Embroidered Promotional Jacket garment

Document Sample
Embroidered Promotional Jacket garment Powered By Docstoc
					Abrasive Water Jet Cutting technology

Waterjet cutting could be the amazing technology which uses water in
questionable to provide amazing designs and carvings in a variety of
materials. They are utilized in different industry application areas like
metals, stones and tiles, glass, paper and packaging, food, aerospace,
and automotive etc. These are hugely employed in carving creative and
technology driven flooring inlays in various places. Indeed, waterjet
cutting may be known as the most effective technology among all one
other traditional procedure for cutting. However, there are numerous
factors that have an effect on its ultimate results. Here's a few: Water jet
superior in cutting soft materials that have 'permeable' thickness like
leather, paper, foams, and carpets etc. Even materials that are little
harder like rubber, plywood about 10mm, fiberglass up to 6mm, or foils
could be cut with pure water understanding that too at quite a fast pace.

However, only pure water is not sufficient to remove hard materials such
as stone, thick plywood, glass, metals and plastics. To address this
matter, abrasives like sand are being used together with water in waterjet
cutting method today. This can be used to take perhaps the hardest of
materials like Aluminum Oxide, Silicone Nitride and Silicone Carbide.
Speed from the waterjet is significant find the desired effect in different
material in this cutting method. According to industry standards, for half
the thickness, the speed is more than twice greater. And, interestingly
this speed might be increased by doubling the abrasive feed rate as per
the thickness on the material that utilizes waterjet cutting technology. As
waterjet cutting technology uses water in ruthless, it's very necessary to
take advantage of the appropriate pressure so you can get effective
results. Usually more pressure means higher energy inside the material.
It is often found out that by using a pressure increase of 10%, you can
get in excess of 10% of cutting speed.

Take into consideration these factors and rest assured you may get the
best results because of this technology on all kinds of materials including
flooring inlays. Waterjet Cutting, a way in which a stream of water is
enforced through the small nozzle for a extremely high pressure, offers
numerous exceptional potentials and benefits that let the cutting of
materials and parts often considered very costly or even impossible for
some other processes just like laser and die cutting. By developing garnet
on the water stream the way it exits the jets, abrasive waterjet cutters are
able to cut with the hardest of materials including stone and metals,
leaving smooth, extremely accurate edges.

Waterjet cutting can be an inexpensive and also effective method that
makes use of the strength of water in the high-pressure to slice various
materials. Abrasive Water Jet Cutting Waterjet systems are often
computer controlled and are generally very accurate and fine. The brittle
material, compressible materials could be fabricated without difficulty
with the assistance of Cutting services. The process of waterjet cutting is
recognized as very versatile because it is green and even isn't going to
cause any problems for the content as you move the process is on. There
are particular procedures which only waterjet are capable of doing. It
could possibly cut intricate designs on varied surfaces. Fine details might
be cut through the use of waterjet cutting technology

Shared By:
Description: Shreeya Technologies was established with aim of providing innovative product such as CNC Water jet Cutting Machine and Laser Engraving & Cutting machine in domestic and international market.