Docstoc

Elastic floor covering on new cement screed Emicode

Document Sample
Elastic floor covering on new cement screed Emicode Powered By Docstoc
					                                 GEV Invitation to Tender text



Elastic floor covering on new cement screed
(normal loading, castor-resistant)

Technical preliminaries

Work shall be performed in accordance with the specifications set forth in ATV DIN 18365
“Bodenbelagarbeiten” (Floorcovering work) or comparable national standards. To prevent and avoid
persistent indoor pollution due to volatile organic compounds (VOC), very low-emission flooring
materials compliant with the state of the art shall be used. These must carry the registered label
           ®                         ®
EMICODE EC1* or EMICODE EC1plus* of the GEV (Gemeinschaft Emissionskontrollierte
Verlegewerkstoffe, Klebstoffe und Bauprodukte e.V. / Association for the Control of Emissions in
Products for Flooring Installation, Adhesives and Construction Materials). As evidence of the conformity
of the products, a copy of the GEV licence is to be included in the bid documents.
This applies in all cases as the German technical regulations on hazardous substances, TRGS 610
(issue January 2011), no longer permit any exceptions involving the use of solvent-containing products.
3.2    Bill of quantities

Item    Qty.       Description                                                                 Unit    Total price
                                                                                               price
1.0                m² cement screed to be prepared by grinding
                   prior to application of a levelling compound,
                   vacuuming with an industrial-grade vacuum
                   cleaner.

2.0                m² prepared cement screed surface to be primed
                   by roller-application with a very low-emission
                   primer labelled EMICODE® EC1* or EMICODE®
                       plus
                   EC1 * as per GEV.
                   Brand: ....................................................
                   Manufacturer: ....................................................

3.0                m² of above-mentioned, primed area to be
                   levelled with a self-smoothing, very low-emission
                   levelling compound, labelled EMICODE® EC1*
                   or EMICODE® EC1plus* as per GEV.
                   Brand: ....................................................
                   Manufacturer: ....................................................

4.0                Install/bond floor covering

4.1                m² PVC floor covering as per EN 649 to be
                   supplied

                   Brand: .............................................................,
                   Manufacturer: .................................................,
                   Colour: ................................................................,
                   Design/article: ::::::::::::::::::::::::::::::::::::::::::::::::::::::

                   Sheet material, dimensions: ..... cm wide,
                                                 ..... mm thick

                   or tiles, dimensions: ..... cm x ….. cm,
                                                    ..... mm thick


                                                                                                           Page 1 of 3
                    GEV Invitation to Tender text




      or planking, dimensions: ..... cm x ….. cm,
                                      ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1* or
      EMICODE® EC1plus* as per GEV, to the substrate
      prepared as specified above.
      Brand: ................................................
      Manufacturer: ................................................

4.2   m² linoleum floor covering as per EN 548 to be
      supplied
      Brand: .............................................................,
      Manufacturer: .................................................,
      Colour: ................................................................,
      Design: ...............................................................,
      Sheet material, dimensions: ..... cm wide,
                                                 ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1* or
      EMICODE® EC1plus* as per GEV, to the substrate
      prepared as specified above.
      Brand:    ..............................................
      Manufacturer: .............................................


4.3   m² rubber floor covering as per EN 1817, with a
      smooth, ground underside and a flat surface, to
      be supplied
      Brand: .............................................................,
      Manufacturer: .................................................,
      Colour: ................................................................,
      Design: ...............................................................,
      Sheet material, dimensions: ....... cm wide,
                                                 ....... mm thick

      or tiles, dimensions: ..... cm x ….. cm,
                                       ..... mm thick

      and bonded full-surface using a very low-
      emission adhesive, labelled EMICODE® EC1* or
      EMICODE® EC1plus* as per GEV, to the substrate
      prepared as specified above.
      Brand:    ....................................................
      Manufacturer: ..........................................

4.4   m² rubber floor covering as per EN 12199, with a
      smooth, ground underside and a profiled surface,
      to be supplied
      Brand: .............................................................,
      Manufacturer: .................................................,


                                                                                  Page 2 of 3
                               GEV Invitation to Tender text



                 Colour: ................................................................,
                 Design: ...............................................................,
                 Tiles, dimensions: ..... cm x ….. cm,
                                                            ..... mm thick

                 and bonded full-surface using a very low-
                 emission adhesive, labelled EMICODE® EC1* or
                 EMICODE® EC1plus* as per GEV, to the substrate
                 prepared as specified above.
                 Brand:    ....................................................
                 Manufacturer: ..........................................


* or, as appropriate, EMICODE® EC 1-R or EMICODE® EC1plus-R for regulated flooring
materials




                                                                                             Page 3 of 3

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:10
posted:12/5/2012
language:Unknown
pages:3