Toy Radio Helicopter Instructions
1 Go to a local park, open soccer area or other large grass area. Locate an area without trees,
structures or other objects that may obstruct your helicopter's flight.
2 Place a brand new group of the right batteries in to the radio controller, after which energy
around the toy radio helicopter while using "On/Off" switch.
3 Contain the toy helicopter inside your hands, firmly gripping it from the bottom of the helicopter
body. Test the helicopter rotor blades and then any other moving parts by pressing the remote
control's directional stays in each and every direction.
4 Put the toy radio helicopter on an amount grass area. Make use of the accelerator stick in your
handheld remote control to progressively boost the speed from the rotor blades before the
helicopter is hanging 3 to 4 ft over the ground. Make use of the directional controls to rotate the
helicopter on the horizontal axis and also to move it both forward and backward. Keep your
helicopter within 30 ft individuals to prevent losing radio reception.
5 Land the toy helicopter by gradually lowering pressure around the accelerator control. Permit
the radio-controlled helicopter to progressively descend until it's back around the grass. Adjust the
rotor blades and tail rotors when the helicopter tilts while flying or if it's hard to control.
Would you like to have more article about the RC helicopter ?Visit aurabuy.com.