Trailers

Document Sample
Trailers Powered By Docstoc
					Trailers

     DOONAN


                                                                                       53’ SINGLE
       482 DB 14M                                                                      DROP STRETCH
       Length: 48 ft. (8 ft. upper)            Pocket design: 24-in. centers           Length: 53 ft. to 72 ft.
       Width: 102 in.                          Tie-downs: Sliding winches;             Width: 102 in.
       Height: 35 in. and 40 in.                  pipe spools; captive lock system     Height: 35 in. and 40 in.
       Fifth wheel height: 48 in.              Axles: ArvinMeritor or Hendrickson      Floor Type: Apitong or aluminum
       Distributed load capacity: 90,000          Intraax                              Crossmember: 12 in. and 14 in.
          GVW                                  Suspension: Hendrickson Intraax, rear   Side rails: 6-in. structural steel
       Concentrated load capacity: 55,000         axle slide                           Tie-downs: Chain ties or “D” rings
          lb. in 10 ft.                        Brakes: ArvinMeritor Quick-change       Axles: Watson & Chalin
       Floor type: Apitong and                 Brake drums: Fused; cast                Suspension: Hendrickson
          aluminum with nailers                Auto-slack: Haldex                      Brake Drums: Fused or cast
       Crossmember: Steel with 12-             ABS: ArvinMeritor 4S/2M                 Auto-slack: Standard
          and 14-in. centers                   Wheel ends: Meritor                     ABS: Meritor WABCO
       Side rails: 6-in. structural steel or   Lighting: Grote                         Lighting: Grote
          6-in. aluminum                       Finish type: Polyurethane               Finish Type: Black (standard)




                                                   Circle 106 on Reader Service Card


98   OVERDRIVE SPEC GUIDE 2008
eAsT




ALuMiNuM BsT                                                      ALuMiNuM FrAMeLess duMp
Length: 48 ft.                                                    Length: 39 ft. Genesis
Width: 102 in.                                                    Width: 96 in.
Weight: 9,070 lb.                                                 Weight: 10,360 lb.
Nose style: Square                                                Side height: 60 in.; options available
Kingpin: 30 in.; options available                                Side construction: Genesis panel design
Crossmember: 22 in., with coil package; options available         Crossmember: 12 in.
Suspension: Meritor 230 FS; options available                     Tailgate: Full height, Genesis design, 0.140-in. rubber-sealed,
Lift axles: Options available                                        coal/grain door, safety winders
Lowering kit: Meritor auto dump; options available                Chassis sub-frame: Aluminum I-beam
Axle spindle: TQ; options available                               Kingpin: 16 in.
Axle spacing: 121 in.; options available                          Suspension: AAT30K air ride; options available
Axle-to-rear: 30 in.; options available                           Axle spindle: TQ; options available
Hubs: 10-stud lightweight steel, hub-piloted; options available   Hubs: 10 stud lightweight steel, hub-piloted; options available
Brake drums: Centrifuse; options available                        Brake drums: Centrifuse; options available
Auto-slack: Meritor; options available                            Auto-slack: Meritor; options available
ABS: 4S-2M                                                        ABS: 4S-2M
Wheels: Aluminum 8.25 in. x 22.5 in.; options available           Wheels: Aluminum 8.25 in. x 24.5 in.; options available
Tires: 11R 22.5; options available                                Tires: 11R 24.5; options available
Landing gear: Two-speed, five-year zero maintenance               Landing gear: Two-speed Holland
Pockets: Heavy-duty 1.625-in. x 3.5-in. inside dimension          Lighting: LED, nine across rear, five side markers; midnight
Tie-downs: Integrated winch track both sides; optional straps,    turn signals
   rope hooks, winches                                            Hydraulics: 108-in. hose with wing-nut fitting
Mudflaps: At rear tires                                           Electrical: Seven-way coupler
Lighting: LEDs, nine across rear, five side markers               Options: Various body packages, custom mud flaps,
Options: Toolboxes, bulkheads, tire carriers and accent tape         other accessories




                                                                                                      2008 Overdrive spec guide     99
Trailers

      FONTAINE




      VELOCITY STEEL                                INFINITY SX                                  PHANTOM ALUMINUM
      DROPDECK                                      COMPOSITE FLATBED                            FLATBED
      Length: 53 ft.                                Length: 48 ft.                               Length: 48 ft.
      Width: 102 in.                                Width: 102 in.                               Width: 102 in.
      Height: 40 in. (loaded)                       Fifth wheel height: 49 in.                   Height: 53 in. at rear
      Fifth wheel height: 49 in.                    Distributed load capacity: 80,000 lb.        Fifth wheel height: 49 in.
      Distributed load capacity: 80,000 lb.         Concentrated load capacity: 55,000           Distributed load capacity: 80,000 lb.
      Concentrated load capacity: 55,000 lb.           lb. in 5 ft.                              Concentrated load capacity: 68,000 lb.
         in 5 ft.                                   Flooring: 1.125-in. aluminum with four          in 4 ft.
      Floor: 1.125-in. wood – continuous floor         wood nailer strips                        Floor: Aluminum with three wood nailer
      Crossmember: 18-in. centers front deck;       Main beams: Minimum grade 130                   strips
      12-in. centers rear deck; 4-in. junior           flanges and 25-in. deep one-piece web     Crossmember: Aluminum on 22-in.
          I-steel                                   Crossmember: 12-in. centers – 4-in.             centers
      Rub rail: 2.5-in. rolled formed steel            junior I-steel                            Rub rail: Extruded aluminum – full-length
      Side rails: 6-in. structural channel at 6.5   Single coil hauling package: 2 full-            each side
         lb.-ft. – full length on rear deck            depth crossmembers and 2 stub             Side rails: Extruded aluminum
      Pocket design: Steel on 24-in. centers           crossmembers                              Pocket design: Aluminum on 24-in.
      Axle: Hendrickson Intraax                     Side rails: 5.75-in. extruded aluminum          centers on sides; three each at front
      Suspension: Hendrickson                       Stake pockets: Aluminum on 24-in. centers       and rear
      Brakes: Abex 30/30                            Pipe spools: Double spools between           Tie-downs: 15 pair – recessed in side
      Brake drums: Webb                                stake pockets                                rails
      Auto-slack: Haldex                            Rub rail: 3-in. extruded aluminum            Axles: Hendrickson
      ABS: Meritor WABCO                            Suspension: Hendrickson                      Suspension: Hendrickson
      Wheel ends: Buttoned up                       Brakes: Spring brakes, auto slacks           Brakes: Abex 30/30
      Lighting: LEDs, five lights per side, three   Hub and drums: 10-hole hub-piloted with      Brake drums: Walther EMC Dura-Light
         lights per side on rear                       outboard cast drums                       Auto-slack: Haldex
      Finish type: Black urethane with Velocity     Tires: 11R 24.5 14PR OEM standard            ABS: Meritor WABCO
         decals                                     Wheels: 24.5-in. x 8.25-in. steel disc       Wheel ends: Buttoned up
      Impact guard: Bolt-on type                    Wheel ends: Buttoned up                      Lighting: LEDs, nine lights per side, three
      Spare tire carrier: One mounted between       ABS: 4S/2M – no cable or tool                   lights per side on rear, four lights center
         gooseneck beams                            Lighting: 5 LEDs side; 3 LEDs rear              rear panel
      Electric dump valve: Wired to seven-way       Finish type: Black urethane on steel parts   Finish type: Aluminum – steel parts
         auxiliary socket                              with Infinity decals                         painted black
                                                    Winch track: Full-length integrated
                                                       aluminum on road side
                                                    Sliding winches: 12 standard – without
                                                       straps




100   OVERDRIVE SPEC GUIDE 2008
GREAT DANE



                                              FREEDOM FLATBED
                                                                                             CLASSIC DRY VAN
                                              Length: 48 ft.
SUPERSEAL                                     Width: 102 in.                                 Length: 53 ft.
REFRIGERATED                                  Height: 55-in. rear deck                       Width: 102.36 in.
                                              Coupler height: 48 in.                         Height: 13.6 ft.
Length: 53 ft.                                Kingpin location: 30 in.                       Coupler height: 47 in.
Width: 102.31 in.                             Front crossmember: 8-in. deep steel            Kingpin location: 36 in.
Height: 13.6 ft.                                 front DOT rated                             Inside height: 110 in.
Kingpin location: 36 in.                      Corners: 5-in. diagonal steel                  Front wall: Six 2.5-in. deep steel hat
Inside height: 103.75 in.                     Side rails: Extruded aluminum, 6-in. depth        section front uprights
Front wall: 1.63-in. aluminum Z front         Pockets: 0.25-in. extruded aluminum,           Corners: 6-in. aluminum front corners
   post with all-aluminum reefer bracing         1.81-in. x 3.38-in. inside diameter         Air, electrical: Offset to roadside
Corners: 6-in. extruded aluminum front        Rub rail: 0.38-in. x 3-in. extruded            Sides: 1.13-in. steel hat section uprights
   corners with pre-painted white aluminum       aluminum with double pipe spools and           on 12-in. and 24-in. centers; logistic
   insert, stainless steel available             reflective tape recess                         post optional; 0.05-in. prepainted white
Sides: 1.13-in. aluminum J upright on         Rear frame: 0.31-in. extruded aluminum            flat or corrugated aluminum side sheets
   8-, 16- and 24-in. centers; 0.040-in.      Winches: 10 on full-length roadside track      Roof: 0.40-in. aluminum sheet with bows
   prepainted white flat or corrugated        Floor: 1.25-in. aluminum with four apitong        on 24-in. centers
   aluminum side sheets; 0.035-in.               nailing strips                              Rear doors: 0.50-in. composite swing;
   corrugated stainless steel (optional)      Chain ties: 12 pair pull-up ties evenly           prepainted white cover sheets with
Roof: 0.04-in. aluminum sheet with               spaced, recessed in outside nailing strip      Galvalume inner lining; stainless steel
   aluminum bows on 32-in. centers            Upper coupler: 0.25-in. plate, welded             cover sheets (optional)
Rear doors: Aluminum frame swing;                steel upper coupler                         Floor: 1.38-in. laminated hard wood
   pre-painted white aluminum cover           Crossmember: 4-in. steel on 16-in.             Scuff band: 12-in. high-roll formed steel,
   sheets (standard); stainless steel            centers, with four between main beams          full length
   (optional)                                    in coil area                                Interior options: Overlaid or recessed
Interior lining: 0.06-in. high glass          Suspension: Hendrickson AANT-230                  track; various scuff bands; aluminum
   content flat white fiberglass lining          fixed air ride with 121-in. axle spacing;      cargo floors; interior and ceiling linings
Floor: 1.38-in. heavy duty, aluminum duct        Hendrickson tapered spindle axle;           Crossmember: Front – steel hat type for
   for maximum air return; flush rear            16.5-in. x 7-in. drums with S-cam              tire protection between support gear
   gutter; four drains                           brakes; Haldex automatic slack adjust-         and coupler; bay and side areas – 4-in.
Scuff band: 10-in. high extruded                 ers; WABCO 2S/1M ABS, MGM brake                deep steel I-beams on 12-in. centers
   aluminum, full-length                         chambers; Sealco valves; Stemco             Suspension: Hendrickson HKANT 40
Crossmember: Front – 4-in. aluminum              Guardian wheel seals                           sliding air ride with 49-in. axle spacing;
   I-beam; bay area – 5-in. deep alumi-                                                         spindle axle; 16.5-in. x 7-in. drums with
   num I-beam; side area – 4-in. deep                                                           S-cam brakes; ArvinMeritor automatic
   steel I-beam; all on 12-in. centers                                                          slack adjusters; WABCO 2S/1M ABS;
Temperature control: Front – 3.5 in.;                                                           Binkley Lite slide spring suspension with
   doors – 3 in.; sides – 2 in.; roof – 2.9                                                     49-in. axle spacing; Sealco valves
   in.; floor – 2.5 in.; all urethane foam



                                                                                                         2008 OVERDRIVE SPEC GUIDE           101
Trailers
  HYUNDAI TRANSLEAD TRAILERS




      HT THERMOTECH                                    HT HY-CUBE                                         HT COMPOSITE
      Length: 53 ft.                                   Length: 53 ft.                                     Length: 53 ft.
      Width: 102.36 in.                                Width: 102.36 in.                                  Width: 102.36 in.
      Height: 13 ft. 6 in.                             Height: 13 ft. 6 in.                               Height: 13 ft. 6 in.
      Distributed load capacity: 65,000                Distributed load capacity: 65,000                  Distributed load capacity: 68,000
         GVWR                                             GVWR                                               GVWR
      Floor: Extruded aluminum 1.25-in. high           ABS: Two sensor, one modulator valve               Floor: Laminated Oak 1.375-in nominal
         duct type; rear gutter flush with top of         (2S/1M) system, PLC4Trucks                         thickness with three screws per
         floor; last 4 in. of floor reinforced for        compatible system                                  floorboard
         forklift use with extruded aluminum           Sidewall: 0.5-in. thick pre-painted white          ABS: Two sensor, one modulator valve
         inserts and a 43-in. deep x 96-in.               aluminum                                           (2S/1M) system, no diagnostics tool
         wide composite bearing sheet                  Roof: One piece, 0.40-in. thick, full-width        Sidewall: 0.25-in. composite panel with
      Sidewall: 0.40-in. pre-painted white                aluminum sheet, tension leveled prior to           pre-painted white, high tensile
         aluminum side sheet                              installation                                       galvanized steel
      Roof: One-piece, 0.032-in. thick aluminum        Rear frame: Hot-dipped 0.375-in. thick             Roof: One piece, 0.40-in. thick, full width
      Rear frame: Stainless steel rear frame;             galvanized steel construction with low             aluminum sheet, tension leveled prior
         hot-dipped galvanized high-tensile steel         profile header, tube shaped posts; forged          to installation
         bolt-on under-ride protection                    steel angle iron in top corners for added       Rear frame: Hot-dipped galvanized
      Crossmember: 4-in. deep extruded                    rack resistance; lights recessed in rear           high-tensile steel construction;
         aluminum I-beams on 12-in. centers               sill with heavy-duty protection bars               0.1875-in. thick with low profile
         from the end of the upper running             Crossmember: 4-in. deep, hot-rolled                   header; tube shaped posts; forged
         gear rails to support gear; 3-in. deep           steel I-beam; 80,000 psi yield strength,           steel angle irons in top corners for
         high-tensile aluminum I-beam on 12-in.           located on 12-in. centers; hat-shaped              added rack resistance; lights recessed
         centers between the upper coupler and            crossmember ahead of landing gear;                 in rear sill with heavy-duty protection
         support gear; 4-in. steel, 80,000-lb.            rear 4 ft. of trailer has corssmembers             bars
         yield I-beams on 12-in. centers over             located on 8-in. centers                        Crossmember: 4-in. deep, hot-rolled
         support gear and upper running gear           Suspension: Hutchens H9700 with                       steel I-beam; 80,000 psi yield strength,
         rails; two additional I-beams added in           H9811 Slider subframe with four                    located on 12-in. centers
         rear 4 ft. of trailer for impact resistance      locking pins                                    Suspension: Hendrickson air ride
      Suspension: Hutchens H9700 with                  Brakes: Non-asbestos lining 16.5-in. x             Brakes: Non-asbestos lining 16.5-in.
         H9711 slider assembly                            7-in. quick change type; “S” cam                   x 7-in. quick change type; “S” cam
      Lining: 0.50-in. Bulitex Hybrid sides,              operated automatic slack adjuster                  operated automatic slack adjuster
         0.65-in. Versitex front, 0.65-in. Versitex    Lining: 0.235-in. thick HDPE lining installed      Lining: Exterior grade 0.5-in. plywood
         rear doors; 0.65-in. Versitex ceiling            full height between uprights with no               installed full height over front wall; none
                                                          fasteners; side lining hooks into place for        on sidewalls
                                                          easy replacement; exterior grade 0.5-in.
                                                          plywood installed full height over front wall



102   OVERDRIVE SPEC GUIDE 2008
LIDDELL




ML60D LOWBED (SHOWN WITH
OPTIONAL 3-AXLE JEEP)

 Length: 93 ft. 5 in. (trailer only)
 Width: 8 ft. 6 in.
 Construction: T-1 steel flanges and main load carrying
    members; grade 50 webs
 Capacity: 60 tons in 16 ft.
 Deck length: 28 ft.
 Deck type: Drop-side rail
 Deck height: 16 in at siderail; 6-in. ground clearance
 Gooseneck: Hydraulic removable, non-ground bearing,
    126-in. swing clearance with flip box to accommodate
    a 3-axle jeep
 Suspension: Air ride with automatic and manual level
    control height adjustments 30,000 lbs.
 Axles: 5 in diameter, 25,000-lb. capacity each
 Bogie: 3-axle, 8-ft. 6-in. wide, 60-in. axle centers, with
    14-ft 1-in. spreader bar with nitrogen accumulator and
    fourth and fifth axles attached
 Tires: 255/70R x 22.5 low profile radials
 Wheels: 8.25-in. x 22.5-in. steel inside, aluminum out-
    side
 Outriggers: Heavy duty swinging side brackets each side
    of deck
 Brakes: 16.5-in x 7-in air with automatic slack adjusters
 Lashing rings: Heavy duty bent type
 Lights: 12-volt Truck-Lite sealed system; LEDs with dual
    strobes and battery backup, and on third and fifth axles




                                                               2008 OVERDRIVE SPEC GUIDE   103
Trailers

      MAC




                                                        ALUMINUM FLATBED                             DROPDECK PLATFORM
      HALF-ROUND                                        Length: 48 ft.; optional lengths available   Length: 48 ft.; optional lengths available
      ALUMINUM                                          Width: 102 in.; optional lengths available   Width: 102 in.; optional lengths available
      FRAMELESS DUMP                                    Weight: 8,604 lb.                            Fifth-wheel height: 48 in. nominal
                                                        Beam width: 48 in.                           Upper deck: 10-ft. width with 18-in.
      Load capacity: 48 yards                           Kingpin: 30 in.; optional 18 in., 24 in.,       kingpin location
      Dimensions: Length – 40 ft.; floor length            36 in., 42 in.                            Weight: 9,827 lb.
         – 36 ft., 7 in.; width – 102 in.; wall         Nose and neck style: Square front with       Load capacity: 60,000 lb. in 4 ft.
         height – 60 in.; rear pocket height               10-in. neck                               Nose and neck style: Full aluminum
         – 61.75 in.                                    Crossmember: Determined by application          – bolt-on
      Weight: 9,092 lb.                                 Suspension: Hendrickson Intraax AA-250;      Crossmember: 16-in. centers –
      Gate: 63.5-in. x 88.75 in. of 0.1875-in.             optional, Intraax AA-300                     determined by application
         steel operated by ball valve with overslung    Axle spacing: 122 in.; 49 in., 60 in., 72    Suspension: Hendrickson Intraax AA-250
         hinges                                            in. and 109 in. (optional)                Axle spacing: 122 in.
      Subframe: 102-in. wide closed tandem;             Lift axles: Hendrickson, Neway and           Wheels: 22.5-in. aluminum; optional
         optional, 122-in. spread tandem                   Ridewell (all optional)                      finishes
      Hoist: 8-5-265; optional, 9-5-265; HYVA           Wheels: 22.5-in. aluminum, 10-hole           Tires: Michelin
      Fenders: Optional aluminum                        Tires: Eight Michelin XZE 11R22.5 14-ply;    Brake drums: Centrifuse with aluminum
      Suspension: Hendrickson Intraax AA-250               optional 24.5-in. wide singles from          hubs
         TP; optional, Intraax AAA-300                     various manufacturers                     ABS: Four sensors, two modulators
      Suspension control valve: Ball valve              Brake drums: Centrifuse with aluminum        Tie-downs: Sliding tie-down with winch
      Axle spacing: 52 in.; optional, spread               hubs; cast iron with aluminum hubs,          track
         axles available                                   cast steel (optional)                     Floor: Aluminum, apitong nailers,
      Wheels: 22.5-in aluminum, 10-hole;                ABS: Four sensors, two modulators               additional options available
         optional finishes                              Tie-downs: Hollow rail with winch track;     Lighting: LED standard per DOT
      Tires: Eight Michelin XZE 11R22.5 14-ply;            optional, double tie-down track,          Landing gear: Holland Mark V
         optional, 24.5-in.-plus wide singles from         tie-downs in pairs                        Storage boxes: Aluminum, optional sizes
         various manufacturers                          Winches: Various sliding and fixed winch
      Brake drums: Centrifuse with aluminum                (between crossmembers) options
         hubs; optional cast iron with Duralite         Mudflaps: Behind tire on all four wheels;
         hubs, cast steel                                  at front of tires (optional)
      ABS: Four sensors, two modulators                 Lighting: Three panels, three lights on
      Pin-to-axle setting: 433 in.                         each; five marker lights on each side;
      Lighting: Three panels, three lights on each;        one pair mid-turn signals; two dock
         0.25-in. x 8-in. light on apron; five marker      bumpers; LED standard per DOT
         lights on each side; one pair mid-turn         Electrical: Optional auxiliary 4- or 7-way
         signals; one pair small rear pocket lights;       cable
         LED standard per DOT



104   OVERDRIVE SPEC GUIDE 2008
TRANSCRAFT



                                                                                                  D-EAGLE
DTL-2100 BEAVERTAIL                              EAGLE
                                                                                                  Length: 48 ft.
Length: 53 ft.                                   Length: 48 ft.                                   Width: 102 in.
Width: 102 in.                                   Width: 102 in.                                   Fifth wheel height: 48-in. nominal
Height: 42-in. rear plate                        Height: 54-in. rear plate                        Distributed load capacity: 80,000 lb.
Fifth wheel height: 48-in. nominal               Fifth wheel height: 48-in. nominal               Concentrated load capacity: 60,000 lb. in 10 ft.
Distributed load capacity: 80,000 lb.            Distributed load capacity: 80,000 lb.            Floor: 1.125-in. interlocking aluminum floor
   on lower deck                                 Concentrated load capacity: 70,000 lb. in           with four apitong nailers
Concentrated load capacity: 60,000 lb. in           10 ft.                                        Crossmember: 5-in. aluminum on lower deck,
   10 ft.                                        Floor: 1.125-in. interlocking aluminum              4-in. steel junior I-beams on upper deck
Floor: 1.125-in. shiplapped apitong                 floor with four apitong nailers               Upper deck: 10 ft. with 18-in. kingpin location
Crossmember: 4-in. steel junior I-beam,          Crossmember: 5-in. aluminum, 12-in.              Landing gear: Jost
   12-in. and 16-in. spacing                        spacing                                       Rub rail: 0.375 in. x 3 in., with recess for
Rub rail: 0.375 in. x 2.5 in., with recess       Rub rail: 0.375 in x 3 in., with recess for         reflective tape
   for reflective tape                              reflective tape                               Side rails: 6.5-in. aluminum
Side rails: 10-gauge steel fabricated            Side rails: 6.5-in. aluminum                     Pocket design: 1.625-in. x 3.5-in. x 4-in.
Pocket design: 1.625-in. x 3.5-in. x             Pocket design: 1.625-in. x 3.5-in. x 4-in.          x 0.3125-in. stake pockets; spacer bar
   3.5-in. x 0.25-in. stake pockets; double         x 0.3125-in. stake pockets; double pipe          between pockets
   pipe spacers between pockets                     spools between pockets                        Tie-downs: 15 pair recessed chain ties next
Tie-downs: 17 pair recessed chain ties           Tie-downs: 15 pair recessed chain ties              to side rail, sliding winch track with 12
   next to side rail, sliding winch track with      next to side rail, sliding winch track with      sliding winches and winch strap tie bar
   winch strap tie bar                              winch strap tie bar                           Axle: 5-in. round integral axle
Axle: Hendrickson integral axle                  Axle: Hendrickson integral axle                  Suspension: Intraax 230L Zero Maintenance,
Suspension: Hendrickson Intraax; air-ride        Suspension: Hendrickson Intraax; air-ride with      23,000-lb. suspension capacity with quick-
   with quick-align; 23,000-lb. suspension          quick-align; 23,000-lb. suspension capacity      align feature, Hendrickson Tiremaax tire
   capacity                                      Brake: Abex 30/30; 16-in. x 7-in.                   pressure system
Brake: Abex 30/30; 16-in. x 7-in.                   extended service brakes                       Brake: Extended service lining, 16 in. x 7 in.
   extended service brakes                       Brake drum: Meritor outboard cast drums          Brake drum: ConMet Centrifused
Brake drum: Meritor outboard cast drums          Auto-slack: Haldex                               Auto-slack: Haldex, 6-year warranty
Auto-slack: Haldex                               ABS: Meritor Wabco 4S/2M, four wheel             ABS: Meritor WABCO 4S/2M, four-wheel
ABS: Meritor WABCO 4S/2M, four wheel                sensing.                                         sensing
   sensing                                       Wheel ends: “P” spindle, 80/90 oil, Federal      Wheel ends: “P” spindle, 80/90 oil, Federal
Wheel ends: “P” spindle, 80/90 oil, Federal         Mogul seals, Meritor hub                         Mogul seals, Meritor hub
   Mogul seals, Meritor hub                      Electrical and lighting: Grote LEDs, five        Electrical and lighting: Grote LEDs, five per
Electrical and lighting: Grote LEDs, five           per side, nine on rear, wide arrow turn          side, nine on rear, wide arrow turn signals,
   per side, nine on rear, wide arrow turn          signals, double insulated in a sealed            double insulated in a sealed wire loom
   signals, double insulated in a sealed            wire loom by USA Harness                      Rear impact guard: 4-in. x 5-in. tubing
   wire loom by USA Harness                      Rear impact guard: 4-in. x 5-in. tubing             bumper and heavy-duty bracing; extra-
Ramps: Beavertail with level deck                   bumper and heavy-duty bracing; extra-            heavy duty rubber dock bumpers
   spring-assisted ramps                            heavy-duty rubber dock bumpers                Wheels: 22.5-in. aluminum



                                                                                                               2008 OVERDRIVE SPEC GUIDE             105
Trailers
      UTILITY




      3000R                                                                                             FLATBED 4000A
      REFRIGERATED VAN                                  4000 D-X DRY
                                                        FREIGHT VAN                                     Length: 48 ft.
                                                                                                        Width: 102.375 in.
      Length: 53 ft.
                                                        Length: 53 ft.                                  Fifth wheel height: 47 in.
      Width: 102.375 in.
      Height: 13 ft. 6 in.                              Width: 102.375 in.                              Floor: 1.125-in. extruded aluminum with
      Fifth wheel height: 46.5 in.                      Height: 13 ft. 6 in.                               four hardwood nail strips
      Distributed load capacity: 55,000 lb.             Fifth wheel height: 46.5 in.                    Crossmember: 3-in. steel I-beam on
      Floor: 1.375-in. heavy-duty extruded              Floor: 1.375-in. laminated hardwood                16-in. centerline
         aluminum duct; 16,000-lb. capacity             Crossmember: 4-in. steel I-beam on              Frame rating: 80,000 lb. evenly
      Crossmember: 5.5-in. aluminum                        12-in. centerline legs to tandem                distributed
         16,000-lb. I-beams, 12-in. centerline
                                                        Suspension: Hendrickson HKANT                   Suspension: Hendrickson AANT
         in bay
      Suspension: Hendrickson HKANT 40,000-                40,000-lb. Vantraax air-ride sliding            23,000-lb. with 121-in. spacing
         lb. Vantraax air-ride sliding tandem              tandem with Quik Draw pin release            Brakes: Outboard mounted cast iron
      Brakes: Outboard mounted cast iron                Brakes: Outboard mounted cast iron                 drums; 16.5-in. x 7-in. brakes; 2S-1M
         drums; 16.5-in. x 7-in. brakes; anti-lock         drums; 2S-1M SLH anti-lock brake                anti-lock brake system
         brake system; 10 stud hubs                        system                                       Tie-downs: 5.375-in. deep extruded
      Tie-downs: Horizontal log track and               Tie-downs: Log posts on 24-in.                     aluminum side rail with integral cinch
         Verta-Lock load control system, optional
                                                           centerline with “A” type slots on 8-in.         track; road side and curb side for
      Axle: Hendrickson LDA; N-spindle; Stemco
                                                           vertical centers                                sliding cinches; extruded aluminum
         Platinum Performance 5-year wheel end
         system                                         Axle: Hendrickson LDA; N-spindle;                  pipe spools 24-in. centerline between
      Electrical: Water-resistant, internally              Stemco Platinum Performance 5-year              pockets are 6,500-lb. load rated; meets
         grounded wiring harness, LEDs in top              wheel end system                                DOT requirement as anchor point for
         rail, and stop/turn/tail lights                Electrical: Water-resistant internally             chain binders
      Exterior: Pre-painted white 0.04-in.                 grounded wiring harness, LED stop/turn/      Axle: Hendrickson LDA; N-spindle;
         aluminum side skins                               tail lights                                     Stemco Platinum Performance 5-year
      Interior: Kemlite FRP interior lining, 0.06-
                                                        Interior/exterior: Pre-painted white 0.04-in.      wheel end system
         in. one-piece ceiling lining; tapered 0.06
         in., 100-in. one-piece side wall lining;          and 0.05-in. aluminum side skins,            Electrical: Water-resistant internally
         urethane foam insulation, 4-in. front             pre-painted white 0.019-in., 80,000-psi         grounded wiring harness, LED stop/tail/
         wall insulation; 2-in. side wall insulation,      galvanized steel lining, aluminum or FRP        turn lights
         3-in. roof and floor insulation                   roof skin
      Rear doors: Utility barrier-type                  Rear doors: 0.75-in. ply-metal rear
      Door frame: Brushed finish, stainless steel          doors, satin finish stainless steel rear
         rear door case
                                                           door case




106   OVERDRIVE SPEC GUIDE 2008
VANGUARD




VXP                                             VIP 4000                                     VIP MAXCUBE
Length: 53 ft.                                  Length: 53 ft.                               Length: 53 ft.
Width: 102.36 in.                               Width: 102.36 in.                            Width: 102.36 in.
Height: 13 ft. 6 in.                            Height: 13 ft. 6 in.                         Height: 13 ft. 6 in.
Weight: 14,000 lb., plus/minus 3 percent        Weight: 13,800 lb., plus/minus 3 percent     Weight: 14,300 lb., plus/minus 3 percent
Cubic capacity: 4,060 cu.-ft.                   Cubic capacity: 4,010 cu.-ft.                Cubic capacity: 4,050 cu.-ft.
Kingpin: Holland AAR approved and               Kingpin: Holland AAR approved and            Kingpin: Holland AAR approved and
   certified; 36-in. setting                       certified; 36-in. setting                    certified; 36-in. setting
Floor: 1.375-in. laminated oak;                 Floor: 1.375-in. laminated oak;              Floor: 1.375-in. laminated oak;
   pre-undercoated, three screws/board             pre-undercoated, three screws/board          pre-undercoated, three screws/board
Crossmember: 4-in. I-beams on 12-in.            Crossmember: 4-in. I-beams on 12-in.         Crossmember: 4-in. I-beams on 12-in.
   centers; wax-coated 80 KSI high-                centers; wax-coated 80,000 psi               centers; wax-coated 80,000 psi
   strength steel                                  minimum yield                                minimum yield
Threshold: One-piece, heavy-duty unitized       Threshold: One-piece, heavy-duty unitized    Threshold: One-piece, heavy-duty unitized
   forklift package galvanized                     forklift package galvanized                  forklift package galvanized
Suspension and subframe: Air-ride slide,        Suspension and subframe: Air-ride slide,     Suspension and subframe: Air-ride slide,
   216-in. rails                                   216-in. rails                                216-in. rails
Axles: 5-in round with extended service         Axles: 5-in round with extended service      Axles: 5-in round with extended service
   brake lining                                    brake lining                                 brake lining
Hubs: 10 stud hub piloted outboard mount        Hubs: 10 stud hub piloted outboard mount     Hubs: 10 stud hub piloted outboard mount
Wheels: Accuride 8.25-in. x 22.5-in. five       Wheels: 8.25-in. x 22.5-in. five hand hole   Wheels: Accuride 8.25-in. x 22.5-in. five
   hand hole disc; painted white                   disc; painted white                          hand hole disc; painted white
Tires: 295/75R22.5 radial                       Tires: 295/75R22.5 radial                    Tires: 295/75R22.5 radial
Anti-lock brakes: Meritor WABCO 2S-1M           Anti-lock brakes: Meritor WABCO 2S-1M        Anti-lock brakes: Meritor WABCO 2S-1M
Automatic slack adjusters: Bendix,              Automatic slack adjusters: Bendix,           Automatic slack adjusters: Bendix,
   Meritor, Haldex or Gunite                       Meritor, Haldex or Gunite                    Meritor, Haldex or Gunite
Landing gear: Holland 51,000 series with        Landing gear: Holland 51,000 series with     Landing gear: Holland 51,000 series with
   RCF, located 103 in. from kingpin               RCF, located 103 in. from kingpin            RCF, located 103 in. from kingpin
Side panels: 0.313-in. composite laminate       Side panels: 0.05-in. aluminum               Side panels: 0.05-in. aluminum
Roof sheet: 0.04-in. aluminum                      pre-painted white                            pre-painted white
Rear doors: Composite swing with                Roof sheet: 0.04-in. aluminum                Roof sheet: 0.04-in. aluminum
   structural anti-theft pin and collar         Rear doors: Plymetal swing with              Rear doors: Plymetal swing with
   fastners, 5 hinges and 1 lock rod per           structural anti-theft pin and collar         structural anti-theft pin and collar
   door                                            fastners, 5 hinges and 1 lock rod per        fastners, 5 hinges and 1 lock rod per
Front lining: 0.5-in. plywood full height,         door                                         door
   close out at bottom                          Front lining: 0.5-in. plywood full height,   Front lining: 0.5-in. plywood full height,
Scuff lining: Extruded aluminum base rail          close out at bottom                          close out at bottom
   with galvanized corrugated steel directly    Scuff lining: 12-in. corrugated steel        Scuff lining: 12-in. corrugated steel
   attached to sidewall for a total of 12-in.      directly attached to posts                   directly attached to posts
   side protection                              Side lining: .25-in. plywood recessed        Side lining: Snap-in high strength
                                                   between posts                                polypropylene



                                                                                                        2008 OVERDRIVE SPEC GUIDE         107
Trailers

      WABASH




      DURAPLATE DRY VAN                                                    ARCTICLITE REEFER
      Length: 53 ft.                                                       Length: 53 ft.
      Width: 102.375 in.; 101 in. interior, scuff to scuff
                                                                           Width: 102.375 in.
      Height: 13.5 ft.
      Suspension: Meritor RideSentry 40,000-lb. air-ride sliding tandem    Height: 13.5 ft.
      Axle, wheel end: Meritor WP axle with parallel spindle, pre-loaded   Suspension: Meritor RideSentry 40,000-lb. air-ride sliding tandem
         bearings and Q-Plus extended-wear brakes                          Axle, wheel end: Meritor WP axle with parallel spindle, pre-loaded
      ABS: Meritor WABCO 2S-1M                                                bearings and Q-Plus extended-wear brakes
      Nose: Six-post nose with heavy-duty extruded aluminum corner         ABS: Merior WABCO 2S-1M
         posts                                                             Interior liner: 0.50-in. Bulitex Hybrid thermoplastic liner with
      Sidewall: DuraPlate composite panels – constructed of
                                                                              extruded aluminum scuff; optional Bulitex liner with integral scuff
         high-density polyethylene core bonded between two sheets of
                                                                           Sidewalls: Heavy-duty, 1-in. Z-posts computer-contolled high-
         high-strength galvanized steel
      Roof: Bonded, tension roof with 0.04-in. aluminum sheet and steel;      pressure foam injection eliminates voids
         anti-snag roof bows                                               Roof: UV-resistant SolarGuard roof
      Rear frame coating: High-performance G2 powder coat                  Rear frame: Brushed stainless steel rear frame
      Rear doors: DuraPlate composite swing doors; optional overhead       Rear doors: Modular door design with inner and outer door seals;
         doors                                                                nylon hinge and lock rod bushings
      Floor: Full 1.375-in. laminated oak with 20,000-lb. rating           Floor: 1.375-in. extruded aluminum duct floor; outer aluminum floor
      Crossmember: 4-in. steel I-beams, 8-in. centers in the rear
                                                                              extrusion interlocks with scuff angle; corrosion-proof composite
         2 ft.; optional 8-in. centers in the rear 4 ft.
      Base rail: High-strength extruded aluminum with bolted base rail        stringers; single-piece thermoplastic sub-pan
         connections                                                       Crossmember: 5-in. aluminum I-beams on 12-in. centers in bay
      Lighting: LEDs upper front and rear marker; modular-sealed main         area; 4-in. steel I-beams on 8-in. centers over slider; 4-in. steel
         cable with Truck-Lite SureSeal plug-ins; all lights with return      I-beams on 8-in. centers in the rear 4 ft.
         ground                                                            Lighting: LEDs upper front and rear marker; modular-sealed main
                                                                              cable with Truck-Lite SureSeal plug-ins; all lights with return
                                                                              ground




108   OVERDRIVE SPEC GUIDE 2008

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:2
posted:12/25/2012
language:Unknown
pages:11