SECTION 01 31 00 - PROJECT MANAGEMENT AND COORDINATION
PART I - GENERAL
A. This Section includes administrative provisions for coordinating construction operations on
the Project related to the following:
1. Coordination Drawings.
1.2 COORDINATION DRAWINGS
A. Prepare Coordination Drawings if limited space is available, and maximum utilization of
space is required for efficient installation of different components or if coordination is
required for installation of products and materials fabricated by different Contractors.
B. Content: Provide project-specific information, drawn accurately to scale. Do not base
Coordination Drawings on reproductions of the Contract Documents. Include the following
information, if applicable:
1. Indicate functional and spatial relationships of architectural, structural, civil, mechanical,
and electrical system components.
2. Indicate required installation sequences.
3. Indicate dimensions shown on the Contract Drawings and make specific note of
dimensions that appear to be in conflict with submitted equipment and minimum
clearance requirements. Provide alternate sketches to AE for resolution of such
conflicts. Minor dimension changes and difficult installations will not be considered
changes to the Contract.
C. Responsibility: Each Contractor has the responsibility to submit Coordination Drawings
when required per this Section. Each Contractor who has Assigned Subcontractors shall
have overall responsibility for the Coordination Drawings of their Assigned Subcontractors.
D. Number of Copies: Submit ( ) copies of each Coordination Drawing submittal to the
PART 2 - PRODUCTS
PART 3 - EXECUTION
END OF SECTION 01 31 00
This section of the U of I Facilities Standards establishes minimum requirements only.
It should not be used as a complete specification.
U OF I FACILITIES STANDARDS 01 31 00- 1 PROJECT MANAGEMENT AND
ADDENDUM NO. 2 – NEW SECTION COORDINATION
LAST UPDATED NOVEMBER 1, 2011