA                                     36%
                                                                                     SEPTEMBER 2012 21
HAND TOOLS
   Channellock 7"                     Made
                                      in USA               Stanley FatMax
   Heavy Duty Diagonal                                     9 1/2" Linesman Pliers
   Cutting Pliers                                          • Ergonomic handles provide a
                                                             comfortable and controlled grip
   Lifetime Warranty                                       • Induction hardened jaws for
   • Featuring high carbon C1080                             increased durability
     steel for superior performance                        • Drop forged construction
   • With knife & anvil style cutter                         for added strength
                                                           Reg. $26.99
     for a clean cut every time
    Reg. $21.99                                            ST 89865                    Save
    CHA 337                          Save                                              29%
   $1695                             22%                   $1895
   Vise-Grip 10" Curved                                    Titan Ratcheting Wire
   Jaw Locking Pliers                                      Terminal Crimper
   Lifetime Warranty                                       • Crimper features a ratcheting
   • Curved jaw puts pressure on                             mechanism design with
     any style nut or bolt head                              adjustable crimping compression
   • Includes convenient                                   • Has a steel jaw color
     wire cutter                                             coded for wire
    Reg. $21.99                                            Reg. $24.99
    VIS 10WR                                               TTN 11477

   $1795                                                   $1995
                  Save         Sept 13th To 15th

                  27%                $1595                  Save        Sept 13th To 15th

                  Made
                  in USA
                                                            28%           $1795
   Signet 14pc Punch                                       Proto 7pc Pin Punch Set
   & Chisel Set                       Sept 13th To 15th    • Specially heat treated for
                                                             strength and ductility
   • Includes 2 centre
     punches, 2 line-up                  $24     95        • Modified parabolic striking end to help
                                                             reduce mushrooming and chipping
     punches, 4 cold chisels
     & 6 pin punches
                                                           • 1/4" - 7/32"
                                                           Reg. $59.99                            Save
    Reg. $34.99
    SIG 0886014
                                                           PRT J48007
                                                                            Sept 13th To 15th     25%
   $2795                                       Save $4995                    $4495
                                               28%
   Norseman Spot                                           Magnum Mini Tubing Cutter
   Weld Cutter                        Sept 13th To 15th    Great for working in extremely tight
                                                           spaces
   • 8mm (5/16")
   • Cobalt alloy
    Reg. $14.99
                     Save
                      up to
                                         $9    95
                                                           • Cuts 1/8" - 5/8" OD tubing
                                                           Reg. $4.99
                                                           MAG 1066
    NOR 37470
                     33%
   $1195                                                   $295 Sa
                                                Made
                                                                   ve
                                                in USA
                                                                      40%
   Also available in 6.5mm (1/4")
   NOR 37520                                   $795
                           Cleco Temporary Fastening System
   Pliers                   Clamps                                              Fasteners
   Reg. $17.99              • Great for temporarily                             3/32", 1/8", 5/32", 3/16"
   BBB CP                     fastening sheet metal for                          Reg. $1.09
                                                                                 BBB   C332
                              drilling or riveting operations
   $14  95                                                                       BBB
                                                                                 BBB
                                                                                 BBB
                                                                                       C18
                                                                                       C532
                                                                                       C316
                                                    Reg.    Sale.
                            1/
                              2  "    BBB CC12      $4.45 $3.49                 75¢
                            1"        BBB CC1       $5.49 $4.49
22 SEPTEMBER 2012
                                                                                   HAND TOOLS
                                 Sept 13th To 15th
Digital Multimeter                                   Klein Clamp Meter
• AC/DC
• Wide Voltage range
                                 $17995              • AC/DC Voltage
                                                       Measurement to 600V
  to 600 volts AC/DC                                 • Large clamp opening
• Auto Range to millivolts                           • Worklight lights
• True-RMS for accurate                                clamp area
  measurement in all
  applications
                                                     • Side mounted dial
                                                       for ease of use     Save
• Frequency measurements
  from 10Hz to 50kHz
                                                     • Lighted display
                                                     Reg. $89.99
                                                                            $20
• Contact temperature                                KLE CL100
  measurement from
  -40° to 752°F
Reg. $209.99
                                                     $7495             Sept 13th To 15th

MILW 221720       Save                                                     $6995
$18995             $30
                                                     UEI Digital Pocket
Voltage Detector                     Save            Thermometer
With Light                           24%             • 3 Year Warranty
                                                     • Ideal for checking the performance
• Voltage range 50-1000 AC                             of your air conditioning system
• Designed for industrial applications               • Reads -58 to 571°F
• Doubles as mini-flashlight                            and -50 to 300°C
• Uses AAA batteries                                 Reg. $43.99
Reg. $32.99                                                                    Sept 13th To 15th
                                                     UEI PDT550
MILW 220220                                                         Save
$2495                                                $2995          43%          $2495
3-in-1 Laser Pen                            32pc Combination
• Great for mechanics,
  technicians, electricians,                Wrench Set
  musicians, theatre, home,                 • SAE & Metric Combination
  shop, auto and much more!                 • Sae sizes: 1/4 - 3/4" , Stubby
Reg. $5.49                                    SAE sizes: 5/16 - 5/8". Metric
WIL W9168                                     sizes: 6 -18 mm, Stubby
                                              Metric sizes: 10 - 15 mm
$395                                        • Mirror polished chrome
                                              vanadium steel
                                            • Improved box end design
                         Save                 grips sides of fasteners
                                              for more torque
                         28%                                 1/2
                                             Reg. $49.99                    Sept 13th To 15th
                                             WIL W1099

                                            $2995           PRICE             $2495
         l                                           8" Adjustable Wrench
    Too nce
        a
                             • Used Tools &           Reg. $8.99

   e a r t re
                               Equipment


C l C en
                             • Display Models
                             • Missing Parts
                                                     $449
                                                       1/2
                             • Damaged Goods
        Trade In             • Discontinued

      Consignment
                             • Surplus
                             • Out of Box             PRICE                                        L200
        Buy Out              • Old Packaging
                                                     Misc Flashlights                       1/2
3/4" Drive Oil Filter Wrench
                                                     Reg. $7.99 - $19.99
                                                                                           PRICE
• Fits most oil filters for 4 &
                                                     $395 - $995
  6 cylinder (74-76mm)
 Reg. $5.99
                                  1/2                                                           L200
$2                               PRICE
     95
                                                     9pc Folding Hex Key Set
                                                     • SAE or Metric
                                                      Reg. $11.99
                                                                                            1/2
                                                     $595                                  PRICE
                                          L200
                                                                                                   L200
                                                                               SEPTEMBER 2012 23
HAND TOOLS
   Wera 6pc SAE Nut Driver Set PicQuic Multi Driver
   Lifetime Warranty                                 Includes FREE 7 Bit                   Save
   • Nut Spinner:                                    Compact Multi-Driver                  33%
     3/16 - 1/2                                      • Solid handles for maximum
   • Alloy tool steel                                  comfort and torque
   • Hollow round shaft                              • Anodized aluminum
    Reg. $57.99                                        alloy shank
    WER 029508
                       Save                           Reg. $29.99

   $44       95
                       22%
                                                      PIC 88080

                                                     $1995
   Also available in metric          WER 029510

   Titan 3pc Finger Driver Set                       Magnum 7pc                  Sept 13th To 15th
   • Includes 1/4" slotted screwdriver
     bit, #2 Phillips screwdriver bit,               Screwdriver Set
     1/4" socket adapter bit
    Compare at $9.99
                                                     • Insulated to 1000V
                                                     • Ergonomic, compact
                                                                                   $2495
    XX TTN 32958                                       handle with VDE
                                                       interchangeable                     Save
   $695                                                blades
                                                      Reg. $39.99                          37%
                                                      MAG 1270


   Sept 13th To 15th                                 $2995
                       Save
      $595             40%
   12pc Torx Bit Socket Set                          Performance Tool 30pc SAE/
   Lifetime Warranty
   • T10 - T60
                                                     Metric Hex Key Set
   • 1/4", 3/8" & 1/2" drives   Sept 13th To 15th    Lifetime Warranty                 Sept 13th To 15th
    Reg. $21.99                                      • SAE from 0.028" - 3/8"
    WIL W38802                       $15   95        • Metric 0.7 - 10mm
                                                      Reg. $15.99                          $1095
   $17    95                                          WIL W80288

                                                     $1295
   Save                                                       Save
   27%                                                        31%
   Fuel Injection Pressure Tester                    Timing Light,
   • Includes Ford, GM and Chrysler
     test adapters and a "Tee"                       Inductive Pick-up
     adapter for import vehicles                     • Scale adjusts from 0 - 60 Degrees
   • Helps identify and diagnose Sept 13th To 15th   • Includes a rotating barrel, detachable
     low fuel pressure issues                          leads, metal inductive pickup
    Reg. $64.99
    EQU 3640                         $4495           • Checks operations of mechanical or
                                                       vacuum advance timing and base timing
                                                      Reg. $99.99
   $4995                                              EQU 3555

                                                     $6995
      Save                                                   Save
       $20                                                    $30
   JB Weld Metal Weld                                Titan 9pc Metric Hex Key Set
   • Steel reinforced epoxy putty                    • Includes all popular Metric sizes
   • Cures completely submerged                      • High quality alloy steel
     in gasoline or water                              with black oxide finish
                                                                            1/2
   • Can be drilled, filed, tapped,                   • 1.5, 2, 2.5, 3, 4,
     machined and painted                              5, 6, 8 & 10mm
   • Repair any metal                                Compare at $8.99
                                                                           PRICE
                        1/2
    Reg. $10.99                                      XX TTN 12729
    JB STEELSTIK                                                     HOT
   $5   49             PRICE                         $395            DE A L
                                                         Sorry!
24 SEPTEMBER 2012                                    No Rainchecks
                                                                       HAND TOOLS

 PRICE
                             Everything Below
CRUSHER                    is 50% OFF or more
 Jet 2pc Offset Aviation Snip Set                          Heavy Duty
 Lifetime Warranty
 • Offset blades keep fingers
                                                           Wire Rope Cutter
                                                           • Wire Rope Cap: 1/4"
   away from work piece
     Compare at $52.95                                     • Piano Wire Cap: 3/32"
     XX JET 735325                                         • Steel Wire Cap: 5/32"
                                                            Reg. $37.99
 $2595                                                      APC 22WRC75

                                                           $1895


 3
  / " Drive Stubby Ratchet
     8                                   8" Linesman Pliers
 • Fine tooth ratcheting action          • Cushion Grip
   for a smaller ratcheting arc and      • Curved back handles for
   better access in tight spots            added leverage and less slip
 • Length: 4.25"                         • Exclusive rounded inside
 Compare at $39.99                         edges for comfort
 XX GW 81209                              Compare at $24.99
                                          XX GW 82025
 $12     95
                                         $1195
 4pc Professional Pliers Set             75pc Basic Home Tool Kit
 • Non-slip molded grips                 Just Getting Started?
 • Induction hardened                    • Contains hammer, tape measure,
   cutting edges                           screwdrivers, pliers, snap blade
 • Includes 6" slip                        knife, torpedo level, assorted
   joint, 6" diagonal,                     fasteners, and case
   6" long nose, and                      Reg. $34.99
   7" linesman pliers                     WIL W1543
 Reg. $29.99
 WIL W30765
                                         $1695
 $14     95



 Magnum 4" Digital Caliper                              4pc Rare Earth
 • Displays in fractional,
   thousandths and metric                               Magnet Set
 • Zero setting in any position                         Button style
 • Hardened stainless steel                             • 1/2" Diameter
 • Auto shut-off                                         • 8lb Maximum pick-up
 • Depth gauge                                           Reg. $8.99
 Reg. $37.99                                             HAW M88684
 MAG 1058

 $18     95                                             $449
 Irwin 3pc Locking Pliers Set                           Performance Tool
 • "Original" set includes 10CR, 7CR
   and 5CR with curved jaws                             14oz Grease Gun
 Compare at $59.99                                      • Heavy duty
 XX VIS 4935580                                         • Short stroke lever
                                                        • Positive lock
 $2995                                                  Reg. $14.99
                                                        WIL W54203

                                                        $749     Grease from $5.99
                                       Sorry! No Rainchecks SEPTEMBER 2012 25
AUTOBODY

                                                    MONDAYS
             ENTER TO WIN
             1 OF 8 PRIZE PACKS
             WORTH $170
             EVERY MONDAY IN SEPTEMBER
          Like the KMS FaceBook Page
      1       facebook.com/kmstools

          Post a tip or piece of advice on car
      2   washing, detailing or polishing in the form
          of a facebook wall comment or video.

     Governed by KMS event rules as seen at www.kmstools.com




                    ALL
         25% OOFF L O N G
            M
         A L LN T H


                                                                      Water
    Wash Mitt                      Wash Pad                           Removal          Sept 13th To 15th

    • Minimize
      scratching
                                   • Minimize
                                     scratching
                                                                      Blade
                                                                      • No more
                                                                                           $1995
    Reg. $8.99                      Reg. $9.99
    SMA 25331                                                           water spots
                                    SMA 25333                         Reg. $29.95
                                                                                           Save
    $6  95
                                   $6    95                           SMA 25923
                                                                                           33%
                                                                      $22    95
     Save                            Save
     22%                             30%

   18" Panelbeater Bag                                    Plastic Teardrop Mallet
   • Supports sheet metal, yet 'gives'                    • Metal shaping hammers
     under mallet blows to allow the                        that will not mar metal
     metal to stretch                                                                      Save
     into shape                                                                             up to
   • Full 18" square
   • Fill with dry sand                                                                     31%
     or lead shot
    Reg. $61.99                                                                     Reg.     Sale.
    EAST 28030
                                                           2"       EAST 28114      $43.99 $29.95
   $4995 Save                   Sept 13th To 15th          2 1/2"   EAST 28115      $45.99 $32.95
                                                                                    $49.99 $36.95
                                                           2 3/4"   EAST 28119
                   30%            $4295
                                                       Butt Weld Clamps Save
                                                       • Set of 4
    Panel Flanging Pliers                              • Align panels edge to edge          39%
    Reg. $39.99                                          and surface to surface with
     EAST 31092                          Save            the appropriate 0.040" gap
                                         up to
    $3295                                17%
                                                       • Produce clean welds with
                                                         minimal grinding
                                                        Reg. $40.99                   Sept 13th To 15th
   Extra Wide                                           EAST 19016
   also available
   $36.95                                              $2995                               $2495
    EAST 31090

26 SEPTEMBER 2012
                                                                                     ABRASIVES
                         KMS Tools is your number one
                         source for Klingspor abrasives
                               in Western Canada
Klingspor Discs                                                              Save
• Excellent for wood, paint, varnish and filler
                                                      Stock up                  u p to
• Klingspor's best seller!
• PS33 paper                                            Now!                    $79
                                                                            Per Box


                                        5" x 8 Hole          6" x 6 Hole           6" No Hole
                                        40G to 400G          40G to 400G           40G to 600G
                                        DIS V540 to          DIS V640 to           KLI 146716 to
                                        DIS V5400            DIS V6400             KLI 169683

                                        $1995/box $2595/box $2595/box
                                                 of 100                of 100                 of 100

Klingspor Sanding Belts                                                  1" x 30"        4" x 24"
• Aluminum Oxide and Zirconium                                           1 1/ 8" x 21"   4" x 36"
• 36 to 400 grit; varies by size                                         2 1/ 2" x 14"   6" x 48"
                                                                         3" x 18"        6" x 89"
                                                                         3" x 21"        6" x 108"
 Reg. $1.59 to $94.99
 SB 43660 to SB 689802                                                   3" x 24"        15" x 39 1/ 2"

 $1119 to $6649                                                             30% OFF
                                                                           All Sanding
                                                                               Belts

Walter 14"                                         Makita 4 1/2"
Cut-Off Wheel                                      Cut-Off Wheel
• Great for general                                • Type 1 for steel
  purpose cutting in                               • 3/64" Thickness
  ferrous metals                                      Reg. $1.49
 Reg. $10.40                                          MAK D20105
 WAL 10Q143

$895                                               99¢ Save
                                                               33%
Save           Sept 13th To 15th
23%                                                 Also available in 5" $1.19
                   $795                               MAK D21098



                                                   Qwik Kut 14" Diamond
     Cut-Off Wheel                                 Segment Blade
BLOWOUT 75% OFF                                    • Great for general purpose cutting in
                                                     concrete, brick, and manufactured rock
                                                      Reg. $99.99
Premium 4 1/2" and 5"                                 LAC BCC141

Cut-Off Wheels                                     $7995
• Great for ferrous metal cutting and
  notching, including stainless steel
• Type 1 and type 27 available                     Sept 13th To 15th
Compare at $3.99
XX FEI EH11524A
XX FEI EH12524A
XX FEI EHT12524
                                                      $6995
99¢/each                                              Save
                                                       $30


                                                                                SEPTEMBER 2012 27
AIRTOOLS

   1/4" Die Grinders                 Sept 13th To 15th   Heavy Duty 3/4" Impact
   Professional Quality                                  • 1350 ft/lbs of Torque
   • 1/2 HP Motor
   • Adjustable speed                 $69       95       • Built-in muffler, extremely quiet
                                                         • Compact titanium/composite
   • Compact, lightweight design                           body weighs only 7.4 lbs
   • Self-locking throttle
   • Precision machined
                                              Save       • Handle exhaust
                                                           prevents blow back
     gearing delivers maximum                 $40        Reg. $699.99
                                                         IR 2145QIMAX
     power transfer
    Reg. $109.99
   Straight CP 872
   Angle CP 875
                                                         $59995
                                                                        Sept 13th To 15th
                                                            Save
   $79    95
                                                            $120         $57995
   1/2" Impact Wrench                                    3/8" Air Ratchet
   Best Torque in Class                                  • 50 ft/lbs of Torque
   • 920ft/lbs Max reverse torque                        • Fits in tight spaces
   • Heavy duty twin
     hammer design
                                                         • Ball and needle bearing
                                                           construction for durability       Save
   • Full teasing trigger                                Reg. $149.99
                                                         IR 107XPA                            $30
   • Three power settings
    Reg. $369.99
    CP 7748
                     Save                                $11995
   $20995            $160
   1" Impact Wrench                                      5" High Speed Sander
   Best Torque in Class
   • 2140 ft/lbs Max reverse torque
                                             Save        • 18,000 RPM
                                                         • Great for aggressive filler removal,
   • Heavy duty rocking dog clutch           $230          removing rust & paint and grinding welds
   • Industrial 6" long anvil                            • Built-in power regulator
     for extended reach                                  • Includes two backing
   • Swivel inlet prevents    Sept 13th To 15th            pads (3", 5")
     hose kinks                                          Reg. $109.99
   • Includes ergonomic
                                     $619 95             IR 317
     side handle
    Reg. $849.99
    CP 7778B6
                                                         $7995
                                                                    Sept 13th To 15th
                                                         Save
                                                         $40          $6995
   $649        95
                                                         Air Needle Scaler
   3/8" Reversible Drill                                 • For surface preparation
   • 2000 RPM                                              work involving the cleaning
   • Industrial quality                                    or removal of paint, rust,
     Jacob's chuck                                         dirt, or weld slag
   • Handle exhaust                                      Reg. $219.99
                                                         IR 125
   • Rubberized grip
    Reg. $179.99
    CP 9790                                Save          $18995                Save
                                                                                            Sept 13th To 15th


   $12995                                  $50                                 $50          $16995
                                  6" Random Orbit Sanders
                                  • 3/16" Orbit                                             Made
                                  • 79 dB                                                   in USA
                                  • Wrist support enhances operator control
                                    while protecting hand from exhaust

   "Spirit"                                              "Supreme"
   • Reinforced Kevlar                                   • Heavy duty
     construction                                          metal body with
   • Weighs 1.45lbs                                        rubberized grip
    Reg. $219.99                                         • Weighs 2lbs
    DYN 59025                                            Reg. $249.99
                                                         DYN 56826
   $179     95
                 Sept 13th To 15th
                                                         $19995         Sept 13th To 15th
                                                                                            Save
                                      Save
                    $159     95
                                       $60                              $179        95       $70
28 SEPTEMBER 2012
                                                                               AIRTOOLS
HVLP Spray Gun                                 Mini Blow Gun
• Includes 1.4mm tip, plastic paint cup         Reg. $10.99
  and pressure regulator with gauge            Safety Tip Venturi Tip
• Excellent for spraying base/                  TTN 19404        TTN 19405
  clear automotive paints as well
  as some stains and lacquers
Reg. $54.99
                                               $7   95
TTN 19000
                                                         Save
$3995          Sept 13th To 15th
                                   Save                  27%
                $3495               $20
HVLP Touch-Up                                 Dual Action Airbrush
Spray Gun                                     • Spray pattern: Pencil line to 1 1/2"
                                              • 0.35mm Nozzle
• Includes 1.0mm tip and aluminum paint cup   • 1/4oz Gravity feed cup
• Excellent for spraying base/                • Dual-action, internal mix
  clear automotive paints                     • Use with solvent or water based paint
• Narrow spray pattern and compact size        Reg. $49.99
  for detailed work in confined areas           TTN 19551
Reg. $34.99
TTN 19110
                                              $3995
$29    95
                                               Save
                                                                               Sept 13th To 15th


Save
               Sept 13th To 15th
                                               30%                              $3495
28%              $2495                         Aluminum Gravity Feed
Siphon Feed Production                         Paint Cup
Spray Gun                                      150ml           600ml          1000ml
                                                Reg. $8.99      Reg. $10.99   Reg. $13.99
• 1.8mm Needle and nozzle                       TTN 19903       TTN 19900     TTN 19906
  set for heavier materials
• Fully adjustable spray pattern
 Reg. $32.99
                                               $695            $795           $995
 TTN 19418
                         Save                         Save
                                                       up to
$24    95
                         24%                          28%

          $16.95 Each                                       $24.95 Each
3" Cut-Off Tool                      Save     1/4" Air Ratchet
                                     up to
• 20,000 RPM                                  • 18 ft/lbs of torque
• Includes metal blade guard
 Reg. $27.99
                                     39%      • 240 RPM
                                               Reg. $38.99
 WIL M563DB                                    WIL M637                            Save
1/4" Air Die Grinder                                                                up to
• 22,000 RPM
• Variable speed throttle                     3/8" Drive Air Ratchet               36%
Reg. $21.99                                   • 50 ft/lbs
WIL M566DB                                    Reg. $32.99
                                              WIL M560DB
Air Hammer
• 4500 BPM, 1 5/8" Stroke
• Includes spring retainer and                Air Sander
  4 heat treated chisels                      • 8000RPM
Reg. $21.99                                   • Built-in air regulator
WIL M550DB                                    Reg. $38.99
                                              WIL M568DB

         $29.95 Each                          5" High Speed Sander
1/2" Air Impact Wrench               Save     • 16,000RPM
                                     up to     Reg. $32.99
• 230 ft/lbs
• Includes built-in air regulator    31%       WIL M573DB
 Reg. $43.99
 WIL M558DB
                                              1/4" Angle Air Die Grinder
1/2" Air Drill                                • 20,000 RPM
• 500 RPM                                     • 90° Angle head for use
• Reversible                                    in confined areas
• Includes side handle                        • Variable speed throttle
Reg. $42.99                                    Reg. $32.99
WIL M651                                       WIL M656


                                                                         SEPTEMBER 2012 29
COMPRESSORS
   Twin Stack Compressor                                     60 Gallon
   Rebuilt
   • 2 gallon tank, max 100 PSI
                                                             Compressor
   • Great for small air                                     Rebuilt
     nailers and inflating                                    • 10.2 CFM @ 120PSI
   • 1 year warranty                                         • 3.2HP
    Compare at $109.95                                        Reg. $529.99
    XX CHFP209500RB                                           XX CHVT63140RRB

   $4995         1/2                                         $39995 Save
                PRICE                                                          $130

   "The Bull" Twin                                        Contractor's
   Stack Compressor                Sept 13th To 15th
                                                          Compressor Save
   • Fini Pump
                                    $26995                • 6.5 CFM @ 90 PSI         $70
   • 4 CFM @ 100 PSI                                      • 5.3 Gallon tank
   • Twin 2 gallon tanks                                  • Powers two framing
   • Oil lubricated                                         nailers simultaneously
     pump with cast                                       • Folding handle
     iron cylinder                                         Reg. $449.99
   • Lightweight                                           ROL VT25BIG
    Reg. $319.99
    ROL FC2002     Save                                   $39995          Sept 13th To 15th


   $28995          $50                                                    $37995
   Fini Pump Compressor                            14HP Gas Stationary
   • 6.9 CFM @ 100 PSI
   • Twin 9 gallon tanks           Save            Compressor
   • 110V, Low RPM motor                           • Kohler Engine
   • Fini pump                     $130            • 23 CFM @ 175 PSI
                                                   • 30 Gallon tank
   • Flat free tire
    Reg. $829.99                                   • Heavy duty Italian made
    ROL 5715MK103                                    pump with cast iron cylinders
                                                   • Swedish made
   $69995                                            Lammelar valves
                                                       Reg. $2799.99
                                                       ROL 14GR30KK30 Sept 13th To 15th
                                                                                              Save
                                                   $259995 $249995 $300
                                       Full Range of Accessories To Plumb your Shop
   1/4"                               1/4"                                  1/4"
   • 70 CFM Capacity                   Reg. $76.99                           Reg. $149.99
    Reg. $32.99                        NG F72C2ANQE0                         NG W74D2ANNPN
    NG R72G2AKRMN

   $2495                              $5995                                 $11995
   3/8"                               3/8"                                  3/8"
   • 70 CFM Capacity                   Reg. $82.99                           Reg. $159.99
    Reg. $35.99                        NG F72C3ANQE0                         NG W74D3ANNPN
    NG R72G3AKRMN

   $2695                              $6995                                 $12995
   1/2"                               1/2"                                  1/2"
   • 144 CFM Capacity                  Reg. $109.99                          Reg. $239.99
    Reg. $54.99                        NG F73C4ANQD0                         NG W74D4ANNMN       Save
    NG R73G4AKRMN          Save                                Save                                up to

   $39    95
                           up to
                                      $79     95                up to       $189      95
                                                                                                 20%
                           27%                                 22%
   Air Regulators                    Coalescing Air Filters                 Desiccant Filters
   • Provides quick response         • 10 CFM Capacity                      • 10 SCFM Capacity
     and accurate pressure           • 0.01 Micron element for              • Excellent for removing
     regulation for air tools          high efficiency removal of               water from your air lines for
                                       oil and other particles                painting or plasma cutting

30 SEPTEMBER 2012
                                                                    COMPRESSORS
Grip-Rite Compact                       Grip-Rite Compressor
Compressor        Save                  Great for finishing                    Sept 13th To 15th
                                        nailers & airbrushing
Great for finishing
nailers & airbrushing
                             $60        • 2.6 CFM @ 90PSI
                                        • 2 Gallon tank
                                                                                $16995
• 0.6 CFM @ 90PSI                       • Pump rate for
• 1 Gallon tank                           4000 hour life
• 5 amp, Low draw                       • 8 amp low draw
• Weighs only 23lbs                     • Weighs only 37lbs
Reg. $179.95                             Reg. $209.95
GRT GR100                                GRT GR152CM
                                                          Save
$11995                                  $17995 $40
5HP 20 Gal Vertical                       Single Stage
Compressor                                3HP Compressor
Durable Cast Iron Pump                    • 11.3 CFM @ 90 PSI
• 5.2 CFM @ 90PSI                         • 60 Gallon tank
• 20 Gallon tank                          • 230V, 1PH
• Quietest in class                       • 60% Duty cycle
  at only 80dB                            • Cast iron pump
                                             Reg. $849.99
• Oil lubricated
Reg. $749.99                                 IR SS3L3            Save
IR P151VA9            Save                $769       95           $80
$67995                 $70
Single Stage                              5HP Compressor
5HP Compressor                            • 14 CFM @ 175 PSI
                                          • 60 Gallon tank
• 18.1 CFM @ 90 PSI                       • Cast iron two stage pump
• 60 Gallon tank                          • Oil lubricated
• 230V, 1PH                                  Reg. $1699.95
• 60% Duty cycle                             IR 2340L51

                                          $159995 Save
• Cast iron pump
Reg. $1299.99         Save
IR SS5L5
                      $150                        $100
$114995
                             10HP 120 Gal               Save
                             Compressor                 $300
                             • 35 CFM @ 175 PSI
                             • 120 Gallon tank
                             • Cast iron two stage pump
                             • Oil lubricated
  Save                       • Three phase 208V motor
  $200                       • Includes mag switch
                             Reg. $3299.99
                             IR 2545E10V

 7.5HP                       $299995
 Compressor
 • 24 CFM @ 175 PSI
 • 80 Gallon tank
 • Cast iron two
   stage pump                                                15HP Rotary
 • Oil lubricated
 • Single phase
                                                             Screw Compressor
   208V motor                                                • 50 CFM @ 150 PSI
 • Includes mag switch                                       • 120 Gallon tank
 Reg. $2799.99                                               • 200V, 3PH
 IR 2475N751                                                 • 100% Duty cycle
                                                             • Includes refrigerated dryer
 $259995                                                     Reg. $9499.99
                                                             IR UP615CTAS200


  Special Order in                                           $889995 Save
  some locations.
                                                             Available in
                                                              5 - 50 HP         $600
                                                                                     easing
                                                                               KMS




                                                     Leasing available
                                                                      SEPTEMBER 2012 31
NAILERS
  2" 18 Ga Brad Nailer                                    18 Ga 2" Brad Nailer
  • Drives 5/8" - 2" nails                Save            7 Year Warranty                      Save
  • Bump fire/single
    fire trigger                            $60            • Drives 5/8" - 2" brad nails
                                                          • Anti-dry fire                       $50
  • Tool-free depth                                       • Sequential or
    adjustment                                              bump firing
  • Reload indicator                                      • Tool-free depth
  • Adjustable belt hook                                    adjustment
  • Non-marring tip                                       • Swivel air fitting
   Reg. $169.95                                           • Rear exhaust
   MAX NF255F18                                           Reg. $149.99
                                  Sept 13th To 15th
  $119    95                                              BOS BT855K

                                      $10995              $9995
   1 1/2" Narrow Crown Stapler                            1 1/2" 18 Ga Narrow
   • Drives 5/8" - 1 /2" staples
                    1
                                                          Crown Stapler                        Save
   • Bump/single fire trigger
   • Tool-free depth adjustment Sept 13th To 15th         7 Year Warranty                       $30
   • Reload indicator
   • Adjustable belt hook
   • Non-marring tip
                                       $119 95            • Drives 5/8" - 1 1/2" staples
                                                          • Uses Bostitch 7/32"
                                                            crown staples
   Reg. $179.95                                           • Anti-dry fire
   MAX TA238A186                                          • Sequential or bump firing
                                                          • Tool-free depth adjustment
   $12995                                                 • Swivel air fitting
                                                          Reg. $149.95
               Save                                       BOS SX1838K

                $60                                       $11995
  1 3/4" Roofing Coil Nailer                              18 Ga Flooring Stapler
  • Drives 3/4" - 1 3/4" roofing nails                     • Uses standard Bostitch
  • Rapid fire trigger valve                                 Narrow Crown Staples
  • Adjustable depth control
  • Lightweight,
                                         Save             • Tool Free adjustments to accommodate
                                                          • -5/16" to 7/16"solid hardwood floor
    only 5.2lbs
  • Tar resistant nose
                                         $150             • -1/2" to 5/8" engineered
                                                            hardwood/bamboo
   Reg. $399.99                                           • Oil Free operation
   MAX CN445R2                                              eliminates risk of
                                                            oil stains
  $24995                                                   Reg. $249.95
                                                           BOS EHF1838K
                                                                            Save
                                                          $19995            $50
  2 1/2" Siding Nailer                                    Cordless 18 Ga
                                                                                           Sept 13th To 15th
  • Drives 1 1/2" - 2 1/2" wire
    or plastic collated nails
                                      Sept 13th To 15th
                                                          Brad Nailer
  • Adjustable depth control
  • Multi-directional                 $39995              • Drives 5/8" - 2"
                                                            18ga brad nails                $22995
    exhaust cover                                         • Tool free depth control
   Reg. $499.99                                           • Tool free jam clearance
   MAX CN565S                                             • Utility hook
                                                          • Includes 3.6V battery,
  $41995                                                    charger and case
                                                           Reg. $349.95
             Save                                          BOS GBT1850
                                                                           Save
             $100                                         $24995 $120
  3 3/4" 28° Framing Nailer                               Cordless Framing Nailer
  • Drives 2" - 3 1/4" nails at 28°                       • Fires 2 - 3 1/4" 33° paper tape nails
  • Bump fire/single fire trigger                           • Dry fire lockout
  • Adjustable depth control             Save             • Adjustable rafter/belt hook
                                                                                                Save
  • Compact design,                                       • Depth adjustment
    only 12 1/4" tall                     $60             • Includes case,
                                                                                                $230
  • Open nose for easy                                      battery and charger
    jam clearing                                           Compare at $479.99
   Reg. $379.99                                            XX BOS GF33PT
   MAX SN883CH28

  $31995                                                  $24995
32 SEPTEMBER 2012
 Nails Save up 55%
            to
                                                                                   NAILERS
Grip Rite 1 1/4 "                             1 3/8" 23 Ga Headless
Roofing Nails             Sept 13th To 15th   Pin Nailer
• 7200 per box                                5 Year Warranty
Reg. $34.99
NAI CR114                   $1895             • Depth adjustment
                                                and easy jam clearing
$1995                                         • Rear exhaust
                                              • Non-marring tip
                                              • Almost invisible,
                                                no filling required
                                              Reg. $139.99
                                              HIT NP35A            Save
                                              $99    95            $40
                                              2" 18 Ga Brad Nailer
Grip Rite 2 1/4 "                             5 Year Warranty
Ring 15 ° Coil Nails                          • Drives 5/8" - 2"
                                                brad nails
• 3000 per box
Reg. $44.99                                   • Tool-free depth
NAI FC15214HDG                                  adjustment and
                                                jam release
$1995                                         • Reload indicator
                                              • Non-marring tip
                                              Reg. $139.99
                                              HIT NT50AE2          Save
  S av e
  55 %                                        $99    95            $40
                                              2 1/2" 15 Ga Finish Nailer
Grip Rite 2 /4 "      1
                                              5 Year Warranty
Spiral 15 ° Coil Nails                        • Tool-free depth
                                                adjustment and
• 9000 per box                                  jam release
Reg. $54.99                                   • Built-in blow gun
NAI FC15214                                   • Non-marring tip
$2995                                         • Includes safety glasses
                                                and case
                                              Reg. $289.99
                                              HIT NT65MA4       Save
                                              $24995            $40

                                              1 3/8" 23 Ga
3" 15 ° Coil Framing Nails                    Headless Pin Nailer
• 4000 per box                                • Drives up to 1 3/8"
Reg. $43.99                                     pins and brad nails
NAI FC153                                     • Almost invisible,
$2995                                           no filling required
                                              Reg. $329.99
                                              OMER B635

                                              $27995          Sept 13th To 15th     Save
  Sept 13th To 15th

    $2795                                                     $259          95       $70
                                              2" 23 Ga
Magnum Fasteners                              Headless Pin Nailer
3" 28° Framing Nails                          • Double trigger safety
                                              • Drives 7/8" - 2" headless
• 2000 per box                                  pins and brad nails
Reg. $20.99                                   • Almost invisible,
NAI FN283                                       no filling required
$1595                                         Reg. $389.99
                                              OMER B650SS

                                              $34995          Sept 13th To 15th   Save
                                                              $329          95     $60
                                                                             SEPTEMBER 2012 33
WOODWORKING
   JessEm Router Lift FX                                                  Triton 2 1/4 HP
   • Fits most 2HP routers
   • 9" x 11 3/4"
                                                                          Plunge Router
   • Machined and                                                         • 13 amp Motor, 8000
     anodized aluminum                                                      - 21,000 RPM
    Reg. $154.99                                                          • Electronic speed control
    JES 02310                                                               maintains constant

   $13995 Save
                                                                            speed even under load
                                                                          • Plunge depth can be adjusted
           $15                                                              from the bottom of the router
                                                                            when mounted in a router table
                                                                           Reg. $279.99
                                                                           TRT MOF001C

                                                                          $24995
   12pc 1/2" Router Bit Set
   • Thick Carbide for up to 15 Sharpenings
   • 3 Cutting edges for a smoother,
     cleaner surface
   • Most popular bits to suit                                   Sept 13th To 15th
     most applications
   • Hardened steel body
    Reg. $64.99
                                                                 $23995
    DIM WP12123P
                                                                        Save
   $4995                                                                $40
                        Save
                        $25           Sept 13th To 15th

  Also available in 1/4"               $3995                  10" 40T Thin Kerf
    DIM WP123
                                                                                   Save
                                                              Premier Fusion Blade $40
   10" 40T Sawblade                                           • Thin Kerf Fusion tooth design
   • Micro grain titanium carbide tips                          fuses a ATB tooth with a unique
   • Non-adhesive black coating                                 double side grind tooth geometry
    Reg. $52.99
    DIM WP1040A                                               • Provides glass smooth
                                                                finish in: Veneered plywood,
   $3995                                                        hardwoods, melamine
                                                               Reg. $109.95
                                                               FRE P410T

  Sept 13th To 15th
                       Save                                   $6995
   $3495               34%
                                                              10" 50T Combination
   10" x 50T Combination                                      Sawblade
   Sawblade                                                   • Teflon coating resists
   • Micro grain titanium carbide tips                          resin build up                 Save
   • Non-adhesive black coating
    Reg. $81.99
                                                              • Titanium carbide teeth
                                                              • Made in Italy                   $32
    DIM WP1050COM                                              Reg. $81.99
                                                               FRE LU83R010
   $44      95
                                                              $4995
   1/2            Sept 13th To 15th

  PRICE                $3995
   Silky Coarse                              Sanding Belt &                    Titebond White
   Tooth Pullsaw                             Disc Cleaner                      Assembly Glue
   • Adjustable to two angles                Clean Your Sandpaper              • 1 Gallon
   • Replaceable blades                      • 1.5" x 8.5" Bar                  Reg. $22.99
   • Includes case                             Reg. $11.79                      FRA 5026
    Reg. $37.99
    BBT PB34013
                                               WI W1306
                                                                               $1695
   $2995                                     $7    95


   Sept 13th To 15th                         Save         Also available             Save
                        Save                 32%          in 2" x 12" Bar
                                                                                     26%
     $2795              26%                               $14.95
                                                             WI W1307
34 OCTOBER 2012
                                                                             WOODWORKING
Large Pocket Hole Jig                                  Master Pocket Hole Kit
Optimized for large outdoor projects                   • Includes face clamp, base, drill
• 50% Stronger than standard pocket-holes                guide spacer, material support
• For use with 1 ½" materials and up                     stop, dust collection attachment,
• Works with the Kreg Jig Master System                  stepped drill bit, 6" & 3" driver
 Reg. $64.99                                             bit and carrying case
 KRE KJHD                                               Reg. $171.99
                                                        KRE K4MS
$5995                                                  $13995
                                                       Save
                                                        $32

M-Power Profile Scriber                                Incra 6" Precision
• For scribing curved, irregular and
  flat surfaces to fit countertops,                      Marking Rule                          Made
                                                                                             in USA
  shelving, floors, mouldings and more                  • Mark your work instantly
• Includes four rings diameters:                       • Ultra thin for ultra precision
  1 1/8, 2", 2 3/4" & 3 1/2"                           • Micro-fine guide holes
 Reg. $33.99                                           Reg. $10.79
 MPT PSK                                               INC 50601

                                                       $795          Save
$2795          Sept 13th To 15th                                     26%
 Save
 26%             $2495                                 Also available in 12" $14.95
                                                        INC 51201

                                       12" Combination Square
Premium Double Square Save • Cast & ground square,
                                 up to
• 2" Base, 4" satin chrome blade
• Graduated in 8ths, 16ths,
                                        centre and
                                 33% • Graduated protractor
                                                   in 8ths, 16ths,
 32nds, and 64ths                                        32nds and 64ths
 Reg. $14.99                                           • Protractor moves 180° in both directions
 IGA 34244                                             Reg. $64.99
                                                       IGA 342124
$9  95
                                                       $4995
Also available in 4" Base,
6" satin chrome blade
IGA 34266S




Belt & Disc Sander                                     13" Drill Press
• 1" x 30" Belt & 5" Disc                              • Includes 4" Vise
• 2.5 Amp motor                                        • 7.5 amp Motor
• Handle all finishing                                  • 16-Speeds
  operations including                                   210-3600 RPM Sept 13th To 15th
  sanding, surfacing,                                  • Built-in light
  grinding, cleaning and
  deburring on wood,
                                                       • 5/8" Chuck, MT2
                                                         spindle taper
                                                                             $249  95
  metal and plastic                                     Reg. $294.99
Reg. $119.99
KC 702C                 Save                            KC 116FC             Save
$9995                    $20                           $259       95         $45
16" Variable                                           9" Bench Top
                                   Sept 13th To 15th
Speed Scroll Saw                                       Wood Bandsaw
• 400 - 1500 SPM
• Built-in dust                     $9995              • 2 amp 110V Motor
                                                       • Laser guide system
  blower system                                        • Includes blade, mitre
Reg. $129.99
KC 163SSCV
                                          Save           gauge, rip fence and lamp
                                                       Reg. $149.99
                                           30          KC 902C
$109     95
                                                       $12995 Save
                                                               $20
                                                                              OCTOBER 2012 35
WOODWORKING

   10" Cabinet Table Saw                       10" Table Saw
   • 2HP, 110/220V Motor                       • 3HP 220V 1PH US made motor
   • 30" T-fence system                        • 50" General T-fence system
   • Cast iron table                           • Cast iron table
   • Riving knife                              • Riving knife prevents kick-back
     prevents kick-back                        • 495 Lbs for excellent stability
    Reg. $1199.99                              Reg. $2899.99
    GEN 50200RM1                               GEN 350RT50M2M RIGHT TILT
                                               GEN 650RT50M2M LEFT TILT
   $99995                                      $269995
    Save
    $200                                       Save
                                               $200
   i-Carver CNC Machine
   • 13" X 18" Aluminum table
   • 150 Watt variable speed brushless motor   10" 3HP Cabinet Saw
   • i-Picture software included               • 3HP 220V 1PH motor
   • Controller included, no external          • 50" T-fence system
     operating PC required                     • Cast iron table
    Reg. $2099.99                              • New European riving knife
    GEN 40913MI
                                                 prevents kick-back
   $189995                                     • 379 Lbs
                                                Reg. $1999.99
                                                GEN 50275RLKM1
             Save                                                   Save
             $200                              $179995 $200
   i-Carver CNC Machine                        Heavy Duty Belt/Disc Sander
   • 15" x 20"                                 • 1HP 110/220V Motor
   • 2/3 HP                                    • 12" Disc, 6" x 48" belt
   • Easy to learn i-Picture software          • Cast iron tilting tables
   • Includes single seat ArtCAM                Reg. $1029.99
                                                GEN 15015M1
     Express design software.
    Reg. $4699.99
    GEN 40915MI                                $94995
   $439995                                      Save         Sept 13th To 15th


         Save                                   $130         $89995
         $300
   17" Drill Press                              17" Extended Stroke
   • 3/4HP 110V Motor
   • 12 Speeds (340 - 2800 RPM)
                                                Drill Press
   • 5/8" Chuck, M2 spindle taper               • 1HP 110V/220V Motor
   • Built-in work light                        • 12 Speeds (255 - 2750 RPM)
    Reg. $549.99                                • 3/4" Chuck M3 morse taper
    GEN 75200RCM1                               • 6" Spindle travel
                                                Reg. $769.99
   $49995                                       GEN 75260M1


    Save         Sept 13th To 15th              $67995          Sept 13th To 15th
                                                                                    Save
     $70         $479        95                                 $65995              $110
   Benchtop Sander & Grinder                   Bench Spindle Sander
   • 1/3HP, 110V 1PH Motor                     • 1/2HP, 110V Motor
   • 4560 RPM Belt speed                       • Precision ground cast iron table
   • 3450 RPM Grinding speed                   • Includes 2" dust chute and 5 easy
   • Double sealed ball                          interchangeable spindle assemblies
     bearing construction                       Reg. $489.99
    Reg. $214.99                                GEN 15220M1
    GEN 15232M1

   $179    95                                  $44995
                    Save
                    $35                        Save         Sept 13th To 15th

                                                $60          $42995
36 SEPTEMBER 2012
Trend 8' Hinge Door                                                     Snappy 3pc                   Made
                                                                                                     in USA
Template Kit                                                            Hinge Bit Set
• For recessing hinges in 8'                                            • Perfectly centred pilot holes
  wooden doors & frames                                                   for hinges & drawer guides
                                                                           Reg. $44.99
  Includes:                                                                SNA 45300
• 4 x Apertures
• 4 x Bradawls with spacers
• 1 x 1/4" straight
                                                       Save             $3295               Save
  carbide router bit                                    $70                                 33%
• 2 x 5/8" Template guides                                              Sept 13th To 15th
• 1 x Fabric storage case
Reg. $269.99
TRE HJIG8FT
                                             Sept 13th To 15th
                                                                           $2995
$21995                                        $19995
Milescraft Door Mortise Kit                                      Snappy 5pc
• Eliminate confusing
  calculations for                                               Countersink Set
  proper placement       Sept 13th To 15th                       • Heat treated
  of door hardware                                                 hardened steel
• Door thickness
  selector knob            $34      95                           • 5/64" - 1/8" bit
                                                                   with 3/8" counterbore
• Includes 1/2" carbide router                                   • 9/64" Bit with 1/2"
  bit, 5 hinge (square or                                          counterbore
  rounded) templates, 3 strike                                   Reg. $42.99
  plates and latch plates                                        SNA 40030
Reg. $42.99                                                                      Sept 13th To 15th
                                                                                                     Save
MILE 1213                                                        $32    95
                                                                                   $29      95       30%
$3995
                                                                                 WOOD TURNING
Nova DVRXP Lathe
Equipped For Use With Optional
Nova Remote Control                             Includes
                                              FREE
• 1 3/4HP Motor with
  forward and reverse
• Variable speed 100 - 3500 RPM
                                       Heav y Duty
• Swivel headstock for outboard turning Cast iron
• 16" Swing, 24" between centres

• Direct drive motor reduces vibration   stand                                     Save
                                                  $299 Value
Reg. $2199.99
LL DVRXP
                                                                                   $400
$209995
Supernova II       Save                                Turned Pen Disassembly Tool
Standard Chuck Kit $30                                 • Greatly simplifies the disassembly
                                                         of most pen kits
• Our most popular lathe accessory, and a              • Just what you need for "when
  necessity for the modern wood turner                   something goes wrong!"
• Includes standard 2" dovetail jaws,                   Reg. $20.99
  woodworm screw (for bowl starting),                   MW 4987
  and the threaded
  insert adapter
  (your choice) to
                                                       $1399
  fit your lathe
Reg. $189.99
                                                       Sept 13th To 15th
LL 23055
                                                                             Save
$159     95
                                                          $12      99
                                                                             38%
Bullet Style Pen Kit                                   Geoff Pen Kit, Gold Finish
• Click style mechanism                                • Large pen beautifully shows
• Requires bushing                                       off your best woods- sure
  set MW-4989                                            to draw attention
Reg. $10.49                                            • Requires bushing
MW PKBCC                                                 set MW-4990
                                                        Reg. $5.99
$795                               Sept 13th To 15th    MW PKGPG
                       Save                            $499
                       33%            $699                                          SEPTEMBER 2012 37
                                                                                  Sept 13th To 15th
     10.8V Li-Ion Cordless Drill                             Magnum 6pc
     • Fast-Fix Interchangeable Chuck System
     • Weighs less than 2lbs                                 Centrotec      $1795
     • 2 speed gearbox
       0-400/0-1200 RPM
                                                             Robertson Bit Set
                                                             • Fits Festool Centrotec Chucks
     • LED light                                             • Heavy duty impact grade steel
     • Includes 2                                            • Includes 2X #1, 2X #2 and
       batteries, charger,                                     2X #3 robertson bits
       systainer case,                                        Reg. $21.95
       right angle                                            MAG CTBSROB123
       attachment,
       keyless and
       Centrotec                                             $1995
       chucks
      FES 564274                                                   Save
     $330      00                                                  18%
   Rubin 2 Abrasives
   • The best abrasive for bare wood applications
   • Rubin 2 is designed to quickly shed wood fibers so the abrasive stays
     sharp, leading to a 30% faster removal rate than original Rubin
    FES 499093 to FES 499124

   $3000-$3700
   6" Random Orbit Sander                              6" Rotex Dual Orbit Sander
   • Variable speed 6,000-10,500 OPM                   • Variable speed, 3300-6800
   • Rubberized top grip and ergonomic handle            OPM (random orbit), 320-
   • Balanced design for reduced vibration               660 RPM (rotex orbit)
   • 1/8" Orbit for fine to extra                       • Two Orbit modes: "Rotex"
     fine sanding or 3/16"                                for fast stock
     Orbit for intermediate                              removal, "Random"
     to fine sanding                                      for fine finishing
   FES 571786 / FES 571794                              FES 571810

   $360      00
                                                       $62000
   Systainer for Abrasive Discs                    CT 26 Dust Extractor              BE S T
   • Work more efficiently in the shop
     or on the jobsite by having all your
                                                   137 CFM                          SEL L ER
                                                   • 6.9 Gal capacity
     abrasives on hand and ready                   • HEPA Rated filter
                                                   • Quiet at only 62 decibels
  5"                                               • Integrated
   FES 497685                                        systainer dock
                                                   • Foot brake
  $8190                                            • Automatic
                                                     tool start and
  6"                                                 adjustable suction
                                                   • Anti-static hose
   FES 497690
                                                    FES 583492

  $9560                                            $660004 Other Dust Extractors Available
                       The Best Saw You'll Ever Own!
    6 1/4" Plunge-Cut Saw             Parallel Guide Set
    Includes 55" Guide Rail
    • Variable speed 2,000-5,200 RPM
                                      For Plunge-Cut Saws
                                                     • Allows for accurate repeatable rip and
    • Retractable riving knife                         cross cuts with a Festool Plunge-Cut saw
    • Triple motor bearings
     FES 561432                                      • Attain similar results to what would
                                                       normally require a sliding panel saw
    $64000                                             but with complete portability
                                                     • Guide rail not included, any
                                                       size guide rail can be used
     8 1/4"                                           FES P00108
     Version
     FES 561438                                      $37590
     $78000
38 SEPTEMBER 2012
                  18V Li-Ion                       TOOL ONLY                POWERTOOLS
 2pc Combo Kit                        Save        1/4" Hex
 • Includes 1/2" drill                 $80        Impact
   (450 in/lbs), impact                           • 1420 in/lbs of torque
   driver (1280 in/lbs),                          • LED light
   two batteries, charger
   and case
                                                   Reg. $159.99
                                                   MAK LXDT08Z
                                                                                       Save
  Reg. $349.95                                                                          $30
  MAK LCT200 Sept 13th To 15th
                                                  $12995
 $279      95
                 $26995                           LXT 4 1/2" Grinder Save
                                                  • 10,000 RPM
     …or with 1 Hr Charger for $249.95
                                 MAK LCT2005
                                                  • Includes grinding guard,        $50
                                                    cutting guard
                                                    and wrench
 LXT 2pc Combo Kit                                 Reg. $139.99
                                                   MAK BGA452Z
 • Includes 1/2" hammer drill/
   driver (750in/lbs),
   1/4" impact                                    $8995
   driver (1420in/lbs),
   two batteries,
   charger and case                                Jobsite Radio                       HOT
  Reg. $459.99
  MAK LXT218
                                                   Reg. $139.99
                                                   MAK BMR100W
                                                                                       DE AL
 $34995                              Save          $9995 Save
 …or Go Brushless for
 the Same Price MAK LXT239           $110                             $40      Limited Quantities

                 18V Li-Ion          HOT           Li-Ion 12V-28V
 3pc Combo Kit                       DE AL         Jobsite Radio
                                                   Reg. $199.99
 • Includes 1/2" drill (425 in/lbs), 3/8"          MILW 279020
   impact wrench (2000 in/lbs), work light,                            Save
   two 1.5ah batteries, charger and case
  Reg. $469.99                                     $14995 $50
  MILW 269123

 $21995                                            TOOL ONLY
     Save                                         Sawzall                             Save
     $250         Limited Quantities              • 0-3200 SPM, 1" stroke length       $30
                                                  • 6.4lbs
                                                   Reg. $149.99
                                                   MILW 262020
 Fuel Compact
 Hammer Drill Kit                                 $11995
 • Brushless Motor Technology
 • 725 in/lbs of Torque
 • 2 Speed metal transmission:
                                                  1/2" Impact
                                                   Reg. $199.99
   0-550 / 0-1850 RPM                              MILW 266220
 • Includes two 3ah batteries,
   NEW dual voltage charger      Save             $16995               Save
   (M12,M18) and case
  Reg. $429.99                    $90                                   $30
  MILW 260422

 $33995               Add a Fuel Impact
                 for Only $100 MILW 265320

DeWalt 20V Li-Ion                                Makita 2pc 12V                    Save
2pc Combo Kit                                    Li-Ion Combo Kit                  $140
• Includes 1/2" hammer drill (535uwo),           • Includes 3/8" drill/driver (200 in/ HOT
  impact driver (1400 in/lbs), two                 lbs), 3 3/8" circular saw (1400 RPM,DE A L
  3ah batteries, charger and case                  1" cut depth), 2 batteries, charger
Reg. $449.99                                     Reg. $269.99
DEW DCK290L2                                     MAK LCT208

$39995                                           $13995
  Save                            Bonus 3 A
                                             h
  $50                              Ba tt ery      Sept 13th To 15th

     While supplies last                           $12995                   SEPTEMBER 2012 39
POWERTOOLS
                                                                                        HOT
    Milwaukee 3/8" Drill                               Makita 1/2" Drill                DE AL
    • 8 amp Motor, 0-2800 RPM, reversible              • Bonus Mixing Paddle and Bucket
    • All metal chuck and gear case                    • 6.5 amp Motor, 600 RPM
    • Soft grip handle and 2-finger trigger             • Reversible
    Reg. $79.99                                        • Heavy duty rocker switch
    MILW 024020                                        • Double gear reduction
                                                       • D-handle rotates 360°
    $6995                                               Reg. $209.99
                                                        MAK DS4011X

   Save       Sept 13th To 15th            BE S T
                                          SEL L ER
                                                       $16995 Save
    $15        $6495                                                   $40
                                                       Paddle & Bucket While Supplies Last
                            Rotary Hammers             SDS Max Drill
   7/8" SDS Drill                                      • 8.4 amp Motor, 0-510 RPM, 0-2800 BPM
                                                       • 6.6 ft/lbs of impact energy
   • 5.4 amp Motor, 0-1500 RPM, 6200 BPM               • 2 Modes: rotary hammer & chipping
   • 1.0 ft/lb of Impact energy                        • 1 1/2" drilling capacity in concrete
   • 2 Modes: rotation only & rotary hammer             Reg. $499.99
    Reg. $309.99                                        HIT DH38MS
    HIT DH22PG

   $10995                                              $36995
     Save Sept 13th To 15th
                                                                    Save
     67% $9995
                                                                    $130

    Milwaukee 5" Angle Grinder                         Porter Cable 14" Chop Saw
    • 11 amp Motor                                     • 15 amp Motor
    • 11,000 RPM                                       • Heavy-duty guard
    • Non-locking trigger                              • Spindle lock
    • Slim motor housing for easy palm grip            • Ball-bearing design
    • Includes grinding wheel and side handle          • Mitre adjustment
    Reg. $149.99                                        Reg. $199.99
    MILW 612131A
                                          HOT           PC PC14CTSD

    $9995                                 DE AL        $14995
                                       Save             Save        Sept 13th To 15th

                                       $50               $60         $13995
   Milwaukee 7 1/4"                      HOT Makita Reciprocating Saw
   Circular Saw                          DE AL • 9 amp Motor
                                                       • 1 1/8" Stroke, 0-2800 SPM
   • 15 amp Motor
    Compare at $199.95
    XX MILW 639020
                                                       • Quick change blade lock
                                                        Reg. $129.99                          Save
                                                        MAK JR3050TY
                                                                                               $30
   $9995                                               $9995
       Save
       $100                           Sorry!
                                  No Rainchecks
   Freud 2pk 7 1/4"                                                          Orbital Jigsaw
   24T Demo Demon                                                            • 6 amp Motor
   Sawblades                           23pc Jigsaw Blade Set                 • Variable speed
    Compare at $49.99
                                       • Includes 12 wood blades,            • Includes case
    XX FRE D0724DPR                      7 metal blades, 2 fibre                Reg. $119.99
                                         cement board blades                   BOB JS260

   $19   95                            Reg. $39.99
                                       BOA TC21HC                            $9995
                                       $2995
  S av e                               Save
  60 %                                                                    Save
                                       25%
                                                                           $20
40 SEPTEMBER 2012
         BRAND NEW ROCK BOTTOM PRICING
                                             POWERTOOLS
         ON ALL YOUR FAVORITE E-CUT BLADES! Save up 43%
                                                 to

                   1 3/8" E-Cut             Reg. $24.99     2 9/16" E-Cut Japan             Reg. $34.99
                   Saw Blade
                   FEI 63502133017         $15    99        Teeth Blade
                                                             FEI 63502127017               $1999
                   2 9/16" E-Cut            Reg. $26.99     1 1/8" E-Cut Universal          Reg. $29.99
                   Saw Blade
                   FEI 63502134015         $19    99        Bi-Metal Blade
                                                             FEI 63502151018               $1699
                   1 3/8" E-Cut Japan       Reg. $29.99     1 3/4" E-Cut Universal          Reg. $31.99
                   Teeth Blade
                   FEI 63502126013         $17    99        Bi-Metal Blade
                                                             FEI 63502152010               $1799
MultiMaster Start                                      MultiMaster Select
No More Hex Key!                                       "Limited Edition"
Now With QuickIN              Sept 13th To 15th
                                                       • Quick-release, tool-free blade change
Quick Change System                                    • Includes multimaster FMM 250 Q,
• Kit includes 2 blades &
  sanding accessories         $18995                     29 accessories and hard carry case
                                                       Reg. $369.99
                                                       FEI SELECTSET
Reg. $229.99
FEI STARTSET
                                                       $29995
$199    95

   Save                                                   Save
   $40                                                     $70

                                    BE S T             Porter Cable
Palm Router                        SEL L ER            Fixed Base Router
• 5.6 amp Motor, 35000                                 • 11 amp, 1 1/4 HP Motor
  RPM with soft start                                  • Dust sealed switch
• Designed to maintain                                 • Includes 1/4" & 1/2" collets
                                                        Reg. $219.99
  speed under load                                      PC 690LR
• Aluminum fixed base
Reg. $149.99
                                                       $17995          Sept 13th To 15th
                                                                                            Save
BOB PR10E
                Save                                                    $169        95      $50
$9495           $55
10" Compact                                                              AVANTI BLADES
                                   Save                 10" 60T 2pk                                 Save
Jobsite Table Saw                  $120
                                                                                   Reg. $39.99

• 15 amp Motor
• 18" Ripping capacity
                                                        Sawblade Set
                                                        FRE P106060PP
                                                                                $3495                up to
                                                                                                     $15
• -2 - 47° Bevel
  cut capacity                                          12" 80T Blade Contractor 2pk
• Metal roll cage                                       • Contractor grade micro
• Weighs 52lbs                                            grain carbide
                                                        Reg. $64.99
Reg. $499.95                                            FRE P128080PP
BOB GTS1031

$37995                                                  $4995
12" Axial-Glide Mitre Saw
No Need To Accommodate                                 Makita 7 1/2"
Rail Travel
• 15 amp Motor
                                     Save              Sliding Mitre Saw
                                                                                           Sept 13th To 15th

• 14" Horizontal and 6 1/2"
  vertical cutting capacity
                                      $80              Great For Flooring
                                                       & Trim Jobs
                                                                                           $49995
• Up front controls                                    • Extremely lightweight, only 29lbs
• Squarelock                                           • 10 amp Motor
  quick-release                                        • 11 3/4" Cutting
  fence system                                           capacity
Reg. $829.99                                           • 45° Left/ 5° Right
BOB GCM12SD
                                                         bevel capacity
$74995                                                 Reg. $599.99
                                                       MAK LS0714

                                                       $51995 Save
                                                                       $100        SEPTEMBER 2012 41
CONSTRUCTION
    Nebo 3 LED Ballcap Light                                              HOT
                                                      Designers Edge 500W DE A
    • 3 powerful white LED lamps                                               L
    • Water-proof and shock-proof                     Halogen Light
    • Head tilts 90° and rotates 360°                  Reg. $15.99
      to provide light in all directions               DES L20
    • Provide up to 80 hours of
      continuous illumination
     Reg. $9.99
                                                      $1295
     NEB 5094

    $795 Save                                          Sept 13th To 15th
                                                                           Save
             20%                                          $9    95         37%

                                                      50' 12/3 Lighted Yellow
   50' 12/3 Multi Cap                                 Extension Cord
                                                      • Resists oil, grease and ozone and
   Extension Cord                                       will not crack or become brittle
   • Features 5 outlets spaced                        • Includes waterproof, unbreakable
     at 10 ft. intervals                                molded-on lighted connectors
                                                       Reg. $46.99
   • Each outlet features Pro                          XX CWC 16612050
     Cap covers that keep out
     dust, dirt and moisture.
    Reg. $99.99                                       $3495          Sept 13th To 15th
    CWC D12421050
                      Save                             Save
   $7995               $20                             36%             $2995
    Titan 25' x 1"                         Stanley Measuring Wheel
    Tape Measure                           FT/INCHES 12" Wheel
    SAE                                    • Extra Wide tire tread provides
    • Quick-read blade                       excellent surface grip
      markings                             • Wheel is equipped with a kickstand
     Reg. $6.49                            • Measures up to 9,999 feet
     TTN 11125                             • 5-Digit counter with push
                                             button reset
    $395                                   Reg. $69.95
                                           XX ST 77194

   Save                                                                                  Save
                                           $3995                                          $30
   39%
   Stanley Electric Stapler &                        Weiler Boot Brush & Frame
                                                     • Polyethylene bristles remove mud,
   Nailer Combo Pack                                   dirt, grass clippings and other
   • Electric stapler will shoot up to                 debris from boots and shoes.
     9/16" staple and 5/8" brad nails                 Reg. $19.99
   • Comes with bonus hand stapler                    WEI 44391
     and 2 boxes of staples
    Compare at $49.99
    XX ST TRE550/45
                                                     $1495
   $2995             Save                                    Save
                     40%                                     25%
                                                      Hi-Viz 48 Pocket Bucket
                                                      Organizer
    Hook Drill Holder                                 • Fits most 3 1/2 - 5 gallon buckets
    • Made from ballistic nylon                       • 14 Double row pockets inside and
    • Hook swings & locks away                          34 triple row outside wide range
      when not in use                                 • Drill pocket with hook and
    • Convenient elastic webbing                        loop handle strap
      holders for driver bits                          Reg. $24.99
    Reg. $9.99                                         KUN 141119
    KUN 5024

    $795 Save                                         $1495
              20%                                     Save        Sept 13th To 15th


42 SEPTEMBER 2012
                                                      48%            $1295
                                                                              CONSTRUCTION
  QEP 12" Tile Cutter                                   QEP No Spin Mixing Bucket
  • Cuts wall and floor tile up to                       With engineered molded base
    12" wide, 8" diagonally                             • 5 Gallon capacity
  • Lightweight, compact and easy to use                • Heavy-duty plastic
  • Reinforced steel base with rubber                   • Patented 1 1/2" notch in base
    padded non-slip surface                               prevents spinning during mixing
  • Equipped with long lasting 1/2"                     • Use common items to secure the
    tungsten carbide cutting wheel                        bucket, including garden hose,
   Reg. $19.99
   QEP 10267                                              rebar, pipe, and wood strip
                      Save                               Reg. $7.99

  $16    95
                      25%
                                                         QEP 78211
                                                                      Save
                                                        $595 25%
Sept 13th To 15th

  $1495                                                 Vazit Drywall Template Tool
                                                        For Electrical Boxes              Rectangular
                                                        • Slips over the electrical box    Reg. $12.99
                                                          before covering with drywall     VAZ VAZ101
  DeWalt 6" Jab Saw                                     • Template rod punches through    Octagonal
                                                          drywall to elimate               Reg. $13.99
   Reg. $16.99                                            measuring and                    VAZ OCT102
   DEW DWHT20540
                           Save                           makes an exact
  $12     95
                           23%
                                                          cutout hole

                                                        $995
                                                        Save
                                                        up to
  Magnum Panel Toter                                    28%
  • Carry plywood and drywall
    sheets with ease
  • Comfort vinyl grip on handle
   Reg. $11.99
   MAG SPQ54

  $995                                                  7" X 3" Pointing Trowel
                                                        • Tempered blade that is fully
                Sept 13th To 15th                         ground and polished
  Save                                                  • Hardwood handle
  33%               $795                                 Reg. $4.29
                                                         MRT 925

                                                        $295                               Save
  10" Drywall Taping Knife                                                                 31%
  • Flexible blue spring steel blade
  • Tapered blade for corner work
  • Lightweight plastic contoured handle
                                                        Drywall Circle Cutter
  • The most lightweight yet durable                    • Cuts sharp clean circles up to 16"
    taping knife on the market                            diameter with only one hand
   Reg. $8.49                                           • Hardened cutter wheel and center pin
   MRT BSTK10P                                           Reg. $12.99
                                                         MRT CC766
  $695                                                  $995
                                                         Save
  14" x 4" Curved Base                                   23%
  Finishing Trowel
  • Highest grade hardened and
    tempered spring steel blade                         30" Die Cast Mud Mixer
  • Used for finishing concrete surfaces                 • Great for stirring thinset,
    to required smoothness                                grout, drywall mud or paint
   Reg. $41.99                                          • Fits any 1/2" or larger slow speed drill
   MRT MXS64D
                                                        • Blade measures 8 1/2" x 4 1/2"
  $3495                                                 • 30" Shaft
                                                         Reg. $15.99
                                                         MRT DCM30

     Save                           Sept 13th To 15th   $1295
     28%                              $2995
                                                                                 SEPTEMBER 2012 43
SAFETY                       Save             CSA Approved Safety Glasses
                              up to
  Sentinel      37% HOT                                  Citation 931
  Safety Glasses    DE AL                                Safety Glasses
  • Lightweight,                                         • Super lightweight
    impact resistant                                       wraparound design
    polycarbonate lens                                   • Impact and scratch
    provides 99.9%                                         resistant polycarbonate
    UV protection and                                      lens provides 99.9%
    scratch resistance                                     UV protection
   Reg. $3.19 - $7.39                                     Reg. $3.19 - $4.29
   USS 12E90801                                           USS 12E93101
   to USS 12E90825                                        to USS 12E93105

  $199 - $495 Blue MirrorAmber Mirror $199 - $249
                   Grey                                                             Grey Yellow
                                                                               Mirror Blue Mirror
   Uvex Bionic Faceshield                                 NorthGen
   • CSA Approved
   • Excellent optics and                                 Disposable Coveralls
     increased visibility                                 • CE Type 5 & 6 protection
   • Easily replaceable visor                               - resistant to noxious
     with dual position choices                             dust and splash
   Reg. $40.76                                            • Breathable material
   UVEX S8500                                             • 2-Way zip, storm flap
                                                          Reg. $6.39
   $2695                                                  NTH 35596L to 35596XL


   Save
                Sept 13th To 15th
                                    All Replacement
                                                          $549
   38%            $2495             Visors 30% OFF
                                       from $636                    Others from $2.99
                           Save             15% OFF All North Filters & Cartridges
                            up to

  Half-Mask 20% 5400 Series          Welding
  Respirator    Full Face Respirator Backpack Adapter
  • Elastomeric Facepiece              • Soft, lightweight               • Attaches to cartridge
  • Comfortable, lightweight             elastomeric full facepiece        connections of North
    non-allergenic facepiece           • Equipped with an oral / nasal     half and full facepieces
  • Cartridges sold separately           cup to reduce fogging           • Cartridges on worker's
   Reg. $12.52                         • Filters and cartridges            back, away from
   NTH 550030M                           sold separately                   work zone,
   NTH 550030L                          Reg. $104.13                       providing room
                                        NTH 54001
  $10    95                                                                for a welding
                                                                           helmet
                                       $9995                              Reg. $72.25
                                                                          NTH BP1002
  Sept 13th To 15th
                                                                         $5995
       $995
  All Howard Leight Reusable Save                                                      10 Mo re
                                                                                  Sty les Available
  Ear Plugs
                      ON SALE!
                              up to
                                                   25%                                  Instore

  Clarity                      Pilot                   Quiet                   Airsoft
  • NRR 21db                   • NRR 26db              • NRR 26db              • NRR 27db
   HOW 1005329E                 HOW PLT1               HOW QD1EA                HOW DPAS1EA

  $1 49
                               29¢                     35¢                     79¢
  All Watson Seamless Knit                                     Howard Leight T1
  Dipped Gloves
   • Nitrite, Rubber,
                             30% OFF                           Thunder Ear Muff
                                                               • NRR 26
                                                               • Dielectric construction
     Polyurethane,                                             • Patented air flow control
     Foam Nitrate                                                technology for optimal
   • Cut level 3, 5,                                             attenuation across all
     and Hi vis                                                  frequencies
   WG 320L to                                                  Reg. $11.36
   WG PU1000XL                                                 HOW 1010928

   $223 - $1257                                                $995
44 SEPTEMBER 2012
                                   OUTDOOR POWER EQUIPMENT
 2700 PSI Pressure Washer Save            90 Degree
 5HP Honda GC 160cc Gas Engine $40        Pivot Coupler
 • 2.5 GPM Italian made axial pump                                             Reg. $15.99
 • Includes: 3 cleaning tips, 1 soap tip, low
   pressure chemical injector,
                                                                               BE 85300172                  Save
                                                                                                             up to
   25' hose and 36" gun
  Reg. $569.99                                                                $12     95
                                                                                              39%
  BE P275HC
                                                                              2500 PSI Rotary
 $54995                      Sept 13th To 15th
                                                                              Nozzle Dirt Blaster
   FREE Broom.               $52995                                            Reg. $40.99
                                                                               BE 85210170
     Wa ter
   12"
   During 3 Day Sale
    BE 85400060                                                               $2495
 3100 PSI Pressure Washer                                      3700 PSI Pressure Washer
 7HP PowerEase 210cc Gas Engine                                13HP Honda GX 390cc Gas Engine
 • 2.3 GPM Axial pump                                          • 4.0 GPM Italian made Comet Triplex pump
 • Includes: 3 cleaning tips, soap tip,                        • Includes: 3 cleaning tips, 1 soap
   low pressure chemical injector,                               tip, low pressure chemical
   25' hose and 36" gun                                          injector, 50' hose and 36" gun
  BE P317RXD                                                    Reg. $1299.99
                                                                BE P3713HC
 $349        95
                                                               $119995
        FREE
        "Bull's Eye" hose
        nozzle. $15 value.
            BUL 810C
                                                                 Sept 13th To 15th
                                                                                                          Save
                                                                 $114995                                  $150
 Buddy Portable                                  Single Burner                       125,000 BTU
 9,000 BTU                                       14,000 BTU                          Propane Heater
 Propane Heater                                  Propane Heater                      • Runs up to 11 hours
                                                                                       on a 40lb tank
 • Runs up to 110 hrs on                         • Runs up to 52 hours on            • Heats up to 3000 sq ft
   a standard 20lb tank                            a standard 20lb tank              • 110V Powered fan for
 • Heats up to
   200 sq ft
                               Save              • Directly connects to
                                                   a 5 - 20lb cylinder
                                                                                       maximum heat distribution
                                                                                      Reg. $229.99
  Reg. $129.99
  MH BUDDY
                               $40               Reg. $79.99
                                                 MH SRC15TT
                                                                                      MH 125FAV


 $9995                                           $4995                               $18995          Sept 13th To 15th


                                                   Save                               Save            $17995
Sept 13th To 15th
                                                    $30                               $50
  $8995
Big Buddy 18,000 BTU                 Reg. $189.99
                                     MH BIGBUDDY          30,000 BTU                  Reg. $129.99
                                                                                      MH SRC30TT
Propane Heater                      $12995                Propane Heater              $8995
   XG Series 4000W Generator                                   iX Series 2000W
   • 33.3 amps @ 120V Running
   • 5000 Starting watts                                       Inverter Generator                    Sept 13th To 15th
   • Four 120V GFCI and one twistlock                          • 17.4 amps @ 115V Running
     120/240V outlets
   • Runs 13 hours at 50%
                                                               • Two 115V and one 12V outlets
                                                               • Low noise                           $59995
   • 2 Year limited          Sept 13th To 15th                 • Saves fuel and reduces
     residential or 1                                            wear by adjusting engine
     year commercial
     warranty
                                    $899  95                     speed to load
                                                               • Great for RVs,
    Reg. $1059.99                                                camping and more
    GNR 5843                                                   Reg. $689.99
                                                               GNR 5793
   $92995                                                                            Save
                                                               $61995                 $90
        Save
        $160                                                                               SEPTEMBER 2012 45
                                                                 kmscarparts.com
                                                                   604-522-5593
                                                                  1-800-567-8979
                                                                      We can ship to your
                                                                     nearest KMS location!
                                                          Product Stocked in all locations
                                                      Product Not not stocked in allLocations

   Finned Aluminum Air Cleaners Save
   • Oval
   • Aluminum full
     finned top
                          12"
                          Reg. $89.99
                                        15"
                                        Reg. $99.99
                                                         $10
   • Fits 4 barrel carb   1CHR 6313     1CHR 6318

                          $7995 $8995
   Chrome Velocity Stack                 Chrome Engine Dress Up Kit
   • Washable foam element               • Small block Chevy
   • Height 4 1/4" and width 8 3/4"      • Includes valve covers,
   • For 4 barrel carbs                    breather cap, timing cover,
    Reg. $19.99                            timing tab, dipstick, and
    1CHR 2104                              rubber grommets
                                          Reg. $49.99
   $1795                                  1CHR 3023

                                         $4495
   Keep It Clean Colour Coded                  Universal Turn Signal Switches
   Wiring Harness                              Chrome Steel                       Chrome Die Cast
   • 15 Fuse, 24 circuit
   • Wire is labeled every inch                • Green light on                   • Hazard warning
    Reg. $299.99                                 indicator handle                   system and
    1HOF KICKZ                                   and column clamp                   column clamp
                                                Reg. $29.99                        Reg. $34.99
   $24995                                       1ACC 50080                         1ACC 50070

                                               $2595                              $2995

                                      Save
                                      $50
   Shifter Boots                               7" Dual Diaphragm
   • Rubber with
     chrome ring                               Power Booster
                                               • Great for fitting into tight
                          5 5/8" x 6 3/4"        engine compartments
                          Reg. $13.99           Reg. $89.99
                          1CHR 9630             1MBM PB7537
                                                                      Save
                          $1195                $7995                   $10
                          7 3/4" x 8 3/4"      Chrome Version
                          Reg. $21.99           Reg. $119.99
                          1CHR 9631             1MBM PB7537C
                                                                      Save
                          $1895                $10495                  $15
   10" Floor Mount                                      Polishing Class
   E-Brake Handle
   • Includes mounting brackets
    Reg. $98.99                                         October 13th
    1HOF VPABH10
                                                        9:30 - 2:00
   $89    95                                            Instructor: Bodo Reichert
                                                        $55 (+tax)
                                                        *Coquitlam store only
                                                        *Class registration must be paid
                                                         in advance to secure your spot

46 SEPTEMBER 2012
     Nostalgic Tin Signs
      Reg. $14.99

     $995/each
      Over 500om!to
      choo se fr

     Air Management System                                                                              Best Air Ride K
     Electronically Level And Play With Your Airbags                                                    on the Market!it
                                                                                                                       !
     • Neat and tidy installation
     • Electronic leveling touch pad
     • Includes two Viair 400C compressors, 5 gallon
       aluminum tank, four corner height sensors, 3/8"
       valve block, wiring harness, air line and fittings
      Reg. $2299.99
      Black 1ACU AMP2TPADBA
      Silver 1ACU AMP2TPADEN                  Sept 13th To 15th     Save
     $219995                                  $2099          95     $200
                                                                  • Front       • Vent                 • Upper
      GM Pick-Up                                                     Windshield                          Channel
      Weather Strip Kits                                                                                        • Rear
      • Complete Kits For
        47-72 GM Pick-ups                                                                                         Windshield
                                                                                                          • Door
                                                                                                            Weather
      Starting at                                                                                           Strip
                                                                                                   • Window
      $260    95                                                                        • Division Felts
                                                                                          Post

      Gas Pedals
      Polished Aluminum                                         Chrome Steel
      Oval               Round             Rectangle            Oval
       Reg. $58.99 Reg. $49.99 Reg. $49.99 Reg. $35.99
       1CHR 9507X 1CHR 8506 1CHR 8601POL 1CHR 9507

      $5295 $4495 $4495 $3239
                                       KMS Tools Advertising Policy
  It is our intention to have every advertised item in stock. Occasionally, an advertised item may not be available due to
  circumstances beyond our control. If this happens, KMS will offer a rain check or sell a similar item at a comparable price. Special
  Purchases, Bonus items and Limited Quantity purchases may not be subject to the above conditions due to the nature of the
  promotion, however we make every effort to clearly identify those items within the flyer. Prices are in effect for the month of
  September, 2012. We reserve the right to limit quantities. In the event of an error, the intended price shall prevail. Lease prices are
  estimates, before taxes, based on a 36 month term, OAC. Actual products may not be exactly as shown. Please call for details.


KMS TOOLS COQUITLAM                                     KMS TOOLS LANGLEY                            KMS TOOLS VICTORIA
Next to the IKEA store                                  #110, 19860 Langley Bypass                   1652 Island Highway
                                                        Langley, BC V3A 4Y1                          Victoria, BC V9B 1H8
Store & Head Office                                      Ph: 604-534-4853 Fax: 604-534-4928           Ph: 250-391-4555 Fax: 250-391-4554
                                                        Toll Free: 1-888-530-6278                    Toll Free: 1-877-848-6657
110 Woolridge Street,                                   Email: langley@kmstools.com                  Email: victoria@kmstools.com
Coquitlam, BC     V3K 5V4                               Mon-Fri 730 to 530 • Sat 900 to 500          Mon-Fri 730 to 530 • Sat 900 to 500
Ph: 604-522-5599 or 1-800-567-8979 Toll Free            Closed Sun.                                  Closed Sun.
Fax: 604-522-0638 or 1-800-567-3799 Toll Free
Email: coquitlam@kmstools.com                           KMS TOOLS ABBOTSFORD                         KMS TOOLS RED DEER
Mon-Fri 800 to 600 • Sat 900 to 500                     Off Hwy #1 at Mt. Lehman Exit                Next to Red Deer Mitsubishi
Closed Sun.                                             30824 South Fraser Way                       53 Burnt Park Drive,
                                                        Abbotsford, BC        V2T 6L4                Red Deer, AB T4P 0J7
KMS C.A.R. Parts                                        Ph: 604-853-5598 Fax: 604-853-5593           Ph: 403-347-3990 Fax: 403-347-7326
Ph: 604-522-5593 Fax: 604-522-1381                      Toll-Free: 604-856-5988 (Greater Van)        Toll Free: 1-888-344-3990
Email: carparts@kmstools.com                            Email: abbotsford@kmstools.com               Email: reddeer@kmstools.com
Mon-Fri 800 to 500 • Sat 900 to 500                     Mon-Fri 730 to 530 • Sat 900 to 500          Mon-Fri 800 to 530 • Sat 900 to 500
Closed Sun.                                             Closed Sun.                                  Closed Sun.

KMS Tool Repair                                         KMS TOOLS KAMLOOPS                           KMS TOOLS EDMONTON
                                                        Off Trans-Canada Hwy next to Costco          14520 111 Ave NW,
Ph: 604-395-4134 Fax: 604-522-4017                      1780 Versatile Drive                         Edmonton, AB T5M 2P4
Email: repairs@kmstools.com                             Kamloops, BC V1S 1S2                         Ph: 780-455-8665 Fax: 780-455-8661
Mon-Fri 800 to 545 • Sat 900 to 500                     Ph: 250-374-7300 Fax: 250-374-7379           Toll Free: 1-877-655-8665
Closed Sun.                                             Toll Free: 1-888-KMS-TOOL (567-8665)         Email: edmonton@kmstools.com
                                                        Email: kamloops@kmstools.com                 Mon-Fri 730 to 530 • Sat 900 to 500
                                                        Mon-Fri 800 to 530 • Sat 900 to 500          Closed Sun.
                                                        Closed Sun.
KMS DISTRIBUTION LOCATIONS
                                                        KMS TOOLS KELOWNA
Albertson's Building Centre                             158 Penno Road
1187 Franklin's Gull Rd, Parksville, BC                 Kelowna, BC V1X 6S2
Ph: 250-248-6888 • Fax: 250-248-6960                    Ph: 250-765-9665 Fax: 250-765-4318
                                                        Toll Free: 1-888-922-9665
Beaver Creek Home Centre                                Email: kelowna@kmstools.com
4643 Gertrude St, Port Alberni, BC                      Mon-Fri 800 to 530 • Sat 900 to 500
Ph: 250-724-1291 • Fax: 250-724-4700                    Closed Sun.                                      SEPTEMBER 2012 47
                                Monthly Tool Giveaway
                                Register for the KMS Club with your
                                e-mail address for your chance to                                WIN
                        This Month's                    Makita 7" Sander/
                        Giveaway:                       Polisher Kit
                                                        • Variable Speed Dial
   If you already receive                               • Electronic Speed Control
                                                           MAK 9227CX6
   our e-mails, you are                                 $29999 Value!
   automatically entered!


                                                                              PRESENTED BY:
                                                                               kmstools.com/woodshows

                                             Featuring                        KMS Victoria & KMS Kelowna
                                             Paul Moore
                                             the Crazy
                                                                                      October 11th-13th
                                             Canadian                       KMS Coquitlam         KMS Edmonton
                                             Woodworker
                                                                            October 18th-20th     October 25th-27 th
CHECK OUT THE BOOTHS:
                          General              Dream

                                                                                           FREE
                          Woodworking          Workshop
                          Machinery
                                        Giveaway
                                                                            • Admission • Parking
                                                                            • Smokies, Pop & Popcorn
                          $7000
                          Value!        See Instore or Online for Details
                                                                            • Live Demos & Seminars
 MAY VARY BY LOCATION




         See us                                                                                 Saturday,
         at the                                                                                 September 8th


                        Late Night Fridays
                                                                              Tools
                                                                              For The
              • Cool Cars
              • Great Prizes
              • Free Eats



                                                                              World
              • Late Shopping
                Langley &
                  Victoria
            Friday nights until 9:00 all Summer long!
                        Bring your cool car!
                                                                                                 od used
                                                                                 Donate your goity building
                                                                                            mun
                                                                               tools for com the world
                                                                                     around
                                                                               Old Tools Giving New Hope




                                                                                      Drop off at any KMS store
        kmstools.com/blog                                                            Thank you for your generosity!

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:1/10/2013
language:English
pages:48