Docstoc

Elastic floor covering on new calcium sulphate flow Emicode

Document Sample
Elastic floor covering on new calcium sulphate flow Emicode Powered By Docstoc
					                                  GEV Invitation to Tender text



Elastic floor covering on new calcium sulphate flow screed
(normal loading, castor-resistant)

Technical preliminaries

Work shall be performed in accordance with the specifications set forth in ATV DIN 18365
“Bodenbelagarbeiten” (Floorcovering work) or comparable national standards. To prevent and avoid
persistent indoor pollution due to volatile organic compounds (VOC), very low-emission flooring
materials compliant with the state of the art shall be used. These must carry the registered label
           ®                         ®
EMICODE EC1* or EMICODE EC1plus* of the GEV (Gemeinschaft Emissionskontrollierte
Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V. / Association for the Control of Emissions in
Products for Flooring Installation, Adhesives and Construction Materials). As evidence of the conformity
of the products, a copy of the GEV licence is to be included in the bid documents. This applies in all
cases as the German technical regulations on hazardous substances, TRGS 610 (issue January 2011),
no longer permit any exceptions involving the use of solvent-containing products.

Bill of quantities

Item    Qty.         Description                                     Unit price             Total price
1.0                  m² calcium sulphate flow screed to be prepared
                     by grinding prior to application of a levelling
                     compound, vacuuming with an industrial-grade
                     vacuum cleaner.

2.0                  m² prepared calcium sulphate flow screed
                     surface to be primed by roller-application with a
                     very low-emission primer labelled EMICODE®
                     EC1* or EMICODE® EC1plus* as per GEV.
                     Brand: ....................................................,
                     Manufacturer: ....................................................
3.0                  m² of above-mentioned, primed area to be
                     levelled with a self-smoothing, very low-
                     emission levelling compound, labelled
                     EMICODE® EC1* or EMICODE® EC1plus* as
                     per GEV.
                     Brand: ...................................................,
                     Manufacturer: ...................................................
4.0                  Install/bond floor covering

4.1                  m² PVC floor covering as per EN 649 to be
                     supplied.

                     Brand: ............................................................,
                     Manufacturer: ................................................,
                     Colour: ...........................................................,
                     Design/article:::::::::::::::::::::::::::::::::::::::::::::::::::

                     Sheet material, dimensions: ..... cm wide,
                                                   ..... mm thick

                     or tiles, dimensions: ..... cm x ….. cm,
                                                      ..... mm thick

                     or planking, dimensions: ..... cm x ….. cm,
                                                                                                Page 1 of 3
                    GEV Invitation to Tender text



                                                   ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1*
      or EMICODE® EC1plus* as per GEV, to the
      substrate prepared as specified above.
      Brand: ................................................
      Manufacturer: ................................................
4.2   m² linoleum floor covering as per DIN 548 to be
      supplied.
      Brand: .............................................................,
      Manufacturer: .................................................,
      Colour: ............................................................,
      Design: ...........................................................,
      Sheet material, dimensions: ..... cm wide,
                                                 ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1*
      or EMICODE® EC1plus* as per GEV, to the
      substrate prepared as specified above.
      Brand:     ..............................................
      Manufacturer: .............................................


4.3   m² rubber floor covering as per EN 1817, with a
      smooth, ground underside and a flat surface, to
      be supplied
      Brand: ............................................................,
      Manufacturer: ................................................,
      Colour: ...........................................................,
      Design: ...........................................................,
      Sheet material, dimensions: ....... cm wide,
                                                 ....... mm thick

      or tiles, dimensions: ..... cm x ….. cm,
                                       ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1*
      or EMICODE® EC1plus* as per GEV, to the
      substrate prepared as specified above.
      Brand:            ....................................................
      Manufacturer:
      ....................................................

4.4   m² rubber floor covering as per EN 12199, with
      a smooth, ground underside and a profiled
      surface, to be supplied
      Brand: .............................................................,
      Manufacturer: .................................................,
      Colour: ............................................................,
      Design: ...........................................................,


                                                                               Page 2 of 3
                               GEV Invitation to Tender text



                 Tiles, dimensions: ..... cm x ….. cm,
                                                ..... mm thick

                 and bonded full-surface using a very low-
                 emission adhesive, labelled EMICODE® EC1*
                 or EMICODE® EC1plus* as per GEV, to the
                 substrate prepared as specified above.
                 Brand:            ....................................................
                 Manufacturer:
                 ....................................................


* or, as appropriate, EMICODE® EC 1-R or EMICODE® EC1plus-R for regulated flooring
materials




                                                                                          Page 3 of 3

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:1
posted:12/5/2012
language:Latin
pages:3