ORIGINAL RAPID TAP
Revision Date: 2007/08/10 Section 1: PRODUCT INFORMATION Chemical family: Chlorinated hydrocarbon. Product name: Original Rapid Tap Manufacturer: Relton Corporation 317 Rolyn Place Arcadia, CA 91007−2838. Manufacturer emergency phone Chemtrec 800−424−9300. number: Information phone number: 323−681−2551 Supplier: Bessey Tools North America 1165 Franklin Blvd, Unit G Cambridge, ON N1R 8E1. TDG classification: 1,1,1−TRICHLOROETHANE UN2831 CLASS 6.1 PG III.
WHMIS classification: B3, D1B.
DSL status: The substance(s) which appear in section 2 with CAS numbers appear on the Domestic Substances List. Supplier MSDS date: 2005/07/22 Section 2: HAZARDOUS INGREDIENTS
C.A.S. 646−06−0 CONCENTRATION % 2000 MG/KG RAT DERMAL 4893 MG/KG RABBIT ORAL 48,500 MG/M3/4H RAT INHALATION LC/50 20,650 MG/M3/4H RAT INHALATION 10,500 MG/M3/2H MOUSE INHALATION
RT − ORIGINAL RAPID TAP
1/5
TRACE <10
PERFUME OILS TRADE SECRET COMPONENT
NOT AVAILABLE NOT AVAILABLE
NOT AVAILABLE NOT AVAILABLE
NOT AVAILABLE NOT AVAILABLE
Section 3: PHYSICAL DATA Physical state: Liquid. Appearance & odor: Clear amber liquid. Cinnamon odor. Odor threshold (ppm): Not available. Vapour pressure (mmHg): 100 Vapour density (air=1): 4.6 Volatiles (%) By volume: Not available. Evaporation rate (1,1,1−trichloroethane = 1). (butyl acetate = 1): 1.3 Boiling point (°C): 72 Freezing point (°C): Not available. pH: Not available. Specific gravity @ 20 °C: (water = 1). 1.17 @ 25C Solubility in water (%): Slight. Coefficient of water\oil dist.: Not available. VOC: 29.2 Section 4: FIRE & EXPLOSION DATA Flammability: Combustible. Conditions of flammability: Heat, sparks and open flames. Extinguishing media: Water fog. Special procedures: Firefighters should wear adequate protective gear. Wear a self contained breathing apparatus. Auto−ignition temperature: Not available. Flash point (°C), method: Cleveland Open Cup. 72.2 Lower flammability 8. limit (% vol): Upper flammability 10.5 limit (% vol): Explosion Data Sensitivity to static discharge: Not available. Sensitivity to mechanical impact: Not available.
RT − ORIGINAL RAPID TAP
2/5
Hazardous combustion products: Oxides of carbon (CO, CO2). Phosgene. Hydrogen chloride (HCl). Explosive power: Not available. Section 5: REACTIVITY DATA Chemical stability: Stable under normal conditions. Conditions of instability: High temperatures. Open flames. Welding arc. Hazardous polymerization: Will not occur. Incompatible substances: Water Aluminum (Al). Strong alkalies. Caustic soda. Hazardous decomposition See hazardous combustion products. products: Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Inhalation, skin and eye contact. Effects of acute exposure Eye contact: May cause corneal damage. May cause a temporary irritation. Skin contact: Slight irritant. Drying and defatting of skin. Inhalation: May have narcotic effects. May cause unconsciousness and even death. May cause incoordination. May cause dizziness or drunkenness effects. May cause an irregular heartbeat. Ingestion: May cause nausea, vomiting and diarrhea. May cause liver damage. Aspiration of material into lungs may cause chemical pneumonitis. May cause fatigue. Effects of chronic exposure: See effects of acute exposure. LD50 of product, species & route: 15,000 mg/kg rabbit dermal. 7,950 − 15,800 mg/kg rat oral. LC50 of product, species & route: Not available for mixture, see the ingredients section. Exposure limit of material: Not available for mixture, see the ingredients section. Sensitization to product: Not available. Carcinogenic effects: Not listed as a carcinogen. Reproductive effects: None known. Teratogenicity: Not available.
RT − ORIGINAL RAPID TAP
3/5
Mutagenicity: Not available. Synergistic materials: Not available. Section 7: PREVENTATIVE MEASURES Precautionary Measures Gloves/Type: None required with normal use. Respiratory/Type: If ventilation is inadequate.
Wear a NIOSH approved respirator. Eye/Type:
Safety goggles. Footwear/Type: Safety shoes per local regulations. Clothing/Type: Wear adequate protective clothes. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: General mechanical ventilation. Leak/Spill: Contain the spill. Absorb with inert material. Evacuate all non−essential personnel. Prevent entry into drains, sewers, and other waterways. Wear appropriate protective equipment. Place in appropriate container. Waste disposal: Dispose in accordance with local, provincial/state, and federal regulations. Handling procedures and Avoid breathing vapors/mists. equipment: Use adequate ventilation. Wash thoroughly after using, particularly before eating or smoking. Wear personal protective equipment appropriate to task. Wash clothing before re−use. Avoid contact with skin, eyes and clothing. Do not cut, grind, weld or drill on or near containers. Storage requirements: Keep away from heat, sparks, and open flames. Store in a cool and dry place. TDG classification: 1,1,1−TRICHLOROETHANE UN2831 CLASS 6.1 PG III.
Special shipping information: See transportation information.
RT − ORIGINAL RAPID TAP
4/5
Section 8: FIRST AID MEASURES Skin contact: Remove contaminated clothing. Wash thoroughly with soap and water. Seek medical attention if irritation persists. Eye contact: Flush with water for at least 15 minutes. Obtain emergency medical attention. Inhalation: Remove victim to fresh air. If irritation occurs, consult a physician. Ingestion: Do not induce vomiting, seek medical attention. Do not administer epinephrine or adrenaline. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety.
This MSDS was generated by Conform−Plus Application Service. Visit us at www.netmsds.com.
RT − ORIGINAL RAPID TAP
5/5