Docstoc

apc_s_m.ppt

Document Sample
apc_s_m.ppt Powered By Docstoc
					Michael Chrustowicz
APC Network Integration Engineer
     Small and Medium Business Solution:
  Built-in Serial UPS Support in Windows 2000
          PowerChute Business Edition

               APC Accessories:
       Interface Expander & Share UPS
           Relay Input/Output Card
        Out-of-Band Management Card
         Building Management Card
           Automatic Transfer Switch
                 Master Switch
    Environmental Monitoring Card and Unit
             Enterprise Solution:
   Web/SNMP& Network Managment Card
        PowerChute Network Shutdown
           APC Enterprise Manager
             PowerNet Manager
       APC ISX Monitoring & Software
Remote Monitoring & Network Integration Service
        Windows 2000, XP & 2003 Developed by
                       APC
 APC worked with Microsoft to create an improved built-in
 serial UPS capability to be included in the Windows
 Operating System


 New serial UPS support is easier to use, more
  reliable
 Supports basic signaling for virtually all UPS
  manufacturers
 Microsoft has included enhanced support of
  APC Smart and Simple-signaling UPSs in the
  operating system
DEMO
       for Small, Medium, and Departmental Business customers



   Optimized for managing UPSs over a network

   Builds on Standard PowerChute plus features


  Many new features:

- Console with Centralized View
- Mass Configuration
- UPS Status Report
- Security – Username & Password
- Power Analysis
- Recommended Actions
- Wizard-based setup
- Cross-segment discovery
               PowerChute Business Edition
                     architecture:
Agents sit on each server and talk to UPSs serially or via USB
Provides UPS status monitoring and, in the event of an extended power outage,
system shutdown capabilities for your UPS-protected computers. This software
must be installed on each of your computers that are directly attached to one of
the UPS systems.


Server collects information from all Agents
Used to configure and monitor the PowerChute Business Edition Agents. The
PowerChute Business Edition Server gathers information from the PowerChute
Business Edition Agents and provides centralized event tracking, event notification
and a single point of contact for the PowerChute Business Edition Console.
This software must be installed on one of your networked computers.

Management Console offers central view of all the information.
Connects to the PowerChute Business Edition Server to provide the user interface
for managing and configuring your UPS-protected systems. Install the PowerChute
Business Edition Console on any workstation, desktop or laptop
(running a supported operating system).
          PowerChute Business Edition architecture

PowerChute Business Edition                                        PowerChute Business Edition
         Server                                                             Agent



                                                              Serial Cable


                                               Windows 2000         PowerChute Business Edition
                                                  or NT                      Agent
   Windows 2000
      or NT


                                                                         Serial Cable
                                               Linux or Solaris

                      Windows 2000
                         or NT                                      PowerChute Business Edition
                                                                             Agent


                                                                  Serial Cable
PowerChute Business Edition
        Console                                     Netware
                                     NETWORK
                PowerChute Business Edition
            Builds on standard PowerChute plus features

Full UPS Monitoring, Configuration, Control, and Diagnostics
Graceful OS shutdown in the event of a extended power outage
Graceful shutdown of popular server applications
          Lotus Notes
          SQL Server
          Microsoft Exchange
          Microsoft BackOffice
          Web servers (Apache, IIS, Netscape)


Event Handling
          Broadcast notification
          Email and email/paging gateways
          Run command file


Scheduled shutdown and reboot

PowerNet SNMP Agent – integration for NMS

Support for Smart-UPS, Back-UPS, Back-UPS Pro and Matrix-UPS

The PowerChute Business Edition Agent can communicate with a supported UPS model
that connects through a Share-UPS or Interface Expander.
         PowerChute Business Edition
                    New Features:


Windows NT/2000-based Centralized Mgmt Console
Mass Configuration - Wizard-based Setup
Shutdown Schedule (version 6.1)
Security – User & Password
Power Analysis
Recommended Actions
UPS Discover
Browser-Based Agent Interface
Windows NT/2000-based Centralized
      Management Console



                            See status information of
                         UPSs on the network at-a-
                         glance regardless of OS



                            Allows Network Managers
                         to quickly assess power
                         status of their equipment



                           Includes support for
                         Measure UPS
Mass Configuration - Wizard-based Setup

                      Configure Settings,Shutdown,
                    and Email parameters for all UPSs
                    simultaneously


                                      Ensures
                                    consistent
                                    configuration and
                                    decreases setup
                                    time

                                      Configure during
                                    install of the
                                    console



                      Makes configuration easy
                    and quick
Shutdown Schedule
           Security – User & Password




User & Password security for PowerChute Business Edition
                    Agent & Server
                 Power Analysis


   Aids in
diagnosing
power problems




                                    Automatically
                                  generates graphical
                                  summaries of event
                                  and data logs
            Recommended Actions:




Displays probable cause of power event and recommends a
      course of action to correct the problem

Reduces need for training and speeds troubleshooting
                        UPS Discovery




Reduces setup time by finding all UPS on the network

5-node:
     - Local segment only
     - User can enter individual IP addresses that are outside the local segment

25-node; Includes Cross-Segment Discovery
Optional Browser-Based Agent Interface


                                   Included with every
                                  agent


                                  Gives OS-independent
                                  client capabilities


                                  Almost identical to the
                                Web/SNMP Management
                                Card interface


                                   Included as an option;
                                we recommend the
                                Management Console
                                instead.
2 Forms of Communication and what UPSs are
 supported with PowerChute Business Edition


 Smart Signalling
 – Back UPS Pro, Power Stack, Smart UPS, Matrix
 – Full management, diagnostic, control
   and shutdown functions

 Simple Signalling
 – Interface Expander, Share UPS, BK650MI,
   BK350CS, BK500CS, Silcon DP 300E, Symmetra
 – UPS status information that we need for shutdown:
     1. Online
     2. On Battery
     3. Battery Charged
     4. Battery Discharged
     5. No communication
 Smart Signalling Cable AP940-0024C or AP940-
 1524C (black) for all Operating Systems




                Simple Signalling Cable AP940-0020B (grey) for
                for all Operating Systems*
                * If you use PowerChute Plus it will work only with: Windows 2000,
                Windows NT, OS/2, Novell Netware, Windows 95/98 and ME




Simple Signalling Cable AP940-0023A (grey) only
for PowerChute Plus and Unix/Linux OS (except
Digital Unix, DEC OSF, SGI Irix, HP-UX on 800
Machines – these operating systems work only in
Smart Signalling Mode).
The IEC allows for communication between servers running
PowerChute Plus (Smart or Simple Signalling) and APC UPS
equipment to be extended up to 100 meters.

      Model AP9825i comes with
      a universal AC Adapter
      (APC Part Number AP9505i)

      + RJ45 Cable (15 m)
      Extendable up to 100 meters




 The box at the server end needs a universal 24 V Power Supply (APC Part Number
 AP9505i) and Smart or Simple Signalling cable.

 The box at the UPS side will receive power from the serial port
       Two versions available Worldwide
Free 5 Node Version:

 Install wherever you want, as many times as you want - (Agents,
  Server, Console)
 Each Server can manage up to 5 agents
 Download from web and included with every Smart-UPS soon, etc.


Purchase 25 Node version:

 Convenience of managing up to 25 agents at once (mass
  configuration, centralized event handling, etc.)
 Includes cross-segment discovery
 MANY additional features to follow
             PowerChute Business Edition
                Compatibility Chart


Windows NT                   - PCBE Agent, Server, Console
Windows 2000                 - PCBE Agent, Server, Console
Windows 2003                 - PCBE Agent, Server, Console
Novell Netware 5.1 & 6       - PCBE Agent only
Solaris2.x (Sparc)           - PCBE Agent only
Red Hat Linux 7.x, 8.0       - PCBE Agent only


Other platforms are supported with PowerChute Plus




          Free download from APC Web page!!!
DEMO
           APC Accessories:
   Interface Expander & Share UPS
       Relay Input/Output Card
    Out-of-Band Management Card
     Building Management Card
       Automatic Transfer Switch
             Master Switch
Environmental Monitoring Card and Unit
• Share-UPS and Interface Expander allow the user to
connect multiple OS-independent servers to a single UPS.

• Both products work with PowerChute Plus (PC+) and
PowerChute Business Edition (PCBE) software.

• Full UPS management, diagnostic, control and shutdown
functions are available in Smart Signalling on the advanced
port. Shutdown only is available in Simple Signalling on the
basic ports.

•Shutdown type:
       - Low Battery Signal
       - Timer Mode
       - Confirm Mode
                             Interface Expander
PC+ or PCBE Agent                                                     PC+ or PCBE Agent
in Smart Signalling                                                   in Simple Signalling

                                    UPS Serial Port – Advance port
                                    (Smart & Simple Signalling)

                 Smart Signalling
                     Cable




                                                      Simple Signalling
                                                        Cable only !




           Output Power


                                    Mains Power
                                                                                         UPS Serial Port
        Share UPS                              Monitoring Port

    Basic Ports
(Simple Signalling)
                             Advance Port
                      (Smart & Simple Signalling)




                           Simple Signalling                     Smart Signalling
                              Cable only !                           Cable


                                                                                           Mains Power




        PC+ or PCBE Agent             Output Power                PC+ or PCBE Agent
        in Simple Signalling                                       in Smart Signalling
          Smart Interface Expander



                            The Smart Signalling I/E is
                           good for customers who need
                           to connect more than one
                           server running an OS which
                           supports PowerChute
                           Busienss Edition or
                           PowerChute Plus only with
                           smart signalling.

Operating Systems that are supported only with Smart
   Signalling:
1. Digital Unix (Compaq Tru64),
2. SGI Irix
3. HP-Ux on 300/800 Series servers
              Smart Interface Expander


           Smart Signalling Cable




PowerChute
Business Edition                    Smart Signalling Cable
working in Smart
Signalling mode

                                               PowerChute
                                               Business Edition
                                               working in Smart
                                               Signalling mode
                                     APC’s SmartSlot Relay I/O Module allows
                                     control and monitoring of power through a
                                     simple dry contact interface, a communication
                                     format favored by manufacturers of PBX’s,
                                     telecom management devices, and alarm
                                     management systems.

Input signals cause the UPS to do the following actions:

 Turn the UPS on/off
 Initiate self-test
 Shutdown the UPS

Output signals can be sent under 6 conditions:

   UPS is on battery
   UPS has low battery
   UPS has lost communication with I/O Module
   Replace UPS battery
   UPS is overloaded
   Any UPS fault/self-test failure or overload
Out-of-Band Management Card allows user to
remotely manage a UPS. Provides complete
UPS information, paging on power problems
and remote safe reboot. Users can
communicate with their UPS during power
outages or if the server is down.


                                             Modem

                            Phone network
            Modem




                             Pager
      Out-of-Band Management Card Features

                                   Paging Capabilities
                               - Out-of-band
                               Management card can
                               dial 2 pagers to alert users
                               about potential problems
                               at specific sites




     Security Features
- User-selectable password
protection
- Dial back security
(optional)
A SmartSlot card allowing the customer
to integrate an APC Silcon UPS to their
current Building Management Solution.
The card communicates to the BMS via
MODBUS/JBUS protocol. In this way,
UPS variables can be monitored
through various Building Management
System vendors’ software.



The Building Management Integration Card requires the
following:

• An APC Silcon series (DP300E) UPS
• An APC Silcon Triple Chassis (AP9604S—included with your Silcon
series UPS)
         Example
                                                         Server



                                        Gateway
                                        from BMS
                                        vendor


                   Translator
                   from BMS
                   vendor
    UPS                                  Translator
                                         from BMS
                                         vendor
APC’s Integrations:

   Integrate with DataTrax’s Foreseer II software
   Integrate with Automated Logic Corporation software via Portal
   Johnson Controls’ Metasys via MIG
• 1400VA and 3000VA Automatic Transfer Switch accessories offer network
managers 7x24 AC power and continuous availability of safe shutdown.

• Automatic Transfer Switch has two input plugs. It is designed to supply power
to the load from a primary AC line. If that AC power was not available due to
an overloaded circuit, failed UPS, extreme weather, or even user error, the
Redundant Switch will automatically begin sourcing power from the secondary
AC line. The transfer from on line to the other is seamless to your server or
networking device.
Good
In this application, the ATS is connected
to two separate AC sources. Loads with
a single or multiple power cords can now
have N+1 power paths in case of a single
AC source failure.



Better
In this application, the ATS is
connected to two separate AC
sources. A single Smart-UPS is
then connected to the ATS, thereby
providing the Smart-UPS with dual
AC input feeds.


Best
In this application, a ATS is used with two
identical Smart-UPS and PowerChute plus. Both
Smart-UPS will provide continuous EMI/RFI
filtering and surge suppression. Battery backup is
available in case of a primary or redundant AC
source failure. In case of a severe power event,
the redundant Smart-UPS will continue to
support the load and also provide graceful
shutdown for perating systems.
Network Power Distribution Unit for complete
manageability of your power.
                          8 individual outlet control attached
                          devices
                          Web/Telnet/ SNMP remote
                          manageability
                           Multiple-user definable accounts
                          MD5- authentification
                          10A or 16A at 208V/230V
                          Flash Upgradeable
                          Universal power supply
                          Horizontally mounted – 1U space
MasterSwitch Vertical Mount AP9222
(Controller With SNMP +
Vertical strip) and AP9222EXPX166
(vertical expansion)



                     8 individually controlled outlets
                    Web/Telnet/ SNMP remote manageability
                    16A/20A at 208V/230V
                    Current sensing and set alarm thresholds
                    Hardwire capable
                    Power-up sequencing
                    Flash Upgradeable
                    Universal power supply
                    Daisy chainable (only one controller is needed for every 4 PDUs)
                    Vertically mounted "0 U" space
  The Measure-UPS Card allows the customer to monitor
  environmental aspects of designated location.

 Sensors for temperature & humidity continuously monitor environment of your
  valuable equipment
 4 user-definable external inputs for use with contacts, i.e. fire, water, smoke,
  unauthorized entry, physical security or any external
  condition that can be measured via contact closure.
 User-selectable thresholds allow you to decide when you need to be notified of
  potential environmental problems .




                                     Lights    Air Conditioning   Smoke   Intrusion
The Stand-Alone Environmental Monitoring Unit (EMU)
performs continuous temperature and humidity sensing and
contact monitoring without a UPS connection.



Product Features:

Temperature and Humidity Monitoring
Contact Monitoring
Notification via E-mail or SNMP
Manageability via Web, Telnet, or SNMP
Two user access levels: administrative
and device management
             Enterprise Solution:
         Network Managment Card
        PowerChute Network Shutdown
           APC Enterprise Manager
             PowerNet Manager
Remote Monitoring & Network Integration Service
APC Network Management Cards provide full management of UPS via
multiple open standards like Telnet, HTTP, FTP, and SNMP. Using the
10/100BaseT Network Management Cards, you can monitor and
configure your APC UPS to shut down and reboot your computer
systems, send Email alerts and view the event log. The 10/100
Network Management card adds scheduling and data-logging along
with a modular design for future features.
              Network Management
                     Card

Network Management Card - AP9617


Network Management Card - AP9619
- Relay I/O Module
- Environment Monitoring Probe
- Contact Monitoring


Network Management Card - AP9618
- Relay I/O Module
- Environment Monitoring Probe
- Contact Monitoring
- Modem – out of band connection
     Network Management Card features:
•   UPS Management – Status, Control, Configuration, Diagnostic
•   “In Band” Management (10T& 100T Based)
      – HTTP, SSL, TSL – access via WEB, secure connection via SSL and TSL
      – Telnet, SSH – access to text console, secure connection via SSH
      – SNMP – access via SNMP commands, integration into Network Management
        Station
      – FTP, SCP – firmware upgrade, download of the logs files, secure connection
        via SCP
      – WAP – read only access via mobile phone
•   Logging
      – Event Logging – event log as a text file – download possible
      – Data Logging – data log as a text file – download possible
      – Email Notification – 4 different email recipients
      – SYSLOG – messaging for centralized logging servers
•   Three User:
    - Administrator – access to all settings
    - Device Manager – access to UPS settings only
    - Read only – monitoring only
•   Support Network Time Protocol – automatic time and date update
Network Management Card Configuration :


 APC Management Card
 Wizard




                    Terminal Session (direct serial Connection)




 APC Security Wizard for
   - SSH finger print
   - SSL and TSL Certificates
                 Firmware Upgrade

   Terminal Session – direct
   serial Connection - Xmodem




                                FTP - over network




DO NOT USE APC WIZARD FOR FIRMWARE UPGRADE !
DEMO
                 Overview & Features
                                      Features:
APC's PowerChute Network
Shutdown software works in             Graceful System Shutdown
conjunction withthe APC
                                       Shutdown Confirmation
Web/SNMP Management Card to
provide graceful, unattended           Web Interface
shutdown of multiple computer
                                       MD5 Authentication Security
systems over a network. Its
scalable architecture can support      Run Command File
a virtually unlimited number of
                                       Scalable Architecture
client systems. Administrators can
quickly configure it via a browser-    UPS Status Checking
based interface, and can customize
                                       Configurable Actions
command files to run on each
server in the event of an              Configurable Conflict Detection
unattended shutdown.
                                       Communication via Network
                                   Power Distribution Panel         Input Power
Room 1

                                                      +
                PCNS
                                     Network Management
                                            Card

         PCNS




         PCNS                                             PCNS



                  PCNS                   PCNS




Room 2                   Network                                 Room 3
             Installation of PowerChute Network Shutdown
                                    PCNS asks for:IP address, user
                                    name & password of the
                                    Web/SNMP Card !




During installation PCNS
registers IP Address of your
machine into the Web/SNMP
Card so that the WEB/SNMP
Card knows to which IP
addresses it has to send out
the Alarms.
      How to access PowerChute Network Shutdown ?

Open browser and use as address:

• Access remotely - http:// <IP Address of remote machine>:3052
• Access locally - http://127.0.0.1:3052
Flex-Events
New PowerChute Network Shutdown version 220
       supports more that one UPS !!!




         Power Supply 2      Power Supply 1




                          NETWORK
           PowerChute Network Shutdown
                Compatibility Chart


Windows NT             4.0           PCNS version 220
Windows 2000/2003      5.0           PCNS version 220
Novell Netware         5.x & 6       PCNS version 201
HP-UX                  10.2, 11.00   PCNS version 201
Solaris                2.x           PCNS version 220
AIX                    4.3.x         PCNS version 201
Red Hat Linux          7.x, 8        PCNS version 220



          Free download from APC Web pages!!!
DEMO
• Real-time management and inventory
  reporting application for APC power
  protection solutions.

• Provides real-time status and
  recommended actions for APC UPS
  systems and APC MasterSwitch products.

• Provides event notification via email based
  on both user-defined thresholds and UPS
  alarms.
              APC Enterprise Manager
APC Enterprise Manager enables you to capture, organize and assess, vital
information concerning your APC devices from a single console. APC Enterprise
Manager greatly simplifies management of your power infrastructure by providing
centralized management for all your APC Equipment.
                    Features/Benefits
•   On demand battery status reports
     – Detailed reports on battery age, load, health, etc
     – Facilitates the timely replacement of UPS batteries, reducing a major
       risk of downtime
•   Automatic email notification
     – Emails administrators when UPS variables fall outside user-defined
       thresholds
     – Eliminates need to proactively check on health of APC power
       infrastructure
•   Downtime and On Battery Reports
     – Unique reports help determine runtime necessary throughout the
       network
     – Helps network administrators to increase availability by pinpointing
       devices that require additional runtime
•   Broad Support for APC Devices
     – Including UPSs, MasterSwitch, APC Management Cards,
       Environmental Monitoring Card and PowerChute SNMP agents
     – Allows Network Managers to quickly access status of their entire APC
       power infrastructure
         APC Enterprise Manager
           Compatibility Chart

Windows NT         - APC Enterprise Manager version 3.0

Windows 2000       - APC Enterprise Manager version 3.0

 Availability:
 APC E-commerce website, or APC Resellers

APC Enterprise Manager, up to 25 APC UPSs
APC Enterprise Manager, up to 100 APC UPSs
APC Enterprise Manager, up to 1,000 APC UPSs
APC Enterprise Manager, up to 10,000 APC UPSs
Demo
APC PowerNet Manager is a full featured robust power
management application that is tightly integrated with Network
Management Station. It allows users to monitor and configure
their APC UPSs, as well as shutdown and reboot the UPS
      Features & Benefits
Administration
          •   UPS Operating Parameters
          •   UPS Identification Parameters
          •   SNMP Agent Parameters
          •   Put UPS to sleep

Diagnostics
          •   UPS Self-test
          •   Test UPS Alarm
          •   SNMP trap based events logged in HP OpenView
          •   UPS Runtime Calibration
Shutdown/Reboot
          •   Reboot Load
          •   Turn off UPS
          •   Safe System Shutdown
PowerNet Manager Compatibility Chart


• PowerNet Manager for CA Unicenter TNG

• PowerNet for Tivoli Enterprise

• PowerNet Manager for Novell ManageWise

• PowerNet Manager for Dell Network Node Manager (NNM) SE

• PowerNet Manager for HP OpenView Network Node Manager (NNM)

• PowerNet Manager for HP OpenView Workgroup Node Manager (WNM)

• PowerNet for CiscoWorks 2000
APC ISX Manager
   Location
APC ISX Manager & Hub



            • Resides on top of PDU
              with the 32 port hub
            • Gathers information
              from sub-systems
            • 1 U thin Server
            • 1 U thin Hub
            • Does not affect
              availability of PSX
               APC ISX Manager
               General Overview


Features:

• Web-based GUI
• Auto-discovery of APC sub-
  system components
• Event Log
• User-configurable actions for
  event categories
• Notification via email to
  user(s)
• Time/date stamps alarms in
  event log
 Sub-systems in ISX Architecture


• APC Network Management Card &
  Symmetra 3-Phase UPS

• Automatic Transfer Switch

• Environmental Monitoring Unit

• PDU and Outlet Strips
APC Network Management Card
    Symmetra 3-Phase UPS



              APC Network Management Cards
              provide full management of UPS via
              multiple open standards like Telnet,
              HTTP, FTP, and SNMP. Using the
              10/100BaseT Network Management
              Cards, you can monitor and
              configure your APC UPS to shut
              down and reboot your computer
              systems, send Email alerts and view
              the event log. The 10/100 Network
              Management card adds scheduling
              and data-logging along with a
              modular design for future features.
Automatic Transfer Switch


                                      U      ATS            U
                                      P                     P
                                      S                     S


APC's Automatic Transfer Switch (ATS), is a high availability
switch that has two input cords, one for each AC line, which
provide redundant power to connected equipment. This product
is designed to supply power to the load from a primary AC line.
If that AC power becomes unavailable due to any reason, the
ATS will automatically begin sourcing power from a secondary
AC line. The transfer time from one line to another is seamless
to the connected equipment.
       Environmental
       Monitoring Unit

Stand-Alone Unit for network
administrators to monitor
environmental conditions in a rack,
computer room and data center
environments

General Features:
•Temperature & Humidity monitoring
•Web/SNMP & Telnet management,
•Dry Contact inputs,
•E-mail notification,
•Event logging,
•MD5 Authentication,
•Rack Mount,
•Status Indicator LED‘s
Rack Mount PDU




      • Single phase input capable
      • 21 receptacles each per Base
               Building Block
      • Universal twist lock connector
      • Plug locking clips
      • “tool-less” installation in Base
               Building Block
                Information Controller         ISX N+1 Architecture
                     & PSX Hub


                                         EMU             EMU




Web/SNMP
  Card



           Public Network                Metered Rack-Mount PDUs
Information Controller                        ISX 2 N+1 Architecture
     & PSX Hub


                              EMU


                               ATS




Public Network           Metered Rack-Mount PDUs
                     APC ISX Manager
                          & Hub


                                             EMU           EMU

                                             SERVER+PCNS   SERVER+PCNS


                                             SERVER+PCNS   SERVER+PCNS


                                             SERVER+PCNS   SERVER+PCNS


                                             SERVER+PCNS   SERVER+PCNS

                                             SERVER+PCNS   SERVER+PCNS

                                             SERVER+PCNS   SERVER+PCNS


                                             SERVER+PCNS   SERVER+PCNS

                                             SERVER+PCNS   SERVER+PCNS


                                             SERVER+PCNS   SERVER+PCNS

Network Management                           SERVER+PCNS   SERVER+PCNS
       Cards


                            Public Network
Remote Monitoring

An outsourced remote monitoring
solution that proactively monitors
UPS(s) and the surrounding
environment 24x7 to enhance high
availability in networking and facility
environments.

Network Integration Service

Provides installation and configuration
on site of APC Accessories & Software. It
includes also test of configuration and
training of all installed APC Accessories
& Software.
Remote Monitoring

An outsourced remote monitoring
solution that proactively monitors
UPS(s) and the surrounding
environment 24x7 to enhance high
availability in networking and facility
environments.

Network Integration Service

Provides installation and configuration
on site of APC Accessories & Software. It
includes also test of configuration and
training of all installed APC Accessories
& Software.

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:2
posted:12/8/2012
language:Latin
pages:86