Docstoc

TECHNICAL DATA SHEETS SURFACE PROTECTION

Document Sample
TECHNICAL DATA SHEETS SURFACE PROTECTION Powered By Docstoc
					TECHNICAL DATA SHEETS – SURFACE PROTECTION
                                                                                                    75%
                                                                                                    40%




                                                     SICOROL HO – SURFACE PROTECTION                                                                                         V1



PRODUCT DESCRIPTION
SICOROL HO is a solvent-free, oil-repellent, polymeric concrete impregnation. Concrete products affected by environmental influen-
ces can be increased in resistance with the application of SICOROL HO. Liquids, especially oil, remain on the sealant’s surface and
does not penetrate into the concrete and such liquids can be removed with suitable materials (cellulose, sand, etc). SICOROL HO
does neither create a glossy nor a colour intensifying effect.




FIELDS OF APPLICATION
SICOROL HO is especially designed for application on concrete surfaces such as for paver blocks, kerbstones and fair-faced concre-
te. It is particularly suitable for hardened and absorbent grounds. By using SICOROL HO both, new and older concrete products can
be protected sustainably against soiling. Suitable for use with grinded an polished materials when cleared in adequate trials.



TECHNICAL PROPERTIES
‣ Colour: yellowish
‣ Form: liquid
‣ Density: 1.0 g/cm³



INSTRUCTIONS FOR USE
SICOROL HO is supplied ready-for-use and is to be applied evenly by brush or suitable spraying device. In each case, puddles are to
be avoided during treatment! Dirt, dust, moss/algae and all foreign paint substances have to be removed completely from the surface
before application. For this procedure, we recommend SICOROL ZE, our highly active stone cleaner, based on fast acting, biodegra-
dable organic acid. Before SICOROL HO is applied, the substrate should only be matt-moist at maximum. Drying time is approx. 20
minutes at 20°C. The concrete is accessible and ready for stacking after approx. 24 hrs.



RECOMMENDATION
‣ Before using high-pressure hose for cleaning purposes, it is essential to test its ef-fect on the product on a remote spot.
‣ Protection against intense sunlight during and three hours after processing is ab-solutely necessary.
‣ Test its effect at a remote place before initial application.



CONSUMPTION
Approx. 100 – 300 ml/m2 (Depending on substrate).



PACKAGING AND DIMENSIONS
10l container, 25l container, 180l drum, 1,000l cask.



STORAGE AND SHELF LIFE
Protect from frost, intense sunlight and dirt. In closed original container stable 12 months from manufacturing date. Close container
well after use.



SAFETY
For further information, please refer to the EG Safety Data Sheet.




This technical data sheet is a translation from German and does not consider local bulding codes or legal requirements. It shall be used as a general reference for the product.
Legally binding is only the German technical data. FABRINO GmbH & Co. KG I +49 (0) 8331 92506-0 I info@fabrino.eu I www.fabrino.eu
                                                                                                    75%
                                                                                                    40%




                                                     SICOROL PREMIUM – SURFACE PROTECTION                                                                                    V1



PRODUCT DESCRIPTION
SICOROL PREMIUM is a hydro- and oleo-phoborizing, soil resisting and solvent-based concrete impregnation based on
nanotechnology.



BENEFITS
SICOROL PREMIUM has numerous advantages without changing the characteristic of the treated surfaces. The product:
‣ Is UV-resistant and permeable for water vapour.
‣ Protects the surface from watery and oily soiling, so that it does not penetrate the surface and can be easily removed with our
  cleaner SICOROL ZE.
‣ Reduces water runs on facades.
‣ Reduces growth of algae, moss and micro-organisms.
‣ Reduces efflorescence and frost-thaw damages, etc..



FIELDS OF APPLICATION
SICOROL PREMIUM is suitable for treatment of (absorbent) mineral-based surfaces such as:
‣ Concretes with various surface treatments, such as: Washed, acidified, abrasive blasted, processed to a rough finish etc.,
‣ Mineral grout, clinker and brick,
‣ Sandstone, calcareous sandstone, Granite
SICOROL PREMIUM protects especially pavement, slabs and facades from watery and oily soiling. It is possible to protect older as
well as cured concrete surfaces long-term.



TECHNICAL PROPERTIES
‣ Fluid with mild odour
‣ Density: ca. 0.8 g/cm³
‣ pH value: ca. 8.0
‣ Viscosity: ca. 2 mm2/s



INSTRUCTIONS FOR USE
PREPARING THE SURFACE: Before application of SICOROL PREMIUM, the surface to be treated must be cleaned to remove soi-
ling, efflorescence, growth of algae and moss, possible residual stripping agent, etc. To remove residual stripping agent, you should
use our OIL STAIN REMOVER SR 10, or our cleaner SICOROL ZE. After cleaning, water absorbed by the surface must completely
dry off.
WEATHER CONDITIONS: Application should be carried out during dry, preferably windless weather and at temperatures of air and
surface between at least +5°C and maximally +40°C. During and at least six hours after treatment, protect surface from rain and in-
tense sunlight. In the supplied concentration, SICOROL PREMIUM is best applied to the dry and clean surface to be treated evenly to
achieve a uniform wetting with a brush, roller or with a low-pressure spray device (ensuring however formation of an aerosol screen).
For highly absorbent surfaces we recommend a second coating wet-in-wet in order to achieve the optimal protective effect.Tools are
to be cleaned before the solution dries up with clear water. For the current cleaning of the impregnated surface, please consider our
separate maintenance instruction.



CONSUMPTION
Between 100 and 300 ml/m², depending on the absorption of the surface. Using a test surface is recommended!



PACKAGING AND DIMENSIONS
25l container, 180l drum, 1,000l cask.



STORAGE AND SHELF LIFE
Store in a cool and dry place. Protect from direct sunlight. In closed original container stable 12 months from manufacturing date.
Close container well after use.



SAFETY
For further information, please refer to the EG Safety Data Sheet.




This technical data sheet is a translation from German and does not consider local bulding codes or legal requirements. It shall be used as a general reference for the product.
Legally binding is only the German technical data. FABRINO GmbH & Co. KG I +49 (0) 8331 92506-0 I info@fabrino.eu I www.fabrino.eu
                                                                                                    75%
                                                                                                    40%




                                                     SICOROL W – SURFACE PROTECTION                                                                                          V1



PRODUCT DESCRIPTION
SICOROL W is a concrete sealant on polymer base. The resistance of concrete pro-ducts against environmental influences can be
increased significantly by applying SICOROL W. Liquids can hardly penetrate into treated material. SICOROL W creates a silky lustre
wet effect on the treated surface.



FIELDS OF APPLICATION
SICOROL W is especially designed for application on concrete products such as paving stones, kerbs and exposed concrete sur-
faces. It is particularly suitable for setted and absorbent grounds. By using SICOROL W, both new concrete products as elder ones
can be protected sustainably against wheahter influence.



TECHNICAL PROPERTIES
‣ Colour: milky
‣ Consistency: liquid
‣ Density: 1.0 g/cm³



INSTRUCTIONS FOR USE
SICOROL W is delivered ready for use and is to be applied regularly by brush or suit-able pneumatic atomizer. In every case puddles
must be avoided during processing time! Dirt, dust, moss/alga and all foreign paintings have to be removed completely from the
ground before application. For this procedure we recommend SICOROL ZE, our highly active stone cleanser, based on a fast biode-
gradable organic acid. Be-fore SICOROL W is applied the ground should only low moist. Intense insolation as well as rain must be
avoided during and also 3 hours after processing!



RECOMMENDATION
Before using a high-pressure cleaning device, it is essential to test its effect on the product in a non visible place. Avoid puddles. The
ground has to be cleaned thoroughly before SICOROL W is applied. Protection against intense insolation during an thee hours after
processing as absolutely necessary.



CONSUMPTION
Approx. 80-100 ml.



PACKAGING AND DIMENSIONS
10l can, 25l can.



STORAGE AND SHELF LIFE
Keep away from frost, intense insolation and soiling in closed original container. 1 year.



SAFETY
For further information, please refer to the EG Safety Data Sheet.




This technical data sheet is a translation from German and does not consider local bulding codes or legal requirements. It shall be used as a general reference for the product.
Legally binding is only the German technical data. FABRINO GmbH & Co. KG I +49 (0) 8331 92506-0 I info@fabrino.eu I www.fabrino.eu
                                                                                                    75%
                                                                                                    40%




                                                     SICOROL ZE – SURFACE PROTECTION                                                                                         V1



PRODUCT DESCRIPTION
SICOROL ZE is a highly concentrated, liquid cleaning agent, based on an organic acid. SICOROL ZE is totally volatile and does not
leave damaging residues. It detaches cement remainders, lime sediments and bloomings.




FIELDS OF APPLICATION
For removal of residual mortar, cement remainders, bloomings, lime sediments and scale. Application on unplastered masonry and
facings, concrete paving stones, concrete products and washed-out concrete. SICOROL ZE can be applied without hesitation in food
and drinkwater area.



TECHNICAL PROPERTIES
‣ Colour: clear
‣ Consistency: liquid
‣ Density: 1.1 g/cm³



INSTRUCTIONS FOR USE
In principle SICOROL ZE is to be applied in diluted form. The grade of dilution depends on the extent of soiling. In principle SICOROL
ZE is to be processed in diluted form with protective glasses as well as with suitable gloves. The cleaning mixture is to be applied
by broom or other suitable tools. It must be observed to work only with acid-resistant material. Immediately after the agent is applied
onto the substances which should be detached, an intense foaming carbonic acid is created. This reaction has to be intensified by
adding warm water and rubbing with a brush. After this reaction has subsided, the treated area must be washed with water without
delay. If there a still any remaining residues, cleaning with SICOROL ZE must be repeated.



RECOMMENDATION
‣ SICOROL ZE is cauterizing.
‣ Rinse immediately with water in case of contact with skin.
‣ Always wear protective clothing.
‣ Application only in diluted form.
‣ Prevent from contact with metal.
‣ Not suitable for marble, gneiss or limestone.
‣ Test its effect in an unvisible place.
‣ If applied on enamel, we recommend a short application time and complete washing off with water immediately afterwards!



CONSUMPTION
Approx. 100-250 ml, depending on dilution.
Slight soiling: 1 (SICOROL ZE) : 15 (Water)
Severe soiling: 1 (SICOROL ZE) : 5 (Water)



PACKAGING AND DIMENSIONS
25kg can, 1.000kg container.



STORAGE AND SHELF LIFE
Keep away from frost and soiling. One year (closed); at +20°C.



SAFETY
For further information, please refer to the EG Safety Data Sheet.




This technical data sheet is a translation from German and does not consider local bulding codes or legal requirements. It shall be used as a general reference for the product.
Legally binding is only the German technical data. FABRINO GmbH & Co. KG I +49 (0) 8331 92506-0 I info@fabrino.eu I www.fabrino.eu

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:11
posted:12/13/2012
language:Unknown
pages:5