1284

Document Sample
1284 Powered By Docstoc
					Page 1 of 11

@

Beckman Coulter
TM

Kit MSDS
Doc. ID: 442772-75: Rev. AB

Product Information
Product Name Part Number Series Name:

Fe/IBCT Calibrator Kit
442772 SYNCHRON Systems

Doc. ID 442772-75 AB Issued (year/month/day) Revised (year/month/day) 2002/07/19

Components
Description Fe/IBCT Calibrator 1 Fe/IBCT Calibrator 2

Transport Information
Shipping Name ICAO UN/ID Number IATA Packing Group IATA Corrosive liquid, acidic, inorganic, n.o.s. (contains Hydrochloric acid) 3264 III Hazard Class Subsidiary Risk Special Provisions IMDG Hazard Class Subsidiary Risk Special Provisions Marine Pollutant US DOT Hazard Class Subsidiary Risk Special Provisions European ADR ADR Classification Subsidiary Risk Item Number and Letter Canadian TDG PIN TDG Classification Subsidiary Risk Special Provisions 8 Corrosives None A3 8 Corrosive substances None 223, 274, 944 No 8 Corrosive material None Not applicable 8.A Acid substances None 17 (c) 3264 8 Corrosives None 16

2002 Beckman Coulter, Inc.
Global MSDS – English

Page 2 of 11

@

Beckman Coulter
TM

MATERIAL SAFETY DATA SHEET
Section 1 Company and Product Identification

Product Name Part Number Series Name Manufacturer Distributor and Emergency Phone No.

Fe/IBCT Calibrator 1
Component of P/N 442772 SYNCHRON Systems

Fe/IBCT Calibrator Kit Doc. ID 442772-75 AB Issued (year/month/day) Revised (year/month/day) 2002/07/19

Beckman Coulter, Inc., Fullerton, CA 92834-3100, U.S.A.

¤

Refer to attached list, Document ID: 472050, for local distributor and emergency phone numbers.

Section 2 Composition and Information on Ingredients
Hazardous Ingredients: Chemical Name Hydrochloric Acid CAS # 7647-01-0 % by wt. <0.5% No Meets Hazardous Criteria: EU US OSHA Yes WHMIS Exempt

See Section 15 Regulatory Information for additional information on hazard classifications.

Section 3 Hazards Identification
Emergency Overview Colorless; Clear; Liquid; Odorless Nonflammable aqueous solution. Corrosive; eye, skin burns, severe respiratory tract irritant. Physical Hazards Potential Health Effects Summary Product Hazard Classifications Beckman Coulter Safety Rating No physical hazards were determined from a review of available literature. Exposure may cause irritation or burns to respiratory tract, skin, and eyes. Corrosive effects may be delayed. See Section 11 Toxicological Information for more detailed health information. EU: Not applicable WHMIS: Exempt Code 0=none 1=slight 2=caution 3=severe US OSHA: Hazardous

Flammability (Section V): 0 Health (Section XI): 2 Reactivity with Water (Section X): 1 Contact (Section VIII): 2

Section 4 First Aid Measures
Inhalation Eye Contact If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately and obtain medical attention. If product enters eyes, wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open. If pain or irritation occur, obtain medical attention.

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 1

Doc. ID: 442772-75 AB

Page 3 of 11

Section 4 First Aid Measures (Continued)
Skin Contact Ingestion In case of skin contact, flush with copious amounts of water for at least 15 minutes. If pain or irritation occur, obtain medical attention. If ingested, wash mouth out with water. If irritation or discomfort occurs, seek medical attention.

Section 5 Fire Fighting Measures
Flash Point Flammable Limits Autoignition Temp. Extinguishing Media Special Fire and Explosion Hazards Hazardous Combustion Products Protective Equipment for Firefighters Not applicable Not applicable Not applicable Use extinguishing media suitable for surrounding fire. No special hazards determined. Due to the composition and volume of this product, combustion products generated from it are not expected to present a significant hazard. Self-contained breathing apparatus is recommended for firefighters.

Section 6 Accidental Release Measures
Personal Precautions Spill and Leak Procedures Environmental Precautions Avoid skin contact. Use good laboratory procedures. Wipe up material carefully and place in container suitable for disposal. Contain spill to prevent migration.

Section 7 Handling and Storage
Handling Precautions Recommended Storage Conditions Avoid inhaling, ingesting, and contact with eyes and skin. Keep away from incompatible material. To maintain efficacy, store according to the instructions in the product labeling.

Section 8 Exposure Controls and Personal Protection
Exposure Limits US OSHA: Hydrochloric Acid ACGIH: Hydrochloric Acid DFG MAK: Hydrochloric Acid Engineering Controls 5 ppm MAK; 7.6 mg/m3 MAK; 2 x normal MAK (5 min momentary value); don’t exceed 8 times during shift Use in well ventilated area. C 5 ppm; C 7.5 mg/m3 C 5 ppm; C 7 mg/m3

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 1

Doc. ID: 442772-75 AB

Page 4 of 11

Section 8 Exposure Controls and Personal Protection (Continued)
Respiratory Protection Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional. Safety glasses or chemical goggles should be worn to prevent eye contact. Impervious gloves should be worn to prevent skin contact.

Eye Protection Skin Protection

Section 9 Physical and Chemical Properties
Physical State Color Transparency Odor Odor Threshold pH Boiling Point Melting Point Specific Gravity Vapor Pressure Vapor Density Evaporation Rate Solubility Water Organic Miscible Not applicable Liquid Colorless Clear Odorless Hydrochloric Acid no geometric mean air odor threshold 1.5 Not available Not available 1 @20°C Not available Not available Not available

Section 10 Stability and Reactivity
Stability Hazardous Incompatibilities Stable under normal temperatures and pressures. Strong oxidizers Perchloric Acid Strong bases Permanganates When stored as labeled, no known hazardous decomposition products are formed during the shelf-life of this product. Keep away from incompatible material.

Hazardous Decomposition Products Conditions to Avoid

Section 11 Toxicological Information
Toxicity Data for Hazardous Ingredients Hydrochloric Acid Inhalation LC50 Rat : 3124 ppm/1H; Inhalation LC50 Mouse : 1108 ppm/1H

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 1

Doc. ID: 442772-75 AB

Page 5 of 11

Section 11 Toxicological Information (Continued)
Primary Routes of Exposure Potential Effects of Acute Exposure The most likely routes of exposure are skin, eye contact and inhalation. Inhalation of dilute acidic mists may cause respiratory tract irritation or burns to mucous membranes resulting in coughing, choking and difficulty in breathing. Results of skin contact may range from irritation and inflammation to burns with blistering. Eye contact may cause severe irritation with painful, watery eyes or burns with possible blindness. Ingestion may cause irritation or burns to the mouth and throat resulting in pain, difficulty in speaking and swallowing, intense thirst, nausea and vomiting. Depending upon concentration and duration of exposure to dilute acidic mist, effects may be similar to those described for acute exposure. Repeated or prolonged contact with dilute acid may result in dermatitis and conjunctivitis with inflamed skin and eyes. Symptoms may include redness and itching or burning of the skin and eyes, and irritation or burning sensation of the upper respiratory tract with coughing and difficulty in breathing. No ingredients in this product are listed as carcinogens by ACGIH, IARC, NTP, OSHA or 67/548/EEC Annex I. Reproductive effects have been reported in animal studies. Individuals with eye, skin or kidney disorders may find these conditions aggravated by exposure to this product.

Potential Effects of Chronic Exposure Symptoms of Overexposure Carcinogenicity Other Effects Conditions Aggravated by Exposure

Section 12 Ecological Information
Ecotoxicity Biodegradability Mobility Toxic to fish and other water organisms. No information available. No information available.

Section 13 Disposal Considerations
Waste Disposal Dispose of waste product, unused product and contaminated packaging in compliance with federal, state and local regulations. If unsure of the applicable requirements, contact the authorities for information.

Section 14 Transport Information
International Shipping Information Shipping Name ICAO UN/ID Number IATA Packing Group IATA Hazard Class Subsidiary Risk Special Provisions IMDG Hazard Class Subsidiary Risk Special Provisions Marine Pollutant Corrosive liquid, acidic, inorganic, n.o.s. (contains Hydrochloric acid) 3264 III 8 Corrosives None A3 8 Corrosive substances None 223, 274, 944 No

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 1

Doc. ID: 442772-75 AB

Page 6 of 11

Section 14 Transport Information (Continued)
US DOT Hazard Class Subsidiary Risk Special Provisions European ADR ADR Classification Subsidiary Risk Item Number and Letter Canadian TDG PIN TDG Classification Subsidiary Risk Special Provisions 8 Corrosive material None Not applicable 8.AAcid substances None 17 (c) 3264 8 Corrosives None 16

Section 15 Regulatory Information
US Federal and State Regulations SARA 313 CERCLA RG’s, 40 CFR 302.4 California Proposition 65 Massachusetts MSL New Jersey Dept. of Health RTK List Pennsylvania RTK EU Labeling Classification Preparation not classified. Canada This product is exempt from WHMIS label and MSDS requirements. PIN: Ingredients on Ingredient Disclosure List: Ingredients with unknown toxicological properties: 3264 Hydrochloric Acid Product is exempt Hydrochloric Acid is subject to reporting requirements of Section 313, Title III of SARA. Hydrochloric Acid is listed. No ingredients listed Hydrochloric Acid is listed. Hydrochloric Acid is listed. Hydrochloric Acid is listed.

Section 16 Other Information
For further information, please contact your local Beckman Coulter representative.
WHILE BECKMAN COULTER, INC. BELIEVES THE INFORMATION CONTAINED HEREIN IS VALID AND ACCURATE, BECKMAN COULTER MAKES NO WARRANTY OR REPRESENTATION AS TO ITS VALIDITY, ACCURACY, OR CURRENCY. BECKMAN COULTER SHALL NOT BE LIABLE OR OTHERWISE RESPONSIBLE IN ANY WAY FOR USE OF EITHER THIS INFORMATION OR MATERIALS TO WHICH IT APPLIES. DISPOSAL OF HAZARDOUS MATERIALS MAY BE SUBJECT TO LOCAL LAWS OR REGULATIONS. Printed in U.S.A.

Page 7 of 11

@

Beckman Coulter
TM

MATERIAL SAFETY DATA SHEET
Section 1 Company and Product Identification

Product Name Part Number Series Name Manufacturer Distributor and Emergency Phone No.

Fe/IBCT Calibrator 2
Component of P/N 442772 SYNCHRON Systems

Fe/IBCT Calibrator Kit Doc. ID 442772-75 AB Issued (year/month/day) Revised (year/month/day) 2002/07/19

Beckman Coulter, Inc., Fullerton, CA 92834-3100, U.S.A.

¤

Refer to attached list, Document ID: 472050, for local distributor and emergency phone numbers.

Section 2 Composition and Information on Ingredients
Hazardous Ingredients: Chemical Name Hydrochloric Acid CAS # 7647-01-0 % by wt. <0.5% No Meets Hazardous Criteria: EU US OSHA Yes WHMIS Exempt

See Section 15 Regulatory Information for additional information on hazard classifications.

Section 3 Hazards Identification
Emergency Overview Colorless; Clear; Liquid; Odorless Nonflammable aqueous solution. Corrosive; eye, skin burns, severe respiratory tract irritant. Physical Hazards Potential Health Effects Summary Product Hazard Classifications Beckman Coulter Safety Rating No physical hazards were determined from a review of available literature. Exposure may cause irritation or burns to respiratory tract, skin, and eyes. Corrosive effects may be delayed. See Section 11 Toxicological Information for more detailed health information. EU: Not applicable WHMIS: Exempt Code 0=none 1=slight 2=caution 3=severe US OSHA: Hazardous

Flammability (Section V): 0 Health (Section XI): 2 Reactivity with Water (Section X): 1 Contact (Section VIII): 2

Section 4 First Aid Measures
Inhalation Eye Contact If product is inhaled, move exposed individual to fresh air. If individual is not breathing, begin artificial respiration immediately and obtain medical attention. If product enters eyes, wash eyes gently under running water for 15 minutes or longer, making sure that the eyelids are held open. If pain or irritation occur, obtain medical attention.

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 2

Doc. ID: 442772-75 AB

Page 8 of 11

Section 4 First Aid Measures (Continued)
Skin Contact Ingestion In case of skin contact, flush with copious amounts of water for at least 15 minutes. If pain or irritation occur, obtain medical attention. If ingested, wash mouth out with water. If irritation or discomfort occurs, seek medical attention.

Section 5 Fire Fighting Measures
Flash Point Flammable Limits Autoignition Temp. Extinguishing Media Special Fire and Explosion Hazards Hazardous Combustion Products Protective Equipment for Firefighters Not applicable Not applicable Not applicable Use extinguishing media suitable for surrounding fire. No special hazards determined. Due to the composition and volume of this product, combustion products generated from it are not expected to present a significant hazard. Self-contained breathing apparatus is recommended for firefighters.

Section 6 Accidental Release Measures
Personal Precautions Spill and Leak Procedures Environmental Precautions Avoid skin contact. Use good laboratory procedures. Wipe up material carefully and place in container suitable for disposal. Contain spill to prevent migration.

Section 7 Handling and Storage
Handling Precautions Recommended Storage Conditions Avoid inhaling, ingesting, and contact with eyes and skin. Keep away from incompatible material. To maintain efficacy, store according to the instructions in the product labeling.

Section 8 Exposure Controls and Personal Protection
Exposure Limits US OSHA: Hydrochloric Acid ACGIH: Hydrochloric Acid DFG MAK: Hydrochloric Acid Engineering Controls 5 ppm MAK; 7.6 mg/m3 MAK; 2 x normal MAK (5 min momentary value); don’t exceed 8 times during shift Use in well ventilated area. C 5 ppm; C 7.5 mg/m3 C 5 ppm; C 7 mg/m3

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 2

Doc. ID: 442772-75 AB

Page 9 of 11

Section 8 Exposure Controls and Personal Protection (Continued)
Respiratory Protection Under normal conditions, the use of this product should not require respiratory protection. If overexposure should occur and ventilation is not adequate to maintain airborne concentrations at acceptable levels, the use of respiratory protection should be evaluated by a qualified professional. Safety glasses or chemical goggles should be worn to prevent eye contact. Impervious gloves should be worn to prevent skin contact.

Eye Protection Skin Protection

Section 9 Physical and Chemical Properties
Physical State Color Transparency Odor Odor Threshold pH Boiling Point Melting Point Specific Gravity Vapor Pressure Vapor Density Evaporation Rate Solubility Water Organic Miscible Not available Liquid Colorless Clear Odorless Hydrochloric Acid no geometric mean air odor threshold 1.5 Not available Not available 1 @20°C Not available Not available Not available

Section 10 Stability and Reactivity
Stability Hazardous Incompatibilities Stable under normal temperatures and pressures. Strong oxidizers Perchloric Acid Strong bases Permanganates When stored as labeled, no known hazardous decomposition products are formed during the shelf-life of this product. Keep away from incompatible material.

Hazardous Decomposition Products Conditions to Avoid

Section 11 Toxicological Information
Toxicity Data for Hazardous Ingredients Hydrochloric Acid Inhalation LC50 Rat : 3124 ppm/1H; Inhalation LC50 Mouse : 1108 ppm/1H

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 2

Doc. ID: 442772-75 AB

Page 10 of 11

Section 11 Toxicological Information (Continued)
Primary Routes of Exposure Potential Effects of Acute Exposure The most likely routes of exposure are skin, eye contact and inhalation. Inhalation of dilute acidic mists may cause respiratory tract irritation or burns to mucous membranes resulting in coughing, choking and difficulty in breathing. Results of skin contact may range from irritation and inflammation to burns with blistering. Eye contact may cause severe irritation with painful, watery eyes or burns with possible blindness. Ingestion may cause irritation or burns to the mouth and throat resulting in pain, difficulty in speaking and swallowing, intense thirst, nausea and vomiting. Depending upon concentration and duration of exposure to dilute acidic mist, effects may be similar to those described for acute exposure. Repeated or prolonged contact with dilute acid may result in dermatitis and conjunctivitis with inflamed skin and eyes. Symptoms may include redness and itching or burning of the skin and eyes, and irritation or burning sensation of the upper respiratory tract with coughing and difficulty in breathing. No ingredients in this product are listed as carcinogens by ACGIH, IARC, NTP, OSHA or 67/548/EEC Annex I. Reproductive effects have been reported in animal studies. Individuals with eye, skin or kidney disorders may find these conditions aggravated by exposure to this product.

Potential Effects of Chronic Exposure Symptoms of Overexposure Carcinogenicity Other Effects Conditions Aggravated by Exposure

Section 12 Ecological Information
Ecotoxicity Biodegradability Mobility Toxic to fish and other water organisms. No information available. No information available.

Section 13 Disposal Considerations
Waste Disposal Dispose of waste product, unused product and contaminated packaging in compliance with federal, state and local regulations. If unsure of the applicable requirements, contact the authorities for information.

Section 14 Transport Information
International Shipping Information Shipping Name ICAO UN/ID Number IATA Packing Group IATA Hazard Class Subsidiary Risk Special Provisions IMDG Hazard Class Subsidiary Risk Special Provisions Marine Pollutant Corrosive liquid, acidic, inorganic, n.o.s. (contains Hydrochloric acid) 3264 III 8 Corrosives None A3 8 Corrosive substances None 223, 274, 944 No

Fe/IBCT Calibrator Kit Fe/IBCT Calibrator 2

Doc. ID: 442772-75 AB

Page 11 of 11

Section 14 Transport Information (Continued)
US DOT Hazard Class Subsidiary Risk Special Provisions European ADR ADR Classification Subsidiary Risk Item Number and Letter Canadian TDG PIN TDG Classification Subsidiary Risk Special Provisions 8 Corrosive material None Not applicable 8.AAcid substances None 17 (c) 3264 8 Corrosives None 16

Section 15 Regulatory Information
US Federal and State Regulations SARA 313 CERCLA RG’s, 40 CFR 302.4 California Proposition 65 Massachusetts MSL New Jersey Dept. of Health RTK List Pennsylvania RTK Hydrochloric Acid is subject to reporting requirements of Section 313, Title III of SARA. Hydrochloric Acid is listed. Ferric Chloride is listed. No ingredients listed Hydrochloric Acid is listed. Ferric Chloride is listed. Hydrochloric Acid is listed. Ferric Chloride is listed. Hydrochloric Acid is listed. Ferric Chloride is listed.

EU Labeling Classification Preparation not classified. Canada This product is exempt from WHMIS label and MSDS requirements. PIN: Ingredients on Ingredient Disclosure List: Ingredients with unknown toxicological properties: 3264 Hydrochloric Acid Product is exempt

Section 16 Other Information
For further information, please contact your local Beckman Coulter representative.
WHILE BECKMAN COULTER, INC. BELIEVES THE INFORMATION CONTAINED HEREIN IS VALID AND ACCURATE, BECKMAN COULTER MAKES NO WARRANTY OR REPRESENTATION AS TO ITS VALIDITY, ACCURACY, OR CURRENCY. BECKMAN COULTER SHALL NOT BE LIABLE OR OTHERWISE RESPONSIBLE IN ANY WAY FOR USE OF EITHER THIS INFORMATION OR MATERIALS TO WHICH IT APPLIES. DISPOSAL OF HAZARDOUS MATERIALS MAY BE SUBJECT TO LOCAL LAWS OR REGULATIONS. Printed in U.S.A.


				
DOCUMENT INFO