Health and safety in welding and allied processes Sampling of airborne particles and gases in the operator s breathing zone Part 1 by 858t3bG

VIEWS: 0 PAGES: 260

									                                  SECTIUNEA 1, CAPITOLUL 1

  Standarde europene ce se adopta ca standarde române prin elaborarea versiunii
                                  române (T)

                                                                                                       Pa-
                                                                                              Metoda
Nr                                                                                                     gini      Mini-
                   Indicativ EN                             Titlu                             adop-          CT
crt                                                                                                    eligi     ster
                                                                                               tare
                                                                                                       bile
      1 EN ISO 6887-5:2010        Microbiology of food and animal feeding stuffs -            NCT         11 95 MADR
                                  Preparation of test samples, initial suspension and
                                  decimal dilutions for microbiological examination - Part
                                  5: Specific rules for the preparation of milk and milk
                                  products (ISO 6887-5:2010)
      2 EN ISO 17375:2006         Animal feeding stuffs - Determination of aflatoxin B1     NCT          13   95 MADR
                                  (ISO 17375:2006)
      3 EN ISO 11260:2011         Soil quality - Determination of effective cation exchange TR            9 285 MADR
                                  capacity and base saturation level using barium
                                  chloride solution (ISO 11260:1994+Cor 1:1996)

      4 EN ISO 14240-1:2011       Soil quality - Determination of soil microbial biomass -    TR          4 285 MADR
                                  Part 1: Substrate-induced respiration method (ISO
                                  14240-1:1997)
      5 EN ISO 14240-2:2011       Soil quality - Determination of soil microbial biomass -    TR         10 285 MADR
                                  Part 2: Fumigation-extraction method (ISO 14240-
                                  2:1997)
      6 EN 15725:2010/AC:2012     Extended application reports on the fire performance of TR              1 217 MAI
                                  construction products and building elements

      7 EN 15757:2010             Conservation of Cultural Property - Specifications for      TR         12 380 MCPN
                                  temperature and relative humidity to limit climate-
                                  induced mechanical damage in organic hygroscopic
                                  materials
      8 EN 15758:2010             Conservation of Cultural Property - Procedures and          TR         15 380 MCPN
                                  instruments for measuring temperatures of the air and
                                  the surfaces of objects
      9 EN 15886:2010             Conservation of cultural property - Test methods -          TR          8 380 MCPN
                                  Colour measurement of surfaces
  10 EN 61290-3:2008              Optical amplifiers - Test methods -- Part 3: Noise figure   NCT         9 138 MCSI
                                  parameters
  11 EN 15943:2011                Curriculum Exchange Format (CEF) - Data model               NCT        15 379 MCSI
  12 EN 15981:2011                European Learner Mobility - Achievement information         NCT        35 379 MCSI
                                  (EuroLMAI)
  13 EN 15982:2011                Metadata for Learning Opportunities (MLO) -                 NCT         9 379 MCSI
                                  Advertising
  14 EN ISO 13918:2008            Welding - Studs and ceramic ferrules for arc stud           NCT        19   39 MDRT
                                  welding (ISO 13918:2008)
  15 EN ISO 14555:2006            Welding - Arc stud welding of metallic materials (ISO       NCT        44   39 MDRT
                                  14555:2006)
  16 EN ISO 15630-1:2010          Steel for the reinforcement and prestressing of concrete    NCT        19   42 MDRT
                                  - Test methods - Part 1: Reinforcing bars, wire rod and
                                  wire (ISO 15630-1:2010)
  17 EN ISO 15630-2:2010          Steel for the reinforcement and prestressing of concrete NCT           15   42 MDRT
                                  - Test methods - Part 2: Welded fabric (ISO 15630-
                                  2:2010)
  18 EN ISO 15630-3:2010          Steel for the reinforcement and prestressing of concrete NCT           27   42 MDRT
                                  - Test methods - Part 3: Prestressing steel (ISO 15630-
                                  3:2010)
  19 EN ISO 1479:2011             Hexagon head tapping screws (ISO 1479:2011)                 NCT         4   59 MDRT
  20 EN ISO 3506-1:2009           Mechanical properties of corrosion-resistant stainless      NCT        21   59 MDRT
                                  steel fasteners - Part 1: Bolts, screws and studs (ISO
                                  3506-1:2009)
  21 EN ISO 3506-2:2009           Mechanical properties of corrosion-resistant stainless      NCT        17   59 MDRT
                                  steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
22 EN ISO 3506-3:2009      Mechanical properties of corrosion-resistant stainless      NCT   14   59 MDRT
                           steel fasteners - Part 3: Set screws and similar
                           fasteners not under tensile stress (ISO 3506-3:2009)

23 EN ISO 4014:2011        Hexagon head bolts - Product grades A and B (ISO     NCT          11   59 MDRT
                           4014:2011)
24 EN ISO 4016:2011        Hexagon head bolts - Product grade C (ISO 4016:2011) NCT           8   59 MDRT

25 EN ISO 4017:2011        Hexagon head screws - Product grades A and B (ISO           NCT    9   59 MDRT
                           4017:2011)
26 EN ISO 4018:2011        Hexagon head screws - Product grade C (ISO                  NCT    7   59 MDRT
                           4018:2011)
27 EN ISO 4759-1:2000      Tolerances for fasteners - Part 1: Bolts, screws, studs     FCT   17   59 MDRT
                           and nuts - Product grades A, B and C (ISO 4759-
                           1:2000)
28 EN ISO 4759-3:2000      Tolerances for fasteners - Part 3: Plain washers for  FCT          7   59 MDRT
                           bolts, screws and nuts - Products grades A and C (ISO
                           4759-3:2000)
29 EN ISO 7049:2011        Cross-recessed pan head tapping screws (ISO/FDIS       NCT         4   59 MDRT
                           7049:2011)
30 EN ISO 7091:2000        Plain washers - Normal series - Product grade C (ISO FCT           6   59 MDRT
                           7091:2000)
31 EN 14399-7:2007         High-strength structural bolting assemblies for        NCT        11   59 MDRT
                           preloading - Part 7: System HR - Countersunk head bolt
                           and nut assemblies
32 EN 14399-8:2007         High-strength structural bolting assemblies for             NCT   11   59 MDRT
                           preloading - Part 8: System HV - Hexagon fit bolt and
                           nut assemblies
33 EN 14399-9:2009         High-strength structural bolting assemblies for             NCT   15   59 MDRT
                           preloading - Part 9: System HR or HV - Direct tension
                           indicators for bolt and nut assemblies
34 EN ISO 6789:2003        Assembly tools for screws and nuts - Hand torque tools - FCT       9   79 MDRT
                           Requirements and test methods for design
                           conformance testing, quality conformance testing and
                           recalibration procedure (ISO 6789:2003)


35 EN 491:2011             Concrete roofing tiles and fittings for roof covering and   TR    14 113 MDRT
                           wall cladding - Test methods
36 EN 1024:2012            Clay roofing tiles for discontinuous laying -               TR     9 113 MDRT
                           Determination of geometric characteristics
37 EN 13172:2012           Thermal insulation products - Evaluation of conformity      TR    34 113 MDRT

38 EN 14224:2010           Flexible sheets for waterproofing - Waterproofing of      NCT      7 113 MDRT
                           concrete bridge decks and other concrete surfaces
                           trafficable by vehicles - Determination of crack bridging
                           ability
39 EN 12003:2008           Adhesive for tiles - Determination of shear adhesion        NCT    5 114 MDRT
                           strength of reaction resin adhesives
40 EN 12003:2008/AC:2009   Adhesive for tiles - Determination of shear adhesion        NCT    1 114 MDRT
                           strength of reaction resin adhesives
41 EN 12808-1:2008         Grouts for tiles - Part 1: Determination of chemical        NCT    7 114 MDRT
                           resistance of reaction resin mortars
42 EN 12808-2:2008         Grouts for tiles - Part 2: Determination of resistance to   NCT    5 114 MDRT
                           abrasion
43 EN 12808-3:2008         Grouts for tiles - Part 3: Determination of flexural and    NCT    5 114 MDRT
                           compressive strength
44 EN 12808-5:2008         Grouts for tiles - Part 5: Determination of water           NCT    4 114 MDRT
                           absorption
45 EN ISO 12543-1:2011     Glass in building - Laminated glass and laminated           TR     7 122 MDRT
                           safety glass - Part 1: Definitions and description of
                           component parts (ISO 12543-1:2011)
46 EN ISO 12543-2:2011     Glass in building - Laminated glass and laminated           TR     7 122 MDRT
                           safety glass - Part 2: Laminated safety glass (ISO
                           12543-2:2011)
47 EN ISO 12543-3:2011              Glass in building - Laminated glass and laminated           TR      6 122 MDRT
                                    safety glass - Part 3: Laminated glass (ISO 12543-
                                    3:2011)
48 EN ISO 12543-4:2011              Glass in building - Laminated glass and laminated           TR      11 122 MDRT
                                    safety glass - Part 4: Test methods for durability (ISO
                                    12543-4:2011)
49 EN ISO 12543-5:2011              Glass in building - Laminated glass and laminated           TR      8 122 MDRT
                                    safety glass - Part 5: Dimensions and edge finishing
                                    (ISO 12543-5:2011)
50 EN ISO 12543-6:2011              Glass in building - Laminated glass and laminated           TR      5 122 MDRT
                                    safety glass - Part 6: Appearance (ISO 12543-6:2011)

51 EN ISO 12543-6:2011/AC:2012      Glass in building - Laminated glass and laminated           TR      1 122 MDRT
                                    safety glass - Part 6: Appearance - Technical
                                    Corrigendum 1 (ISO 12543-6:2011/Cor 1:2012)
52 EN 12758:2011                    Glass in building - Glazing and airborne sound              NCT     13 122 MDRT
                                    insulation - Product descriptions and determination of
                                    properties
53 EN 12898:2001                    Glass in building - Determination of the emissivity           FCT   10 122 MDRT
54 EN 15998:2010                    Glass in building - Safety in case of fire, fire resistance - NCT   13 122 MDRT
                                    Glass testing methodology for the purpose of
                                    classification
55 SR HD 60364-4-43:2011/C91:2012   Instalaţii electrice de joasă tensiune. Partea 4-43:        EL      2 136 MDRT
                                    Protecţie pentru asigurarea securităţii. Protecţie
                                    împotriva supracurenţilor
56 HD 60364-4-42:2011               Low voltage electrical installations -- Part 4-42:         NCT      40 136 MDRT
                                    Protection for safety - Protection against thermal effects

57 HD 60364-4-442:2012              Low-voltage electrical installations -- Part 4-442:       TR        11 136 MDRT
                                    Protection for safety - Protection of low-voltage
                                    installations against temporary overvoltages due to
                                    earth faults in the high-voltage system and due to faults
                                    in the low voltage system
58 HD 60364-4-444:2010              Low-voltage electrical installations -- Part 4-444:         NCT     32 136 MDRT
                                    Protection for safety - Protection against voltage
                                    disturbances and electromagnetic disturbances
59 HD 60364-5-51:2009               Electrical installations of buildings -- Part 5-51:         NCT     33 136 MDRT
                                    Selection and erection of electrical equipment -
                                    Common rules
60 HD 60364-5-52:2011               Low-voltage electrical installations -- Part 5-52:          NCT     91 136 MDRT
                                    Selection and erection of electrical equipment - Wiring
                                    systems
61 HD 60364-5-54:2011               Low-voltage electrical installations -- Part 5-54:          TR      44 136 MDRT
                                    Selection and erection of electrical equipment -
                                    Earthing arrangements and protective conductors
62 HD 60364-5-56:2010/A1:2011       Low-voltage electrical installations -- Part 5-56:          TR      2 136 MDRT
                                    Selection and erection of electrical equipment - Safety
                                    services
63 HD 60364-7-701:2007/A11:2011     Low-voltage electrical installations -- Part 7-701:         TR      2 136 MDRT
                                    Requirements for special installations or locations -
                                    Locations containing a bath or shower
64 HD 60364-7-701:2007/AC:2011      Low-voltage electrical installations -- Part 7-701:         TR      1 136 MDRT
                                    Requirements for special installations or locations -
                                    Locations containing a bath or shower
65 HD 60364-7-710:2012              Low-voltage electrical installations -- Part 7-710:         TR      40 136 MDRT
                                    Requirements for special installations or locations -
                                    Medical locations
66 HD 60364-7-729:2009              Low-voltage electrical installations -- Part 7-729:         NCT     10 136 MDRT
                                    Requirements for special installations or locations -
                                    Operating or maintenance gangways
67 EN 476:2011                      General requirements for components used in drains          NCT     21 186 MDRT
                                    and sewers
68 EN 1317-1:2010                   Road restraint systems - Part 1: Terminology and            NCT     24 187 MDRT
                                    general criteria for test methods
69 EN 1317-2:2010                Road restraint systems - Part 2: Performance classes,     NCT   20 187 MDRT
                                 impact test acceptance criteria and test methods for
                                 safety barriers including vehicle parapets

70 EN 1317-3:2010                Road restraint systems - Part 3: Performance classes,     NCT   17 187 MDRT
                                 impact test acceptance criteria and test methods for
                                 crash cushions
71 EN 1794-1:2011                Road traffic noise reducing devices - Non-acoustic        NCT   19 187 MDRT
                                 performance - Part 1: Mechanical performance and
                                 stability requirements
72 EN 1794-2:2011                Road traffic noise reducing devices - Non-acoustic     NCT      17 187 MDRT
                                 performance - Part 2: General safety and environmental
                                 requirements
73 EN 1824:2011                  Road marking materials - Road trials                     TR     23 187 MDRT
74 EN 1871:2000                  Road marking materials - Physical properties             FCT    32 187 MDRT
75 EN 12697-18:2004              Bituminous mixtures - Test methods for hot mix asphalt - FCT    10 187 MDRT
                                 Part 18: Binder drainage
76 EN 12697-5:2009/AC:2012       Bituminous mixtures - Test methods for hot mix asphalt - TR     1 187 MDRT
                                 Part 5: Determination of the maximum density

77 EN 12767:2007                 Passive safety of support structures for road equipment - NCT   25 187 MDRT
                                 Requirements, classification and test methods

78 EN 13197:2011                 Road marking materials - Wear simulator Turntable         TR    18 187 MDRT
79 EN 13286-43:2003              Unbound and hydraulically bound mixtures - Part 43:       FCT    8 187 MDRT
                                 Test method for the determination of the modulus of
                                 elasticity of hydraulically bound mixtures

80 EN 14227-1:2004               Hydraulically bound mixtures - Specifications - Part 1:   FCT   19 187 MDRT
                                 Cement bound granular mixtures
81 EN 14227-5:2004               Hydraulically bound mixtures - Specifications - Part 5:   FCT   18 187 MDRT
                                 Hydraulic road binder bound mixtures
82 EN 14389-1:2007               Road traffic noise reducing devices - Procedures for      NCT   6 187 MDRT
                                 assessing long term performance - Part 1: Acoustical
                                 characteristics
83 EN ISO 12944-6:1998           Paints and varnishes - Corrosion protection of steel      FCT   10 203 MDRT
                                 structures by protective paint systems - Part 6:
                                 Laboratory performance test methods (ISO 12944-
                                 6:1998)
84 EN ISO 12944-7:1998           Paints and varnishes - Corrosion protection of steel      FCT   9 203 MDRT
                                 structures by protective paint systems - Part 7:
                                 Execution and supervision of paint work (ISO 12944-
                                 7:1998)
85 ENV 13381-2:2002              Test methods for determining the contribution to the fire FCT   32 217 MDRT
                                 resistance of stuctural members - Part 2: Vertical
                                 protective membranes
86 ENV 13381-3:2002              Test methods for determining the contribution to the fire FCT   35 217 MDRT
                                 resistance of structural members - Part 3: Applied
                                 protection to concrete members
87 EN 12464-1:2011               Light and lighting - Lighting of work places - Part 1:    NCT   46 240 MDRT
                                 Indoor work places
88 EN ISO 10140-1:2010           Acoustics - Laboratory measurement of sound               NCT   33 276 MDRT
                                 insulation of building elements - Part 1: Application
                                 rules for specific products (ISO 10140-1:2010)
89 EN ISO 10140-5:2010           Acoustics - Laboratory measurement of sound               NCT   32 276 MDRT
                                 insulation of building elements - Part 5: Requirements
                                 for test facilities and equipment (ISO 10140-5:2010)

90 EN ISO 10077-2:2012           Thermal performance of windows, doors and shutters - NCT        23 281 MDRT
                                 Calculation of thermal transmittance - Part 2: Numerical
                                 method for frames (ISO 10077-2:2012)

91 EN ISO 10077-2:2012/AC:2012   Thermal performance of windows, doors and shutters - TR         2 281 MDRT
                                 Calculation of thermal transmittance - Part 2: Numerical
                                 method for frames - Technical Corrigendum 1 (ISO
                                 10077-2:2012/Cor 1:2012)
 92 EN ISO 12567-1:2010           Thermal performance of windows and doors -                   NCT   45 281 MDRT
                                  Determination of thermal transmittance by the hot-box
                                  method - Part 1: Complete windows and doors (ISO
                                  12567-1:2010)
 93 EN 13829:2000                 Thermal performance of buildings - Determination of air FCT        18 281 MDRT
                                  permeability of buildings - Fan pressurization method
                                  (ISO 9972:1996, modified)
 94 CEN/TR 14613:2003             Thermal performance of building materials and                TR    20 281 MDRT
                                  components - Principles for the determination of
                                  thermal properties of moist material and components

 95 CEN/TR 15131:2006             Thermal performance of building materials - The use of TR          12 281 MDRT
                                  interpolating equations in relation to thermal
                                  measurement on thick specimens - Guarded hot plate
                                  and heat flow meter apparatus
 96 CEN/TS 15548-1:2011           Thermal insulation products for building equipment and TR          25 281 MDRT
                                  industrial installations - Determination of thermal
                                  resistance by means of the guarded hot plate method -
                                  Part 1: Measurements at elevated temperatures from
                                  100 °C to 850 °C
 97 CEN/TR 15601:2012             Hygrothermal performance of buildings - Resistance to TR           11 281 MDRT
                                  wind - driven rain of roof coverings with discontinuously
                                  laid small elements - Test methods

 98 CEN/TR 15615:2008             Explanation of the general relationship between various TR         57 281 MDRT
                                  European standards and the Energy Performance of
                                  Buildings Directive (EPBD) - Umbrella Document

 99 EN ISO 15927-5:2004/A1:2011   Hygrothermal performance of buildings - Calculation   NCT          3 281 MDRT
                                  and presentation of climatic data - Part 5: Data for
                                  design heat load for space heating - Amendment 1 (ISO
                                  15927-5:2004/Amd 1:2011)
100 EN 16012:2012                 Thermal insulation for buildings - Reflective insulation     NCT   24 281 MDRT
                                  products - Determination of the declared thermal
                                  performance
101 EN ISO 23993:2010             Thermal insulation products for building equipment and NCT         22 281 MDRT
                                  industrial installations - Determination of design thermal
                                  conductivity (ISO 23993:2008, Corrected version 2009-
                                  10-01)
102 EN 253:2009                   District heating pipes - Preinsulated bonded pipe            NCT   37 302 MDRT
                                  systems for directly buried hot water networks - Pipe
                                  assembly of steel service pipe, polyurethane thermal
                                  insulation and outer casing of polyethylene


103 EN 442-2:1996/A1:2000         Radiators and convectors - Part 2: Test methods and          FCT   3 302 MDRT
                                  rating
104 EN 442-2:1996/A2:2003         Radiators and convectors - Part 2: Test Methods and          FCT   3 302 MDRT
                                  rating
105 EN 489:2009                   District heating pipes - Preinsulated bonded pipe            NCT   20 302 MDRT
                                  systems for directly buried hot water networks - Joint
                                  assembly for steel service pipes, polyurethane thermal
                                  insulation and outer casing of polyethylene


106 EN 779:2012                   Particulate air filters for general ventilation -            NCT   50 302 MDRT
                                  Determination of the filtration performance
107 EN 1264-1:2011                Water based surface embedded heating and cooling             NCT   15 302 MDRT
                                  systems - Part 1: Definitions and symbols
108 CR 1752:1998                  Ventilation for buildings - Design criteria for the indoor   FCT   55 302 MDRT
                                  environment
109 EN 1822-4:2009                High efficiency air filters (EPA, HEPA and ULPA) - Part      NCT   34 302 MDRT
                                  4: Determining leakage of filter elements (scan method)

110 EN 1822-5:2009                High efficiency air filters (EPA, HEPA and ULPA) - Part NCT        23 302 MDRT
                                  5: Determining the efficiency of filter elements
111 EN ISO 5801:2008          Industrial fans - Performance testing using standardized NCT      122 302 MDRT
                              airways (ISO 5801:2007 including Cor 1:2008)

112 EN ISO 5802:2008          Industrial fans - Performance testing in situ (ISO        NCT     64 302 MDRT
                              5802:2001)
113 EN ISO 12499:2008         Industrial fans - Mechanical safety of fans - Guarding    NCT     11 302 MDRT
                              (ISO 12499:1999)
114 EN 12792:2003             Ventilation for buildings - Symbols, terminology and      FCT     41 302 MDRT
                              graphical symbols
115 EN 12975-1:2006+A1:2010   Thermal solar systems and components - Solar              NCT     12 302 MDRT
                              collectors - Part 1: General requirements
116 EN 12977-1:2012           Thermal solar systems and components - Custom built       NCT     18 302 MDRT
                              systems - Part 1: General requirements for solar water
                              heaters and combisystems
117 EN 12977-2:2012           Thermal solar systems and components - Custom built       NCT     46 302 MDRT
                              systems - Part 2: Test methods for solar water heaters
                              and combisystems
118 EN 12977-3:2012           Thermal solar systems and components - Custom built       NCT     41 302 MDRT
                              systems - Part 3: Performance test methods for solar
                              water heater stores
119 EN 12977-4:2012           Thermal solar systems and components - Custom built       NCT     14 302 MDRT
                              systems - Part 4: Performance test methods for solar
                              combistores
120 EN 12977-5:2012           Thermal solar systems and components - Custom built       NCT     51 302 MDRT
                              systems - Part 5: Performance test methods for control
                              equipment
121 EN 13053:2006+A1:2011     Ventilation for buildings - Air handling units - Rating and NCT   42 302 MDRT
                              performance for units, components and sections

122 EN 13141-2:2010           Ventilation for buildings - Performance testing of        NCT     18 302 MDRT
                              components/products for residential ventilation - Part 2:
                              Exhaust and supply air terminal devices
123 EN 13141-4:2011           Ventilation for buildings - Performance testing of        NCT     11 302 MDRT
                              components/products for residential ventilation - Part 4:
                              Fans used in residential ventilation systems

124 EN 13141-7:2010           Ventilation for buildings - Performance testing of        NCT     26 302 MDRT
                              components/products for residential ventilation - Part 7:
                              Performance testing of a mechanical supply and
                              exhaust ventilation units (including heat recovery) for
                              mechanical ventilation systems intended for single
                              family dwellings
125 EN ISO 13349:2010         Fans - Vocabulary and definitions of categories (ISO      NCT     24 302 MDRT
                              13349:2010)
126 EN 13941:2009+A1:2010     Design and installation of preinsulated bonded pipe       NCT     87 302 MDRT
                              systems for district heating
127 EN 14419:2009             District heating pipes - Preinsulated bonded pipe         NCT     17 302 MDRT
                              systems for directly buried hot water networks -
                              Surveillance systems
128 CEN/TR 14788:2006         Ventilation for buildings - Design and dimensioning of   TR       55 302 MDRT
                              residential ventilation systems
129 EN 14799:2007             Air filters for general air cleaning - Terminology       NCT      12 302 MDRT
130 EN 15316-4-8:2011         Heating systems in buildings - Method for calculation of NCT      26 302 MDRT
                              system energy requirements and system efficiencies -
                              Part 4-8: Space heating generation systems, air heating
                              and overhead radiant heating systems


131 EN 1627:2011              Pedestrian doorsets, windows, curtain walling, grilles    NCT     18 318 MDRT
                              and shutters - Burglar resistance - Requirements and
                              classification
132 EN 1628:2011              Pedestrian doorsets, windows, curtain walling, grilles    NCT     23 318 MDRT
                              and shutters - Burglar resistance - Test method for the
                              determination of resistance under static loading
133 EN 1629:2011                   Pedestrian doorsets, windows, curtain walling, grilles       NCT   13 318 MDRT
                                   and shutters - Burglar resistance - Test method for the
                                   determination of resistance under dynamic loading

134 EN 1630:2011                   Pedestrian doorsets, windows, curtain walling, grilles  NCT        16 318 MDRT
                                   and shutters - Burglar resistance - Test method for the
                                   determination of resistance to manual burglary attempts

135 EN 12051:1999                  Building hardware - Door and window bolts -              FCT       15 318 MDRT
                                   Requirements and test methods
136 SR EN 206-1:2002/C92:2012      Beton. Partea 1: Specificaţie, performanţă, producţie şi EL         1 321 MDRT
                                   conformitate
137 EN 1090-2:2008+A1:2011         Execution of steel structures and aluminium structures - NCT       162 326 MDRT
                                   Part 2: Technical requirements for steel structures

138 EN 12512:2001                  Timber structures - Test methods - Cyclic testing of         FCT    7 326 MDRT
                                   joints made with mechanical fasteners
139 EN 12512:2001/A1:2005          Timber Structures - Test methods - Cyclic testing of         NCT    1 326 MDRT
                                   joints made with mechanical fasteners
140 EN 1990:2002/A1:2005/AC:2010   Eurocode - Basis of structural design                        NCT   14 343 MDRT
141 EN 1992-1-1:2004/AC:2010       Eurocode 2: Design of concrete structures - Part 1-1:        TR    13 343 MDRT
                                   General rules and rules for buildings
142 SR EN 1993-1-12:2007/NA:2012   Eurocod 3: Proiectarea structurilor de oţel. Partea 1-12:    EL     6 343 MDRT
                                   Reguli suplimentare pentru aplicarea prevederilor
                                   standardului EN 1993 la mărci de oţel până la S 700

143 SR EN 1993-1-6:2007/NA:2012    Eurocod 3. Proiectarea structurilor de oţel. Partea 1-6:     EL    10 343 MDRT
                                   Rezistenţa şi stabilitatea plăcilor curbe subţiri
144 SR EN 1993-1-7:2007/NA:2012    Eurocod 3: Proiectarea structurilor de oţel. Partea 1-7:     EL     6 343 MDRT
                                   Structuri din plăci plane solicitate la încărcări în afara
                                   planului
145 SR EN 1993-4-1:2007/NA:2012    Eurocod 3: Proiectarea structurilor de oţel. Partea 4-1:     EL    14 343 MDRT
                                   Silozuri
146 SR EN 1993-4-2:2007/NA:2012    Eurocod 3: Proiectarea structurilor de oţel. Partea 4-2:     EL     8 343 MDRT
                                   Rezervoare
147 SR EN 1993-4-3:2007/NA:2012    Eurocod 3: Proiectarea structurilor de oţel. Partea 4-3:     EL     8 343 MDRT
                                   Conducte
148 SR EN 1993-5:2007/NA:2012      Eurocod 3: Proiectarea structurilor de oţel. Partea 5:       EL     6 343 MDRT
                                   Piloţi şi palplanşe
149 SR EN 1993-6:2007/NA:2012      Eurocod 3: Proiectarea structurilor de oţel. Partea 6:       EL    14 343 MDRT
                                   Căi de rulare
150 SR EN 1996-1-2:2005/NA:2012    Eurocod 6: Proiectarea structurilor de zidărie. Partea 1-    EL    12 343 MDRT
                                   2: Reguli generale. Calculul structurilor la foc

151 EN 1996-1-2:2005/AC:2010       Eurocode 6 - Design of masonry structures - Part 1-2:        TR    29 343 MDRT
                                   General rules - Structural fire design
152 EN 1997-2:2007/AC:2010         Eurocode 7 - Geotechnical design - Part 2: Ground            NCT    5 343 MDRT
                                   investigation and testing
153 EN 1998-2:2005/A2:2011         Eurocode 8: Design of structures for earthquake              NCT    2 343 MDRT
                                   resistance - Part 2: Bridges
154 SR EN 1999-1-3:2007/NA:2012    Eurocod 9: Proiectarea structurilor de aluminiu. Partea      EL     8 343 MDRT
                                   1-3: Structuri care lucrează în regim de oboseală

155 SR EN 1999-1-4:2007/NA:2012    Eurocod 9: Proiectarea structurilor de aluminiu. Partea      EL     6 343 MDRT
                                   1-4: Structuri din table formate la rece
156 EN 1999-1-3:2007/A1:2011       Eurocode 9: Design of aluminium structures - Part 1-3:       NCT   17 343 MDRT
                                   Structures susceptible to fatigue
157 EN 1999-1-4:2007/A1:2011       Eurocode 9: Design of aluminium structures - Part 1-4:       NCT    2 343 MDRT
                                   Cold-formed structural sheeting
158 EN 1536:2010                   Execution of special geotechnical work - Bored piles         NCT   64 361 MDRT

159 EN 1538:2010                   Execution of special geotechnical work - Diaphragm           NCT   45 361 MDRT
                                   walls
160 EN 14490:2010                  Execution of special geotechnical works - Soil nailing       NCT   56 361 MDRT
161 EN 15237:2007               Execution of special geotechnical works - Vertical          NCT   53 361 MDRT
                                drainage
162 EN ISO 11058:2010           Geotextiles and geotextile-related products -               NCT   12 364 MDRT
                                Determination of water permeability characteristics
                                normal to the plane, without load (ISO 11058:2010)

163 EN 12225:2000               Geotextiles and geotextile-related products - Method for FCT       6 364 MDRT
                                determining the microbiological resistance by a soil
                                burial test
164 EN ISO 12956:2010           Geotextiles and geotextile-related products -               NCT    9 364 MDRT
                                Determination of the characteristic opening size (ISO
                                12956:2010)
165 CEN/CLC Guide 17:2010       Guidance for writing standards taking into account          TR    12   0 MECMA
                                micro, small and medium-sized enterprises (SMEs)
                                needs
166 CLC/TR 60034-16-2:2004      Rotating electrical machines -- Part 16-2: Excitation       TR    27   1 MECMA
                                systems for synchronous machines - Models for power
                                system studies
167 CLC/TR 60034-16-3:2004      Rotating electrical machines -- Part 16-3: Excitation       TR    14   1 MECMA
                                systems for synchronous machines - Dynamic
                                performance
168 CLC/TS 60034-17:2004        Rotating electrical machines -- Part 17: Cage induction     TR    18   1 MECMA
                                motors when fed from converters - Application guide

169 CLC/TS 60034-18-34:2004     Rotating electrical machines -- Part 18-34: Functional TR         15   1 MECMA
                                evaluation of insulation systems - Test procedures for
                                form-wound windings - Evaluation of thermomechanical
                                endurance of insulation systems


170 EN 60034-16-1:2011          Rotating electrical machines -- Part 16-1: Excitation       NCT   11   1 MECMA
                                systems for synchronous machines - Definitions

171 CLC/TR 60778:2004           Brush-holders for slip-rings group R - Type RA          TR         9   1 MECMA
172 EN 61355-1:2008             Classification and designation of documents for plants, NCT       33   2 MECMA
                                systems and equipment -- Part 1: Rules and
                                classification tables
173 SR EN 60137:2008/C91:2012   Treceri izolate pentru tensiuni alternative mai mari de     EL     2   15 MECMA
                                1000 V
174 SR EN 62217:2006/C91:2012   Izolatoare polimerice de interior şi de exterior cu         EL     2   15 MECMA
                                tensiunea nominală mai mare de 1000 V. Definiţii
                                generale, metode de încercare şi criterii de acceptare

175 EN 60747-5-1:2001/A1:2002   Discrete semiconductor devices and integrated circuits - FCT       3   17 MECMA
                                - Part 5-1: Optoelectronic devices - General

176 EN 60747-5-1:2001/A2:2002   Discrete semiconductor devices and integrated circuits - FCT       6   17 MECMA
                                - Part 5-1: Optoelectronic devices - General

177 EN 60747-5-2:2001/A1:2002   Discrete semiconductor devices and integrated circuits - FCT      10   17 MECMA
                                - Part 5-2: Optoelectronic devices - Essential ratings
                                and characteristics
178 EN 60747-5-3:2001/A1:2002   Discrete semiconductor devices and integrated circuits - FCT       9   17 MECMA
                                - Part 5-3: Optoelectronic devices - Measuring methods

179 EN 61747-1:1999             Liquid crystal and solid-state display devices -- Part 1:   FCT   29   17 MECMA
                                Generic specification
180 EN 61747-1:1999/A1:2003     Liquid crystal and solid-state display devices -- Part 1:   FCT    9   17 MECMA
                                Generic specification
181 EN 61747-2:1999             Liquid crystal and solid-state display devices -- Part 2:   FCT   13   17 MECMA
                                Liquid crystal display modules - Sectional specification

182 EN 61747-2-1:2001           Liquid crystal and solid-state display devices -- Part 2-1: FCT    8   17 MECMA
                                Passive matrix monochrome LCD modules - Blank
                                detail specification
183 EN 61747-2-2:2004           Liquid crystal display devices -- Part 2-2: Matrix colour   NCT   11   17 MECMA
                                LCD modules - Blank detail specification
184 EN 61747-3:2006               Liquid crystal display devices -- Part 3: Liquid crystal     NCT   14   17 MECMA
                                  display (LCD) cells - Sectional specification

185 EN 61747-3-1:2006             Liquid crystal display devices -- Part 3-1: Liquid crystal   NCT    9   17 MECMA
                                  display (LCD) cells - Blank detail specification

186 EN 61747-4-1:2004             Liquid crystal display devices -- Part 4-1: Matrix colour    NCT    7   17 MECMA
                                  LCD modules - Essential ratings and characteristics

187 EN 61747-5-3:2010             Liquid crystal display devices -- Part 5-3:                  NCT   16   17 MECMA
                                  Environmental, endurance and mechanical test
                                  methods - Glass strength and reliability
188 EN 60068-2-11:1999            Environmental testing -- Part 2: Tests - Test Ka: Salt       FCT    8   19 MECMA
                                  mist
189 EN 60068-2-30:2005            Environmental testing -- Part 2-30: Tests - Test Db:         NCT   10   19 MECMA
                                  Damp heat, cyclic (12 h + 12 h cycle)
190 EN 60068-2-78:2001            Environmental testing -- Part 2-78: Tests - Test Cab:        FCT    8   19 MECMA
                                  Damp heat, steady state
191 EN 60721-3-3:1995/A2:1997     Classification of environmental conditions -- Part 3:        FCT    6   19 MECMA
                                  Classification of groups of environmental parameters
                                  and their severities -- Section 3: Stationary use at
                                  weatherprotected locations
192 EN 60721-3-4:1995/A1:1997     Classification of environmental conditions -- Part 3:        FCT    5   19 MECMA
                                  Classification of groups of environmental parameters
                                  and their severities -- Section 4: Stationary use at non-
                                  weatherprotected locations
193 EN 60721-3-6:1993/A2:1997     Classification of environmental conditions -- Part 3:        FCT    4   19 MECMA
                                  Classification of groups of environmental parameters
                                  and their severities -- Section 6: Ship environment

194 EN 60721-3-7:1995/A1:1997     Classification of environmental conditions -- Part 3:        FCT    4   19 MECMA
                                  Classification of groups of environmental parameters
                                  and their severities -- Section 7: Portable and non-
                                  stationary use
195 EN ISO 19439:2006/AC:2007     Enterprise integration - Framework for enterprise            NCT    1   23 MECMA
                                  modelling (ISO 19439:2006/Cor 1:2006)
196 EN 60268-5:2003/A1:2009       Sound system equipment -- Part 5: Loudspeakers               NCT    4   26 MECMA
197 SR EN 60645-5:2005/C91:2012   Electroacoustics - Audiometric equipment -- Part 5:          EL     2   26 MECMA
                                  Instruments for the measurement of aural acoustic
                                  impedance/admittance
198 EN 50131-1:2006/A1:2009       Alarm systems - Intrusion and hold-up systems -- Part        NCT    9   27 MECMA
                                  1: System requirements
199 EN 50131-1:2006/IS2:2010      Alarm systems - Intrusion and hold-up systems -- Part        TR    21   27 MECMA
                                  1: System requirements
200 EN 50132-1:2010               Alarm systems - CCTV surveillance systems for use in         NCT   35   27 MECMA
                                  security applications -- Part 1: System requirements

201 CLC/TR 50456:2008             Alarm systems - Guidelines to achieving compliance           TR     8   27 MECMA
                                  with EC directives for equipment of alarm systems

202 EN 50518-1:2010               Monitoring and alarm receiving centre -- Part 1:             NCT   16   27 MECMA
                                  Location and construction requirements
203 EN 50518-2:2010               Monitoring and alarm receiving centre -- Part 2:             NCT    8   27 MECMA
                                  Technical requirements
204 EN 50518-2:2010/AC:2011       Monitoring and alarm receiving centre -- Part 2:             TR     1   27 MECMA
                                  Technical requirements
205 EN 50518-3:2011               Monitoring and alarm receiving centre -- Part 3:             NCT    7   27 MECMA
                                  Procedures and requirements for operation
206 CLC/TR 50531:2009             Alarm systems - Terms and definitions                        TR    55   27 MECMA
207 EN 60904-5:2011               Photovoltaic devices -- Part 5: Determination of the         NCT   11   35 MECMA
                                  equivalent cell temperature (ECT) of photovoltaic (PV)
                                  devices by the open-circuit voltage method
208 EN ISO 544:2011              Welding consumables - Technical delivery conditions       NCT      8   39 MECMA
                                 for filler materials and fluxes - Type of product,
                                 dimensions, tolerances and markings (ISO 544:2011)

209 EN 1011-2:2001/A1:2003       Welding - Recommendations for welding of metallic         FCT      1   39 MECMA
                                 materials - Part 2: Arc welding of ferritic steels

210 EN 1011-3:2000/A1:2003       Welding - Recommendations for welding of metallic         FCT      1   39 MECMA
                                 materials - Part 3: Arc welding of stainless steels

211 EN 1011-4:2000/A1:2003       Welding - Recommendations for welding of metallic         FCT      1   39 MECMA
                                 materials - Part 4: Arc welding of aluminium and
                                 aluminium alloys
212 EN 1011-6:2005               Welding - Recommendation for welding of metallic         FCT      40   39 MECMA
                                 materials - Part 6: Laser beam welding
213 EN 1598:2011                 Health and safety in welding and allied processes -      TR        6   39 MECMA
                                 Transparent welding curtains, strips and screens for arc
                                 welding processes
214 EN 1708-3:2012               Welding - Basic weld joint details in steel - Part 3: Clad, TR     9   39 MECMA
                                 buttered and lined pressurized components
215 EN ISO 4136:2011             Destructive tests on welds in metallic materials -          NCT    7   39 MECMA
                                 Transverse tensile test (ISO 4136:2001)
216 EN ISO 5173:2010/A1:2011     Destructive tests on welds in metallic materials - Bend TR         2   39 MECMA
                                 tests - Amendment 1 (ISO 5173:2009/Amd 1:2011)

217 EN ISO 6520-2:2001           Welding and allied processes - Classification of          FCT     15   39 MECMA
                                 geometric imperfections in metallic materials - Part 2:
                                 Welding with pressure (ISO 6520-2:2001)
218 EN ISO 9012:2011             Gas welding equipment - Air-aspirated hand blowpipes - TR         11   39 MECMA
                                 Specifications and tests (ISO 9012:2008)

219 EN ISO 9013:2002             Thermal cutting - Classification of thermal cuts -        FCT     18   39 MECMA
                                 Geometrical product specification and quality
                                 tolerances (ISO 9013:2002)
220 EN ISO 9013:2002/A1:2003     Thermal cutting - Classification of thermal cuts -        FCT      1   39 MECMA
                                 Geometrical product specification and quality
                                 tolerances (ISO 9013:2003)
221 EN ISO 9015-1:2011           Destructive tests on welds in metallic materials -     NCT         8   39 MECMA
                                 Hardness testing - Part 1: Hardness test on arc welded
                                 joints (ISO 9015-1:2001)
222 EN ISO 9015-2:2011           Destructive tests on welds in metallic materials -        NCT      7   39 MECMA
                                 Hardness testing - Part 2: Microhardness testing of
                                 welded joints (ISO 9015-2:2003)
223 EN ISO 9018:2003             Destructive tests on welds in metallic materials -        FCT      6   39 MECMA
                                 Tensile test on cruciform and lapped joints (ISO
                                 9018:2003)
224 EN ISO 9692-3:2001/A1:2003   Welding and allied processes - Recommendations for        FCT      1   39 MECMA
                                 joint preparation - Part 3: Metal inert gas welding and
                                 tungsten inert gas welding of aluminium and its alloys

225 EN ISO 9692-4:2003           Welding and allied processes - Recommendations for FCT             4   39 MECMA
                                 joint preparation - Part 4: Clad steels (ISO 9692-4:2003)

226 EN 12074:2000                Welding consumables - Quality requirements for          FCT       10   39 MECMA
                                 manufacture, supply and distribution of consumables for
                                 welding and allied processes
227 EN 12584:1999                Imperfections in oxyfuel flame cuts, laser beams cuts     FCT      7   39 MECMA
                                 and plasma cuts - Terminology
228 EN ISO 12690:2010            Metallic and other inorganic coatings - Thermal spray     NCT     11   39 MECMA
                                 coordination - Tasks and responsibilities (ISO
                                 12690:2010)
229 EN 14324:2004                Brazing - Guidance on the application of brazed joints    FCT     32   39 MECMA

230 CEN/TR 15135:2005            Welding - Design and non-destructive testing of welds     TR       4   39 MECMA
231 CEN/TR 15235:2005           Welding - Methods for assessing imperfections in          TR      13   39 MECMA
                                metallic structures
232 EN ISO 15609-3:2004         Specification and qualification of welding procedures for FCT      6   39 MECMA
                                metallic materials - Welding procedures specification -
                                Part 3: Electron beam welding (ISO 15609-3:2004)

233 EN ISO 15609-4:2009         Specification and qualification of welding procedures for NCT     10   39 MECMA
                                metallic materials - Welding procedure specification -
                                Part 4: Laser beam welding (ISO 15609-4:2009)

234 EN ISO 15609-5:2011         Specification and qualification of welding procedures for TR       9   39 MECMA
                                metallic materials - Welding procedure specification -
                                Part 5: Resistance welding (ISO 15609-5:2011,
                                Corrected version 2011-12-01)


235 EN ISO 15614-10:2005        Specification and qualification of welding procedures for NCT     10   39 MECMA
                                metallic materials - Welding procedure test - Part 10:
                                Hyperbaric dry welding (ISO 15614-10:2005)

236 EN ISO 15614-13:2012        Specification and qualification of welding procedures for TR      13   39 MECMA
                                metallic materials - Welding procedure test - Part 13:
                                Upset (resistance butt) and flash welding (ISO 15614-
                                13:2012)
237 EN ISO 17637:2011           Non-destructive testing of welds - Visual testing of       NCT     8   39 MECMA
                                fusion-welded joints (ISO 17637:2003)
238 EN ISO 17654:2011           Resistance welding - Destructive tests of welds -          TR      5   39 MECMA
                                Pressure test of resistance seam welds (ISO
                                17654:2011)
239 EN ISO 17662:2005           Welding - Calibration, verification and validation of      NCT    33   39 MECMA
                                equipment used for welding, including ancillary
                                activities (ISO 17662:2005)
240 EN ISO 17677-1:2009         Resistance welding - Vocabulary - Part 1: Spot,            NCT    14   39 MECMA
                                projection and seam welding (ISO 17677-1:2009)
241 EN ISO 26304:2011           Welding consumables - Solid wire electrodes, tubular       NCT    22   39 MECMA
                                cored electrodes and electrode-flux combinations for
                                submerged arc welding of high strength steels -
                                Classification (ISO 26304:2011)
242 EN 14127:2011               Non-destructive testing - Ultrasonic thickness             NCT    25   40 MECMA
                                measurement
243 CEN/TR 14748:2004           Non-destructive testing - Methodology for qualification    TR     14   40 MECMA
                                of non-destructive tests
244 CEN/TS 15053:2005           Non-destructive testing - Recommendations for              TR      8   40 MECMA
                                discontinuities-types in test specimens for examination

245 CEN/TR 15589:2007           Non destructive testing - Code of practice for the         TR      6   40 MECMA
                                approval of NDT personnel by recognised third party
                                organisations under the provisions of Directive
                                97/23/EC
246 CEN/TR 16332:2012           Non-destructive testing - Interpretation of EN ISO/IEC     TR     16   40 MECMA
                                17024 for NDT personnel certification application

247 CEN ISO/TR 25108:2006       Non-destructive testing - Guidelines for NDT personnel TR          9   40 MECMA
                                training organizations (ISO/TR 25108:2006)

248 EN 10131:2006               Cold rolled uncoated and zinc or zinc-nickel               NCT     9   42 MECMA
                                electrolytically coated low carbon and high yield
                                strength steel flat products for cold forming - Tolerances
                                on dimensions and shape
249 EN 10152:2009/AC:2011       Electrolytically zinc coated cold rolled steel flat products TR    1   42 MECMA
                                for cold forming - Technical delivery conditions

250 SR EN 10225:2009/C91:2012   Oţeluri de construcţii sudabile destinate platformelor     EL      1   42 MECMA
                                marine fixe. Condiţii tehnice de livrare
251 EN ISO 2738:1999      Sintered metal materials, excluding hardmetals -            FCT    9   46 MECMA
                          Permeable sintered metal materials - Determination of
                          density, oil content and open porosity (ISO 2738:1999)

252 EN ISO 7625:2010      Sintered metal materials, excluding hardmetals -            NCT    5   46 MECMA
                          Preparation of samples for chemical analysis for
                          determination of carbon content (ISO 7625:2006)
253 EN ISO 6433:2012      Technical product documentation - Part references (ISO TR          5   55 MECMA
                          6433:2012)
254 EN ISO 15378:2011     Primary packaging materials for medicinal products -   TR         72   56 MECMA
                          Particular requirements for the application of ISO
                          9001:2008, with reference to Good Manufacturing
                          Practice (GMP) (ISO 15378:2011)


255 EN ISO 3040:2012      Geometrical product specifications (GPS) -           TR            6   58 MECMA
                          Dimensioning and tolerancing - Cones (ISO 3040:2009)

256 EN 1176-4:2008        Playground equipment and surfacing - Part 4: Additional NCT        8   66 MECMA
                          specific safety requirements and test methods for
                          cableways
257 EN 1176-7:2008        Playground equipment and surfacing - Part 7: Guidance NCT          7   66 MECMA
                          on installation, inspection, maintenance and operation

258 EN ISO 252:2007       Conveyor belts - Adhesion between constitutive              NCT    6   84 MECMA
                          elements - Test methods (ISO 252:2007)
259 EN ISO 340:2004       Conveyor belts - Laboratory scale flammability              FCT    7   84 MECMA
                          characteristics - Requirements and test method (ISO
                          340:2004)
260 EN ISO 505:1999       Conveyor belts - Method for the determination of the        FCT   12   84 MECMA
                          tear propagation resistance of textile conveyor belts
                          (ISO 505:1999)
261 EN ISO 703:2007       Conveyor belts - Transverse flexibility (troughability) -   NCT    5   84 MECMA
                          Test method (ISO 703:2007)
262 EN ISO 7590:2009      Steel cord conveyor belts - Methods for the                 NCT    6   84 MECMA
                          determination of total thickness and cover thickness
                          (ISO 7590:2009)
263 EN ISO 7623:1997      Steel cord conveyor belts - Cord-to-coating bond test -     FCT    5   84 MECMA
                          Initial test and after thermal treatment (ISO 7623:1996)

264 EN ISO 9856:2003      Conveyor belts - Determination of elastic and               FCT    6   84 MECMA
                          permanent elongation and calculation of elastic
                          modulus (ISO 9856:2003)
265 EN 13827:2003         Steel cord conveyor belts - Determination of the lateral FCT       4   84 MECMA
                          and vertical displacement of steel cords
266 EN ISO 15147:1999     Light conveyor belts - Tolerances on widths and lengths FCT        9   84 MECMA
                          of cut light conveyor belts (ISO 15147:1999)

267 EN ISO 15236-2:2004   Steel cord conveyor belts - Part 2: Preferred belt types FCT       6   84 MECMA
                          (ISO 15236-2:2004)
268 EN ISO 15236-4:2004   Steel cord conveyor belts - Part 4: Vulcanized belt joints FCT     5   84 MECMA
                          (ISO 15236-4:2004)
269 EN ISO 16851:2004     Textile conveyor belts - Determination of the net length FCT       5   84 MECMA
                          of an endless (spliced) conveyor belt (ISO 16851:2004)

270 EN 28094:1994         Steel cord conveyor belts - Adhesion strength test of       FCT    3   84 MECMA
                          the cover to the core layer (ISO 8094:1984)

271 EN 558:2008+A1:2011   Industrial valves - Face-to-face and centre-to-face         TR    12   89 MECMA
                          dimensions of metal valves for use in flanged pipe
                          systems - PN and Class designated valves

272 EN 736-3:2008         Valves - Terminology - Part 3: Definition of terms       NCT       6   89 MECMA
273 EN 1333:2006          Flanges and their joints - Pipework components -         NCT       2   89 MECMA
                          Definition and selection of PN
274 EN 1503-1:2000        Valves - Materials for bodies, bonnets and covers - Part FCT       5   89 MECMA
                          1: Steels specified in European Standards
275 EN 1503-2:2000           Valves - Materials for bodies, bonnets and covers - Part FCT       8   89 MECMA
                             2: Steels other than those specified in European
                             Standards
276 EN 1503-3:2000           Valves - Materials for bodies, bonnets and covers - Part FCT       3   89 MECMA
                             3: Cast irons specified in European Standards

277 EN 1503-3:2000/AC:2001   Valves - Materials for bodies, bonnets and covers - Part FCT       1   89 MECMA
                             3: Cast irons specified in European Standards

278 EN 1503-4:2002           Valves - Materials for bodies, bonnets and covers - Part FCT       3   89 MECMA
                             4: Copper alloys specified in European Standards

279 EN 1515-1:1999           Flanges and their joints - Bolting - Part 1: Selection of   FCT    7   89 MECMA
                             bolting
280 EN ISO 5211:2001         Industrial valves - Part-turn actuator attachments (ISO     FCT   13   89 MECMA
                             5211:2001)
281 EN 12351:2010            Industrial valves - Protective caps for valves with         NCT    3   89 MECMA
                             flanged connections
282 EN 12570:2000            Industrial valves - Method for sizing the operating         FCT    6   89 MECMA
                             element
283 EN 12627:1999            Industrial valves - Butt welding ends for steel valves      FCT    9   89 MECMA

284 EN 12760:1999            Valves - Socket welding ends for steel valves               FCT    4   89 MECMA
285 EN 12982:2009            Industrial valves - End-to-end and centre-to-end            NCT    9   89 MECMA
                             dimensions for butt welding end valves
286 EN 14772:2005            Flanges and their joints - Quality assurance inspection     FCT   10   89 MECMA
                             and testing of gaskets in accordance with the series of
                             standards EN 1514 and EN 12560

287 EN 28659:1990            Thermoplastics valves - Fatigue strength - Test method FCT         3   89 MECMA
                             (ISO 8659:1989)
288 EN ISO 2307:2010         Fibre ropes - Determination of certain physical and     NCT       14 103 MECMA
                             mechanical properties (ISO 2307:2010)
289 EN ISO 14184-1:2011      Textiles - Determination of formaldehyde - Part 1: Free TR         9 103 MECMA
                             and hydrolysed formaldehyde (water extraction method)
                             (ISO 14184-1:2011)
290 EN ISO 14184-2:2011      Textiles - Determination of formaldehyde - Part 2:          TR    11 103 MECMA
                             Released formaldehyde (vapour absorption method)
                             (ISO 14184-2:2011)
291 EN 1482-1:2007           Fertilizers and liming materials - Sampling and sample      NCT   36 105 MECMA
                             preparation - Part 1: Sampling
292 EN 1482-2:2007           Fertilizers and liming materials - Sampling and sample      NCT    9 105 MECMA
                             preparation - Part 2: Sample preparation
293 EN ISO 176:2005          Plastics - Determination of loss of plasticizers -          NCT    6 108 MECMA
                             Activated carbon method (ISO 176:2005)
294 EN ISO 527-1:2012        Plastics - Determination of tensile properties - Part 1:    TR    23 108 MECMA
                             General principles (ISO 527-1:2012)
295 EN ISO 527-2:2012        Plastics - Determination of tensile properties - Part 2:    TR    10 108 MECMA
                             Test conditions for moulding and extrusion plastics (ISO
                             527-2:2012)
296 EN ISO 877-1:2010        Plastics - Methods of exposure to solar radiation - Part NCT      20 108 MECMA
                             1: General guidance (ISO 877-1:2009)
297 EN ISO 877-2:2010        Plastics - Methods of exposure to solar radiation - Part NCT       8 108 MECMA
                             2: Direct weathering and exposure behind window glass
                             (ISO 877-2:2009)
298 EN ISO 877-3:2010        Plastics - Methods of exposure to solar radiation - Part    NCT   12 108 MECMA
                             3: Intensified weathering using concentrated solar
                             radiation (ISO 877-3:2009)
299 EN 1360:2005             Rubber and plastic hoses and hose assemblies for            NCT   13 108 MECMA
                             measured fuel dispensing systems - Specification

300 EN ISO 1628-3:2010       Plastics - Determination of the viscosity of polymers in    NCT    9 108 MECMA
                             dilute solution using capillary viscometers - Part 3:
                             Polyethylenes and polypropylenes (ISO 1628-3:2010)
301 EN ISO 2505:2005          Thermoplastics pipes - Longitudinal reversion - Test      NCT   6 108 MECMA
                              method and parameters (ISO 2505:2005)
302 EN ISO 5774:2008          Plastics hoses - Textile-reinforced types for             NCT   11 108 MECMA
                              compressed-air applications - Specification (ISO
                              5774:2006)
303 EN ISO 6802:2008          Rubber and plastics hoses and hose assemblies with        NCT   5 108 MECMA
                              wire reinforcements - Hydraulic impulse test with flexing
                              (ISO 6802:2005)
304 EN ISO 7326:2008          Rubber and plastics hoses - Assessment of ozone           NCT   6 108 MECMA
                              resistance under static conditions (ISO 7326:2006)

305 EN ISO 11298-1:2011       Plastics piping systems for renovation of underground     NCT   15 108 MECMA
                              water supply networks - Part 1: General (ISO 11298-
                              1:2010)
306 EN 12115:2011             Rubber and thermoplastics hoses and hose assemblies NCT         22 108 MECMA
                              for liquid or gaseous chemicals - Specification

307 EN 12666-1:2005+A1:2011   Plastics piping systems for non-pressure underground      TR    22 108 MECMA
                              drainage and sewerage - Polyethylene (PE) - Part 1:
                              Specifications for pipes, fittings and the system

308 EN ISO 13229:2011         Thermoplastics piping systems for non-pressure            TR    5 108 MECMA
                              applications - Unplasticized poly(vinyl chloride) (PVC-U)
                              pipes and fittings - Determination of the viscosity
                              number and K-value (ISO 13229:2010)
309 EN ISO 22088-3:2006       Plastics - Determination of resistance to environmental   NCT   10 108 MECMA
                              stress cracking (ESC) - Part 3: Bent strip method (ISO
                              22088-3:2006)
310 EN 113:1996/A1:2004       Wood preservatives - Test method for determining the      FCT   1 118 MECMA
                              protective effectiveness against wood destroying
                              basidiomycetes - Determination of the toxic values

311 EN 320:2011               Particleboards and fibreboards - Determination of         NCT   4 118 MECMA
                              resistance to axial withdrawal of screws
312 EN 325:2012               Wood-based panels - Determination of dimensions of        TR    3 118 MECMA
                              test pieces
313 EN 581-3:2007             Outdoor furniture - Seating and tables for camping,       NCT   7 118 MECMA
                              domestic and contract use - Part 3: Mechanical safety
                              requirements and test methods for tables

314 EN 622-1:2003             Fibreboards - Specifications - Part 1: General            FCT   5 118 MECMA
                              requirements
315 EN 622-2:2004             Fibreboards - Specifications - Part 2: Requirements for   FCT   9 118 MECMA
                              hardboards
316 EN 622-2:2004/AC:2005     Fibreboards - Specifications - Part 2: Requirements for   FCT   1 118 MECMA
                              hardboards
317 EN 622-3:2004             Fibreboards - Specifications - Part 3: Requirements for   FCT   10 118 MECMA
                              medium boards
318 EN 12369-2:2011           Wood-based panels - Characteristic values for             NCT   10 118 MECMA
                              structural design - Part 2: Plywood
319 EN 12369-3:2008           Wood-based panels - Characteristic values for             NCT   6 118 MECMA
                              structural design - Part 3: Solid-wood panels
320 EN 13353:2008+A1:2011     Solid wood panels (SWP) - Requirements                    NCT   12 118 MECMA
321 EN 14727:2005             Laboratory furniture - Storage units for laboratories -   FCT   15 118 MECMA
                              Requirements and test methods
322 EN ISO 385:2005           Laboratory glassware - Burettes (ISO 385:2005)            NCT   11 119 MECMA
323 EN ISO 835:2007           Laboratory glassware - Graduated pipettes (ISO            NCT   11 119 MECMA
                              835:2007)
324 EN 1159-3:2003/AC:2008    Advanced technical ceramics - Ceramic composites,         NCT   1 119 MECMA
                              thermophysical properties - Part 3: Determination of
                              specific heat capacity
325 EN 50504:2008             Validation of arc welding equipment                       NCT   24 129 MECMA
326 EN 60974-4:2011           Arc welding equipment -- Part 4: Periodic inspection      NCT   14 129 MECMA
                              and testing
327 EN 45510-5-2:1998         Guide for procurement of power station equipment -        FCT   21 134 MECMA
                              Part 5-2: Gas turbines
328 EN 45510-5-4:1998         Guide for procurement of power station equipment -    FCT       21 134 MECMA
                              Part 5-4: Hydraulic turbines, storage pumps and pump-
                              turbines
329 EN 45510-6-1:1998         Guide for procurement of power station equipment -       FCT    18 134 MECMA
                              Part 6-1: Turbine auxiliaries - Deaerators

330 EN 45510-6-2:1998         Guide for procurement of power station equipment -       FCT    19 134 MECMA
                              Part 6-2: Turbine auxiliaries - Feedwater heaters

331 EN 45510-6-3:1998         Guide for procurement of power station equipment -       FCT    19 134 MECMA
                              Part 6-3: Turbine auxiliaries - Condenser plant

332 EN 45510-6-4:1999         Guide for procurement of power station equipment -       FCT    24 134 MECMA
                              Part 6-4: Turbine auxiliaries - Pumps
333 EN 45510-7-1:1999         Guide for procurement of power station plant,            FCT    20 134 MECMA
                              equipment, and systems - Part 7-1: Pipework and
                              valves - High pressure piping systems
334 EN 45510-7-2:1999         Guide for procurement of power station plant,            FCT    18 134 MECMA
                              equipment, and systems - Part 7-2: Pipework and
                              valves - Boiler and high pressure piping valves
335 EN 61025:2007             Fault tree analysis (FTA)                                NCT    48 144 MECMA
336 EN 62502:2010             Analysis techniques for dependability - Event tree       NCT    41 144 MECMA
                              analysis (ETA)
337 EN 61169-2:2007           Radio-frequency connectors -- Part 2: Sectional          NCT    15 145 MECMA
                              specification - Radio frequency coaxial connectors of
                              type 9,52
338 EN 61587-1:2012           Mechanical structures for electronic equipment - Tests   TR     20 145 MECMA
                              for IEC 60917 and IEC 60297 series -- Part 1:
                              Environmental requirements, test set-up and safety
                              aspects for cabinets, racks, subracks and chassis
                              under indoor conditions
339 EN 61587-2:2011           Mechanical structures for electronic equipment - Tests   TR     11 145 MECMA
                              for IEC 60917 and IEC 60297 -- Part 2: Seismic tests
                              for cabinets and racks
340 CEN/TR 13445-9:2011       Unfired pressure vessels - Part 9: Conformance of the    TR     15 152 MECMA
                              EN 13445 series to ISO 16528
341 CR 13445-7:2002           Unfired pressure vessels - Part 7: Guidance on the use   TR     15 152 MECMA
                              of the conformity procedures
342 EN ISO 8565:2011          Metals and alloys - Atmospheric corrosion testing -      NCT    10 157 MECMA
                              General requirements (ISO 8565:2011)
343 EN 12487:2007/AC:2008     Corrosion protection of metals - Rinsed and non-rinsed   NCT    1 157 MECMA
                              chromate conversion coatings on aluminium and
                              aluminium alloys
344 EN ISO 28706-1:2011       Vitreous and porcelain enamels - Determination of        NCT    10 157 MECMA
                              resistance to chemical corrosion - Part 1: Determination
                              of resistance to chemical corrosion by acids at room
                              temperature (ISO 28706-1:2008)
345 EN ISO 28706-2:2011       Vitreous and porcelain enamels - Determination of        NCT    16 157 MECMA
                              resistance to chemical corrosion - Part 2: Determination
                              of resistance to chemical corrosion by boiling acids,
                              boiling neutral liquids and/or their vapours (ISO 28706-
                              2:2008)
346 EN ISO 28722:2011         Vitreous and porcelain enamels - Characteristics of      NCT    7 157 MECMA
                              enamel coatings applied to steel panels intended for
                              architecture (ISO 28722:2008)
347 EN 60086-5:2011           Primary batteries -- Part 5: Safety of batteries with     NCT   30 161 MECMA
                              aqueous electrolyte
348 EN 61951-2:2011           Secondary cells and batteries containing alkaline or      NCT   28 161 MECMA
                              other non-acid electrolytes - Portable sealed
                              rechargeable single cells -- Part 2: Nickel-metal hydride

349 EN 50341-1:2001/A1:2009   Overhead electrical lines exceeding AC 45 kV -- Part 1: NCT     12 165 MECMA
                              General requirements - Common specifications

350 EN 61854:1998             Overhead lines - Requirements and tests for spacers      FCT    32 165 MECMA
351 EN 61897:1998              Overhead lines - Requirements and tests for                 FCT   22 165 MECMA
                               Stockbridge type aeolian vibration dampers
352 EN 13352:2012              Specification for the performance of automatic tank         TR    36 169 MECMA
                               contents gauges
353 EN 13617-4:2012            Petrol filling stations - Part 4: Safety requirements for   TR    11 169 MECMA
                               construction and performance of swivels for use on
                               metering pumps and dispensers
354 EN 14125:2004/A1:2006      Thermoplastic and flexible metal pipework for               NCT   2 169 MECMA
                               underground installation at petrol filling stations
355 EN 546-1:2006              Aluminium and aluminium alloys - Foil - Part 1:             NCT   8 170 MECMA
                               Technical conditions for inspection and delivery
356 EN 546-2:2006              Aluminium and aluminium alloys - Foil - Part 2:             NCT   5 170 MECMA
                               Mechanical properties
357 EN 546-3:2006              Aluminium and aluminium alloys - Foil - Part 3:             NCT   3 170 MECMA
                               Tolerances on dimensions
358 EN 546-4:2006              Aluminium and aluminium alloys - Foil - Part 4: Special     NCT   7 170 MECMA
                               property requirements
359 EN 683-1:2006              Aluminium and aluminium alloys - Finstock - Part 1:         NCT   7 170 MECMA
                               Technical conditions for inspection and delivery
360 EN 683-2:2006              Aluminium and aluminium alloys - Finstock - Part 2:         NCT   6 170 MECMA
                               Mechanical properties
361 EN 683-3:2006              Aluminium and aluminium alloys - Finstock - Part 3:         NCT   4 170 MECMA
                               Tolerances on dimensions and form
362 EN 1179:2003               Zinc an zinc alloys - Primary zinc                          NCT   4 171 MECMA
363 EN 14941:2006              Copper and copper alloys - Determination of cobalt          NCT   8 171 MECMA
                               content - FAAS method
364 EN 14942-2:2006            Copper and copper alloys - Determination of arsenic         NCT   8 171 MECMA
                               content - Part 2: FAAS method
365 EN 15622:2010              Copper and copper alloys - Determination of lead            NCT   9 171 MECMA
                               content - Flame atomic absorption spectrometric
                               method (FAAS)
366 EN 15915:2010              Copper and copper alloys - Determination of silver          NCT   13 171 MECMA
                               content - Flame atomic absorption spectrometric
                               method (FAAS)
367 EN 61400-11:2003/A1:2006   Wind turbine generator systems -- Part 11: Acoustic         NCT   5 174 MECMA
                               noise measurement techniques
368 EN ISO 4671:2007/A1:2011   Rubber and plastics hoses and hose assemblies -             TR    3 189 MECMA
                               Methods of measurement of the dimensions of hoses
                               and the lengths of hose assemblies - Amendment 1:
                               Clarification of position at which outside diameter is
                               measured (ISO 4671:2007/Amd 1:2011)


369 EN 26801:1993/A1:2011      Rubber or plastics hoses - Determination of volumetric      TR    2 189 MECMA
                               expansion - Amendment 1: Deletion of alcohol as
                               pressurizing fluid (ISO 6801:1983/Amd 1:2011)

370 EN ISO 6149-1:2007         Connections for hydraulic fluid power and general use - NCT       7 202 MECMA
                               Ports and stud ends with ISO 261 metric threads and O-
                               ring sealing - Part 1: Ports with truncated housing for O-
                               ring seal (ISO 6149-1:2007)


371 EN ISO 11127-1:2011        Preparation of steel substrates before application of       NCT   8 203 MECMA
                               paints and related products - Test methods for non-
                               metallic blast-cleaning abrasives - Part 1: Sampling
                               (ISO 11127-1:2011)
372 EN ISO 11127-2:2011        Preparation of steel substrates before application of     NCT     6 203 MECMA
                               paints and related products - Test methods for non-
                               metallic blast-cleaning abrasives - Part 2: Determination
                               of particle size distribution (ISO 11127-2:2011)


373 EN ISO 11127-3:2011        Preparation of steel substrates before application of     NCT     6 203 MECMA
                               paints and related products - Test methods for non-
                               metallic blast-cleaning abrasives - Part 3: Determination
                               of apparent density (ISO 11127-3:2011)
374 EN ISO 11127-4:2011             Preparation of steel substrates before application of       NCT   5 203 MECMA
                                    paints and related products - Test methods for non-
                                    metallic blast-cleaning abrasives - Part 4: Assessment
                                    of hardness by a glass slide test (ISO 11127-4:2011)


375 EN ISO 11127-5:2011             Preparation of steel substrates before application of     NCT     6 203 MECMA
                                    paints and related products - Test methods for non-
                                    metallic blast-cleaning abrasives - Part 5: Determination
                                    of moisture (ISO 11127-5:2011)
376 EN ISO 11127-6:2011             Preparation of steel substrates before application of     NCT     6 203 MECMA
                                    paints and related products - Test methods for non-
                                    metallic blast-cleaning abrasives - Part 6: Determination
                                    of water-soluble contaminants by conductivity
                                    measurement (ISO 11127-6:2011)
377 EN ISO 11127-7:2011             Preparation of steel substrates before application of     NCT     6 203 MECMA
                                    paints and related products - Test methods for non-
                                    metallic blast-cleaning abrasives - Part 7: Determination
                                    of water-soluble chlorides (ISO 11127-7:2011)


378 EN ISO 534:2011                 Paper and board - Determination of thickness, density TR          15 221 MECMA
                                    and specific volume (ISO 534:2011)
379 EN ISO 9706:1998                Information and documentation - Paper for documents - TR          7 221 MECMA
                                    Requirements for permanence (ISO 9706:1994)

380 EN 1089-3:2011                  Transportable gas cylinders - Gas cylinder identification NCT     8 231 MECMA
                                    (excluding LPG) - Part 3: Colour coding

381 EN 60335-2-                     Household and similar electrical appliances - Safety -- TR        1 239 MECMA
    7:2003/A11:2010/AC:2012         Part 2-7: Particular requirements for washing machines

382 EN 60836:2005                   Specifications for unused silicone insulating liquids for   NCT   11 264 MECMA
                                    electrotechnical purposes
383 EN 12642:2006                   Securing of cargo on road vehicles - Body structure of      NCT   14 270 MECMA
                                    commercial vehicles - Minimum requirements

384 EN 13044-1:2011                 Intermodal Loading Units - Marking - Part 1: Markings       NCT   6 270 MECMA
                                    for identification
385 EN 13044-2:2011                 Intermodal Loading Units - Marking - Part 2: Markings       NCT   7 270 MECMA
                                    of swap bodies related to rail operation
386 EN 13044-3:2011                 Intermodal Loading Units - Marking - Part 3: Markings       NCT   6 270 MECMA
                                    of semi-trailers related to rail operation
387 EN 13081:2008+A1:2012           Tanks for transport of dangerous goods - Service            TR    9 270 MECMA
                                    equipment for tanks - Vapour collection adaptor and
                                    coupler
388 EN 13082:2008+A1:2012           Tanks for transport of dangerous goods - Service            TR    8 270 MECMA
                                    equipment for tanks - Vapour transfer valve
389 EN 13094:2008                   Tanks for the transport of dangerous goods - Metallic       NCT   50 270 MECMA
                                    tanks with a working pressure not exceeding 0,5 bar -
                                    Design and construction
390 EN 13437:2003                   Packaging and material recycling - Criteria for recycling FCT     28 270 MECMA
                                    methods - Description of recycling processes and flow
                                    chart
391 EN 13439:2003                   Packaging - Rate of energy recovery - Definition and     FCT      5 270 MECMA
                                    method of calculation
392 EN 13440:2003                   Packaging - Rate of recycling - Definition and method of FCT      7 270 MECMA
                                    calculation
393 EN 13922:2011                   Tanks for transport of dangerous goods - Service         TR       16 270 MECMA
                                    equipment for tanks - Overfill prevention systems for
                                    liquid fuels
394 EN 14025:2008                   Tanks for the transport of dangerous goods - Metallic       NCT   45 270 MECMA
                                    pressure tanks - Design and Construction
395 EN 14182:2002                   Packaging - Terminology - Basic terms and definitions       FCT   8 270 MECMA

396 SR EN 30-1-1+A2:2011/C91:2012   Aparate de gătit casnice care utilizează combustibili       EL    1 305 MECMA
                                    gazoşi. Partea 1-1: Securitate. Generalităţi
397 EN 58:2012                     Bitumen and bituminous binders - Sampling bituminous TR            16 320 MECMA
                                   binders
398 EN 241:2000                    Liquid petroleum products - Determination of sodium  FCT            7 320 MECMA
                                   content - Atomic absorption spectrometric method

399 EN 589:2008+A1:2012            Automotive fuels - LPG - Requirements and test               TR     9 320 MECMA
                                   methods
400 EN 1428:2012                   Bitumen and bituminous binders - Determination of            TR     5 320 MECMA
                                   water content in bituminous emulsions - Azeotropic
                                   distillation method
401 EN ISO 3735:1999               Crude petroleum and fuel oils - Determination of        FCT         8 320 MECMA
                                   sediment - Extraction method (ISO 3735:1999)
402 EN 13131:2000                  Liquid petroleum products - Determination of nickel and FCT         7 320 MECMA
                                   vanadium content - Atomic absorption spectrometric
                                   method
403 EN 15492:2012                  Ethanol as a blending component for petrol -              TR        8 320 MECMA
                                   Determination of inorganic chloride and sulfate content -
                                   Ion chromatographic method
404 EN 15944:2010                  Liquid petroleum products - Determination of nickel and NCT         9 320 MECMA
                                   vanadium content - Inductively coupled plasma optical
                                   emission spectrometry method (ICP OES)

405 EN ISO 20846:2011              Petroleum products - Determination of sulfur content of NCT        15 320 MECMA
                                   automotive fuels - Ultraviolet fluorescence method (ISO
                                   20846:2011)
406 EN ISO 14064-1:2012            Greenhouse gases - Part 1: Specification with guidance TR          24 323 MECMA
                                   at the organization level for quantification and reporting
                                   of greenhouse gas emissions and removals (ISO 14064-
                                   1:2006)
407 EN ISO 14064-2:2012            Greenhouse gases - Part 2: Specification with guidance TR          38 323 MECMA
                                   at the project level for quantification, monitoring and
                                   reporting of greenhouse gas emission reductions or
                                   removal enhancements (ISO 14064-2:2006)


408 EN ISO 14064-3:2012            Greenhouse gases - Part 3: Specification with guidance TR          48 323 MECMA
                                   for the validation and verification of greenhouse gas
                                   assertions (ISO 14064-3:2006)
409 EN 301:2006                    Adhesives, phenolic and aminoplastic, for load-bearing NCT          6 338 MECMA
                                   timber structures - Classification and performance
                                   requirements
410 EN 542:2003                    Adhesives - Determination of density                         FCT    5 338 MECMA
411 EN ISO 9311-2:2011             Adhesives for thermoplastic piping systems - Part 2:         TR     6 338 MECMA
                                   Determination of shear strength (ISO 9311-2:2011)

412 SR EN ISO 6976:2005/C93:2012   Gaz natural. Calculul puterii calorifice, densităţii,     EL        1 357 MECMA
                                   densităţii relative şi indicelui Wobbe din compoziţie
413 EN ISO 12213-3:2009            Natural gas - Calculation of compression factor - Part 3: NCT      27 357 MECMA
                                   Calculation using physical properties (ISO 12213-
                                   3:2006)
414 EN 14961-1:2010                Solid biofuels - Fuel specifications and classes - Part 1:   NCT   40 360 MECMA
                                   General requirements
415 EN 14961-2:2011                Solid biofuels - Fuel specifications and classes - Part 2:   NCT   10 360 MECMA
                                   Wood pellets for non-industrial use
416 EN 15289:2011                  Solid biofuels - Determination of total content of sulfur    NCT   13 360 MECMA
                                   and chlorine
417   EN 15602:2008                Security service providers - Terminology                     NCT    6   373   MECMA
418   EN 16114:2011                Management consultancy services                              NCT   17   373   MECMA
419   EN 60268-5:2003              Sound system equipment -- Part 5: Loudspeakers               FCT   48   375   MECMA
420   CWA 15847:2008               Innovation, Coordination and Collaboration in Service        TR    54   379   MECTS
                                   Driven Manufacturing Supply Chains - Reference Model
                                   for Industrial Services
421 EN ISO 7779:2010               Acoustics - Measurement of airborne noise emitted by         NCT   48 274 MMFPS
                                   information technology and telecommunications
                                   equipment (ISO 7779:2010)
422 EN ISO 9612:2009               Acoustics - Determination of occupational noise              NCT   47 274 MMFPS
                                   exposure - Engineering method (ISO 9612:2009)
423 EN ISO 10523:2012       Water quality - Determination of pH (ISO 10523:2008)          TR     16   52 MMP

424 EN 1911:2010            Stationary source emissions - Determination of mass   NCT            36   53 MMP
                            concentration of gaseous chlorides expressed as HCl -
                            Standard reference method
425 EN 1948-4:2010          Stationary source emissions - Determination of the            NCT    52   53 MMP
                            mass concentration of PCDDs/PCDFs and dioxin-like
                            PCBs - Part 4: Sampling and analysis of dioxin-like
                            PCBs
426 EN ISO 11771:2010       Air quality - Determination of time-averaged mass             NCT    34   53 MMP
                            emissions and emission factors - General approach
                            (ISO 11771:2010)
427 EN 15841:2009           Ambient air quality - Standard method for determination NCT          27   53 MMP
                            of arsenic, cadmium, lead and nickel in atmospheric
                            deposition
428 EN 15852:2010           Ambient air quality - Standard method for the                 NCT    40   53 MMP
                            determination of total gaseous mercury
429 EN 15853:2010           Ambient air quality - Standard method for the                 NCT    29   53 MMP
                            determination of mercury deposition
430 EN ISO 21258:2010       Stationary source emissions - Determination of the            NCT    31   53 MMP
                            mass concentration of dinitrogen monoxide (N2O) -
                            Reference method: Non-dispersive infrared method
                            (ISO 21258:2010)
431 EN ISO 25139:2011       Stationary source emissions - Manual method for the           NCT    18   53 MMP
                            determination of the methane concentration using gas
                            chromatography (ISO 25139:2011)
432 EN ISO 25140:2010       Stationary source emissions - Automatic method for the NCT           30   53 MMP
                            determination of the methane concentration using flame
                            ionisation detection (FID) (ISO 25140:2010)

433 EN 15216:2007           Characterization of waste - Determination of total            NCT     4 360 MMP
                            dissolved solids (TDS) in water and eluates
434 EN 1865-1:2010          Patient handling equipment used in road ambulances -          NCT    22 377 MS
                            Part 1: General stretcher systems and patient handling
                            equipment
435 EN ISO 5832-3:2012      Implants for surgery - Metallic materials - Part 3:           TR      3 377 MS
                            Wrought titanium 6-aluminium 4-vanadium alloy (ISO
                            5832-3:1996)
436 EN ISO 6875:2011        Dentistry - Patient chair (ISO 6875:2011)                     NCT     10 377 MS
437 EN 16224:2012           Healthcare provision by chiropractors                         TR      33 377 MS
438 EN 50128:2011           Railway applications - Communication, signalling and          NCT    137   4 MTI
                            processing systems - Software for railway control and
                            protection systems
439 EN 50149:2001/AC:2011   Aplicaţii feroviare. Instalaţii fixe. Tracţiune electrică. Fire TR    1    4 MTI
                            de contact renurate de cupru şi aliaje de cupru

440 EN 50239:1999/AC:2012                                                                 TR      1    4 MTI
441 EN 50443:2011           Effects of electromagnetic interference on pipelines          TR     27    4 MTI
                            caused by high voltage a.c. electric traction systems
                            and/or high voltage a.c. power supply systems

442 EN 50526-1:2012         Railway applications - Fixed installations - D.C. surge       TR     37    4 MTI
                            arresters and voltage limiting devices -- Part 1: Surge
                            arresters
443 EN 61881-1:2011         Railway applications - Rolling stock equipment -          NCT        43    4 MTI
                            Capacitors for power electronics -- Part 1: Paper/plastic
                            film capacitors
444 EN 62267:2009           Railway applications - Automated urban guided                 NCT    72    4 MTI
                            transport (AUGT) - Safety requirements
445 EN 62290-2:2011         Railway applications - Urban guided transport                 NCT    68    4 MTI
                            management and command/control systems -- Part 2:
                            Functional requirements specification
446 EN 62520:2011           Railway applications - Electric traction - Short-primary      NCT    28    4 MTI
                            type linear induction motors (LIM) fed by power
                            converters
447 EN 12561-1:2011           Railway applications - Tank wagons - Part 1:                NCT   7 146 MTI
                              Identification plates for tank wagons for the carriage of
                              dangerous goods
448 EN 12561-2:2011           Railway applications - Tank wagons - Part 2: Bottom         NCT   7 146 MTI
                              emptying devices for liquid products including vapour
                              return
449 EN 12561-3:2011           Railway applications - Tank wagons - Part 3: Bottom         NCT   7 146 MTI
                              filling and emptying devices for gases liquefied under
                              pressure
450 EN 12561-4:2011           Railway applications - Tank wagons - Part 4: Devices        NCT   4 146 MTI
                              for top filling and emptying of liquid products

451 EN 12561-5:2011           Railway applications - Tank wagons - Part 5: Devices        NCT   4 146 MTI
                              for vapour return while filling or emptying of liquid
                              products
452 EN 12561-6:2011           Railway applications - Tank wagons - Part 6: Manholes NCT         6 146 MTI

453 EN 12561-7:2011           Railway applications - Tank wagons - Part 7: Platforms      NCT   6 146 MTI
                              and ladders
454 EN 12561-8:2011           Railway applications - Tank wagons - Part 8: Heating        NCT   4 146 MTI
                              connections
455 EN 13231-3:2012           Railway applications - Track - Acceptance of works -        NCT   27 146 MTI
                              Part 3: Acceptance of reprofiling rails in track

456 EN 13597:2003             Railway applications - Rubber suspension components - NCT         35 146 MTI
                              Rubber diaphragms for pneumatic suspension springs

457 EN 13848-3:2009           Railway applications - Track - Track geometry quality -     NCT   18 146 MTI
                              Part 3: Measuring systems - Track construction and
                              maintenance machines
458 EN 14033-2:2008+A1:2011   Railway applications - Track - Railbound construction       NCT   47 146 MTI
                              and maintenance machines - Part 2: Technical
                              requirements for working
459 EN 14730-1:2006+A1:2010   Railway applications - Track - Aluminothermic welding       NCT   28 146 MTI
                              of rails - Part 1: Approval of welding processes

460 EN 15273-1:2009           Railway applications - Gauges - Part 1: General -           NCT   98 146 MTI
                              Common rules for infrastructure and rolling stock
                                   SECTIUNEA 1, CAPITOLUL 2

           Standarde europene ce se adopta ca standarde române prin notă de
                                   confirmare (NC)

                                                                                                        Pa-
                                                                                               Metoda
                                                                                                        gini      Mini-
Nr crt           Indicativ EN                                Titlu                             adop-          CT
                                                                                                        eligi     ster
                                                                                                tare
                                                                                                        bile
    1 EN ISO 6498:2012             Animal feeding stuffs - Guidelines for sample preparation NC            50 95 MADR
                                   (ISO 6498:2012)
    2 EN ISO 6887-4:2003/A1:2011   Microbiology of food and animal feeding stuffs -            NC          3   95 MADR
                                   Preparation of test samples, initial suspension and
                                   decimal dilutions for microbiological examination - Part 4:
                                   Specific rules for the preparation of products other than
                                   milk and milk products, meat and meat products, and fish
                                   and fishery products (ISO 6887-4:2003/Amd 1:2011)


    3 EN ISO 8968-3:2007/AC:2012   Milk - Determination of nitrogen content - Part 3: Block-   ER          2   95 MADR
                                   digestion method (Semi-micro rapid routine method) -
                                   Technical Corrigendum 1 (ISO 8968-3:2004/Cor 1:2011)

    4 EN ISO 8968-4:2001/AC:2012   Milk - Determination of nitrogen content - Part 4:        ER            2   95 MADR
                                   Determination of non-protein-nitrogen content - Technical
                                   Corrigendum 1 (ISO 8968-4:2001/Cor 1:2011)

    5 EN ISO 14183:2008/AC:2012    Animal feeding stuffs - Determination of monensin,          ER          1   95 MADR
                                   narasin and salinomycin contents - Liquid
                                   chromatographic method using post-column
                                   derivatization - Technical Corrigendum 1 (ISO
                                   14183:2005/Cor 1:2010)
    6 EN 15621:2012                Animal feeding stuffs - Determination of calcium, sodium, NC           23   95 MADR
                                   phosphorus, magnesium, potassium, sulphur, iron, zinc,
                                   copper, manganese and cobalt after pressure digestion
                                   by ICP-AES
    7 EN 16006:2011                Animal feeding stuffs - Determination of the Sum of   NC               15   95 MADR
                                   Fumonisin B1 & B2 in compound animal feed with
                                   immunoaffinity clean-up and RP-HPLC with fluorescence
                                   detection after pre- or post-column derivatisation

    8 EN 16007:2011                Animal feeding stuffs - Determination of Ochratoxin A in NC            11   95 MADR
                                   animal feed by immunoaffinity column clean-up and High
                                   Performance Liquid Chromatography with fluorescence
                                   detection
    9 EN ISO 16140:2003/A1:2011    Microbiology of food and animal feeding stuffs - Protocol NC           14   95 MADR
                                   for the validation of alternative methods - Amendment 1
                                   (ISO 16140:2003/AMD 1:2011)
   10 EN 16155:2012                Foodstuffs - Determination of sucralose - High              NC          8   95 MADR
                                   performance liquid chromatographic method
   11 EN 16158:2012                Animal feeding stuffs - Determination of semduramicin       NC         19   95 MADR
                                   content - Liquid chromatographic method using a "tree"
                                   analytical approach
   12 EN 16159:2012                Animal feeding stuffs - Determination of selenium by   NC              16   95 MADR
                                   hydride generation atomic absorption spectrometry
                                   (HGAAS) after microwave digestion (digestion with 65 %
                                   nitric acid and 30 % hydrogen peroxide)
   13 EN 16160:2012                Animal feeding stuffs - Determination of Hydrocyanic acid NC           13   95 MADR
                                   by HPLC
   14 EN 16162:2012                Animal feeding stuffs - Determination of decoquinate by NC             16   95 MADR
                                   HPLC with fluorescence detection
15 EN 16204:2012               Foodstuffs - Determination of lipophilic algal toxins       NC   29   95 MADR
                               (okadaic acid group toxins, yessotoxins, azaspiracids,
                               pectenotoxins) in shellfish and shellfish products by LC-
                               MS/MS
16 EN 16206:2012               Animal feeding stuffs - Determination of arsenic by         NC   15   95 MADR
                               hydride generation atomic absorption spectrometry
                               (HGAAS) after microwave pressure digestion (digestion
                               with 65 % nitric acid and 30 % hydrogen peroxide)

17 EN 16215:2012               Animal feeding stuffs - Determination of dioxins and        NC   50   95 MADR
                               dioxin-like PCBs by GC/HRMS and of indicator PCBs by
                               GC/HRMS
18 EN 16277:2012               Animal feeding stuffs - Determination of mercury by cold- NC     15   95 MADR
                               vapour atomic absorption spectrometry (CVAAS) after
                               microwave pressure digestion (extraction with 65 % nitric
                               acid and 30 % hydrogen peroxide)

19 EN 16278:2012               Animal feeding stuffs - Determination of inorganic arsenic NC    12   95 MADR
                               by hydride generation atomic absorption spectrometry
                               (HG-AAS) after microwave extraction and separation by
                               solid phase extraction (SPE)
20 EN 16279:2012               Animal feeding stuffs - Determination of fluoride content   NC   13   95 MADR
                               after hydrochloric acid treatment by ion-sensitive
                               electrode method (ISE)
21 EN ISO 927:2009/AC:2012     Spices and condiments - Determination of extraneous         ER   1 180 MADR
                               matter and foreign matter content - Technical
                               Corrigendum 1 (ISO 927:2009/Cor 1:2012)
22 EN ISO 3961:2011            Animal and vegetable fats and oils - Determination of       NC   7 180 MADR
                               iodine value (ISO 3961:2009)
23 EN ISO 9936:2006/A1:2011    Animal and vegetable fats and oils - Determination of       NC   4 180 MADR
                               tocopherol and tocotrienol contents by high-performance
                               liquid chromatography - Amendment 1: Updating of
                               reagents and confirmation of statistical data validity (ISO
                               9936:2006/Amd 1:2011)
24 EN ISO 11746:2012           Rice - Determination of biometric characteristics of        NC   6 180 MADR
                               kernels (ISO 11746:2012)
25 EN ISO 15753:2006/A1:2011   Animal and vegetable fats and oils - Determination of       NC   3 180 MADR
                               polycyclic aromatic hydrocarbons - Amendment 1:
                               Exclusion of olive pomace oil from the scope (ISO
                               15753:2006/Amd 1:2011)
26 EN 15948:2012               Cereals - Determination of moisture and protein - Method NC      12 180 MADR
                               using Near-Infrared-Spectroscopy in whole kernels

27 EN ISO 17932:2011           Palm oil - Determination of the deterioration of            NC   9 180 MADR
                               bleachability index (DOBI) and carotene content (ISO
                               17932:2011)
28 EN ISO 12782-1:2012         Soil quality - Parameters for geochemical modelling of      NC   14 285 MADR
                               leaching and speciation of constituents in soils and
                               materials - Part 1: Extraction of amorphous iron oxides
                               and hydroxides with ascorbic acid (ISO 12782-1:2012)

29 EN ISO 12782-2:2012         Soil quality - Parameters for geochemical modelling of      NC   16 285 MADR
                               leaching and speciation of constituents in soils and
                               materials - Part 2: Extraction of crystalline iron oxides
                               and hydroxides with dithionite (ISO 12782-2:2012)

30 EN ISO 12782-3:2012         Soil quality - Parameters for geochemical modelling of      NC   15 285 MADR
                               leaching and speciation of constituents in soils and
                               materials - Part 3: Extraction of aluminium oxides and
                               hydroxides with ammonium oxalate/oxalic acid (ISO
                               12782-3:2012)
31 EN ISO 12782-4:2012        Soil quality - Parameters for geochemical modelling of       NC   24 285 MADR
                              leaching and speciation of constituents in soils and
                              materials - Part 4: Extraction of humic substances from
                              solid samples (ISO 12782-4:2012)
32 EN ISO 12782-5:2012        Soil quality - Parameters for geochemical modelling of       NC   20 285 MADR
                              leaching and speciation of constituents in soils and
                              materials - Part 5: Extraction of humic substances from
                              aqueous samples (ISO 12782-5:2012)

33 EN 13037:2011              Soil improvers and growing media - Determination of pH       NC   5 285 MADR

34 EN 13038:2011              Soil improvers and growing media - Determination of          NC   6 285 MADR
                              electrical conductivity
35 EN 13039:2011              Soil improvers and growing media - Determination of          NC   4 285 MADR
                              organic matter content and ash
36 EN 13041:2011              Soil improvers and growing media - Determination of          NC   16 285 MADR
                              physical properties - Dry bulk density, air volume, water
                              volume, shrinkage value and total pore space
37 EN 16086-1:2011            Soil improvers and growing media - Determination of          NC   20 285 MADR
                              plant response - Part 1: Pot growth test with Chinese
                              cabbage
38 EN 16086-2:2011            Soil improvers and growing media - Determination of      NC       11 285 MADR
                              plant response - Part 2: Petri dish test using cress
39 EN 16087-1:2011            Soil improvers and growing media - Determination of the NC        7 285 MADR
                              aerobic biological activity - Part 1: Oxygen uptake rate
                              (OUR)
40 EN 16087-2:2011            Soil improvers and growing media - Determination of the NC        4 285 MADR
                              aerobic biological activity - Part 2: Self heating test for
                              compost
41 CEN/TS 1187:2012           Test methods for external fire exposure to roofs             NC   43 217 MAI
42 EN 1363-1:2012             Fire resistance tests - Part 1: General Requirements         NC   49 217 MAI
43 EN 13381-6:2012            Test methods for determining the contribution to the fire    NC   20 217 MAI
                              resistance of structural members - Part 6: Applied
                              protection to concrete filled hollow steel columns

44 EN 15254-7:2012            Extended application of results from fire resistance tests - NC   19 217 MAI
                              Non-loadbearing ceilings - Part 7: Metal sandwich panel
                              construction
45 EN 15882-1:2011            Extended application of results from fire resistance tests   NC   18 217 MAI
                              for service installations - Part 1: Ducts
46 EN 15882-4:2012            Extended application of results from fire resistance tests   NC   8 217 MAI
                              for service installations - Part 4: Linear joint seals

47 EN 15759-1:2011            Conservation of cultural property - Indoor climate - Part 1: NC   25 380 MCPN
                              Guidelines for heating churches, chapels and other
                              places of worship
48 EN 15898:2011              Conservation of cultural property - Main general terms     NC     20 380 MCPN
                              and definitions
49 EN 15946:2011              Conservation of cultural property - Packing principles for NC     20 380 MCPN
                              transport
50 EN 300 113-2 v1.5.1:2011   Electromagnetic compatibility and Radio spectrum           NC     15   6 MCSI
                              Matters (ERM);Land mobile service;Radio equipment
                              intended for the transmission of data (and/or speech)
                              using constant or non-constant envelope modulation and
                              having an antenna connector;Part 2: Harmonized EN
                              covering the essential requirements of article 3.2 of the
                              R&TTE Directive
51 EN 300 220-2 v2.4.1:2012    Electromagnetic compatibility and Radio spectrum          NC   15   6 MCSI
                               Matters (ERM);Short Range Devices (SRD);Radio
                               equipment to be used in the 25 MHz to 1 000 MHz
                               frequency range with power levels ranging up to 500
                               mW;Part 2: Harmonized EN covering essential
                               requirements under article 3.2 of the R&TTE Directive


52 EN 300 328 v1.8.1:2012      Electromagnetic compatibility and Radio spectrum          NC   63   6 MCSI
                               Matters (ERM);Wideband transmission systems;Data
                               transmission equipment operating in the 2,4 GHz ISM
                               band and using wide band modulation
                               techniques;Harmonized EN covering the essential
                               requirements of article 3.2 of the R&TTE Directive


53 EN 300 386 v1.6.1:2012      Electromagnetic compatibility and Radio spectrum          NC   38   6 MCSI
                               Matters (ERM);Telecommunication network
                               equipment;ElectroMagnetic Compatibility (EMC)
                               requirements
54 EN 300 422-2 v1.3.1:2011    Electromagnetic compatibility and Radio spectrum       NC      14   6 MCSI
                               Matters (ERM);Wireless microphones in the 25 MHz to 3
                               GHz frequency range;Part 2: Harmonized EN covering
                               the essential requirements of article 3.2 of the R&TTE
                               Directive
55 EN 300 433-2 v1.3.1:2011    Electromagnetic compatibility and Radio spectrum        NC     12   6 MCSI
                               Matters (ERM);Citizens' Band (CB) radio equipment;Part
                               2: Harmonized EN covering the essential requirements of
                               article 3.2 of the R&TTE Directive

56 EN 300 676-2 v1.5.1:2011    Ground-based VHF hand-held, mobile and fixed radio        NC   13   6 MCSI
                               transmitters, receivers and transceivers for the VHF
                               aeronautical mobile service using amplitude
                               modulation;Part 2: Harmonized EN covering essential
                               requirements of article 3.2 of the R&TTE Directive


57 EN 301 489-1 v1.9.2:2011    Electromagnetic compatibility and Radio spectrum          NC   34   6 MCSI
                               Matters (ERM);ElectroMagnetic Compatibility (EMC)
                               standard for radio equipment and services;Part 1:
                               Common technical requirements
58 EN 301 489-17 v2.2.1:2012   Electromagnetic compatibility and Radio spectrum          NC   12   6 MCSI
                               Matters (ERM);ElectroMagnetic Compatibility (EMC)
                               standard for radio equipment;Part 17: Specific conditions
                               for Broadband Data Transmission Systems

59 EN 301 489-23 v1.5.1:2011   Electromagnetic compatibility and Radio spectrum          NC   16   6 MCSI
                               Matters (ERM);ElectroMagnetic Compatibility (EMC)
                               standard for radio equipment and services;Part 23:
                               Specific conditions for IMT-2000 CDMA, Direct Spread
                               (UTRA and E-UTRA) Base Station (BS) radio, repeater
                               and ancillary equipment
60 EN 301 489-34 v1.3.1:2012   Electromagnetic compatibility and Radio spectrum          NC   15   6 MCSI
                               Matters (ERM);ElectroMagnetic Compatibility (EMC)
                               standard for radio equipment and services;Part 34:
                               Specific conditions for External Power Supply (EPS) for
                               mobile phones
61 EN 301 559-1 v1.1.2:2012    Electromagnetic compatibility and Radio spectrum          NC   39   6 MCSI
                               Matters (ERM);Short Range Devices (SRD);Low Power
                               Active Medical Implants (LP-AMI) operating in the
                               frequency range 2 483,5 MHz to 2 500 MHz;Part 1:
                               Technical characteristics and test methods
62 EN 301 559-2 v1.1.2:2012     Electromagnetic compatibility and Radio spectrum        NC     13   6 MCSI
                                Matters (ERM);Short Range Devices (SRD);Low Power
                                Active Medical Implants (LP-AMI) operating in the
                                frequency range 2 483,5 MHz to 2 500 MHz;Part 2:
                                Harmonized EN covering the essential requirements of
                                article 3.2 of the R&TTE Directive
63 EN 301 841-3 v1.1.1:2011     VHF air-ground Digital Link (VDL) Mode 2;Technical     NC      15   6 MCSI
                                characteristics and methods of measurement for ground-
                                based equipment;Part 3: Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
64 EN 301 843-1 v1.3.1:2012     Electromagnetic compatibility and Radio spectrum         NC    24   6 MCSI
                                Matters (ERM);ElectroMagnetic Compatibility (EMC)
                                standard for marine radio equipment and services;Part 1:
                                Common technical requirements
65 EN 302 208-2 v1.4.1:2011     Electromagnetic compatibility and Radio spectrum       NC      12   6 MCSI
                                Matters (ERM);Radio Frequency Identification Equipment
                                operating in the band 865 MHz to 868 MHz with power
                                levels up to 2 W;Part 2: Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
66 EN 302 288-2 v1.6.1:2012     Electromagnetic compatibility and Radio spectrum          NC   12   6 MCSI
                                Matters (ERM);Short Range Devices;Road Transport and
                                Traffic Telematics (RTTT);Short range radar equipment
                                operating in the 24 GHz range;Part 2: Harmonized EN
                                covering the essential requirements of article 3.2 of the
                                R&TTE Directive
67 EN 302 858-2 v1.2.1:2011     Electromagnetic compatibility and Radio spectrum         NC    11   6 MCSI
                                Matters (ERM);Road Transport and Traffic Telematics
                                (RTTT);Short range radar equipment operating in the
                                24,05 GHz to 24,25 GHz frequency range for automotive
                                application;Part 2: Harmonized EN covering the essential
                                requirements of article 3.2 of the R&TTE Directive


68 EN 302 885-2 v1.1.1:2011     Electromagnetic compatibility and Radio spectrum         NC    16   6 MCSI
                                Matters (ERM);Portable Very High Frequency (VHF)
                                radiotelephone equipment for the maritime mobile service
                                operating in the VHF bands with integrated handheld
                                class D DSC;Part 2: Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
69 EN 302 885-3 v1.1.1:2011     Electromagnetic compatibility and Radio spectrum         NC    15   6 MCSI
                                Matters (ERM);Portable Very High Frequency (VHF)
                                radiotelephone equipment for the maritime mobile service
                                operating in the VHF bands with integrated handheld
                                class D DSC;Part 3: Harmonized EN covering the
                                essential requirements of article 3.3(e) of the R&TTE
                                Directive
70 EN 303 213-6-1 v1.1.1:2011   Advanced Surface Movement Guidance and Control          NC     20   6 MCSI
                                System (A-SMGCS);Part 6: Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive for deployed surface movement radar
                                sensors;Sub-part 1: X-band sensors using pulsed signals
                                and transmitting power up to 100 kW
71 EN 305 550-2 v1.1.1:2011     Electromagnetic compatibility and Radio spectrum        NC     12   6 MCSI
                                Matters (ERM);Short Range Devices (SRD);Radio
                                equipment to be used in the 40 GHz to 246 GHz
                                frequency range;Part 2: Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
72 EN 50130-4:2011           Alarm systems -- Part 4: Electromagnetic compatibility -   NC   24   27 MCSI
                             Product family standard: Immunity requirements for
                             components of fire, intruder, hold up, CCTV, access
                             control and social alarm systems
73 EN 55014-1:2006/A2:2011   Electromagnetic compatibility - Requirements for           NC   6    30 MCSI
                             household appliances, electric tools and similar
                             apparatus -- Part 1: Emission
74 EN 55020:2007/A11:2011    Sound and television broadcast receivers and associated NC      2    30 MCSI
                             equipment - Immunity characteristics - Limits and
                             methods of measurement
75 EN 55032:2012             Electromagnetic compatibility of multimedia equipment - NC      68   30 MCSI
                             Emission requirements
76 EN 61000-3-12:2011        Electromagnetic compatibility (EMC) -- Part 3-12: Limits - NC   27   30 MCSI
                             Limits for harmonic currents produced by equipment
                             connected to public low-voltage systems with input
                             current > 16 A and <= 75 A per phase
77 EN 61800-3:2004/A1:2012   Adjustable speed electrical power drive systems -- Part 3: NC   15   36 MCSI
                             EMC requirements and specific test methods
78 EN 50377-14-1:2011        Connector sets and interconnect components to be used NC        13 138 MCSI
                             in optical fibre communication systems - Product
                             specifications -- Part 14-1: Cords with IEC 60793-2-50
                             singlemode category B1.1 and B1.3 fibre for category C

79 EN 50377-16-1:2011        Connector sets and interconnect components to be used NC        19 138 MCSI
                             in optical fibre communication systems - Product
                             specifications -- Part 16-1: Type LF3 APC simplex
                             terminated on IEC 60793-2-50 category B1.1 and B1.3
                             singlemode fibre with titanium composite ferrule for
                             category C
80 EN 50411-2-2:2012         Fibre organisers and closures to be used in optical fibre NC    23 138 MCSI
                             communication systems - Product specifications -- Part 2-
                             2: Sealed pan fibre splice closures Type 1, for category S
                             &A
81 EN 50411-2-3:2012         Fibre organisers and closures to be used in optical fibre NC    24 138 MCSI
                             communication systems - Product specifications -- Part 2-
                             3: Sealed inline fibre splice closures Type 1, for category
                             S&A
82 EN 50411-2-4:2012         Fibre organisers and closures to be used in optical fibre NC    22 138 MCSI
                             communication systems - Product specifications -- Part 2-
                             4: Sealed dome fibre splice closures Type 1, for category
                             S&A
83 EN 50411-3-3:2011         Fibre organisers and closures to be used in optical fibre NC    16 138 MCSI
                             communication systems - Product specifications -- Part 3-
                             3: Singlemode optical fibre fusion splice protectors

84 EN 50411-6-1:2011         Fibre organisers and closures to be used in optical fibre NC    8 138 MCSI
                             communication systems - Product specifications -- Part 6-
                             1: Unprotected microduct for category S and A

85 EN 50516-1-1:2011         Industrial connector sets and interconnect components to NC     23 138 MCSI
                             be used in optical fibre control and communication
                             systems - Product specifications -- Part 1-1: Type SC-RJ
                             PC industrial terminated on EN 60793-2-10 category A1a
                             and A1b multimode fibre to meet the requirements of
                             category I (industrial environments) as specified in IEC
                             61753-1-3
 86 EN 50516-2-1:2011    Industrial connector sets and interconnect components to NC       22 138 MCSI
                         be used in optical fibre control and communication
                         systems - Product specifications -- Part 2-1: Type ODVA
                         PC industrial terminated on EN 60793-2-10 category A1a
                         and A1b multimode fibre to meet the requirements of
                         category I (industrial environments) as specified in EN
                         50173-1 and IEC 61753-1-3


 87 EN 60793-1-44:2011   Optical fibres -- Part 1-44: Measurement methods and         NC   18 138 MCSI
                         test procedures - Cut-off wavelength
 88 EN 60793-2:2012      Optical fibres -- Part 2: Product specifications - General   NC   12 138 MCSI

 89 EN 60794-1-1:2011    Optical fibre cables -- Part 1-1: Generic specification -    NC   14 138 MCSI
                         General
 90 EN 60794-2-10:2011   Optical fibre cables -- Part 2-10: Indoor optical fibre      NC   19 138 MCSI
                         cables - Family specification for simplex and duplex
                         cables
 91 EN 60874-1:2012      Fibre optic interconnecting devices and passive              NC   22 138 MCSI
                         components - Connectors for optical fibres and cables --
                         Part 1: Generic specification
 92 EN 60874-1-1:2012    Fibre optic interconnecting devices and passive              NC   10 138 MCSI
                         components - Connectors for optical fibres and cables --
                         Part 1-1: Blank detail specification
 93 EN 61274-1:2012      Fibre optic interconnecting devices and passive              NC   21 138 MCSI
                         components - Adaptors for fibre optic connectors -- Part
                         1: Generic specification
 94 EN 61274-1-1:2012    Fibre optic interconnecting devices and passive             NC    10 138 MCSI
                         components - Adaptors for fibre optic connectors -- Part 1-
                         1: Blank detail specification
 95 EN 61290-4-1:2011    Optical amplifiers - Test methods -- Part 4-1: Gain          NC   16 138 MCSI
                         transient parameters - Two-wavelength method
 96 EN 61290-4-2:2011    Optical amplifiers - Test methods -- Part 4-2: Gain          NC   15 138 MCSI
                         transient parameters - Broadband source method
 97 EN 61291-2:2012      Optical amplifiers -- Part 2: Digital applications -         NC   9 138 MCSI
                         Performance specification template
 98 EN 61291-4:2012      Optical amplifiers -- Part 4: Multichannel applications -    NC   10 138 MCSI
                         Performance specification template
 99 EN 61300-3-28:2012   Fibre optic interconnecting devices and passive              NC   12 138 MCSI
                         components - Basic test and measurement procedures --
                         Part 3-28: Examinations and measurements - Transient
                         loss
100 EN 61300-3-33:2012   Fibre optic interconnecting devices and passive          NC       9 138 MCSI
                         components - Basic test and measurement procedures --
                         Part 3-33: Examinations and measurements - Withdrawal
                         force from a resilient alignment sleeve using gauge pins

101 EN 61300-3-39:2012   Fibre optic interconnecting devices and passive         NC        11 138 MCSI
                         components - Basic test and measurement procedures --
                         Part 3-39: Examinations and measurements - Physical
                         contact (PC) optical connector reference plug selection
                         for return loss measurements


102 EN 61300-3-45:2011   Fibre optic interconnecting devices and passive        NC         13 138 MCSI
                         components - Basic test and measurement procedures --
                         Part 3-45: Examinations and measurements - Attenuation
                         of random mated multi-fibre connectors

103 EN 61300-3-46:2011   Fibre optic interconnecting devices and passive         NC        6 138 MCSI
                         components - Basic test and measurement procedures --
                         Part 3-46: Measurement - Bore diameter for guide pin in
                         MT ferrules
104 EN 61300-3-7:2012           Fibre optic interconnecting devices and passive       NC         24 138 MCSI
                                components - Basic test and measurement procedures --
                                Part 3-7: Examinations and measurements - Wavelength
                                dependence of attenuation and return loss of single
                                mode components


105 EN 61314-1:2012             Fibre optic interconnecting devices and passive            NC    19 138 MCSI
                                components - Fibre optic fan-outs -- Part 1: Generic
                                specification
106 EN 61314-1-1:2012           Fibre optic interconnecting devices and passive             NC   12 138 MCSI
                                components - Fibre optic fan-outs -- Part 1-1: Blank detail
                                specification
107 EN 61753-087-6:2012         Fibre optic interconnecting devices and passive       NC         14 138 MCSI
                                components - Performance standard -- Part 087-6: Non-
                                connectorised single-mode bidirectional 1310 nm
                                upstream and 1490 nm downstream WWDM devices for
                                category O - Uncontrolled environment
108 EN 61753-141-2:2011         Fibre optic interconnecting devices and passive        NC        14 138 MCSI
                                components - Performance standard -- Part 141-2: Fibre
                                optic passive chromatic dispersion compensator using
                                single-mode dispersion compensating fibre for category
                                C - Controlled environments


109 EN 61755-3-6:2006/A1:2012   Fibre optic connector optical interfaces -- Part 3-6:      NC     3 138 MCSI
                                Optical interface - 2,5 mm and 1,25 mm diameter
                                cylindrical 8 degrees angled-PC composite ferrule using
                                Cu-Ni-alloy as fibre surrounding material, single mode
                                fibre
110 EN 62129-2:2011             Calibration of wavelength/optical frequency measurement NC       42 138 MCSI
                                instruments -- Part 2: Michelson interferometer single
                                wavelength meters
111 EN 62149-1:2012             Fibre optic active components and devices -                NC    14 138 MCSI
                                Performance standards -- Part 1: General and guidance

112 EN 62149-7:2012             Fibre optic active components and devices -                NC    23 138 MCSI
                                Performance standards -- Part 7: 1 310 nm discrete
                                vertical cavity surface emitting laser devices
113 EN 62496-2-1:2011           Optical circuit boards -- Part 2-1: Measurements - Optical NC    20 138 MCSI
                                attenuation and isolation
114 EN 62572-3:2012             Fibre optic active components and devices - Reliability    NC    18 138 MCSI
                                standards -- Part 3: Laser modules used for
                                telecommunication
115 EN 14597:2012               Temperature control devices and temperature limiters for   NC    30 207 MCSI
                                heat generating systems
116 EN 15232:2012               Energy performance of buildings - Impact of Building       NC    88 207 MCSI
                                Automation, Controls and Building Management
117 EN 50173-1:2011             Information technology - Generic cabling systems -- Part   NC    141 207 MCSI
                                1: General requirements
118 EN 300 176-2 v2.2.1:2012    Digital Enhanced Cordless Telecommunications               NC    167 220 MCSI
                                (DECT);Test specification;Part 2: Audio and speech
119 EN 300 392-7 v3.3.1:2012    Terrestrial Trunked Radio (TETRA);Voice plus Data          NC    158 220 MCSI
                                (V+D);Part 7: Security
120 EN 300 396-6 v1.5.1:2012    Terrestrial Trunked Radio (TETRA);Direct Mode              NC    36 220 MCSI
                                Operation (DMO);Part 6: Security
121 EN 301 893 v1.6.1:2011      Broadband Radio Access Networks (BRAN);5 GHz high          NC    59 220 MCSI
                                performance RLAN;Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
122 EN 301 893 v1.7.1:2012      Broadband Radio Access Networks (BRAN);5 GHz high          NC    68 220 MCSI
                                performance RLAN;Harmonized EN covering the
                                essential requirements of article 3.2 of the R&TTE
                                Directive
123 EN 302 567 v1.2.1:2012      Broadband Radio Access Networks (BRAN);60 GHz               NC   22 220 MCSI
                                Multiple-Gigabit WAS/RLAN Systems;Harmonized EN
                                covering the essential requirements of article 3.2 of the
                                R&TTE Directive
124 EN 302 774 v1.2.1:2012      Broadband Wireless Access Systems (BWA) in the 3 400 NC          24 220 MCSI
                                MHz to 3 800 MHz frequency band;Base
                                Stations;Harmonized EN covering the essential
                                requirements of article 3.2 of the R&TTE Directive
125 EN 300 468 v1.13.1:2012     Digital Video Broadcasting (DVB);Specification for     NC        108 269 MCSI
                                Service Information (SI) in DVB systems
126 EN 301 444 v1.2.1:2012      Satellite Earth Stations and Systems (SES);Harmonized NC         23 269 MCSI
                                EN for Land Mobile Earth Stations (LMES) operating in
                                the 1,5 GHz and 1,6 GHz bands providing voice and/or
                                data communications covering essential requirements of
                                article 3.2 of the R&TTE directive


127 EN 301 681 v1.4.1:2011      Satellite Earth Stations and Systems (SES);Harmonized NC         35 269 MCSI
                                EN for Mobile Earth Stations (MESs) of Geostationary
                                mobile satellite systems, including handheld earth
                                stations, for Satellite Personal Communications Networks
                                (S-PCN) in the 1,5/1,6 GHz bands under the Mobile
                                Satellite Service(MSS) covering the essential
                                requirements of article 3.2 of the R&TTE Directive


128 EN 301 908-1 v5.2.1:2011    IMT cellular networks;Harmonized EN covering the            NC   20 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 1: Introduction and common requirements

129 EN 301 908-13 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   30 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 13: Evolved Universal Terrestrial Radio
                                Access (E-UTRA) User Equipment (UE)
130 EN 301 908-14 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   42 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 14: Evolved Universal Terrestrial Radio
                                Access (E-UTRA) Base Stations (BS)
131 EN 301 908-19 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   28 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 19: OFDMA TDD WMAN (Mobile WiMAX)
                                TDD User Equipment (UE)
132 EN 301 908-20 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   28 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 20: OFDMA TDD WMAN (Mobile WiMAX)
                                TDD Base Stations (BS)
133 EN 301 908-21 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   29 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 21: OFDMA TDD WMAN (Mobile WiMAX)
                                FDD User Equipment (UE)
134 EN 301 908-22 v5.2.1:2011   IMT cellular networks;Harmonized EN covering the            NC   30 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 22: OFDMA TDD WMAN (Mobile WiMAX)
                                FDD Base Stations (BS)
135 EN 301 908-4 v5.2.1:2011    IMT cellular networks;Harmonized EN covering the            NC   46 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 4: CDMA Multi-Carrier (cdma2000) User
                                Equipment (UE)
136 EN 301 908-5 v5.2.1:2011    IMT cellular networks;Harmonized EN covering the            NC   42 269 MCSI
                                essential requirements of article 3.2 of the R&TTE
                                Directive;Part 5: CDMA Multi-Carrier (cdma2000) Base
                                Stations (BS)
137 EN 50360:2001/A1:2012     Product standard to demonstrate the compliance of           NC    2 279 MCSI
                              mobile phones with the basic restrictions related to
                              human exposure to electromagnetic fields (300 MHz - 3
                              GHz)
138 EN 50401:2006/A1:2011     Product standard to demonstrate the compliance of fixed NC        2 279 MCSI
                              equipment for radio transmission (110 MHz - 40 GHz)
                              intended for use in wireless telecommunication networks
                              with the basic restrictions or the reference levels related
                              to general public exposure to radio frequency
                              electromagnetic fields, when put into service


139 EN ISO/IEC 19762-1:2012   Information technology - Automatic identification and data NC    29 300 MCSI
                              capture (AIDC) techniques - Harmonized vocabulary -
                              Part 1: General terms relating to AIDC (ISO/IEC 19762-
                              1:2008)
140 EN ISO/IEC 19762-3:2012   Information technology - Automatic identification and data NC    16 300 MCSI
                              capture (AIDC) techniques - Harmonized vocabulary -
                              Part 3: Radio frequency identification (RFID) (ISO/IEC
                              19762-3:2008)
141 EN ISO 27953-1:2011       Health informatics - Individual case safety reports         NC    2 319 MCSI
                              (ICSRs) in pharmacovigilance - Part 1: Framework for
                              adverse event reporting (ISO 27953-1:2011)
142 EN ISO 27953-2:2011       Health informatics - Individual case safety reports         NC   440 319 MCSI
                              (ICSRs) in pharmacovigilance - Part 2: Human
                              pharmaceutical reporting requirements for ICSR (ISO
                              27953-2:2011)
143 EN 60268-16:2011          Sound system equipment -- Part 16: Objective rating of      NC   71 375 MCSI
                              speech intelligibility by speech transmission index
144 EN 60728-6:2011           Cable networks for television signals, sound signals and    NC   56 375 MCSI
                              interactive services -- Part 6: Optical equipment
145 EN 61937-1:2007/A1:2011   Digital audio - Interface for non-linear PCM encoded        NC    3 375 MCSI
                              audio bitstreams applying IEC 60958 -- Part 1: General

146 EN 61937-10:2011          Digital audio - Interface for non-linear PCM encoded        NC   13 375 MCSI
                              audio bitstreams applying IEC 60958 -- Part 10: Non-
                              linear PCM bitstreams according to the MPEG-4 Audio
                              Lossless Coding (ALS) format
147 EN 61937-2:2007/A1:2011   Digital audio - Interface for non-linear PCM encoded      NC      6 375 MCSI
                              audio bitstreams applying IEC 60958 -- Part 2: Burst-info

148 EN 62516-2:2011           Terrestrial digital multimedia broadcasting (T-DMB)         NC   13 375 MCSI
                              receivers -- Part 2: Interactive data services using BIFS

149 EN 62605:2011             Multimedia systems and equipment - Multimedia e-            NC   89 375 MCSI
                              publishing and e-books - Interchange format for e-
                              dictionaries
150 EN 62634:2011             Radio data system (RDS) - Receiver products and             NC   14 375 MCSI
                              characteristics - Methods of measurement
151 EN 14142-1:2011           Postal services - Address databases - Part 1:               NC   63 379 MCSI
                              Components of postal addresses
152 EN 15982:2011             Metadata for Learning Opportunities (MLO) - Advertising     NC    9 379 MCSI

153 EN 490:2011               Concrete roofing tiles and fittings for roof covering and   NC   21 113 MDRT
                              wall cladding - Product specifications
154 EN 13583:2012             Flexible sheets for waterproofing - Bitumen, plastic and    NC    5 113 MDRT
                              rubber sheets for roof waterproofing - Determination of
                              hail resistance
155 EN 13967:2012             Flexible sheets for waterproofing - Plastic and rubber  NC       24 113 MDRT
                              damp proof sheets including plastic and rubber basement
                              tanking sheet - Definitions and characteristics
156 EN 15814:2011            Polymer modified bituminous thick coatings for                NC   9 113 MDRT
                             waterproofing - Definitions and requirements
157   EN 31:2011             Wash basins - Connecting dimensions                           NC    6   114   MDRT
158   EN 33:2011             WC pans and WC suites - Connecting dimensions                 NC    4   114   MDRT
159   EN 997:2012            WC pans and WC suites with integral trap                      NC   45   114   MDRT
160   EN ISO 10545-16:2012   Ceramic tiles - Part 16: Determination of small colour        NC    6   114   MDRT
                             differences (ISO 10545-16:2010)
161 EN ISO 10545-4:2012      Ceramic tiles - Part 4: Determination of modulus of           NC   6 114 MDRT
                             rupture and breaking strength (ISO 10545-4:2004)
162 EN ISO 10545-6:2012      Ceramic tiles - Part 6: Determination of resistance to        NC   5 114 MDRT
                             deep abrasion for unglazed tiles (ISO 10545-6:2010)

163 EN 12004:2007+A1:2012    Adhesives for tiles - Requirements, evaluation of             NC   27 114 MDRT
                             conformity, classification and designation
164 EN 14891:2012            Liquid-applied water impermeable products for use             NC   27 114 MDRT
                             beneath ceramic tiling bonded with adhesives -
                             Requirements, test methods, evaluation of conformity,
                             classification and designation
165 EN 1467:2012             Natural stone - Rough blocks - Requirements                   NC   11 115 MDRT
166 EN 1468:2012             Natural stone - Rough slabs - Requirements                    NC   12 115 MDRT
167 EN 12059:2008+A1:2011    Natural stone products - Dimensional stone work -             NC   16 115 MDRT
                             Requirements
168 EN 14617-10:2012         Agglomerated stone - Test methods - Part 10:                  NC   8 115 MDRT
                             Determination of chemical resistance
169 EN 14617-12:2012         Agglomerated stone - Test methods - Part 12:                  NC   6 115 MDRT
                             Determination of dimensional stability
170 EN 14617-4:2012          Agglomerated stone - Test methods - Part 4:                   NC   7 115 MDRT
                             Determination of the abrasion resistance
171 EN 14617-5:2012          Agglomerated stone - Test methods - Part 5:                   NC   5 115 MDRT
                             Determination of freeze and thaw resistance
172 EN 14617-6:2012          Agglomerated stone - Test methods - Part 6:                   NC   6 115 MDRT
                             Determination of thermal shock resistance
173 EN 572-1:2012            Glass in building - Basic soda lime silicate glass products   NC   7 122 MDRT
                             - Part 1: Definitions and general physical and mechanical
                             properties
174 EN 572-2:2012            Glass in building - Basic soda lime silicate glass products   NC   7 122 MDRT
                             - Part 2: Float glass
175 EN 572-3:2012            Glass in building - Basic soda lime silicate glass products   NC   5 122 MDRT
                             - Part 3: Polished wired glass
176 EN 572-4:2012            Glass in building - Basic soda lime silicate glass products   NC   6 122 MDRT
                             - Part 4: Drawn sheet glass
177 EN 572-5:2012            Glass in building - Basic soda lime silicate glass products   NC   5 122 MDRT
                             - Part 5: Patterned glass
178 EN 572-6:2012            Glass in building - Basic soda lime silicate glass products   NC   5 122 MDRT
                             - Part 6: Wired patterned glass
179 EN 572-7:2012            Glass in building - Basic soda lime silicate glass products   NC   5 122 MDRT
                             - Part 7: Wired or unwired channel shaped glass

180 EN 572-8:2012            Glass in building - Basic soda lime silicate glass products NC     15 122 MDRT
                             - Part 8: Supplied and final cut sizes
181 EN 1096-1:2012           Glass in building - Coated glass - Part 1: Definitions and NC      14 122 MDRT
                             classification
182 EN 1096-2:2012           Glass in building - Coated glass - Part 2: Requirements NC         17 122 MDRT
                             and test methods for class A, B and S coatings

183 EN 1096-3:2012           Glass in building - Coated glass - Part 3: Requirements       NC   12 122 MDRT
                             and test methods for class C and D coatings

184 EN 1863-1:2011           Glass in building - Heat strengthened soda lime silicate      NC   17 122 MDRT
                             glass - Part 1: Definition and description
185 EN 13024-1:2011          Glass in building - Thermally toughened borosilicate          NC   18 122 MDRT
                             safety glass - Part 1: Definition and description
186 EN 13541:2012                 Glass in building - Security glazing - Testing and         NC     7 122 MDRT
                                  classification of resistance against explosion pressure

187 HD 60364-7-709:2009/A1:2012   Low-voltage electrical installations -- Part 7-709:        NC     3 136 MDRT
                                  Requirements for special installations or locations -
                                  Marinas and similar locations
188 HD 60364-7-714:2012           Low-voltage electrical installations -- Part 7-714:        NC     9 136 MDRT
                                  Requirements for special installations or locations -
                                  External lighting installations
189 HD 60364-7-715:2012           Low-voltage electrical installations -- Part 7-715:          NC   12 136 MDRT
                                  Requirements for special installations or locations - Extra-
                                  low-voltage lighting installations
190 HD 60364-7-722:2012           Low voltage electrical installations -- Part 7-722:        NC     8 136 MDRT
                                  Requirements for special installations or locations -
                                  Supply of electric vehicle
191 EN 295-3:2012                 Vitrified clay pipe systems for drains and sewers - Part 3: NC    31 186 MDRT
                                  Test methods
192 EN 1317-5:2007+A2:2012        Road restraint systems - Part 5: Product requirements       NC    31 187 MDRT
                                  and evaluation of conformity for vehicle restraint systems

193 EN 1423:2012                  Road marking materials - Drop on materials - Glass       NC       53 187 MDRT
                                  beads, antiskid aggregates and mixtures of the two
194 EN 12697-1:2012               Bituminous mixtures - Test methods for hot mix asphalt - NC       42 187 MDRT
                                  Part 1: Soluble binder content
195 EN 12697-11:2012              Bituminous mixtures - Test methods for hot mix asphalt - NC       26 187 MDRT
                                  Part 11: Determination of the affinity between aggregate
                                  and bitumen
196 EN 12697-19:2012              Bituminous mixtures - Test methods for hot mix asphalt - NC       10 187 MDRT
                                  Part 19: Permeability of specimen
197 EN 12697-20:2012              Bituminous mixtures - Test methods for hot mix asphalt - NC       12 187 MDRT
                                  Part 20: Indentation using cube or cylindrical specimens
                                  (CY)
198 EN 12697-21:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     8 187 MDRT
                                  Part 21: Indentation using plate specimens
199 EN 12697-24:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     47 187 MDRT
                                  Part 24: Resistance to fatigue
200 EN 12697-26:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     38 187 MDRT
                                  Part 26: Stiffness
201 EN 12697-30:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     16 187 MDRT
                                  Part 30: Specimen preparation by impact compactor

202 EN 12697-34:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     10 187 MDRT
                                  Part 34: Marshall test
203 EN 12697-39:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     20 187 MDRT
                                  Part 39: Binder content by ignition
204 EN 12697-40:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     10 187 MDRT
                                  Part 40: In situ drainability
205 EN 12697-45:2012              Bituminous mixtures - Test methods for hot mix asphalt -   NC     15 187 MDRT
                                  Part 45: Saturation Ageing Tensile Stiffness (SATS)
                                  conditioning test
206 EN 12697-46:2012              Bituminous mixtures - Test methods for hot mix asphalt - NC       18 187 MDRT
                                  Part 46: Low temperature cracking and properties by
                                  uniaxial tension tests
207 EN 12697-6:2012               Bituminous mixtures - Test methods for hot mix asphalt - NC       14 187 MDRT
                                  Part 6: Determination of bulk density of bituminous
                                  specimens
208 EN 13036-4:2011               Road and airfield surface characteristics - Test methods - NC     28 187 MDRT
                                  Part 4: Method for measurement of slip/skid resistance of
                                  a surface: The pendulum test
209 EN 13286-47:2012              Unbound and hydraulically bound mixtures - Part 47: Test NC     11 187 MDRT
                                  method for the determination of California bearing ratio,
                                  immediate bearing index and linear swelling

210 EN 13863-4:2012               Concrete pavements - Part 4: Test methods for the          NC   5 187 MDRT
                                  determination of wear resistance of concrete pavements
                                  to studded tyres
211 EN 671-1:2012                 Fixed firefighting systems - Hose systems - Part 1: Hose NC     30 216 MDRT
                                  reels with semi-rigid hose
212 EN 671-2:2012                 Fixed firefighting systems - Hose systems - Part 2: Hose NC     27 216 MDRT
                                  systems with lay-flat hose
213 EN 13032-1:2004+A1:2012       Light and lighting - Measurement and presentation of     NC     53 240 MDRT
                                  photometric data of lamps and luminaires - Part 1:
                                  Measurement and file format
214 EN ISO 12677:2011             Chemical analysis of refractory products by X-ray          NC   73 258 MDRT
                                  fluorescence (XRF) - Fused cast-bead method (ISO
                                  12677:2011)
215 EN ISO 14719:2011             Chemical analysis of refractory material glass and glazes NC    13 258 MDRT
                                  - Determination of Fe2+ and Fe3+ by the spectral
                                  photometric method with 1,10-phenanthroline (ISO
                                  14719:2011)
216 EN ISO 3382-3:2012            Acoustics - Measurement of room acoustic parameters - NC        17 276 MDRT
                                  Part 3: Open plan offices (ISO 3382-3:2012)

217 EN ISO 10140-1:2010/A1:2012   Acoustics - Laboratory measurement of sound insulation NC       9 276 MDRT
                                  of building elements - Part 1: Application rules for specific
                                  products - Amendment 1: Guidelines for the
                                  determination of the sound reduction index of joints filled
                                  with fillers and/or seals (ISO 10140-1:2010/Amd 1:2012)


218 EN ISO 10077-2:2012           Thermal performance of windows, doors and shutters -       NC   23 281 MDRT
                                  Calculation of thermal transmittance - Part 2: Numerical
                                  method for frames (ISO 10077-2:2012)
219 EN ISO 13791:2012             Thermal performance of buildings - Calculation of internal NC   60 281 MDRT
                                  temperatures of a room in summer without mechanical
                                  cooling - General criteria and validation procedures (ISO
                                  13791:2012)
220 EN ISO 13792:2012             Thermal performance of buildings - Calculation of internal NC   32 281 MDRT
                                  temperatures of a room in summer without mechanical
                                  cooling - Simplified methods (ISO 13792:2012)

221 EN ISO 15927-5:2004/A1:2011   Hygrothermal performance of buildings - Calculation and NC      3 281 MDRT
                                  presentation of climatic data - Part 5: Data for design
                                  heat load for space heating - Amendment 1 (ISO 15927-
                                  5:2004/Amd 1:2011)
222 EN 16012:2012                 Thermal insulation for buildings - Reflective insulation   NC   24 281 MDRT
                                  products - Determination of the declared thermal
                                  performance
223 EN 779:2012                   Particulate air filters for general ventilation -          NC   50 302 MDRT
                                  Determination of the filtration performance
224 EN 12977-1:2012               Thermal solar systems and components - Custom built        NC   18 302 MDRT
                                  systems - Part 1: General requirements for solar water
                                  heaters and combisystems
225 EN 12977-2:2012               Thermal solar systems and components - Custom built        NC   46 302 MDRT
                                  systems - Part 2: Test methods for solar water heaters
                                  and combisystems
226 EN 12977-3:2012               Thermal solar systems and components - Custom built        NC   41 302 MDRT
                                  systems - Part 3: Performance test methods for solar
                                  water heater stores
227 EN 12977-4:2012               Thermal solar systems and components - Custom built        NC   14 302 MDRT
                                  systems - Part 4: Performance test methods for solar
                                  combistores
228 EN 12977-5:2012           Thermal solar systems and components - Custom built          NC   51 302 MDRT
                              systems - Part 5: Performance test methods for control
                              equipment
229 EN 15726:2011             Ventilation for buildings - Air diffusion - Measurements in NC    11 302 MDRT
                              the occupied zone of air-conditioned/ventilated rooms to
                              evaluate thermal and acoustic conditions

230 EN 15780:2011             Ventilation for buildings - Ductwork - Cleanliness of        NC   27 302 MDRT
                              ventilation systems
231 EN 1906:2012              Building hardware - Lever handles and knob furniture -       NC   37 318 MDRT
                              Requirements and test methods
232 EN 13126-1:2011           Building hardware - Hardware for windows and door            NC   16 318 MDRT
                              height windows - Requirements and test methods - Part
                              1: Requirements common to all types of hardware

233 EN 13126-13:2012          Building hardware - Hardware for windows and balcony         NC   9 318 MDRT
                              doors - Requirements and test methods - Part 13: Sash
                              balances
234 EN 13126-14:2012          Building hardware - Hardware for windows and balcony         NC   9 318 MDRT
                              doors - Requirements and test methods - Part 14: Sash
                              fasteners
235 EN 13126-2:2011           Building hardware - Requirements and test methods for        NC   12 318 MDRT
                              windows and doors height windows - Part 2: Window
                              fastener handles
236 EN 13126-3:2011           Building hardware - Hardware for windows and door-           NC   13 318 MDRT
                              height windows - Requirements and test methods - Part
                              3: Handles, primarily for Tilt&Turn, Tilt-First and Turn-
                              Only hardware
237 EN 13126-5:2011           Building hardware - Hardware for windows and door            NC   13 318 MDRT
                              height windows - Requirements and test methods - Part
                              5: Devices that restrict the opening of windows and door
                              height windows
238 EN 450-1:2012             Fly ash for concrete - Part 1: Definition, specifications NC      24 321 MDRT
                              and conformity criteria
239 EN 480-8:2012             Admixtures for concrete, mortar and grout - Test methods NC       4 321 MDRT
                              - Part 8: Determination of the conventional dry material
                              content
240 EN 932-5:2012             Tests for general properties of aggregates - Part 5:         NC   21 321 MDRT
                              Common equipment and calibration
241 EN 933-1:2012             Tests for geometrical properties of aggregates - Part 1:     NC   12 321 MDRT
                              Determination of particle size distribution - Sieving
                              method
242 EN 933-3:2012             Tests for geometrical properties of aggregates - Part 3:     NC   6 321 MDRT
                              Determination of particle shape - Flakiness index

243 EN 933-8:2012             Tests for geometrical properties of aggregates - Part 8:     NC   9 321 MDRT
                              Assessment of fines - Sand equivalent test
244 EN 934-2:2009+A1:2012     Admixtures for concrete, mortar and grout - Part 2:          NC   20 321 MDRT
                              Concrete admixtures - Definitions, requirements,
                              conformity, marking and labelling
245 EN 934-3:2009+A1:2012     Admixtures for concrete, mortar and grout - Part 3:          NC   12 321 MDRT
                              Admixtures for masonry mortar - Definitions,
                              requirements, conformity and marking and labelling
246 EN 1744-7:2012            Tests for chemical properties of aggregates - Part 7:        NC   5 321 MDRT
                              Determination of loss of ignition of Municipal Incinerator
                              Bottom Ash Aggregate (MIBA Aggregate)

247   EN 12839:2012           Precast concrete products - Elements for fences              NC   30   321   MDRT
248   EN 13224:2011           Precast concrete products - Ribbed floor elements            NC   26   321   MDRT
249   EN 14844:2006+A2:2011   Precast concrete products - Box culverts                     NC   27   321   MDRT
250   EN 14992:2007+A1:2012   Precast concrete products - Wall elements                    NC   24   321   MDRT
251   EN 15050:2007+A1:2012   Precast concrete products - Bridge elements                  NC   36   321   MDRT
252 EN 408:2010+A1:2012        Timber structures - Structural timber and glued laminated NC      25 326 MDRT
                               timber - Determination of some physical and mechanical
                               properties
253 EN 1090-1:2009+A1:2011     Execution of steel structures and aluminium structures -     NC   42 326 MDRT
                               Part 1: Requirements for conformity assessment of
                               structural components
254 EN 1090-2:2008+A1:2011     Execution of steel structures and aluminium structures -     NC   162 326 MDRT
                               Part 2: Technical requirements for steel structures

255 EN 1912:2012               Structural Timber - Strength classes - Assignment of       NC      9 326 MDRT
                               visual grades and species
256 EN 14081-3:2012            Timber structures - Strength graded structural timber with NC     12 326 MDRT
                               rectangular cross section - Part 3: Machine grading;
                               additional requirements for factory production control

257 EN 14592:2008+A1:2012      Timber structures - Dowel-type fasteners - Requirements NC        34 326 MDRT

258 EN ISO 6927:2012           Buildings and civil engineering works - Sealants -           NC   10 335 MDRT
                               Vocabulary (ISO 6927:2012)
259 EN 15643-3:2012            Sustainability of construction works - Assessment of         NC   27 335 MDRT
                               buildings - Part 3: Framework for the assessment of
                               social performance
260 EN 15643-4:2012            Sustainability of construction works - Assessment of         NC   35 335 MDRT
                               buildings - Part 4: Framework for the assessment of
                               economic performance
261 EN 15651-1:2012            Sealants for non-structural use in joints in buildings and   NC   23 335 MDRT
                               pedestrian walkways - Part 1: Sealants for facade
                               elements
262 EN 15651-2:2012            Sealants for non-structural use in joints in buildings and   NC   19 335 MDRT
                               pedestrian walkways - Part 2: Sealants for glazing

263 EN 15651-3:2012            Sealants for non-structural use in joints in buildings and NC     18 335 MDRT
                               pedestrian walkways - Part 3: Sealants for sanitary joints

264 EN 15651-4:2012            Sealants for non-structural use in joints in buildings and   NC   23 335 MDRT
                               pedestrian walkways - Part 4: Sealants for pedestrian
                               walkways
265 EN 15804:2012              Sustainability of construction works - Environmental       NC     53 335 MDRT
                               product declarations - Core rules for the product category
                               of construction products
266 EN 15942:2011              Sustainability of construction works - Environmental     NC       12 335 MDRT
                               product declarations - Communication format business-to-
                               business
267 EN 15978:2011              Sustainability of construction works - Assessment of         NC   52 335 MDRT
                               environmental performance of buildings - Calculation
                               method
268 EN 1998-2:2005/A2:2011     Eurocode 8: Design of structures for earthquake              NC    2 343 MDRT
                               resistance - Part 2: Bridges
269 EN 1999-1-3:2007/A1:2011   Eurocode 9: Design of aluminium structures - Part 1-3:       NC   17 343 MDRT
                               Structures susceptible to fatigue
270 EN 1999-1-4:2007/A1:2011   Eurocode 9: Design of aluminium structures - Part 1-4:       NC    2 343 MDRT
                               Cold-formed structural sheeting
271 EN 62561-4:2011            Lightning protection system components (LPSC) -- Part        NC   18 346 MDRT
                               4: Requirements for conductor fasteners
272 EN 62561-5:2011            Lightning protection system components (LPSC) -- Part        NC   10 346 MDRT
                               5: Requirements for earth electrode inspection housings
                               and earth electrode seals
273 EN 62561-6:2011            Lightning protection system components (LPSC) -- Part        NC   18 346 MDRT
                               6: Requirements for lightning strike counters (LSC)
274 EN 62561-7:2012               Lightning Protection System Components (LPSC) -- Part NC         13 346 MDRT
                                  7: Requirements for earthing enhancing compounds

275 EN 1457-1:2012                Chimneys - Clay/ceramic flue liners - Part 1: Flue liners   NC   34 347 MDRT
                                  operating under dry conditions - Requirements and test
                                  methods
276 EN 1457-2:2012                Chimneys - Clay/ceramic flue liners - Part 2: Flue liners   NC   37 347 MDRT
                                  operating under wet conditions - Requirements and test
                                  methods
277 EN 1745:2012                  Masonry and masonry products - Methods for                  NC   41 347 MDRT
                                  determining thermal properties
278 EN ISO 22282-1:2012           Geotechnical investigation and testing - Geohydraulic       NC   19 361 MDRT
                                  testing - Part 1: General rules (ISO 22282-1:2012)

279 EN ISO 22282-2:2012           Geotechnical investigation and testing - Geohydraulic       NC   16 361 MDRT
                                  testing - Part 2: Water permeability tests in a borehole
                                  using open systems (ISO 22282-2:2012)

280 EN ISO 22282-3:2012           Geotechnical investigation and testing - Geohydraulic      NC    17 361 MDRT
                                  testing - Part 3: Water pressure tests in rock (ISO 22282-
                                  3:2012)
281 EN ISO 22282-4:2012           Geotechnical investigation and testing - Geohydraulic       NC   21 361 MDRT
                                  testing - Part 4: Pumping tests (ISO 22282-4:2012)

282 EN ISO 22282-5:2012           Geotechnical investigation and testing - Geohydraulic       NC   14 361 MDRT
                                  testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)

283 EN ISO 22282-6:2012           Geotechnical investigation and testing - Geohydraulic       NC   11 361 MDRT
                                  testing - Part 6: Water permeability tests in a borehole
                                  using closed systems (ISO 22282-6:2012)

284 EN ISO 22476-2:2005/A1:2011   Geotechnical investigation and testing - Field testing -    NC   5 361 MDRT
                                  Part 2: Dynamic probing - Amendment 1 (ISO 22476-
                                  2:2005/Amd 1:2011)
285 EN ISO 22476-3:2005/A1:2011   Geotechnical investigation and testing - Field testing -    NC   4 361 MDRT
                                  Part 3: Standard penetration test - Amendment 1 (ISO
                                  22476-3:2005/Amd 1:2011)
286 EN 12226:2012                 Geosynthetics - General tests for evaluation following      NC   7 364 MDRT
                                  durability testing
287 EN 15221-3:2011               Facility Management - Part 3: Guidance on quality in        NC   33 365 MDRT
                                  Facility Management
288 EN 15221-4:2011               Facility Management - Part 4: Taxonomy, Classification      NC   63 365 MDRT
                                  and Structures in Facility Management
289 EN 15221-5:2011               Facility Management - Part 5: Guidance on Facility          NC   32 365 MDRT
                                  Management processes
290 EN 15221-6:2011               Facility Management - Part 6: Area and Space                NC   20 365 MDRT
                                  Measurement in Facility Management
291 EN 60034-16-1:2011            Rotating electrical machines -- Part 16-1: Excitation       NC   11   1 MECMA
                                  systems for synchronous machines - Definitions
292 EN 62023:2012                 Structuring of technical information and documentation      NC   24   2 MECMA

293 EN 62027:2012                 Preparation of object lists, including parts lists          NC   32   2 MECMA
294 EN 80416-3:2002/A1:2011       Basic principles for graphical symbols for use on           NC    6   2 MECMA
                                  equipment -- Part 3: Guidelines for the application of
                                  graphical symbols
295 EN 50216-12:2011              Power transformer and reactor fittings -- Part 12: Fans     NC   8    3 MECMA

296 EN 50464-1:2007/A1:2012       Three-phase oil-immersed distribution transformers 50       NC   3    3 MECMA
                                  Hz, from 50 kVA to 2 500 kVA with highest voltage for
                                  equipment not exceeding 36 kV -- Part 1: General
                                  requirements
297 EN 50464-4:2007/A1:2011     Three-phase oil-immersed distribution transformers 50        NC    2    3 MECMA
                                Hz, from 50 kVA to 2 500 kVA with highest voltage for
                                equipment not exceeding 36 kV -- Part 4: Requirements
                                and tests concerning pressurised corrugated tanks

298 EN 60076-1:2011             Power transformers -- Part 1: General                        NC    75   3 MECMA
299 EN 60076-16:2011            Power transformers -- Part 16: Transformers for wind         NC    27   3 MECMA
                                turbines applications
300 EN 61378-1:2011             Convertor transformers -- Part 1: Transformers for           NC    64   3 MECMA
                                industrial applications
301 EN 60505:2011               Evaluation and qualification of electrical insulation        NC    54   5 MECMA
                                systems
302 EN 60544-5:2012             Electrical insulating materials - Determination of the       NC    24   5 MECMA
                                effects of ionizing radiation -- Part 5: Procedures for
                                assessment of ageing in service
303 EN 60626-1:2012             Combined flexible materials for electrical insulation --      NC   9    5 MECMA
                                Part 1: Definitions and general requirements
304 EN 60674-3-1:1998/A1:2011   Plastic films for electrical purposes -- Part 3:              NC   4    5 MECMA
                                Specifications for individual materials -- Sheet 1: Biaxially
                                oriented polypropylene (PP) film for capacitors

305 EN 60674-3-8:2011           Plastic films for electrical purposes -- Part 3:             NC    9    5 MECMA
                                Specifications for individual materials -- Sheet 8:
                                Balanced biaxially oriented polyethylene naphthalate
                                (PEN) films used for electrical insulation
306 EN 60684-2:2011             Flexible insulating sleeving -- Part 2: Methods of test      NC    71   5 MECMA
307 EN 60684-3-116:2011         Flexible insulating sleeving -- Part 3: Specifications for   NC     8   5 MECMA
                                individual types of sleeving -- Sheets 116 and 117:
                                Extruded polychloroprene, general purpose
308 EN 60684-3-205:2011         Flexible insulating sleeving -- Part 3: Specifications for NC      9    5 MECMA
                                individual types of sleeving -- Sheet 205: Heat-shrinkable
                                chlorinated polyolefin sleeving, flame retarded, nominal
                                shrink ratio 1,7:1 and 2:1
309 EN 60684-3-247:2011         Flexible insulating sleeving -- Part 3: Specifications for NC      9    5 MECMA
                                individual types of sleeving -- Sheet 247: Heat-shrinkable
                                polyolefin sleeving, dual wall, not flame retarded, thick
                                and medium wall
310 EN 60684-3-271:2011         Flexible insulating sleeving -- Part 3: Specifications for NC      9    5 MECMA
                                individual types of sleeving -- Sheet 271: Heat-shrinkable
                                elastomer sleevings, flame retarded, fluid resistant,
                                shrink ratio 2:1
311 EN 60819-1:2012             Non-cellulosic papers for electrical purposes -- Part 1:     NC    7    5 MECMA
                                Definitions and general requirements
312 EN 60819-3-3:2011           Non-cellulosic papers for electrical purposes -- Part 3:     NC    7    5 MECMA
                                Specifications for individual materials -- Sheet 3: Unfilled
                                aramid (aromatic polyamide) papers
313 EN 60893-3-2:2004/A1:2011   Insulating materials - Industrial rigid laminated sheets NC        8    5 MECMA
                                based on thermosetting resins for electrical purposes --
                                Part 3-2: Specifications for individual materials -
                                Requirements for rigid laminated sheets based on epoxy
                                resins
314 EN 60893-3-3:2004/A1:2012   Insulating materials - Industrial rigid laminated sheets     NC    3    5 MECMA
                                based on thermosetting resins for electrical purposes --
                                Part 3-3: Specifications for individual materials -
                                Requirements for rigid laminated sheets based on
                                melamine resins
315 EN 62631-1:2011             Dielectric and resistive properties of solid insulating      NC    16   5 MECMA
                                materials -- Part 1: General
316 EN 61869-3:2011             Instrument transformers -- Part 3: Additional                NC    26   8 MECMA
                                requirements for inductive voltage transformers
317 EN 61869-5:2011             Instrument transformers -- Part 5: Additional                NC    47   8 MECMA
                                requirements for capacitor voltage transformers
318 EN 62271-1:2008/A1:2011     High-voltage switchgear and controlgear -- Part 1:          NC    3    8 MECMA
                                Common specifications
319 EN 62271-102:2002/A1:2011   High-voltage switchgear and controlgear -- Part 102:        NC   14    8 MECMA
                                Alternating current disconnectors and earthing switches

320 EN 62271-103:2011           High-voltage switchgear and controlgear -- Part 103:        NC   67    8 MECMA
                                Switches for rated voltages above 1 kV up to and
                                including 52 kV
321 EN 62271-106:2011           High-voltage switchgear and controlgear -- Part 106:        NC   82    8 MECMA
                                Alternating current contactors, contactor-based
                                controllers and motor-starters
322 EN 62271-200:2012           High-voltage switchgear and controlgear -- Part 200: AC     NC   99    8 MECMA
                                metal-enclosed switchgear and controlgear for rated
                                voltages above 1 kV and up to and including 52 kV

323 EN 62271-203:2012           High-voltage switchgear and controlgear -- Part 203: Gas- NC     77    8 MECMA
                                insulated metal-enclosed switchgear for rated voltages
                                above 52 kV
324 EN 62271-204:2011           High-voltage switchgear and controlgear -- Part 204:        NC   56    8 MECMA
                                Rigid gas-insulated transmission lines for rated voltage
                                above 52 kV
325 EN 60947-3:2009/A1:2012     Low-voltage switchgear and controlgear -- Part 3:       NC        8    9 MECMA
                                Switches, disconnectors, switch-disconnectors and fuse-
                                combination units
326 EN 60947-4-2:2012           Low-voltage switchgear and controlgear -- Part 4-2:    NC        84    9 MECMA
                                Contactors and motor-starters - AC semiconductor motor
                                controllers and starters
327 EN 60947-4-3:2000/A2:2011   Low-voltage switchgear and controlgear -- Part 4-3:         NC    9    9 MECMA
                                Contactors and motor-starters - AC semiconductor
                                controllers and contactors for non-motor loads

328 EN 60947-8:2003/A2:2012     Low-voltage switchgear and controlgear -- Part 8: Control NC      9    9 MECMA
                                units for built-in thermal protection (PTC) for rotating
                                electrical machines
329 EN 61439-1:2011             Low-voltage switchgear and controlgear assemblies --        NC   146   9 MECMA
                                Part 1: General rules
330 EN 61439-2:2011             Low-voltage switchgear and controlgear assemblies --        NC   19    9 MECMA
                                Part 2: Power switchgear and controlgear assemblies

331 EN 61439-3:2012             Low-voltage switchgear and controlgear assemblies --        NC   24    9 MECMA
                                Part 3: Distribution boards intended to be operated by
                                ordinary persons (DBO)
332 EN 61915-2:2012             Low-voltage switchgear and controlgear - Device profiles NC      22    9 MECMA
                                for networked industrial devices -- Part 2: Root device
                                profiles for starters and similar equipment

333 EN 50557:2011               Requirements for automatic reclosing devices (ARDs) for NC       43    11 MECMA
                                circuit breakers-RCBOs-RCCBs for household and
                                similar uses
334 EN 60309-2:1999/A2:2012     Plugs, socket-outlets and couplers for industrial purposes NC     4    11 MECMA
                                -- Part 2: Dimensional interchangeability requirements for
                                pin and contact-tube accessories
335 EN 60309-4:2007/A1:2012     Plugs, socket-outlets and couplers for industrial purposes NC     3    11 MECMA
                                -- Part 4: Switched socket-outlets and connectors with or
                                without interlock
336 EN 61008-1:2004/A13:2012    Residual current operated circuit-breakers without          NC    2    11 MECMA
                                integral overcurrent protection for household and similar
                                uses (RCCB's) -- Part 1: General rules
337 EN 61009-1:2004/A14:2012    Residual current operated circuit-breakers with integral    NC    2    11 MECMA
                                overcurrent protection for household and similar uses
                                (RCBO's) -- Part 1: General rules
338 EN 61386-25:2011           Conduit systems for cable management -- Part 25:             NC   12   11 MECMA
                               Particular requirements - Conduit fixing devices
339 EN 61534-1:2011            Powertrack systems -- Part 1: General requirements           NC   58   11 MECMA

340 EN 62196-1:2012            Plugs, socket-outlets, vehicle connectors and vehicle        NC   70   11 MECMA
                               inlets - Conductive charging of electric vehicles -- Part 1:
                               General requirements
341 EN 62196-2:2012            Plugs, socket-outlets, vehicle connectors and vehicle        NC   19   11 MECMA
                               inlets - Conductive charging of electric vehicles -- Part 2:
                               Dimensional compatibility and interchangeability
                               requirements for a.c. pin and contact-tube accessories

342 EN 62549:2011              Articulated systems and flexible systems for cable           NC   29   11 MECMA
                               guiding
343 EN 60127-1:2006/A1:2011    Miniature fuses -- Part 1: Definitions for miniature fuses   NC   2    12 MECMA
                               and general requirements for miniature fuse-links

344 EN 60671:2011              Nuclear power plants - Instrumentation and control        NC      31   16 MECMA
                               systems important to safety - Surveillance testing
345 EN 60965:2011              Nuclear power plants - Control rooms - Supplementary      NC      21   16 MECMA
                               control points for reactor shutdown without access to the
                               main control room
346 EN 61500:2011              Nuclear power plants - Instrumentation and control           NC   18   16 MECMA
                               important to safety - Data communication in systems
                               performing category A functions
347 EN 62244:2011              Radiation protection instrumentation - Installed radiation   NC   32   16 MECMA
                               monitors for the detection of radioactive and special
                               nuclear materials at national borders
348 EN 62327:2011              Radiation protection instrumentation - Hand-held             NC   30   16 MECMA
                               instruments for the detection and identification of
                               radionuclides and for the indication of ambient dose
                               equivalent rate from photon radiation
349 EN 62363:2011              Radiation protection instrumentation - Portable photon     NC     33   16 MECMA
                               contamination meters and monitors
350 EN 62387-1:2012            Radiation protection instrumentation - Passive integrating NC     77   16 MECMA
                               dosimetry systems for environmental and personal
                               monitoring -- Part 1: General characteristics and
                               performance requirements
351 EN 60191-6-12:2011         Mechanical standardization of semiconductor devices -- NC         10   17 MECMA
                               Part 6-12: General rules for the preparation of outline
                               drawings of surface mounted semiconductor device
                               packages - Design guidelines for fine-pitch land grid array
                               (FLGA)
352 EN 60747-15:2012           Semiconductor devices - Discrete devices -- Part 15:         NC   22   17 MECMA
                               Isolated power semiconductor devices
353 EN 60749-21:2011           Semiconductor devices - Mechanical and climatic test         NC   17   17 MECMA
                               methods -- Part 21: Solderability
354 EN 60749-29:2011           Semiconductor devices - Mechanical and climatic test         NC   21   17 MECMA
                               methods -- Part 29: Latch-up test
355 EN 60749-30:2005/A1:2011   Semiconductor devices - Mechanical and climatic test         NC   4    17 MECMA
                               methods -- Part 30: Preconditioning of non-hermetic
                               surface mount devices prior to reliability testing

356 EN 60749-40:2011           Semiconductor devices - Mechanical and climatic test     NC       14   17 MECMA
                               methods -- Part 40: Board level drop test method using a
                               strain gauge
357 EN 60749-7:2011            Semiconductor devices - Mechanical and climatic test         NC   11   17 MECMA
                               methods -- Part 7: Internal moisture content
                               measurement and the analysis of other residual gases
358 EN 61747-5-2:2011   Liquid crystal display devices -- Part 5-2: Environmental,   NC   11   17 MECMA
                        endurance and mechanical test methods - Visual
                        inspection of active matrix colour liquid crystal display
                        modules
359 EN 61747-6-2:2011   Liquid crystal display devices -- Part 6-2: Measuring        NC   50   17 MECMA
                        methods for liquid crystal display modules - Reflective
                        type
360 EN 61747-6-3:2011   Liquid crystal display devices -- Part 6-3: Measuring        NC   18   17 MECMA
                        methods for liquid crystal display modules - Motion
                        artifact measurement of active matrix liquid crystal
                        display modules
361 EN 61967-8:2011     Integrated circuits - Measurement of electromagnetic     NC       15   17 MECMA
                        emissions -- Part 8: Measurement of radiated emissions -
                        IC stripline method
362 EN 61988-1:2011     Plasma display panels -- Part 1: Terminology and letter      NC   38   17 MECMA
                        symbols
363 EN 61988-2-1:2012   Plasma display panels -- Part 2-1: Measuring methods -       NC   27   17 MECMA
                        Optical and optoelectrical
364 EN 61988-2-4:2011   Plasma display panels -- Part 2-4: Measuring methods -       NC   27   17 MECMA
                        Visual quality: Image artifacts
365 EN 62047-10:2011    Semiconductor devices - Micro-electromechanical              NC   10   17 MECMA
                        devices -- Part 10: Micro-pillar compression test for
                        MEMS materials
366 EN 62047-12:2011    Semiconductor devices - Micro-electromechanical            NC     25   17 MECMA
                        devices -- Part 12: Bending fatigue testing method of thin
                        film materials using resonant vibration of MEMS
                        structures
367 EN 62047-13:2012    Semiconductor devices - Micro-electromechanical           NC      13   17 MECMA
                        devices -- Part 13: Bend- and shear- type test methods of
                        measuring adhesive strength for MEMS structures

368 EN 62047-14:2012    Semiconductor devices - Micro-electromechanical              NC   12   17 MECMA
                        devices -- Part 14: Forming limit measuring method of
                        metallic film materials
369 EN 62047-5:2011     Semiconductor devices - Micro-electromechanical              NC   26   17 MECMA
                        devices -- Part 5: RF MEMS switches
370 EN 62047-7:2011     Semiconductor devices - Micro-electromechanical              NC   20   17 MECMA
                        devices -- Part 7: MEMS BAW filter and duplexer for
                        radio frequency control and selection
371 EN 62047-9:2011     Semiconductor devices - Micro-electromechanical              NC   19   17 MECMA
                        devices -- Part 9: Wafer to wafer bonding strength
                        measurement for MEMS
372 EN 62258-2:2011     Semiconductor die products -- Part 2: Exchange data          NC   66   17 MECMA
                        formats
373 EN 62341-6-2:2012   Organic light emitting diode (OLED) displays -- Part 6-2:    NC   43   17 MECMA
                        Measuring methods of visual quality and ambient
                        performance
374 EN 62595-1-2:2012   LCD backlight unit -- Part 1-2: Terminology and letter       NC   17   17 MECMA
                        symbols
375 EN 61837-2:2011     Surface mounted piezoelectric devices for frequency          NC   13   18 MECMA
                        control and selection - Standard outlines and terminal
                        lead connections -- Part 2: Ceramic enclosures

376 EN 62604-2:2012     Surface Acoustic Wave (SAW) and Bulk Acoustic Wave           NC   14   18 MECMA
                        (BAW) duplexers of assessed quality -- Part 2:
                        Guidelines for the use
377 EN 16247-1:2012     Energy audits - Part 1: General requirements                 NC   11   19 MECMA
378 EN 60068-3-1:2011   Environmental testing -- Part 3-1: Supporting                NC   11   19 MECMA
                        documentation and guidance - Cold and dry heat tests

379 EN 62474:2012       Material declaration for products of and for the             NC   48   19 MECMA
                        electrotechnical industry
380 EN 60851-5:2008/A1:2011   Winding wires - Test methods -- Part 5: Electrical       NC    6    21 MECMA
                              properties
381 EN ISO 11354-1:2011       Advanced automation technologies and their applications NC    37    23 MECMA
                              - Requirements for establishing manufacturing enterprise
                              process interoperability - Part 1: Framework for
                              enterprise interoperability (ISO 11354-1:2011)

382 EN 60534-8-2:2011         Industrial-process control valves -- Part 8-2: Noise     NC   17    23 MECMA
                              considerations - Laboratory measurement of noise
                              generated by hydrodynamic flow through control valves

383 EN 61158-3-12:2012        Industrial communication networks - Fieldbus             NC   36    23 MECMA
                              specifications -- Part 300: Data-link layer service
                              definition
384 EN 61158-3-14:2012        Industrial communication networks - Fieldbus             NC   18    23 MECMA
                              specifications - Part 3-14: Data-link layer service
                              definition - Type 14 elements
385 EN 61158-3-19:2012        Industrial communication networks - Fieldbus             NC   21    23 MECMA
                              specifications -- Part 3-19: Data-link layer service
                              definition - Type 19 elements
386 EN 61158-3-21:2012        Industrial communication networks - Fieldbus             NC   36    23 MECMA
                              specifications -- Part 3-21: Data-link layer service
                              definition - Type 21 elements
387 EN 61158-3-22:2012        Industrial communication networks - Fieldbus             NC   26    23 MECMA
                              specifications -- Part 3-22: Data-link layer service
                              definition - Type 22 elements
388 EN 61158-4-11:2012        Industrial communication networks - Fieldbus             NC   127   23 MECMA
                              specifications -- Part 4-11: Data-link layer protocol
                              specification - Type 11 elements
389 EN 61158-4-12:2012        Industrial communication networks - Fieldbus             NC   105   23 MECMA
                              specifications -- Part 4-12: Data-link layer protocol
                              specification - Type 12 elements
390 EN 61158-4-14:2012        Industrial communication networks - Fieldbus             NC   28    23 MECMA
                              specifications -- Part 4-14: Data-link layer protocol
                              specification - Type 14 elements
391 EN 61158-4-18:2012        Industrial communication networks - Fieldbus             NC   32    23 MECMA
                              specifications -- Part 4-18: Data-link layer protocol
                              specification - Type 18 elements
392 EN 61158-4-19:2012        Industrial communication networks - Fieldbus             NC   104   23 MECMA
                              specifications -- Part 4-19: Data-link layer protocol
                              specification - Type 19 elements
393 EN 61158-4-2:2012         Industrial communication networks - Fieldbus             NC   282   23 MECMA
                              specifications -- Part 400: Data-link layer protocol
                              specification
394 EN 61158-4-21:2012        Industrial communication networks - Fieldbus             NC   79    23 MECMA
                              specifications -- Part 4-21: Data-link layer protocol
                              specification - Type 21 elements
395 EN 61158-4-22:2012        Industrial communication networks - Fieldbus             NC   45    23 MECMA
                              specifications -- Part 4-22: Data-link layer protocol
                              specification - Type 22 elements
396 EN 61158-4-3:2012         Industrial communication networks - Fieldbus             NC   149   23 MECMA
                              specifications -- Part 4-3: Data-link layer protocol
                              specification - Type 3 elements
397 EN 61158-5-10:2012        Industrial communication networks - Fieldbus             NC   698   23 MECMA
                              specifications -- Part 5-10: Application layer service
                              definition - Type 10 elements
398 EN 61158-5-12:2012        Industrial communication networks - Fieldbus             NC   85    23 MECMA
                              specifications -- Part 5-12: Application layer service
                              definition - Type 12 elements
399 EN 61158-5-14:2012        Industrial communication networks - Fieldbus             NC   74    23 MECMA
                              specifications -- Part 5-14: Application layer service
                              definition - Type 14 elements
400 EN 61158-5-15:2012   Industrial communication networks - Fieldbus              NC   120   23 MECMA
                         specifications -- Part 5-15: Application layer service
                         definition - Type 15 elements
401 EN 61158-5-18:2012   Industrial communication networks - Fieldbus              NC   31    23 MECMA
                         specifications -- Part 5-18: Application layer service
                         definition - Type 18 elements
402 EN 61158-5-19:2012   Industrial communication networks - Fieldbus              NC   28    23 MECMA
                         specifications -- Part 5-19: Application layer service
                         definition - Type 19 elements
403 EN 61158-5-2:2012    Industrial communication networks - Fieldbus              NC   171   23 MECMA
                         specifications -- Part 5-2: Application layer service
                         definition - Type 2 elements
404 EN 61158-5-20:2012   Industrial communication networks - Fieldbus              NC   40    23 MECMA
                         specifications -- Part 5-20: Application layer service
                         definition - Type 20 elements
405 EN 61158-5-21:2012   Industrial communication networks - Fieldbus              NC   66    23 MECMA
                         specifications -- Part 5-21: Application layer service
                         definition - Type 21 elements
406 EN 61158-5-22:2012   Industrial communication networks - Fieldbus              NC   60    23 MECMA
                         specifications -- Part 5-22: Application layer service
                         definition - Type 22 elements
407 EN 61158-5-3:2012    Industrial communication networks - Fieldbus              NC   347   23 MECMA
                         specifications -- Part 5-3: Application layer service
                         definition - Type 3 elements
408 EN 61158-6-10:2012   Industrial communication networks - Fieldbus              NC   552   23 MECMA
                         specifications - Part 6-10: Application layer protocol
                         specification - Type 10 elements
409 EN 61158-6-12:2012   Industrial communication networks - Fieldbus              NC   109   23 MECMA
                         specifications - Part 6-12: Application layer protocol
                         specification - Type 12 elements
410 EN 61158-6-14:2012   Industrial communication networks - Fieldbus              NC   69    23 MECMA
                         specifications - Part 6-14: Application layer protocol
                         specification - Type 14 elements
411 EN 61158-6-15:2012   Industrial communication networks - Fieldbus              NC   94    23 MECMA
                         specifications - Part 6-15: Application layer protocol
                         specification - Type 15 elements
412 EN 61158-6-18:2012   Industrial communication networks - Fieldbus              NC   47    23 MECMA
                         specifications - Part 6-18: Application layer protocol
                         specification - Type 18 elements
413 EN 61158-6-19:2012   Industrial communication networks - Fieldbus              NC   23    23 MECMA
                         specifications - Part 6-19: Application layer protocol
                         specification - Type 19 elements
414 EN 61158-6-2:2012    Industrial communication networks - Fieldbus              NC   246   23 MECMA
                         specifications - Part 6-2: Application layer protocol
                         specification - Type 2 elements
415 EN 61158-6-20:2012   Industrial communication networks - Fieldbus              NC   46    23 MECMA
                         specifications - Part 6-20: Application layer protocol
                         specification - Type 20 elements
416 EN 61158-6-21:2012   Industrial communication networks - Fieldbus              NC   39    23 MECMA
                         specifications - Part 6-21: Application layer protocol
                         specification - Type 21 elements
417 EN 61158-6-22:2012   Industrial communication networks - Fieldbus              NC   57    23 MECMA
                         specifications -- Part 6-22: Application layer protocol
                         specification - Type 22 elements
418 EN 61158-6-3:2012    Industrial communication networks - Fieldbus              NC   334   23 MECMA
                         specifications - Part 6-3: Application layer protocol
                         specification - Type 3 elements
419 EN 61158-6-9:2012    Industrial communication networks - Fieldbus              NC   80    23 MECMA
                         specifications - Part 6-9: Application layer protocol
                         specification - Type 9 elements
420 EN 61784-3-18:2011          Industrial communication networks - Profiles -- Part 3-18: NC       49    23 MECMA
                                Functional safety fieldbuses - Additional specifications for
                                CPF 18
421 EN 61784-5-10:2012          Industrial communication networks - Profiles -- Part 5-10: NC       14    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 10

422 EN 61784-5-11:2012          Industrial communication networks - Profiles -- Part 5-11: NC       19    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 11

423 EN 61784-5-12:2012          Industrial communication networks - Profiles -- Part 5-12: NC       15    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 12

424 EN 61784-5-14:2012          Industrial communication networks - Profiles -- Part 5-14: NC       20    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 14

425 EN 61784-5-15:2012          Industrial communication networks - Profiles -- Part 5-15: NC       16    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 15

426 EN 61784-5-2:2012           Industrial communication networks - Profiles -- Part 5-2:      NC   105   23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 2

427 EN 61784-5-3:2012           Industrial communication networks - Profiles -- Part 5-3:      NC   84    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 3

428 EN 61784-5-4:2012           Industrial communication networks - Profiles -- Part 5-4:      NC   20    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 4

429 EN 61784-5-6:2012           Industrial communication networks - Profiles -- Part 5-6:      NC   33    23 MECMA
                                Installation of fieldbuses - Installation profiles for CPF 6

430 EN 62264-5:2012             Enterprise system integration -- Part 5: Business to           NC   92    23 MECMA
                                manufacturing transactions
431 EN 62337:2012               Commissioning of electrical, instrumentation and control       NC   37    23 MECMA
                                systems in the process industry - Specific phases and
                                milestones
432 EN 62381:2012               Automation systems in the process industry - Factory           NC   21    23 MECMA
                                acceptance test (FAT), site acceptance test (SAT) and
                                site integration test (SIT)
433 EN 62439-4:2010/A1:2012     Industrial communication networks - High availability          NC    4    23 MECMA
                                automation networks -- Part 4: Cross-network
                                Redundancy Protocol (CRP)
434 EN 62439-7:2012             Industrial communication networks - High availability          NC   65    23 MECMA
                                automation networks -- Part 7: Ring-based Redundancy
                                Protocol (RRP)
435   EN 62541-4:2011           OPC unified architecture -- Part 4: Services                   NC   212   23   MECMA
436   EN 62541-5:2011           OPC unified architecture -- Part 5: Information model          NC   106   23   MECMA
437   EN 62541-6:2011           OPC unified architecture -- Part 6: Mappings                   NC    70   23   MECMA
438   EN 62541-8:2011           OPC unified architecture -- Part 8: Data Access                NC    15   23   MECMA
439   EN 60118-15:2012          Electroacoustics - Hearing aids -- Part 15: Methods for        NC    30   26   MECMA
                                characterising signal processing in hearing aids with a
                                speech-like signal
440 EN 50130-5:2011             Alarm systems -- Part 5: Environmental test methods            NC   28    27 MECMA

441 EN 50132-5-1:2011           Alarm systems - CCTV surveillance systems for use in           NC   69    27 MECMA
                                security applications -- Part 5-1: Video transmission -
                                General video transmission performance requirements

442 EN 50132-5-1:2011/AC:2012   Alarm systems - CCTV surveillance systems for use in           ER    1    27 MECMA
                                security applications -- Part 5-1: Video transmission -
                                General video transmission performance requirements
443 EN 50132-5-2:2011                   Alarm systems - CCTV surveillance systems for use in           NC   497   27 MECMA
                                        security applications -- Part 5-2: IP Video Transmission
                                        Protocols
444 EN 50132-5-2:2011/AC:2012           Alarm systems - CCTV surveillance systems for use in           ER    1    27 MECMA
                                        security applications -- Part 5-2: IP Video Transmission
                                        Protocols
445 EN 50136-1:2012                     Alarm systems - Alarm transmission systems and                 NC   24    27 MECMA
                                        equipment -- Part 1: General requirements for alarm
                                        transmission systems
446 EN 55016-4-2:2011                   Specification for radio disturbance and immunity               NC   61    30 MECMA
                                        measuring apparatus and methods -- Part 4-2:
                                        Uncertainties, statistics and limit modelling -
                                        Measurement instrumentation uncertainty
447 EN 55017:2011                       Methods of measurement of the suppression                 NC        41    30 MECMA
                                        characteristics of passive EMC filtering devices
448 EN 61000-4-25:2002/A1:2012          Electromagnetic compatibility (EMC) -- Part 4-25: Testing NC         7    30 MECMA
                                        and measurement techniques - HEMP immunity test
                                        methods for equipment and systems
449 EN 61000-6-3:2007/A1:2011/AC:2012   Electromagnetic compatibility (EMC) -- Part 6-3: Generic ER          1    30 MECMA
                                        standards - Emission standard for residential,
                                        commercial and light-industrial environments

450 EN 60676:2012                       Industrial electroheating equipment - Test methods for         NC   17    31 MECMA
                                        direct arc furnaces
451 EN 60683:2012                       Industrial electroheating equipment - Test methods for         NC   14    31 MECMA
                                        submerged-arc furnaces
452 EN 61307:2011                       Industrial microwave heating installations - Test methods      NC   14    31 MECMA
                                        for the determination of power output
453 EN 60695-6-2:2011                   Fire hazard testing -- Part 6-2: Smoke obscuration -           NC   31    33 MECMA
                                        Summary and relevance of test methods
454 EN 60695-7-2:2011                   Fire hazard testing -- Part 7-2: Toxicity of fire effluent -   NC   51    33 MECMA
                                        Summary and relevance of test methods
455 EN 60695-7-3:2011                   Fire hazard testing -- Part 7-3: Toxicity of fire effluent -   NC   34    33 MECMA
                                        Use and interpretation of test results
456 EN 61788-11:2011                    Superconductivity -- Part 11: Residual resistance ratio        NC   21    34 MECMA
                                        measurement - Residual resistance ratio of Nb3Sn
                                        composite superconductors
457 EN 61788-15:2011                    Superconductivity -- Part 15: Electronic characteristic        NC   38    34 MECMA
                                        measurements -- Intrinsic surface impedance of
                                        superconductor films at microwave frequencies

458 EN 61788-4:2011                     Superconductivity -- Part 4: Residual resistance ratio         NC   25    34 MECMA
                                        measurement - Residual resistance ratio of Nb-Ti
                                        composite superconductors
459 EN 61788-6:2011                     Superconductivity -- Part 6: Mechanical properties    NC            28    34 MECMA
                                        measurement - Room temperature tensile test of Cu/Nb-
                                        Ti composite superconductors
460 EN 50548:2011                       Junction boxes for photovoltaic modules                        NC   33    35 MECMA
461 EN 61701:2012                       Salt mist corrosion testing of photovoltaic (PV) modules       NC   14    35 MECMA

462 EN 61730-1:2007/A1:2012             Photovoltaic (PV) module safety qualification -- Part 1:       NC    5    35 MECMA
                                        Requirements for construction
463 EN 61730-2:2007/A1:2012             Photovoltaic (PV) module safety qualification -- Part 2:       NC    4    35 MECMA
                                        Requirements for testing
464 EN 62109-2:2011                     Safety of power converters for use in photovoltaic power       NC   39    35 MECMA
                                        systems -- Part 2: Particular requirements for inverters

465 EN 62253:2011                       Photovoltaic pumping systems - Design qualification and NC          22    35 MECMA
                                        performance measurements
466 EN 62509:2011                       Battery charge controllers for photovoltaic systems -   NC          25    35 MECMA
                                        Performance and functioning
467 EN 61148:2012                 Terminal markings for valve device stacks and              NC    17   36 MECMA
                                  assemblies and for power conversion equipment
468 EN 61954:2011                 Static VAR compensators (SVC) - Testing of thyristor       NC    44   36 MECMA
                                  valves
469 EN ISO 3581:2012              Welding consumables - Covered electrodes for manual        NC    27   39 MECMA
                                  metal arc welding of stainless and heat-resisting steels -
                                  Classification (ISO 3581:2003+Cor 1:2008+Amd 1:2011)

470 EN ISO 3690:2012              Welding and allied processes - Determination of             NC   25   39 MECMA
                                  hydrogen content in arc weld metal (ISO 3690:2012)

471 EN ISO 5172:2006/A1:2012      Gas welding equipment - Blowpipes for gas welding,          NC   4    39 MECMA
                                  heating and cutting - Specifications and tests -
                                  Amendment 1 (ISO 5172:2006/Amd 1:2012)
472 EN ISO 10863:2011             Non-destructive testing of welds - Ultrasonic testing - Use NC   21   39 MECMA
                                  of time-of-flight diffraction technique (TOFD) (ISO
                                  10863:2011)
473 EN ISO 10882-1:2011           Health and safety in welding and allied processes -         NC   35   39 MECMA
                                  Sampling of airborne particles and gases in the
                                  operator's breathing zone - Part 1: Sampling of airborne
                                  particles (ISO 10882-1:2011)
474 EN ISO 12153:2012             Welding consumables - Tubular cored electrodes for gas NC        9    39 MECMA
                                  shielded and non-gas shielded metal arc welding of
                                  nickel and nickel alloys - Classification (ISO 12153:2011)

475 EN ISO 13123:2011             Metallic and other inorganic coatings - Test method of      NC   12   39 MECMA
                                  cyclic heating for thermal-barrier coatings under
                                  temperature gradient (ISO 13123:2011)
476 EN ISO 13585:2012             Brazing - Qualification test of brazers and brazing         NC   14   39 MECMA
                                  operators (ISO 13585:2012)
477 EN ISO 14174:2012             Welding consumables - Fluxes for submerged arc              NC   16   39 MECMA
                                  welding and electroslag welding - Classification (ISO
                                  14174:2012)
478 EN ISO 14271:2011             Resistance welding - Vickers hardness testing (low-force NC      6    39 MECMA
                                  and microhardness) of resistance spot, projection, and
                                  seam welds (ISO 14271:2011)
479 EN ISO 14271:2011/AC:2012     Resistance welding - Vickers hardness testing (low-force ER      2    39 MECMA
                                  and microhardness) of resistance spot, projection, and
                                  seam welds - Technical Corrigendum 1 (ISO
                                  14271:2011/Cor 1:2012)
480 EN ISO 15011-5:2011           Health and safety in welding and allied processes -       NC     15   39 MECMA
                                  Laboratory method for sampling fume and gases - Part 5:
                                  Identification of thermal-degradation products generated
                                  when welding or cutting through products composed
                                  wholly or partly of organic materials using pyrolysis-gas
                                  chromatography-mass spectrometry (ISO 15011-5:2011)



481 EN ISO 15614-1:2004/A2:2012   Specification and qualification of welding procedures for   NC   4    39 MECMA
                                  metallic materials - Welding procedure test - Part 1: Arc
                                  and gas welding of steels and arc welding of nickel and
                                  nickel alloys - Amendment 2 (ISO 15614-1:2004/Amd
                                  2:2012)
482 EN ISO 15792-1:2008/A1:2011   Welding consumables - Test methods - Part 1: Test          NC    3    39 MECMA
                                  methods for all-weld metal test specimens in steel, nickel
                                  and nickel alloys (ISO 15792-1:2000/Amd 1:2011)

483 EN ISO 16834:2012             Welding consumables - Wire electrodes, wires, rods and NC        18   39 MECMA
                                  deposits for gas shielded arc welding of high strength
                                  steels - Classification (ISO 16834:2012)
484 EN ISO 17653:2012       Resistance welding - Destructive tests on welds in             NC   6    39 MECMA
                            metallic materials - Torsion test of resistance spot welds
                            (ISO 17653:2012)
485 EN ISO 18275:2012       Welding consumables - Covered electrodes for manual            NC   27   39 MECMA
                            metal arc welding of high-strength steels - Classification
                            (ISO 18275:2011)
486 EN ISO 21952:2012       Welding consumables - Wire electrodes, wires, rods and NC           17   39 MECMA
                            deposits for gas shielded arc welding of creep-resisting
                            steels - Classification (ISO 21952:2012)

487 EN ISO 22825:2012       Non-destructive testing of welds - Ultrasonic testing -        NC   22   39 MECMA
                            Testing of welds in austenitic steels and nickel-based
                            alloys (ISO 22825:2012)
488 EN ISO 24598:2012       Welding consumables - Solid wire electrodes, tubular           NC   20   39 MECMA
                            cored electrodes and electrode-flux combinations for
                            submerged arc welding of creep-resisting steels -
                            Classification (ISO 24598:2012)
489 EN ISO 25239-1:2011     Friction stir welding - Aluminium - Part 1: Vocabulary         NC   10   39 MECMA
                            (ISO 25239-1:2011)
490 EN ISO 25239-2:2011     Friction stir welding - Aluminium - Part 2: Design of weld     NC   6    39 MECMA
                            joints (ISO 25239-2:2011)
491 EN ISO 25239-3:2011     Friction stir welding - Aluminium - Part 3: Qualification of   NC   12   39 MECMA
                            welding operators (ISO 25239-3:2011)

492 EN ISO 25239-4:2011     Friction stir welding - Aluminium - Part 4: Specification      NC   18   39 MECMA
                            and qualification of welding procedures (ISO 25239-
                            4:2011)
493 EN ISO 25239-5:2011     Friction stir welding - Aluminium - Part 5: Quality and        NC   11   39 MECMA
                            inspection requirements (ISO 25239-5:2011)
494 EN ISO 26304:2011       Welding consumables - Solid wire electrodes, tubular           NC   22   39 MECMA
                            cored electrodes and electrode-flux combinations for
                            submerged arc welding of high strength steels -
                            Classification (ISO 26304:2011)
495 EN ISO 9712:2012        Non-destructive testing - Qualification and certification of NC     38   40 MECMA
                            NDT personnel (ISO 9712:2012)
496 EN ISO 11699-1:2011     Non-destructive testing - Industrial radiographic film -     NC     11   40 MECMA
                            Part 1: Classification of film systems for industrial
                            radiography (ISO 11699-1:2008)
497 EN ISO 11699-2:2011     Non-destructive testing - Industrial radiographic films -      NC   8    40 MECMA
                            Part 2: Control of film processing by means of reference
                            values (ISO 11699-2:1998)
498 EN 16016-1:2011         Non destructive testing - Radiation methods - Computed NC           5    40 MECMA
                            tomography - Part 1: Terminology
499 EN 16016-2:2011         Non destructive testing - Radiation methods - Computed NC           25   40 MECMA
                            tomography - Part 2: Principle, equipment and samples

500 EN 16016-3:2011         Non destructive testing - Radiation methods - Computed NC           22   40 MECMA
                            Tomography - Part 3: Operation and interpretation

501 EN 16016-4:2011         Non destructive testing - Radiation methods - Computed         NC   12   40 MECMA
                            tomography - Part 4: Qualification
502 EN 16018:2011           Non-destructive testing - Terminology - Terms used in          NC   8    40 MECMA
                            ultrasonic testing with phased arrays
503 EN 10169:2010+A1:2012   Continuously organic coated (coil coated) steel flat           NC   34   42 MECMA
                            products - Technical delivery conditions
504 EN ISO 26203-2:2011     Metallic materials - Tensile testing at high strain rates -    NC   18   42 MECMA
                            Part 2: Servo-hydraulic and other test systems (ISO
                            26203-2:2011)
505 EN ISO 2739:2012        Sintered metal bushings - Determination of radial              NC   5    46 MECMA
                            crushing strength (ISO 2739:2012)
506 EN 1370:2011            Founding - Examination of surface condition                    NC   8    47 MECMA
507 EN 1371-1:2011          Founding - Liquid penetrant testing- Part 1: Sand, gravity    NC   11   47 MECMA
                            die and low pressure die castings
508 EN 1559-3:2011          Founding - Technical conditions of delivery - Part 3:         NC   11   47 MECMA
                            Additional requirements for iron castings
509 EN 1561:2011            Founding - Grey cast irons                                    NC   22   47 MECMA
510 EN 1562:2012            Founding - Malleable cast irons                               NC   14   47 MECMA
511 EN 12680-3:2011         Founding - Ultrasonic testing - Part 3: Spheroidal graphite   NC   14   47 MECMA
                            cast iron castings
512 EN 13835:2012           Founding - Austenitic cast irons                              NC   22   47 MECMA
513 EN 16079:2011           Founding - Compacted (vermicular) graphite cast irons         NC   17   47 MECMA

514 EN 16124:2011           Founding - Low-alloyed ferritic spheroidal graphite cast      NC   20   47 MECMA
                            irons for elevated temperature applications
515 EN ISO 7010:2012        Graphical symbols - Safety colours and safety signs -         NC   52   55 MECMA
                            Registered safety signs (ISO 7010:2011)
516 EN ISO 10209:2012       Technical product documentation - Vocabulary - Terms          NC   47   55 MECMA
                            relating to technical drawings, product definition and
                            related documentation (ISO 10209:2012)

517 EN ISO/IEC 17024:2012   Conformity assessment - General requirements for              NC   28   56 MECMA
                            bodies operating certification of persons (ISO/IEC
                            17024:2012)
518 EN ISO 1119:2011        Geometrical product specifications (GPS) - Series of          NC   7    58 MECMA
                            conical tapers and taper angles (ISO 1119:2011)
519 EN ISO 5459:2011        Geometrical product specifications (GPS) - Geometrical        NC   61   58 MECMA
                            tolerancing - Datums and datum systems (ISO
                            5459:2011)
520 EN ISO 13225:2012       Geometrical product specifications (GPS) - Dimensional        NC   15   58 MECMA
                            measuring equipment; Height gauges - Design and
                            metrological characteristics (ISO 13225:2012)

521 EN ISO 14405-2:2011     Geometrical product specifications (GPS) - Dimensional        NC   14   58 MECMA
                            tolerancing - Part 2: Dimensions other than linear sizes
                            (ISO 14405-2:2011)
522 EN ISO 15530-3:2011     Geometrical product specifications (GPS) - Coordinate         NC   20   58 MECMA
                            measuring machines (CMM): Technique for determining
                            the uncertainty of measurement - Part 3: Use of
                            calibrated workpieces or measurement standards (ISO
                            15530-3:2011)
523 EN ISO 16610-21:2012    Geometrical product specifications (GPS) - Filtration -       NC   12   58 MECMA
                            Part 21: Linear profile filters: Gaussian filters (ISO 16610-
                            21:2011)
524 EN ISO 17450-1:2011     Geometrical product specifications (GPS) - General         NC      37   58 MECMA
                            concepts - Part 1: Model for geometrical specification and
                            verification (ISO 17450-1:2011)
525 EN ISO 22432:2011       Geometrical product specifications (GPS) - Features         NC     26   58 MECMA
                            utilized in specification and verification (ISO 22432:2011)

526 EN ISO 25178-2:2012     Geometrical product specifications (GPS) - Surface            NC   36   58 MECMA
                            texture: Areal - Part 2: Terms, definitions and surface
                            texture parameters (ISO 25178-2:2012)
527 EN ISO 25178-3:2012     Geometrical product specifications (GPS) - Surface            NC   13   58 MECMA
                            texture: Areal - Part 3: Specification operators (ISO
                            25178-3:2012)
528 EN ISO 898-2:2012       Mechanical properties of fasteners made of carbon steel       NC   19   59 MECMA
                            and alloy steel - Part 2: Nuts with specified property
                            classes - Coarse thread and fine pitch thread (ISO 898-
                            2:2012)
529 EN ISO 898-5:2012         Mechanical properties of fasteners made of carbon steel     NC    15   59 MECMA
                              and alloy steel - Part 5: Set screws and similar threaded
                              fasteners with specified hardness classes - Coarse
                              thread and fine pitch thread (ISO 898-5:2012)

530 EN ISO 1207:2011          Slotted cheese head screws - Product grade A (ISO           NC    5    59 MECMA
                              1207:2011)
531 EN ISO 1479:2011          Hexagon head tapping screws (ISO 1479:2011)                 NC    4    59 MECMA
532 EN ISO 1481:2011          Slotted pan head tapping screws (ISO 1481:2011)             NC    4    59 MECMA
533 EN ISO 1482:2011          Slotted countersunk (flat) head tapping screws (ISO         NC    4    59 MECMA
                              1482:2011)
534 EN ISO 1483:2011          Slotted raised countersunk (oval) head tapping screws       NC    4    59 MECMA
                              (ISO 1483:2011)
535 EN ISO 1580:2011          Slotted pan head screws - Product grade A (ISO              NC    5    59 MECMA
                              1580:2011)
536 EN ISO 2009:2011          Slotted countersunk flat head screws - Product grade A      NC    5    59 MECMA
                              (ISO 2009:2011)
537 EN ISO 2010:2011          Slotted raised countersunk head screws - Product grade      NC    5    59 MECMA
                              A (ISO 2010:2011)
538 EN ISO 4753:2011          Fasteners - Ends of parts with external ISO metric thread   NC    4    59 MECMA
                              (ISO 4753:2011)
539 EN ISO 4766:2011          Slotted set screws with flat point (ISO 4766:2011)          NC    4    59 MECMA
540 EN ISO 7045:2011          Pan head screws with type H or type Z cross recess -        NC    5    59 MECMA
                              Product grade A (ISO 7045:2011)
541 EN ISO 7046-1:2011        Countersunk flat head screws (common head style) with       NC    5    59 MECMA
                              type H or type Z cross recess - Product grade A - Part 1:
                              Steel screws of property class 4.8 (ISO 7046-1:2011)

542 EN ISO 7046-2:2011        Countersunk flat head screws (common head style) with NC          6    59 MECMA
                              type H or type Z cross recess - Product grade A - Part 2:
                              Steel screws of property class 8.8, stainless steel screws
                              and non-ferrous metal screws (ISO 7046-2:2011)

543 EN ISO 7047:2011          Raised countersunk head screws (common head style)          NC    5    59 MECMA
                              with type H or type Z cross recess - Product grade A
                              (ISO 7047:2011)
544 EN ISO 7049:2011          Cross-recessed pan head tapping screws (ISO/FDIS            NC    4    59 MECMA
                              7049:2011)
545 EN ISO 7050:2011          Cross-recessed countersunk (flat) head tapping screws       NC    4    59 MECMA
                              (ISO 7050:2011)
546 EN ISO 7051:2011          Cross-recessed raised countersunk (oval) head tapping       NC    4    59 MECMA
                              screws (ISO 7051:2011)
547 EN ISO 7053:2011          Hexagon washer head tapping screws (ISO 7053:2011)          NC    4    59 MECMA

548 EN ISO 7380-1:2011        Button head screws - Part 1: Hexagon socket button          NC    7    59 MECMA
                              head screws (ISO 7380-1:2011)
549 EN ISO 7380-2:2011        Button head screws - Part 2: Hexagon socket button          NC    6    59 MECMA
                              head screws with collar (ISO 7380-2:2011)
550 EN 1069-1:2010/AC:2012    Water slides - Part 1: Safety requirements and test         ER    1    66 MECMA
                              methods
551 EN ISO 5912:2011          Camping tents (ISO 5912:2011)                               NC    20   66 MECMA
552 EN 13451-1:2011           Swimming pool equipment - Part 1: General safety            NC    23   66 MECMA
                              requirements and test methods
553 EN 13451-3:2011           Swimming pool equipment - Part 3: Additional specific       NC    20   66 MECMA
                              safety requirements and test methods for inlets and
                              outlets and water/air based water leisure features

554 EN 13537:2012             Requirements for sleeping bags                               NC   25   66 MECMA
555 EN 15649-1:2009+A1:2012   Floating leisure articles for use on and in the water - Part NC   24   66 MECMA
                              1: Classification, materials, general requirements and
                              test methods
556 EN 15649-2:2009+A1:2012      Floating leisure articles for use on and in the water - Part NC      11   66 MECMA
                                 2: Consumer information
557 EN 15649-3:2009+A1:2012      Floating leisure articles for use on and in the water - Part NC      18   66 MECMA
                                 3: Additional specific safety requirements and test
                                 methods for Class A devices
558 EN 15649-4:2010+A1:2012      Floating leisure articles for use on and in the water - Part NC      23   66 MECMA
                                 4: Additional specific safety requirements and test
                                 methods for Class B devices
559 EN 16051-1:2012              Inflation devices and accessories for inflatable consumer NC         6    66 MECMA
                                 products - Part 1: Compatibility of valves and valve
                                 adapters
560 EN 16051-2:2012              Inflation devices and accessories for inflatable consumer NC         5    66 MECMA
                                 products - Part 2: Safety requirements, durability,
                                 performance, compatibility and test methods of inflators

561 EN 16083:2012                Paddles and oars for recreational boats - Safety                NC   4    66 MECMA
                                 requirements and test methods
562 EN ISO 8224-1:2003/A1:2011   Traveller irrigation machines - Part 1: Operational             NC   3    77 MECMA
                                 characteristics and laboratory and field test methods -
                                 Amendment 1 (ISO 8224-1:2003/AMD 1:2011)

563 EN 13739-1:2011              Agricultural machinery - Solid fertilizer broadcasters and      NC   10   77 MECMA
                                 full width distributors - Environmental protection - Part 1:
                                 Requirements
564 EN 13739-2:2011              Agricultural machinery - Solid fertilizer broadcasters and      NC   23   77 MECMA
                                 full width distributors - Environmental protection - Part 2:
                                 Test methods
565 EN 13739-2:2011/AC:2012      Agricultural machinery - Solid fertilizer broadcasters and      ER   1    77 MECMA
                                 full width distributors - Environmental protection - Part 2:
                                 Test methods
566 EN 1645-1:2012               Leisure accommodation vehicles - Caravans - Part 1:             NC   31   78 MECMA
                                 Habitation requirements relating to health and safety

567 EN 1646-1:2012               Leisure accommodation vehicles - Motor caravans - Part NC            27   78 MECMA
                                 1: Habitation requirements relating to health and safety

568 EN 1647:2012                 Leisure accommodation vehicles - Caravan holiday                NC   26   78 MECMA
                                 homes - Habitation requirements relating to health and
                                 safety
569 EN 1648-1:2012               Leisure accommodation vehicles - 12 V direct current            NC   14   78 MECMA
                                 extra low voltage electrical installations - Part 1:
                                 Caravans
570 EN 1648-2:2012               Leisure accommodation vehicles - 12 V direct current            NC   12   78 MECMA
                                 extra low voltage electrical installations - Part 2: Motor
                                 caravans
571 EN 15194:2009+A1:2011        Cycles - Electrically power assisted cycles - EPAC      NC           28   78 MECMA
                                 Bicycles
572 EN 15918:2011                Cycles - Cycle trailer - Safety requirements and test   NC           20   78 MECMA
                                 methods
573 EN ISO 9856:2003/A1:2012     Conveyor belts - Determination of elastic and permanent NC           3    84 MECMA
                                 elongation and calculation of elastic modulus (ISO
                                 9856:2003/Amd 1:2012)
574 EN 81-21:2009+A1:2012        Safety rules for the construction and installation of lifts -   NC   33   85 MECMA
                                 Lifts for the transport of persons and goods - Part 21:
                                 New passenger and goods passenger lifts in existing
                                 building
575 EN ISO 3691-1:2012           Industrial trucks - Safety requirements and verification -      NC   54   85 MECMA
                                 Part 1: Self-propelled industrial trucks, other than
                                 driverless trucks, variable-reach trucks and burden-
                                 carrier trucks (ISO 3691-1:2011)
576 EN 131-2:2010+A1:2012        Ladders - Part 2: Requirements, testing, marking                NC   26   88 MECMA
577 EN 1267:2012          Industrial valves - Test of flow resistance using water as NC   21   89 MECMA
                          test fluid
578 EN 12266-1:2012       Industrial valves - Testing of metallic valves - Part 1:   NC   13   89 MECMA
                          Pressure tests, test procedures and acceptance criteria -
                          Mandatory requirements
579 EN 12266-2:2012       Industrial valves - Testing of metallic valves - Part 2:   NC   11   89 MECMA
                          Tests, test procedures and acceptance criteria -
                          Supplementary requirements
580 EN ISO 2419:2012      Leather - Physical and mechanical tests - Sample           NC   4 102 MECMA
                          preparation and conditioning (ISO 2419:2012)
581 EN ISO 3376:2011      Leather - Physical and mechanical tests - Determination    NC   7 102 MECMA
                          of tensile strength and percentage extension (ISO
                          3376:2011)
582 EN ISO 3377-1:2011    Leather - Physical and mechanical tests - Determination NC      5 102 MECMA
                          of tear load - Part 1: Single edge tear (ISO 3377-1:2011)

583 EN ISO 5402-1:2011    Leather - Determination of flex resistance - Part 1:       NC   7 102 MECMA
                          Flexometer method (ISO 5402-1:2011)
584 EN ISO 5403-1:2011    Leather - Determination of water resistance of flexible    NC   9 102 MECMA
                          leather - Part 1: Repeated linear compression
                          (penetrometer) (ISO 5403-1:2011)
585 EN ISO 5403-2:2011    Leather - Determination of water resistance of flexible NC      8 102 MECMA
                          leather - Part 2: Repeated angular compression (Maeser)
                          (ISO 5403-2:2011)
586 EN ISO 5404:2011      Leather - Physical test methods - Determination of water NC     8 102 MECMA
                          resistance of heavy leathers (ISO 5404:2011)

587 EN ISO 14087:2011     Leather - Physical and mechanical tests - Determination    NC   6 102 MECMA
                          of bending force (ISO 14087:2011)
588 EN ISO 14088:2012     Leather - Chemical tests - Quantitative analysis of        NC   10 102 MECMA
                          tanning agents by filter method (ISO 14088:2012)
589 EN 14906:2012         Leather - Leather for automotive - Test methods and        NC   6 102 MECMA
                          testing parameters
590 EN 16055:2012         Leather - Raw bovine hides and skins - Description,        NC   8 102 MECMA
                          presentation and preservation
591 EN ISO 17071:2011     Leather - Physical and mechanical tests - Determination    NC   14 102 MECMA
                          of fogging characteristics (ISO 17071:2006)

592 EN ISO 17074:2011     Leather - Physical and mechanical tests - Determination    NC   5 102 MECMA
                          of resistance to horizontal spread of flame (ISO
                          17074:2006)
593 EN ISO 17076-1:2012   Leather - Determination of abrasion resistance - Part 1:   NC   6 102 MECMA
                          Taber method (ISO 17076-1:2012)
594 EN ISO 17186:2011     Leather - Physical and mechanical tests - Determination    NC   9 102 MECMA
                          of surface coating thickness (ISO 17186:2011)

595 EN ISO 17230:2011     Leather - Physical and mechanical tests - Determination    NC   5 102 MECMA
                          of water penetration pressure (ISO 17230:2006)

596 EN ISO 17231:2011     Leather - Physical and mechanical tests - Determination NC      6 102 MECMA
                          of water repellency of garment leather (ISO 17231:2006)

597 EN ISO 17235:2011     Leather - Physical and mechanical tests - Determination    NC   5 102 MECMA
                          of softness (ISO 17235:2011)
598 EN ISO 26082-1:2012   Leather - Physical and mechanical test methods for the     NC   9 102 MECMA
                          determination of soiling - Part 1: Rubbing (Martindale)
                          method (ISO 26082-1:2012)
599 EN ISO 26082-2:2012   Leather - Physical and mechanical test methods for the     NC   10 102 MECMA
                          determination of soiling - Part 2: Tumbling method (ISO
                          26082-2:2012)
600 EN ISO 105-B10:2011          Textiles - Tests for colour fastness - Part B10: Artificial NC     18 103 MECMA
                                 weathering - Exposure to filtered xenon-arc radiation (ISO
                                 105-B10:2011)
601 EN ISO 1140:2012             Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes NC        6 103 MECMA
                                 (ISO 1140:2012)
602 EN ISO 1141:2012             Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes  NC       6 103 MECMA
                                 (ISO 1141:2012)
603 EN ISO 3175-3:2003/AC:2012   Textiles - Professional care, drycleaning and wetcleaning ER       1 103 MECMA
                                 of fabrics and garments - Part 3: Procedure for testing
                                 performance when cleaning and finishing using
                                 hydrocarbon solvents - Technical Corrigendum 1 (ISO
                                 3175-3:2003/Cor 1:2009)


604 EN ISO 3175-4:2003/AC:2012   Textiles - Professional care, drycleaning and wetcleaning ER       1 103 MECMA
                                 of fabrics and garments - Part 4: Procedure for testing
                                 performance when cleaning and finishing using simulated
                                 wetcleaning - Technical Corrigendum 1 (ISO 3175-
                                 4:2003/Cor 1:2009)


605 EN ISO 3758:2012             Textiles - Care labelling code using symbols (ISO             NC   17 103 MECMA
                                 3758:2012)
606 EN ISO 6330:2012             Textiles - Domestic washing and drying procedures for         NC   22 103 MECMA
                                 textile testing (ISO 6330:2012)
607 EN ISO 9092:2011             Textiles - Nonwovens - Definition (ISO 9092:2011)             NC    2 103 MECMA
608 EN 14362-1:2012              Textiles - Methods for determination of certain aromatic      NC   22 103 MECMA
                                 amines derived from azo colorants - Part 1: Detection of
                                 the use of certain azo colorants accessible with and
                                 without extracting the fibres
609 EN 14362-3:2012              Textiles - Methods for determination of certain aromatic      NC   13 103 MECMA
                                 amines derived from azo colorants - Part 3: Detection of
                                 the use of certain azo colorants, which may release 4-
                                 aminoazobenzene
610 EN 15618:2009+A1:2012        Rubber- or plastic-coated fabrics - Upholstery fabrics -      NC   6 103 MECMA
                                 Classification and methods of test
611 EN ISO 30023:2012            Textiles - Qualification symbols for labelling workwear to    NC   9 103 MECMA
                                 be industrially laundered (ISO 30023:2010)

612 EN 15924:2011                Fertilizers - Determination of the fineness of grinding of    NC   4 105 MECMA
                                 soft natural phosphates
613 EN 15925:2011                Fertilizers - Extraction of total sulfur present in various   NC   4 105 MECMA
                                 forms
614 EN 15926:2011                Fertilizers - Extraction of water soluble sulfur where the    NC   3 105 MECMA
                                 sulfur is in various forms
615 EN 15956:2011                Fertilizers - Extraction of phosphorus soluble in mineral     NC   3 105 MECMA
                                 acids
616 EN 15957:2011                Fertilizers - Extraction of phosphorus which is soluble in    NC   4 105 MECMA
                                 neutral ammonium citrate
617 EN 15958:2011                Fertilizers - Extraction of water soluble phosphorus          NC   3 105 MECMA
618 EN 15959:2011                Fertilizers - Determination of extracted phosphorus           NC   8 105 MECMA
619 EN 15960:2011                Fertilizers - Extraction of total calcium, total magnesium,   NC   3 105 MECMA
                                 total sodium and total sulfur in the forms of sulfates

620 EN 15961:2011                Fertilizers - Extraction of water-soluble calcium,            NC   3 105 MECMA
                                 magnesium, sodium and sulfur in the form of sulfates

621 EN 16032:2011                Fertilizers - Extraction and determination of elemental    NC      4 105 MECMA
                                 sulfur
622 EN 16075:2011                Fertilizers - Determination of N-(2-nitrophenyl)phosphoric NC      6 105 MECMA
                                 triamide (2-NPT) in urea and fertilizers containing urea -
                                 Method using high-performance liquid chromatography
                                 (HPLC)
623 EN 16109:2011                Fertilizers - Determination of complexed micro-nutrient     NC    13 105 MECMA
                                 ions in fertilizers - Identification of lignosulfonates

624 EN ISO 179-2:1999/A1:2012    Plastics - Determination of Charpy impact properties -      NC    4 108 MECMA
                                 Part 2: Instrumented impact test - Amendment 1:
                                 Precision data (ISO 179-2:1997/Amd 1:2011)
625 EN ISO 1043-1:2011           Plastics - Symbols and abbreviated terms - Part 1: Basic NC       13 108 MECMA
                                 polymers and their special characteristics (ISO 1043-
                                 1:2011)
626 EN ISO 1043-2:2011           Plastics - Symbols and abbreviated terms - Part 2: Fillers NC     4 108 MECMA
                                 and reinforcing materials (ISO 1043-2:2011)
627 EN ISO 1133-1:2011           Plastics - Determination of the melt mass-flow rate (MFR) NC      31 108 MECMA
                                 and melt volume-flow rate (MVR) of thermoplastics - Part
                                 1: Standard method (ISO 1133-1:2011)

628 EN ISO 1133-2:2011           Plastics - Determination of the melt mass-flow rate (MFR) NC      20 108 MECMA
                                 and melt volume-flow rate (MVR) of thermoplastics - Part
                                 2: Method for materials sensitive to time-temperature
                                 history and/or moisture (ISO 1133-2:2011)

629 EN ISO 1622-1:2012           Plastics - Polystyrene (PS) moulding and extrusion          NC    6 108 MECMA
                                 materials - Part 1: Designation system and basis for
                                 specifications (ISO 1622-1:2012)
630 EN ISO 1628-1:2009/A1:2012   Plastics - Determination of the viscosity of polymers in    NC    3 108 MECMA
                                 dilute solution using capillary viscometers - Part 1:
                                 General principles - Amendment 1 (ISO 1628-
                                 1:2009/Amd 1:2012)
631 EN ISO 3673-2:2012           Plastics - Epoxy resins - Part 2: Preparation of test    NC       8 108 MECMA
                                 specimens and determination of properties of crosslinked
                                 epoxy resins (ISO 3673-2:2012)
632 EN ISO 7214:2012             Cellular plastics - Polyethylene - Methods of test (ISO   NC      11 108 MECMA
                                 7214:2012)
633 EN ISO 11833-1:2012          Plastics - Unplasticized poly(vinyl chloride) sheets -    NC      11 108 MECMA
                                 Types, dimensions and characteristics - Part 1: Sheets of
                                 thickness not less than 1 mm (ISO 11833-1:2012)

634 EN 12201-4:2012              Plastics piping systems for water supply, and for           NC    16 108 MECMA
                                 drainage and sewerage under pressure - Polyethylene
                                 (PE) - Part 4: Valves
635 EN 14758-1:2012              Plastics piping systems for non-pressure underground        NC    21 108 MECMA
                                 drainage and sewerage - Polypropylene with mineral
                                 modifiers (PP-MD) - Part 1: Specifications for pipes,
                                 fittings and the system
636 EN ISO 22007-1:2012          Plastics - Determination of thermal conductivity and         NC   19 108 MECMA
                                 thermal diffusivity - Part 1: General principles (ISO 22007-
                                 1:2009)
637 EN ISO 22007-2:2012          Plastics - Determination of thermal conductivity and        NC    20 108 MECMA
                                 thermal diffusivity - Part 2: Transient plane heat source
                                 (hot disc) method (ISO 22007-2:2008)
638 EN ISO 22007-3:2012          Plastics - Determination of thermal conductivity and        NC    13 108 MECMA
                                 thermal diffusivity - Part 3: Temperature wave analysis
                                 method (ISO 22007-3:2008)
639 EN ISO 22007-4:2012          Plastics - Determination of thermal conductivity and        NC    15 108 MECMA
                                 thermal diffusivity - Part 4: Laser flash method (ISO
                                 22007-4:2008)
640 EN ISO 25762:2012            Plastics - Guidance on the assessment of the fire           NC    31 108 MECMA
                                 characteristics and fire performance of fibre-reinforced
                                 polymer composites (ISO 25762:2009)
641 EN ISO 772:2011              Hydrometry - Vocabulary and symbols (ISO 772:2011)          NC    78 109 MECMA

642 EN 12405-2:2012              Gas meters - Conversion devices - Part 2: Energy            NC    59 109 MECMA
                                 conversion
643 EN 152:2011                Wood preservatives - Determination of the protective           NC   32 118 MECMA
                               effectiveness of a preservative treatment against blue
                               stain in wood in service - Laboratory method

644 EN 747-1:2012              Furniture - Bunk beds and high beds - Part 1: Safety,          NC    7 118 MECMA
                               strength and durability requirements
645 EN 747-2:2012              Furniture - Bunk beds and high beds - Part 2: Test             NC    9 118 MECMA
                               methods
646 EN 1728:2012               Furniture - Seating - Test methods for the determination       NC   29 118 MECMA
                               of strength and durability
647 EN 1729-2:2012             Furniture - Chairs and tables for educational institutions -   NC   10 118 MECMA
                               Part 2: Safety requirements and test methods

648 EN 13629:2012              Wood flooring - Solid individual and pre-assembled             NC   15 118 MECMA
                               hardwood boards
649 EN 13759:2012              Furniture - Operating mechanisms for seating and sofa-         NC    5 118 MECMA
                               beds - Test methods
650 EN 14272:2011              Plywood - Calculation method for some mechanical               NC   25 118 MECMA
                               properties
651 EN 15186:2012              Furniture - Assessment of the surface resistance to            NC   11 118 MECMA
                               scratching
652 EN 15939:2011              Hardware for furniture - Strength and loading capacity of      NC   10 118 MECMA
                               wall attachment devices
653 EN 16014:2011              Hardware for furniture - Strength and durability of locking    NC   10 118 MECMA
                               mechanisms
654 EN 16122:2012              Domestic and non-domestic storage furniture - Test             NC   23 118 MECMA
                               methods for the determination of strength, durability and
                               stability
655 EN 14175-7:2012            Fume cupboards - Part 7: Fume cupboards for high heat NC            11 119 MECMA
                               and acidic load
656 EN 71-8:2011               Safety of toys - Part 8: Activity toys for domestic use NC          43 125 MECMA

657 EN 1888:2012               Child care articles - Wheeled child conveyances - Safety       NC   51 125 MECMA
                               requirements and test methods
658 EN 1930:2011               Child use and care articles - Safety barriers - Safety         NC   21 125 MECMA
                               requirements and test methods
659 EN 61812-1:2011            Time relays for industrial and residential use -- Part 1:      NC   43 128 MECMA
                               Requirements and tests
660 EN 60974-13:2011           Arc welding equipment -- Part 13: Welding clamp                NC     9 129 MECMA
661 EN 60730-1:2011            Automatic electrical controls for household and similar        NC   274 130 MECMA
                               use -- Part 1: General requirements
662 EN 60061-1:1993/A47:2012   Lamp caps and holders together with gauges for the             NC    9 131 MECMA
                               control of interchangeability and safety -- Part 1: Lamp
                               caps
663 EN 60061-2:1993/A44:2012   Lamp caps and holders together with gauges for the             NC    8 131 MECMA
                               control of interchangeability and safety -- Part 2:
                               Lampholders
664 EN 60061-3:1993/A45:2012   Lamp caps and holders together with gauges for the         NC       31 131 MECMA
                               control of interchangeability and safety -- Part 3: Gauges

665 EN 60061-4:1992/A13:2011   Lamp caps and holders together with gauges for the             NC   15 131 MECMA
                               control of interchangeability and safety -- Part 4:
                               Guidelines and general information
666 EN 60400:2008/A1:2011      Lampholders for tubular fluorescent lamps and            NC         12 131 MECMA
                               starterholders
667 EN 60432-1:2000/A2:2012    Incandescent lamps - Safety specifications -- Part 1:    NC          3 131 MECMA
                               Tungsten filament lamps for domestic and similar general
                               lighting purposes
668 EN 60432-2:2000/A2:2012    Incandescent lamps - Safety specifications -- Part 2:   NC           3 131 MECMA
                               Tungsten halogen lamps for domestic and similar general
                               lighting purposes
669 EN 60598-2-13:2006/A1:2012   Luminaires -- Part 2-13: Particular requirements - Ground    NC    2 131 MECMA
                                 recessed luminaires
670 EN 60598-2-2:2012            Luminaires -- Part 2-2: Particular requirements -            NC    8 131 MECMA
                                 Recessed luminaires
671 EN 60598-2-3:2003/A1:2011    Luminaires -- Part 2-3: Particular requirements -            NC    5 131 MECMA
                                 Luminaires for road and street lighting
672 EN 60598-2-18:1994/A1:2012   Luminaires -- Part 2: Particular requirements -- Section     NC    2 131 MECMA
                                 18: Luminaires for swimming pools and similar
                                 applications
673 EN 60662:2012                High-pressure sodium vapour lamps - Performance              NC   35 131 MECMA
                                 specifications
674 EN 60838-2-2:2006/A1:2012    Miscellaneous lampholders -- Part 2-2: Particular            NC    3 131 MECMA
                                 requirements - Connectors for LED-modules
675 EN 60901:1996/A5:2012        Single-capped fluorescent lamps - Performance                NC   21 131 MECMA
                                 specifications
676 EN 60929:2011                AC and/or DC-supplied electronic control gear for tubular    NC   33 131 MECMA
                                 fluorescent lamps - Performance requirements

677 EN 60929:2011/AC:2011        AC and/or DC-supplied electronic control gear for tubular ER       1 131 MECMA
                                 fluorescent lamps - Performance requirements

678 EN 61184:2008/A1:2011        Bayonet lampholders                                          NC    5 131 MECMA
679 EN 61341:2011                Method of measurement of centre beam intensity and           NC    9 131 MECMA
                                 beam angle(s) of reflector lamps
680 EN 61347-2-2:2012            Lamp controlgear -- Part 2-2: Particular requirements for    NC   12 131 MECMA
                                 d.c. or a.c. supplied electronic step-down convertors for
                                 filament lamps
681 EN 61347-2-3:2011            Lamp control gear -- Part 2-3: Particular requirements for NC     25 131 MECMA
                                 a.c. and/or d.c. supplied electronic control gear for
                                 fluorescent lamps
682 EN 61347-2-7:2012            Lamp controlgear -- Part 2-7: Particular requirements for    NC   34 131 MECMA
                                 battery supplied electronic controlgear for emergency
                                 lighting (self-contained)
683 EN 62034:2012                Automatic test systems for battery powered emergency         NC   24 131 MECMA
                                 escape lighting
684 EN 62386-209:2011            Digital addressable lighting interface -- Part 209:          NC   155 131 MECMA
                                 Particular requirements for control gear - Colour control
                                 (device type 8)
685 EN 62386-210:2011            Digital addressable lighting interface -- Part 210:          NC   33 131 MECMA
                                 Particular requirements for control gear - Sequencer
                                 (device type 9)
686 EN 62442-1:2011              Energy performance of lamp controlgear -- Part 1:            NC   16 131 MECMA
                                 Controlgear for fluorescent lamps - Method of
                                 measurement to determine the total input power of
                                 controlgear circuits and the efficiency of the controlgear

687 EN 62442-1:2011/AC:2012      Energy performance of lamp controlgear -- Part 1:            ER    1 131 MECMA
                                 Controlgear for fluorescent lamps - Method of
                                 measurement to determine the total input power of
                                 controlgear circuits and the efficiency of the controlgear

688 EN 62554:2011                Sample preparation for measurement of mercury level in NC         21 131 MECMA
                                 fluorescent lamps
689 EN 62639:2012                Fluorescent induction lamps - Performance specification NC        31 131 MECMA

690 EN 61362:2012                Guide to specification of hydraulic turbine governing        NC   53 133 MECMA
                                 systems
691 EN 60115-1:2011              Fixed resistors for use in electronic equipment -- Part 1:   NC   80 135 MECMA
                                 Generic specification
692 EN 60384-13:2012             Fixed capacitors for use in electronic equipment -- Part    NC   23 135 MECMA
                                 13: Sectional specification - Fixed polypropylene film
                                 dielectric metal foil d.c. capacitors

693 EN 60384-2:2012              Fixed capacitors for use in electronic equipment -- Part 2: NC   23 135 MECMA
                                 Sectional specification - Fixed metallized polyethylene
                                 terephthalate film dielectric d.c. capacitors

694 EN 60384-21:2012             Fixed capacitors for use in electronic equipment -- Part    NC   33 135 MECMA
                                 21: Sectional specification - Fixed surface mount
                                 multilayer capacitors of ceramic dielectric, Class 1

695 EN 60384-22:2012             Fixed capacitors for use in electronic equipment -- Part    NC   36 135 MECMA
                                 22: Sectional specification - Fixed surface mount
                                 multilayer capacitors of ceramic dielectric, Class 2

696 EN 140401-804:2011           Detail Specification: Fixed low power film high stability   NC   25 135 MECMA
                                 SMD resistors - Rectangular - Stability classes 0,1; 0,25

697 EN 140401-804:2011/AC:2012   Detail Specification: Fixed low power film high stability   ER    1 135 MECMA
                                 SMD resistors - Rectangular - Stability classes 0,1; 0,25

698 EN 61850-4:2011              Communication networks and systems for power utility        NC   36 140 MECMA
                                 automation -- Part 4: System and project management

699 EN 61850-7-1:2011            Communication networks and systems for power utility        NC   107 140 MECMA
                                 automation -- Part 7-1: Basic communication structure -
                                 Principles and models
700 EN 61850-8-1:2011            Communication networks and systems for power utility        NC   163 140 MECMA
                                 automation -- Part 8-1: Specific communication service
                                 mapping (SCSM) - Mappings to MMS (ISO 9506-1 and
                                 ISO 9506-2) and to ISO/IEC 8802-3
701 EN 61850-9-2:2011            Communication networks and systems for power utility   NC        29 140 MECMA
                                 automation -- Part 9-2: Specific communication service
                                 mapping (SCSM) - Sampled values over ISO/IEC 8802-3

702 EN 61970-301:2011            Energy management system application program                NC   209 140 MECMA
                                 interface (EMS-API) -- Part 301: Common information
                                 model (CIM) base
703 EN 15331:2011                Criteria for design, management and control of              NC   21 144 MECMA
                                 maintenance services for buildings
704 EN 61709:2011                Electric components - Reliability - Reference conditions    NC   76 144 MECMA
                                 for failure rates and stress models for conversion

705 EN 60297-3-107:2012          Mechanical structures for electronic equipment -            NC   12 145 MECMA
                                 Dimensions of mechanical structures of the 482,6 mm
                                 (19 in) series -- Part 3-107: Dimensions of subracks and
                                 plug-in units, small form factor
706 EN 60352-5:2012              Solderless connections -- Part 5: Press-in connections -    NC   28 145 MECMA
                                 General requirements, test methods and practical
                                 guidance
707 EN 60512-1-100:2012          Connectors for electronic equipment - Tests and             NC    8 145 MECMA
                                 measurements -- Part 1-100: General - Applicable
                                 publications
708 EN 60512-17-2:2011           Connectors for electronic equipment - Tests and             NC    6 145 MECMA
                                 measurements -- Part 17-2: Cable clamping tests - Test
                                 17b: Cable clamp resistance to cable rotation
709 EN 60512-27-100:2012         Connectors for electronic equipment - Tests and           NC     45 145 MECMA
                                 measurements -- Part 27-100: Signal integrity tests up to
                                 500 MHz on IEC 60603-7 series connectors - Tests 27a
                                 to 27g
710 EN 60512-7-2:2012         Connectors for electronic equipment - Tests and          NC       8 145 MECMA
                              measurements -- Part 7-2: Impact tests (free connectors)
                              - Test 7b: Mechanical strength impact
711 EN 60512-8-2:2011         Connectors for electronic equipment - Tests and            NC     6 145 MECMA
                              measurements -- Part 8-2: Static load tests (fixed
                              connectors) - Test 8b: Static load, axial
712 EN 60512-8-3:2011         Connectors for electronic equipment - Tests and            NC     7 145 MECMA
                              measurements -- Part 8-3: Static load tests (fixed
                              connectors) - Test 8c: Robustness of actuating lever

713 EN 60512-9-2:2012         Connectors for electronic equipment - Tests and            NC     7 145 MECMA
                              measurements -- Part 9-2: Endurance tests - Test 9b:
                              Electrical load and temperature
714 EN 60512-9-3:2011         Connectors for electronic equipment - Tests and            NC     10 145 MECMA
                              measurements -- Part 9-3: Endurance tests - Test 9c:
                              Mechanical operation (engaging/separating) with
                              electrical load
715 EN 60512-9-4:2011         Connectors for electronic equipment - Tests and            NC     6 145 MECMA
                              measurements -- Part 9-4: Endurance tests - Test 9d:
                              Durability of contact retention system and seals
                              (maintenance, ageing)
716 EN 60603-7:2009/A1:2011   Connectors for electronic equipment -- Part 7: Detail      NC     4 145 MECMA
                              specification for 8-way, unshielded, free and fixed
                              connectors
717 EN 60603-7-1:2011         Connectors for electronic equipment -- Part 7-1: Detail    NC     22 145 MECMA
                              specification for 8-way, shielded, free and fixed
                              connectors
718 EN 61076-2:2011           Connectors for electronic equipment - Product                NC   16 145 MECMA
                              requirements -- Part 2: Sectional specification for circular
                              connectors
719 EN 61076-2-001:2011       Connectors for electronic equipment - Product              NC     36 145 MECMA
                              requirements -- Part 2-001: Circular connectors - Blank
                              detail specification
720 EN 61076-2-101:2012       Connectors for electronic equipment - Product              NC     28 145 MECMA
                              requirements -- Part 2-101: Circular connectors - Detail
                              specification for M12 connectors with screw-locking

721 EN 61076-2-106:2011       Connectors for electronic equipment - Product              NC     22 145 MECMA
                              requirements -- Part 2-106: Circular connectors - Detail
                              specification for connectors M 16 x 0,75 with screw-
                              locking and degree of protection IP40 or IP65/67

722 EN 61169-35:2011          Radio-frequency connectors -- Part 35: Sectional         NC       20 145 MECMA
                              specification for 2,92 series RF connectors
723 EN 61969-1:2012           Mechanical structures for electronic equipment - Outdoor NC       13 145 MECMA
                              enclosures -- Part 1: Design guidelines
724 EN 61969-2:2012           Mechanical structures for electronic equipment - Outdoor NC       7 145 MECMA
                              enclosures -- Part 2: Coordination dimensions

725 EN 61969-3:2012           Mechanical structures for electronic equipment - Outdoor NC       13 145 MECMA
                              enclosures -- Part 3: Environmental requirements, tests
                              and safety aspects
726 EN 378-2:2008+A2:2012     Refrigerating systems and heat pumps - Safety and          NC     59 147 MECMA
                              environmental requirements - Part 2: Design,
                              construction, testing, marking and documentation
727 EN 378-1:2008+A2:2012     Refrigerating systems and heat pumps - Safety and        NC       55 147 MECMA
                              environmental requirements - Part 1: Basic requirements,
                              definitions, classification and selection criteria

728 EN 378-3:2008+A1:2012     Refrigerating systems and heat pumps - Safety and          NC     19 147 MECMA
                              environmental requirements - Part 3: Installation site and
                              personal protection
729 EN 378-4:2008+A1:2012         Refrigerating systems and heat pumps - Safety and         NC     23 147 MECMA
                                  environmental requirements - Part 4: Operation,
                                  maintenance, repair and recovery
730 EN 14511-1:2011               Air conditioners, liquid chilling packages and heat pumps NC     9 147 MECMA
                                  with electrically driven compressors for space heating
                                  and cooling - Part 1: Terms and definitions

731 EN 14511-2:2011               Air conditioners, liquid chilling packages and heat pumps NC     13 147 MECMA
                                  with electrically driven compressors for space heating
                                  and cooling - Part 2: Test conditions
732 EN 14511-3:2011               Air conditioners, liquid chilling packages and heat pumps NC     36 147 MECMA
                                  with electrically driven compressors for space heating
                                  and cooling - Part 3: Test methods
733 EN 14511-4:2011               Air conditioners, liquid chilling packages and heat pumps NC     10 147 MECMA
                                  with electrically driven compressors for space heating
                                  and cooling - Part 4: Requirements
734 EN 14624:2012                 Performance of portable leak detectors and of room         NC    17 147 MECMA
                                  monitors for halogenated refrigerants
735 EN 14825:2012                 Air conditioners, liquid chilling packages and heat pumps, NC    55 147 MECMA
                                  with electrically driven compressors, for space heating
                                  and cooling - Testing and rating at part load conditions
                                  and calculation of seasonal performance

736 EN ISO 23953-1:2005/A1:2012   Refrigerated display cabinets - Part 1: Vocabulary -      NC     3 147 MECMA
                                  Amendment 1 (ISO 23953-1:2005/Amd 1:2012)
737 EN ISO 23953-2:2005/A1:2012   Refrigerated display cabinets - Part 2: Classification,   NC     22 147 MECMA
                                  requirements and test conditions - Amendment 1 (ISO
                                  23953-2:2005/Amd 1:2012)
738 EN 764-2:2012                 Pressure equipment - Part 2: Quantities, symbols and      NC     4 152 MECMA
                                  units
739   EN 13445-2:2009/A1:2012     Unfired pressure vessels - Part 2: Materials              NC      5   152   MECMA
740   EN 13445-2:2009/A2:2012     Unfired pressure vessels - Part 2: Materials              NC      2   152   MECMA
741   EN 13445-3:2009/A1:2012     Unfired pressure vessels - Part 3: Design                 NC      4   152   MECMA
742   EN 16081:2011               Hyperbaric chambers - Specific requirements for fire      NC     13   152   MECMA
                                  extinguishing systems - Performance, installation and
                                  testing
743 EN 1458-1:2011                Domestic direct gas-fired tumble dryers of types B22D     NC     87 154 MECMA
                                  and B23D, of nominal heat input not exceeding 6 kW -
                                  Part 1: Safety
744 EN 1458-2:2011                Domestic direct gas-fired tumble dryers of types B22D     NC     4 154 MECMA
                                  and B23D, of nominal heat input not exceeding 6 kW -
                                  Part 2: Rational use of energy
745 EN ISO 7539-6:2011            Corrosion of metals and alloys - Stress corrosion testing - NC   30 157 MECMA
                                  Part 6: Preparation and use of precracked specimens for
                                  tests under constant load or constant displacement (ISO
                                  7539-6:2011)
746 EN ISO 9223:2012              Corrosion of metals and alloys - Corrosivity of           NC     18 157 MECMA
                                  atmospheres - Classification, determination and
                                  estimation (ISO 9223:2012)
747 EN ISO 9224:2012              Corrosion of metals and alloys - Corrosivity of           NC     15 157 MECMA
                                  atmospheres - Guiding values for the corrosivity
                                  categories (ISO 9224:2012)
748 EN ISO 9225:2012              Corrosion of metals and alloys - Corrosivity of           NC     19 157 MECMA
                                  atmospheres - Measurement of environmental
                                  parameters affecting corrosivity of atmospheres (ISO
                                  9225:2012)
749 EN ISO 9226:2012              Corrosion of metals and alloys - Corrosivity of           NC     6 157 MECMA
                                  atmospheres - Determination of corrosion rate of
                                  standard specimens for the evaluation of corrosivity (ISO
                                  9226:2012)
750 EN ISO 12696:2012             Cathodic protection of steel in concrete (ISO             NC     71 157 MECMA
                                  12696:2012)
751 EN 60865-1:2012     Short-circuit currents - Calculation of effects -- Part 1:   NC   33 158 MECMA
                        Definitions and calculation methods
752 EN 50399:2011       Common test methods for cables under fire conditions -       NC   41 159 MECMA
                        Heat release and smoke production measurement on
                        cables during flame spread test - Test apparatus,
                        procedures, results
753 EN 60811-100:2012   Electric and optical fibre cables - Test methods for non-    NC   10 159 MECMA
                        metallic materials -- Part 100: General
754 EN 60811-201:2012   Electric and optical fibre cables - Test methods for non-    NC   8 159 MECMA
                        metallic materials -- Part 201: General tests -
                        Measurement of insulation thickness
755 EN 60811-202:2012   Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                        metallic materials -- Part 202: General tests -
                        Measurement of thickness of non-metallic sheath
756 EN 60811-203:2012   Electric and optical fibre cables - Test methods for non-    NC   6 159 MECMA
                        metallic materials -- Part 203: General tests -
                        Measurement of overall dimensions
757 EN 60811-301:2012   Electric and optical fibre cables - Test methods for non-    NC   6 159 MECMA
                        metallic materials -- Part 301: Electrical tests -
                        Measurement of the permittivity at 23 °C of filling
                        compounds
758 EN 60811-302:2012   Electric and optical fibre cables - Test methods for non-    NC   6 159 MECMA
                        metallic materials -- Part 302: Electrical tests -
                        Measurement of the d.c. resistivity at 23 °C and 100 °C
                        of filling compounds
759 EN 60811-401:2012   Electric and optical fibre cables - Test methods for non-    NC   16 159 MECMA
                        metallic materials -- Part 401: Miscellaneous tests -
                        Thermal ageing methods - Ageing in an air oven

760 EN 60811-402:2012   Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                        metallic materials -- Part 402: Miscellaneous tests -
                        Water absorption tests
761 EN 60811-403:2012   Electric and optical fibre cables - Test methods for non-    NC   11 159 MECMA
                        metallic materials -- Part 403: Miscellaneous tests -
                        Ozone resistance test on cross-linked compounds

762 EN 60811-404:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 404: Miscellaneous tests -
                        Mineral oil immersion tests for sheaths
763 EN 60811-405:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 405: Miscellaneous tests -
                        Thermal stability test for PVC insulations and PVC
                        sheaths
764 EN 60811-406:2012   Electric and optical fibre cables - Test methods for non-    NC   12 159 MECMA
                        metallic materials -- Part 406: Miscellaneous tests -
                        Resistance to stress cracking of polyethylene and
                        polypropylene compounds
765 EN 60811-407:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 407: Miscellaneous tests -
                        Measurement of mass increase of polyethylene and
                        polypropylene compounds
766 EN 60811-408:2012   Electric and optical fibre cables - Test methods for non- NC      10 159 MECMA
                        metallic materials -- Part 408: Miscellaneous tests - Long-
                        term stability test of polyethylene and polypropylene
                        compounds
767 EN 60811-409:2012   Electric and optical fibre cables - Test methods for non- NC      10 159 MECMA
                        metallic materials -- Part 409: Miscellaneous tests - Loss
                        of mass test for thermoplastic insulations and sheaths
768 EN 60811-410:2012   Electric and optical fibre cables - Test methods for non- NC      9 159 MECMA
                        metallic materials -- Part 410: Miscellaneous tests - Test
                        method for copper-catalyzed oxidative degradation of
                        polyolefin insulated conductors
769 EN 60811-411:2012   Electric and optical fibre cables - Test methods for non- NC      7 159 MECMA
                        metallic materials -- Part 411: Miscellaneous tests - Low-
                        temperature brittleness of filling compounds

770 EN 60811-412:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 412: Miscellaneous tests -
                        Thermal ageing methods - Ageing in an air bomb

771 EN 60811-501:2012   Electric and optical fibre cables - Test methods for non-    NC   16 159 MECMA
                        metallic materials -- Part 501: Mechanical tests - Tests
                        for determining the mechanical properties of insulating
                        and sheathing compounds
772 EN 60811-502:2012   Electric and optical fibre cables - Test methods for non-    NC   6 159 MECMA
                        metallic materials -- Part 502: Mechanical tests -
                        Shrinkage test for insulations
773 EN 60811-503:2012   Electric and optical fibre cables - Test methods for non-    NC   6 159 MECMA
                        metallic materials -- Part 503: Mechanical tests -
                        Shrinkage test for sheaths
774 EN 60811-504:2012   Electric and optical fibre cables - Test methods for non- NC      9 159 MECMA
                        metallic materials -- Part 504: Mechanical tests - Bending
                        tests at low temperature for insulation and sheaths

775 EN 60811-505:2012   Electric and optical fibre cables - Test methods for non- NC      10 159 MECMA
                        metallic materials -- Part 505: Mechanical tests -
                        Elongation at low temperature for insulations and sheaths

776 EN 60811-506:2012   Electric and optical fibre cables - Test methods for non-    NC   8 159 MECMA
                        metallic materials -- Part 506: Mechanical tests - Impact
                        test at low temperature for insulations and sheaths

777 EN 60811-507:2012   Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                        metallic materials -- Part 507: Mechanical tests - Hot set
                        test for cross-linked materials
778 EN 60811-508:2012   Electric and optical fibre cables - Test methods for non-    NC   15 159 MECMA
                        metallic materials -- Part 508: Mechanical tests -
                        Pressure test at high temperature for insulation and
                        sheaths
779 EN 60811-509:2012   Electric and optical fibre cables - Test methods for non- NC      9 159 MECMA
                        metallic materials -- Part 509: Mechanical tests - Test for
                        resistance of insulations and sheaths to cracking (heat
                        shock test)
780 EN 60811-510:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 510: Mechanical tests -
                        Methods specific to polyethylene and polypropylene
                        compounds - Wrapping test after thermal ageing in air

781 EN 60811-511:2012   Electric and optical fibre cables - Test methods for non-    NC   11 159 MECMA
                        metallic materials -- Part 511: Mechanical tests -
                        Measurement of the melt flow index of polyethylene
                        compounds
782 EN 60811-512:2012   Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                        metallic materials -- Part 512: Mechanical tests -
                        Methods specific to polyethylene and polypropylene
                        compounds - Tensile strength and elongation at break
                        after conditioning at elevated temperature
783 EN 60811-513:2012           Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                                metallic materials -- Part 513: Mechanical tests -
                                Methods specific to polyethylene and polypropylene
                                compounds - Wrapping test after conditioning
784 EN 60811-601:2012           Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                                metallic materials -- Part 601: Physical tests -
                                Measurement of the drop point of filling compounds
785 EN 60811-602:2012           Electric and optical fibre cables - Test methods for non- NC      6 159 MECMA
                                metallic materials -- Part 602: Physical tests - Separation
                                of oil in filling compounds
786 EN 60811-603:2012           Electric and optical fibre cables - Test methods for non-    NC   8 159 MECMA
                                metallic materials -- Part 603: Physical tests -
                                Measurement of total acid number of filling compounds

787 EN 60811-604:2012           Electric and optical fibre cables - Test methods for non-    NC   7 159 MECMA
                                metallic materials -- Part 604: Physical tests -
                                Measurement of absence of corrosive components in
                                filling compounds
788 EN 60811-605:2012           Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                                metallic materials -- Part 605: Physical tests -
                                Measurement of carbon black and/or mineral filler in
                                polyethylene compounds
789 EN 60811-606:2012           Electric and optical fibre cables - Test methods for non-    NC   9 159 MECMA
                                metallic materials -- Part 606: Physical tests - Methods
                                for determining the density
790 EN 60811-607:2012           Electric and optical fibre cables - Test methods for non- NC      7 159 MECMA
                                metallic materials -- Part 607: Physical tests - Test for the
                                assessment of carbon black dispersion in polyethylene
                                and polypropylene
791 EN 50117-2-5:2004/AC:2012                                                              NC     1 160 MECMA
792 EN 50288-8:2012             Multi-element metallic cables used in analogue and         NC     7 160 MECMA
                                digital communication and control -- Part 8: Specification
                                for type 1 cables characterised up to 2 MHz

793 EN 50441-1:2012             Cables for indoor residential telecommunication              NC   11 160 MECMA
                                installations -- Part 1: Unscreened cables - Grade 1
794 EN 50441-2:2012             Cables for indoor residential telecommunication              NC   12 160 MECMA
                                installations -- Part 2: Screened cables - Grade 1
795 EN 50441-4:2012             Cables for indoor residential telecommunication              NC   11 160 MECMA
                                installations -- Part 4: Cables up to 1 200 MHz - Grade 3

796 EN 50342-1:2006/A1:2011     Lead-acid starter batteries -- Part 1: General             NC     4 161 MECMA
                                requirements and methods of test
797 EN 61951-2:2011             Secondary cells and batteries containing alkaline or other NC     28 161 MECMA
                                non-acid electrolytes - Portable sealed rechargeable
                                single cells -- Part 2: Nickel-metal hydride

798 EN 61960:2011               Secondary cells and batteries containing alkaline or other NC     16 161 MECMA
                                non-acid electrolytes - Secondary lithium cells and
                                batteries for portable applications
799 EN 62282-3-100:2012         Fuel cell technologies -- Part 3-100: Stationary fuel cell   NC   94 161 MECMA
                                power systems - Safety
800 EN 62282-2:2012             Fuel cell technologies -- Part 2: Fuel cell modules          NC   43 161 MECMA
801 EN 62282-3-200:2012         Fuel cell technologies -- Part 3-200: Stationary fuel cell   NC   78 161 MECMA
                                power systems - Performance test methods
802 EN 62059-32-1:2012          Electricity metering equipment - Dependability -- Part 32-   NC   15 164 MECMA
                                1: Durability - Testing of the stability of metrological
                                characteristics by applying elevated temperature

803 EN 13480-1:2012             Metallic industrial piping - Part 1: General                 NC   12 169 MECMA
804 EN 13480-2:2012             Metallic industrial piping - Part 2: Materials               NC   56 169 MECMA
805 EN 13480-3:2012        Metallic industrial piping - Part 3: Design and calculation   NC   202 169 MECMA

806 EN 13480-4:2012        Metallic industrial piping - Part 4: Fabrication and          NC   35 169 MECMA
                           installation
807 EN 13480-5:2012        Metallic industrial piping - Part 5: Inspection and testing   NC   28 169 MECMA

808 EN 13480-6:2012        Metallic industrial piping - Part 6: Additional requirements NC    17 169 MECMA
                           for buried piping
809 EN 13480-8:2012        Metallic industrial piping - Part 8: Additional requirements NC    29 169 MECMA
                           for aluminium and aluminium alloy piping

810 EN ISO 13503-1:2011    Petroleum and natural gas industries - Completion fluids      NC   20 169 MECMA
                           and materials - Part 1: Measurement of viscous
                           properties of completion fluids (ISO 13503-1:2011)

811 EN 13575:2012          Static thermoplastic tanks for the above ground storage       NC   20 169 MECMA
                           of chemicals — Blow moulded or rotationally moulded
                           polyethylene tanks — Requirements and test methods

812 EN ISO 13628-15:2011   Petroleum and natural gas industries - Design and             NC   71 169 MECMA
                           operation of subsea production systems - Part 15:
                           Subsea structures and manifolds (ISO 13628-15:2011)

813 EN ISO 13678:2012      Petroleum and natural gas industries - Evaluation and         NC   44 169 MECMA
                           testing of thread compounds for use with casing, tubing,
                           line pipe and drill stem elements (ISO 13678:2010)

814 EN ISO 13706:2011      Petroleum, petrochemical and natural gas industries - Air- NC      139 169 MECMA
                           cooled heat exchangers (ISO 13706:2011)
815 EN ISO 15546:2011      Petroleum and natural gas industries - Aluminium alloy     NC      34 169 MECMA
                           drill pipe (ISO 15546:2011)
816 EN ISO 20312:2011      Petroleum and natural gas industries - Design and          NC      45 169 MECMA
                           operating limits of drill strings with aluminium alloy
                           components (ISO 20312:2011)
817 EN ISO 23936-2:2011    Petroleum, petrochemical and natural gas industries -       NC     65 169 MECMA
                           Non-metallic materials in contact with media related to oil
                           and gas production - Part 2: Elastomers (ISO 23936-
                           2:2011)
818 EN 12258-1:2012        Aluminium and aluminium alloys - Terms and definitions - NC        73 170 MECMA
                           Part 1: General terms
819 EN 1172:2011           Copper and copper alloys - Sheet and strip for building   NC       10 171 MECMA
                           purposes
820 EN 1971-1:2011         Copper and copper alloys - Eddy current test for          NC        6 171 MECMA
                           measuring defects on seamless round copper and
                           copper alloy tubes - Part 1: Test with an encircling test
                           coil on the outer surface
821 EN 1971-2:2011         Copper and copper alloys - Eddy current test for            NC      6 171 MECMA
                           measuring defects on seamless round copper and
                           copper alloy tubes - Part 2: Test with an internal probe on
                           the inner surface
822 EN 12449:2012          Copper and copper alloys - Seamless, round tubes for          NC   23 171 MECMA
                           general purposes
823 EN 12451:2012          Copper and copper alloys - Seamless, round tubes for          NC   16 171 MECMA
                           heat exchangers
824 EN 12452:2012          Copper and copper alloys - Rolled, finned, seamless           NC   17 171 MECMA
                           tubes for heat exchangers
825 EN 15022-4:2011        Copper and copper alloys - Determination of tin content -     NC    8 171 MECMA
                           Part 4: Medium tin content - Flame atomic absorption
                           spectrometric method (FAAS)
826 EN 16090:2011          Copper and copper alloys - Estimation of average grain        NC    5 171 MECMA
                           size by ultrasound
827 EN 16117-1:2011       Copper and copper alloys - Determination of copper             NC   9 171 MECMA
                          content - Part 1: Electrolytic determination of copper in
                          materials with copper content less than 99,85 %
828 EN 61340-4-4:2012     Electrostatics -- Part 4-4: Standard test methods for          NC   42 175 MECMA
                          specific applications - Electrostatic classification of
                          flexible intermediate bulk containers (FIBC)
829 EN 10218-1:2012       Steel wire and wire products - General - Part 1: Test          NC   8 184 MECMA
                          methods
830 EN 10218-2:2012       Steel wire and wire products - General - Part 2: Wire          NC   5 184 MECMA
                          dimensions and tolerances
831 EN 10245-1:2011       Steel wire and wire products - Organic coatings on steel       NC   18 184 MECMA
                          wire - Part 1: General rules
832 EN 10245-2:2011       Steel wire and wire products - Organic coatings on steel       NC   7 184 MECMA
                          wire - Part 2: PVC finished wire
833 EN 10245-3:2011       Steel wire and wire products - Organic coatings on steel       NC   7 184 MECMA
                          wire - Part 3: PE coated wire
834 EN 10245-4:2011       Steel wire and wire products - Organic coatings on steel       NC   9 184 MECMA
                          wire - Part 4: Polyester coated wire
835 EN 10245-5:2011       Steel wire and wire products - Organic coatings on steel       NC   7 184 MECMA
                          wire - Part 5: Polyamide coated wire
836 EN 10257-1:2011       Zinc or zinc alloy coated non-alloy steel wire for             NC   6 184 MECMA
                          armouring either power cables or telecommunication
                          cables - Part 1: Land cables
837 EN 10257-2:2011       Zinc or zinc alloy coated non-alloy steel wire for             NC   7 184 MECMA
                          armouring either power cables or telecommunication
                          cables - Part 2: Submarine cables

838 EN 10264-1:2012       Steel wire and wire products - Steel wire for ropes - Part     NC   7 184 MECMA
                          1: General requirements
839 EN 10264-2:2012       Steel wire and wire products - Steel wire for ropes - Part     NC   7 184 MECMA
                          2: Cold drawn non alloy steel wire for ropes for general
                          applications
840 EN 10264-3:2012       Steel wire and wire products - Steel wire for ropes - Part NC       9 184 MECMA
                          3: Round and shaped non alloyed steel wire for high duty
                          applications
841 EN 10264-4:2012       Steel wire and wire products - Steel wire for ropes - Part     NC   5 184 MECMA
                          4: Stainless steel wire
842 EN 10270-1:2011       Steel wire for mechanical springs - Part 1: Patented cold      NC   20 184 MECMA
                          drawn unalloyed spring steel wire
843 EN 10270-2:2011       Steel wire for mechanical springs - Part 2: Oil hardened       NC   13 184 MECMA
                          and tempered spring steel wire
844 EN 10270-3:2011       Steel wire for mechanical springs - Part 3: Stainless          NC   16 184 MECMA
                          spring steel wire
845 EN ISO 6224:2011      Thermoplastics hoses, textile-reinforced, for general-         NC   8 189 MECMA
                          purpose water applications - Specification (ISO
                          6224:2011)
846 EN ISO 10619-1:2011   Rubber and plastics hoses and tubing - Measurement of          NC   11 189 MECMA
                          flexibility and stiffness - Part 1: Bending tests at ambient
                          temperature (ISO 10619-1:2011)

847 EN ISO 10619-2:2011   Rubber and plastics hoses and tubing - Measurement of          NC   9 189 MECMA
                          flexibility and stiffness - Part 2: Bending tests at sub-
                          ambient temperatures (ISO 10619-2:2011)

848 EN ISO 10619-3:2011   Rubber and plastics hoses and tubing - Measurement of NC            6 189 MECMA
                          flexibility and stiffness - Part 3: Bending tests at high and
                          low temperatures (ISO 10619-3:2011)

849 EN ISO 28017:2011     Rubber hoses and hose assemblies, wire or textile              NC   17 189 MECMA
                          reinforced, for dredging applications - Specification (ISO
                          28017:2011)
850 EN ISO 30013:2011     Rubber and plastics hoses - Methods of exposure to            NC   19 189 MECMA
                          laboratory light sources - Determination of changes in
                          colour, appearance and other physical properties (ISO
                          30013:2011)
851 EN ISO 20877:2011     Footwear - Test methods for whole shoe - Thermal           NC      4 190 MECMA
                          insulation (ISO 20877:2011)
852 EN 60068-2-83:2011    Environmental testing -- Part 2-83: Tests - Test Tf:       NC      24 193 MECMA
                          Solderability testing of electronic components for surface
                          mounting devices (SMD) by the wetting balance method
                          using solder paste
853 EN 62137-3:2012       Electronics assembly technology -- Part 3: Selection          NC   36 193 MECMA
                          guidance of environmental and endurance test methods
                          for solder joints
854 EN ISO 9906:2012      Rotodynamic pumps - Hydraulic performance acceptance NC            53 201 MECMA
                          tests - Grades 1, 2 and 3 (ISO 9906:2012)

855 EN ISO 17769-1:2012   Liquid pumps and installation - General terms, definitions, NC     44 201 MECMA
                          quantities, letter symbols and units - Part 1: Liquid pumps
                          (ISO 17769-1:2012)
856 EN ISO 17769-2:2012   Liquid pumps and installation - General terms, definitions, NC     8 201 MECMA
                          quantities, letter symbols and units - Part 2: Pumping
                          System (ISO 17769-2:2012)
857 EN 10294-2:2012       Hollow bars for machining - Technical delivery conditions - NC     17 202 MECMA
                          Part 2: Stainless steels with specified machinability
                          properties
858 EN 927-3:2012         Paints and varnishes - Coating materials and coating          NC   18 203 MECMA
                          systems for exterior wood - Part 3: Natural weathering
                          test
859 EN ISO 1518-2:2011    Paints and varnishes - Determination of scratch               NC   7 203 MECMA
                          resistance - Part 2: Variable-loading method (ISO 1518-
                          2:2011)
860 EN ISO 2431:2011      Paints and varnishes - Determination of flow time by use NC        14 203 MECMA
                          of flow cups (ISO 2431:2011)
861 EN ISO 2812-3:2012    Paints and varnishes - Determination of resistance to    NC        8 203 MECMA
                          liquids - Part 3: Method using an absorbent medium (ISO
                          2812-3:2012)
862 EN ISO 4628-6:2011    Paints and varnishes - Evaluation of degradation of           NC   7 203 MECMA
                          coatings - Designation of quantity and size of defects,
                          and of intensity of uniform changes in appearance - Part
                          6: Assessment of degree of chalking by tape method
                          (ISO 4628-6:2011)
863 EN ISO 6272-1:2011    Paints and varnishes - Rapid-deformation (impact              NC   8 203 MECMA
                          resistance) tests - Part 1: Falling-weight test, large-area
                          indenter (ISO 6272-1:2011)
864 EN ISO 6272-2:2011    Paints and varnishes - Rapid-deformation (impact              NC   8 203 MECMA
                          resistance) tests - Part 2: Falling-weight test, small-area
                          indenter (ISO 6272-2:2011)
865 EN ISO 7783:2011      Paints and varnishes - Determination of water-vapour          NC   20 203 MECMA
                          transmission properties - Cup method (ISO 7783:2011)

866 EN ISO 8503-1:2012    Preparation of steel substrates before application of         NC   11 203 MECMA
                          paints and related products - Surface roughness
                          characteristics of blast-cleaned steel substrates - Part 1:
                          Specifications and definitions for ISO surface profile
                          comparators for the assessment of abrasive blast-
                          cleaned surfaces (ISO 8503-1:2012)
867 EN ISO 8503-2:2012    Preparation of steel substrates before application of        NC    10 203 MECMA
                          paints and related products - Surface roughness
                          characteristics of blast-cleaned steel substrates - Part 2:
                          Method for the grading of surface profile of abrasive blast-
                          cleaned steel - Comparator procedure (ISO 8503-2:2012)
868 EN ISO 8503-3:2012    Preparation of steel substrates before application of       NC    15 203 MECMA
                          paints and related products - Surface roughness
                          characteristics of blast-cleaned steel substrates - Part 3:
                          Method for the calibration of ISO surface profile
                          comparators and for the determination of surface profile -
                          Focusing microscope procedure (ISO 8503-3:2012)


869 EN ISO 8503-4:2012    Preparation of steel substrates before application of       NC    11 203 MECMA
                          paints and related products - Surface roughness
                          characteristics of blast-cleaned steel substrates - Part 4:
                          Method for the calibration of ISO surface profile
                          comparators and for the determination of surface profile -
                          Stylus instrument procedure (ISO 8503-4:2012)


870 EN ISO 9117-6:2012    Paints and varnishes - Drying tests - Part 6: Print-free     NC   6 203 MECMA
                          test (ISO 9117-6:2012)
871 EN ISO 9227:2012      Corrosion tests in artificial atmospheres - Salt spray tests NC   23 203 MECMA
                          (ISO 9227:2012)
872 EN ISO 11127-1:2011   Preparation of steel substrates before application of        NC   8 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 1: Sampling (ISO
                          11127-1:2011)
873 EN ISO 11127-2:2011   Preparation of steel substrates before application of       NC    6 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 2: Determination
                          of particle size distribution (ISO 11127-2:2011)

874 EN ISO 11127-3:2011   Preparation of steel substrates before application of       NC    6 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 3: Determination
                          of apparent density (ISO 11127-3:2011)

875 EN ISO 11127-4:2011   Preparation of steel substrates before application of     NC      5 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 4: Assessment of
                          hardness by a glass slide test (ISO 11127-4:2011)

876 EN ISO 11127-5:2011   Preparation of steel substrates before application of       NC    6 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 5: Determination
                          of moisture (ISO 11127-5:2011)
877 EN ISO 11127-6:2011   Preparation of steel substrates before application of       NC    6 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 6: Determination
                          of water-soluble contaminants by conductivity
                          measurement (ISO 11127-6:2011)
878 EN ISO 11127-7:2011   Preparation of steel substrates before application of       NC    6 203 MECMA
                          paints and related products - Test methods for non-
                          metallic blast-cleaning abrasives - Part 7: Determination
                          of water-soluble chlorides (ISO 11127-7:2011)

879 EN ISO 12137:2011     Paints and varnishes - Determination of mar resistance      NC    7 203 MECMA
                          (ISO 12137:2011)
880 EN ISO 13076:2012     Paints and varnishes - Lighting and procedure for visual    NC    7 203 MECMA
                          assessments of coatings (ISO 13076:2012)
881 EN 13523-17:2011      Coil coated metals - Test methods - Part 17: Adhesion of    NC    5 203 MECMA
                          strippable films
882 EN 13523-20:2011      Coil coated metals - Test methods - Part 20: Foam           NC    4 203 MECMA
                          adhesion
883 EN ISO 13632:2012     Binders for paints and varnishes - Rosin - Sampling and     NC    7 203 MECMA
                          sample preparation for colour measurement (ISO
                          13632:2012)
884 EN ISO 16014-5:2012   Plastics - Determination of average molecular mass and      NC   21 203 MECMA
                          molecular mass distribution of polymers using size-
                          exclusion chromatography - Part 5: Method using light-
                          scattering detection (ISO 16014-5:2012)
885 EN 16105:2011         Paints and varnishes - Laboratory method for                NC   10 203 MECMA
                          determination of release of substances from coatings in
                          intermittent contact with water
886 EN 50491-4-1:2012     General requirements for Home and Building Electronic       NC   27 207 MECMA
                          Systems (HBES) and Building Automation and Control
                          Systems (BACS) -- Part 4-1: General functional safety
                          requirements for products intended to be integrated in
                          Building Electronic Systems (HBES) and Building
                          Automation and Control Systems (BACS)


887 EN 15583-2:2012       Winter maintenance equipment - Snow ploughs - Part 2:       NC    5 218 MECMA
                          Testing criteria and their requirements
888 EN 15906:2011         Winter maintenance equipment - Snow removal                 NC    7 218 MECMA
                          machines with rotating tools - Specification and clearing
                          capacity
889 EN 16031:2012         Adjustable telescopic aluminium props - Product          NC      20 218 MECMA
                          specifications, design and assessment by calculation and
                          tests
890 EN ISO 536:2012       Paper and board - Determination of grammage (ISO            NC    7 221 MECMA
                          536:2012)
891 EN ISO 1974:2012      Paper - Determination of tearing resistance - Elmendorf     NC   15 221 MECMA
                          method (ISO 1974:2012)
892 EN ISO 3035:2011      Corrugated fibreboard - Determination of flat crush         NC    8 221 MECMA
                          resistance (ISO 3035:2011)
893 EN ISO 12625-1:2011   Tissue paper and tissue products - Part 1: General          NC   19 221 MECMA
                          guidance on terms (ISO 12625-1:2011)
894 EN ISO 15320:2011     Pulp, paper and board - Determination of                    NC   10 221 MECMA
                          pentachlorophenol in an aqueous extract (ISO
                          15320:2011)
895 EN 61394:2011         Overhead lines - Requirements for greases for               NC   13 224 MECMA
                          aluminium, aluminium alloy and steel bare conductors

896 EN 267:2009+A1:2011   Automatic forced draught burners for liquid fuels           NC   68 225 MECMA
897 EN 1196:2011          Domestic and non-domestic gas-fired air heaters -           NC   20 225 MECMA
                          Supplementary requirements for condensing air heaters

898 EN 12952-2:2011       Water-tube boilers and auxiliary installations - Part 2:    NC   32 225 MECMA
                          Materials for pressure parts of boilers and accessories

899 EN 12952-3:2011       Water-tube boilers and auxiliary installations - Part 3:    NC   87 225 MECMA
                          Design and calculation for pressure parts of the boiler

900 EN 12952-5:2011       Water-tube boilers and auxiliary installations - Part 5:    NC   73 225 MECMA
                          Workmanship and construction of pressure parts of the
                          boiler
901 EN 12952-6:2011       Water-tube boilers and auxiliary installations - Part 6:    NC   34 225 MECMA
                          Inspection during construction; documentation and
                          marking of pressure parts of the boiler
902 EN 12953-1:2012       Shell boilers - Part 1: General                             NC   19 225 MECMA
903 EN 12953-13:2012      Shell boilers - Part 13: Operating instructions             NC    4 225 MECMA
904 EN 12953-2:2012       Shell boilers - Part 2: Materials for pressure parts of     NC   11 225 MECMA
                          boilers and accessories
905 EN 15502-1:2012       Gas-fired heating boilers - Part 1: General requirements    NC   118 225 MECMA
                          and tests
906 EN ISO 10685-1:2011   Ophthalmic optics - Spectacle frames and sunglasses         NC   16 230 MECMA
                          electronic catalogue and identification - Part 1: Product
                          identification and electronic catalogue product hierarchy
                          (ISO 10685-1:2011)
907 EN ISO 10943:2011             Ophthalmic instruments - Indirect ophthalmoscopes (ISO NC        6 230 MECMA
                                  10943:2011)
908 EN ISO 11979-2:1999/AC:2005   Ophthalmic implants - Intraocular lenses - Part 2: Optical ER    1 230 MECMA
                                  properties and test methods (ISO 11979-2:1999)

909 EN ISO 11979-7:2006/A1:2012   Ophthalmic implants - Intraocular lenses - Part 7: Clinical NC   6 230 MECMA
                                  investigations - Amendment 1 (ISO 11979-7:2006/Amd
                                  1:2012)
910 EN ISO 11987:2012             Ophthalmic optics - Contact lenses - Determination of      NC    11 230 MECMA
                                  shelf-life (ISO 11987:2012)
911 EN ISO 11990-1:2011           Lasers and laser-related equipment - Determination of      NC    14 230 MECMA
                                  laser resistance of tracheal tubes - Part 1: Tracheal tube
                                  shaft (ISO 11990-1:2011)
912 EN ISO 19980:2012             Ophthalmic instruments - Corneal topographers (ISO          NC   20 230 MECMA
                                  19980:2012)
913 EN 1440:2008+A1:2012          LPG equipment and accessories - Periodic inspection of      NC   34 231 MECMA
                                  transportable refillable LPG cylinders
914 EN ISO 10961:2012             Gas cylinders - Cylinder bundles - Design, manufacture,     NC   22 231 MECMA
                                  testing and inspection (ISO 10961:2010)

915 EN ISO 11114-1:2012           Gas cylinders - Compatibility of cylinder and valve         NC   31 231 MECMA
                                  materials with gas contents - Part 1: Metallic materials
                                  (ISO 11114-1:2012)
916 EN ISO 11363-1:2010/AC:2012   Gas cylinders - 17E and 25E taper threads for connection ER      1 231 MECMA
                                  of valves to gas cylinders - Part 1: Specifications -
                                  Technical Corrigendum 2 (ISO 11363-1:2010/Cor 2:2012)

917 EN ISO 11372:2011             Gas cylinders - Acetylene cylinders - Filling conditions NC      14 231 MECMA
                                  and filling inspection (ISO 11372:2011)
918 EN 12245:2009+A1:2011         Transportable gas cylinders - Fully wrapped composite    NC      44 231 MECMA
                                  cylinders
919 EN 12493:2008+A1:2012         LPG equipment and accessories - Welded steel tanks for NC        44 231 MECMA
                                  liquefied petroleum gas (LPG) - Road tankers design and
                                  manufacture
920 EN 13110:2012                 LPG equipment and accessories - Transportable               NC   31 231 MECMA
                                  refillable welded aluminium cylinders for liquefied
                                  petroleum gas (LPG) - Design and construction
921 EN 13799:2012                 LPG equipment and accessories - Contents gauges for         NC   19 231 MECMA
                                  Liquefied Petroleum Gas (LPG) pressure vessels

922 EN 14638-3:2010/AC:2012       Transportable gas cylinders - Refillable welded             ER   1 231 MECMA
                                  receptacles of a capacity not exceeding 150 litres - Part
                                  3: Welded carbon steel cylinders made to a design
                                  justified by experimental methods
923 EN 14678-2:2007+A1:2012       LPG equipment and accessories - Construction and        NC       14 231 MECMA
                                  performance of LPG equipment for automotive filling
                                  stations - Part 2: Components other than dispensers and
                                  installation requirements
924 EN 15202:2012                 LPG equipment and accessories - Essential operational       NC   17 231 MECMA
                                  dimensions for LPG cylinder valve outlet and associated
                                  equipment connections
925 EN 12201-1:2011               Plastics piping systems for water supply, and for           NC   17 237 MECMA
                                  drainage and sewerage under pressure - Polyethylene
                                  (PE) - Part 1: General
926 EN 12201-2:2011               Plastics piping systems for water supply, and for           NC   19 237 MECMA
                                  drainage and sewerage under pressure - Polyethylene
                                  (PE) - Part 2: Pipes
927 EN 12201-3:2011               Plastics piping systems for water supply, and for           NC   28 237 MECMA
                                  drainage and sewerage under pressure - Polyethylene
                                  (PE) - Part 3: Fittings
928 EN 12201-5:2011               Plastics piping systems for water supply, and for          NC   12 237 MECMA
                                  drainage and sewerage under pressure - Polyethylene
                                  (PE) - Part 5: Fitness for purpose of the system

929 EN ISO 13260:2011             Thermoplastics piping systems for non-pressure          NC      12 237 MECMA
                                  underground drainage and sewerage - Test method for
                                  resistance to combined temperature cycling and external
                                  loading (ISO 13260:2010)
930 EN 50564:2011                 Electrical and electronic household and office equipment - NC   38 238 MECMA
                                  Measurement of low power consumption

931 EN 60456:2011                 Clothes washing machines for household use - Methods NC         160 238 MECMA
                                  for measuring the performance
932 EN 60456:2011/AC:2011         Clothes washing machines for household use - Methods ER          1 238 MECMA
                                  for measuring the performance
933 EN 60704-2-10:2011            Household and similar electrical appliances - Test code NC      11 238 MECMA
                                  for the determination of airborne acoustical noise -- Part
                                  2-10: Particular requirements for electric cooking ranges,
                                  ovens, grills, microwave ovens and any combination of
                                  these
934 EN 50408:2008/A1:2011         Household and similar electrical appliances - Safety -     NC    2 239 MECMA
                                  Particular requirements for cab heaters for vehicles
935 EN 60335-1:2002/A15:2011      Household and similar electrical appliances - Safety --    NC    2 239 MECMA
                                  Part 1: General requirements
936 EN 60335-1:2012               Household and similar electrical appliances - Safety --    NC   187 239 MECMA
                                  Part 1: General requirements
937 EN 60335-2-14:2006/A11:2012   Household and similar electrical appliances - Safety --    NC    6 239 MECMA
                                  Part 2-14: Particular requirements for kitchen machines

938 EN 60335-2-15:2002/A11:2012   Household and similar electrical appliances - Safety --    NC    7 239 MECMA
                                  Part 2-15: Particular requirements for appliances for
                                  heating liquids
939 EN 60335-2-16:2003/A2:2012    Household and similar electrical appliances - Safety --    NC    3 239 MECMA
                                  Part 2-16: Particular requirements for food waste
                                  disposers
940 EN 60335-2-25:2012            Household and similar electrical appliances - Safety --    NC   34 239 MECMA
                                  Part 2-25: Particular requirements for microwave ovens,
                                  including combination microwave ovens
941 EN 60335-2-35:2002/A2:2011    Household and similar electrical appliances - Safety --    NC    5 239 MECMA
                                  Part 2-35: Particular requirements for instantaneous
                                  water heaters
942 EN 60335-2-40:2003/A13:2012   Household and similar electrical appliances - Safety --    NC    7 239 MECMA
                                  Part 2-40: Particular requirements for electrical heat
                                  pumps, air-conditioners and dehumidifiers
943 EN 60335-2-44:2002/A2:2012    Household and similar electrical appliances - Safety --    NC    5 239 MECMA
                                  Part 2-44: Particular requirements for ironers
944 EN 60335-2-45:2002/A2:2012    Household and similar electrical appliances - Safety --    NC    3 239 MECMA
                                  Part 2-45: Particular requirements for portable heating
                                  tools and similar appliances
945 EN 60335-2-51:2003/A2:2012    Household and similar electrical appliances - Safety --    NC    3 239 MECMA
                                  Part 2-51: Particular requirements for stationary
                                  circulation pumps for heating and service water
                                  installations
946 EN 60335-2-6:2003/A12:2012    Household and similar electrical appliances - Safety --    NC    3 239 MECMA
                                  Part 2-6: Particular requirements for stationary cooking
                                  ranges, hobs, ovens and similar appliances
947 EN 60335-2-66:2003/A2:2012    Household and similar electrical appliances - Safety --    NC    3 239 MECMA
                                  Part 2-66: Particular requirements for water-bed heaters

948 EN 60335-2-81:2003/A2:2012    Household and similar electrical appliances - Safety --    NC    5 239 MECMA
                                  Part 2-81: Particular requirements for foot warmers and
                                  heating mats
949 EN 60296:2012           Fluids for electrotechnical applications - Unused mineral    NC   24 264 MECMA
                            insulating oils for transformers and switchgear

950 EN 60475:2011           Method of sampling insulating liquids                        NC   24 264 MECMA
951 EN 60567:2011           Oil-filled electrical equipment - Sampling of gases and      NC   58 264 MECMA
                            analysis of free and dissolved gases - Guidance

952 EN 61181:2007/A1:2012   Mineral oil-filled electrical equipment - Application of    NC     3 264 MECMA
                            dissolved gas analysis (DGA) to factory tests on electrical
                            equipment
953 EN 15387:2011           Packaging - Flexible laminate tubes - Test methods to      NC      3 270 MECMA
                            assess the strength of the side seam
954 EN 15969-1:2011         Tanks for transport of dangerous goods - Digital interface NC     71 270 MECMA
                            for the data transfer between tank vehicle and with
                            stationary facilities - Part 1: Protocol specification -
                            Control, measurement and event data
955 EN 15969-2:2011         Tanks for transport of dangerous goods - Digital interface NC     25 270 MECMA
                            for the data transfer between tank vehicle and with
                            stationary facilities - Part 2: Commercial and logistic data

956 EN 16063:2011           Packaging - Rigid plastic containers - Nomenclature of       NC    2 270 MECMA
                            plastic finishes
957 EN 16064:2011           Packaging - Rigid plastic containers - PET finish 30/25      NC    2 270 MECMA
                            High (18,5)
958 EN 16065:2011           Packaging - Rigid plastic containers - PET finish 30/25      NC    2 270 MECMA
                            Low (16,8)
959 EN 16066:2011           Packaging - Rigid plastic containers - PET finish 26,7       NC    2 270 MECMA
                            (lead 6,35)
960 EN 16067:2011           Packaging - Rigid plastic containers - PET finish 26,7       NC    2 270 MECMA
                            (lead 9,00)
961 EN 16068:2011           Packaging - Rigid plastic containers - PET finish 38         NC    2 270 MECMA
962 EN ISO 11930:2012       Cosmetics - Microbiology - Evaluation of the antimicrobial   NC   25 298 MECMA
                            protection of a cosmetic product (ISO 11930:2012)

963 EN ISO 24442:2011       Cosmetics - Sun protection test methods - In vivo            NC   26 298 MECMA
                            determination of sunscreen UVA protection (ISO
                            24442:2011)
964 EN ISO 24443:2012       Determination of sunscreen UVA photoprotection in vitro NC        26 298 MECMA
                            (ISO 24443:2012)
965 EN 30-1-2:2012          Domestic cooking appliances burning gas - Safety - Part NC        17 305 MECMA
                            1-2: Appliances having forced-convection ovens and/or
                            grills
966 EN 30-1-4:2012          Domestic cooking appliances burning gas - Safety - Part NC        107 305 MECMA
                            1-4: Appliances having one or more burners with an
                            automatic burner control system
967 EN 126:2012             Multifunctional controls for gas burning appliances          NC   11 305 MECMA
968 EN 298:2012             Automatic burner control systems for burners and             NC   44 305 MECMA
                            appliances burning gaseous or liquid fuels
969 EN 417:2012             Non-refillable metallic gas cartridges for liquefied         NC   27 305 MECMA
                            petroleum gases, with or without a valve, for use with
                            portable appliances - Construction, inspection, testing
                            and marking
970 EN 498:2012             Specification for dedicated liquefied petroleum gas          NC   40 305 MECMA
                            appliances - Barbecues for outdoor use contact grills
                            included
971 EN 13611:2007+A2:2011   Safety and control devices for gas burners and gas           NC   95 305 MECMA
                            burning appliances - General requirements
972 EN 61558-2-15:2012      Safety of transformers, reactors, power supply units and     NC   17 312 MECMA
                            combinations thereof -- Part 2-15: Particular
                            requirements and tests for isolating transformers for the
                            supply of medical locations
973 EN 1425:2012                Bitumen and bituminous binders - Characterization of           NC   4 320 MECMA
                                perceptible properties
974 EN ISO 4404-1:2012          Petroleum and related products - Determination of the          NC   12 320 MECMA
                                corrosion resistance of fire-resistant hydraulic fluids - Part
                                1: Water-containing fluids (ISO 4404-1:2012)

975 EN ISO 13032:2012           Petroleum products - Determination of low concentration NC          17 320 MECMA
                                of sulfur in automotive fuels - Energy-dispersive X-ray
                                fluorescence spectrometric method (ISO 13032:2012)

976 EN 14769:2012               Bitumen and bituminous binders - Accelerated long-term NC           10 320 MECMA
                                ageing conditioning by a Pressure Ageing Vessel (PAV)

977 EN 14770:2012               Bitumen and bituminous binders - Determination of             NC    15 320 MECMA
                                complex shear modulus and phase angle - Dynamic
                                Shear Rheometer (DSR)
978 EN 14771:2012               Bitumen and bituminous binders - Determination of the         NC    9 320 MECMA
                                flexural creep stiffness - Bending Beam Rheometer
                                (BBR)
979 EN 16091:2011               Liquid petroleum products - Middle distillates and fatty      NC    8 320 MECMA
                                acid methyl ester (FAME) fuels and blends -
                                Determination of oxidation stability by rapid small scale
                                oxidation method
980 EN 16135:2011               Automotive fuels - Determination of manganese content         NC    8 320 MECMA
                                in unleaded petrol - Flame atomic absorption
                                spectrometric method (FAAS)
981 EN 16136:2011               Automotive fuels - Determination of manganese content         NC    8 320 MECMA
                                in unleaded petrol - Inductively coupled plasma optical
                                emission spectrometry (ICP OES) method

982 EN 16144:2012               Liquid petroleum products - Determination of ignition         NC    18 320 MECMA
                                delay and derived cetane number (DCN) of middle
                                distillate fuels - Fixed range injection period, constant
                                volume combustion chamber method
983 EN 16345:2012               Bitumen and bituminous binders - Determination of efflux NC         5 320 MECMA
                                time of bituminous emulsions using the Redwood No. II
                                Viscometer
984 EN ISO 20846:2011           Petroleum products - Determination of sulfur content of       NC    15 320 MECMA
                                automotive fuels - Ultraviolet fluorescence method (ISO
                                20846:2011)
985 EN ISO 14021:2001/A1:2011   Environmental labels and declarations - Self-declared         NC    7 323 MECMA
                                environmental claims (Type II environmental labelling) -
                                Amendment 1 (ISO 14021:1999/Amd 1:2011)

986 EN ISO 14045:2012           Environmental management - Eco-efficiency assessment NC             38 323 MECMA
                                of product systems - Principles, requirements and
                                guidelines (ISO 14045:2012)
987 EN ISO 14051:2011           Environmental management - Material flow cost               NC      42 323 MECMA
                                accounting - General framework (ISO 14051:2011)
988 EN 994:2012                 Textile floor coverings - Determination of the side length, NC      4 324 MECMA
                                squareness and straightness of tiles
989 EN ISO 10580:2012           Resilient, textile and laminate floor coverings - Test      NC      27 324 MECMA
                                method for volatile organic compound (VOC) emissions
                                (ISO 10580:2010)
990 EN ISO 10582:2012           Resilient floor coverings - Heterogeneous poly(vinyl       NC       7 324 MECMA
                                chloride) floor coverings - Specification (ISO 10582:2010)

991 EN ISO 10595:2012           Resilient floor coverings - Semi-flexible/vinylcomposition    NC    6 324 MECMA
                                (VCT) poly(vinyl chloride) floor tiles - Specification (ISO
                                10595:2010)
992 EN ISO 10874:2012           Resilient, textile and laminate floor coverings -             NC    3 324 MECMA
                                Classification (ISO 10874:2009)
 993 EN 15772:2012             Textile floor coverings - Minimum requirements for             NC   10 324 MECMA
                               needled floor coverings for single usage in events of
                               limited duration
 994 EN 16094:2012             Laminate floor coverings - Test method for the                 NC   7 324 MECMA
                               determination of micro-scratch resistance
 995 EN ISO 23996:2012         Resilient floor coverings - Determination of density (ISO      NC   4 324 MECMA
                               23996:2007)
 996 EN ISO 23997:2012         Resilient floor coverings - Determination of mass per unit     NC   3 324 MECMA
                               area (ISO 23997:2007)
 997 EN ISO 23999:2012         Resilient floor coverings - Determination of dimensional       NC   7 324 MECMA
                               stability and curling after exposure to heat (ISO
                               23999:2008)
 998 EN ISO 24011:2012         Resilient floor coverings - Specification for plain and   NC        6 324 MECMA
                               decorative linoleum (ISO 24011:2009)
 999 EN ISO 24340:2012         Resilient floor coverings - Determination of thickness of NC        4 324 MECMA
                               layers (ISO 24340:2006)
1000 EN ISO 24341:2012         Resilient and textile floor coverings - Determination of  NC        4 324 MECMA
                               length, width and straightness of sheet (ISO 24341:2006)

1001 EN ISO 24342:2012         Resilient and textile floor-coverings - Determination of       NC   8 324 MECMA
                               side length, edge, straightness and squareness of tiles
                               (ISO 24342:2007)
1002 EN ISO 24343-1:2012       Resilient and laminate floor coverings - Determination of      NC   4 324 MECMA
                               indentation and residual indentation - Part 1: Residual
                               indentation (ISO 24343-1:2007)
1003 EN ISO 24344:2012         Resilient floor coverings - Determination of flexibility and   NC   6 324 MECMA
                               deflection (ISO 24344:2008)
1004 EN ISO 24345:2012         Resilient floor coverings - Determination of peel              NC   4 324 MECMA
                               resistance (ISO 24345:2006)
1005 EN ISO 24346:2012         Resilient floor coverings - Determination of overall           NC   5 324 MECMA
                               thickness (ISO 24346:2006)
1006 EN ISO 26985:2012         Resilient floor coverings - Identification of linoleum and     NC   5 324 MECMA
                               determination of cement content and ash residue (ISO
                               26985:2008)
1007 EN ISO 26986:2012         Resilient floor coverings - Expanded (cushioned)               NC   6 324 MECMA
                               poly(vinyl chloride) floor covering - Specification (ISO
                               26986:2010)
1008 EN ISO 26987:2012         Resilient floor coverings - Determination of staining and NC        5 324 MECMA
                               resistance to chemicals (ISO 26987:2008)
1009 EN 1143-1:2012            Secure storage units - Requirements, classification and NC          35 336 MECMA
                               methods of test for resistance to burglary - Part 1: Safes,
                               ATM safes, strongroom doors and strongrooms

1010 EN 12703:2012             Adhesives for paper and board, packaging and                   NC   4 338 MECMA
                               disposable sanitary products - Determination of low
                               temperature flexibility or cold crack temperature
1011 EN 12704:2012             Adhesives for paper and board, packaging and                   NC   3 338 MECMA
                               disposable sanitary products - Determination of foam
                               formation for aqueous adhesives
1012 EN 61936-1:2010/AC:2012   Power installations exceeding 1 kV a.c. -- Part 1:             ER   1 340 MECMA
                               Common rules
1013 EN ISO 6974-1:2012        Natural gas - Determination of composition and                 NC   42 357 MECMA
                               associated uncertainty by gas chromatography - Part 1:
                               General guidelines and calculation of composition (ISO
                               6974-1:2012)
1014 EN ISO 6974-2:2012        Natural gas - Determination of composition and                 NC   14 357 MECMA
                               associated uncertainty by gas chromatography - Part 2:
                               Uncertainty calculations (ISO 6974-2:2012)
1015 EN 12007-1:2012           Gas infrastructure - Pipelines for maximum operating           NC   28 357 MECMA
                               pressure up to and including 16 bar - Part 1: General
                               functional requirements
1016 EN 12007-2:2012                Gas infrastructure - Pipelines for maximum operating    NC      18 357 MECMA
                                    pressure up to and including 16 bar - Part 2: Specific
                                    functional requirements for polyethylene (MOP up to and
                                    including 10 bar)
1017 EN 12007-4:2012                Gas infrastructure - Pipelines for maximum operating       NC   27 357 MECMA
                                    pressure up to and including 16 bar - Part 4: Specific
                                    functional requirements for renovation
1018 EN 12327:2012                  Gas infrastructure - Pressure testing, commissioning and NC     15 357 MECMA
                                    decommissioning procedures - Functional requirements

1019 EN 50563:2011                  External a.c. - d.c. and a.c. - a.c. power supplies –    NC     14 368 MECMA
                                    Determination of no-load power and average efficiency of
                                    active modes
1020 EN 1811:2011/AC:2012           Reference test method for release of nickel from all post ER     1 377 MECMA
                                    assemblies which are inserted into pierced parts of the
                                    human body and articles intended to come into direct and
                                    prolonged contact with the skin
1021 EN 60038:2011                  CENELEC standard voltages                                  NC    9 167 MECTS
1022 EN 16341:2012                  Selection of standards and standard-like documents for     NC    4 229 MECTS
                                    defence products and services - Order of preference

1023 EN ISO 19111-2:2012            Geographic information - Spatial referencing by            NC   16 359 MECTS
                                    coordinates - Part 2: Extension for parametric values
                                    (ISO 19111-2:2009)
1024 EN ISO 19118:2011              Geographic information - Encoding (ISO 19118:2011)         NC   65 359 MECTS

1025 EN ISO 19131:2008/A1:2011      Geographic information - Data product specifications -     NC    5 359 MECTS
                                    Amendment 1: Requirements relating to the inclusion of
                                    an application schema and feature catalogue and the
                                    treatment of coverages in an application schema (ISO
                                    19131:2007/Amd 1:2011)


1026 EN ISO 19143:2012              Geographic information - Filter encoding (ISO             NC    90 359 MECTS
                                    19143:2010)
1027 EN ISO 19144-1:2012            Geographic information - Classification systems - Part 1: NC    31 359 MECTS
                                    Classification system structure (ISO 19144-1:2009)

1028 EN ISO 19144-1:2012/AC:2012    Geographic information - Classification systems - Part 1: ER     1 359 MECTS
                                    Classification system structure - Technical Corrigendum
                                    1 (ISO 19144-1:2009/Cor 1:2012)
1029 EN ISO 19148:2012              Geographic information - Linear referencing (ISO          NC    75 359 MECTS
                                    19148:2012)
1030 EN 60204-33:2011               Safety of machinery - Electrical equipment of machines -- NC    119   23 MMFPS
                                    Part 33: Requirements for semiconductor fabrication
                                    equipment
1031 EN 710:1997+A1:2010/AC:2012    Safety requirements for foundry moulding and               ER    1    47 MMFPS
                                    coremaking machinery and plant associated equipment

1032 EN 15949:2012                  Safety of machinery - Safety requirements for bar mills,   NC   65    47 MMFPS
                                    structural steel mills and wire rod mills
1033 EN ISO 9241-143:2012           Ergonomics of human-system interaction - Part 143:         NC   84    54 MMFPS
                                    Forms (ISO 9241-143:2012)
1034 EN ISO 9241-303:2011           Ergonomics of human-system interaction - Part 303:         NC   44    54 MMFPS
                                    Requirements for electronic visual displays (ISO 9241-
                                    303:2011)
1035 EN ISO 9241-410:2008/A1:2012   Ergonomics of human-system interaction - Part 410:         NC    4    54 MMFPS
                                    Design criteria for physical input devices (ISO 9241-
                                    410:2008/AMD 1:2012)
1036 EN 13861:2011                  Safety of machinery - Guidance for the application of  NC       48    54 MMFPS
                                    ergonomics standards in the design of machinery
1037 EN ISO 26800:2011              Ergonomics - General approach, principles and concepts NC       27    54 MMFPS
                                    (ISO 26800:2011)
1038 EN ISO 28802:2012           Ergonomics of the physical environment - Assessment of NC       25   54 MMFPS
                                 environments by means of an environmental survey
                                 involving physical measurements of the environment and
                                 subjective responses of people (ISO 28802:2012)

1039 EN ISO 28803:2012           Ergonomics of the physical environment - Application of    NC   34   54 MMFPS
                                 international standards to people with special
                                 requirements (ISO 28803:2012)
1040 EN ISO 4254-12:2012         Agricultural machinery - Safety - Part 12: Rotary disc and NC   21   77 MMFPS
                                 drum mowers and flail mowers (ISO 4254-12:2012)

1041 EN ISO 11680-1:2011         Machinery for forestry - Safety requirements and testing   NC   23   77 MMFPS
                                 for pole-mounted powered pruners - Part 1: Machines
                                 fitted with an integral combustion engine (ISO 11680-
                                 1:2011)
1042 EN ISO 11680-2:2011         Machinery for forestry - Safety requirements and testing NC     7    77 MMFPS
                                 for pole-mounted powered pruners - Part 2: Machines for
                                 use with back-pack power source (ISO 11680-2:2011)

1043 EN ISO 11681-1:2011         Machinery for forestry - Portable chain-saw safety         NC   25   77 MMFPS
                                 requirements and testing - Part 1: Chain-saws for forest
                                 service (ISO 11681-1:2011)
1044 EN ISO 11681-2:2011         Machinery for forestry - Portable chain-saw safety         NC   29   77 MMFPS
                                 requirements and testing - Part 2: Chain-saws for tree
                                 service (ISO 11681-2:2011)
1045 EN ISO 11806-1:2011         Agricultural and forestry machinery - Safety requirements NC    29   77 MMFPS
                                 and testing for portable, hand-held, powered brush-
                                 cutters and grass-trimmers - Part 1: Machines fitted with
                                 an integral combustion engine (ISO 11806-1:2011)

1046 EN ISO 11806-2:2011         Agricultural and forestry machinery - Safety requirements NC    8    77 MMFPS
                                 and testing for portable, hand-held, powered brush-
                                 cutters and grass-trimmers - Part 2: Machines for use
                                 with back-pack power unit (ISO 11806-2:2011)

1047 EN ISO 11850:2011           Machinery for forestry - General safety requirements (ISO NC    24   77 MMFPS
                                 11850:2011)
1048 EN ISO 22867:2011           Forestry and gardening machinery - Vibration test code    NC    21   77 MMFPS
                                 for portable hand-held machines with internal combustion
                                 engine - Vibration at the handles (ISO 22867:2011)

1049 EN 15997:2011               All terrain vehicles (ATVs - Quads) - Safety requirements NC    57   78 MMFPS
                                 and test methods
1050 EN 16029:2012               Ride-on, motorized vehicles intended for the              NC    48   78 MMFPS
                                 transportation of persons and not intended for use on
                                 public roads - Single-track two-wheel motor vehicles -
                                 Safety requirements and test methods
1051 EN 693:2001+A2:2011         Machine tools - Safety - Hydraulic presses                 NC   43   79 MMFPS
1052 EN 1114-1:2011              Plastics and rubber machines - Extruders and extrusion     NC   24   79 MMFPS
                                 lines - Part 1: Safety requirements for extruders

1053 EN 12409:2008+A1:2011       Plastics and rubber machines - Thermoforming machines      NC   38   79 MMFPS
                                 - Safety requirements
1054 EN ISO 23125:2010/A1:2012   Machine tools - Safety - Turning machines - Amendment      NC   13   79 MMFPS
                                 1 (ISO 23125:2010/Amd 1:2012)
1055 EN 1554:2012                Conveyor belts - Drum friction testing                     NC    8   84 MMFPS
1056 EN 1570-1:2011              Safety requirements for lifting tables - Part 1: Lifting   NC   55   85 MMFPS
                                 tables serving up to two fixed landings
1057 EN 12999:2011+A1:2012       Cranes - Loader cranes                                     NC   57   85 MMFPS
1058 EN 13001-2:2011/AC:2012     Crane safety - General design - Part 2: Load actions       ER    1   85 MMFPS
1059 EN 13001-3-1:2012         Cranes - General Design - Part 3-1: Limit States and       NC   58   85 MMFPS
                               proof competence of steel structure
1060 EN 13411-8:2011           Terminations for steel wire ropes - Safety - Part 8: Swage NC   10   85 MMFPS
                               terminals and swaging
1061 EN 15700:2011             Safety for conveyor belts for winter sport or leisure use  NC   30   85 MMFPS

1062 EN 15830:2012             Rough-terrain variable reach trucks - Visibility - Test    NC   20   85 MMFPS
                               methods and verification
1063 EN 859:2007+A2:2012       Safety of woodworking machines - Hand fed surface          NC   42 118 MMFPS
                               planing machines
1064 EN 940:2009+A1:2012       Safety of woodworking machines - Combined                  NC   40 118 MMFPS
                               woodworking machines
1065 EN 1870-13:2007+A2:2012   Safety of woodworking machines - Circular sawing           NC   56 118 MMFPS
                               machines - Part 13: Horizontal beam panel sawing
                               machines
1066 EN 1870-14:2007+A2:2012   Safety of woodworking machines - Circular sawing           NC   47 118 MMFPS
                               machines - Part 14: Vertical panel sawing machines
1067 EN 1870-4:2012            Safety of woodworking machines - Circular sawing           NC   56 118 MMFPS
                               machines - Part 4: Multiblade rip sawing machines with
                               manual loading and/or unloading
1068 EN 50545-1:2011           Electrical apparatus for the detection and measurement NC       28 137 MMFPS
                               of toxic and combustible gases in car parks and tunnels --
                               Part 1: General performance requirements and test
                               methods for the detection and measurement of carbon
                               monoxide and nitrogen oxides


1069 EN 60079-11:2012          Explosive atmospheres -- Part 11: Equipment protection     NC   139 137 MMFPS
                               by intrinsic safety "i"
1070 EN 60079-35-1:2011        Explosive atmospheres -- Part 35-1: Caplights for use in   NC   22 137 MMFPS
                               mines susceptible to firedamp - General requirements -
                               Construction and testing in relation to the risk of
                               explosion
1071 EN 60079-35-2:2012        Explosive atmospheres -- Part 35-2: Caplights for use in   NC   12 137 MMFPS
                               mines susceptible to firedamp - Performance and other
                               safety-related matters
1072 EN 14033-3:2009+A1:2011   Railway applications - Track - Railbound construction and NC    45 146 MMFPS
                               maintenance machines - Part 3: General safety
                               requirements
1073 EN 15746-2:2010+A1:2011   Railway applications - Track - Road-rail machines and      NC   65 146 MMFPS
                               associated equipment - Part 2: General safety
                               requirements
1074 EN 15861:2012             Food processing machinery - Smokehouses - Safety and NC         22 148 MMFPS
                               hygiene requirements
1075 EN 1034-16:2012           Safety of machinery - Safety requirements for the design NC     53 154 MMFPS
                               and construction of paper making and finishing machines
                               - Part 16: Paper and board making machines

1076 EN 1034-17:2012           Safety of machinery - Safety requirements for the design NC     47 154 MMFPS
                               and construction of paper making and finishing machines
                               - Part 17: Tissue making machines

1077 EN 1034-26:2012           Safety of machinery - Safety requirements for the design NC     19 154 MMFPS
                               and construction of paper making and finishing machines
                               - Part 26: Roll packaging machines

1078 EN 1034-3:2011            Safety of machinery - Safety requirements for the design NC     31 154 MMFPS
                               and construction of paper making and finishing machines
                               - Part 3: Rereelers and winders
1079 EN 1034-8:2012            Safety of machinery - Safety requirements for the design NC     12 154 MMFPS
                               and construction of paper making and finishing machines
                               - Part 8: Refining plants
1080 EN 13951:2012                 Liquid pumps - Safety requirements - Agrifoodstuffs           NC   24 201 MMFPS
                                   equipment; Design rules to ensure hygiene in use

1081 EN 474-4:2006+A2:2012         Earth-moving machinery - Safety - Part 4: Requirements NC          15 218 MMFPS
                                   for backhoe loaders
1082 EN 474-5:2006+A2:2012         Earth-moving machinery - Safety - Part 5: Requirements NC          17 218 MMFPS
                                   for hydraulic excavators
1083 EN ISO 3450:2011              Earth-moving machinery - Wheeled or high-speed rubber- NC          31 218 MMFPS
                                   tracked machines - Performance requirements and test
                                   procedures for brake systems (ISO 3450:2011)

1084 EN 12001:2012                 Conveying, spraying and placing machines for concrete NC           45 218 MMFPS
                                   and mortar - Safety requirements
1085 EN ISO 19432:2012             Building construction machinery and equipment -         NC         40 218 MMFPS
                                   Portable, hand-held, internal combustion engine driven
                                   cut-off machines - Safety requirements (ISO 19432:2012)

1086 EN 303-5:2012                 Heating boilers - Part 5: Heating boilers for solid fuels, NC      73 225 MMFPS
                                   manually and automatically stoked, nominal heat output
                                   of up to 500 kW - Terminology, requirements, testing and
                                   marking
1087   EN 397:2012                 Industrial safety helmets                                     NC   23   227   MMFPS
1088   EN 795:2012                 Personal fall protection equipment - Anchor devices           NC   35   227   MMFPS
1089   EN 812:2012                 Industrial bump caps                                          NC   18   227   MMFPS
1090   EN 966:2012                 Helmets for airborne sports                                   NC   18   227   MMFPS
1091   EN 1078:2012                Helmets for pedal cyclists and for users of skateboards       NC   14   227   MMFPS
                                   and roller skates
1092 EN 1384:2012                  Helmets for equestrian activities                             NC   16 227 MMFPS
1093 EN 1385:2012                  Helmets for canoeing and white water sports                   NC   14 227 MMFPS
1094 EN ISO 4007:2012              Personal protective equipment - Eye and face protection -     NC   52 227 MMFPS
                                   Vocabulary (ISO 4007:2012)
1095 EN 12492:2012                 Mountaineering equipment - Helmets for mountaineers -         NC   16 227 MMFPS
                                   Safety requirements and test methods

1096 EN 13087-10:2012              Protective helmets - Test methods - Part 10: Resistance       NC   6 227 MMFPS
                                   to radiant heat
1097 EN 13087-2:2012               Protective helmets - Test methods - Part 2: Shock             NC   8 227 MMFPS
                                   absorption
1098 EN 13087-4:2012               Protective helmets - Test methods - Part 4: Retention         NC   5 227 MMFPS
                                   system effectiveness
1099 EN 13087-5:2012               Protective helmets - Test methods - Part 5: Retention         NC   9 227 MMFPS
                                   system strength
1100 EN 13087-6:2012               Protective helmets - Test methods - Part 6: Field of vision   NC   5 227 MMFPS

1101 EN 13484:2012                 Helmets for users of luges                                    NC   16 227 MMFPS
1102 EN 13781:2012                 Protective helmets for drivers and passengers of              NC   16 227 MMFPS
                                   snowmobiles and bobsleighs
1103 EN 14052:2012                 High performance industrial helmets                           NC   21 227 MMFPS
1104 EN 15090:2012                 Footwear for firefighters                                     NC   23 227 MMFPS
1105 EN 16027:2011                 Protective clothing - Gloves with protective effect for       NC   11 227 MMFPS
                                   association football goal keepers
1106 EN 60335-2-36:2002/A11:2012   Household and similar electrical appliances - Safety --       NC   7 239 MMFPS
                                   Part 2-36: Particular requirements for commercial electric
                                   cooking ranges, ovens, hobs and hob elements

1107 EN 60335-2-37:2002/A11:2012   Household and similar electrical appliances - Safety --    NC      6 239 MMFPS
                                   Part 2-37: Particular requirements for commercial electric
                                   deep fat fryers
1108 EN 60335-2-42:2003/A11:2012   Household and similar electrical appliances - Safety --    NC      7 239 MMFPS
                                   Part 2-42: Particular requirements for commercial electric
                                   forced convection ovens, steam cookers and steam-
                                   convection ovens
1109 EN 60335-2-47:2003/A11:2012   Household and similar electrical appliances - Safety --    NC    6 239 MMFPS
                                   Part 2-47: Particular requirements for commercial electric
                                   boiling pans
1110 EN 60335-2-48:2003/A11:2012   Household and similar electrical appliances - Safety --    NC    5 239 MMFPS
                                   Part 2-48: Particular requirements for commercial electric
                                   grillers and toasters
1111 EN 60335-2-49:2003/A11:2012   Household and similar electrical appliances - Safety --    NC    6 239 MMFPS
                                   Part 2-49: Particular requirements for commercial electric
                                   appliances for keeping food and crockery warm

1112 EN ISO 11148-1:2011           Hand-held non-electric power tools - Safety requirements NC      23 255 MMFPS
                                   - Part 1: Assembly power tools for non-threaded
                                   mechanical fasteners (ISO 11148-1:2011)

1113 EN ISO 11148-10:2011          Hand-held non-electric power tools - Safety requirements NC      22 255 MMFPS
                                   - Part 10: Compression power tools (ISO 11148-10:2011)

1114 EN ISO 11148-11:2011          Hand-held non-electric power tools - Safety requirements NC      22 255 MMFPS
                                   - Part 11: Nibblers and shears (ISO 11148-11:2011)

1115 EN ISO 11148-2:2011           Hand-held non-electric power tools - Safety requirements NC      22 255 MMFPS
                                   - Part 2: Cutting-off and crimping power tools (ISO/FDIS
                                   11148-2:2011)
1116 EN ISO 11148-5:2011           Hand-held non-electric power tools - Safety requirements NC      28 255 MMFPS
                                   - Part 5: Rotary percussive drills (ISO 11148-5:2011)

1117 EN ISO 11148-7:2012           Hand-held non-electric power tools - Safety requirements NC      40 255 MMFPS
                                   - Part 7: Grinders (ISO 11148-7:2012)
1118 EN ISO 11148-8:2011           Hand-held non-electric power tools - Safety requirements NC      25 255 MMFPS
                                   - Part 8: Sanders and polishers (ISO 11148-8:2011)

1119 EN ISO 11148-9:2011           Hand-held non-electric power tools - Safety requirements NC      25 255 MMFPS
                                   - Part 9: Die grinders (ISO 11148-9:2011)

1120 EN 50580:2012                 Safety of hand-held electric motor operated tools --        NC   7 255 MMFPS
                                   Particular requirements for spray guns
1121 EN 60745-2-22:2011            Hand-held motor-operated electric tools - Safety -- Part 2- NC   23 255 MMFPS
                                   22: Particular requirements for cut-off machines

1122 EN 60745-2-4:2009/A11:2011    Hand-held motor-operated electric tools - Safety -- Part 2- NC   2 255 MMFPS
                                   4: Particular requirements for sanders and polishers
                                   other than disk type
1123 EN 61029-2-3:2011             Safety of transportable motor-operated electric tools --   NC    20 255 MMFPS
                                   Part 2-3: Particular requirements for planers and
                                   thicknessers
1124 EN 61029-2-5:2011             Safety of transportable motor-operated electric tools --   NC    12 255 MMFPS
                                   Part 2-5: Particular requirements for band saws

1125 EN ISO 3745:2012              Acoustics - Determination of sound power levels and        NC    67 274 MMFPS
                                   sound energy levels of noise sources using sound
                                   pressure - Precision methods for anechoic rooms and
                                   hemi-anechoic rooms (ISO 3745:2012)
1126 EN ISO 8253-3:2012            Acoustics - Audiometric test methods - Part 3: Speech      NC    42 274 MMFPS
                                   audiometry (ISO 8253-3:2012)
1127 EN ISO 20643:2008/A1:2012     Mechanical vibration - Hand-held and hand-guided           NC    7 274 MMFPS
                                   machinery - Principles for evaluation of vibration
                                   emission - Amendment 1: Accelerometer positions (ISO
                                   20643:2005/Amd 1:2012)
1128 EN 15967:2011                 Determination of maximum explosion pressure and the        NC    28 358 MMFPS
                                   maximum rate of pressure rise of gases and vapours
1129 EN ISO/IEC 80079-34:2011   Explosive atmospheres - Part 34: Application of quality      NC   41 358 MMFPS
                                systems for equipment manufacture (ISO/IEC 80079-
                                34:2011)
1130 EN 1501-1:2011             Refuse collection vehicles - General requirements and        NC   43 360 MMFPS
                                safety requirements - Part 1: Rear loaded refuse
                                collection vehicles
1131 EN 1501-5:2011             Refuse collection vehicles - General requirements and        NC   55 360 MMFPS
                                safety requirements - Part 5: Lifting devices for refuse
                                collection vehicles
1132 EN 806-5:2012              Specifications for installations inside buildings conveying NC    22   52 MMP
                                water for human consumption - Part 5: Operation and
                                maintenance
1133 EN 890:2012                Chemicals used for treatment of water intended for           NC   29   52 MMP
                                human consumption - Iron (III) sulfate solution
1134 EN ISO 7887:2011           Water quality - Examination and determination of colour      NC   16   52 MMP
                                (ISO 7887:2011)
1135 EN ISO 8692:2012           Water quality - Fresh water algal growth inhibition test     NC   25   52 MMP
                                with unicellular green algae (ISO 8692:2012)
1136 EN ISO 10870:2012          Water quality - Guidelines for the selection of sampling     NC   31   52 MMP
                                methods and devices for benthic macroinvertebrates in
                                fresh waters (ISO 10870:2012)

1137 EN ISO 12846:2012          Water quality - Determination of mercury - Method using      NC   20   52 MMP
                                atomic absorption spectrometry (AAS) with and without
                                enrichment (ISO 12846:2012)
1138 EN 13618:2011              Flexible hose assemblies in drinking water installations -   NC   14   52 MMP
                                Functional requirements and test methods

1139 EN 13752:2012              Chemicals used for treatment of water intended for           NC   13   52 MMP
                                human consumption - Manganese dioxide
1140 EN ISO 14403-1:2012        Water quality - Determination of total cyanide and free      NC   16   52 MMP
                                cyanide using flow analysis (FIA and CFA) - Part 1:
                                Method using flow injection analysis (FIA) (ISO 14403-
                                1:2012)
1141 EN ISO 14403-2:2012        Water quality - Determination of total cyanide and free NC        21   52 MMP
                                cyanide using flow analysis (FIA and CFA) - Part 2:
                                Method using continuous flow analysis (CFA) (ISO 14403-
                                2:2012)
1142 EN 15972:2011              Water quality - Guidance on quantitative and qualitative     NC   31   52 MMP
                                investigations of marine phytoplankton
1143 EN 16003:2011              Chemicals used for treatment of water intended for           NC   7    52 MMP
                                human consumption - Calcium magnesium carbonate

1144 EN 16004:2011              Chemicals used for treatment of water intended for           NC   6    52 MMP
                                human consumption - Magnesium oxide
1145 EN 16037:2012              Chemicals used for treatment of water intended for           NC   19   52 MMP
                                human consumption - Sodium hydrogen sulfate
1146 EN 16038:2012              Chemicals used for treatment of water for swimming           NC   6    52 MMP
                                pools - Sodium hydrogen sulfate
1147 EN 16039:2011              Water quality - Guidance standard on assessing the           NC   40   52 MMP
                                hydromorphological features of lakes
1148 EN 16056:2012              Influence of metallic materials on water intended for        NC   6    52 MMP
                                human consumption - Method to evaluate the passive
                                behaviour of stainless steels
1149 EN 16057:2012              Influence of metallic materials on water intended for        NC   7    52 MMP
                                human consumption - Determination of residual surface
                                lead (Pb) - Extraction method
1150 EN 16058:2012              Influence of metallic materials on water intended for  NC         11   52 MMP
                                human consumption - Dynamic rig test for assessment of
                                surface coatings with nickel layers - Long-term test
                                method
1151 EN 16150:2012         Water quality - Guidance on pro-rata Multi-Habitat           NC   13   52 MMP
                           sampling of benthic macro-invertebrates from wadeable
                           rivers
1152 EN 16161:2012         Water quality - Guidance on the use of in vivo absorption NC      21   52 MMP
                           techniques for the estimation of chlorophyll-a
                           concentration in marine and fresh water samples

1153 EN ISO 16265:2012     Water quality - Determination of the methylene blue          NC   13   52 MMP
                           active substances (MBAS) index - Method using
                           continuous flow analysis (CFA) (ISO 16265:2009)
1154 EN ISO 18857-2:2011   Water quality - Determination of selected alkylphenols - NC       18   52 MMP
                           Part 2: Gas chromatographic-mass spectrometric
                           determination of alkylphenols, their ethoxylates and
                           bisphenol A in non-filtered samples following solid-phase
                           extraction and derivatisation (ISO 18857-2:2009)


1155 EN 482:2012           Workplace exposure - General requirements for the            NC   20   53 MMP
                           performance of procedures for the measurement of
                           chemical agents
1156 EN 1540:2011          Workplace exposure - Terminology                             NC   19   53 MMP
1157 EN ISO 13138:2012     Air quality - Sampling conventions for airborne particle     NC   20   53 MMP
                           deposition in the human respiratory system (ISO
                           13138:2012)
1158 EN 14211:2012         Ambient air - Standard method for the measurement of         NC   90   53 MMP
                           the concentration of nitrogen dioxide and nitrogen
                           monoxide by chemiluminescence
1159 EN 14212:2012         Ambient air - Standard method for the measurement of         NC   90   53 MMP
                           the concentration of sulphur dioxide by ultraviolet
                           fluorescence
1160 EN 14625:2012         Ambient air - Standard method for the measurement of         NC   83   53 MMP
                           the concentration of ozone by ultraviolet photometry

1161 EN 14626:2012         Ambient air - Standard method for the measurement of         NC   73   53 MMP
                           the concentration of carbon monoxide by non-dispersive
                           infrared spectroscopy
1162 EN 13071-3:2011       Stationary waste containers up to 5 000 l, top lifted and    NC   4 360 MMP
                           bottom emptied - Part 3: Recommended lifting
                           connections
1163 EN 14961-6:2012       Solid biofuels - Fuel specifications and classes - Part 6:   NC   12 360 MMP
                           Non-woody pellets for non-industrial use
1164 EN 15150:2011         Solid biofuels - Determination of particle density           NC   10 360 MMP
1165 EN 15234-2:2012       Solid biofuels - Fuel quality assurance - Part 2: Wood       NC   11 360 MMP
                           pellets for non-industrial use
1166 EN 15234-3:2012       Solid biofuels - Fuel quality assurance - Part 3: Wood       NC   10 360 MMP
                           briquettes for non-industrial use
1167 EN 15234-4:2012       Solid biofuels - Fuel quality assurance - Part 4: Wood       NC   10 360 MMP
                           chips for non-industrial use
1168 EN 15234-5:2012       Solid biofuels - Fuel quality assurance - Part 5: Firewood   NC   10 360 MMP
                           for non-industrial use
1169 EN 15234-6:2012       Solid biofuels - Fuel quality assurance - Part 6: Non-       NC   11 360 MMP
                           woody pellets for non-industrial use
1170 EN 15359:2011         Solid recovered fuels - Specifications and classes           NC   19 360 MMP
1171 EN 15411:2011         Solid recovered fuels - Methods for the determination of     NC   17 360 MMP
                           the content of trace elements (As, Ba, Be, Cd, Co, Cr,
                           Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)

1172 EN 15413:2011         Solid recovered fuels - Methods for the preparation of the NC     28 360 MMP
                           test sample from the laboratory sample
1173 EN 15415-1:2011       Solid recovered fuels - Determination of particle size     NC     9 360 MMP
                           distribution - Part 1: Screen method for small dimension
                           particles
1174 EN 15415-2:2012               Solid recovered fuels - Determination of particle size         NC   10 360 MMP
                                   distribution - Part 2: Maximum projected length method
                                   (manual) for large dimension particles
1175 EN 15415-3:2012               Solid recovered fuels - Determination of particle size         NC   11 360 MMP
                                   distribution - Part 3: Method by image analysis for large
                                   dimension particles
1176 EN 15590:2011                 Solid recovered fuels - Determination of the current rate      NC   9 360 MMP
                                   of aerobic microbial activity using the real dynamic
                                   respiration index
1177 EN 15875:2011                 Characterization of waste - Static test for determination of NC     22 360 MMP
                                   acid potential and neutralisation potential of sulfidic waste

1178 EN 15875:2011/AC:2012         Characterization of waste - Static test for determination of ER     1 360 MMP
                                   acid potential and neutralisation potential of sulfidic waste

1179 EN 16126:2012                 Solid biofuels - Determination of particle size distribution   NC   8 360 MMP
                                   of disintegrated pellets
1180 EN 16127:2012                 Solid biofuels - Determination of length and diameter of       NC   5 360 MMP
                                   pellets
1181 EN 16192:2011                 Characterization of waste - Analysis of eluates                NC   25 360 MMP
1182 EN 16194:2012                 Mobile non-sewer-connected toilet cabins - Requirements        NC    8 360 MMP
                                   of services and products relating to the deployment of
                                   cabins and sanitary products
1183 EN ISO 23161:2011             Soil quality - Determination of selected organotin             NC   31 360 MMP
                                   compounds - Gas-chromatographic method (ISO
                                   23161:2009)
1184 EN 60601-1:2006/A11:2011      Medical electrical equipment -- Part 1: General         NC          2   22 MS
                                   requirements for basic safety and essential performance

1185 EN 60601-2-19:2009/A11:2011   Medical electrical equipment -- Part 2-19: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of infant incubators
1186 EN 60601-2-2:2009/A11:2011    Medical electrical equipment -- Part 2-2: Particular           NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of high frequency surgical equipment and
                                   high frequency surgical accessories
1187 EN 60601-2-20:2009/A11:2011   Medical electrical equipment -- Part 2-20: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of infant transport incubators
1188 EN 60601-2-21:2009/A11:2011   Medical electrical equipment -- Part 2-21: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of infant radiant warmers
1189 EN 60601-2-29:2008/A11:2011   Medical electrical equipment -- Part 2-29: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of radiotherapy simulators
1190 EN 60601-2-31:2008/A1:2011    Medical electrical equipment -- Part 2-31: Particular    NC         7   22 MS
                                   requirements for the basic safety and essential
                                   performance of external cardiac pacemakers with internal
                                   power source
1191 EN 60601-2-33:2010/A11:2011   Medical electrical equipment -- Part 2-33: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of magnetic resonance equipment for
                                   medical diagnosis
1192 EN 60601-2-37:2008/A11:2011   Medical electrical equipment -- Part 2-37: Particular          NC   2   22 MS
                                   requirements for the basic safety and essential
                                   performance of ultrasonic medical diagnostic and
                                   monitoring equipment
1193 EN 60601-2-39:2008/A11:2011   Medical electrical equipment -- Part 2-39: Particular   NC          2   22 MS
                                   requirements for basic safety and essential performance
                                   of peritoneal dialysis equipment
1194 EN 60601-2-4:2011             Medical electrical equipment -- Part 2-4: Particular          NC   89    22 MS
                                   requirements for the basic safety and essential
                                   performance of cardiac defibrillators
1195 EN 60601-2-41:2009/A11:2011   Medical electrical equipment -- Part 2-41: Particular   NC          2    22 MS
                                   requirements for basic safety and essential performance
                                   of surgical luminaires and luminaires for diagnosis

1196 EN 60601-2-44:2009/A11:2011   Medical electrical equipment -- Part 2-44: Particular         NC    2    22 MS
                                   requirements for the basic safety and essential
                                   performance of X-ray equipment for computed
                                   tomography
1197 EN 60601-2-46:2011            Medical electrical equipment -- Part 2-46: Particular         NC   21    22 MS
                                   requirements for the basic safety and essential
                                   performance of operating tables
1198 EN 60601-2-50:2009/A11:2011   Medical electrical equipment -- Part 2-50: Particular         NC    2    22 MS
                                   requirements for the basic safety and essential
                                   performance of infant phototherapy equipment
1199 EN 60731:2012                 Medical electrical equipment - Dosimeters with ionization NC       114   22 MS
                                   chambers as used in radiotherapy
1200 EN 61217:2012                 Radiotherapy equipment - Coordinates, movements and NC             40    22 MS
                                   scales
1201 EN 80601-2-35:2009/A11:2011   Medical electrical equipment -- Part 2-35: Particular     NC        2    22 MS
                                   requirements for the basic safety and essential
                                   performance of heating devices using blankets, pads and
                                   mattresses and intended for heating in medical use

1202 EN 80601-2-58:2009/A11:2011   Medical electrical equipment -- Part 2-58: Particular         NC    2    22 MS
                                   requirements for the basic safety and essential
                                   performance of lens removal devices and vitrectomy
                                   devices for ophthalmic surgery
1203 EN 60118-13:2011              Electroacoustics - Hearing aids -- Part 13:                   NC   22    26 MS
                                   Electromagnetic compatibility (EMC)
1204 EN ISO 12870:2012             Ophthalmic optics - Spectacle frames - Requirements           NC   32 230 MS
                                   and test methods (ISO 12870:2012)
1205 EN 50527-2-1:2011             Procedure for the assessment of the exposure to               NC   70 279 MS
                                   electromagnetic fields of workers bearing active
                                   implantable medical devices -- Part 2-1: Specific
                                   assessment for workers with cardiac pacemakers
1206 EN 13727:2012                 Chemical disinfectants and antiseptics - Quantitative         NC   43 298 MS
                                   suspension test for the evaluation of bactericidal activity
                                   in the medical area - Test method and requirements
                                   (phase 2, step 1)
1207 EN ISO 1135-4:2011            Transfusion equipment for medical use - Part 4:               NC   16 377 MS
                                   Transfusion sets for single use (ISO 1135-4:2010)
1208 EN ISO 1135-4:2012            Transfusion equipment for medical use - Part 4:               NC   15 377 MS
                                   Transfusion sets for single use (ISO 1135-4:2012)
1209 EN ISO 1797-1:2011            Dentistry - Shanks for rotary instruments - Part 1: Shanks    NC    5 377 MS
                                   made of metals (ISO 1797-1:2011)
1210 EN 1865-3:2012                Patient handling equipment used in road ambulances -          NC   11 377 MS
                                   Part 3: Heavy duty stretcher
1211 EN 1865-4:2012                Patient handling equipment used in road ambulances -          NC    5 377 MS
                                   Part 4: Foldable patient transfer chair
1212 EN 1865-5:2012                Patient handling equipment used in road ambulances -          NC    9 377 MS
                                   Part 5: Stretcher support
1213 EN ISO 3630-5:2011            Dentistry - Endodontic instruments - Part 5: Shaping and      NC    8 377 MS
                                   cleaning instruments (ISO 3630-5:2011)
1214 EN ISO 5359:2008/A1:2011      Low-pressure hose assemblies for use with medical             NC    4 377 MS
                                   gases - Amendment 1 (ISO 5359:2008/Amd 1:2011)

1215 EN ISO 5360:2012              Anaesthetic vaporizers - Agent-specific filling systems       NC   14 377 MS
                                   (ISO 5360:2012)
1216 EN ISO 5832-2:2012           Implants for surgery - Metallic materials - Part 2:       NC       6 377 MS
                                  Unalloyed titanium (ISO 5832-2:1999)
1217 EN ISO 6360-2:2004/A1:2011   Dentistry - Number coding system for rotary instruments - NC       8 377 MS
                                  Part 2: Shapes - Amendment 1 (ISO 6360-2:2004/Amd
                                  1:2011)
1218 EN ISO 6876:2012             Dentistry - Root canal sealing materials (ISO 6876:2012) NC        11 377 MS

1219 EN ISO 7494-1:2011           Dentistry - Dental units - Part 1: General requirements       NC   8 377 MS
                                  and test methods (ISO 7494-1:2011)
1220 EN ISO 8359:2009/A1:2012     Oxygen concentrators for medical use - Safety                 NC   5 377 MS
                                  requirements - Amendment 1 (ISO 8359:1996/Amd
                                  1:2012)
1221 EN ISO 8362-4:2011           Injection containers and accessories - Part 4: Injection      NC   7 377 MS
                                  vials made of moulded glass (ISO/FDIS 8362-4:2011)

1222 EN ISO 8536-1:2011           Infusion equipment for medical use - Part 1: Infusion         NC   7 377 MS
                                  glass bottles (ISO/FDIS 8536-1:2011)
1223 EN ISO 8536-5:2011           Infusion equipment for medical use - Part 5: Burette          NC   6 377 MS
                                  infusion sets for single use, gravity feed (ISO 8536-
                                  5:2004)
1224 EN ISO 9693-1:2012           Dentistry - Compatibility testing - Part 1: Metal-ceramic NC       6 377 MS
                                  systems (ISO 9693-1:2012)
1225 EN ISO 10271:2011            Dentistry - Corrosion test methods for metallic materials NC       28 377 MS
                                  (ISO 10271:2011)
1226 EN ISO 10993-12:2012         Biological evaluation of medical devices - Part 12:       NC       31 377 MS
                                  Sample preparation and reference materials (ISO 10993-
                                  12:2012)
1227 EN ISO 11137-2:2012          Sterilization of health care products - Radiation - Part 2:   NC   85 377 MS
                                  Establishing the sterilization dose (ISO 11137-2:2012)

1228 EN ISO 11608-1:2012          Needle-based injection systems for medical use -              NC   43 377 MS
                                  Requirements and test methods - Part 1: Needle-based
                                  injection systems (ISO 11608-1:2012)
1229 EN ISO 11608-2:2012          Needle-based injection systems for medical use -              NC   17 377 MS
                                  Requirements and test methods - Part 2: Needles (ISO
                                  11608-2:2012)
1230 EN 12182:2012                Assistive products for persons with disability - General NC        66 377 MS
                                  requirements and test methods
1231 EN ISO 13017:2012            Dentistry - Magnetic attachments (ISO 13017:2012)        NC        10 377 MS
1232 EN ISO 13485:2012            Medical devices - Quality management systems -           NC        89 377 MS
                                  Requirements for regulatory purposes (ISO 13485:2003)

1233 EN ISO 13485:2012/AC:2012    Medical devices - Quality management systems -                ER   2 377 MS
                                  Requirements for regulatory purposes - Technical
                                  Corrigendum 1 (ISO 13485:2003+Cor 1:2009)
1234 EN ISO 13504:2012            Dentistry - General requirements for instruments and     NC        15 377 MS
                                  related accessories used in dental implant placement and
                                  treatment (ISO 13504:2012)
1235 EN ISO 14155:2011            Clinical investigation of medical devices for human           NC   65 377 MS
                                  subjects - Good clinical practice (ISO 14155:2011)
1236 EN ISO 14602:2011            Non-active surgical implants - Implants for                   NC   14 377 MS
                                  osteosynthesis - Particular requirements (ISO
                                  14602:2010)
1237 EN ISO 15001:2011            Anaesthetic and respiratory equipment - Compatibility         NC   49 377 MS
                                  with oxygen (ISO 15001:2010)
1238 EN ISO 15223-1:2012          Medical devices - Symbols to be used with medical             NC   21 377 MS
                                  device labels, labelling and information to be supplied -
                                  Part 1: General requirements (ISO 15223-1:2012)

1239 EN ISO 15747:2011            Plastic containers for intravenous injections (ISO            NC   15 377 MS
                                  15747:2010)
1240 EN ISO 20126:2012           Dentistry - Manual toothbrushes - General requirements NC           9 377 MS
                                 and test methods (ISO 20126:2012)
1241 EN ISO 21672-1:2012         Dentistry - Periodontal probes - Part 1: General              NC    7 377 MS
                                 requirements (ISO 21672-1:2012)
1242 EN ISO 23640:2011           In vitro diagnostic medical devices - Evaluation of stability NC   11 377 MS
                                 of in vitro diagnostic reagents (ISO 23640:2011)

1243 EN ISO 24234:2004/A1:2011   Dentistry - Mercury and alloys for dental amalgam -         NC      5 377 MS
                                 Amendment 1: Requirements for marking and
                                 manufacturer's instructions concerning mercury (ISO
                                 24234:2004/A1:2011)
1244 EN ISO 25539-3:2011         Cardiovascular implants - Endovascular devices - Part 3: NC        96 377 MS
                                 Vena cava filters (ISO 25539-3:2011)
1245 EN ISO 80601-2-55:2011      Medical electrical equipment - Part 2-55: Particular     NC        63 377 MS
                                 requirements for the basic safety and essential
                                 performance of respiratory gas monitors (ISO 80601-2-
                                 55:2011)
1246 EN ISO 81060-1:2012         Non-invasive sphygmomanometers - Part 1:                    NC     47 377 MS
                                 Requirements and test methods for non-automated
                                 measurement type (ISO 81060-1:2007)
1247 EN 50128:2011               Railway applications - Communication, signalling and        NC     137    4 MTI
                                 processing systems - Software for railway control and
                                 protection systems
1248 EN 50388:2012               Railway Applications - Power supply and rolling stock -     NC     44     4 MTI
                                 Technical criteria for the coordination between power
                                 supply (substation) and rolling stock to achieve
                                 interoperability
1249 EN 50388:2012/AC:2012                                                                   ER      1     4 MTI
1250 EN 50533:2011               Railway applications - Three-phase train line voltage       NC     19     4 MTI
                                 characteristics
1251 EN 62290-2:2011             Railway applications - Urban guided transport               NC     68     4 MTI
                                 management and command/control systems -- Part 2:
                                 Functional requirements specification
1252 EN 62520:2011               Railway applications - Electric traction - Short-primary    NC     28     4 MTI
                                 type linear induction motors (LIM) fed by power
                                 converters
1253 EN 2149:1996                Aerospace series - Rivets, solid, universal head, in        NC      6    72 MTI
                                 aluminium alloy 5056A, anodized or chromated, inch
                                 based series
1254 EN 2213:2012                Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air         NC      3    72 MTI
                                 melted - Hardened and tempered - Bars - De ? 16 mm -
                                 980 MPa ? Rm ? 1 180 MPa
1255 EN 2234:2012                Aerospace series - Cable, electrical, fire resistant - NC           7    72 MTI
                                 Technical specification
1256 EN 2245:2012                Aerospace series - Pipelines for liquids and gases -   NC           3    72 MTI
                                 Definitions
1257 EN 2252:2012                Aerospace series - Steel FE-PL1505 (15CrMoV6) - 1 080 NC            3    72 MTI
                                 MPa ? Rm ? 1 250 MPa - Forgings - De ? 100 mm

1258 EN 2311:2012                Aerospace series - Bushes with self-lubricating liner -     NC     13    72 MTI
                                 Technical specification
1259 EN 2835:2012                Aerospace series - Chloroprene rubber (CR) - Heat           NC      3    72 MTI
                                 resistance - Hardness 40 IRHD
1260 EN 2836:2012                Aerospace series - Chloroprene rubber (CR) - Heat           NC      3    72 MTI
                                 resistance - Hardness 50 IRHD
1261 EN 2837:2012                Aerospace series - Chloroprene rubber (CR) - Heat           NC      3    72 MTI
                                 resistance - Hardness 60 IRHD
1262 EN 3120:2012                Aerospace series - Titanium alloy TI-P64003 - Cold          NC      4    72 MTI
                                 worked and stress relieved - Seamless tube for pressure
                                 systems - 4 mm ? D ? 51 mm - 690 MPa ? Rm ? 1 030
                                 MPa
1263 EN 3182:2012       Aerospace series - Ball bearings, rigid in corrosion        NC      4    72 MTI
                        resisting steel cadmium plated, for control cable pulleys -
                        Dimensions and loads
1264 EN 3278:2012       Aerospace series - Sleeves, tubular, protruding head, in       NC   3    72 MTI
                        corrosion resisting steel, passivated (0,25 mm wall
                        thickness)
1265 EN 3312:2012       Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - NC         52   72 MTI
                        Forgings De ? 150 mm
1266 EN 3355:2012       Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - NC        3    72 MTI
                        Annealed - Extruded section - De ? 150 mm - 900 MPa ?
                        Rm ? 1 160 MPa
1267 EN 3382:2012       Aerospace series - Rings retaining, internal, axial            NC   4    72 MTI
                        mounting, steel, phosphated
1268 EN 3383:2012       Aerospace series - Rings retaining, internal, axial            NC   4    72 MTI
                        mounting, steel, vacuum cadmium plated
1269 EN 3384:2012       Aerospace series - Rings retaining, external, axial            NC   4    72 MTI
                        mounting, steel, phosphated
1270 EN 3385:2012       Aerospace series - Rings retaining, external, axial            NC   4    72 MTI
                        mounting, steel, vacuum cadmium plated
1271 EN 3386:2012       Aerospace series - Rings retaining, radial mounting,           NC   3    72 MTI
                        steel, phosphated
1272 EN 3417:2012       Aerospace series - Rivets, solid, universal head, in nickel    NC   3    72 MTI
                        base alloy NI-P11, metric series
1273 EN 3706:2012       Aerospace series - Headless threaded plugs, cross              NC   2    72 MTI
                        recess, in aluminium alloy 5086
1274 EN 3707:2012       Aerospace series - Headless threaded plugs - Installation      NC   3    72 MTI
                        holes
1275 EN 3718:2012       Aerospace series - Test method for metallic materials -        NC   9    72 MTI
                        Ultrasonic inspection of tubes
1276 EN 3768:2012       Aerospace series - Nuts, anchor, self-locking, one lug,        NC   4    72 MTI
                        fixed, reduced series, with counterbore, in heat resisting
                        steel, MoS2 lubricated - Classification: 1 100 MPa (at
                        ambient temperature)/315 °C
1277 EN 4159:2011       Aerospace series - Paints and varnishes - Determination        NC   8    72 MTI
                        of resistance to microbial growth
1278 EN 4171:2011       Aerospace series - Paints and varnishes - Test method          NC   3    72 MTI
                        for determination of phosphoric acid index
1279 EN 4195:2011       Aerospace series - Paints and varnishes - Test method          NC   6    72 MTI
                        for determination of chromate leaching
1280 EN 4443:2012       Aerospace series - Nuts, elliptical clinch, self-locking, MJ   NC   4    72 MTI
                        threads, in heat resisting steel FE-PA2601 (A286), MoS2
                        coated, Classification: 900 MPa (at ambient
                        temperature)/ 425 °C
1281 EN 4540:2011       Aerospace series - Bearings, spherical plain, in corrosion NC       19   72 MTI
                        resisting steel with self-lubricating liner elevated load
                        under low oscillations - Technical specification

1282 EN 4677-001:2012   Aerospace series - Welded and brazed assemblies for            NC   26   72 MTI
                        aerospace construction - Joints of metallic materials by
                        electron beam welding - Part 001: Quality of welded
                        assemblies
1283 EN 4687:2012       Aerospace series - Paints and varnishes - Chromate free NC          11   72 MTI
                        non corrosion inhibiting two components cold curing
                        primer for military application

1284 EN 4688:2012       Aerospace series - Paints and varnishes - Corrosion            NC   11   72 MTI
                        inhibiting two components cold curing primer for military
                        application
1285 EN 4689:2012       Aerospace series - Paints and varnishes - Two                  NC   16   72 MTI
                        components cold curing polyurethane finish - High
                        flexibility and chemical agent resistance for military
                        application
1286 EN 4697:2012              Aerospace series - General and installation requirements NC      8   72 MTI
                               for passenger seat fittings
1287 EN 4704:2012              Aerospace series - Tartaric-Sulphuric-Acid anodizing of NC       8   72 MTI
                               aluminium and aluminium wrought alloys for corrosion
                               protection and paint pre-treatment (TSA)

1288 EN 16082:2011             Airport and aviation security services                      NC   21 72 MTI
1289 EN 61162-450:2011         Maritime navigation and radiocommunication equipment        NC   61 143 MTI
                               and systems - Digital interfaces -- Part 450: Multiple
                               talkers and multiple listeners - Ethernet interconnection

1290 EN 13103:2009+A2:2012     Railway applications - Wheelsets and bogies - Non-        NC     25 146 MTI
                               powered axles - Design method
1291 EN 13145:2001+A1:2011     Railway applications - Track - Wood sleepers and          NC     12 146 MTI
                               bearers
1292 EN 13146-9:2009+A1:2011   Railway applications - Track - Test methods for fastening NC     19 146 MTI
                               systems - Part 9: Determination of stiffness

1293 EN 13146-1:2012           Railway applications - Track - Test methods for fastening NC     7 146 MTI
                               systems - Part 1: Determination of longitudinal rail
                               restraint
1294 EN 13146-2:2012           Railway applications - Track - Test methods for fastening NC     5 146 MTI
                               systems - Part 2: Determination of torsional resistance

1295 EN 13146-3:2012           Railway applications - Track - Test methods for fastening NC     7 146 MTI
                               systems - Part 3: Determination of attenuation of impact
                               loads
1296 EN 13146-4:2012           Railway applications - Track - Test methods for fastening NC     11 146 MTI
                               systems - Part 4: Effect of repeated loading

1297 EN 13146-5:2012           Railway applications - Track - Test methods for fastening NC     5 146 MTI
                               systems - Part 5: Determination of electrical resistance

1298 EN 13146-6:2012           Railway applications - Track - Test methods for fastening NC     3 146 MTI
                               systems - Part 6: Effect of severe environmental
                               conditions
1299 EN 13146-7:2012           Railway applications - Track - Test methods for fastening NC     5 146 MTI
                               systems - Part 7: Determination of clamping force

1300 EN 13146-8:2012           Railway applications - Track - Test methods for fastening NC     5 146 MTI
                               systems - Part 8: In service testing
1301 EN 13231-3:2012           Railway applications - Track - Acceptance of works - Part NC     27 146 MTI
                               3: Acceptance of reprofiling rails in track

1302 EN 13232-2:2003+A1:2011   Railway applications - Track - Switches and crossings -     NC   11 146 MTI
                               Part 2: Requirements for geometric design

1303 EN 13232-3:2003+A1:2011   Railway applications - Track - Switches and crossings -     NC   11 146 MTI
                               Part 3: Requirements for wheel/rail interaction

1304 EN 13232-4:2005+A1:2011   Railway applications - Track - Switches and crossings -     NC   14 146 MTI
                               Part 4: Actuation, locking and detection
1305 EN 13232-5:2005+A1:2011   Railway applications - Track - Switches and crossings -     NC   15 146 MTI
                               Part 5: Switches
1306 EN 13232-6:2005+A1:2011   Railway applications - Track - Switches and crossings -     NC   16 146 MTI
                               Part 6: Fixed common and obtuse crossings

1307 EN 13232-7:2006+A1:2011   Railway applications - Track - Switches and crossings -     NC   29 146 MTI
                               Part 7: Crossings with moveable parts
1308 EN 13232-8:2007+A1:2011   Railway applications - Track - Switches and crossings -     NC   15 146 MTI
                               Part 8: Expansion devices
1309 EN 13232-9:2006+A1:2011   Railway applications - Track - Switches and crossings -      NC   33 146 MTI
                               Part 9: Layouts
1310 EN 13272:2012             Railway applications - Electrical lighting for rolling stock NC   19 146 MTI
                               in public transport systems
1311 EN 13481-2:2012           Railway applications - Track - Performance requirements NC        14 146 MTI
                               for fastening systems - Part 2: Fastening systems for
                               concrete sleepers
1312 EN 13481-3:2012           Railway applications - Track - Performance requirements NC        11 146 MTI
                               for fastening systems - Part 3: Fastening systems for
                               wood sleepers
1313 EN 13481-5:2012           Railway applications - Track - Performance requirements NC        14 146 MTI
                               for fastening systems - Part 5: Fastening systems for
                               slab track with rail on the surface or rail embedded in a
                               channel
1314 EN 13481-7:2012           Railway applications - Track - Performance requirements NC        13 146 MTI
                               for fastening systems - Part 7: Special fastening systems
                               for switches and crossings and check rails

1315 EN 13481-1:2012           Railway applications - Track - Performance requirements NC        6 146 MTI
                               for fastening systems - Part 1: Definitions

1316 EN 13481-4:2012           Railway applications - Track - Performance requirements NC        11 146 MTI
                               for fastening systems - Part 4: Fastening systems for
                               steel sleepers
1317 EN 13848-4:2011           Railway applications - Track - Track geometry quality -     NC    19 146 MTI
                               Part 4: Measuring systems - Manual and lightweight
                               devices
1318 EN 14033-2:2008+A1:2011   Railway applications - Track - Railbound construction and NC      47 146 MTI
                               maintenance machines - Part 2: Technical requirements
                               for working
1319 EN 15746-1:2010+A1:2011   Railway applications - Track - Road-rail machines and       NC    61 146 MTI
                               associated equipment - Part 1: Technical requirements
                               for running and working
1320 EN 15877-1:2012           Railway applications - Marking on railway vehicles - Part   NC    39 146 MTI
                               1: Freight wagons
1321 EN 16028:2012             Railway applications - Wheel/rail friction management -     NC    37 146 MTI
                               Lubricants for trainborne and trackside applications

1322 EN ISO 11591:2011         Small craft, engine-driven - Field of vision from helm      NC    11 199 MTI
                               position (ISO 11591:2011)
1323 EN ISO 12215-9:2012       Small craft - Hull construction and scantlings - Part 9:    NC    75 199 MTI
                               Sailing craft appendages (ISO 12215-9:2012)
1324 EN 15609:2012             LPG equipment and accessories - LPG propulsion              NC    32 231 MTI
                               systems for boats, yachts and other craft
1325 EN 2240-083:2011          Aerospace series - Lamps, incandescent - Part 083:          NC    2 303 MTI
                               Lamp, code 7152 - Product standard
1326 EN 2240-084:2011          Aerospace series - Lamps, incandescent - Part 084:          NC    2 303 MTI
                               Lamp, code 7153 - Product standard
1327 EN 2240-085:2011          Aerospace series - Lamps, incandescent - Part 085:          NC    2 303 MTI
                               Lamp, code 7265 - Product standard
1328 EN 2240-086:2011          Aerospace series - Lamps, incandescent - Part 086:          NC    2 303 MTI
                               Lamp, code 7333 - Product standard
1329 EN 2240-087:2011          Aerospace series - Lamps, incandescent - Part 087:          NC    2 303 MTI
                               Lamp, code 7341 - Product standard
1330 EN 2240-088:2011          Aerospace series - Lamps, incandescent - Part 088:          NC    2 303 MTI
                               Lamp, code A7512-12 - Product standard
1331 EN 2240-089:2011          Aerospace series - Lamps, incandescent - Part 089:          NC    2 303 MTI
                               Lamp, code A7512-24 - Product standard
1332 EN 2240-090:2011          Aerospace series - Lamps, incandescent - Part 090:          NC    2 303 MTI
                               Lamp, code 7683 - Product standard
1333 EN 2240-091:2011          Aerospace series - Lamps, incandescent - Part 091:          NC    2 303 MTI
                               Lamp, code 7714 - Product standard
1334 EN 2240-092:2011   Aerospace series - Lamps, incandescent - Part 092:           NC   2 303 MTI
                        Lamp, code 7715 - Product standard
1335 EN 2240-093:2011   Aerospace series - Lamps, incandescent - Part 093:           NC   2 303 MTI
                        Lamp, code 7839 - Product standard
1336 EN 2240-094:2011   Aerospace series - Lamps, incandescent - Part 094:           NC   2 303 MTI
                        Lamp, code 8022 - Product standard
1337 EN 2240-095:2011   Aerospace series - Lamps, incandescent - Part 095:           NC   2 303 MTI
                        Lamp, code 8552 - Product standard
1338 EN 2240-096:2011   Aerospace series - Lamps, incandescent - Part 096:           NC   2 303 MTI
                        Lamp, code 72301-6 - Product standard
1339 EN 2240-097:2011   Aerospace series - Lamps, incandescent - Part 097:           NC   2 303 MTI
                        Lamp, code 72601-12 - Product standard
1340 EN 2240-098:2011   Aerospace series - Lamps, incandescent - Part 098:           NC   2 303 MTI
                        Lamp, code 416650 - Product standard
1341 EN 2240-099:2011   Aerospace series - Lamps, incandescent - Part 099:           NC   2 303 MTI
                        Lamp, code 416700 - Product standard
1342 EN 2240-100:2011   Aerospace series - Lamps, incandescent - Part 100:           NC   2 303 MTI
                        Lamp, code 2078 - Product standard
1343 EN 2240-101:2011   Aerospace series - Lamps, incandescent - Part 101:           NC   2 303 MTI
                        Lamp, code 404-02 - Product standard
1344 EN 2242:2012       Aerospace series - Crimping of electric cables with          NC   6 303 MTI
                        conductors defined by EN 2083, EN 4434 and EN 2346

1345 EN 2591-307:2012   Aerospace series - Elements of electrical and optical        NC   3 303 MTI
                        connection - Test methods - Part 307: Salt mist

1346 EN 2591-402:2012   Aerospace series - Elements of electrical and optical      NC     3 303 MTI
                        connection - Test methods - Part 402: Shock
1347 EN 2824:2011       Aerospace series - Burning behaviour of non-metallic       NC     10 303 MTI
                        materials under the influence of radiating heat and flames
                        - Determination of smoke density and gas components in
                        the smoke of materials - Test equipment apparatus and
                        media
1348 EN 2997-002:2012   Aerospace series - Connectors, electrical, circular,         NC   10 303 MTI
                        coupled by threaded ring, fire-resistant or non fire-
                        resistant, operating temperatures - 65 °C to 175 °C
                        continuous, 200 °C continuous, 260 °C peak - Part 002:
                        Specification of performance and contact arrangements


1349 EN 2997-003:2012   Aerospace series - Connectors, electrical, circular,         NC   4 303 MTI
                        coupled by threaded ring, fire-resistant or non fire-
                        resistant, operating temperatures - 65 °C to 175 °C
                        continuous, 200 °C continuous, 260 °C peak - Part 003:
                        Square flange receptacle - Product standard
1350 EN 2997-005:2012   Aerospace series - Connectors, electrical, circular,         NC   4 303 MTI
                        coupled by threaded ring, fire-resistant or non fire-
                        resistant, operating temperatures - 65 °C to 175 °C
                        continuous, 200 °C continuous, 260 °C peak - Part 005:
                        Hermetic square flange receptacle - Product standard


1351 EN 3155-035:2012   Aerospace series - Electrical contacts used in elements NC        6 303 MTI
                        of connection - Part 035: Contacts, electrical, triaxial, size
                        08, female, type D, crimp, class R - Product standard

1352 EN 3155-076:2012   Aerospace series - Electrical contacts used in elements      NC   5 303 MTI
                        of connection - Part 076: Contacts, electrical, male, type
                        A, crimp, class R - Product standard

1353 EN 3155-077:2012   Aerospace series - Electrical contacts used in elements      NC   7 303 MTI
                        of connection - Part 077: Contacts, electrical, female,
                        type A, crimp, class R - Product standard
1354 EN 3310:2011       Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - NC      3 303 MTI
                        Not heat treated - Forging stock, for annealed forgings -
                        De ? 360 mm
1355 EN 3373-007:2012   Aerospace series - Terminal lugs and in-line splices for  NC      4 303 MTI
                        crimping on electric conductors - Part 007: Nickel plated
                        aluminium terminal lugs for crimping on nickel plated
                        aluminium cable for inch series studs - Product standard

1356 EN 3373-008:2012   Aerospace series - Terminal lugs and in-line splices for     NC   5 303 MTI
                        crimping on electric conductors - Part 008: Copper lugs
                        nickel plated ring shaped for copper conductors nickel
                        plated for inch series studs up to 340 °C - Product
                        standard
1357 EN 3375-002:2012   Aerospace series - Cable, electrical, for digital data    NC      4 303 MTI
                        transmission - Part 002: General
1358 EN 3456:2012       Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - NC      3 303 MTI
                        Annealed - Sheet and strip, hot rolled — a ? 6 mm

1359 EN 3475-505:2012   Aerospace series - Cables, electrical, aircraft use - Test   NC   3 303 MTI
                        methods - Part 505: Tensile test on conductors and
                        strands
1360 EN 3745-301:2012   Aerospace series - Fibres and cables, optical, aircraft use NC    3 303 MTI
                        - Test methods - Part 301: Attenuation
1361 EN 3745-405:2012   Aerospace series - Fibres and cables, optical, aircraft use NC    3 303 MTI
                        - Test methods - Part 405: Low/High temperature bend
                        test
1362 EN 3745-515:2012   Aerospace series - Fibres and cables, optical, aircraft use NC    3 303 MTI
                        - Test methods - Part 515: Buffer insertion force

1363 EN 3745-516:2012   Aerospace series - Fibres and cables, optical, aircraft use NC    3 303 MTI
                        - Test methods - Part 516: Severe cable bend test

1364 EN 3745-517:2012   Aerospace series - Fibres and cables, optical, aircraft use NC    3 303 MTI
                        - Test methods - Part 517: Cable tie clamping test

1365 EN 3844-1:2011     Aerospace series - Flammability of non metallic materials NC      7 303 MTI
                        - Part 1: Small burner test, vertical - Determination of the
                        vertical flame propagation
1366 EN 3844-2:2011     Aerospace series - Flammability of non metallic materials NC      7 303 MTI
                        - Part 2: Small burner test, horizontal - Determination of
                        the horizontal flame propagation
1367 EN 3844-3:2011     Aerospace series - Flammability of non metallic materials NC      6 303 MTI
                        - Part 3: Small burner test, 45° - Determination of the
                        resistance of material to flame and glow propagation and
                        to flame penetration
1368 EN 4165-025:2011   Aerospace series - Connectors, electrical, rectangular,      NC   5 303 MTI
                        modular - Operating temperature 175 °C continuous -
                        Part 025: Module receptacle - Product Standard

1369 EN 4531-001:2012   Aerospace series - Connectors, optical, circular, single    NC    16 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 001: Technical specification

1370 EN 4531-002:2012   Aerospace series - Connectors, optical, circular, single    NC    4 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 002: Specification of performance and
                        contact arrangements
1371 EN 4531-003:2012   Aerospace series - Connectors, optical, circular, single    NC    3 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 003: Square flange receptacle - Product
                        standard
1372 EN 4531-004:2012   Aerospace series - Connectors, optical, circular, single    NC     3 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 004: Jam nut receptacle - Product
                        standard
1373 EN 4531-005:2012   Aerospace series - Connectors, optical, circular, single    NC     3 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 005: Plug - Product standard

1374 EN 4531-101:2012   Aerospace series - Connectors, optical, circular, single    NC     5 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 101: Optical contact for EN 4641-100
                        cable - 55 °C to 125 °C - Product standard

1375 EN 4531-901:2012   Aerospace series - Connectors, optical, circular, single    NC     3 303 MTI
                        and multipin, coupled by triple start threaded ring - Flush
                        contacts - Part 901: Filler plugs - Product standard

1376 EN 4608-003:2012   Aerospace series - Cable, electrical, fire resistant - Single NC   5 303 MTI
                        and twisted multicore assembly, screened (braided) and
                        jacketed - Operating temperatures between -65 °C and
                        260 °C - Part 003: DN family - Lightweight - UV Laser
                        printable - Product standard
1377 EN 4608-005:2012   Aerospace series - Cable, electrical, fire resistant - Single NC   5 303 MTI
                        and twisted multicore assembly, screened (braided) and
                        jacketed - Operating temperatures between -65 °C and
                        260 °C - Part 005: DW family - Lightweight two-core
                        gauge 24 for data transmission - UV laser printable -
                        Product standard
1378 EN 4611-002:2012   Aerospace series - Cables, electrical, for general     NC          5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 002: General
1379 EN 4611-003:2012   Aerospace series - Cables, electrical, for general      NC         5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 003: Tin plated copper - Operating temperatures,
                        between -65 °C and 135 °C - Single extruded wall for
                        enclosed applications - UV laser printable - Product
                        standard
1380 EN 4611-004:2012   Aerospace series - Cables, electrical, for general      NC         6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 004: Tin plated copper - Operating temperatures,
                        between –65 °C and 135 °C - Dual extruded wall for open
                        applications - UV laser printable - Product standard


1381 EN 4611-005:2012   Aerospace series - Cables, electrical, for general     NC          5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 005: Silver plated copper — Operating
                        temperatures, between –65 °C and 150 °C - Single
                        extruded wall for enclosed applications - UV laser
                        printable - Product standard
1382 EN 4611-006:2012   Aerospace series - Cables, electrical, for general         NC      6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 006: Silver plated copper - Operating temperatures,
                        between –65 °C and 150 °C - Dual extruded wall for open
                        applications - UV laser printable - Product standard


1383 EN 4611-007:2012   Aerospace series - Cables, electrical, for general         NC      6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 007: Nickel plated copper - Operating
                        temperatures, between –65 °C and 150 °C - Dual
                        extruded wall for open applications - UV laser printable -
                        Product standard
1384 EN 4611-008:2012   Aerospace series - Cables, electrical, for general       NC     5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 008: BP - Nickel plated copper - Operating
                        temperatures, between –65 °C and 150 °C - Dual
                        extruded wall for open applications with additional
                        protection in areas of high vibration, cable flexing and
                        fluid contamination - UV laser printable - Product
                        standard
1385 EN 4611-009:2012   Aerospace series - Cables, electrical, for general       NC     5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Part 009: BJ - Nickel plated copper - Operating
                        temperatures, between –65 °C and 150 °C - Single
                        extruded wall for use as cable cores or within equipment
                        in areas of high vibration, cable flexing and fluid
                        contamination - UV laser printable - Product standard


1386 EN 4612-002:2011   Aerospace series - Cables, electrical, for general      NC      5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 002: General

1387 EN 4612-003:2011   Aerospace series - Cables, electrical, for general         NC   5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - jacketed or screened and jacketed - Part 003: Tin plated
                        copper - Operating temperatures, between - 65 °C and
                        135 °C - Single extruded wall for open applications, with
                        jacket without screen - UV laser printable - Product
                        standard
1388 EN 4612-004:2011   Aerospace series - Cables, electrical, for general       NC     6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 004: Tin
                        plated copper - Operating temperatures, between - 65 °C
                        and 135 °C - Single extruded wall for open applications,
                        with jacket and screen (braid) - UV laser printable -
                        Product standard
1389 EN 4612-005:2011   Aerospace series - Cables, electrical, for general         NC   5 303 MTI
                        purpose, single and multicore assembly XLETFE Family
                        jacketed or screened and jacketed - Part 005: Tin plated
                        copper - Operating temperatures, between - 65 °C and
                        135 °C - Dual extruded wall for open applications, with
                        jacket without screen - UV laser printable - Product
                        standard
1390 EN 4612-006:2011   Aerospace series - Cables, electrical, for general      NC      6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 006: Tin
                        plated copper - Operating temperatures, between - 65 °C
                        and 135 °C - Dual extruded wall for open applications,
                        with jacket and screen (braid) - UV laser printable -
                        Product standard
1391 EN 4612-007:2011   Aerospace series - Cables, electrical, for general        NC    5 303 MTI
                        purpose, single and multicore assembly XLETFE Family
                        jacketed or screened and jacketed - Part 007: Silver
                        plated copper - Operating temperatures, between - 65 °C
                        and 150 °C - Single extruded wall for open applications,
                        with jacket without screen - UV laser printable - Product
                        standard
1392 EN 4612-008:2011   Aerospace series - Cables, electrical, for general       NC     6 303 MTI
                        purpose, single and multicore assembly XLETFE Family
                        jacketed or screened and jacketed - Part 008: Silver
                        plated copper - Operating temperatures, between - 65 °C
                        and 150 °C - single extruded wall for open applications,
                        with jacket and screen (braid) - UV laser printable -
                        Product standard
1393 EN 4612-009:2011   Aerospace series - Cables, electrical, for general        NC    5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 009: Silver
                        plated copper - Operating temperatures, between - 65 °C
                        and 150 °C - Dual extruded wall for open applications,
                        with jacket without screen - UV laser printable - Product
                        standard
1394 EN 4612-010:2011   Aerospace series - Cables, electrical, for general Cables, NC   6 303 MTI
                        electrical, for general purpose, single and multicore
                        assembly - XLETFE Family - Jacketed or screened and
                        jacketed - Part 010: Silver plated copper - Operating
                        temperatures, between - 65 °C and 150 °C - Dual
                        extruded wall for open applications, with jacket and
                        screen (braid) - UV laser printable - Product standard


1395 EN 4612-011:2011   Aerospace series - Cables, electrical, for general        NC    5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 011: Nickel
                        plated copper - Operating temperatures, between - 65 °C
                        and 150 °C - Dual extruded wall for open applications,
                        with jacket without screen - UV laser printable - Product
                        standard
1396 EN 4612-012:2011   Aerospace series - Cables, electrical, for general      NC      6 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 012: Nickel
                        plated copper - Operating temperatures, between - 65 °C
                        and 150 °C - Dual extruded wall for open applications,
                        with jacket and screen (braid) - UV laser printable -
                        Product standard
1397 EN 4612-013:2011   Aerospace series - Cables, electrical, for general         NC   5 303 MTI
                        purpose, single and multicore assembly - XLETFE Family
                        - Jacketed or screened and jacketed - Part 013: SX, TC
                        and UC - Nickel plated copper - Operating temperatures,
                        between - 65 °C and 150 °C - Single extruded wall for
                        equipment only, with jacket and screen (spiral) - UV laser
                        printable - Product standard


1398 EN 4644-001:2012   Aerospace series - Connector, electrical and optical,    NC     28 303 MTI
                        rectangular, modular, rectangular inserts, operating
                        temperature 175 °C (or 125 °C) continuous - Part 001:
                        Technical specification
1399 EN 4644-002:2012   Aerospace series - Connector, electrical and optical,    NC     10 303 MTI
                        rectangular, modular, rectangular inserts, operating
                        temperature 175 °C (or 125 °C) continuous - Part 002:
                        Specification of performance and contact arrangements

1400 EN 4644-003:2011   Aerospace series - Connector, electrical and optical,    NC     3 303 MTI
                        rectangular, modular, rectangular inserts, operating
                        temperature 175 °C (or 125 °C) continuous - Part 003:
                        Rectangular inserts - Product standard

1401 EN 4644-131:2011   Aerospace series - Connector, electrical and optical,    NC     3 303 MTI
                        rectangular, modular, rectangular inserts, operating
                        temperature 175 °C (or 125 °C) continuous - Part 131:
                        Size 3 plug for rack and panel applications - Product
                        standard
1402 EN 4644-133:2011   Aerospace series - Connector, electrical and optical,      NC   4 303 MTI
                        rectangular, modular, rectangular inserts, operating
                        temperature 175 °C (or 125 °C) continuous - Part 133:
                        Size 3 receptacle for rack and panel application - Product
                        standard
1403 EN 4644-141:2011          Aerospace series - Connector, electrical and optical,          NC    3 303 MTI
                               rectangular, modular, rectangular inserts, operating
                               temperature 175 °C (or 125 °C) continuous - Part 141:
                               Size 4 plug for rack and panel applications - Product
                               standard
1404 EN 4644-142:2012          Aerospace series - Connector, electrical and optical,      NC        4 303 MTI
                               rectangular, modular, rectangular inserts, operating
                               temperature 175 °C (or 125 °C) continuous - Part 142:
                               Size 4 receptacle for rack and panel application - Product
                               standard
1405 EN 4817:2012              Aerospace series - Passive UHF RFID tags intended for          NC   12 303 MTI
                               aircraft use
1406 EN 4818:2012              Aerospace series - Passive HF RFID tags intended for           NC   12 303 MTI
                               aircraft use
1407 EN 4819:2012              Aerospace series - Contact Memory Button (CMB) tags            NC    7 303 MTI
                               intended for aircraft use
1408 EN 6049-006:2012          Aerospace series - Electrical cables, installation -           NC    4 303 MTI
                               Protection sleeve in meta-aramid fibres - Part 006: Self-
                               wrapping protective sleeve, flexible post installation -
                               Product standard
1409 EN 6049-007:2012          Aerospace series - Electrical cables, installation -           NC    5 303 MTI
                               Protection sleeve in meta-aramid fibres - Part 007: Self-
                               wrapping protective sleeve, flexible post installation
                               operating temperature from - 55 °C to 260 °C - Product
                               standard
1410 EN 6059-100:2011          Aerospace series - Electrical cables, installation -           NC    3 303 MTI
                               Protection sleeves - Test methods - Part 100: General

1411 EN 6059-503:2012          Aerospace series - Electrical cables, installation -           NC    3 303 MTI
                               Protection sleeves - Test methods - Part 503:
                               Temperature rise due to rated current injected on the
                               sleeve
1412 EN 9137:2012              Quality management systems - Guidance for the                  NC   10 303 MTI
                               Application of AQAP 2110 within an EN 9100 Quality
                               Management System
1413 EN 61821:2011             Electrical installations for lighting and beaconing of         NC   30 303 MTI
                               aerodromes - Maintenance of aeronautical ground
                               lighting constant current series circuits
1414 EN ISO 12855:2012         Electronic fee collection - Information exchange between NC         70 345 MTI
                               service provision and toll charging (ISO 12855:2012)

1415 EN ISO 14906:2011         Electronic fee collection - Application interface definition   NC   103 345 MTI
                               for dedicated short-range communication (ISO
                               14906:2011)
1416 EN ISO 15006:2011         Road vehicles - Ergonomic aspects of transport                 NC   16 345 MTI
                               information and control systems - Specifications for in-
                               vehicle auditory presentation (ISO 15006:2011)
1417 EN 15876-1:2010+A1:2012   Electronic fee collection - Evaluation of on-board and         NC   83 345 MTI
                               roadside equipment for conformity to EN 15509 - Part 1:
                               Test suite structure and test purposes
1418 EN 16062:2011             Intelligent transport systems - eSafety - eCall high level     NC   71 345 MTI
                               application requirements (HLAP)
1419 EN 16072:2011             Intelligent transport systems - eSafety - Pan-European         NC   31 345 MTI
                               eCall operating requirements
1420 EN 16102:2011             Intelligent transport systems - eCall - Operating              NC   54 345 MTI
                               requirements for third party support
                                  SECTIUNEA 2

         Standarde europene armonizate ce se adoptă ca standarde
                române prin elaborarea versiunii române (T)

                                                                                                Pa-
                                                                                        Metoda
                                                                                                gini                     Mini-
Nr crt          Indicativ EN                              Titlu                         adop-         Directiva     CT
                                                                                               eligib                    ster
                                                                                         tare
                                                                                                 ile
     1 EN 300 220-2 v2.3.1:2010   Electromagnetic compatibility and Radio              NCT         15 1999/5/EC      6 MCSI
                                  spectrum Matters (ERM);Short Range Devices
                                  (SRD);Radio equipment to be used in the 25 MHz
                                  to 1 000 MHz frequency range with power levels
                                  ranging up to 500 mW;Part 2: Harmonized EN
                                  covering essential requirements under article 3.2
                                  of the R&TTE Directive


     2 EN 300 328 v1.7.1:2006     Electromagnetic compatibility and Radio         NCT             32 1999/5/EC       6 MCSI
                                  spectrum Matters (ERM);Wideband transmission
                                  systems;Data transmission equipment operating
                                  in the 2,4 GHz ISM band and using wide band
                                  modulation techniques;Harmonized EN covering
                                  essential requirements under article 3.2 of the
                                  R&TTE Directive


     3 EN 302 296-2 v1.2.1:2011   Electromagnetic compatibility and Radio            NCT          20 1999/5/EC       6 MCSI
                                  spectrum Matters (ERM);Transmitting equipment
                                  for the digital television broadcast service,
                                  Terrestrial (DVB-T);Part 2: Harmonized EN
                                  covering the essential requirements of article 3.2
                                  of the R&TTE Directive


     4 EN 61326-2-4:2006          Electrical equipment for measurement, control      NCT          13 2004/108/EC    23 MCSI
                                  and laboratory use - EMC requirements -- Part 2-
                                  4: Particular requirements - Test configurations,
                                  operational conditions and performance criteria
                                  for insulation monitoring devices according to IEC
                                  61557-8 and for equipment for insulation fault
                                  location according to IEC 61557-9



     5 EN 50130-4:2011            Alarm systems -- Part 4: Electromagnetic          NCT           24 2004/108/EC    27 MCSI
                                  compatibility - Product family standard: Immunity
                                  requirements for components of fire, intruder,
                                  hold up, CCTV, access control and social alarm
                                  systems
     6 EN 50529-1:2010            EMC Network Standard -- Part 1: Wire-line            NCT          7 2004/108/EC   30 MCSI
                                  telecommunications networks using telephone
                                  wires
     7 EN 50529-2:2010            EMC Network Standard -- Part 2: Wire-line            NCT        12 2004/108/EC    30 MCSI
                                  telecommunications networks using coaxial
                                  cables
     8 EN 55015:2006              Limits and methods of measurement of radio           NCT        35 2004/108/EC    30 MCSI
                                  disturbance characteristics of electrical lighting
                                  and similar equipment
     9 EN 55015:2006/A1:2007      Limits and methods of measurement of radio           NCT          6 2004/108/EC   30 MCSI
                                  disturbance characteristics of electrical lighting
                                  and similar equipment
10 EN 55015:2006/A2:2009      Limits and methods of measurement of radio              NCT    3 2004/108/EC    30 MCSI
                              disturbance characteristics of electrical lighting
                              and similar equipment
11 EN 55024:2010              Information technology equipment - Immunity             NCT   43 2004/108/EC    30 MCSI
                              characteristics - Limits and methods of
                              measurement
12 EN 50083-2:2012            Cable networks for television signals, sound            TR    49 2004/108/EC    375 MCSI
                              signals and interactive services -- Part 2:
                              Electromagnetic compatibility for equipment
13 EN 331:1998                Manually operated ball valves and closed bottom FCT           21 89/106/EEC     89 MDRT
                              taper plug valves for gas installations for buildings

14 EN 331:1998/A1:2010        Manually operated ball valves and closed bottom NCT           28 89/106/EEC     89 MDRT
                              taper plug valves for gas installations for buildings

15 EN 197-1:2011              Cement - Part 1: Composition, specifications and        NCT   36 89/106/EEC     111 MDRT
                              conformity criteria for common cements
16 EN 413-1:2011              Masonry cement - Part 1: Composition,                   NCT   18 89/106/EEC     111 MDRT
                              specifications and conformity criteria
17 EN 459-1:2010              Building lime - Part 1: Definitions, specifications     NCT   37 89/106/EEC     111 MDRT
                              and conformity criteria
18 EN 12859:2011              Gypsum blocks - Definitions, requirements and           NCT   22 89/106/EEC     111 MDRT
                              test methods
19 EN 490:2011                Concrete roofing tiles and fittings for roof covering   NCT   21 89/106/EEC     113 MDRT
                              and wall cladding - Product specifications

20 EN 544:2011                Bitumen shingles with mineral and/or synthetic          NCT   23 89/106/EEC     113 MDRT
                              reinforcements - Product specification and test
                              methods
21 EN 14909:2012              Flexible sheets for waterproofing - Plastic and         TR    22 89/106/EEC     113 MDRT
                              rubber damp proof courses - Definitions and
                              characteristics
22 EN 15599-1:2010            Thermal insulation products for building                NCT   19 89/106/EEC     113 MDRT
                              equipment and industrial installations - In-situ
                              thermal insulation formed from expanded perlite
                              (EP) products - Part 1: Specification for bonded
                              and loose-fill products before installation


23 EN 15600-1:2010            Thermal insulation products for building                NCT   19 89/106/EEC     113 MDRT
                              equipment and industrial installations - In-situ
                              thermal insulation formed from exfoliated
                              vermiculite (EV) products - Part 1: Specification
                              for bonded and loose-fill products before
                              installation
24   EN 997:2012              WC pans and WC suites with integral trap                NCT   45   89/106/EEC   114   MDRT
25   EN 997:2012/AC:2012      WC pans and WC suites with integral trap                TR     1   89/106/EEC   114   MDRT
26   EN 14055:2010            WC and urinal flushing cisterns                         NCT   33   89/106/EEC   114   MDRT
27   EN 14516:2006+A1:2010    Baths for domestic purposes                             NCT   16   89/106/EEC   114   MDRT
28   EN 14527:2006+A1:2010    Shower trays for domestic purposes                      NCT   15   89/106/EEC   114   MDRT
29   EN 1279-5:2005+A2:2010   Glass in building - Insulating glass units - Part 5:    NCT   32   89/106/EEC   122   MDRT
                              Evaluation of conformity
30 EN 13341:2005+A1:2011      Static thermoplastic tanks for above ground             NCT   29 89/106/EEC     169 MDRT
                              storage of domestic heating oils, kerosene and
                              diesel fuels - Blow moulded and rotationally
                              moulded polyethylene tanks and rotationally
                              moulded tanks made of anionically polymerized
                              polyamide 6 - Requirements and test methods


31 EN 1317-5:2007+A2:2012     Road restraint systems - Part 5: Product                NCT   31 89/106/EEC     187 MDRT
                              requirements and evaluation of conformity for
                              vehicle restraint systems
32 EN 1317-                  Road restraint systems - Part 5: Product            TR      2 89/106/EEC   187 MDRT
   5:2007+A2:2012/AC:2012    requirements and evaluation of conformity for
                             vehicle restraint systems
33 EN 1423:2012              Road marking materials - Drop on materials -     NCT       53 89/106/EEC   187 MDRT
                             Glass beads, antiskid aggregates and mixtures of
                             the two
34 EN 54-25:2008/AC:2012     Fire detection and fire alarm systems - Part 25:    TR      1 89/106/EEC   216 MDRT
                             Components using radio links
35 EN 12101-7:2011           Smoke and heat control systems - Part 7: Smoke      NCT    28 89/106/EEC   216 MDRT
                             duct sections
36 EN 12101-8:2011           Smoke and heat control systems - Part 8: Smoke      NCT    38 89/106/EEC   216 MDRT
                             control dampers
37 EN 15650:2010             Ventilation for buildings - Fire dampers            NCT    31 89/106/EEC   302 MDRT
38 EN 15821:2010             Multi-firing sauna stoves fired by natural wood     NCT    48 89/106/EEC   305 MDRT
                             logs - Requirements and test methods
39 EN 13241-1:2003+A1:2011   Industrial, commercial and garage doors and         NCT    25 89/106/EEC   318 MDRT
                             gates - Product standard - Part 1: Products
                             without fire resistance or smoke control
                             characteristics
40 EN 1168:2005+A3:2011      Precast concrete products - Hollow core slabs       NCT    56 89/106/EEC   321 MDRT

41 EN 1520:2011              Prefabricated reinforced components of              NCT   101 89/106/EEC   321 MDRT
                             lightweight aggregate concrete with open
                             structure with structural or non-structural
                             reinforcement
42 EN 12839:2012             Precast concrete products - Elements for fences     NCT    30 89/106/EEC   321 MDRT

43 EN 13224:2011             Precast concrete products - Ribbed floor            NCT    26 89/106/EEC   321 MDRT
                             elements
44 EN 14844:2006+A2:2011     Precast concrete products - Box culverts            NCT    27 89/106/EEC   321 MDRT
45 EN 15037-2:2009+A1:2011   Precast concrete products - Beam-and-block floor    NCT    23 89/106/EEC   321 MDRT
                             systems - Part 2: Concrete blocks
46 EN 15037-3:2009+A1:2011   Precast concrete products - Beam-and-block floor    NCT    28 89/106/EEC   321 MDRT
                             systems - Part 3: Clay blocks
47 EN 15050:2007+A1:2012     Precast concrete products - Bridge elements         NCT    36 89/106/EEC   321 MDRT
48 EN 15102:2007+A1:2011     Decorative wall coverings - Roll and panel form     NCT    24 89/106/EEC   324 MDRT

49 EN 1090-1:2009+A1:2011    Execution of steel structures and aluminium         NCT    42 89/106/EEC   326 MDRT
                             structures - Part 1: Requirements for conformity
                             assessment of structural components

50 EN 14081-1:2005+A1:2011   Timber structures - Strength graded structural      NCT    28 89/106/EEC   326 MDRT
                             timber with rectangular cross section - Part 1:
                             General requirements
51 EN 14229:2010             Structural timber - Wood poles for overhead lines NCT      35 89/106/EEC   326 MDRT

52 EN 771-1:2011             Specification for masonry units - Part 1: Clay      NCT    47 89/106/EEC   347 MDRT
                             masonry units
53 EN 771-2:2011             Specification for masonry units - Part 2: Calcium   NCT    31 89/106/EEC   347 MDRT
                             silicate masonry units
54 EN 771-3:2011             Specification for masonry units - Part 3:           NCT    32 89/106/EEC   347 MDRT
                             Aggregate concrete masonry units (Dense and
                             lightweight aggregates)
55 EN 771-4:2011             Specification for masonry units - Part 4:           NCT    28 89/106/EEC   347 MDRT
                             Autoclaved aerated concrete masonry units
56 EN 771-5:2011             Specification for masonry units - Part 5:           NCT    29 89/106/EEC   347 MDRT
                             Manufactured stone masonry units
57 EN 771-6:2011             Specification for masonry units - Part 6: Natural   NCT    27 89/106/EEC   347 MDRT
                             stone masonry units
58 EN 998-1:2010             Specification for mortar for masonry - Part 1:      NCT    18 89/106/EEC   347 MDRT
                             Rendering and plastering mortar
59 EN 998-2:2010               Specification for mortar for masonry - Part 2:     NCT      22 89/106/EEC   347 MDRT
                               Masonry mortar
60 EN 1457-1:2012              Chimneys - Clay/ceramic flue liners - Part 1: Flue NCT      34 89/106/EEC   347 MDRT
                               liners operating under dry conditions -
                               Requirements and test methods
61 EN 1457-2:2012              Chimneys - Clay/ceramic flue liners - Part 2: Flue NCT      37 89/106/EEC   347 MDRT
                               liners operating under wet conditions -
                               Requirements and test methods
62 EN 1857:2010                Chimneys - Components - Concrete flue liners        NCT     34 89/106/EEC   347 MDRT

63 EN 1858:2008+A1:2011        Chimneys - Components - Concrete flue blocks        NCT     36 89/106/EEC   347 MDRT

64 EN 12446:2011               Chimneys - Components - Concrete outer wall       NCT       29 89/106/EEC   347 MDRT
                               elements
65 EN 60947-4-1:2010           Low-voltage switchgear and controlgear -- Part 4- NCT      113 2006/95/EC    9 MECMA
                               1: Contactors and motor-starters -
                               Electromechanical contactors and motor-starters

66 EN 60947-4-3:2000/A2:2011   Low-voltage switchgear and controlgear -- Part 4- NCT        9 2006/95/EC    9 MECMA
                               3: Contactors and motor-starters - AC
                               semiconductor controllers and contactors for non-
                               motor loads
67 EN 61439-1:2011             Low-voltage switchgear and controlgear              NCT    146 2006/95/EC    9 MECMA
                               assemblies -- Part 1: General rules
68 EN 61439-2:2011             Low-voltage switchgear and controlgear              NCT     19 2006/95/EC    9 MECMA
                               assemblies -- Part 2: Power switchgear and
                               controlgear assemblies
69 EN 61439-5:2011             Low-voltage switchgear and controlgear              NCT     23 2006/95/EC    9 MECMA
                               assemblies -- Part 5: Assemblies for power
                               distribution in public networks
70 EN 62208:2011               Empty enclosures for low-voltage switchgear and TR          23 2006/95/EC    9 MECMA
                               controlgear assemblies - General requirements

71 EN 50085-2-1:2006/A1:2011   Cable trunking systems and cable ducting            TR       3 2006/95/EC   11 MECMA
                               systems for electrical installations -- Part 2-1:
                               Cable trunking systems and cable ducting
                               systems intended for mounting on walls and
                               ceilings
72 EN 50550:2011               Power frequency overvoltage protective device       NCT     32 2006/95/EC   11 MECMA
                               for household and similar applications (POP)

73 EN 61058-2-5:2011           Switches for appliances -- Part 2-5: Particular     NCT      9 2006/95/EC   11 MECMA
                               requirements for change-over selectors

74 EN 61534-1:2011             Powertrack systems -- Part 1: General                NCT    58 2006/95/EC   11 MECMA
                               requirements
75 EN 62080:2009               Sound signalling devices for household and           NCT    77 2006/95/EC   11 MECMA
                               similar purposes
76 EN 60127-1:2006/A1:2011     Miniature fuses -- Part 1: Definitions for miniature NCT     2 2006/95/EC   12 MECMA
                               fuses and general requirements for miniature
                               fuse-links
77 EN 60127-2:2003/A2:2010     Miniature fuses -- Part 2: Cartridge fuse-links     NCT      3 2006/95/EC   12 MECMA
78 EN 60269-6:2011             Low-voltage fuses -- Part 6: Supplementary          NCT     22 2006/95/EC   12 MECMA
                               requirements for fuse-links for the protection of
                               solar photovoltaic energy systems
79 EN 60691:2003/A2:2010       Thermal-links - Requirements and application     NCT         3 2006/95/EC   12 MECMA
                               guide
80 EN 61010-1:2010             Safety requirements for electrical equipment for NCT       147 2006/95/EC   24 MECMA
                               measurement, control, and laboratory use -- Part
                               1: General requirements
 81 EN 60695-11-4:2011        Fire hazard testing -- Part 11-4: Test flames - 50        TR     14 2006/95/EC    33 MECMA
                              W flame - Apparatus and confirmational test
                              method
 82 EN 62109-2:2011           Safety of power converters for use in photovoltaic NCT           39 2006/95/EC    35 MECMA
                              power systems -- Part 2: Particular requirements
                              for inverters
 83 EN 62253:2011             Photovoltaic pumping systems - Design                     NCT    22 2006/95/EC    35 MECMA
                              qualification and performance measurements
 84 EN 61204-7:2006           Low voltage power supplies, d.c. output -- Part 7:        NCT   162 2006/95/EC    36 MECMA
                              Safety requirements
 85 EN 60825-2:2004/A2:2010   Safety of laser products -- Part 2: Safety of             NCT     8 2006/95/EC    38 MECMA
                              optical fibre communication systems (OFCS)
 86 EN 60825-4:2006/A2:2011   Safety of laser products -- Part 4: Laser guards          NCT     8 2006/95/EC    38 MECMA

 87 EN 287-1:2011             Qualification test of welders - Fusion welding -          NCT    25 2009/105/EC   39 MECMA
                              Part 1: Steels
 88 EN 1563:2011              Founding - Spheroidal graphite cast irons                 TR     34 97/23/EC      47 MECMA
 89 EN 1564:2011              Founding - Ausferritic spheroidal graphite cast           TR     25 97/23/EC      47 MECMA
                              irons
 90 EN ISO/IEC 17020:2012     Conformity assessment - Requirements for the              TR     25 765/2008      56 MECMA
                              operation of various types of bodies performing
                              inspection (ISO/IEC 17020:2012)
 91 EN ISO 19011:2011         Guidelines for auditing management systems                NCT    55 765/2008      56 MECMA
                              (ISO 19011:2011)
 92 EN 913:2008               Gymnastic equipment - General safety                      NCT    10 2001/95/EC    66 MECMA
                              requirements and test methods
 93 EN 916:2003               Gymnastic equipment - Vaulting boxes -                    FCT     4 2001/95/EC    66 MECMA
                              Requirements and test methods including safety

 94 EN 957-1:2005             Stationary training equipment - Part 1: General           NCT    12 2001/95/EC    66 MECMA
                              safety requirements and test methods

 95 EN 957-10:2005            Stationary training equipment - Part 10: Exercise NCT             8 2001/95/EC    66 MECMA
                              bicycles with a fixed wheel or without freewheel,
                              additional specific safety requirements and test
                              methods
 96 EN 957-2:2003             Stationary training equipment - Part 2: Strength          FCT     8 2001/95/EC    66 MECMA
                              training equipment, additional specific safety
                              requirements and test methods

 97 EN 957-7:1998             Stationary training equipment - Part 7: Rowing    FCT             9 2001/95/EC    66 MECMA
                              machines, additional specific safety requirements
                              and test methods
 98 EN 957-8:1998             Stationary training equipment - Part 8: Steppers,         FCT     9 2001/95/EC    66 MECMA
                              stairclimbers and climbers - Additional specific
                              safety requirements and test methods

 99 EN 957-9:2003             Stationary training equipment - Part 9: Elliptical        FCT     7 2001/95/EC    66 MECMA
                              trainers, additional specific safety requirements
                              and test methods
100 EN 12197:1997             Gymnastic equipment - Horizontal bars - Safety            FCT     6 2001/95/EC    66 MECMA
                              requirements and test methods
101 EN 13899:2003             Roller sports equipment - Roller skates - Safety          FCT     9 2001/95/EC    66 MECMA
                              requirements and test methods
102 EN 14872:2006             Bicycles - Accessories for bicycles - Luggage             NCT    12 2001/95/EC    78 MECMA
                              carriers
103 EN 81-31:2010             Safety rules for the construction and installation        NCT   135 2006/42/EC    85 MECMA
                              of lifts - Lifts for the transport of goods only - Part
                              31: Accessible goods only lifts
104 EN 81-41:2010               Safety rules for the construction and installation      NCT    81 2006/42/EC   85 MECMA
                                of lifts - Special lifts for the transport of persons
                                and goods - Part 41: Vertical lifting platforms
                                intended for use by persons with impaired
                                mobility
105 EN 1570-1:2011              Safety requirements for lifting tables - Part 1:        NCT    55 2006/42/EC   85 MECMA
                                Lifting tables serving up to two fixed landings

106 EN 12159:2000+A1:2009       Builders hoists for persons and materials with          NCT    56 2006/42/EC   85 MECMA
                                vertically guided cages
107 EN 13121-3:2008+A1:2010     GRP tanks and vessels for use above ground -            NCT   136 97/23/EC     108 MECMA
                                Part 3: Design and workmanship
108 EN 14154-1:2005+A2:2011     Water meters - Part 1: General requirements             NCT    44 2004/22/EC   109 MECMA
109 EN 14154-2:2005+A2:2011     Water meters - Part 2: Installation and conditions      NCT    22 2004/22/EC   109 MECMA
                                of use
110 EN 14154-3:2005+A2:2011     Water meters - Part 3: Test methods and                 NCT    68 2004/22/EC   109 MECMA
                                equipment
111 EN 581-1:2006               Outdoor furniture - Seating and tables for              NCT     4 2001/95/EC   118 MECMA
                                camping, domestic and contract use - Part 1:
                                General safety requirements
112 EN 71-1:2011                Safety of toys - Part 1: Mechanical and physical NCT          127 2009/48/EC   125 MECMA
                                properties
113 EN 71-8:2011                Safety of toys - Part 8: Activity toys for domestic NCT        43 2009/48/EC   125 MECMA
                                use
114 EN 1273:2005                Child use and care articles - Baby walking frames FCT          16 2001/95/EC   125 MECMA
                                - Safety requirements and test methods

115 EN 14344:2004               Child use and care articles - Child seats for           FCT    33 2001/95/EC   125 MECMA
                                cycles - Safety requirements and test methods

116 EN 61812-1:2011             Time relays for industrial and residential use -- NCT          43 2006/95/EC   128 MECMA
                                Part 1: Requirements and tests
117 EN 60974-12:2011            Arc welding equipment -- Part 12: Coupling        TR           12 2006/95/EC   129 MECMA
                                devices for welding cables
118 EN 60974-13:2011            Arc welding equipment -- Part 13: Welding clamp NCT             9 2006/95/EC   129 MECMA

119 EN 60730-2-7:2010/AC:2011   Automatic electrical controls for household and      TR         1 2006/95/EC   130 MECMA
                                similar use -- Part 2-7: Particular requirements for
                                timers and time switches
120 EN 60061-1:1993/A45:2011    Lamp caps and holders together with gauges for TR              14 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                1: Lamp caps
121 EN 60061-1:1993/A46:2011    Lamp caps and holders together with gauges for TR               9 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                1: Lamp caps
122 EN 60061-2:1993/A39:2009    Lamp caps and holders together with gauges for NCT              8 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                2: Lampholders
123 EN 60061-2:1993/A42:2011    Lamp caps and holders together with gauges for TR               8 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                2: Lampholders
124 EN 60061-2:1993/A43:2011    Lamp caps and holders together with gauges for TR               7 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                2: Lampholders
125 EN 60061-3:1993/A33:2004    Lamp caps and holders together with gauges for FCT             59 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                3: Gauges
126 EN 60061-3:1993/A34:2005    Lamp caps and holders together with gauges for NCT             33 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                3: Gauges
127 EN 60061-3:1993/A35:2005   Lamp caps and holders together with gauges for NCT     24 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
128 EN 60061-3:1993/A36:2006   Lamp caps and holders together with gauges for NCT     11 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
129 EN 60061-3:1993/A37:2007   Lamp caps and holders together with gauges for NCT     33 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
130 EN 60061-3:1993/A38:2007   Lamp caps and holders together with gauges for NCT     30 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
131 EN 60061-3:1993/A39:2009   Lamp caps and holders together with gauges for NCT     33 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
132 EN 60061-3:1993/A4:1996    Lamp caps and holders together with gauges for FCT     36 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
133 EN 60061-3:1993/A40:2009   Lamp caps and holders together with gauges for NCT     29 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
134 EN 60061-3:1993/A43:2011   Lamp caps and holders together with gauges for TR      31 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
135 EN 60061-3:1993/A44:2011   Lamp caps and holders together with gauges for TR      30 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
136 EN 60061-3:1993/A5:1996    Lamp caps and holders together with gauges for FCT     36 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
137 EN 60061-3:1993/A6:1996    Lamp caps and holders together with gauges for FCT     22 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
138 EN 60061-3:1993/A7:1997    Lamp caps and holders together with gauges for FCT     26 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               3: Gauges
139 EN 60061-4:1992/A1:1995    Lamp caps and holders together with gauges for FCT     36 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information

140 EN 60061-4:1992/A10:2006   Lamp caps and holders together with gauges for NCT      7 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information

141 EN 60061-4:1992/A11:2007   Lamp caps and holders together with gauges for NCT      5 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information

142 EN 60061-4:1992/A12:2009   Lamp caps and holders together with gauges for NCT      8 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information

143 EN 60061-4:1992/A13:2011   Lamp caps and holders together with gauges for NCT     15 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information

144 EN 60061-4:1992/A14:2011   Lamp caps and holders together with gauges for TR       5 2006/95/EC   131 MECMA
                               the control of interchangeability and safety -- Part
                               4: Guidelines and general information
145 EN 60061-4:1992/A2:1995     Lamp caps and holders together with gauges for FCT         9 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

146 EN 60061-4:1992/A3:1995     Lamp caps and holders together with gauges for FCT        13 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

147 EN 60061-4:1992/A5:1998     Lamp caps and holders together with gauges for FCT        10 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

148 EN 60061-4:1992/A6:2000     Lamp caps and holders together with gauges for FCT         8 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

149 EN 60061-4:1992/A7:2001     Lamp caps and holders together with gauges for FCT         6 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

150 EN 60061-4:1992/A8:2003     Lamp caps and holders together with gauges for FCT        17 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

151 EN 60061-4:1992/A9:2005     Lamp caps and holders together with gauges for NCT         6 2006/95/EC   131 MECMA
                                the control of interchangeability and safety -- Part
                                4: Guidelines and general information

152 EN 60238:2004/A2:2011       Edison screw lampholders                            NCT    5 2006/95/EC   131 MECMA
153 EN 60400:2008/A1:2011       Lampholders for tubular fluorescent lamps and       NCT   12 2006/95/EC   131 MECMA
                                starterholders
154 EN 60598-2-3:2003/A1:2011   Luminaires -- Part 2-3: Particular requirements -   NCT    5 2006/95/EC   131 MECMA
                                Luminaires for road and street lighting

155 EN 60662:1993/A4:1994       High-pressure sodium vapour lamps                   FCT   38 2006/95/EC   131 MECMA
156 EN 60838-1:2004/A2:2011     Miscellaneous lampholders -- Part 1: General        NCT    6 2006/95/EC   131 MECMA
                                requirements and tests
157 EN 61184:2008/A1:2011       Bayonet lampholders                                 NCT    5 2006/95/EC   131 MECMA
158 EN 61199:2011               Single-capped fluorescent lamps - Safety            TR    31 2006/95/EC   131 MECMA
                                specifications
159 EN 61347-1:2008/A1:2011     Lamp controlgear -- Part 1: General and safety      NCT    6 2006/95/EC   131 MECMA
                                requirements
160 EN 61347-2-3:2011           Lamp control gear -- Part 2-3: Particular           NCT   25 2006/95/EC   131 MECMA
                                requirements for a.c. and/or d.c. supplied
                                electronic control gear for fluorescent lamps
161 EN 62532:2011               Fluorescent induction lamps - Safety             NCT      17 2006/95/EC   131 MECMA
                                specifications
162 EN 14276-1:2006+A1:2011     Pressure equipment for refrigerating systems and NCT      70 97/23/EC     147 MECMA
                                heat pumps - Part 1: Vessels - General
                                requirements
163 EN 14276-2:2007+A1:2011     Pressure equipment for refrigerating systems and NCT      22 97/23/EC     147 MECMA
                                heat pumps - Part 2: Piping - General
                                requirements
164 EN 13445-4:2009/A1:2011     Unfired pressure vessels - Part 4: Fabrication      TR     5 97/23/EC     152 MECMA

165 EN 13445-5:2009/A1:2011     Unfired pressure vessels - Part 5: Inspection and NCT      2 97/23/EC     152 MECMA
                                testing
166 EN 13445-5:2009/A2:2011     Unfired pressure vessels - Part 5: Inspection and NCT      4 97/23/EC     152 MECMA
                                testing
167 EN 13445-5:2009/A3:2011     Unfired pressure vessels - Part 5: Inspection and NCT      2 97/23/EC     152 MECMA
                                testing
168 EN 15776:2011               Unfired pressure vessels - Requirements for the NCT         29 97/23/EC     152 MECMA
                                design and fabrication of pressure vessels and
                                pressure parts constructed from cast iron with an
                                elongation after fracture equal or less than 15 %

169 EN 50363-0:2011             Insulating, sheathing and covering materials for      NCT    7 2006/95/EC   159 MECMA
                                low-voltage energy cables -- Part 0: General
                                introduction
170 EN 50363-2-1:2005/A1:2011   Insulating, sheathing and covering materials for      NCT    2 2006/95/EC   159 MECMA
                                low voltage energy cables -- Part 2-1: Cross-
                                linked elastomeric sheathing compounds

171 EN 50363-3:2005/A1:2011     Insulating, sheathing and covering materials for      NCT    2 2006/95/EC   159 MECMA
                                low voltage energy cables -- Part 3: PVC
                                insulating compounds
172 EN 50363-5:2005/A1:2011     Insulating, sheathing and covering materials for   NCT       2 2006/95/EC   159 MECMA
                                low voltage energy cables -- Part 5: Halogen-free,
                                cross-linked insulating compounds

173 EN 50363-6:2005/A1:2011     Insulating, sheathing and covering materials for   NCT       2 2006/95/EC   159 MECMA
                                low voltage energy cables -- Part 6: Halogen-free,
                                cross-linked sheathing compounds

174 EN 50363-8:2005/A1:2011     Insulating, sheathing and covering materials for   NCT       2 2006/95/EC   159 MECMA
                                low voltage energy cables -- Part 8: Halogen-free,
                                thermoplastic sheathing compounds

175 EN 50395:2005/A1:2011       Electrical test methods for low voltage energy        NCT    2 2006/95/EC   159 MECMA
                                cables
176 EN 50396:2005/A1:2011       Non electrical test methods for low voltage           NCT    2 2006/95/EC   159 MECMA
                                energy cables
177 EN 50525-1:2011             Electric cables - Low voltage energy cables of        NCT   23 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (U0/U) -- Part 1: General requirements
178 EN 50525-2-11:2011          Electric cables - Low voltage energy cables of        NCT   10 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (Uo/U) -- Part 2-11: Cables for general
                                applications - Flexible cables with thermoplastic
                                PVC insulation
179 EN 50525-2-12:2011          Electric cables - Low voltage energy cables of        NCT    8 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (Uo/U) -- Part 2-12: Cables for general
                                applications - Cables with thermoplastic PVC
                                insulation for extensible leads
180 EN 50525-2-21:2011          Electric cables - Low voltage energy cables of        NCT   26 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (Uo/U) -- Part 2-21: Cables for general
                                applications - Flexible cables with crosslinked
                                elastomeric insulation
181 EN 50525-2-22:2011          Electric cables - Low voltage energy cables of        NCT    5 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (U0/U) -- Part 2-22: Cables for general
                                applications - High flexibility braided cables with
                                crosslinked elastomeric insulation
182 EN 50525-2-31:2011          Electric cables - Low voltage energy cables of        NCT    8 2006/95/EC   159 MECMA
                                rated voltages up to and including 450/750 V
                                (U0/U) -- Part 2-31: Cables for general
                                applications - Single core non-sheathed cables
                                with thermoplastic PVC insulation
183 EN 50525-2-41:2011   Electric cables - Low voltage energy cables of     NCT     7 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-41: Cables for general
                         applications - Single core cables with crosslinked
                         silicone rubber insulation
184 EN 50525-2-42:2011   Electric cables - Low voltage energy cables of      NCT    5 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-42: Cables for general
                         applications - Single core non-sheathed cables
                         with crosslinked EVA insulation
185 EN 50525-2-51:2011   Electric cables - Low voltage energy cables of      NCT   10 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-51: Cables for general
                         applications - Oil resistant control cables with
                         thermoplastic PVC insulation
186 EN 50525-2-71:2011   Electric cables - Low voltage energy cables of      NCT    4 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-71: Cables for general
                         applications - Flat tinsel cables (cords) with
                         thermoplastic PVC insulation
187 EN 50525-2-72:2011   Electric cables - Low voltage energy cables of      NCT    5 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-72: Cables for general
                         applications - Flat divisible cables (cords) with
                         thermoplastic PVC insulation
188 EN 50525-2-81:2011   Electric cables - Low voltage energy cables of     NCT     6 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-81: Cables for general
                         applications - Cables with crosslinked elastomeric
                         covering for arc welding
189 EN 50525-2-82:2011   Electric cables - Low voltage energy cables of     NCT     6 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-82: Cables for general
                         applications - Cables with crosslinked elastomeric
                         insulation for decorative chains
190 EN 50525-2-83:2011   Electric cables - Low voltage energy cables of      NCT    7 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 2-83: Cables for general
                         applications - Multicore cables with crosslinked
                         silicone rubber insulation
191 EN 50525-3-11:2011   Electric cables - Low voltage energy cables of      NCT    8 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 3-11: Cables with special fire
                         performance - Flexible cables with halogen-free
                         thermoplastic insulation, and low emission of
                         smoke
192 EN 50525-3-21:2011   Electric cables - Low voltage energy cables of      NCT    9 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 3-21: Cables with special fire
                         performance - Flexible cables with halogen-free
                         crosslinked insulation, and low emission of
                         smoke
193 EN 50525-3-31:2011   Electric cables - Low voltage energy cables of      NCT    8 2006/95/EC   159 MECMA
                         rated voltages up to and including 450/750 V
                         (U0/U) -- Part 3-31: Cables with special fire
                         performance - Single core non-sheathed cables
                         with halogen-free thermoplastic insulation, and
                         low emission of smoke
194 EN 50525-3-41:2011        Electric cables - Low voltage energy cables of        NCT     7 2006/95/EC   159 MECMA
                              rated voltages up to and including 450/750 V
                              (U0/U) -- Part 3-41: Cables with special fire
                              performance - Single core non-sheathed cables
                              with halogen-free crosslinked insulation, and low
                              emission of smoke
195 EN 62058-21:2010          Electricity metering equipment (a.c.) -               NCT    19 2004/22/EC   164 MECMA
                              Acceptance inspection -- Part 21: Particular
                              requirements for electromechanical meters for
                              active energy (classes 0,5, 1 and 2 and class
                              indexes A and B)
196 EN 62058-31:2010          Electricity metering equipment (a.c.) -           NCT        19 2004/22/EC   164 MECMA
                              Acceptance inspection -- Part 31: Particular
                              requirements for static meters for active energy
                              (classes 0,2 S, 0,5 S, 1 and 2, and class indexes
                              A, B and C)
197 HD 368 S1:1978            Direct acting recording electrical measuring      FCT        50 2006/95/EC   166 MECMA
                              instruments and their accessories
198 EN 61557-13:2011          Electrical safety in low voltage distribution     TR         15 2006/95/EC   166 MECMA
                              systems up to 1 000 V a.c. and 1 500 V d.c. -
                              Equipment for testing, measuring or monitoring of
                              protective measures -- Part 13: Hand-held and
                              hand-manipulated current clamps and sensors for
                              measurement of leakage currents in electrical
                              distribution systems


199 EN 13480-3:2002/A4:2010   Metallic industrial piping - Part 3: Design and       NCT    11 97/23/EC     169 MECMA
                              calculation
200 EN 13480-5:2002/A1:2011   Metallic industrial piping - Part 5: Inspection and   NCT     2 97/23/EC     169 MECMA
                              testing
201 EN 13480-8:2007/A1:2011   Metallic industrial piping - Part 8: Additional       NCT     3 97/23/EC     169 MECMA
                              requirements for aluminium and aluminium alloy
                              piping
202 EN 14917:2009+A1:2012     Metal bellows expansion joints for pressure      TR         115 97/23/EC     202 MECMA
                              applications
203 EN 3-8:2006/AC:2007       Portable fire extinguishers - Part 8: Additional NCT          1 97/23/EC     216 MECMA
                              requirements to EN 3-7 for the construction,
                              resistance to pressure and mechanical tests for
                              extinguishers with a maximum allowable pressure
                              equal to or lower than 30 bar
204 EN ISO 4413:2010          Hydraulic fluid power - General rules and safety      NCT    36 2006/42/EC   218 MECMA
                              requirements for systems and their components
                              (ISO 4413:2010)
205 EN ISO 4414:2010          Pneumatic fluid power - General rules and safety NCT         34 2006/42/EC   218 MECMA
                              requirements for systems and their components
                              (ISO 4414:2010)
206 EN 267:2009+A1:2011       Automatic forced draught burners for liquid fuels     NCT    68 97/23/EC     225 MECMA

207 EN 12952-2:2011           Water-tube boilers and auxiliary installations -    NCT      32 97/23/EC     225 MECMA
                              Part 2: Materials for pressure parts of boilers and
                              accessories
208 EN 12952-3:2011           Water-tube boilers and auxiliary installations -      NCT    87 97/23/EC     225 MECMA
                              Part 3: Design and calculation for pressure parts
                              of the boiler
209 EN 12952-5:2011           Water-tube boilers and auxiliary installations -      NCT    73 97/23/EC     225 MECMA
                              Part 5: Workmanship and construction of
                              pressure parts of the boiler
210 EN 12952-6:2011           Water-tube boilers and auxiliary installations -      NCT    34 97/23/EC     225 MECMA
                              Part 6: Inspection during construction;
                              documentation and marking of pressure parts of
                              the boiler
211 EN 12953-6:2011              Shell Boilers - Part 6: Requirements for           NCT   35 97/23/EC      225 MECMA
                                 equipment for the boiler
212 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    2:2003/A11:2010/AC:2012      Safety -- Part 2-2: Particular requirements for
                                 vacuum cleaners and water-suction cleaning
                                 appliances
215 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    3:2002/A11:2010/AC:2012      Safety -- Part 2-3: Particular requirements for
                                 electric irons
219 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    6:2003/A11:2010/AC:2012      Safety -- Part 2-6: Particular requirements for
                                 stationary cooking ranges, hobs, ovens and
                                 similar appliances
220 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    9:2003/A13:2010/AC:2012      Safety -- Part 2-9: Particular requirements for
                                 grills, toasters and similar portable cooking
                                 appliances
213 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    23:2003/A11:2010/AC:2012     Safety -- Part 2-23: Particular requirements for
                                 appliances for skin or hair care
214 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    25:2002/A11:2010/AC:2012     Safety -- Part 2-25: Particular requirements for
                                 microwave ovens, including combination
                                 microwave ovens
216 EN 60335-2-35:2002/A2:2011   Household and similar electrical appliances -      NCT    5 2006/95/EC    239 MECMA
                                 Safety -- Part 2-35: Particular requirements for
                                 instantaneous water heaters
217 EN 60335-2-                  Household and similar electrical appliances -      TR     1 2006/95/EC    239 MECMA
    52:2003/A11:2010/AC:2012     Safety -- Part 2-52: Particular requirements for
                                 oral hygiene appliances
218 EN 60335-2-53:2011           Household and similar electrical appliances -      TR    28 2006/95/EC    239 MECMA
                                 Safety -- Part 2-53: Particular requirements for
                                 sauna heating appliances and infrared cabins

221 EN 62115:2005/A2:2011        Electric toys - Safety                           NCT     14 2009/48/EC    239 MECMA
222 EN 13430:2004                Packaging - Requirements for packaging           FCT     16 94/62/EC      270 MECMA
                                 recoverable by material recycling
223 EN 62311:2008                Assessment of electronic and electrical          NCT     59 2006/95/EC    279 MECMA
                                 equipment related to human exposure restrictions
                                 for electromagnetic fields (0 Hz - 300 GHz)

224 EN 30-1-                     Domestic cooking appliances burning gas - Part 1- TR      4 2009/142/EC   305 MECMA
    1:2008+A2:2010/AC:2011       1: Safety - General
225 EN 1106:2010                 Manually operated taps for gas burning            NCT    14 2009/142/EC   305 MECMA
                                 appliances
226 EN 1854:2010                 Pressure sensing devices for gas burners and      NCT    25 2009/142/EC   305 MECMA
                                 gas burning appliances
227 EN 61558-1:2005/A1:2009      Safety of power transformers, power supplies,     NCT     2 2006/95/EC    312 MECMA
                                 reactors and similar products -- Part 1: General
                                 requirements and tests
228 EN 61558-2-1:2007            Safety of power transformers, power supplies,      NCT   11 2006/95/EC    312 MECMA
                                 reactors and similar products -- Part 2-1:
                                 Particular requirements and tests for separating
                                 transformers and power supplies incorporating
                                 separating transformers for general applications


231 EN 61558-2-2:2007            Safety of power transformers, power supplies,      NCT   13 2006/95/EC    312 MECMA
                                 reactors and similar products -- Part 2-2:
                                 Particular requirements and tests for control
                                 transformers and power supplies incorporating
                                 control transformers
234 EN 61558-2-3:2010          Safety of transformers, reactors, power supply      NCT   16 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-3:
                               Particular requirements and tests for ignition
                               transformers for gas and oil burners
235 EN 61558-2-5:2010          Safety of transformers, reactors, power supply    NCT     16 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-5:
                               Particular requirements and tests for transformer
                               for shavers, power supply units for shavers and
                               shaver supply units
236 EN 61558-2-7:2007          Safety of power transformers, power supplies,      NCT    15 2006/95/EC   312 MECMA
                               reactors and similar products -- Part 2-7:
                               Particular requirements and tests for transformers
                               and power supplies for toys

237 EN 61558-2-8:2010          Safety of transformers, reactors, power supply     NCT    15 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-8:
                               Particular requirements and tests for transformers
                               and power supply units for bells and chimes

238 EN 61558-2-9:2011          Safety of transformers, reactors, power supply     NCT    14 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-9:
                               Particular requirements and tests for transformers
                               and power supply units for class III handlamps for
                               tungsten filament lamps


229 EN 61558-2-12:2011         Safety of transformers, reactors, power supply      NCT   21 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-12:
                               Particular requirements and tests for constant
                               voltage transformers and power supply units for
                               constant voltage
230 EN 61558-2-16:2009         Safety of transformers, reactors, power supply    NCT     33 2006/95/EC   312 MECMA
                               units and similar products for supply voltages up
                               to 1 100 V -- Part 2-16: Particular requirements
                               and tests for switch mode power supply units and
                               transformers for switch mode power supply units


232 EN 61558-2-20:2011         Safety of transformers, reactors, power supply      NCT   17 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-20:
                               Particular requirements and tests for small
                               reactors
233 EN 61558-2-23:2010         Safety of transformers, reactors, power supply     NCT    19 2006/95/EC   312 MECMA
                               units and combinations thereof -- Part 2-23:
                               Particular requirements and tests for transformers
                               and power supply units for construction sites

239 EN ISO 14065:2012          Greenhouse gases - Requirements for               TR      29 765/2008     323 MECMA
                               greenhouse gas validation and verification bodies
                               for use in accreditation or other forms of
                               recognition
240 EN 61851-1:2011            Electric vehicle conductive charging system --      NCT   47 2006/95/EC   333 MECMA
                               Part 1: General requirements
241 EN 60065:2002/A12:2011     Audio, video and similar electronic apparatus -     NCT    6 2006/95/EC   368 MECMA
                               Safety requirements
242 EN 60950-1:2006/A12:2011   Information technology equipment - Safety -- Part   NCT    6 2006/95/EC   368 MECMA
                               1: General requirements
243 EN ISO 15195:2003          Laboratory medicine - Requirements for              FCT   19 765/2008     377 MECMA
                               reference measurement laboratories (ISO
                               15195:2003)
244 EN ISO 22870:2006          Point-of-care testing (POCT) - Requirements for     NCT   13 765/2008     377 MECMA
                               quality and competence (ISO 22870:2006)
245 EN ISO 10218-1:2011       Robots and robotic devices - Safety requirements NCT           34 2006/42/EC   23 MMFPS
                              for industrial robots - Part 1: Robots (ISO 10218-
                              1:2011)
246 EN ISO 10218-2:2011       Robots and robotic devices - Safety requirements NCT           56 2006/42/EC   23 MMFPS
                              for industrial robots - Part 2: Robot systems and
                              integration (ISO 10218-2:2011)

247 EN 60204-32:2008          Safety of machinery - Electrical equipment of           NCT   144 2006/42/EC   23 MMFPS
                              machines -- Part 32: Requirements for hoisting
                              machines
248 EN 894-4:2010             Safety of machinery - Ergonomics requirements NCT              37 2006/42/EC   54 MMFPS
                              for the design of displays and control actuators -
                              Part 4: Location and arrangement of displays and
                              control actuators

249 EN 836:1997+A4:2011       Garden equipment - Powered lawnmowers -              TR        74 2006/42/EC   77 MMFPS
                              Safety
250 EN 617:2001+A1:2010       Continuous handling equipment and systems -          NCT       40 2006/42/EC   84 MMFPS
                              Safety and EMC requirements for the equipment
                              for the storage of bulk materials in silos, bunkers,
                              bins and hoppers
251 EN 618:2002+A1:2010       Continuous handling equipment and systems -             NCT    44 2006/42/EC   84 MMFPS
                              Safety and EMC requirements for equipment for
                              mechanical handling of bulk materials except
                              fixed belt conveyors
252 EN 619:2002+A1:2010       Continuous handling equipment and systems -             NCT    58 2006/42/EC   84 MMFPS
                              Safety and EMC requirements for equipment for
                              mechanical handling of unit loads
253 EN 620:2002+A1:2010       Continuous handling equipment and systems -             NCT    45 2006/42/EC   84 MMFPS
                              Safety and EMC requirements for fixed belt
                              conveyors for bulk materials
254 EN 741:2000+A1:2010       Continuous handling equipment and systems -             NCT    25 2006/42/EC   84 MMFPS
                              Safety requirements for systems and their
                              components for pneumatic handling of bulk
                              materials
255 EN 1175-1:1998+A1:2010    Safety of industrial trucks - Electrical                NCT    39 2006/42/EC   85 MMFPS
                              requirements - Part 1: General requirements for
                              battery powered trucks
256 EN 1175-3:1998+A1:2010    Safety of industrial trucks - Electrical                NCT    16 2006/42/EC   85 MMFPS
                              requirements - Part 3: Specific requirements for
                              the electric power transmission systems of
                              internal combustion engine powered trucks

257 EN 1459:1998+A3:2012      Safety of industrial trucks - Self-propelled variable   TR     59 2006/42/EC   85 MMFPS
                              reach trucks
258 EN 13001-2:2011           Crane safety - General design - Part 2: Load            NCT    34 2006/42/EC   85 MMFPS
                              actions
259 EN 13001-2:2011/AC:2012   Crane safety - General design - Part 2: Load            TR      1 2006/42/EC   85 MMFPS
                              actions
260 EN 13001-3-1:2012         Cranes - General Design - Part 3-1: Limit States        NCT    58 2006/42/EC   85 MMFPS
                              and proof competence of steel structure

261 EN 14985:2012             Cranes - Slewing jib cranes                             TR     47 2006/42/EC    85 MMFPS
262 EN 860:2007+A2:2012       Safety of woodworking machines - One side               TR     37 2006/42/EC   118 MMFPS
                              thickness planing machines
263 EN 861:2007+A2:2012       Safety of woodworking machines - Surface                TR     48 2006/42/EC   118 MMFPS
                              planing and thicknessing machines
267 EN 1870-4:2012            Safety of woodworking machines - Circular               NCT    56 2006/42/EC   118 MMFPS
                              sawing machines - Part 4: Multiblade rip sawing
                              machines with manual loading and/or unloading
268 EN 1870-5:2002+A2:2012    Safety of woodworking machines - Circular             TR    42 2006/42/EC   118 MMFPS
                              sawing machines - Part 5: Circular
                              sawbenches/up-cutting cross-cut sawing
                              machines
264 EN 1870-11:2003+A1:2009   Safety of woodworking machines - Circular             NCT   38 2006/42/EC   118 MMFPS
                              sawing machines - Part 11: Semi-automatic and
                              automatic horizontal cross-cut sawing machines
                              with one saw unit (radial arm saws)

265 EN 1870-13:2007+A2:2012   Safety of woodworking machines - Circular             NCT   56 2006/42/EC   118 MMFPS
                              sawing machines - Part 13: Horizontal beam
                              panel sawing machines
266 EN 1870-14:2007+A2:2012   Safety of woodworking machines - Circular        NCT        47 2006/42/EC   118 MMFPS
                              sawing machines - Part 14: Vertical panel sawing
                              machines
278 EN 60079-5:2007           Explosive atmospheres -- Part 5: Equipment            NCT   22 94/9/EC      137 MMFPS
                              protection by powder filling "q"
279 EN 60079-6:2007           Explosive atmospheres -- Part 6: Equipment            NCT   18 94/9/EC      137 MMFPS
                              protection by oil immersion "o"
269 EN 60079-15:2010          Explosive atmospheres -- Part 15: Equipment           NCT   83 94/9/EC      137 MMFPS
                              protection by type of protection "n"
270 EN 60079-20-1:2010        Explosive atmospheres -- Part 20-1: Material          NCT   43 94/9/EC      137 MMFPS
                              characteristics for gas and vapour classification -
                              Test methods and data
271 EN 60079-25:2010          Explosive atmospheres -- Part 25: Intrinsically       NCT   53 94/9/EC      137 MMFPS
                              safe electrical systems
272 EN 60079-26:2007          Explosive atmospheres -- Part 26: Equipment           NCT   25 94/9/EC      137 MMFPS
                              with equipment protection level (EPL) Ga
273 EN 60079-28:2007          Explosive atmospheres -- Part 28: Protection of       NCT   31 94/9/EC      137 MMFPS
                              equipment and transmission systems using
                              optical radiation
274 EN 60079-29-1:2007        Explosive atmospheres -- Part 29-1: Gas               NCT   52 94/9/EC      137 MMFPS
                              detectors - Performance requirements of
                              detectors for flammable gases
275 EN 60079-29-4:2010        Explosive atmospheres -- Part 29-4: Gas               NCT   42 94/9/EC      137 MMFPS
                              detectors - Performance requirements of open
                              path detectors for flammable gases
276 EN 60079-30-1:2007        Explosive atmospheres -- Part 30-1: Electrical        NCT   26 94/9/EC      137 MMFPS
                              resistance trace heating - General and testing
                              requirements
277 EN 60079-35-1:2011        Explosive atmospheres -- Part 35-1: Caplights for NCT       22 94/9/EC      137 MMFPS
                              use in mines susceptible to firedamp - General
                              requirements - Construction and testing in
                              relation to the risk of explosion

280 EN 14655:2005+A1:2010     Food processing machinery - Baguette slicers -   NCT        20 2006/42/EC   148 MMFPS
                              Safety and hygiene requirements
281 EN 13012:2012             Petrol filling stations - Construction and       TR         15 94/9/EC      169 MMFPS
                              performance of automatic nozzles for use on fuel
                              dispensers
282 EN 13617-1:2012           Petrol filling stations - Part 1: Safety requirements TR    39 2006/42/EC   169 MMFPS
                              for construction and performance of metering
                              pumps, dispensers and remote pumping units

283 EN 13617-2:2012           Petrol filling stations - Part 2: Safety requirements TR    15 94/9/EC      169 MMFPS
                              for construction and performance of safe breaks
                              for use on metering pumps and dispensers

284 EN 13617-3:2012           Petrol filling stations - Part 3: Safety requirements TR    13 94/9/EC      169 MMFPS
                              for construction and performance of shear valves
285 EN 15268:2008                 Petrol filling stations - Safety requirements for the NCT   25 2006/42/EC   169 MMFPS
                                  construction of submersible pump assemblies

286 EN 50286:1999/AC:2004         Electrical insulating protective clothing for low- TR        1 89/686/EEC   176 MMFPS
                                  voltage installations
287 EN 60743:2001/A1:2008         Live working - Terminology for tools, equipment NCT          5 89/686/EEC   176 MMFPS
                                  and devices
288 EN 1777:2010                  Hydraulic platforms (HPs) for fire fighting and    NCT      72 2006/42/EC   216 MMFPS
                                  rescue services - Safety requirements and testing

289 EN 1846-2:2009                Firefighting and rescue service vehicles - Part 2: NCT      46 2006/42/EC   216 MMFPS
                                  Common requirements - Safety and performance

290 EN 13204:2004+A1:2012         Double acting hydraulic rescue tools for fire and    TR     43 2006/42/EC   216 MMFPS
                                  rescue service use - Safety and performance
                                  requirements
291 EN 14466:2005+A1:2008         Fire-fighting pumps - Portable pumps - Safety        NCT    30 2006/42/EC   216 MMFPS
                                  and performance requirements, tests
292 EN 474-4:2006+A2:2012         Earth-moving machinery - Safety - Part 4:            NCT    15 2006/42/EC   218 MMFPS
                                  Requirements for backhoe loaders
293 EN 474-5:2006+A2:2012         Earth-moving machinery - Safety - Part 5:            NCT    17 2006/42/EC   218 MMFPS
                                  Requirements for hydraulic excavators
294 EN 207:2009/AC:2011           Personal eye-protection equipment - Filters and      TR      1 89/686/EEC   227 MMFPS
                                  eye-protectors against laser radiation (laser eye-
                                  protectors)
295 EN 12254:2010/AC:2011         Screens for laser working places - Safety            TR      1 2006/42/EC   227 MMFPS
                                  requirements and testing
296 EN ISO 12402-2:2006/A1:2010   Personal flotation devices - Part 2: Lifejackets,    NCT     4 89/686/EEC   227 MMFPS
                                  performance level 275 - Safety requirements -
                                  Amendment 1 (ISO 12402-2:2006/Amd 1:2010)

297 EN ISO 12402-3:2006/A1:2010   Personal flotation devices - Part 3: Lifejackets,    NCT     4 89/686/EEC   227 MMFPS
                                  performance level 150 - Safety requirements -
                                  Amendment 1 (ISO 12402-3:2006/Amd 1:2010)

298 EN ISO 12402-4:2006/A1:2010   Personal flotation devices - Part 4: Lifejackets,    NCT     4 89/686/EEC   227 MMFPS
                                  performance level 100 - Safety requirements -
                                  Amendment 1 (ISO 12402-4:2006/Amd 1:2010)

299 EN ISO 12402-5:2006/A1:2010   Personal flotation devices - Part 5: Buoyancy aids NCT       4 89/686/EEC   227 MMFPS
                                  (level 50) - Safety requirements - Amendment 1
                                  (ISO 12402-5:2006/Amd 1:2010)

300 EN ISO 12402-6:2006/A1:2010   Personal flotation devices - Part 6: Special         NCT     4 89/686/EEC   227 MMFPS
                                  purpose lifejackets and buoyancy aids - Safety
                                  requirements and additional test methods -
                                  Amendment 1 (ISO 12402-6:2006/Amd 1:2010)

301 EN ISO 12402-8:2006/A1:2011   Personal flotation devices - Part 8: Accessories - NCT       7 89/686/EEC   227 MMFPS
                                  Safety requirements and test methods -
                                  Amendment 1 (ISO 12402-8:2006/Amd 1:2011)

302 EN ISO 12402-9:2006/A1:2011   Personal flotation devices - Part 9: Test methods - NCT     10 89/686/EEC   227 MMFPS
                                  Amendment 1 (ISO 12402-9:2006/Amd 1:2011)

303 EN 15333-1:2008               Respiratory equipment - Open-circuit umbilical  NCT         41 89/686/EEC   227 MMFPS
                                  supplied compressed gas diving apparatus - Part
                                  1: Demand apparatus
304 EN 15333-1:2008/AC:2009       Respiratory equipment - Open-circuit umbilical  NCT          1 89/686/EEC   227 MMFPS
                                  supplied compressed gas diving apparatus - Part
                                  1: Demand apparatus
305 EN 15333-2:2009       Respiratory equipment - Open-circuit umbilical  NCT         40 89/686/EEC   227 MMFPS
                          supplied compressed gas diving apparatus - Part
                          2: Free flow apparatus
306 EN 16027:2011         Protective clothing - Gloves with protective effect NCT     11 89/686/EEC   227 MMFPS
                          for association football goal keepers
307 EN ISO 17491-3:2008   Protective clothing - Test methods for clothing     NCT     10 89/686/EEC   227 MMFPS
                          providing protection against chemicals - Part 3:
                          Determination of resistance to penetration by a
                          jet of liquid (jet test) (ISO 17491-3:2008)

308 EN ISO 17491-4:2008   Protective clothing - Test methods for clothing       NCT   11 89/686/EEC   227 MMFPS
                          providing protection against chemicals - Part 4:
                          Determination of resistance to penetration by a
                          spray of liquid (spray test) (ISO 17491-4:2008)

309 EN ISO 20344:2011     Personal protective equipment - Test methods for      TR    60 89/686/EEC   227 MMFPS
                          footwear (ISO 20344:2011)
310 EN ISO 20345:2011     Personal protective equipment - Safety footwear       TR    25 89/686/EEC   227 MMFPS
                          (ISO 20345:2011)
311 EN ISO 20347:2012     Personal protective equipment - Occupational          TR    24 89/686/EEC   227 MMFPS
                          footwear (ISO 20347:2012)
312 EN ISO 20349:2010     Personal protective equipment - Footwear              NCT   13 89/686/EEC   227 MMFPS
                          protecting against thermal risks and molten metal
                          splashes as found in foundries and welding -
                          Requirements and test method (ISO 20349:2010)

313 EN ISO 3741:2010      Acoustics - Determination of sound power levels       NCT   69 2006/42/EC   274 MMFPS
                          and sound energy levels of noise sources using
                          sound pressure - Precision methods for
                          reverberation test rooms (ISO 3741:2010)

314 EN ISO 3743-1:2010    Acoustics - Determination of sound power levels       NCT   45 2006/42/EC   274 MMFPS
                          and sound energy levels of noise sources using
                          sound pressure - Engineering methods for small
                          movable sources in reverberant fields - Part 1:
                          Comparison method for a hard-walled test room
                          (ISO 3743-1:2010)


315 EN ISO 3744:2010      Acoustics - Determination of sound power levels       NCT   74 2006/42/EC   274 MMFPS
                          and sound energy levels of noise sources using
                          sound pressure - Engineering methods for an
                          essentially free field over a reflecting plane (ISO
                          3744:2010)
316 EN ISO 3746:2010      Acoustics - Determination of sound power levels       NCT   47 2006/42/EC   274 MMFPS
                          and sound energy levels of noise sources using
                          sound pressure - Survey method using an
                          enveloping measurement surface over a
                          reflecting plane (ISO 3746:2010)


317 EN ISO 3747:2010      Acoustics - Determination of sound power levels NCT         50 2006/42/EC   274 MMFPS
                          and sound energy levels of noise sources using
                          sound pressure - Engineering/survey methods for
                          use in situ in a reverberant environment (ISO
                          3747:2010)
318 EN ISO 4869-3:2007    Acoustics - Hearing protectors - Part 3:              NCT   13 89/686/EEC   274 MMFPS
                          Measurement of insertion loss of ear-muff type
                          protectors using an acoustic test fixture (ISO
                          4869-3:2007)
319 EN ISO 11201:2010         Acoustics - Noise emitted by machinery and            NCT   46 2006/42/EC   274 MMFPS
                              equipment - Determination of emission sound
                              pressure levels at a work station and at other
                              specified positions in an essentially free field over
                              a reflecting plane with negligible environmental
                              corrections (ISO 11201:2010)


320 EN ISO 11202:2010         Acoustics - Noise emitted by machinery and          NCT     51 2006/42/EC   274 MMFPS
                              equipment - Determination of emission sound
                              pressure levels at a work station and at other
                              specified positions applying approximate
                              environmental corrections (ISO 11202:2010)


321 EN ISO 11204:2010         Acoustics - Noise emitted by machinery and          NCT     46 2006/42/EC   274 MMFPS
                              equipment - Determination of emission sound
                              pressure levels at a work station and at other
                              specified positions applying accurate
                              environmental corrections (ISO 11204:2010)
322 EN ISO 28927-2:2009       Hand-held portable power tools - Test methods       NCT     24 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 2:
                              Wrenches, nutrunners and screwdrivers (ISO
                              28927-2:2009)
323 EN ISO 28927-3:2009       Hand-held portable power tools - Test methods       NCT     19 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 3:
                              Polishers and rotary, orbital and random orbital
                              sanders (ISO 28927-3:2009)
324 EN ISO 28927-5:2009       Hand-held portable power tools - Test methods         NCT   19 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 5: Drills
                              and impact drills (ISO 28927-5:2009)

325 EN ISO 28927-6:2009       Hand-held portable power tools - Test methods       NCT     16 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 6:
                              Rammers (ISO 28927-6:2009)
326 EN ISO 28927-7:2009       Hand-held portable power tools - Test methods       NCT     17 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 7:
                              Nibblers and shears (ISO 28927-7:2009)

327 EN ISO 28927-8:2009       Hand-held portable power tools - Test methods       NCT     20 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 8:
                              Saws, polishing and filing machines with
                              reciprocating action and saws with oscillating or
                              rotating action (ISO 28927-8:2009)


328 EN ISO 28927-9:2009       Hand-held portable power tools - Test methods  NCT          18 2006/42/EC   274 MMFPS
                              for evaluation of vibration emission - Part 9:
                              Scaling hammers and needle scalers (ISO 28927-
                              9:2009)
329 EN 30326-1:1994/A2:2011   Mechanical vibration - Laboratory method for        TR      10 2006/42/EC   274 MMFPS
                              evaluating vehicle seat vibration - Part 1: Basic
                              requirements - Amendment 2 (ISO 10326-
                              1:1992/Amd 2:2011)
330 EN 12978:2003+A1:2009     Industrial, commercial and garage doors and         NCT     28 2006/42/EC   318 MMFPS
                              gates - Safety devices for power operated doors
                              and gates - Requirements and test methods

331 EN ISO 11810-1:2009       Lasers and laser-related equipment - Test          NCT      12 93/42/EEC    230 MS
                              method and classification for the laser resistance
                              of surgical drapes and/or patient protective
                              covers - Part 1: Primary ignition and penetration
                              (ISO 11810-1:2005)
332 EN ISO 11810-2:2009         Lasers and laser-related equipment - Test          NCT      13 93/42/EEC    230 MS
                                method and classification for the laser-resistance
                                of surgical drapes and/or patient-protective
                                covers - Part 2: Secondary ignition (ISO 11810-
                                2:2007)
333 EN ISO 15004-1:2009         Ophthalmic instruments - Fundamental            NCT         11 93/42/EEC    230 MS
                                requirements and test methods - Part 1: General
                                requirements applicable to all ophthalmic
                                instruments (ISO 15004-1:2006)
334 EN 1642:2011                Dentistry - Medical devices for dentistry - Dental   TR      9 93/42/EEC    377 MS
                                implants
335 EN 1865-2:2010              Patient handling equipment used in road              NCT     8 2007/47/EC   377 MS
                                ambulances - Part 2: Power assisted stretcher

336 EN ISO 13408-2:2011         Aseptic processing of health care products - Part NCT       15 93/42/EEC    377 MS
                                2: Filtration (ISO 13408-2:2003)
337 EN ISO 13485:2012           Medical devices - Quality management systems - NCT          89 93/42/EEC    377 MS
                                Requirements for regulatory purposes (ISO
                                13485:2003)
338 EN ISO 13485:2012/AC:2012   Medical devices - Quality management systems - TR            2 93/42/EEC    377 MS
                                Requirements for regulatory purposes - Technical
                                Corrigendum 1 (ISO 13485:2003+Cor 1:2009)

339 EN 13976-1:2011             Rescue systems - Transportation of incubators -      NCT     8 93/42/EEC    377 MS
                                Part 1: Interface conditions
340 EN 13976-2:2011             Rescue systems - Transportation of incubators -      NCT     9 93/42/EEC    377 MS
                                Part 2: System requirements
341 EN ISO 14155:2011           Clinical investigation of medical devices for        NCT    65 93/42/EEC    377 MS
                                human subjects - Good clinical practice (ISO
                                14155:2011)
342 EN ISO 14602:2011           Non-active surgical implants - Implants for          NCT    14 93/42/EEC    377 MS
                                osteosynthesis - Particular requirements (ISO
                                14602:2010)
343 EN ISO 14630:2009           Non-active surgical implants - General         NCT          20 93/42/EEC    377 MS
                                requirements (ISO 14630:2008)
344 EN 14683:2005               Surgical masks - Requirements and test methods NCT          10 93/42/EEC    377 MS

345 EN 14820:2004               Single-use containers for human venous blood     NCT        15 98/79/EC     377 MS
                                specimen collection
346 EN ISO 14971:2012           Medical devices - Application of risk management TR        116 93/42/EEC    377 MS
                                to medical devices (ISO 14971:2007, Corrected
                                version 2007-10-01)
347 EN ISO 18113-1:2011         In vitro diagnostic medical devices - Information TR        68 98/79/EC     377 MS
                                supplied by the manufacturer (labelling) - Part 1:
                                Terms, definitions and general requirements (ISO
                                18113-1:2009)
348 EN ISO 18113-2:2011         In vitro diagnostic medical devices - Information    TR     15 98/79/EC     377 MS
                                supplied by the manufacturer (labelling) - Part 2:
                                In vitro diagnostic reagents for professional use
                                (ISO 18113-2:2009)

349 EN ISO 18113-3:2011         In vitro diagnostic medical devices - Information    TR     12 98/79/EC     377 MS
                                supplied by the manufacturer (labelling) - Part 3:
                                In vitro diagnostic instruments for professional
                                use (ISO 18113-3:2009)

350 EN ISO 18113-4:2011         In vitro diagnostic medical devices - Information    TR     14 98/79/EC     377 MS
                                supplied by the manufacturer (labelling) - Part 4:
                                In vitro diagnostic reagents for self-testing (ISO
                                18113-4:2009)
351 EN ISO 18113-5:2011       In vitro diagnostic medical devices - Information        TR    11 98/79/EC     377 MS
                              supplied by the manufacturer (labelling) - Part 5:
                              In vitro diagnostic instruments for self-testing
                              (ISO 18113-5:2009)

352 EN 50122-1:2011/AC:2012   Railway applications - Fixed installations -          TR        1 2008/57/EC     4 MTI
                              Electrical safety, earthing and the return circuit --
                              Part 1: Protective provisions against electric
                              shock
353 EN 50317:2012             Railway applications - Current collection systems - TR         12 2008/57/EC     4 MTI
                              Requirements for and validation of
                              measurements of the dynamic interaction
                              between pantograph and overhead contact line

354 EN 50467:2011             Railway applications - Rolling stock - Electrical        TR    39 2008/57/EC     4 MTI
                              connectors, requirements and test methods

355 EN 50553:2012             Railway applications - Requirements for running          TR    34 2008/57/EC     4 MTI
                              capability in case of fire on board of rolling stock

356 EN 12080:2007+A1:2010     Railway applications - Axleboxes - Rolling               NCT   22 2008/57/EC   146 MTI
                              bearings
357 EN 12081:2007+A1:2010     Railway applications - Axleboxes - Lubricating           NCT   12 2008/57/EC   146 MTI
                              greases
358 EN 12082:2007+A1:2010     Railway applications - Axleboxes - Performance           NCT   19 2008/57/EC   146 MTI
                              testing
359 EN 13145:2001+A1:2011     Railway applications - Track - Wood sleepers and         NCT   12 2008/57/EC   146 MTI
                              bearers
360 EN 13146-9:2009+A1:2011   Railway applications - Track - Test methods for          NCT   19 2008/57/EC   146 MTI
                              fastening systems - Part 9: Determination of
                              stiffness
361 EN 13232-2:2003+A1:2011   Railway applications - Track - Switches and              NCT   11 2008/57/EC   146 MTI
                              crossings - Part 2: Requirements for geometric
                              design
362 EN 13232-3:2003+A1:2011   Railway applications - Track - Switches and              NCT   11 2008/57/EC   146 MTI
                              crossings - Part 3: Requirements for wheel/rail
                              interaction
363 EN 13232-4:2005+A1:2011   Railway applications - Track - Switches and              NCT   14 2008/57/EC   146 MTI
                              crossings - Part 4: Actuation, locking and
                              detection
364 EN 13232-5:2005+A1:2011   Railway applications - Track - Switches and              NCT   15 2008/57/EC   146 MTI
                              crossings - Part 5: Switches
365 EN 13232-6:2005+A1:2011   Railway applications - Track - Switches and              NCT   16 2008/57/EC   146 MTI
                              crossings - Part 6: Fixed common and obtuse
                              crossings
366 EN 13232-7:2006+A1:2011   Railway applications - Track - Switches and       NCT          29 2008/57/EC   146 MTI
                              crossings - Part 7: Crossings with moveable parts

367 EN 13232-8:2007+A1:2011   Railway applications - Track - Switches and              NCT   15 2008/57/EC   146 MTI
                              crossings - Part 8: Expansion devices
368 EN 13232-9:2006+A1:2011   Railway applications - Track - Switches and              NCT   33 2008/57/EC   146 MTI
                              crossings - Part 9: Layouts
369 EN 13272:2012             Railway applications - Electrical lighting for rolling   NCT   19 2008/57/EC   146 MTI
                              stock in public transport systems
370 EN 13674-2:2006+A1:2010   Railway applications - Track - Rail - Part 2:            NCT   34 2008/57/EC   146 MTI
                              Switch and crossing rails used in conjunction with
                              Vignole railway rails 46 kg/m and above

371 EN 13674-3:2006+A1:2010   Railway applications - Track - Rail - Part 3: Check NCT         9 2008/57/EC   146 MTI
                              rails
372 EN 13715:2006+A1:2010     Railway applications - Wheelsets and bogies -       NCT        15 2008/57/EC   146 MTI
                              Wheels - Tread profile
373 EN 13848-4:2011           Railway applications - Track - Track geometry    NCT        19 2008/57/EC   146 MTI
                              quality - Part 4: Measuring systems - Manual and
                              lightweight devices
374 EN 13848-5:2008+A1:2010   Railway applications - Track - Track geometry         NCT   16 2008/57/EC   146 MTI
                              quality - Part 5: Geometric quality levels - Plain
                              line
375 EN 13979-1:2003+A2:2011   Railway applications - Wheelsets and bogies -    NCT        34 2008/57/EC   146 MTI
                              Monobloc wheels - Technical approval procedure -
                              Part 1: Forged and rolled wheels
376 EN 14033-1:2011           Railway applications - Track - Railbound        NCT         58 2008/57/EC   146 MTI
                              construction and maintenance machines - Part 1:
                              Technical requirements for running
377 EN 14535-1:2005+A1:2011   Railway applications - Brake discs for railway        NCT   17 2008/57/EC   146 MTI
                              rolling stock - Part 1: Brake discs pressed or
                              shrunk onto the axle or drive shaft, dimensions
                              and quality requirements
378 EN 14535-2:2011           Railway applications - Brake discs for railway        NCT   20 2008/57/EC   146 MTI
                              rolling stock - Part 2: Brake discs mounted onto
                              the wheel, dimensions and quality requirements

379 EN 14601:2005+A1:2010     Railway applications - Straight and angled end        NCT   20 2008/57/EC   146 MTI
                              cocks for brake pipe and main reservoir pipe

380 EN 15220-1:2008+A1:2011   Railway applications - Brake indicators - Part 1:     NCT   20 2008/57/EC   146 MTI
                              Pneumatically operated brake indicators
381 EN 15302:2008+A1:2010     Railway applications - Method for determining the     NCT   60 2008/57/EC   146 MTI
                              equivalent conicity
382 EN 15355:2008+A1:2010     Railway applications - Braking - Distributor valves   NCT   45 2008/57/EC   146 MTI
                              and distributor-isolating devices
383 EN 15437-1:2009           Railway applications - Axlebox condition              NCT   19 2008/57/EC   146 MTI
                              monitoring - Interface and design requirements -
                              Part 1: Track side equipment and rolling stock
                              axlebox
384 EN 15595:2009+A1:2011     Railway applications - Braking - Wheel slide      NCT       54 2008/57/EC   146 MTI
                              protection
385 EN 15611:2008+A1:2010     Railway applications - Braking - Relay valves     NCT       47 2008/57/EC   146 MTI
386 EN 15746-1:2010+A1:2011   Railway applications - Track - Road-rail machines NCT       61 2008/57/EC   146 MTI
                              and associated equipment - Part 1: Technical
                              requirements for running and working

387 EN 12665:2011             Light and lighting - Basic terms and criteria for     NCT   41 2008/57/EC   240 MTI
                              specifying lighting requirements
                                               SECTIUNEA 3, CAPITOLUL 1

                         Proiectele de standarde europene CEN-CENELEC cu faze
                                              de vot in 2012

Nr
           CT   NrSR            Indicativ EN                               Titlu                               Faza   Minister
crt
       1   95    4833 prEN ISO 4833-1          Microbiology of food and animal feed - Horizontal method for    4020 MADR
                                               the enumeration of microorganisms - Part 1: Colony count at
                                               30 degrees C by the pour plate technique (ISO/DIS 4833-
                                               1:2012)
       2   95    4833 prEN ISO 4833-2          Microbiology of food and animal feed - Horizontal method for 4020 MADR
                                               the enumeration of microorganisms - Part 2: Colony count at
                                               30 degrees C by the surface plating technique (ISO/DIS 4833-
                                               2:2012)
       3   95    6498 EN ISO 6498:2012         Animal feeding stuffs - Guidelines for sample preparation       5020 MADR
                                               (ISO 6498:2012)
       4   95    6579 FprCEN ISO/TS 6579-2     Microbiology of the food chain - Horizontal method for the      5020 MADR
                                               detection, enumeration and serotyping of Salmonella - Part
                                               2: Enumeration by a miniaturized MPN technique

       5   95    7218 EN ISO 7218:2007/prA1    Microbiology of food and animal feeding stuffs - General     4020 MADR
                                               requirements and guidance for microbiological examinations -
                                               Amendment 1 (ISO 7218:2007/DAM 1:2011)

       6   95 12393 prEN 12393-2               Foods of plant origin - Multiresidue methods for the            4020 MADR
                                               determination of pesticide residues by GC or LC-MS/MS -
                                               Part 2: Methods for extraction and clean-up
       7   95 12393 prEN 12393-3               Foods of plant origin - Multiresidue methods for the            4020 MADR
                                               determination of pesticide residues by GC or LC-MS/MS -
                                               Part 3: Determination and confirmatory tests
       8   95 12822 prEN 12822                 Foodstuffs - Determination of vitamin E by high performance     4020 MADR
                                               liquid chromatography - Measurement of ?-, ß-, ?- and ?-
                                               tocopherols
       9   95 12823 prEN 12823-1               Foodstuffs - Determination of vitamin A by high performance     4020 MADR
                                               liquid chromatography - Part 1: Measurement of all-trans-
                                               retinol and 13-cis-retinol
      10   95 13136 FprCEN ISO/TS 13136        Microbiology of food and animal feed - Real-time polymerase 5020 MADR
                                               chain reaction (PCR)-based method for the detection of food-
                                               borne pathogens - Horizontal method for the detection of
                                               Shiga toxin-producing Escherichia coli (STEC) belonging to
                                               O157, O111, O26, O103 and O145 serogroups (ISO/DTS
                                               13136:2012)
      11   95 13804 FprEN 13804                Foodstuffs - Determination of elements and their chemical       4020 MADR
                                               species - General considerations and specific requirements

      12   95   14122   prEN 14122             Foodstuffs - Determination of vitamin B1 by HPLC                4020   MADR
      13   95   14152   prEN 14152             Foodstuffs - Determination of vitamin B2 by HPLC                4020   MADR
      14   95   14164   prEN 14164             Foodstuffs - Determination of vitamin B6 by HPLC                4020   MADR
      15   95   15633   CEN/TS 15633-3:2012    Foodstuffs - Detection of food allergens by immunological       5020   MADR
                                               methods - Part 3: Quantitative determination of hazelnut with
                                               an enzyme immunoassay using polyclonal antibodies and
                                               Lowry protein detection


      16   95 15633 FprCEN/TS 15633-2          Foodstuffs - Detection of food allergens by immunological       5020 MADR
                                               methods - Part 2: Quantitative determination of hazelnut with
                                               an enzyme immunoassay using monoclonal antibodies and
                                               bicinchoninic acid-protein detection

      17   95 16155 EN 16155:2012              Foodstuffs - Determination of sucralose - High performance      5020 MADR
                                               liquid chromatographic method
18   95 16162 EN 16162:2012            Animal feeding stuffs - Determination of decoquinate by           5020 MADR
                                       HPLC with fluorescence detection
19   95 16204 EN 16204:2012            Foodstuffs - Determination of lipophilic algal toxins (okadaic    5020 MADR
                                       acid group toxins, yessotoxins, azaspiracids, pectenotoxins)
                                       in shellfish and shellfish products by LC-MS/MS

20   95 16215 EN 16215:2012            Animal feeding stuffs - Determination of dioxins and dioxin-      5020 MADR
                                       like PCBs by GC/HRMS and of indicator PCBs by GC/HRMS

21   95 16277 EN 16277:2012            Animal feeding stuffs - Determination of mercury by cold-         5020 MADR
                                       vapour atomic absorption spectrometry (CVAAS) after
                                       microwave pressure digestion (extraction with 65 % nitric
                                       acid and 30 % hydrogen peroxide)
22   95 16278 EN 16278:2012            Animal feeding stuffs - Determination of inorganic arsenic by     5020 MADR
                                       hydride generation atomic absorption spectrometry (HG-
                                       AAS) after microwave extraction and separation by solid
                                       phase extraction (SPE)
23   95 16279 EN 16279:2012            Animal feeding stuffs - Determination of fluoride content after   5020 MADR
                                       hydrochloric acid treatment by ion-sensitive electrode
                                       method (ISE)
24   95 16338 CEN/TR 16338:2012        Foodstuffs - Detection of food allergens - Template for           5020 MADR
                                       supplying information about immunological methods and
                                       molecular biological methods
25   95 16468 FprCEN/TR 16468          Food analysis - Determination of pesticide residues by GC-        5020 MADR
                                       MS - Retention times and mass spectrometric parameters

26   95 17180 prEN ISO 17180           Animal feeding stuffs - Determination of lysine, methionine       4020 MADR
                                       and threonine in commercial amino acid products and
                                       premixtures (ISO/DIS 17180:2011)
27   95 21569 EN ISO 21569:2005/prA1   Foodstuffs - Methods of analysis for the detection of             4020 MADR
                                       genetically modified organisms and derived products -
                                       Qualitative nucleic acid based methods (ISO
                                       21569:2005/DAM 1:2012)
28   95 21570 EN ISO 21570:2005/prA1   Foodstuffs - Methods of analysis for the detection of             4020 MADR
                                       genetically modified organisms and derived products -
                                       Quantitative nucleic acid based methods (ISO
                                       21570:2005/DAM 1:2012)
29   95 21571 EN ISO 21571:2005/prA1   Foodstuffs - Methods of analysis for the detection of             4020 MADR
                                       genetically modified organisms and derived products -
                                       Nucleic acid extraction (ISO 21571:2005/DAM 1:2011)
30   95 21572 FprEN ISO 21572          Foodstuffs - Molecular biomarker analysis - Protein-based         4020 MADR
                                       methods (ISO/DIS 21572:2012)
31   95 24276 EN ISO 24276:2006/prA1   Foodstuffs - Methods of analysis for the detection of             4020 MADR
                                       genetically modified organisms and derived products -
                                       General requirements and definitions (ISO 24276:2006/DAM
                                       1:2011)
32 180   3657 prEN ISO 3657 rev        Animal and vegetable fats and oils - Determination of             4020 MADR
                                       saponification value (ISO/DIS 3657:2012)
33 180   3961 prEN ISO 3961 rev        Animal and vegetable fats and oils - Determination of iodine      4020 MADR
                                       value (ISO/DIS 3961:2012)
34 180   5526 prEN ISO 5526            Cereals, pulses and other food grains - Nomenclature              4020 MADR
                                       (ISO/DIS 5526:2011)
35 180   5527 prEN ISO 5527            Cereals - Vocabulary (ISO/DIS 5527:2012)                          4020 MADR
36 180   9235 prEN ISO 9235            Aromatic natural raw materials - Vocabulary (ISO/DIS              4020 MADR
                                       9235:2012)
37 180 11746 EN ISO 11746:2012         Rice - Determination of biometric characteristics of kernels      5020 MADR
                                       (ISO 11746:2012)
38 180 11747 EN ISO 11747:2012         Rice - Determination of rice kernel resistance to extrusion       5020 MADR
                                       after cooking (ISO 11747:2012)
39 180 15587 EN 15587:2008/prA1        Cereals and cereal products - Determination of Besatz in          4020 MADR
                                       wheat (Triticum aestivum L.), durum wheat (Triticum durum
                                       Desf.), rye (Secale cereale L.)and feed barley (Hordeum
                                       vulgare L.)
40 180 16324 CEN/TR 16324:2012     Technical report of the interlaboratory study for the               5020 MADR
                                   determination of Besatz in common wheat, rye and durum
                                   wheat
41 180 16378 prEN 16378            Cereals - Determination of Besatz in maize (Zea mays, L.)           4020 MADR
                                   and sorghum (Sorghum bicolor, L.)
42 180 16466 FprEN 16466-1         Vinegar - Isotopic analysis of acetic acid and water - Part 1:      5020 MADR
                                   2H-NMR analysis of acetic acid
43 180 16466 FprEN 16466-2         Vinegar - Isotopic analysis of acetic acid and water - Part 2:      5020 MADR
                                   13C-IRMS analysis of acetic acid
44 180 16466 FprEN 16466-3         Vinegar - Isotopic analysis of acetic acid and water - Part 3:      5020 MADR
                                   18O-IRMS analysis of water in wine vinegar
45 180 20483 prEN ISO 20483 rev    Cereals and pulses - Determination of the nitrogen content          4020 MADR
                                   and calculation of the crude protein content - Kjeldahl
                                   method (ISO/DIS 20483:2012)
46 285 11269 FprEN ISO 11269-1     Soil quality - Determination of the effects of pollutants on soil   5020 MADR
                                   flora - Part 1: Method for the measurement of inhibition of
                                   root growth (ISO 11269-1:2012)
47 285 12579 prEN 12579 rev        Soil improvers and growing media - Sampling                         4020 MADR
48 285 12580 prEN 12580 rev        Soil improvers and growing media - Determination of a               4020 MADR
                                   quantity
49 285 12782 EN ISO 12782-1:2012   Soil quality - Parameters for geochemical modelling of              5020 MADR
                                   leaching and speciation of constituents in soils and materials
                                   - Part 1: Extraction of amorphous iron oxides and hydroxides
                                   with ascorbic acid (ISO 12782-1:2012)
50 285 12782 EN ISO 12782-2:2012   Soil quality - Parameters for geochemical modelling of              5020 MADR
                                   leaching and speciation of constituents in soils and materials
                                   - Part 2: Extraction of crystalline iron oxides and hydroxides
                                   with dithionite (ISO 12782-2:2012)
51 285 12782 EN ISO 12782-3:2012   Soil quality - Parameters for geochemical modelling of              5020 MADR
                                   leaching and speciation of constituents in soils and materials
                                   - Part 3: Extraction of aluminium oxides and hydroxides with
                                   ammonium oxalate/oxalic acid (ISO 12782-3:2012)

52 285 12782 EN ISO 12782-4:2012   Soil quality - Parameters for geochemical modelling of              5020 MADR
                                   leaching and speciation of constituents in soils and materials
                                   - Part 4: Extraction of humic substances from solid samples
                                   (ISO 12782-4:2012)
53 285 12782 EN ISO 12782-5:2012   Soil quality - Parameters for geochemical modelling of              5020 MADR
                                   leaching and speciation of constituents in soils and materials
                                   - Part 5: Extraction of humic substances from aqueous
                                   samples (ISO 12782-5:2012)
54 285 16387 prEN ISO 16387        Soil quality - Effects of pollutants on Enchytraeidae               4020 MADR
                                   (Enchytraeus sp.) - Determination of effects on reproduction
                                   (ISO/DIS 16387:2012)
55 285 17380 prEN ISO 17380        Soil quality - Determination of total cyanide and easily            4020 MADR
                                   liberatable cyanide - Continuous-flow analysis method
                                   (ISO/DIS 17380:2011)
56 285 28258 prEN ISO 28258        Soil quality - Digital exchange of soil-related data (ISO/DIS       4020 MADR
                                   28258:2012)
57 216     54 prEN 54-10 rev       Fire detection and fire alarm systems - Part 10: Flame              4020 MAI
                                   detectors - Point detectors
58 216     54 prEN 54-14           Fire detection and fire alarm systems - Part 14: Guidelines         4020 MAI
                                   for planning, design, installation, commissioning, use and
                                   maintenance
59 216     54 prEN 54-2 rev        Fire detection and fire alarm systems - Part 2: Control and         4020 MAI
                                   indicating equipment
60 216     54 prEN 54-31           Fire detection and fire alarm system - Part 31: Multi-sensor        4020 MAI
                                   fire detectors - Point detectors using a combination of
                                   smoke, carbon monoxide and optionally heat sensors

61 216    671 EN 671-1:2012        Fixed firefighting systems - Hose systems - Part 1: Hose            5020 MAI
                                   reels with semi-rigid hose
62 216    671 EN 671-2:2012        Fixed firefighting systems - Hose systems - Part 2: Hose            5020 MAI
                                   systems with lay-flat hose
63 216   1846 EN 1846-2:2009/FprA1   Firefighting and rescue service vehicles - Part 2: Common         5020 MAI
                                     requirements - Safety and performance
64 216   5923 EN ISO 5923:2012       Equipment for fire protection and fire fighting - Fire            5020 MAI
                                     extinguishing media - Carbon dioxide (ISO 5923:2012)
65 216 13204 EN 13204:2004/FprA1     Double acting hydraulic rescue tools for fire and rescue          5020 MAI
                                     service use - Safety and performance requirements

66 216 14604 prEN 14604              Smoke alarm devices                                               4020 MAI
67 216 16327 prEN 16327              Fire-fighting - Positive pressure foam proportioning systems      4020 MAI
                                     (PPFPS) and compressed air foam systems (CAFS)

68 217   1363 EN 1363-1:2012         Fire resistance tests - Part 1: General Requirements              5020 MAI
69 217   1364 prEN 1364-1 rev        Fire resistance tests for non-loadbearing elements - Part 1:      4020 MAI
                                     Walls
70 217   1364 prEN 1364-3            Fire resistance tests for non-loadbearing elements - Part 3:      4020 MAI
                                     Curtain walling - Full configuration (complete assembly)

71 217   1364 prEN 1364-4            Fire resistance tests for non-loadbearing elements - Part 4:      4020 MAI
                                     Curtain walling - Part configuration
72 217   1365 EN 1365-1:2012         Fire resistance tests for loadbearing elements - Part 1: Walls    5020 MAI

73 217   1634 FprEN 1634-1           Fire resistance and smoke control tests for door and shutter      5020 MAI
                                     assemblies, openable windows and elements of building
                                     hardware - Part 1: Fire resistance test for door and shutter
                                     assemblies and openable windows
74 217 13381 EN 13381-6:2012         Test methods for determining the contribution to the fire         5020 MAI
                                     resistance of structural members - Part 6: Applied protection
                                     to concrete filled hollow steel columns
75 217 13381 prEN 13381-1 rev        Test methods for determining the contribution to the fire         4020 MAI
                                     resistance of structural members - Part 1: Horizontal
                                     protective membranes
76 217 13381 prEN 13381-2            Test methods for determining the contribution to the fire         4020 MAI
                                     resistance of structural members - Part 2: Vertical protective
                                     membranes
77 217 13381 prEN 13381-3            Test methods for determining the contribution to the fire         4020 MAI
                                     resistance of structural members - Part 3: applied protection
                                     to concrete members
78 217 13381 prEN 13381-5            Test methods for determining the contribution to the fire         4020 MAI
                                     resistance of structural members - Part 5: Applied protection
                                     to concrete/profiled sheet steel composite members

79 217 13501 prEN 13501-6            Fire classification of construction products and building         4020 MAI
                                     elements - Part 6: Classification using data from reaction to
                                     fire tests on electric cables
80 217 15254 EN 15254-7:2012         Extended application of results from fire resistance tests -      5020 MAI
                                     Non-loadbearing ceilings - Part 7: Metal sandwich panel
                                     construction
81 217 15254 prEN 15254-6            Extended application of results from fire resistance tests -      4020 MAI
                                     Non-loadbearing walls - Part 6: Curtain walling
82 217 15269 EN 15269-2:2012         Extended application of test results for fire resistance and/or   5020 MAI
                                     smoke control for door, shutter and openable window
                                     assemblies, including their elements of building hardware -
                                     Part 2: Fire resistance of hinged and pivoted steel doorsets


83 217 15269 EN 15269-3:2012         Extended application of test results for fire resistance and/or   5020 MAI
                                     smoke control for door, shutter and openable window
                                     assemblies, including their elements of building hardware -
                                     Part 3: Fire resistance of hinged and pivoted timber doorsets
                                     and openable timber framed windows
 84 217 15269 prEN 15269-5            Extended application of test results for fire resistance and/or     4020 MAI
                                      smoke control for door, shutter and openable window
                                      assesmblies, including their elements of building hardware -
                                      Part 5: Fire resistance of hinged and pivoted metal framed
                                      glazed doorsets and openable windows


 85 217 15882 EN 15882-4:2012         Extended application of results from fire resistance tests for      5020 MAI
                                      service installations - Part 4: Linear joint seals
 86 217 45545 FprEN 45545-5           Railway applications - Fire protection on railway vehicles -        5020 MAI
                                      Part 5: Fire safety requirements for electrical equipment
                                      including that of trolley buses, track guided buses and
                                      magnetic levitation vehicles
 87 217 45545 FprEN 45545-5:2012      Railway applications - Fire protection on railway vehicles --       5020 MAI
                                      Part 5: Fire safety requirements for electrical equipment
                                      including that of trolley buses, track guided buses and
                                      magnetic levitation vehicles
 88 380 15999 prEN 15999-1            Conservation of cultural heritage - Guidelines for                  4020 MCPN
                                      management of environmental conditions -
                                      Recommendations for showcases used for exhibition and
                                      preservation of cultural property - Part 1: General
                                      requirements
 89 380 16085 EN 16085:2012           Conservation of Cultural property - Methodology for sampling        5020 MCPN
                                      from materials of cultural property - General rules

 90 380 16095 EN 16095:2012           Conservation of cultural property - Condition recording for         5020 MCPN
                                      movable cultural heritage
 91 380 16096 EN 16096:2012           Conservation of cultural property - Condition survey and            5020 MCPN
                                      report of built cultural heritage
 92 380 16141 EN 16141:2012           Conservation of cultural heritage - Guidelines for                  5020 MCPN
                                      management of environmental conditions - Open storage
                                      facilities: definitions and characteristics of collection centres
                                      dedicated to the preservation and management of cultural
                                      heritage
 93 380 16242 EN 16242:2012           Conservation of cultural property - Procedures and                  5020 MCPN
                                      instruments for measuring humidity in the air and moisture
                                      exchanges between air and cultural property
 94 380 16302 FprEN 16302             Conservation of cultural property - Test methods -                  5020 MCPN
                                      Measurement of water absorption by pipe method
 95 380 16322 prEN 16322              Conservation of cultural property - Test methods -                  4020 MCPN
                                      Determination of drying properties
 96 380 16455 prEN 16455              Conservation of cultural heritage - Determination of soluble        4020 MCPN
                                      salts in natural stone and related materials used in cultural
                                      heritage
 97 138 50411 EN 50411-3-1:2012       Fibre organisers and closures to be used in optical fibre           5020 MCSI
                                      communication systems - Product specifications -- Part 3-1:
                                      Fibre management system, splice wall box, for category C &
                                      G
 98 138 50411 FprEN 50411-3-6:2012    Fibre organisers and closures to be used in optical fibre           5020 MCSI
                                      communication systems - Product specifications -- Part 3-6:
                                      Multimode mechanical fibre splice
 99 138 50510 CLC/FprTR 50510:2012    Fibre optic access to end-user - A guideline to building of 5020 MCSI
                                      FTTX fibre optic network
100 138 50551 prEN 50551-2:2012       Simplex and duplex cables to be used for cords -- Part 2:   4020 MCSI
                                      Detailed specification and minimum requirements for simplex
                                      ruggedized single mode cables to be used for
                                      patchcords/cords category U
101 138 50582 prEN 50582:2012         Method of test for resistance to fire of unprotected optical        4020 MCSI
                                      fibre cables for use in emergency circuits (diameter less than
                                      or equal to 20 mm)
102 138 60793 FprEN 60793-1-42:2011   Optical fibres -- Part 1-42: Measurement methods and test           5020 MCSI
                                      procedures - Chromatic dispersion
103 138 60793 FprEN 60793-1-54:2011   Optical fibres -- Part 1-54: Measurement methods and test           5020 MCSI
                                      procedures - Gamma irradiation
104 138 60793 FprEN 60793-2-30:2011   Optical fibres -- Part 2-30: Product specifications - Sectional    5020 MCSI
                                      specification for category A3 multimode fibres

105 138 60793 FprEN 60793-2-50:2012   Optical fibres -- Part 2-50: Product specifications - Sectional  5020 MCSI
                                      specification for class B single-mode fibres
106 138 60793 FprEN 60793-2-50:2012   Optical fibres -- Part 2-50: Product specifications - Sectional  5020 MCSI
                                      specification for class B single-mode fibres
107 138 60794 EN 60794-1-22:2012      Optical fibre cables -- Part 1-22: Generic specification - Basic 5020 MCSI
                                      optical cable test procedures - Environmental test methods

108 138 60794 EN 60794-1-23:201X      Optical fibre cables -- Part 1-23: Generic specification - Basic 5020 MCSI
                                      optical cable test procedures - Cable element test methods

109 138 60794 EN 60794-1-23:201X      Optical fibre cables -- Part 1-23: Generic specification - Basic 5020 MCSI
                                      optical cable test procedures - Cable element test methods

110 138 60794 EN 60794-2-11:2012      Optical fibre cables -- Part 2-11: Indoor optical fibre cables -   5020 MCSI
                                      Detailed specification for simplex and duplex cables for use
                                      in premises cabling
111 138 60794 EN 60794-2-21:2012      Optical fibre cables -- Part 2-21: Indoor optical fibre cables -   5020 MCSI
                                      Detailed specification for multi-fibre optical distribution cables
                                      for use in premises cabling
112 138 60794 FprEN 60794-1-24:2012   Optical fibre cables -- Part 1-24: Generic specification - Basic 5020 MCSI
                                      optical cable test procedures - Electrical test methods

113 138 60794 FprEN 60794-2-20:2012   Optical fibre cables -- Part 2-20: Indoor cables - Family          5020 MCSI
                                      specification for multi-fibre optical cables
114 138 60794 FprEN 60794-2-31:2012   Optical fibre cables -- Part 2-31: Indoor cables - Detailed        5020 MCSI
                                      specification for optical fibre ribbon cables for use in
                                      premises cabling
115 138 60794 FprEN 60794-3-12:2012   Optical fibre cables -- Part 3-12: Outdoor cables - Detailed       5020 MCSI
                                      specification for duct and directly buried optical
                                      telecommunication cables for use in premises cabling

116 138 60794 FprEN 60794-3-12:2012   Optical fibre cables -- Part 3-12: Outdoor cables - Detailed       5020 MCSI
                                      specification for duct and directly buried optical
                                      telecommunication cables for use in premises cabling

117 138 60794 FprEN 60794-4-20:2012   Optical fibre cables -- Part 4-20: Aerial optical cables along     5020 MCSI
                                      electrical power lines - Family specification for ADSS (All
                                      Dielectric Self Supported) optical cables
118 138 60794 FprEN 60794-4-20:2012   Optical fibre cables -- Part 4-20: Aerial optical cables along     5020 MCSI
                                      electrical power lines - Family specification for ADSS (All
                                      Dielectric Self Supported) optical cables
119 138 60869 FprEN 60869-1:2012      Fibre optic interconnecting devices and passive components - 5020 MCSI
                                      Fibre optic passive power control devices -- Part 1: Generic
                                      specification
120 138 60869 FprEN 60869-1:2012      Fibre optic interconnecting devices and passive components - 5020 MCSI
                                      Fibre optic passive power control devices -- Part 1: Generic
                                      specification
121 138 61280 FprEN 61280-1-1:2012    Fibre optic communication subsystem basic test procedures -- 5020 MCSI
                                      Part 1-1: Test procedures for general communication
                                      subsystems - Transmitter output optical power measurement
                                      for single-mode optical fibre cable
122 138 61280 FprEN 61280-2-2:2011    Fibre optic communication subsystem test procedures -- Part        5020 MCSI
                                      2-2: Digital systems - Optical eye pattern, waveform and
                                      extinction ratio measurement
123 138 61300 EN 61300-2-33:2012      Fibre optic interconnecting devices and passive components - 5020 MCSI
                                      Basic test and measurement procedures -- Part 2-33: Tests -
                                      Assembly and disassembly of fibre optic mechanical splices,
                                      fibre management systems and closures
124 138 61300 EN 61300-3-28:2012       Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-28:
                                       Examinations and measurements - Transient loss

125 138 61300 EN 61300-3-38:2012       Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-
                                       38:Examinations and measurements - Group delay,
                                       chromatic dispersion and phase ripple
126 138 61300 FprEN 61300-2-11:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-11: Tests -
                                       Axial compression
127 138 61300 FprEN 61300-2-14:201X    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-14: Tests -
                                       High optical power
128 138 61300 FprEN 61300-2-14:201X    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-14: Tests -
                                       High optical power
129 138 61300 FprEN 61300-2-19:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-19: Tests -
                                       Damp heat (steady state)
130 138 61300 FprEN 61300-2-19:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-19: Tests -
                                       Damp heat (steady state)
131 138 61300 FprEN 61300-2-28:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-28: Tests -
                                       Industrial atmosphere (sulphur dioxide)

132 138 61300 FprEN 61300-2-52:201X    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-52: Tests -
                                       Bending test for cords
133 138 61300 FprEN 61300-2-7:201X     Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 2-7: Tests -
                                       Bending moment
134 138 61300 FprEN 61300-3-29:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-29:
                                       Examinations and measurements - Spectral transfer
                                       characteristics of DWDM devices
135 138 61300 FprEN 61300-3-4:2012     Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-4:
                                       Examinations and measurements - Attenuation

136 138 61300 FprEN 61300-3-4:2012     Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-4:
                                       Examinations and measurements - Attenuation

137 138 61300 FprEN 61300-3-49:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-49:
                                       Measurement: Guide pin retention force for rectangular
                                       ferrule multi-fibre connectors
138 138 61300 FprEN 61300-3-50:2012    Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Basic test and measurement procedures -- Part 3-50:
                                       Examinations and measurements - Crosstalk for optical
                                       spatial switches
139 138 61753 EN 61753-061-2:201X      Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 061-2: Non-connectorised
                                       single-mode fibre optic pigtailed isolators for category C -
                                       Controlled environment
140 138 61753 FprEN 61753-021-3:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 021-3: Single-mode fibre optic
                                       connectors for category U - Uncontrolled environment
141 138 61753 FprEN 61753-021-3:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 021-3: Single-mode fibre optic
                                       connectors for category U - Uncontrolled environment

142 138 61753 FprEN 61753-022-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 022-2: Fibre optic connectors
                                       terminated on multimode fibre for category C - Controlled
                                       environment
143 138 61753 FprEN 61753-051-3:201X   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 051-3: Single mode fibre plug
                                       style optical attenuator for category U - Uncontrolled
                                       environment
144 138 61753 FprEN 61753-056-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 056-2: Single mode fibre
                                       pigtailed style optical fuse for category C - Controlled
                                       environment
145 138 61753 FprEN 61753-056-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 056-2: Single mode fibre
                                       pigtailed style optical fuse for category C - Controlled
                                       environment
146 138 61753 FprEN 61753-057-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 057-2: Single mode fibre plug-
                                       recptacle-receptacle style optical fuse for category C -
                                       Controlled environment
147 138 61753 FprEN 61753-057-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 057-2: Single mode fibre plug-
                                       recptacle-receptacle style optical fuse for category C -
                                       Controlled environment
148 138 61753 FprEN 61753-058-2:201X   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 058-2: Single mode fibre
                                       pigtailed style optical power limiter for category C - Controlled
                                       environment
149 138 61753 FprEN 61753-059-2:201X   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 059-2: Single mode fibre plug-
                                       receptacle style optical power limiter for category C -
                                       Controlled environment
150 138 61753 FprEN 61753-071-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 071-2: Non-connectorised
                                       single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for
                                       category C - Controlled environments

151 138 61753 FprEN 61753-088-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 088-2: Non connectorised
                                       single-mode fibre optic LAN WDM devices with channel
                                       spacing of 800 GHz for category C - Controlled environment

152 138 61753 FprEN 61753-089-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 089-2: Non-connectorised
                                       single-mode bidirectional OTDR monitoring WWDM devices
                                       for Category C - Controlled environment


153 138 61753 FprEN 61753-091-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 091-2: Non-connectorised
                                       single-mode fibre optic pigtailed circulators for category C -
                                       Controlled environment
154 138 61753 FprEN 61753-143-2:2012   Fibre optic interconnecting devices and passive components - 5020 MCSI
                                       Performance standard -- Part 143-2: Optical passive VIPA-
                                       based dispersion compensator of single-mode fibre
                                       transmission for category C - Controlled environments
155 138 61753 FprEN 61753-143-2:2012      Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Performance standard -- Part 143-2: Optical passive VIPA-
                                          based dispersion compensator of single-mode fibre
                                          transmission for category C - Controlled environments


156 138 61754 EN 61754-20:2012            Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 20: Type LC
                                          connector family
157 138 61754 EN 61754-20-100:2012        Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 20-100: Interface
                                          standard for LC connectors with protective housings related
                                          to IEC 61076-3-106
158 138 61754 EN 61754-28:2012            Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 28: Type LF3
                                          connector family
159 138 61754 EN 61754-29:2012            Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 29: Type BLINK
                                          connector series
160 138 61754 FprEN 61754-27:201X         Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 27: Type M12-FO
                                          connector famlily
161 138 61754 FprEN 61754-4:2012          Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 4: Type SC connector
                                          family
162 138 61754 FprEN 61754-6:2012          Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic connector interfaces -- Part 6: Type MU connector
                                          family
163 138 61755 EN 61755-3-6:2006/A1:2012   Fibre optic connector optical interfaces -- Part 3-6: Optical    5020 MCSI
                                          interface - 2,5 mm and 1,25 mm diameter cylindrical 8
                                          degrees angled-PC composite ferrule using Cu-Ni-alloy as
                                          fibre surrounding material, single mode fibre

164 138 61757 EN 61757-1:2012             Fibre optic sensors -- Part 1: Generic specification         5020 MCSI
165 138 62074 FprEN 62074-1:2012          Fibre optic interconnecting devices and passive components - 5020 MCSI
                                          Fibre optic WDM devices -- Part 1: Generic specification

166 138 62343 FprEN 62343:2012            Dynamic modules and devices - General and guidance               5020 MCSI
167 138 62343 FprEN 62343-1-3:2012        Dynamic modules -- Part 1-3: Performance standards -             5020 MCSI
                                          Dynamic gain tilt equalizer (non-connectorized)
168 138 62496 FprEN 62496-2-4:2012        Optical circuit boards -- Part 2-4: Tests - Optical transmission 5020 MCSI
                                          test for optical circuit boards without input/output fibres

169 204 14890 prEN 14890-1                Application Interface for smart cards used as Secure             4020 MCSI
                                          Signature Creation Devices - Part 1: Basic services
170 204 14890 prEN 14890-2                Application Interface for smart cards used as Secure             4020 MCSI
                                          Signature Creation Devices - Part 2: Additional Services
171 204 15480 CEN/TS 15480-1:2012         Identification card systems - European Citizen Card - Part 1:    5020 MCSI
                                          Physical, electrical and transport protocol characteristics

172 204 16428 CEN/TS 16428:2012           Biometrics Interoperability profiles - Best Practices for slap   5020 MCSI
                                          tenprint captures
173 204 4E+05 FprEN 419251-1              Security requirements for device for authentication - Part 1:    5020 MCSI
                                          Protection profile for core functionality
174 204 4E+05 FprEN 419251-2              Security requirements for device for authentication - Part 2:    5020 MCSI
                                          Protection profile for extension for trusted channel to
                                          certificate generation application
175 204 4E+05 FprEN 419251-3              Security requirements for device for authentication - Part 3:    5020 MCSI
                                          Additional functionality for security targets
176 207 13321 EN 13321-1:2012             Open data communication in building automation, controls         5020 MCSI
                                          and building management - Home and building electronic
                                          system - Part 1: Product and system requirements
177 207 13321 FprEN 13321-2:2012           Open Data Communication in Building Automation, Controls       5020 MCSI
                                           and Building Management - Home and Building Electronic
                                           Systems - Part 2: KNXnet/IP Communication
178 207 14597 EN 14597:2012                Temperature control devices and temperature limiters for       5020 MCSI
                                           heat generating systems
179 207 16484 EN ISO 16484-5:2012          Building automation and control systems - Part 5: Data         5020 MCSI
                                           communication protocol (ISO 16484-5:2012)
180 207 50173 CLC/TR 50173-99-3:2012       Information technology - Generic cabling systems -- Part 99-   5020 MCSI
                                           3: Home cabling infrastructures up to 50 m in length to
                                           support simultaneous and non simultaneous provision of
                                           applications
181 207 50173 EN 50173-4:2007/FprAB:2012   Information technology - Generic cabling systems -- Part 4:    5020 MCSI
                                           Homes
182 207 50173 EN 50173-5:2007/FprAB:2012   Information technology - Generic cabling systems -- Part 5:    4020 MCSI
                                           Data centres
183 207 50173 EN 50173-5:2007/FprAB:2012   Information technology - Generic cabling systems -- Part 5:    5020 MCSI
                                           Data centres
184 207 50173 prEN 50173-6:2012            Information technology - Generic cabling systems -- Part 6:    4020 MCSI
                                           Distributed building services
185 207 50174 prEN 50174-3:2012            Information technology - Cabling installation -- Part 3:       4020 MCSI
                                           Installation planning and practices outside buildings
186 207 50412 prEN 50412-4:2012            Power line communication apparatus and systems used in         4020 MCSI
                                           low-voltage installations in the frequency range 1,6 MHz to
                                           30 MHz -- Part 4: Low rate wide band services (LRWBS)
                                           operating between 2 MHz and 4 MHz - Channel allocations

187 207 50491 EN 50491-4-1:2012            General requirements for Home and Building Electronic          5020 MCSI
                                           Systems (HBES) and Building Automation and Control
                                           Systems (BACS) -- Part 4-1: General functional safety
                                           requirements for products intended to be integrated in
                                           Building Electronic Systems (HBES) and Building
                                           Automation and Control Systems (BACS)
188 207 50600 FprEN 50600-1:2012           Information technology - Data centre facilities and            4020 MCSI
                                           infrastructures -- Part 1: General concepts
189 207 50600 FprEN 50600-1:2012           Information technology - Data centre facilities and            5020 MCSI
                                           infrastructures -- Part 1: General concepts
190 319   1828 EN ISO 1828:2012            Health informatics - Categorial structure for terminological   5020 MCSI
                                           systems of surgical procedures (ISO 1828:2012)

191 319 10781 prEN ISO 10781               Electronic health record-system functional model (ISO/DIS      4020 MCSI
                                           10781:2012)
192 319 11073 FprEN ISO 11073-10406        Health informatics - Personal health device communication -    5020 MCSI
                                           Part 10406: Device specialization - Basic electrocardiograph
                                           (ECG) (1- to 3-lead ECG) (ISO/FDIS 11073-10406:2012)

193 319 11073 FprEN ISO 11073-10420        Health informatics - Personal health device communication -    5020 MCSI
                                           Part 10420: Device specialization - Body composition
                                           analyzer (ISO/FDIS 11073-10420:2012)

194 319 11073 FprEN ISO 11073-10421        Health informatics - Personal health device communication -    5020 MCSI
                                           Part 10421: Device specialization - Peak expiratory flow
                                           monitor (peak flow) (ISO/FDIS 11073-10421:2012)

195 319 11073 FprEN ISO 11073-10472        Health Informatics - Personal health device communication -    5020 MCSI
                                           Part 10472: Device specialization - Medication monitor
                                           (ISO/FDIS 11073-10472:2012)
196 319 11073 FprEN ISO 11073-30400        Health informatics - Point-of-care medical device              5020 MCSI
                                           communication - Part 30400: Interface profile - Cabled
                                           Ethernet (ISO/FDIS 11073-30400:2012)
197 319 11238 FprEN ISO 11238              Health informatics - Identification of medicinal products -    5020 MCSI
                                           Data elements and structures for the unique identification
                                           and exchange of regulated information on substances
                                           (ISO/FDIS 11238:2012)
198 319 11239 FprEN ISO 11239              Health informatics - Identification of medicinal products -       5020 MCSI
                                           Data elements and structures for the unique identification
                                           and exchange of regulated information on pharmaceutical
                                           dose forms, units of presentation, routes of administration
                                           and packaging (ISO/FDIS 11239:2012)


199 319 11240 FprEN ISO 11240              Health informatics - Identification of medicinal products -       5020 MCSI
                                           Data elements and structures for the unique identification
                                           and exchange of units of measurement (ISO/FDIS
                                           11240:2012)
200 319 11615 FprEN ISO 11615              Health informatics - Identification of medicinal products -       5020 MCSI
                                           Data elements and structures for the unique identification
                                           and exchange of regulated medicinal product information
                                           (ISO/FDIS 11615:2012)
201 319 11616 FprEN ISO 11616              Health informatics - Identification of medicinal products -       5020 MCSI
                                           Data elements and structures for the unique identification
                                           and exchange of regulated pharmaceutical product
                                           information (ISO/FDIS 11616:2012)


202 319 13119 FprEN ISO 13119              Health informatics - Clinical knowledge resources - Metadata 5020 MCSI
                                           (ISO/FDIS 13119:2012)
203 319 13606 EN ISO 13606-1:2012          Health informatics - Electronic health record communication - 5020 MCSI
                                           Part 1: Reference model (ISO 13606-1:2008)

204 319 14265 FprCEN ISO/TS 14265          Health Informatics - Classification of purposes for processing    5020 MCSI
                                           personal health information (ISO/TS 14265:2011)

205 319 21549 prEN ISO 21549-2 rev         Health informatics - Patient healthcard data - Part 2:            4020 MCSI
                                           Common objects (ISO/DIS 21549-2:2012)
206 319 21549 prEN ISO 21549-3 rev         Health informatics - Patient healthcard data - Part 3: Limited    4020 MCSI
                                           clinical data (ISO/DIS 21549-3:2012)
207 319 21549 prEN ISO 21549-4 rev         Health informatics - Patient healthcard data - Part 4:            4020 MCSI
                                           Extended clinical data (ISO/DIS 21549-4:2012)
208 319 27789 prEN ISO 27789               Health informatics - Audit trails for electronic health records   4020 MCSI
                                           (ISO/DIS 27789:2011)
209 375 50849 FprEN 50849:2011             Sound systems for emergency purposes                              5020 MCSI
210 375 60268 FprEN 60268-3:2012           Sound system equipment -- Part 3: Amplifiers (GMT)                5020 MCSI
211 375 61883 EN 61883-8:2009/FprA1:2012   Consumer audio/video equipment - Digital interface -- Part 8:     5020 MCSI
                                           Transmission of ITU-R BT.601 style digital video data

212 375 61883 FprEN 61883-6:2012           Consumer audio/video equipment - Digital interface -- Part 6:     5020 MCSI
                                           Audio and music data transmission protocol
213 375 61937 EN 61937-6:2006/FprA1:2012   Digital audio - Interface for non-linear PCM encoded audio        5020 MCSI
                                           bitstreams applying IEC 60958 -- Part 6: Non-linear PCM
                                           bitstreams according to the MPEG-2 AAC and MPEG-4 AAC
                                           audio formats
214 375 61938 FprEN 61938:2011             Multimedia systems - Guide to the recommended                     5020 MCSI
                                           characteristics of analogue interfaces to achieve
                                           interoperability
215 375 62087 EN 62087:2012                Methods of measurement for the power consumption of               5020 MCSI
                                           audio, video and related equipment
216 375 62227 EN 62227:2008/FprA1:2012     Multimedia home server systems - Digital rights permission        5020 MCSI
                                           code
217 375 62379 FprEN 62379-5-2:2012         Common control interface for networked digital audio and          5020 MCSI
                                           video products -- Part 5-2: Transmission over networks -
                                           Signalling
218 375 62394 FprEN 62394:2012             Service diagnostic interface for consumer electronics             5020 MCSI
                                           products and networks - Implementation for ECHONET
219 375 62516 FprEN 62516-3:2012           Terrestrial digital multimedia broadcasting (T-DMB) receivers     5020 MCSI
                                           -- Part 3: Common API
220 375 62680 FprEN 62680-1:2012           Universal Serial Bus interfaces for data and power -- Part 1:     5020 MCSI
                                           Universal Serial Bus specification
221 375 62680 FprEN 62680-2:2012      Universal Serial Bus interfaces for data and power -- Part 2:    5020 MCSI
                                      USB micro-USB cables and connectors specification

222 375 62680 FprEN 62680-3:2012      Universal Serial Bus interfaces for data and power -- Part 3:    5020 MCSI
                                      USB battery charging specification
223 375 62680 FprEN 62680-4:2012      Universal Serial Bus interfaces for data and power -- Part 4:    5020 MCSI
                                      Universal Serial Bus cables and connectors class

224 375 62698 FprEN 62698:2012        Multimedia home server systems - Rights information              5020 MCSI
                                      interoperability for IPTV
225 375 62731 FprEN 62731:2012        Text-to-Speech for television - General requirements             5020 MCSI
226 379 13850 FprEN 13850             Postal Services - Quality of Services - Measurement of the       5020 MCSI
                                      transit time of end-to-end services for single piece priority
                                      mail and first class mail
227 379 16326 FprCEN/TS 16326         Postal Services - Hybrid Mail - Functional Specification for     5020 MCSI
                                      postal registered electronic mail
228 379 16425 prEN 16425              Simple Publishing Interface                                      4020 MCSI
229 379 16426 prEN 16426              Simple Query Interface                                           4020 MCSI
230 379 19788 FprEN ISO/IEC 19788-1   Information technology - Learning, education and training -      5020 MCSI
                                      Metadata for learning resources - Part 1: Framework
                                      (ISO/IEC 19788-1:2011)
231 379 19788 FprEN ISO/IEC 19788-2   Information technology - Learning, education and training -      5020 MCSI
                                      Metadata for learning resources - Part 2: Dublin Core
                                      elements (ISO/IEC 19788-2:2011)
232 111   197 prEN 197-2 rev          Cement - Part 2: Conformity evaluation                           4020 MDRT
233 111 13282 FprEN 13282-1           Hydraulic road binders - Part 1: Rapid hardening hydraulic       5020 MDRT
                                      road binders - Composition, specifications and conformity
                                      criteria
234 111 13282 FprEN 13282-2           Hydraulic road binders - Part 2: Normal hardening hydraulic      5020 MDRT
                                      road binders - Composition, specifications and conformity
                                      criteria
235 111 13282 FprEN 13282-3           Hydraulic road binders - Part 3: Conformity evaluation           5020 MDRT
236 111 13950 prEN 13950 rev          Gypsum board thermal/acoustic insulation composite panels -      4020 MDRT
                                      Definitions, requirements and test methods
237 111 13963 prEN 13963 rev          Jointing materials for gypsum boards - Definitions,              4020 MDRT
                                      requirements and test methods
238 111 14190 prEN 14190 rev          Gypsum plasterboard products from processing - Definitions,      4020 MDRT
                                      requirements and test methods
239 111 14195 prEN 14195 rev          Metal framing components for gypsum board systems -              4020 MDRT
                                      Definitions, requirements and test methods
240 113    492 EN 492:2012            Fibre-cement slates and fittings - Product specification and     5020 MDRT
                                      test methods
241 113    494 EN 494:2012            Fibre-cement profiled sheets and fittings - Product              5020 MDRT
                                      specification and test methods
242 113    502 FprEN 502              Roofing products from metal sheet - Specification for fully      5020 MDRT
                                      supported roofing products of stainless steel sheet

243 113    505 FprEN 505              Roofing products from metal sheet - Specification for fully      5020 MDRT
                                      supported roofing products of steel sheet
244 113    822 FprEN 822              Thermal insulating products for building applications -          5020 MDRT
                                      Determination of length and width
245 113    823 FprEN 823              Thermal insulating products for building applications -          5020 MDRT
                                      Determination of thickness
246 113    824 FprEN 824              Thermal insulating products for building applications -          5020 MDRT
                                      Determination of squareness
247 113    825 FprEN 825              Thermal insulating products for building applications -          5020 MDRT
                                      Determination of flatness
248 113    826 FprEN 826              Thermal insulating products for building applications -          5020 MDRT
                                      Determination of compression behaviour
249 113   1013 FprEN 1013             Light transmitting single skin profiled plastics sheets for      5020 MDRT
                                      internal and external roofs, walls and ceilings - Requirements
                                      and test methods
250 113   1602 FprEN 1602             Thermal insulating products for building applications -          5020 MDRT
                                      Determination of the apparent density
251 113   1603 FprEN 1603     Thermal insulating products for building applications -           5020 MDRT
                              Determination of dimensional stability under constant normal
                              laboratory conditions (23 °C/ 50 % relative humidity)

252 113   1604 FprEN 1604     Thermal insulating products for building applications -           5020 MDRT
                              Determination of dimensional stability under specified
                              temperature and humidity conditions
253 113   1605 FprEN 1605     Thermal insulating products for building applications -           5020 MDRT
                              Determination of deformation under specified compressive
                              load and temperature conditions
254 113   1606 FprEN 1606     Thermal insulating products for building applications -           5020 MDRT
                              Determination of compressive creep
255 113   1607 FprEN 1607     Thermal insulating products for building applications -           5020 MDRT
                              Determination of tensile strength perpendicular to faces
256 113   1608 FprEN 1608     Thermal insulating products for building applications -           5020 MDRT
                              Determination of tensile strength parallel to faces
257 113   1609 FprEN 1609     Thermal insulating products for building applications -           5020 MDRT
                              Determination of short term water absorption by partial
                              immersion
258 113 12085 FprEN 12085     Thermal insulating products for building applications -           5020 MDRT
                              Determination of linear dimensions of test specimens
259 113 12086 FprEN 12086     Thermal insulating products for building applications -           5020 MDRT
                              Determination of water vapour transmission properties
260 113 12087 FprEN 12087     Thermal insulating products for building applications -           5020 MDRT
                              Determination of long term water absorption by immersion

261 113 12088 FprEN 12088     Thermal insulating products for building applications -           5020 MDRT
                              Determination of long term water absorption by diffusion

262 113 12089 FprEN 12089     Thermal insulating products for building applications -           5020 MDRT
                              Determination of bending behaviour
263 113 12090 FprEN 12090     Thermal insulating products for building applications -           5020 MDRT
                              Determination of shear behaviour
264 113 12091 FprEN 12091     Thermal insulating products for building applications -           5020 MDRT
                              Determination of freeze-thaw resistance
265 113 12326 FprEN 12326-1   Slate and stone for discontinuous roofing and external            5020 MDRT
                              cladding - Part 1: Specifications for slate and carbonate slate

266 113 12430 FprEN 12430     Thermal insulating products for building applications -           5020 MDRT
                              Determination of behaviour under point load
267 113 12431 FprEN 12431     Thermal insulating products for building applications -           5020 MDRT
                              Determination of thickness for floating floor insulating
                              products
268 113 12467 EN 12467:2012   Fibre-cement flat sheets - Product specification and test         5020 MDRT
                              methods
269 113 13162 FprEN 13162     Thermal insulation products for buildings - Factory made          5020 MDRT
                              mineral wool (MW) products - Specification
270 113 13163 FprEN 13163     Thermal insulation products for buildings - Factory made          5020 MDRT
                              expanded polystyrene (EPS) products - Specification

271 113 13164 FprEN 13164     Thermal insulation products for buildings - Factory made          5020 MDRT
                              extruded polystyrene foam (XPS) products - Specification

272 113 13165 FprEN 13165     Thermal insulation products for buildings - Factory made rigid 5020 MDRT
                              polyurethane foam (PU) products - Specification

273 113 13166 FprEN 13166     Thermal insulation products for buildings - Factory made          5020 MDRT
                              phenolic foam (PF) products - Specification
274 113 13167 FprEN 13167     Thermal insulation products for buildings - Factory made          5020 MDRT
                              cellular glass (CG) products - Specification
275 113 13168 FprEN 13168     Thermal insulation products for buildings - Factory made          5020 MDRT
                              wood wool (WW) products - Specification
276 113 13169 FprEN 13169           Thermal insulation products for buildings - Factory made          5020 MDRT
                                    expanded perlite board (EPB) products - Specification

277 113 13170 FprEN 13170           Thermal insulation products for buildings - Factory made          5020 MDRT
                                    products of expanded cork (ICB) - Specification
278 113 13171 FprEN 13171           Thermal insulation products for buildings - Factory made          5020 MDRT
                                    wood fibre (WF) products - Specification
279 113 13469 EN 13469:2012         Thermal insulating products for building equipment and            5020 MDRT
                                    industrial installations - Determination of water vapour
                                    transmission properties of preformed pipe insulation
280 113 13472 EN 13472:2012         Thermal insulating products for building equipment and            5020 MDRT
                                    industrial installations - Determination of short term water
                                    absorption by partial immersion of preformed pipe insulation

281 113 13496 prEN 13496            Thermal insulation products for building applications -           4020 MDRT
                                    Determination of the mechanical properties of glass fibre
                                    meshes
282 113 13583 EN 13583:2012         Flexible sheets for waterproofing - Bitumen, plastic and          5020 MDRT
                                    rubber sheets for roof waterproofing - Determination of hail
                                    resistance
283 113 13707 FprEN 13707           Flexible sheets for waterproofing - Reinforced bitumen            5020 MDRT
                                    sheets for roof waterproofing - Definitions and characteristics

284 113 13956 FprEN 13956           Flexible sheet for waterproofing - Plastic and rubber sheets      5020 MDRT
                                    for roof waterproofing - Definitions and characteristics

285 113 13967 EN 13967:2012         Flexible sheets for waterproofing - Plastic and rubber damp       5020 MDRT
                                    proof sheets including plastic and rubber basement tanking
                                    sheet - Definitions and characteristics

286 113 13984 FprEN 13984           Flexible sheets for waterproofing - Plastic and rubber vapour     5020 MDRT
                                    control layers - Definitions and characteristics
287 113 14303 EN 14303:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made mineral wool (MW)
                                    products - Specification
288 113 14304 EN 14304:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made flexible elastomeric
                                    foam (FEF) products - Specification
289 113 14305 EN 14305:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made cellular glass (CG)
                                    products - Specification
290 113 14306 EN 14306:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made calcium silicate (CS)
                                    products - Specification
291 113 14307 EN 14307:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made extruded polystyrene
                                    foam (XPS) products - Specification
292 113 14308 EN 14308:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made rigid polyurethane
                                    foam (PUR) and polyisocyanurate foam (PIR) products -
                                    Specification
293 113 14309 EN 14309:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made products of expanded
                                    polystyrene (EPS) - Specification
294 113 14313 EN 14313:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made polyethylene foam
                                    (PEF) products - Specification
295 113 14314 EN 14314:2009/FprA1   Thermal insulation products for building equipment and            5020 MDRT
                                    industrial installations - Factory made phenolic foam (PF)
                                    products - Specification
296 113 14315 FprEN 14315-1         Thermal insulating products for buildings - In-situ formed     5020 MDRT
                                    sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR)
                                    foam products - Part 1: Specification for the rigid foam spray
                                    system before installation


297 113 14315 FprEN 14315-2         Thermal insulating products for buildings - In-situ formed  5020 MDRT
                                    sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR)
                                    foam products - Part 2: Specification for the installed
                                    insulation products
298 113 14318 FprEN 14318-1         Thermal insulating products for buildings - In-situ formed       5020 MDRT
                                    dispensed rigid polyurethane (PUR) and polyisocyanurate
                                    (PIR) foam products - Part 1: Specification for the rigid foam
                                    dispensed system before installation


299 113 14318 FprEN 14318-2         Thermal insulating products for buildings - In-situ formed       5020 MDRT
                                    dispensed rigid polyurethane (PUR) and polyisocyanurate
                                    (PIR) foam products - Part 2: Specification for the installed
                                    insulation products
300 113 14319 FprEN 14319-1         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations - In-situ formed dispensed rigid
                                    polyurethane (PUR) and polyisocyanurate foam (PIR)
                                    products - Part 1: Specification for the rigid foam dispensed
                                    system before installation
301 113 14319 FprEN 14319-2         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations – In-situ formed dispensed rigid
                                    polyurethane (PUR) and polyisocyanurate foam (PIR)
                                    products – Part 2: Specification for the installed insulation
                                    products
302 113 14320 FprEN 14320-1         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations - In-situ formed sprayed rigid
                                    polyurethane (PUR) and polyisocyanurate foam (PIR)
                                    products - Part 1: Specification for the rigid foam spray
                                    system before installation
303 113 14320 FprEN 14320-2         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations - In-situ formed sprayed rigid
                                    polyurethane (PUR) and polyisocyanurate foam (PIR)
                                    products - Part 2: Specification for the installed insulation
                                    products
304 113 14706 EN 14706:2012         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations - Determination of maximum service
                                    temperature
305 113 14707 EN 14707:2012         Thermal insulating products for building equipment and           5020 MDRT
                                    industrial installations - Determination of maximum service
                                    temperature for preformed pipe insulation
306 113 14909 EN 14909:2012         Flexible sheets for waterproofing - Plastic and rubber damp      5020 MDRT
                                    proof courses - Definitions and characteristics
307 113 15732 EN 15732:2012         Light weight fill and thermal insulation products for civil      5020 MDRT
                                    engineering applications (CEA) - Expanded clay lightweight
                                    aggregate products (LWA)
308 113 15814 EN 15814:2011/FprA1   Polymer modified bituminous thick coatings for waterproofing     5020 MDRT
                                    - Definitions and requirements
309 113 16069 FprEN 16069           Thermal insulation products for buildings - Factory made         5020 MDRT
                                    products of polyethylene foam (PEF) - Specification

310 113 16382 prEN 16382            Thermal insulation products for building applications -          4020 MDRT
                                    Determination of the pull-through resistance of anchors
                                    through thermal insulation products
311 113 16383 prEN 16383            Thermal insulating products for building applications -          4020 MDRT
                                    Determination of the hygrothermal behaviour of external
                                    thermal insulation composite systems with renders (ETICS)

312 113 16410 CEN/TR 16410:2012     Construction products - Assessment of release of dangerous       5020 MDRT
                                    substances - Barriers to use - Extension to CEN/TR 15855
                                    Barriers to trade
313 114   232 EN 232:2012           Baths - Connecting dimensions                                      5020 MDRT
314 114   251 EN 251:2012           Shower trays - Connecting dimensions                               5020 MDRT
315 114 10545 prEN ISO 10545-9      Ceramic tiles - Part 9: Determination of resistance to thermal     4020 MDRT
                                    shock (ISO/DIS 10545-9:2011)
316 114 12004 EN 12004:2007/FprA1   Adhesives for tiles - Requirements, evaluation of conformity,      5020 MDRT
                                    classification and designation
317 114 14411 EN 14411:2012         Ceramic tiles - Definitions, classification, characteristics,      5020 MDRT
                                    evaluation of conformity and marking
318 114 14428 prEN 14428 rev        Shower enclosures - Functional requirements and test               4020 MDRT
                                    methods
319 114 14891 EN 14891:2012         Liquid-applied water impermeable products for use beneath          5020 MDRT
                                    ceramic tiling bonded with adhesives - Requirements, test
                                    methods, evaluation of conformity, classification and
                                    designation
320 115   1341 FprEN 1341           Slabs of natural stone for external paving - Requirements          5020 MDRT
                                    and test methods
321 115   1342 FprEN 1342           Setts of natural stone for external paving - Requirements and      5020 MDRT
                                    test methods
322 115   1343 FprEN 1343           Kerbs of natural stone for external paving - Requirements          5020 MDRT
                                    and test methods
323 115   1467 EN 1467:2012         Natural stone - Rough blocks - Requirements                        5020 MDRT
324 115   1468 EN 1468:2012         Natural stone - Rough slabs - Requirements                         5020 MDRT
325 115   1469 prEN 1469            Natural stone products - Slabs for cladding - Requirements         4020 MDRT

326 115 12057 prEN 12057            Natural stone products - Modular tiles - Requirements              4020 MDRT
327 115 12058 prEN 12058            Natural stone products - Slabs for floors and stairs -             4020 MDRT
                                    Requirements
328 115 14617 EN 14617-10:2012      Agglomerated stone - Test methods - Part 10: Determination         5020 MDRT
                                    of chemical resistance
329 115 14617 EN 14617-12:2012      Agglomerated stone - Test methods - Part 12: Determination         5020 MDRT
                                    of dimensional stability
330 115 14617 EN 14617-4:2012       Agglomerated stone - Test methods - Part 4: Determination          5020 MDRT
                                    of the abrasion resistance
331 115 14617 EN 14617-5:2012       Agglomerated stone - Test methods - Part 5: Determination          5020 MDRT
                                    of freeze and thaw resistance
332 115 14617 EN 14617-6:2012       Agglomerated stone - Test methods - Part 6: Determination          5020 MDRT
                                    of thermal shock resistance
333 115 16306 FprEN 16306:2012      Natural stone test methods - Determination of resistance of        5020 MDRT
                                    marble to thermal and moisture cycles
334 122    572 EN 572-1:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 1: Definitions and general physical and mechanical
                                    properties
335 122    572 EN 572-2:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 2: Float glass
336 122    572 EN 572-3:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 3: Polished wired glass
337 122    572 EN 572-4:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 4: Drawn sheet glass
338 122    572 EN 572-5:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 5: Patterned glass
339 122    572 EN 572-6:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 6: Wired patterned glass
340 122    572 EN 572-7:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 7: Wired or unwired channel shaped glass

341 122    572 EN 572-8:2012        Glass in building - Basic soda lime silicate glass products -      5020 MDRT
                                    Part 8: Supplied and final cut sizes
342 122   1096 prEN 1096-4          Glass in building - Coated glass - Part 4: Evaluation of           4020 MDRT
                                    conformity / Product standard
343 122 12150 prEN 12150-1          Glass in building - Thermally toughened soda lime silicate         4020 MDRT
                                    safety glass - Part 1: Definition and description
344 122 15682 prEN 15682-1          Glass in building - Heat soaked thermally toughened alkaline       4020 MDRT
                                    earth silicate safety glass - Part 1: Definition and description
345 122 15683 prEN 15683-1                     Glass in building - Thermally toughened soda lime silicate          4020 MDRT
                                               channel shaped safety glass - Part 1: Definition and
                                               description
346 122 15683 prEN 15683-2                     Glass in building - Thermally toughened soda lime silicate          4020 MDRT
                                               channel shaped safety glass - Part 2: Evaluation of
                                               conformity/Product standard
347 136 50573 prHD 50573-5-57:2012             Electrical devices coordination                                     4020 MDRT
348 136 60364 FprHD 60364-5-557:2012           Low-voltage electrical installations -- Part 5-557: Selection       5020 MDRT
                                               and erection of electrical equipment - Auxiliary circuits

349 136 60364 FprHD 60364-7-                   Low-voltage electrical installations -- Part 7-718:                 4020 MDRT
              718:2010/prAA:2012               Requirements for special installations or locations -
                                               Communal facilities and workplaces
350 136 60364 HD 60364-5-                      Electrical installations of buildings -- Part 5-51: Selection and   4020 MDRT
              51:2009/prAA:2012                erection of electrical equipment - Common rules
351 136 60364 HD 60364-7-                      Low-voltage electrical installations -- Part 7-705:                 5020 MDRT
              705:2007/FprA11:2012             Requirements for special installations or locations -
                                               Agricultural and horticultural premises
352 136 60364 HD 60364-7-709:2009/A1:2012 Low-voltage electrical installations -- Part 7-709:                      5020 MDRT
                                          Requirements for special installations or locations - Marinas
                                          and similar locations
353 136 60364 prHD 60364-7-719:2011            Low-voltage installations -- Part 7-719: Requirements for           4020 MDRT
                                               special installations or locations - Lighting installations for
                                               advertising signs with a rated output voltage not exceeding 1
                                               000 V, which are illuminated by hot-cathode-fluorescent-
                                               lamps, luminous-discharge tubes (neon-tubes), inductive
                                               discharge lamps, light emitting diodes (LED) and/or LED
                                               modules
354 186     295 FprEN 295-1                    Vitrified clay pipe systems for drains and sewers - Part 1:  5020 MDRT
                                               Requirements for pipes, fittings and joints
355 186     295 FprEN 295-2                    Vitrified clay pipe systems for drains and sewers - Part 2:  5020 MDRT
                                               Evaluation of conformity and sampling
356 186     295 FprEN 295-4                    Vitrified clay pipe systems for drains and sewers - Part 4:  5020 MDRT
                                               Requirements for adaptors, connectors and flexible couplings

357 186     295 FprEN 295-5                    Vitrified clay pipe systems for drains and sewers - Part 5:         5020 MDRT
                                               Requirements for perforated pipes and fittings
358 186     295 FprEN 295-6                    Vitrified clay pipes systems for drain and sewers - Part 6:         5020 MDRT
                                               Requirements for components of manholes and inspection
                                               chambers
359 186     295 FprEN 295-7                    Vitrified clay pipe systems for drains and sewers - Part 7:   5020 MDRT
                                               Requirements for pipes and joints for pipe jacking
360 186    1124 prEN 1124-4 rev                Pipes and fittings of longitudinally welded stainless steel   4020 MDRT
                                               pipes with spigot and socket for wastewater systems - Part 4:
                                               Components for vacuum drainage systems and for drainage
                                               systems on ships
361 186 12566 FprEN 12566-6                    Small wastewater treatment systems for up to 50 PT - Part 6:        5020 MDRT
                                               Prefabricated treatment units for septic tank effluent

362 186 13508 EN 13508-1:2012                  Investigation and assessment of drain and sewer systems             5020 MDRT
                                               outside buildings - Part 1: General Requirements

363 186 14654 FprEN 14654-2                    Management and control of cleaning operations in drains and         5020 MDRT
                                               sewers - Part 2: Rehabilitation
364 186 16323 prEN 16323                       Glossary of wastewater engineering terms                            4020 MDRT
365 186 16397 prEN 16397-1                     Flexible couplings - Part 1: Performance requirements               4020 MDRT
366 186 16397 prEN 16397-2                     Flexible couplings - Part 2: Materials and dimensions for           4020 MDRT
                                               metal banded flexible couplings
367 187    1317 CEN/TR 1317-6:2012             Road restraint systems - Part 6: Pedestrian restraint system -      5020 MDRT
                                               Pedestrian parapets
368 187    1317 CEN/TS 1317-8:2012             Road restraint systems - Part 8: Motorcycle road restraint          5020 MDRT
                                               systems which reduce the impact severity of motorcyclist
                                               collisions with safety barriers
369 187   1317 prEN 1317-4        Road restraint systems - Part 4: Performance classes,           4020 MDRT
                                  impact test acceptance criteria and test methods for
                                  transitions and removable barrier sections
370 187   1317 prEN 1317-7        Road restraint systems - Part 7: Performance classes,           4020 MDRT
                                  impact test acceptance criteria and test methods for
                                  terminals of safety barriers
371 187   1793 EN 1793-1:2012     Road traffic noise reducing devices - Test method for           5020 MDRT
                                  determining the acoustic performance - Part 1: Intrinsic
                                  characteristics of sound absorption
372 187   1793 EN 1793-2:2012     Road traffic noise reducing devices - Test method for           5020 MDRT
                                  determining the acoustic performance - Part 2: Intrinsic
                                  characteristics of airborne sound insulation under diffuse
                                  sound field conditions
373 187   1793 EN 1793-6:2012     Road traffic noise reducing devices - Test method for           5020 MDRT
                                  determining the acoustic performance - Part 6: Intrinsic
                                  characteristics - In situ values of airborne sound insulation
                                  under direct sound field conditions
374 187 12697 EN 12697-1:2012     Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  1: Soluble binder content
375 187 12697 EN 12697-11:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  11: Determination of the affinity between aggregate and
                                  bitumen
376 187 12697 EN 12697-19:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  19: Permeability of specimen
377 187 12697 EN 12697-20:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  20: Indentation using cube or cylindrical specimens (CY)

378 187 12697 EN 12697-21:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  21: Indentation using plate specimens
379 187 12697 EN 12697-24:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  24: Resistance to fatigue
380 187 12697 EN 12697-30:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  30: Specimen preparation by impact compactor
381 187 12697 EN 12697-34:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  34: Marshall test
382 187 12697 EN 12697-39:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  39: Binder content by ignition
383 187 12697 EN 12697-40:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  40: In situ drainability
384 187 12697 EN 12697-45:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part   5020 MDRT
                                  45: Saturation Ageing Tensile Stiffness (SATS) conditioning
                                  test
385 187 12697 EN 12697-46:2012    Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  46: Low temperature cracking and properties by uniaxial
                                  tension tests
386 187 12697 EN 12697-6:2012     Bituminous mixtures - Test methods for hot mix asphalt - Part 5020 MDRT
                                  6: Determination of bulk density of bituminous specimens

387 187 12697 FprEN 12697-42      Bituminous mixtures - test methods for hot mix asphalt - Part 5020 MDRT
                                  42: Amount of foreign matter in reclaimed asphalt
388 187 12697 prEN 12697-49       Bituminous mixtures - Test methods for hot mix asphalt - Part 4020 MDRT
                                  49: Determination of friction after polishing
389 187 13286 EN 13286-47:2012    Unbound and hydraulically bound mixtures - Part 47: Test      5020 MDRT
                                  method for the determination of California bearing ratio,
                                  immediate bearing index and linear swelling
390 187 13863 EN 13863-4:2012     Concrete pavements - Part 4: Test methods for the               5020 MDRT
                                  determination of wear resistance of concrete pavements to
                                  studded tyres
391 187 16165 CEN/TS 16165:2012   Determination of slip resistance of pedestrian surfaces -       5020 MDRT
                                  Methods of evaluation
392 187 16333 prEN 16333          Slurry surfacing - Specification for airfields                  4020 MDRT
393 240    40 FprEN 40-3-1        Lighting columns - Design and verification - Part 3-1:          5020 MDRT
                                  Specification for characteristic loads
394 240     40 FprEN 40-3-2            Lighting columns - Design and verification - Part 3-2:           5020 MDRT
                                       Verification by testing
395 240     40 FprEN 40-3-3            Lighting columns - Design and verification - Part 3-3:           5020 MDRT
                                       Verification by calculation
396 240 16237 FprEN 16237:2012         Classification of non-electrical sources of incoherent optical   5020 MDRT
                                       radiation
397 240 16268 FprEN 16268:2012         Perfomance of reflecting surfaces for luminaires                 5020 MDRT
398 240 16276 FprEN 16276:2012         Evacuation Lighting in Road Tunnels                              5020 MDRT
399 258 1927 EN ISO 1927-1:2012        Monolithic (unshaped) refractory products - Part 1:              5020 MDRT
                                       Introduction and classification (ISO 1927-1:2012)
400 258   1927 FprEN ISO 1927-2 rev    Monolithic (unshaped) refractory products - Part 2: Sampling     5020 MDRT
                                       for testing (ISO/FDIS 1927-2:2012)
401 258   1927 FprEN ISO 1927-3 rev    Monolithic (unshaped) refractory products - Part 3:              5020 MDRT
                                       Characterization as received (ISO/FDIS 1927-3:2012)
402 258   1927 FprEN ISO 1927-4 rev    Monolithic (unshaped) refractory products - Part 4:              5020 MDRT
                                       Determination of consistency of castables (ISO/FDIS 1927-
                                       4:2012)
403 258   1927 FprEN ISO 1927-5 rev    Monolithic (unshaped) refractory products - Part 5:              5020 MDRT
                                       Preparation and treatment of test pieces (ISO/FDIS 1927-
                                       5:2012)
404 258   1927 FprEN ISO 1927-6 rev    Monolithic (unshaped) refractory products - Part 6:              5020 MDRT
                                       Measurement of physical properties (ISO/FDIS 1927-6:2012)

405 258   1927 FprEN ISO 1927-7        Monolithic (unshaped) refractory products - Part 7: Tests on     5020 MDRT
                                       pre-formed shapes (ISO/FDIS 1927-7:2012)
406 258   1927 FprEN ISO 1927-8        Monolithic (unshaped) refractory products - Part 8:              5020 MDRT
                                       Determination of complementary properties (ISO/FDIS 1927-
                                       8:2012)
407 276 12999 prEN ISO 12999-1         Acoustics - Determination and application of measurement         4020 MDRT
                                       uncertainties in building acoustics - Part 1: Sound insulation
                                       (ISO/DIS 12999-1:2012)
408 276 16251 prEN ISO 16251-1         Acoustics - Laboratory measurement of the reduction of           4020 MDRT
                                       transmitted impact noise by floor coverings on a small floor
                                       mock-up - Part 1: Heavyweight compact floor (ISO/DIS
                                       16251-1:2012)
409 276 16283 prEN ISO 16283-1 rev     Acoustics - Field measurement of sound insulation in             4020 MDRT
                                       buildings and of building elements - Part 1: Airborne sound
                                       insulation (ISO/DIS 16283-1:2012)
410 281 10077 EN ISO 10077-2:2012      Thermal performance of windows, doors and shutters -             5020 MDRT
                                       Calculation of thermal transmittance - Part 2: Numerical
                                       method for frames (ISO 10077-2:2012)
411 281 12569 FprEN ISO 12569          Thermal performance of buildings and materials -                 5020 MDRT
                                       Determination of specific airflow rate in buildings - Tracer gas
                                       dilution method (ISO/FDIS 12569:2012)
412 281 12570 EN ISO 12570:2000/prA1   Hygrothermal performance of building materials and products 4020 MDRT
                                       - Determination of moisture content by drying at elevated
                                       temperature - Amendment 1 (ISO 12570:2000/DAM 1:2012)

413 281 12571 prEN ISO 12571 rev       Hygrothermal performance of building materials and products 4020 MDRT
                                       - Determination of hygroscopic sorption properties (ISO/DIS
                                       12571:2012)
414 281 12631 FprEN ISO 12631          Thermal performance of curtain walling - Calculation of          5020 MDRT
                                       thermal transmittance (ISO/FDIS 12631:2012)
415 281 13788 FprEN ISO 13788          Hygrothermal performance of building components and              5020 MDRT
                                       building elements - Internal surface temperature to avoid
                                       critical surface humidity and interstitial condensation -
                                       Calculation methods (ISO/FDIS 13788:2012)

416 281 13791 EN ISO 13791:2012        Thermal performance of buildings - Calculation of internal       5020 MDRT
                                       temperatures of a room in summer without mechanical
                                       cooling - General criteria and validation procedures (ISO
                                       13791:2012)
417 281 13792 EN ISO 13792:2012       Thermal performance of buildings - Calculation of internal      5020 MDRT
                                      temperatures of a room in summer without mechanical
                                      cooling - Simplified methods (ISO 13792:2012)

418 281 15601 CEN/TR 15601:2012       Hygrothermal performance of buildings - Resistance to wind - 5020 MDRT
                                      driven rain of roof coverings with discontinuously laid small
                                      elements - Test methods
419 281 15758 prEN ISO 15758          Hygrothermal performance of building equipment and                 4020 MDRT
                                      industrial installations - Calculation of water vapour diffusion -
                                      Cold pipe insulation systems (ISO/DIS 15758:2012)

420 302    253 EN 253:2009/FprA1      District heating pipes - Preinsulated bonded pipe systems for   5020 MDRT
                                      directly buried hot water networks - Pipe assembly of steel
                                      service pipe, polyurethane thermal insulation and outer
                                      casing of polyethylene
421 302   1264 EN 1264-2:2008/FprA1   Water based surface embedded heating and cooling               5020 MDRT
                                      systems - Part 2: Floor heating: Prove methods for the
                                      determination of the thermal output using calculation and test
                                      methods
422 302   9806 prEN ISO 9806          Solar energy - Solar thermal collectors - Test methods          4020 MDRT
                                      (ISO/DIS 9806:2012)
423 302 10121 prEN ISO 10121-1        Test method for assessing the performance of gas-phase air      4020 MDRT
                                      cleaning media and devices for general ventilation - Part 1:
                                      Gas-phase air cleaning media (ISO/DIS 10121-1:2012)

424 302 12599 EN 12599:2012           Ventilation for buildings - Test procedures and measurement     5020 MDRT
                                      methods to hand over air conditioning and ventilation
                                      systems
425 302 12828 FprEN 12828             Heating systems in buildings - Design for water-based           5020 MDRT
                                      heating systems
426 302 12976 prEN 12976-1            Thermal solar systems and components - Factory made             4020 MDRT
                                      systems - Part 1: General requirements
427 302 12976 prEN 12976-2            Thermal solar systems and components - Factory made             4020 MDRT
                                      systems - Part 2: Test methods
428 302 12977 EN 12977-1:2012         Thermal solar systems and components - Custom built             5020 MDRT
                                      systems - Part 1: General requirements for solar water
                                      heaters and combisystems
429 302 12977 EN 12977-2:2012         Thermal solar systems and components - Custom built             5020 MDRT
                                      systems - Part 2: Test methods for solar water heaters and
                                      combisystems
430 302 12977 EN 12977-3:2012         Thermal solar systems and components - Custom built             5020 MDRT
                                      systems - Part 3: Performance test methods for solar water
                                      heater stores
431 302 12977 EN 12977-4:2012         Thermal solar systems and components - Custom built             5020 MDRT
                                      systems - Part 4: Performance test methods for solar
                                      combistores
432 302 12977 EN 12977-5:2012         Thermal solar systems and components - Custom built             5020 MDRT
                                      systems - Part 5: Performance test methods for control
                                      equipment
433 302 13141 prEN 13141-8            Ventilation for buildings - Performance testing of              4020 MDRT
                                      components/products for residential ventilation - Part 8:
                                      Performance testing of un-ducted mechanical supply and
                                      exhaust ventilation units (including heat recovery) for
                                      mechanical ventilation systems intended for a single room


434 302 13142 FprEN 13142             Ventilation for buildings - Components/products for             5020 MDRT
                                      residential ventilation - Required and optional performance
                                      characteristics
435 302 14037 prEN 14037-1            Free hanging heating and cooling surfaces for water with a      4020 MDRT
                                      temperature below 120°C - Part 1: Technical specifications
                                      and requirements
436 302 14037 prEN 14037-2            Free hanging heating and cooling surfaces for water with a      4020 MDRT
                                      temperature below 120°C - Part 2: Test method for thermal
                                      output of ceiling mounted radiant panels
437 302 14037 prEN 14037-3         Free hanging heating and cooling surfaces for water with a        4020 MDRT
                                   temperature below 120°C - Part 3: Rating method and
                                   evaluation of radiant thermal output of ceiling mounted
                                   radiant panels
438 302 14037 prEN 14037-4         Free hanging heating and cooling surfaces for water with a        4020 MDRT
                                   temperature below 120 °C - Part 4: Test method for cooling
                                   capacity of ceiling mounted radiant panels
439 302 14037 prEN 14037-5         Free hanging heating and cooling surfaces for water with a        4020 MDRT
                                   temperature below 120°C - Part 5: Test method for thermal
                                   output of open or closed heated ceiling surfaces

440 302 16282 prEN 16282-9         Equipment for commercial kitchens - Components for                4020 MDRT
                                   ventilation in commercial kitchens - Part 9: Capture and
                                   containment performance of extraction systems - Test
                                   methods
441 302 16430 prEN 16430-1         Fan assisted radiators, convectors and trench convectors -        4020 MDRT
                                   Part 1: Technical specifications and requirements

442 302 16430 prEN 16430-2         Fan assisted radiators, convectors and trench convectors -        4020 MDRT
                                   Part 2: Test method and rating for thermal output

443 302 16430 prEN 16430-3         Fan assisted radiators, convectors and trench convectors -        4020 MDRT
                                   Part 3: Test method and rating for cooling capacity

444 302 16445 FprEN 16445:2012     Ventilation for buildings - Air diffusion - Aerodynamic testing   5020 MDRT
                                   and rating for mixed flow application: non-isothermal
                                   procedure for cold jet
445 318   1191 FprEN 1191          Windows and doors - Resistance to repeated opening and            5020 MDRT
                                   closing - Test method
446 318   1527 FprEN 1527:2012     Building hardware - Hardware for sliding doors and folding        5020 MDRT
                                   doors - Requirements and test methods
447 318   1906 EN 1906:2012        Building hardware - Lever handles and knob furniture -            5020 MDRT
                                   Requirements and test methods
448 318   1932 FprEN 1932          External blinds and shutters - Resistance to wind loads -         5020 MDRT
                                   Method of testing and performance criteria
449 318 12320 EN 12320:2012        Building hardware - Padlocks and padlock fittings -               5020 MDRT
                                   Requirements and test methods
450 318 12428 FprEN 12428          Industrial, commercial and garage doors - Thermal                 5020 MDRT
                                   transmittance - Requirements for the calculation
451 318 13120 EN 13120:2009/prA1   Internal blinds - Performance requirements including safety       4020 MDRT

452 318 13126 EN 13126-13:2012     Building hardware - Hardware for windows and balcony doors 5020 MDRT
                                   - Requirements and test methods - Part 13: Sash balances

453 318 13126 EN 13126-14:2012     Building hardware - Hardware for windows and balcony doors 5020 MDRT
                                   - Requirements and test methods - Part 14: Sash fasteners

454 318 13126 FprEN 13126-9        Building hardware - Hardware for windows and door height          5020 MDRT
                                   windows - Part 9: Hardware for horizontal and vertical pivot
                                   windows
455 318 13330 FprEN 13330          Shutters - Hard body impact and prevention of access - Test       5020 MDRT
                                   methods
456 318 15684 EN 15684:2012        Building hardware - Mechatronic cylinders - Requirements          5020 MDRT
                                   and test methods
457 318 16005 EN 16005:2012        Power operated pedestrian doorsets - Safety in use -              5020 MDRT
                                   Requirements and test methods
458 318 16035 FprEN 16035          Hardware performance sheet (HPS) - Identification and             5020 MDRT
                                   summary of test evidence to facilitate the inter-changeability
                                   of building hardware for application to fire resisting and/or
                                   smoke control doorsets and/or openable windows
459 318 16361 FprEN 16361                 Power operated pedestrian doors - Product standard,           4020 MDRT
                                          performance characteristics - Pedestrian doorsets, other than
                                          swing type, initially designed for installation with power
                                          operation without resistance to fire and smoke leakage
                                          characteristics
460 318 16433 prEN 16433                  Internal blinds - Protection from strangulation hazards - Test   4020 MDRT
                                          methods
461 318 16434 prEN 16434                  Internal blinds - Protection from strangulation hazards -        4020 MDRT
                                          Requirements and Test methods for safety devices
462 321       206 prEN 206                Concrete - Specification, performance, production and            4020 MDRT
                                          conformity
463 321       450 EN 450-1:2012           Fly ash for concrete - Part 1: Definition, specifications and    5020 MDRT
                                          conformity criteria
464 321       480 EN 480-8:2012           Admixtures for concrete, mortar and grout - Test methods -       5020 MDRT
                                          Part 8: Determination of the conventional dry material
                                          content
465 321       480 FprEN 480-15            Admixtures for concrete, mortar and grout - Test methods -       4020 MDRT
                                          Part 15: Reference concrete and method for testing viscosity
                                          modifying admixtures
466 321       934 EN 934-2:2009/FprA1     Admixtures for concrete, mortar and grout - Part 2: Concrete     5020 MDRT
                                          admixtures - Definitions, requirements, conformity, marking
                                          and labelling
467 321       934 EN 934-3:2009/FprA1     Admixtures for concrete, mortar and grout - Part 3:              5020 MDRT
                                          Admixtures for masonry mortar - Definitions, requirements,
                                          conformity and marking and labelling
468 321      1504 FprEN 1504-5            Products and systems for the protection and repair of            5020 MDRT
                                          concrete structures - Definitions, requirements, quality
                                          control and evaluation of conformity - Part 5: Concrete
                                          injection
469 321      1744 EN 1744-1:2009/FprA1    Tests for chemical properties of aggregates - Part 1:            5020 MDRT
                                          Chemical analysis
470 321      1744 EN 1744-8:2012          Tests for chemical properties of aggregates - Part 8: Sorting    5020 MDRT
                                          test to determine metal content of Municipal Incinerator
                                          Bottom Ash (MIBA) Aggregates
471 321 12390 EN 12390-1:2012             Testing hardened concrete - Part 1: Shape, dimensions and        5020 MDRT
                                          other requirements for specimens and moulds
472 321 12390 prEN 12390-13               Testing hardened concrete - Part 13: Determination of secant     4020 MDRT
                                          modulus of elasticity in compression
473 321 12504 EN 12504-2:2012             Testing concrete in structures - Part 2: Non-destructive         5020 MDRT
                                          testing - Determination of rebound number
474 321 13055 prEN 13055                  Lightweight aggregates for concrete, mortar, grout,              4020 MDRT
                                          bituminous mixtures, surface treatments and for unbound
                                          and bound applications
475   321   13369   FprEN 13369           Common rules for precast concrete products                       5020   MDRT
476   321   13450   FprEN 13450           Aggregates for railway ballast                                   5020   MDRT
477   321   14992   EN 14992:2007/FprA1   Precast concrete products - Wall elements                        5020   MDRT
478   321   15037   FprEN 15037-5         Precast concrete products - Beam-and-block floor systems -       5020   MDRT
                                          Part 5: Lightweight blocks for simple formwork

479 321 16236 FprEN 16236:2012            Evaluation of Conformity (EoC) of Aggregates - Factory           5020 MDRT
                                          Production Control
480 321 16349 CEN/TR 16349:2012           Framework for a specification on the avoidance of a              5020 MDRT
                                          damaging Alkali-Silica Reaction (ASR) in concrete
481 321 16369 CEN/TR 16369:2012           Use of control charts in the production of concrete              5020 MDRT
482 321 16443 FprCEN/TR 16443             Backgrounds to the revision of EN 450-1:2005+A1:2007 - Fly       5020 MDRT
                                          ash for concrete
483 326       336 prEN 336                Structural timber - Sizes, permitted deviations                  4020 MDRT
484 326       408 EN 408:2010/FprA1       Timber structures - Structural timber and glued laminated        5020 MDRT
                                          timber - Determination of some physical and mechanical
                                          properties.
485 326      1912 EN 1912:2012            Structural Timber - Strength classes - Assignment of visual      5020 MDRT
                                          grades and species
486 326 14081 EN 14081-2:2010/FprA1     Timber structures - Strength graded structural timber with       5020 MDRT
                                        rectangular cross section - Part 2: Machine grading -
                                        Additional requirements for initial type testing
487 326 14081 prEN 14081-1 rev          Timber structures - Strength graded structural timber with       4020 MDRT
                                        rectangular cross section - Part 1: General requirements

488 326 14592 EN 14592:2008/FprA1       Timber structures - Dowel-type fasteners - Requirements          5020 MDRT

489 326 15497 prEN 15497                Structural finger jointed solid timber - Performance             4020 MDRT
                                        requirements and minimum production requirements
490 326 16351 prEN 16351                Timber structures - Cross laminated timber - Requirements        4020 MDRT

491 335   6927 EN ISO 6927:2012         Buildings and civil engineering works - Sealants - Vocabulary 5020 MDRT
                                        (ISO 6927:2012)
492 335 14383 FprCEN/TR 14383-4         Prevention of crime - Urban planning and building design -    5020 MDRT
                                        Part 4: Shops and offices
493 335 15651 EN 15651-1:2012           Sealants for non-structural use in joints in buildings and    5020 MDRT
                                        pedestrian walkways - Part 1: Sealants for facade elements

494 335 15651 EN 15651-2:2012           Sealants for non-structural use in joints in buildings and       5020 MDRT
                                        pedestrian walkways - Part 2: Sealants for glazing
495 335 15651 EN 15651-3:2012           Sealants for non-structural use in joints in buildings and       5020 MDRT
                                        pedestrian walkways - Part 3: Sealants for sanitary joints

496 335 15651 EN 15651-4:2012           Sealants for non-structural use in joints in buildings and       5020 MDRT
                                        pedestrian walkways - Part 4: Sealants for pedestrian
                                        walkways
497 335 15651 EN 15651-5:2012           Sealants for non-structural use in joints in buildings and       5020 MDRT
                                        pedestrian walkways - Part 5: Evaluation of conformity and
                                        marking
498 343   1996 EN 1996-1-1:2005/FprA1   Eurocode 6: Design of masonry structures - Part 1-1:             5020 MDRT
                                        General rules for reinforced and unreinforced masonry
                                        structures
499 343   1998 EN 1998-1:2004/FprA1     Eurocode 8: Design of structures for earthquake resistance -     5020 MDRT
                                        Part 1: General rules, seismic actions and rules for buildings

500 346 50536 EN 50536:2011/AA:201X     Protection against lightning - Thunderstorm warning systems      5020 MDRT

501 346 62305 EN 62305-2:2012           Protection against lightning -- Part 2: Risk management          5020 MDRT
502 346 62561 EN 62561-1:2012           Lightning Protection System Components (LPSC) -- Part 1:         5020 MDRT
                                        Requirements for connection components
503 346 62561 EN 62561-2:2012           Lightning Protection System Components (LPSC) -- Part 2:         5020 MDRT
                                        Requirements for conductors and earth electrodes
504 346 62561 EN 62561-3:2012           Lightning Protection System Components (LPSC) -- Part 3:         5020 MDRT
                                        Requirements for isolating spark gaps
505 346 62561 FprEN 62561-              Lightning Protection System Components (LPSC) -- Part 1:         5020 MDRT
              1:2011/FprAA:2012         Requirements for connection components
506 346 62561 FprEN 62561-              Lightning Protection System Components (LPSC) -- Part 2:         5020 MDRT
              2:2011/FprAA:2012         Requirements for conductors and earth electrodes
507 346 62561 FprEN 62561-              Lightning Protection System Components (LPSC) -- Part 3:         5020 MDRT
              3:2011/FprAA:2012         Requirements for isolating spark gaps
508 347   846 EN 846-14:2012            Methods of test for ancillary components for masonry - Part      5020 MDRT
                                        14: Determination of the initial shear strength between the
                                        prefabricated part of a composite lintel and the masonry
                                        above it
509 347    846 EN 846-5:2012            Methods of test for ancillary components for masonry - Part      5020 MDRT
                                        5: Determination of tensile and compressive load capacity
                                        and load displacement characteristics of wall ties (couplet
                                        test)
510 347    846 EN 846-6:2012            Methods of test for ancillary components for masonry - Part      5020 MDRT
                                        6: Determination of tensile and compressive load capacity
                                        and load displacement characteristics of wall ties (single end
                                        test)
511 347    846 EN 846-7:2012           Methods of test for ancillary components for masonry - Part        5020 MDRT
                                       7: Determination of shear load capacity and load
                                       displacement characteristics of shear ties and slip ties
                                       (couplet test for mortar joint connections)
512 347   1745 EN 1745:2012            Masonry and masonry products - Methods for determining             5020 MDRT
                                       thermal properties
513 347 13084 FprEN 13084-7            Free-standing chimneys - Part 7: Product specifications of         5020 MDRT
                                       cylindrical steel fabrications for use in single wall steel
                                       chimneys and steel liners
514 347 14241 prEN 14241-1             Chimneys - Elastomeric seals and elastomeric sealants -            4020 MDRT
                                       Material requirements and test methods - Part 1: Seals in
                                       flue liners
515 347 14471 prEN 14471               Chimneys - System chimneys with plastic flue liners -              4020 MDRT
                                       Requirements and test methods
516 361   1537 EN 1537:2012            Execution of special geotechnical work - Ground anchors            5020 MDRT

517 361 22282 EN ISO 22282-1:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 1: General rules (ISO 22282-1:2012)
518 361 22282 EN ISO 22282-2:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 2: Water permeability tests in a borehole using open
                                       systems (ISO 22282-2:2012)
519 361 22282 EN ISO 22282-3:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 3: Water pressure tests in rock (ISO 22282-3:2012)

520 361 22282 EN ISO 22282-4:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 4: Pumping tests (ISO 22282-4:2012)
521 361 22282 EN ISO 22282-5:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 5: Infiltrometer tests (ISO 22282-5:2012)
522 361 22282 EN ISO 22282-6:2012      Geotechnical investigation and testing - Geohydraulic testing - 5020 MDRT
                                       Part 6: Water permeability tests in a borehole using closed
                                       systems (ISO 22282-6:2012)
523 361 22476 EN ISO 22476-1:2012      Geotechnical investigation and testing - Field testing - Part 1:   5020 MDRT
                                       Electrical cone and piezocone penetration test (ISO 22476-
                                       1:2012)
524 361 22476 FprEN ISO 22476-4        Geotechnical investigation and testing - Field testing - Part 4:   5020 MDRT
                                       Ménard pressuremeter test (ISO/FDIS 22476-4:2012)

525 361 22476 FprEN ISO 22476-5        Geotechnical investigation and testing - Field testing - Part 5:   5020 MDRT
                                       Flexible dilatometer test (ISO/FDIS 22476-5:2012)

526 361 22476 FprEN ISO 22476-7        Geotechnical investigation and testing - Field testing - Part 7:   5020 MDRT
                                       Borehole jack test (ISO/FDIS 22476-7:2012)
527 363 16384 CEN/TS 16384:2012        Synthetic sport systems - Leaching test                            5020 MDRT
528 364 10772 EN ISO 10772:2012        Geotextiles - Test method for the determination of the             5020 MDRT
                                       filtration behaviour of geotextiles under turbulent water flow
                                       conditions (ISO 10772:2012)
529 364 10776 EN ISO 10776:2012        Geotextiles and geotextile-related products - Determination        5020 MDRT
                                       of water permeability characteristics normal to the plane,
                                       under load (ISO 10776:2012)
530 364 14574 prEN 14574 rev           Geosynthetics - Determination of the pyramid puncture              4020 MDRT
                                       resistance of supported geosynthetics
531 364 16416 prEN 16416               Geosynthetic clay barriers - Determination of water flux index     4020 MDRT
                                       - Flexible wall permeameter method at constant head

532 365 15221 EN 15221-7:2012          Facility Management - Part 7: Guidelines for Performance           5020 MDRT
                                       Benchmarking
533   1 60034 EN 60034-18-34:2012      Rotating electrical machines -- Part 18-34: Functional             5020 MECMA
                                       evaluation of insulation systems - Test procedures for form-
                                       wound windings - Evaluation of thermomechanical
                                       endurance of insulation systems
534   1 60034 FprEN 60034-18-21:2012   Rotating electrical machines -- Part 18-21: Functional             5020 MECMA
                                       evaluation of insulation systems - Test procedures for wire-
                                       wound windings - Thermal evaluation and classification
535   1 60034 FprEN 60034-18-41:2012           Rotating electrical machines -- Part 18-41: Qualification and       5020 MECMA
                                               quality control tests for partial discharge free (Type I)
                                               electrical insulation systems used in rotating electrical
                                               machines fed from voltage converters
536   1 60034 FprEN 60034-28:2012              Rotating electrical machines -- Part 28: Test methods for        5020 MECMA
                                               determining quantities of equivalent circuit diagrams for three-
                                               phase low-voltage cage induction motors
537   1 60034 FprEN 60034-28:2012              Rotating electrical machines -- Part 28: Test methods for        5020 MECMA
                                               determining quantities of equivalent circuit diagrams for three-
                                               phase low-voltage cage induction motors
538   2 60848 FprEN 60848:2011                 GRAFCET specification language for sequential function              5020 MECMA
                                               charts
539   2 61360 FprEN 61360-2:2011               Standard data element types with associated classification          5020 MECMA
                                               scheme for electric components -- Part 2: EXPRESS
                                               dictionary schema
540   2 62656 FprEN 62656-1:201X               Standardized product ontology register and transfer by              5020 MECMA
                                               spreadsheets -- Part 1: Logical structure for data parcels

541   2 82079 EN 82079-1:2012                  Preparation of instructions for use - Structuring, content and      5020 MECMA
                                               presentation -- Part 1: General principles and detailed
                                               requirements
542   3 60076 FprEN 60076-14:2012              Power transformers -- Part 14: Liquid-immersed power                5020 MECMA
                                               transformers using high-temperature insulation materials

543   3 60076 FprEN 60076-3:2012               Power transformers -- Part 3: Insulation levels, dielectric    5020 MECMA
                                               tests and external clearances in air
544   5 60216 FprEN 60216-1:2012               Electrical insulating materials - Thermal endurance            5020 MECMA
                                               properties -- Part 1: Ageing procedures and evaluation of test
                                               results
545   5 60216 FprEN 60216-8:2012               Electrical insulating materials - Thermal endurance                 5020 MECMA
                                               properties -- Part 8: Instructions for calculating thermal
                                               endurance characteristics using simplified procedures
546   5 60243 FprEN 60243-1:2011               Electrical strength of insulating materials - Test methods --       5020 MECMA
                                               Part 1: Tests at power frequencies
547   5 60455 FprEN 60455-3-8:201X             Resin based reactive compounds used for electrical                  5020 MECMA
                                               insulation -- Part 3: Specifications for individual materials --
                                               Sheet 8: Resinous compounds for cable accessories

548   5 60493 prEN 60493-1                     Guide for the statistical analysis of ageing test data -- Part 1:   1520 MECMA
                                               Methods based on mean values of normally distributed test
                                               results
549   5 60626 EN 60626-3:2008/A1:2012          Combined flexible materials for electrical insulation -- Part 3:    5020 MECMA
                                               Specifications for individual materials
550   5 60684 FprEN 60684-3-214:2012           Flexible insulating sleeving -- Part 3: Specifications for          5020 MECMA
                                               individual types of sleeving - Sheet 214: Heat-shrinkable,
                                               polyolefin sleeving, not flame retarded, thick and medium
                                               wall
551   5 60893 EN 60893-3-4:2004/FprA1:2012 Insulating materials - Industrial rigid laminated sheets based          5020 MECMA
                                           on thermosetting resins for electrical purposes -- Part 3-4:
                                           Specifications for individual materials - Requirements for
                                           rigid laminated sheets based on phenolic resins


552   5 61212 FprEN 61212-3-2:201X             Insulating materials - Industrial rigid round laminated tubes       5020 MECMA
                                               and rods based on thermosetting resins for electrical
                                               purposes -- Part 3: Specifications for individual materials --
                                               Sheet 2: Round laminated moulded tubes


553   5 62068 FprEN 62068:2011                 Electrical insulation materials and systems - General method        5020 MECMA
                                               of evaluation of electrical endurance under repetitive voltage
                                               impulses
554   5 62677 FprEN 62677-1:2012               Heat shrinkable low and medium voltage moulded shapes --            5020 MECMA
                                               Part 1: General requirements
555   8 61869 FprEN 61869-4:2012               Instrument transformers -- Part 4: Combined transformers            5020 MECMA
556   8 62271 EN 62271-                       High-voltage switchgear and controlgear -- Part 100:             5020 MECMA
              100:2009/FprA1:2012             Alternating-current circuit-breakers
557   8 62271 EN 62271-                       High-voltage switchgear and controlgear -- Part 102:             5020 MECMA
              102:2002/FprA2:2011             Alternating current disconnectors and earthing switches

558   8 62271 EN 62271-107:2012               High-voltage switchgear and controlgear -- Part 107:             5020 MECMA
                                              Alternating current fused circuit-switchers for rated voltages
                                              above 1 kV up to and including 52 kV
559   8 62271 EN 62271-                       High-voltage switchgear and controlgear -- Part 109:             5020 MECMA
              109:2009/FprA1:2012             Alternating-current series capacitor by-pass switches
560   8 62271 EN 62271-207:2012               High-voltage switchgear and controlgear -- Part 207: Seismic     5020 MECMA
                                              qualification for gas-insulated switchgear assemblies for
                                              rated voltages above 52 kV
561   8 62271 FprEN 62271-101:2012            High-voltage switchgear and controlgear -- Part 101:             5020 MECMA
                                              Synthetic testing
562   8 62271 FprEN 62271-105:2012            High-voltage switchgear and controlgear -- Part 105:             5020 MECMA
                                              Alternating current switch-fuse combinations for rated
                                              voltages above 1 kV up to and including 52 kV
563   8 62271 FprEN 62271-110:2012            High-voltage switchgear and controlgear -- Part 110:             5020 MECMA
                                              Inductive load switching
564   8 62271 FprEN 62271-112:2012            High-voltage switchgear and controlgear -- Part 112:             5020 MECMA
                                              Alternating current high-speed earthing switches for
                                              secondary arc extinction on transmission lines
565   8 62271 FprEN 62271-201:2012            High-voltage switchgear and controlgear -- Part 201: AC          5020 MECMA
                                              solid-insulated enclosed switchgear and controlgear for rated
                                              voltages above 1 kV and up to and including 52 kV

566   8 62271 FprEN 62271-202:2012            High-voltage switchgear and controlgear -- Part 202: High        5020 MECMA
                                              voltage/low voltage prefabricated substation
567   8 62271 FprEN 62271-4:2012              High-voltage switchgear and controlgear -- Part 4: Handling      5020 MECMA
                                              procedures for sulphur hexafluoride (SF6)
568   9 60947 EN 60947-2:2006/FprA2:2012      Low-voltage switchgear and controlgear -- Part 2: Circuit-       5020 MECMA
                                              breakers
569   9 60947 EN 60947-3:2009/A1:2012         Low-voltage switchgear and controlgear -- Part 3: Switches,      5020 MECMA
                                              disconnectors, switch-disconnectors and fuse-combination
                                              units
570   9 60947 EN 60947-4-1:2010/A1:2012       Low-voltage switchgear and controlgear -- Part 4-1:              5020 MECMA
                                              Contactors and motor-starters - Electromechanical
                                              contactors and motor-starters
571   9 60947 EN 60947-5-                     Low-voltage switchgear and controlgear -- Part 5-5: Control      5020 MECMA
              5:1997/FprAA:2012               circuit devices and switching elements - Electrical
                                              emergency stop device with mechanical latching function

572   9 60947 EN 60947-6-1:2005/FprA1:2012 Low-voltage switchgear and controlgear -- Part 6-1: Multiple        5020 MECMA
                                           function equipment - Transfer switching equipment

573   9 60947 FprEN 60947-5-3:2012            Low-voltage switchgear and controlgear -- Part 5-3: Control      5020 MECMA
                                              circuit devices and switching elements - Requirements for
                                              proximity devices with defined behaviour under fault
                                              conditions (PDDB)
574   9 60947 FprEN 60947-7-4:2012            Low-voltage switchgear and controlgear -- Part 7-4: Ancillary    5020 MECMA
                                              equipment - PCB terminal blocks for copper conductors

575   9 61439 EN 61439-3:2012                 Low-voltage switchgear and controlgear assemblies -- Part 3: 5020 MECMA
                                              Distribution boards intended to be operated by ordinary
                                              persons (DBO)
576   9 61439 EN 61439-6:2012                 Low-voltage switchgear and controlgear assemblies -- Part 6: 5020 MECMA
                                              Busbar trunking systems (busways)
577   9 61439 FprEN 61439-4:2012              Low-voltage switchgear and controlgear assemblies -- Part 4: 5020 MECMA
                                              Assemblies for construction sites (ACS)
578    9 61439 FprEN 61439-7:2011           Low-voltage switchgear and controlgear assemblies -- Part 7: 5020 MECMA
                                            Assemblies for specific installations at public sites such as
                                            marinas, camping sites, market squares and similar
                                            applications and for charging stations for electrical vehicles


579    9 62026 FprEN 62026-2:2012           Low-voltage switchgear and controlgear - Controller-device        5020 MECMA
                                            interfaces (CDIs) -- Part 2: Actuator sensor interface (AS-i)

580    9 62026 FprEN 62026-7:2012           Low-voltage switchgear and controlgear - Controller-device        5020 MECMA
                                            interfaces (CDIs) -- Part 7: CompoNet
581    9 62683 FprEN 62683:2011             Low-voltage switchgear and controlgear - Product data and         5020 MECMA
                                            properties for information exchange
582   11 50085 EN 50085-1:2005/FprA1:2012   Cable trunking systems and cable ducting systems for              4020 MECMA
                                            electrical installations -- Part 1: General requirements
583   11 60309 EN 60309-1:1999/A2:2012      Plugs, socket-outlets and couplers for industrial purposes --     5020 MECMA
                                            Part 1: General requirements
584   11 60309 EN 60309-2:1999/A2:2012      Plugs, socket-outlets and couplers for industrial purposes --     5020 MECMA
                                            Part 2: Dimensional interchangeability requirements for pin
                                            and contact-tube accessories
585   11 60309 EN 60309-4:2007/A1:2012      Plugs, socket-outlets and couplers for industrial purposes --     5020 MECMA
                                            Part 4: Switched socket-outlets and connectors with or
                                            without interlock
586   11 60669 FprEN 60669-2-5:201X         Switches for household and similar fixed electrical               5020 MECMA
                                            installations -- Part 2-5: Switches and related accessories for
                                            use in home and building electronic systems (HBES)

587   11 60669 FprEN 60669-2-               Switches for household and similar fixed electrical               5020 MECMA
               5:201X/FprAA:201X            installations -- Part 2-5: Switches and related accessories for
                                            use in home and building electronic systems (HBES)

588   11 60670 EN 60670-1:2005/FprA1:2012   Boxes and enclosures for electrical accessories for               5020 MECMA
                                            household and similar fixed electrical installations -- Part 1:
                                            General requirements
589   11 60898 EN 60898-1:2003/A13:2012     Electrical accessories - Circuit breakers for overcurrent         5020 MECMA
                                            protection for household and similar installations -- Part 1:
                                            Circuit-breakers for a.c. operation
590   11 60934 EN 60934:2001/FprA2:2012     Circuit-breakers for equipment (CBE)                              5020 MECMA
591   11 60934 EN 60934:2001/FprA2:2012     Circuit-breakers for equipment (CBE)                              5020 MECMA
592   11 61008 EN 61008-1:201X              Residual current operated circuit-breakers without integral       5020 MECMA
                                            overcurrent protection for household and similar uses
                                            (RCCBs) -- Part 1: General rules
593   11 61009 EN 61009-1:201X              Residual current operated circuit-breakers with integral          5020 MECMA
                                            overcurrent protection for household and similar uses
                                            (RCBOs) -- Part 1: General rules
594   11 61386 EN 61386-1:2008/FprA1:2012   Conduit systems for cable management -- Part 1: General           5020 MECMA
                                            requirements
595   11 61534 FprEN 61534-21:2012          Powertrack systems -- Part 21: Particular requirements for        5020 MECMA
                                            powertrack systems intended for wall and ceiling mounting

596   11 61535 EN 61535:2009/A1:201X        Installation couplers intended for permanent connection in        5020 MECMA
                                            fixed installations
597   11 62196 EN 62196-1:2012/FprAA:2012   Plugs, socket-outlets, vehicle connectors and vehicle inlets -    5020 MECMA
                                            Conductive charging of electric vehicles -- Part 1: General
                                            requirements
598   11 62196 EN 62196-2:2012/FprAA:2012   Plugs, socket-outlets, vehicle connectors and vehicle inlets -    5020 MECMA
                                            Conductive charging of electric vehicles -- Part 2:
                                            Dimensional compatibility and interchangeability
                                            requirements for a.c. pin and contact-tube accessories
599   11 62423 EN 62423:201X                Type F and type B residual current operated circuit-breakers 5020 MECMA
                                            with and without integral overcurrent protection for household
                                            and similar uses
600   11 62606 FprEN 62606:2012             General requirements for Arc Fault Detection Devices              5020 MECMA
                                            (AFDD)
601   12 60127 EN 60127-4:2005/FprA2:2012      Miniature fuses -- Part 4: Universal modular fuse-links (UMF)      5020 MECMA
                                               - Through-hole and surface mount types
602   12 60127 FprEN 60127-7:2012              Miniature fuses -- Part 7: Miniature fuse-links for special        5020 MECMA
                                               applications
603   12 60269 FprHD 60269-2:2012              Low-voltage fuses -- Part 2: Supplementary requirements for        5020 MECMA
                                               fuses for use by authorized persons (fuses mainly for
                                               industrial application) - Examples of standardized systems of
                                               fuses A to K
604   12 60269 HD 60269-3:2010/FprA1:2012      Low-voltage fuses -- Part 3: Supplementary requirements for        5020 MECMA
                                               fuses for use by unskilled persons (fuses mainly for
                                               household and similar applications) - Examples of
                                               standardized systems of fuses A to F
605   12 60549 FprEN 60549:2012                High-voltage fuses for the external protection of shunt            5020 MECMA
                                               capacitors
606   15 60507 FprEN 60507:2012                Artificial pollution tests on high-voltage ceramic and glass       5020 MECMA
                                               insulators to be used on a.c. systems
607   16 60846 prEN 60846-1                    Radiation protection instrumentation - Ambient and/or              1520 MECMA
                                               directional dose equivalent (rate) meters and/or monitors for
                                               beta, X and gamma radiation -- Part 1: Portable workplace
                                               and environmental meters and monitors

608   16 61513 FprEN 61513:2012                Nuclear power plants - Instrumentation and control important       5020 MECMA
                                               to safety - General requirement for systems
609   16 61526 FprEN 61526:2012                Radiation protection instrumentation - Measurement of              5020 MECMA
                                               personal dose equivalents Hp(10) and Hp(0,07) for X,
                                               gamma, neutron and beta radiations - Direct reading
                                               personal dose equivalent meters
610   16 61772 FprEN 61772:2012                Nuclear power plants - Control rooms - Application of visual 5020 MECMA
                                               display units (VDUs)
611   16 62598 prEN 62598                      Nuclear instrumentation - Constructional requirements and    1520 MECMA
                                               classification of radiometric gauges
612   17 60191 FprEN 60191-6-22:2011           Mechanical Standardization Of Semiconductor Devices --       5020 MECMA
                                               Part 6-22: General rules for the preparation of outline
                                               drawings of surface mounted semiconductor device
                                               packages - Design guide for semiconductor packages Silicon
                                               Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid
                                               Array (S-FBGA and S-FLGA)
613   17 60191 FprEN 60191-6-5:2012            Mechanical standardization of semiconductor devices -- Part        5020 MECMA
                                               6-5: General rules for the preparation of outline drawings of
                                               surface mounted semiconductor device packages - Design
                                               guide for fine-pitch ball grid array (FBGA)


614   17 60749 EN 60749-27:2006/FprA1:2012 Semiconductor devices - Mechanical and climatic test                   5020 MECMA
                                           methods -- Part 27: Electrostatic discharge (ESD) sensitivity
                                           testing - Machine model (MM)
615   17 60749 EN 60749-27:2006/FprA1:2012 Semiconductor devices - Mechanical and climatic test                   5020 MECMA
                                           methods -- Part 27: Electrostatic discharge (ESD) sensitivity
                                           testing - Machine model (MM)
616   17 61747 EN 61747-30-1:2012              Liquid crystal display devices -- Part 30-1: Measuring             5020 MECMA
                                               methods for liquid crystal display modules - Transmissive
                                               type
617   17 61747 FprEN 61747-2-1:2012            Liquid crystal display devices -- Part 2-1: Passive matrix         5020 MECMA
                                               monochrome LCD modules - Blank detail specification

618   17 61747 FprEN 61747-4:2011              Liquid crystal display devices -- Part 4: Liquid crystal display   5020 MECMA
                                               modules and cells - Essential ratings and characteristics

619   17 61747 FprEN 61747-40-1:2011           Liquid crystal display devices -- Part 40-1: Mechanical testing 5020 MECMA
                                               guidelines for display cover glass for mobile devices

620   17 61988 EN 61988-2-1:2012               Plasma display panels -- Part 2-1: Measuring methods -             5020 MECMA
                                               Optical and optoelectrical
621   17 61988 EN 61988-2-5:2012               Plasma display panels -- Part 2-5: Measuring methods -             5020 MECMA
                                               Acoustic noise
622   17 61988 FprEN 61988-4-2:2012    Plasma Display Panels -- Part 4-2: Environmental testing         5020 MECMA
                                       mathods - Panel strength
623   17 62047 EN 62047-13:2012        Semiconductor devices - Micro-electromechanical devices --       5020 MECMA
                                       Part 13: Bend- and shear- type test methods of measuring
                                       adhesive strength for MEMS structures
624   17 62047 EN 62047-14:2012        Semiconductor devices - Micro-electromechanical devices --       5020 MECMA
                                       Part 14: Forming limit measuring method of metallic film
                                       materials
625   17 62047 FprEN 62047-11:2011     Semiconductor devices - Microelectromechanical devices --        5020 MECMA
                                       Part 11: Test method for linear thermal expansion
                                       coefficients of freestanding MEMS materials
626   17 62047 FprEN 62047-18:2012     Semiconductor devices - Micro-electromechanical devices --       5020 MECMA
                                       Part 18: Bend testing methods of thin film materials

627   17 62047 FprEN 62047-19:2012     Semiconductor devices - Micro-electromechanical devices -- 5020 MECMA
                                       Part 19: Electronic compasses
628   17 62215 FprEN 62215-3:2012      Integrated circuits - Measurement of impulse immunity -- Part 5020 MECMA
                                       3: Non-synchronous transient injection method
629   17 62341 EN 62341-6-2:2012       Organic light emitting diode (OLED) displays -- Part 6-2:     5020 MECMA
                                       Measuring methods of visual quality and ambient
                                       performance
630   17 62341 FprEN 62341-5-3:2012    Organic light emitting diode (OLED) displays -- Part 5-3:        5020 MECMA
                                       Measuring methods of image sticking and lifetime
631   17 62483 FprEN 62483:2012        Environmental acceptance requirements for tin whisker            5020 MECMA
                                       susceptibility of tin and tin alloy surface finishes
632   17 62595 FprEN 62595-1-1:2012    LCD Backlight Unit -- Part 1-1: Generic specification            5020 MECMA
633   17 62595 FprEN 62595-2:2012      LCD backlight unit -- Part 2: Electro-optical measurement        5020 MECMA
                                       methods of LED backlight unit for liquid crystal displays

634   17 62629 FprEN 62629-1-2:2012    3D Display devices -- Part 1-2: Generic - Terminology and        5020 MECMA
                                       letter symbols
635   17 62629 FprEN 62629-22-1:2011   3D Display Devices -- Part 22-1: Measuring methods for           5020 MECMA
                                       Autostereoscopic displays - Optical
636   17 62679 FprEN 62679-3-2:2012    Electronic paper display -- Part 3-2: Measuring methods -        5020 MECMA
                                       Electro-optical
637   18 60679 FprEN 60679-3:2012      Quartz crystal controlled oscillators of assessed quality --     5020 MECMA
                                       Part 3: Standard outlines and lead connections

638   18 62276 FprEN 62276:2012        Single crystal wafers for surface acoustic wave (SAW)            5020 MECMA
                                       devices applications - Specifications and measuring method

639   19 16212 EN 16212:2012           Energy Efficiency and Savings Calculation, Top-down and          5020 MECMA
                                       Bottom-up Methods
640   19 16231 EN 16231:2012           Energy efficiency benchmarking methodology                       5020 MECMA
641   19 16247 EN 16247-1:2012         Energy audits - Part 1: General requirements                     5020 MECMA
642   19 50574 EN 50574:2012           Collection, logistics & treatment requirements for end-of-life   5020 MECMA
                                       household appliances containing volatile fluorocarbons or
                                       volatile hydrocarbons
643   19 50581 EN 50581:2012           Technical documentation for the assessment of electrical         5020 MECMA
                                       and electronic products with respect to the restriction of
                                       hazardous substances
644   19 60068 FprEN 60068-2-78:2012   Environmental testing -- Part 2-78: Tests - Test Cab: Damp       5020 MECMA
                                       heat, steady state
645   19 60721 FprEN 60721-2-2:2012    Classification of environmental conditions -- Part 2-2:          5020 MECMA
                                       Environmental conditions appearing in nature -- Precipitation
                                       and wind
646   19 62321 FprEN 62321-1:2011      Determination of certain substances in electrotechnical          5020 MECMA
                                       products -- Part 1: Introduction and overview
647   19 62321 FprEN 62321-2:2011      Determination of certain substances in electrotechnical          5020 MECMA
                                       products -- Part 2: Disassembly, disjunction and mechanical
                                       sample preparation
648   19 62321 FprEN 62321-3-1:2011            Determination of certain substances in electrotechnical            5020 MECMA
                                               products -- Part 3-1: Screening electrotechnical products for
                                               lead, mercury, cadmium, total chromium and total bromine
                                               using X-ray Fluorescence Spectrometry


649   19 62321 FprEN 62321-3-2:2011            Determination of certain substances in electrotechnical            5020 MECMA
                                               products -- Part 3-2: Screening of total bromine in electric
                                               and electronic products by combustion-ion chromatography
                                               (C-IC)
650   19 62321 FprEN 62321-4:2011              Determination of certain substances in electrotechnical            5020 MECMA
                                               products -- Part 4: Determination of mercury in polymers,
                                               metals and electronics by CV-AAS, CV-AFS, ICP-OES and
                                               ICP-MS
651   19 62321 FprEN 62321-5:2011              Determination of certain substances in electrotechnical            5020 MECMA
                                               products -- Part 5: Determination of cadmium, lead and
                                               chromium in polymers and electronics, and cadmium and
                                               lead in metals by AAS, AFS, ICP-OES and ICP-MS
652   19 62474 EN 62474:2012                   Material declaration for products of and for the                   5020 MECMA
                                               electrotechnical industry
653   20 60404 FprEN 60404-11:2012             Magnetic materials -- Part 11: Method of test for the              5020 MECMA
                                               determination of surface insulation resistance of magnetic
                                               sheet and strip
654   20 60404 FprEN 60404-15:2012             Magnetic materials -- Part 15: Methods for the determination       5020 MECMA
                                               of the relative magnetic permeability of feebly magnetic
                                               materials
655   20 62358 FprEN 62358:2012                Ferrite cores - Standard inductance factor for gapped cores  5020 MECMA
                                               and its tolerance
656   20 62674 FprEN 62674-1:2012              High frequency inductive components -- Part 1: Fixed surface 5020 MECMA
                                               mount inductors for use in electronic and telecommunication
                                               equipment
657   21 60317 EN 60317-0-3:2008/FprA1:2012 Specifications for particular types of winding wires -- Part 0-3: 5020 MECMA
                                            General requirements - Enamelled round aluminium wire

658   21 60317 EN 60317-0-7:2012               Specifications for particular types of winding wires -- Part 0-7: 5020 MECMA
                                               General requirements - Fully insulated (FIW) zero-defect
                                               enamelled round copper wire with nominal conductor
                                               diameter of 0,040 mm to 1,600 mm
659   21 60317 EN 60317-56:2012                Specifications for particular types of winding wires -- Part 56:   5020 MECMA
                                               Solderable fully insulated (FIW) zero-defect polyurethane
                                               enamelled round copper wire with nominal conductor
                                               diameter of 0,040 mm to 1,600 mm, class 180

660   21 60317 FprEN 60317-0-1:2012            Specifications for particular types of winding wires -- Part 0-1: 5020 MECMA
                                               General requirements - Enamelled round copper wire

661   21 60317 FprEN 60317-20:2012             Specifications for particular types of winding wires -- Part 20:   5020 MECMA
                                               Solderable polyurethane enamelled round copper wire, class
                                               155
662   21 60317 FprEN 60317-21:2012             Specifications for particular types of winding wires -- Part 21:   5020 MECMA
                                               Solderable polyurethane enamelled round copper wire
                                               overcoated with polyamide, class 155
663   21 60317 FprEN 60317-23:2012             Specifications for particular types of winding wires -- Part 23:   5020 MECMA
                                               Solderable polyesterimide enamelled round copper wire,
                                               class 180
664   21 60317 FprEN 60317-35:2012             Specifications for particular types of winding wires -- Part 35:   5020 MECMA
                                               Solderable polyurethane enamelled round copper wire, class
                                               155, with a bonding layer
665   21 60317 FprEN 60317-36:2012             Specifications for particular types of winding wires -- Part 36:   5020 MECMA
                                               Solderable polyesterimide enamelled round copper wire,
                                               class 180, with a bonding layer
666   21 60317 FprEN 60317-37:2012             Specifications for particular types of winding wires -- Part 37:   5020 MECMA
                                               Polyesterimide enamelled round copper wire, class 180, with
                                               a bonding layer
667   21 60317 FprEN 60317-38:2012          Specifications for particular types of winding wires -- Part 38: 5020 MECMA
                                            Polyester or polyesterimide overcoated with polyamide-imide
                                            enamelled round copper wire, class 200, with a bonding layer

668   21 60317 FprEN 60317-46:2012          Specifications for particular types of winding wires -- Part 46:   5020 MECMA
                                            Aromatic polyimide enamelled round copper wire, class 240

669   21 60317 FprEN 60317-47:2012          Specifications for particular types of winding wires -- Part 47:   5020 MECMA
                                            Aromatic polyimide enamelled rectangular copper wire, class
                                            240
670   21 60317 FprEN 60317-55:2012          Specifications for particular types of winding wires -- Part 55:   5020 MECMA
                                            Solderable polyurethane enamelled round copper wire
                                            overcoated with polyamide, Class 180
671   21 60851 EN 60851-3:2009/FprA1:2012   Winding wires - Test methods -- Part 3: Mechanical                 5020 MECMA
                                            properties
672   21 60851 EN 60851-6:2012              Winding wires - Test methods -- Part 6: Thermal properties         5020 MECMA

673   23 13482 prEN ISO 13482               Robots and robotic devices - Safety requirements for non-          4020 MECMA
                                            industrial robots - Non-medical personal care robot (ISO/DIS
                                            13482:2011)
674   23 60204 FprEN 60204-31:2011          Safety of machinery - Electrical equipment of machines --          5020 MECMA
                                            Part 31: Particular safety and EMC requirements for sewing
                                            machines, units and systems
675   23 60584 FprEN 60584-1:2011           Thermocouples -- Part 1: EMF specifications and tolerances         5020 MECMA

676   23 60770 FprEN 60770-3:2012           Transmitters for using in industrial-process control systems -- 5020 MECMA
                                            Part 3: Methods for performance evaluation of intelligent
                                            transmitters
677   23 61010 FprEN 61010-2-201:2012       Safety requirements for electrical equipment for                   5020 MECMA
                                            measurement, control and laboratory use -- Part 2-201:
                                            Particular requirements for control equipment, excluding
                                            functional safety, in the scope of industrial-process
                                            measurement, control and automation
678   23 61131 FprEN 61131-3:201X           Programmable controllers -- Part 3: Programming languages          5020 MECMA

679   23 61131 FprEN 61131-6:2012           Programmable controllers -- Part 6: Functional safety              5020 MECMA
680   23 61131 FprEN 61131-9:2011           Programmable controllers -- Part 9: Single-drop digital            5020 MECMA
                                            communication interface for small sensors and actuators
                                            (SDCI)
681   23 61158 FprEN 61158-1:2012           Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 1: Overview and guidance for the IEC 61158 and IEC
                                            61784 series
682   23 61158 FprEN 61158-2:2012           Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 2: Physical layer specification and service definition

683   23 61158 FprEN 61158-3-X:2012         Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 3-x: Data-link layer service definition - Type x elements

684   23 61158 FprEN 61158-4-X:2012         Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 4-x: Data-link layer protocol specification - Type x
                                            elements
685   23 61158 FprEN 61158-5-X:2012         Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 5-x: Application layer service definition - Type x
                                            elements
686   23 61158 FprEN 61158-6-X:2012         Industrial communication networks - Fieldbus specifications -- 5020 MECMA
                                            Part 6-x: Application layer protocol specification - Type x
                                            elements
687   23 61207 FprEN 61207-7:2011           Expression of performance of gas analyzers -- Part 7:              5020 MECMA
                                            Tunable semiconductor laser gas analyzers (utilizing tunable
                                            semiconductor laser absorption spectroscopy)
688   23 61326 FprEN 61326-2-1:2012       Electrical equipment for measurement, control and laboratory 5020 MECMA
                                          use - EMC requirements -- Part 2-1: Particular requirements -
                                          Test configurations, operational conditions and performance
                                          criteria for sensitive test and measurement equipment for
                                          EMC unprotected applications


689   23 61326 FprEN 61326-2-2:2012       Electrical equipment for measurement, control and laboratory 5020 MECMA
                                          use - EMC requirements -- Part 2-2: Particular requirements -
                                          Test configurations, operational conditions and performance
                                          criteria for portable test, measuring and monitoring
                                          equipment used in low-voltage distribution systems


690   23 61326 FprEN 61326-2-5:2012       Electrical equipment for measurement, control and laboratory 5020 MECMA
                                          use - EMC requirements -- Part 2-5: Particular requirements -
                                          Test configurations, operational conditions and performance
                                          criteria for devices with field bus interfaces according to IEC
                                          61784-1


691   23 61496 FprEN 61496-2:2011         Safety of machinery - Electro-sensitive protective equipment - 5020 MECMA
                                          - Part 2: Particular requirements for equipment using active
                                          opto-electronic protective devices (AOPDs)

692   23   61499   FprEN 61499-1:2012     Function blocks -- Part 1: Architecture                          5020   MECMA
693   23   61499   FprEN 61499-2:2012     Function blocks -- Part 2: Software tool requirements            5020   MECMA
694   23   61499   FprEN 61499-4:201X     Function blocks -- Part 4: Rules for compliance profiles         5020   MECMA
695   23   61784   FprEN 61784-1:2012     Industrial communication networks - Profiles -- Part 1:          5020   MECMA
                                          Fieldbus profiles
696   23 61784 FprEN 61784-2:2012         Industrial communication networks - Profiles -- Part 2:          5020 MECMA
                                          Additional fieldbus profiles for real-time networks based on
                                          ISO/IEC 8802-3
697   23 61784 FprEN 61784-5-X:2011       Industrial communication networks - Profiles -- Part 5-X:        5020 MECMA
                                          Installation of fieldbuses - Installation profiles for CPF X
698   23 61918 EN 61918:201X/AA:201X      Industrial communication networks - Installation of              5020 MECMA
                                          communication networks in industrial premises
699   23 61918 FprEN 61918:2011           Industrial communication networks - Installation of              5020 MECMA
                                          communication networks in industrial premises
700   23 62061 EN 62061:2005/FprA1:2011   Safety of machinery - Functional safety of safety-related        5020 MECMA
                                          electrical, electronic and programmable electronic control
                                          systems
701   23 62264 FprEN 62264-1:2012         Enterprise system integration -- Part 1: Models and              5020 MECMA
                                          terminology
702   23 62264 FprEN 62264-2:2012         Enterprise system integration -- Part 2: Object models and       5020 MECMA
                                          attributes
703   23 62337 EN 62337:2012              Commissioning of electrical, instrumentation and control         5020 MECMA
                                          systems in the process industry - Specific phases and
                                          milestones
704   23 62381 EN 62381:2012              Automation systems in the process industry - Factory             5020 MECMA
                                          acceptance test (FAT), site acceptance test (SAT) and site
                                          integration test (SIT)
705   23 62382 FprEN 62382:2012           Electrical and instrumentation loop check                        5020 MECMA
706   23 62439 EN 62439-1:2010/A1:2012    Industrial communication networks - High availability            5020 MECMA
                                          automation networks -- Part 1: General concepts and
                                          calculation methods
707   23 62439 EN 62439-3:2012            Industrial communication networks - High availability            5020 MECMA
                                          automation networks -- Part 3: Parallel Redundancy Protocol
                                          (PRP) and High-availability Seamless Redundancy (HSR)

708   23 62439 EN 62439-4:2010/A1:2012    Industrial communication networks - High availability            5020 MECMA
                                          automation networks -- Part 4: Cross-network Redundancy
                                          Protocol (CRP)
709   23 62603 FprEN 62603-1:2011         Industrial process control systems - Guidelines for evaluating   5020 MECMA
                                          process control systems -- Part 1: Specifications
710   23 62703 FprEN 62703:2012             Expression of performance of fluorometric oxygen analyzers    5020 MECMA
                                            in liquid media
711   24 61010 EN 61010-2-033:2012          Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control, and laboratory use -- Part 2-033:
                                            Particular requirements for hand-held multimeters and other
                                            meters, for domestic and professional use, capable of
                                            measuring mains voltage
712   24 61010 EN 61010-2-091:2012          Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control and laboratory use -- Part 2-091:
                                            Particular requirements for cabinet x-ray systems
713   24 61010 FprEN 61010-2-010:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control and laboratory use -- Part 2-010:
                                            Particular requirements for laboratory equipment for the
                                            heating of materials
714   24 61010 FprEN 61010-2-032:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control, and laboratory use -- Part 2-032:
                                            Particular requirements for hand-held and hand-manipulated
                                            current sensors for electrical test and measurement


715   24 61010 FprEN 61010-2-032:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control, and laboratory use -- Part 2-032:
                                            Particular requirements for hand-held and hand-manipulated
                                            current sensors for electrical test and measurement

716   24 61010 FprEN 61010-2-051:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control and laboratory use -- Part 2-051:
                                            Particular requirements for laboratory equipment for mixing
                                            and stirring
717   24 61010 FprEN 61010-2-061:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control and laboratory use -- Part 2-061:
                                            Particular requirements for laboratory atomic spectrometers
                                            with thermal atomization and ionization
718   24 61010 FprEN 61010-2-081:2012       Safety requirements for electrical equipment for              5020 MECMA
                                            measurement, control and laboratory use -- Part 2-081:
                                            Particular requirements for automatic and semi-automatic
                                            laboratory equipment for analysis and other purposes

719   26 60601 FprEN 60601-2-66:2012        Hearing instruments and hearing instrument systems -- Part    5020 MECMA
                                            2-66: General requirements for basic safety and essential
                                            performance
720   26 60645 EN 60645-1:201X              Electroacoustics - Audiometric equipment -- Part 1:           5020 MECMA
                                            Equipment for pure-tone audiometry
721   26 61094 FprEN 61094-8:2011           Electroacoustics - Measurement microphones -- Part 8:         5020 MECMA
                                            Methods for free-field calibration of working standard
                                            microphones by comparison
722   26 61157 EN 61157:2007/FprA1:201X     Standard means for the reporting of the acoustic output of    5020 MECMA
                                            medical diagnostic ultrasonic equipment
723   26 61161 FprEN 61161:201X             Ultrasonics - Power measurement - Radiation force balances    5020 MECMA
                                            and performance requirements
724   26 61260 FprEN 61260-1:201X           Electroacoustics - Octave-band and fractional-octave-band     5020 MECMA
                                            filters -- Part 1: Specifications
725   26 61689 FprEN 61689:201X             Ultrasonics - Physiotherapy systems - Field specifications    5020 MECMA
                                            and methods of measurement in the frequency range 0,5
                                            MHz to 5 MHz
726   26 62127 EN 62127-1:2007/FprA1:201X   Ultrasonics - Hydrophones -- Part 1: Measurement and          5020 MECMA
                                            characterization of medical ultrasonic fields up to 40 MHz

727   26 62127 EN 62127-2:2007/FprA1:201X   Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic 5020 MECMA
                                            fields up to 40 MHz
728   26 62127 EN 62127-3:2007/FprA1:201X   Ultrasonics - Hydrophones -- Part 3: Properties of              5020 MECMA
                                            hydrophones for ultrasonic fields up to 40 MHz
729   26 62555 FprEN 62555:2011             Ultrasonics - Power measurement - Output power                  5020 MECMA
                                            measurement for high intensity therapeutic ultrasound (HITU)
                                            transducers and systems
730   27 50131 CLC/TS 50131-11:2012            Alarm systems - Intrusion and hold-up systems -- Part 11:    5020 MECMA
                                               Hold-up devices
731   27 50131 CLC/TS 50131-5-4:2012           Alarm systems - Intrusion and hold-up systems -- Part 5-4:   5020 MECMA
                                               System compatibility testing for I&HAS equipments located in
                                               supervised premises
732   27 50131 EN 50131-2-7-1:2012             Alarm systems - Intrusion and hold-up systems -- Part 2-7-1:     5020 MECMA
                                               Intrusion detectors - Glass break detectors (acoustic)

733   27 50131 EN 50131-2-7-2:2012             Alarm systems - Intrusion and hold-up systems -- Part 2-7-2:     5020 MECMA
                                               Intrusion detectors - Glass break detectors (passive)

734   27 50131 EN 50131-2-7-3:2012             Alarm systems - Intrusion and hold-up systems -- Part 2-7-3:     5020 MECMA
                                               Intrusion detectors - Glass break detectors (active)

735   27 50131 prEN 50131-10:2012              Alarm systems - Intrusion and hold-up systems -- Part 10:        4020 MECMA
                                               Application specific requirements for Supervised Premises
                                               Transceiver (SPT)
736   27 50132 EN 50132-5-3:2012               Alarm systems - CCTV surveillance systems for use in             5020 MECMA
                                               security applications -- Part 5-3: Video transmission -
                                               Analogue and digital video transmission
737   27 50132 EN 50132-7:2012                 Alarm systems - CCTV surveillance systems for use in       5020 MECMA
                                               security applications -- Part 7: Application guidelines
738   27 50134 EN 50134-3:2012                 Alarm systems - Social alarm systems -- Part 3: Local unit 5020 MECMA
                                               and controller
739   27 50136 CLC/FprTS 50136-9:2012          Alarm systems - Alarm transmission systems and equipment - 5020 MECMA
                                               - Part 9: Requirements for common protocol for alarm
                                               transmission using the Internet protocol
740   27 50136 prEN 50136-3:2011               Alarm systems - Alarm transmission systems and equipment - 4020 MECMA
                                               - Part 3: Requirements for Receiving Centre Transceiver
                                               (RCT)
741   27 60839 FprEN 60839-11-1:2012           Alarm systems -- Part 11-1: Electronic access control            5020 MECMA
                                               systems - System and components requirements
742   27 62676 FprEN 62676-1-1:2012            Video surveillance systems for use in security applications --   5020 MECMA
                                               Part 1-1: Video system requirements
743   27 62676 FprEN 62676-1-2:2012            Video surveillance systems for use in security applications --   5020 MECMA
                                               Part 1-2: Video transmission – General video transmission -
                                               requirements
744   30 50561 FprEN 50561-1:2012              Power line communication apparatus used in low-voltage           5020 MECMA
                                               installations - Radio disturbance characteristics - Limits and
                                               methods of measurement -- Part 1: Apparatus for in-home
                                               use
745   30 55016 EN 55016-1-2:2004/FprA3:2012 Specification for radio disturbance and immunity measuring          5020 MECMA
               (fragment 1)                 apparatus and methods -- Part 1-2: Radio disturbance and
                                            immunity measuring apparatus - Ancillary equipment -
                                            Conducted disturbances
746   30 55016 EN 55016-1-2:2004/FprA3:2012 Specification for radio disturbance and immunity measuring          5020 MECMA
               (fragment 2)                 apparatus and methods -- Part 1-2: Radio disturbance and
                                            immunity measuring apparatus - Ancillary equipment -
                                            Conducted disturbances
747   30 55016 EN 55016-1-4:2010/A1:201X       Specification for radio disturbance and immunity measuring       5020 MECMA
                                               apparatus and methods -- Part 1-4: Radio disturbance and
                                               immunity measuring apparatus - Antennas and test sites for
                                               radiated disturbance measurements


748   30 55016 EN 55016-1-5:2004/FprA1:2012 Specification for radio disturbance and immunity measuring          5020 MECMA
                                            apparatus and methods -- Part 1-5: Radio disturbance and
                                            immunity measuring apparatus - Antenna calibration test
                                            sites for 30 MHz to 1 000 MHz
749   30 55016 EN 55016-2-1:2009/FprA3:2012 Specification for radio disturbance and immunity measuring 5020 MECMA
                                            apparatus and methods -- Part 2-1: Methods of measurement
                                            of disturbances and immunity - Conducted disturbance
                                            measurements
750   30 55016 EN 55016-2-3:2010/FprA2:2011 Specification for radio disturbance and immunity measuring 5020 MECMA
               (fragment 1)                 apparatus and methods -- Part 2-3: Methods of measurement
                                            of disturbances and immunity - Radiated disturbance
                                            measurements
751   30 55016 EN 55016-2-3:2010/FprA2:2011 Specification for radio disturbance and immunity measuring 5020 MECMA
               (fragment 2)                 apparatus and methods -- Part 2-3: Methods of measurement
                                            of disturbances and immunity - Radiated disturbance
                                            measurements
752   30 55016 EN 55016-4-2:2011/FprA1:2012 Specification for radio disturbance and immunity measuring            5020 MECMA
                                            apparatus and methods -- Part 4-2: Uncertainties, statistics
                                            and limit modelling - Measurement instrumentation
                                            uncertainty
753   30 55020 EN 55020:2007/FprA1:2012         Sound and television broadcast receivers and associated           5020 MECMA
                                                equipment - Immunity characteristics - Limits and methods of
                                                measurement
754   30 55035 FprEN 55035:2012                 Electromagnetic compatibility of multimedia equipment -           5020 MECMA
                                                Immunity requirements
755   30 55103 EN 55103-1:2009/FprAA:2012       Electromagnetic compatibility - Product family standard for       5020 MECMA
                                                audio, video, audio-visual and entertainment lighting control
                                                apparatus for professional use -- Part 1: Emissions

756   30 61000 EN 61000-4-25:2002/A1:2012       Electromagnetic compatibility (EMC) -- Part 4-25: Testing         5020 MECMA
                                                and measurement techniques - HEMP immunity test
                                                methods for equipment and systems
757   30 61000 EN 61000-4-4:201X                Electromagnetic compatibility (EMC) -- Part 4-4: Testing and      5020 MECMA
                                                measurement techniques - Electrical fast transient/burst
                                                immunity test
758   30 61000 FprEN 61000-3-3:2012             Electromagnetic compatibility (EMC) -- Part 3-3: Limits -         5020 MECMA
                                                Limitation of voltage changes, voltage fluctuations and flicker
                                                in public low-voltage supply systems, for equipment with
                                                rated current <= 16 A per phase and not subject to
                                                conditional connection
759   30 61000 FprEN 61000-4-6:2012             Electromagnetic compatibility (EMC) -- Part 4-6: Testing and      5020 MECMA
                                                measurement techniques - Conducted disturbances, induced
                                                by radio-frequency fields immunity test

760   31 50156 prEN 50156-1:2012                Electrical equipment for furnaces and ancillary equipment --      4020 MECMA
                                                Part 1: Requirements for application design and installation

761   31 60519 FprEN 60519-10:2012              Safety in electroheat installations -- Part 10: Particular        5020 MECMA
                                                requirements for electrical resistance trace heating systems
                                                for industrial and commercial applications
762   31 60519 FprEN 60519-12:2012              Safety in electroheating installations -- Part 12: Particular     5020 MECMA
                                                requirements for infrared electroheating installations

763   31 60519 FprEN 60519-4:2012               Safety in electroheating installations -- Part 4: Particular      5020 MECMA
                                                requirements for arc furnace installations
764   31 62395 FprEN 62395-1:2012               Electrical resistance trace heating systems for industrial and    5020 MECMA
                                                commercial applications -- Part 1: General and testing
                                                requirements
765   31 62395 FprEN 62395-2:2012               Electrical resistance trace heating systems for industrial and    5020 MECMA
                                                commercial applications -- Part 2: Application guide for
                                                system design, installation and maintenance

766   33 60695 EN 60695-4:2012                  Fire hazard testing -- Part 4: Terminology concerning fire        5020 MECMA
                                                tests for electrotechnical products
767   33 60695 FprEN 60695-11-10:201X           Fire hazard testing -- Part 11-10: Test flames - 50 W             5020 MECMA
                                                horizontal and vertical flame test methods
768   33 60695 FprEN 60695-11-2:2012            Fire hazard testing -- Part 11-2: Test flames - 1 kW nominal      5020 MECMA
                                                premixed flame: Apparatus, confirmatory test arrangement
                                                and guidance
769   33 60695 FprEN 60695-11-20:201X           Fire hazard testing -- Part 11-20: Test flames - 500 W flame      5020 MECMA
                                                test methods
770   33 60695 FprEN 60695-2-10:201X        Fire hazard testing -- Part 2-10: Glowing/hot-wire based test   5020 MECMA
                                            methods - Glow-wire apparatus and common test procedure

771   33 60695 FprEN 60695-2-11:2012        Fire hazard testing -- Part 2-11: Glowing/hot-wire based test   5020 MECMA
                                            methods - Glow-wire flammability test method for end-
                                            products
772   33 60695 FprEN 60695-9-1:2012         Fire hazard testing -- Part 9-1: Surface spread of flame -      5020 MECMA
                                            General guidance
773   34 61788 FprEN 61788-12:2012          Superconductivity -- Part 12: Matrix to superconductor          5020 MECMA
                                            volume ratio measurement - Copper to non-copper volume
                                            ratio of Nb3Sn composite superconducting wires

774   34 61788 FprEN 61788-16:2012          Superconductivity -- Part 16: Electronic characteristic         5020 MECMA
                                            measurements - Power-dependent surface resistance of
                                            superconductors at microwave frequencies
775   34 61788 FprEN 61788-16:2012          Superconductivity -- Part 16: Electronic characteristic         5020 MECMA
                                            measurements - Power-dependent surface resistance of
                                            superconductors at microwave frequencies
776   34 61788 FprEN 61788-17:2012          Superconductivity -- Part 17: Electronic characteristic         5020 MECMA
                                            measurements - Local critical current density and its
                                            distribution in large-area superconducting films
777   34 61788 FprEN 61788-17:2012          Superconductivity -- Part 17: Electronic characteristic         5020 MECMA
                                            measurements - Local critical current density and its
                                            distribution in large-area superconducting films
778   34 61788 FprEN 61788-18:2012          Superconductivity -- Part 18: Mechanical properties             5020 MECMA
                                            measurement - Room temperature tensile test of Ag- and/or
                                            Ag alloy-sheathed Bi-2223 and Bi-2212 composite
                                            superconductors
779   34 61788 FprEN 61788-5:2012           Superconductivity -- Part 5: Matrix to superconductor volume    5020 MECMA
                                            ratio measurement - Copper to superconductor volume ratio
                                            of Cu/Nb-Ti composite superconducting wires

780   35 50521 EN 50521:2008/A1:2012        Connectors for photovoltaic systems - Safety requirements       5020 MECMA
                                            and tests
781   35 50530 EN 50530:2010/FprAA:2012     Overall efficiency of grid connected photovoltaic inverters     5020 MECMA

782   35 60904 FprEN 60904-8:2012           Photovoltaic devices -- Part 8: Measurement of spectral         5020 MECMA
                                            response of a photovoltaic (PV) device
783   35 61730 EN 61730-1:2007/FprA2:2012   Photovoltaic (PV) module safety qualification -- Part 1:        5020 MECMA
                                            Requirements for construction
784   35 61829 FprEN 61829:2012             Crystalline silicon photovoltaic (PV) array - On-site           5020 MECMA
                                            measurement of I-V characteristics
785   35 62116 FprEN 62116:2012             Test procedure of islanding prevention measures for utility-    5020 MECMA
                                            interconnected photovoltaic inverters
786   35 62670 FprEN 62670-1:2012           Concentrator photovoltaic (CPV) performance testing -- Part     5020 MECMA
                                            1: Standard conditions
787   35 62716 FprEN 62716:2012             Ammonia corrosion testing of photovoltaic (PV) modules          5020 MECMA

788   36 61954 EN 61954:2011/FprA1:2012     Static VAR compensators (SVC) - Testing of thyristor valves     5020 MECMA

789   36 62040 EN 62040-1:2008/FprA1:2012   Uninterruptible power systems (UPS) -- Part 1: General and      5020 MECMA
                                            safety requirements for UPS
790   36 62040 EN 62040-1:2008/FprA1:2012   Uninterruptible power systems (UPS) -- Part 1: General and      5020 MECMA
                                            safety requirements for UPS
791   36 62040 FprEN 62040-4:2012           Uninterruptible power systems (UPS) -- Part 4:                  5020 MECMA
                                            Environmental aspects - requirements and reporting
792   37 60143 FprEN 60143-2:2012           Series capacitors for power systems -- Part 2: Protective       5020 MECMA
                                            equipment for series capacitor banks
793   37 60358 EN 60358-1:2012              Coupling capacitors and capacitor dividers -- Part 1: General   5020 MECMA
                                            rules
794   37 60358 FprEN 60358-2:2012           Coupling capacitors and capacitor dividers -- Part 2: AC or     5020 MECMA
                                            DC single-phase coupling capacitor connected between line
                                            and ground for power line carrier-frequency (PLC) application
795   37 60831 FprEN 60831-1:2012          Shunt power capacitors of the self-healing type for a.c.          5020 MECMA
                                           systems having a rated voltage up to and including 1000 V --
                                           Part 1: General - Performance, testing and rating - Safety
                                           requirements - Guide for installation and operation


796   37 60831 FprEN 60831-2:2012          Shunt power capacitors of the self-healing type for a.c.          5020 MECMA
                                           systems having a rated voltage up to and including 1000 V --
                                           Part 2: Ageing test, self-healing test and destruction test

797   37 62146 FprEN 62146-1:2012          Grading capacitors for high-voltage alternating current circuit- 5020 MECMA
                                           breakers
798   39   2553 prEN ISO 2553              Welding and allied processes - Symbolic representation on        4020 MECMA
                                           drawings - Welded, brazed and soldered joints (ISO/DIS
                                           2553:2012)
799   39   3690 EN ISO 3690:2012           Welding and allied processes - Determination of hydrogen          5020 MECMA
                                           content in arc weld metal (ISO 3690:2012)
800   39   4136 FprEN ISO 4136             Destructive tests on welds in metallic materials - Transverse     5020 MECMA
                                           tensile test (ISO/FDIS 4136:2012)
801   39   5172 EN ISO 5172:2006/A1:2012   Gas welding equipment - Blowpipes for gas welding, heating        5020 MECMA
                                           and cutting - Specifications and tests - Amendment 1 (ISO
                                           5172:2006/Amd 1:2012)
802   39   5817 prEN ISO 5817              Welding - Fusion-welded joints in steel, nickel, titanium and     4020 MECMA
                                           their alloys (beam welding excluded) - Quality levels for
                                           imperfections (ISO/DIS 5817:2012)
803   39   5826 prEN ISO 5826 rev          Resistance welding equipment - Transformers - General             4020 MECMA
                                           specifications applicable to all transformers (ISO/DIS
                                           5826:2012)
804   39   8205 FprEN ISO 8205-3           Water-cooled secondary connection cables for resistance           5020 MECMA
                                           welding - Part 3: Test requirements (ISO/FDIS 8205-3:2012)

805   39   9016 FprEN ISO 9016             Destructive tests on welds in metallic materials - Impact tests   5020 MECMA
                                           - Test specimen location, notch orientation and examination
                                           (ISO/FDIS 9016:2012)
806   39   9455 EN ISO 9455-10:2012        Soft soldering fluxes - Test methods - Part 10: Flux efficacy     5020 MECMA
                                           test, solder spread method (ISO 9455-10:2012)

807   39   9539 EN ISO 9539:2010/prA1      Gas welding equipment - Materials for equipment used in           4020 MECMA
                                           gas welding, cutting and allied processes - Amendment 1
                                           (ISO 9539:2010/DAM 1:2012)
808   39 12153 EN ISO 12153:2012           Welding consumables - Tubular cored electrodes for gas            5020 MECMA
                                           shielded and non-gas shielded metal arc welding of nickel
                                           and nickel alloys - Classification (ISO 12153:2011)

809   39 12996 prEN ISO 12996              Mechanical joining - Destructive testing of joints - Specimen     4020 MECMA
                                           dimensions and test procedure for tensile shear testing of
                                           single joints (ISO/DIS 12996:2011)
810   39 13585 EN ISO 13585:2012           Brazing - Qualification test of brazers and brazing operators     5020 MECMA
                                           (ISO 13585:2012)
811   39 13588 FprEN ISO 13588             Non-destructive testing of welds - Ultrasonic testing - Use of    5020 MECMA
                                           automated phased array technology (ISO/FDIS 13588:2012)

812   39 14700 prEN 14700                  Welding consumables - Welding consumables for hard-               4020 MECMA
                                           facing
813   39 14732 prEN ISO 14732 rev          Welding personnel - Qualification testing of welding              4020 MECMA
                                           operators for fully mechanized welding and weld setters for
                                           fully mechanized welding and automatic welding of metallic
                                           materials (ISO/DIS 14732:2012)
814   39 14920 prEN ISO 14920              Thermal spraying - Spraying and fusing of self-fluxing alloys     4020 MECMA
                                           (ISO/DIS 14920:2012)
815   39 15011 CEN ISO/TS 15011-6:2012     Health and safety in welding and allied processes -               5020 MECMA
                                           Laboratory method for sampling fume and gases - Part 6:
                                           Procedure for quantitative determination of fume and gases
                                           from resistance spot welding (ISO/TS 15011-6:2012)
816   39 15339 FprCEN/TR 15339-6               Thermal spraying - Safety requirements for thermal spraying        5020 MECMA
                                               equipment - Part 6: Spray cabin, Handling system, Dust
                                               collection, Exhausting system, Filter
817   39 15339 prEN 15339-1                    Thermal spraying - Safety requirements for thermal spraying        4020 MECMA
                                               equipment - Part 1: General requirements
818   39 15339 prEN 15339-3                    Thermal spraying - Safety requirements for thermal spraying        4020 MECMA
                                               equipment - Part 3: Torches for thermal spraying and their
                                               connection and supply units
819   39 15339 prEN 15339-4                    Thermal spraying - Safety requirements for thermal spraying        4020 MECMA
                                               equipment - Part 4: Gas and liquid fuel supply
820   39 15339 prEN 15339-5                    Thermal spraying - Safety requirements for thermal spraying        4020 MECMA
                                               equipment - Part 5: Powder and wire feed units

821   39 15614 EN ISO 15614-1:2004/A2:2012 Specification and qualification of welding procedures for              5020 MECMA
                                           metallic materials - Welding procedure test - Part 1: Arc and
                                           gas welding of steels and arc welding of nickel and nickel
                                           alloys - Amendment 2 (ISO 15614-1:2004/Amd 2:2012)


822   39 15614 EN ISO 15614-13:2012            Specification and qualification of welding procedures for          5020 MECMA
                                               metallic materials - Welding procedure test - Part 13: Upset
                                               (resistance butt) and flash welding (ISO 15614-13:2012)

823   39 15615 prEN ISO 15615                  Gas welding equipment - Acetylene manifold systems for             4020 MECMA
                                               welding, cutting and allied processes - Safety requirements
                                               in high-pressure devices (ISO/DIS 15615:2012)

824   39 16834 EN ISO 16834:2012               Welding consumables - Wire electrodes, wires, rods and          5020 MECMA
                                               deposits for gas shielded arc welding of high strength steels -
                                               Classification (ISO 16834:2012)
825   39 17636 FprEN ISO 17636-1               Non-destructive testing of welds - Radiographic testing - Part     5020 MECMA
                                               1: X- and gamma-ray techniques with film (ISO/FDIS 17636-
                                               1:2012)
826   39 17636 FprEN ISO 17636-2               Non-destructive testing of welds - Radiographic testing - Part     5020 MECMA
                                               2: X- and gamma-ray techniques with digital detectors
                                               (ISO/FDIS 17636-2:2012)
827   39 17653 EN ISO 17653:2012               Resistance welding - Destructive tests on welds in metallic        5020 MECMA
                                               materials - Torsion test of resistance spot welds (ISO
                                               17653:2012)
828   39 18275 EN ISO 18275:2012               Welding consumables - Covered electrodes for manual metal 5020 MECMA
                                               arc welding of high-strength steels - Classification (ISO
                                               18275:2011)
829   39 21952 EN ISO 21952:2012               Welding consumables - Wire electrodes, wires, rods and             5020 MECMA
                                               deposits for gas shielded arc welding of creep-resisting
                                               steels - Classification (ISO 21952:2012)
830   39 22825 EN ISO 22825:2012               Non-destructive testing of welds - Ultrasonic testing - Testing    5020 MECMA
                                               of welds in austenitic steels and nickel-based alloys (ISO
                                               22825:2012)
831   39 24598 EN ISO 24598:2012               Welding consumables - Solid wire electrodes, tubular cored         5020 MECMA
                                               electrodes and electrode-flux combinations for submerged
                                               arc welding of creep-resisting steels - Classification (ISO
                                               24598:2012)
832   40   2400 EN ISO 2400:2012               Non-destructive testing - Ultrasonic testing - Specification for   5020 MECMA
                                               calibration block No. 1 (ISO 2400:2012)

833   40   3059 FprEN ISO 3059                 Non-destructive testing - Penetrant testing and magnetic           5020 MECMA
                                               particle testing - Viewing conditions (ISO/FDIS 3059:2012)

834   40   3452 prEN ISO 3452-2 rev            Non-destructive testing - Penetrant testing - Part 2: Testing   4020 MECMA
                                               of penetrant materials (ISO/DIS 3452-2:2012)
835   40   3452 prEN ISO 3452-3                Non-destructive testing - Penetrant testing - Part 3: reference 4020 MECMA
                                               test blocks (ISO/DIS 3452-3:2012)
836   40   5579 prEN ISO 5579                  Non-destructive testing - Radiographic testing of metallic      4020 MECMA
                                               materials using film and X- or gamma rays - Basic rules
                                               (ISO/DIS 5579:2012)
837   40   9712 EN ISO 9712:2012      Non-destructive testing - Qualification and certification of       5020 MECMA
                                      NDT personnel (ISO 9712:2012)
838   40 14584 FprEN 14584            Non-destructive testing - Acoustic emission testing -              4020 MECMA
                                      Examination of metallic pressure equipment during proof
                                      testing - Planar location of AE sources
839   40 16332 CEN/TR 16332:2012      Non-destructive testing - Interpretation of EN ISO/IEC 17024 5020 MECMA
                                      for NDT personnel certification application
840   40 16392 prEN 16392-2           Non Destructive Testing - Characterisation and verification of 4020 MECMA
                                      ultrasonic phased array systems - Part 2: Probes

841   40 16407 prEN 16407-1           Non-destructive testing - Radiographic inspection of               4020 MECMA
                                      corrosion and deposits in pipes by X- and gamma rays - Part
                                      1: Tangential radiographic inspection
842   40 16407 prEN 16407-2           Non-destructive testing - Radiographic inspection of               4020 MECMA
                                      corrosion and deposits in pipes by X- and gamma rays - Part
                                      2: Double Wall radiographic inspection
843   40 16946 prEN ISO 16946         Non-destructive testing - Ultrasonic testing - Specification for 4020 MECMA
                                      step wedge calibration block (ISO/DIS 16946:2012)

844   42    377 prEN ISO 377 rev      Steel and steel products - Location and preparation of             4020 MECMA
                                      samples and test pieces for mechanical testing (ISO/DIS
                                      377:2012)
845   42    643 FprEN ISO 643         Steels - Micrographic determination of the apparent grain          5020 MECMA
                                      size (ISO/FDIS 643:2012)
846   42   9513 FprEN ISO 9513        Metallic materials - Calibration of extensometer systems           5020 MECMA
                                      used in uniaxial testing (ISO/FDIS 9513:2012)
847   42 10088 prEN 10088-1           Stainless steels - Part 1: List of stainless steels                4020 MECMA
848   42 10088 prEN 10088-2           Stainless steels - Part 2: Technical delivery conditions for       4020 MECMA
                                      sheet/plate and strip of corrosion resisting steels for general
                                      purposes
849   42 10088 prEN 10088-3           Stainless steels - Part 3: Technical delivery conditions for       4020 MECMA
                                      semi-finished products, bars, rods, wire, sections and bright
                                      products of corrosion resisting steels for general purposes

850   42 10107 prEN 10107 rev         Grain-oriented electrical steel strip and sheet delivered in the   4020 MECMA
                                      fully processed state
851   42 10149 prEN 10149-1           Hot rolled flat products made of high yield strength steels for    4320 MECMA
                                      cold forming - Part 1: General technical delivery conditions

852   42 10149 prEN 10149-2           Hot rolled flat products made of high yield strength steels for    4320 MECMA
                                      cold forming - Part 2: Technical delivery conditions for
                                      thermomechanically rolled steels
853   42 10149 prEN 10149-3           Hot rolled flat products made of high yield strength steels for    4320 MECMA
                                      cold forming - Part 3: Technical delivery conditions for
                                      normalized or normalized rolled steels
854   42 10169 EN 10169:2010/FprA1    Continuously organic coated (coil coated) steel flat products -    5020 MECMA
                                      Technical delivery conditions
855   42 10213 EN 10213:2007/prA1     Steel castings for pressure purposes                               4020 MECMA
856   42 10268 EN 10268:2006/prA1     Cold rolled steel flat products with higher yield strength for     4320 MECMA
                                      cold forming - Technical delivery conditions
857   42 10268 EN 10268:2006/prA1     Cold rolled steel flat products with higher yield strength for     4020 MECMA
                                      cold forming - Technical delivery conditions
858   42 10269 prEN 10269             Steels and nickel alloys for fasteners with specified elevated     4320 MECMA
                                      and/or low temperature properties
859   42 10269 prEN 10269             Steels and nickel alloys for fasteners with specified elevated     4020 MECMA
                                      and/or low temperature properties
860   42 10293 prEN 10293 rev         Steel casting and forgings - Steel castings for general            4020 MECMA
                                      engineering uses
861   42 14577 prEN ISO 14577-1 rev   Metallic materials - Instrumented indentation test for             4020 MECMA
                                      hardness and materials parameters - Part 1: Test method
                                      (ISO/DIS 14577-1:2012)
862   42 14577 prEN ISO 14577-2 rev   Metallic materials - Instrumented indentation test for           4020 MECMA
                                      hardness and materials parameters - Part 2: Verification and
                                      calibration of testing machines (ISO/DIS 14577-2:2012)

863   42 14577 prEN ISO 14577-3 rev   Metallic materials - Instrumented indentation test for           4020 MECMA
                                      hardness and materials parameters - Part 3: Calibration of
                                      reference blocks (ISO/DIS 14577-3:2012)
864   42 18265 prEN ISO 18265         Metallic materials - Conversion of hardness values (ISO/DIS      4020 MECMA
                                      18265:2011)
865   45 10071 EN 10071:2012          Chemical analysis of ferrous materials - Determination of        5020 MECMA
                                      manganese in steels and irons - Electrometric titration
                                      method
866   45 10200 EN 10200:2012          Chemical analysis of ferrous materials - Determination of        5020 MECMA
                                      boron in steels - Spectrophotometric method
867   45 10261 FprCEN/TR 10261        Iron and steel - European standards for the determination of     5020 MECMA
                                      chemical composition
868   45 10317 FprCEN/TR 10317        European certified reference materials (EURONORM-CRMs)           5020 MECMA
                                      for the determination of the chemical composition of iron and
                                      steel products prepared under the auspices of the European
                                      Committee for Iron and Steel Standardization (ECISS)

869   45 10350 FprCEN/TR 10350        Analysis of steels and irons - Internal laboratory procedure     5020 MECMA
                                      for checking the accuracy of an analytical method by using
                                      Certified Reference Materials
870   45 10355 prEN 10355             Chemical analysis of ferrous materials - Inductively coupled     4020 MECMA
                                      plasma optical emission spectrometric analysis of unalloyed
                                      and low alloyed steels - Determination of Si, Mn, P, Cu, Ni,
                                      Cr, Mo and Sn [Routine method]
871   46   2739 EN ISO 2739:2012      Sintered metal bushings - Determination of radial crushing       5020 MECMA
                                      strength (ISO 2739:2012)
872   46   5755 EN ISO 5755:2012      Sintered metal materials - Specifications (ISO 5755:2012)        5020 MECMA

873   46   7625 FprEN ISO 7625        Sintered metal materials, excluding hardmetals - Preparation     5020 MECMA
                                      of samples for chemical analysis for determination of carbon
                                      content (ISO/FDIS 7625:2012)
874   46 13517 prEN ISO 13517         Metallic powders - Determination of flowrate by means of a       4020 MECMA
                                      calibrated funnel (Gustavsson flowmeter) (ISO/DIS
                                      13517:2012)
875   46 13944 FprEN ISO 13944        Lubricated metal-powder mixes - Determination of lubricant       5020 MECMA
                                      content - Soxhlet extraction method (ISO/FDIS 13944:2012)

876   47    877 prEN 877 rev          Cast iron pipes and fittings, their joints and accessories for   4020 MECMA
                                      the evacuation of water from buildings - Requirements, test
                                      methods and quality assurance
877   47 1369 EN 1369:2012            Founding - Magnetic particle testing                             5020 MECMA
878   47 12842 EN 12842:2012          Ductile iron fittings for PVC-U or PE piping systems -           5020 MECMA
                                      Requirements and test methods
879   47 16470 FprCEN/TR 16470:2012   Environmental aspects of ductile iron pipe systems for water     5020 MECMA
                                      and sewerage aspects applications
880   55   6433 EN ISO 6433:2012      Technical product documentation - Part references (ISO           5020 MECMA
                                      6433:2012)
881   55   7010 EN ISO 7010:2012      Graphical symbols - Safety colours and safety signs -            5020 MECMA
                                      Registered safety signs (ISO 7010:2011)
882   55 10209 EN ISO 10209:2012      Technical product documentation - Vocabulary - Terms             5020 MECMA
                                      relating to technical drawings, product definition and related
                                      documentation (ISO 10209:2012)
883   55 10628 FprEN ISO 10628-2      Diagrams for the chemical and petrochemical industry - Part      5020 MECMA
                                      2: Graphical symbols (ISO/FDIS 10628-2:2012)
884   56 15224 EN 15224:2012          Health care services - Quality management systems -              5020 MECMA
                                      Requirements based on EN ISO 9001:2008
885   57   1325 prEN 1325             Value Management - Vocabulary                                    4020 MECMA
886   57 16271 FprEN 16271                Value management - Functional expression of the need and          5020 MECMA
                                          functional performance specification - Requirements for
                                          expressing and validating the need to be satisfied within the
                                          process of purchasing or obtaining a product


887   58   1101 FprEN ISO 1101            Geometrical product specifications (GPS) - Geometrical           5020 MECMA
                                          tolerancing - Tolerances of form, orientation, location and run-
                                          out (ISO 1101:2012)
888   58   1938 prEN ISO 1938-1           Geometrical product specifications (GPS) - Dimensional            4020 MECMA
                                          measuring equipment - Part 1: Plain limit gauges of linear
                                          size (ISO/DIS 1938-1:2011)
889   58   2538 prEN ISO 2538-1           Geometrical product specifications (GPS) - Wedges - Part 1:       4020 MECMA
                                          Series of angles and slopes (ISO/DIS 2538-1:2012)

890   58   2538 prEN ISO 2538-2           Geometrical product specifications (GPS) - Wedges - Part 2:       4020 MECMA
                                          Dimensioning and tolerancing (ISO/DIS 2538-2:2012)

891   58   3040 EN ISO 3040:2012          Geometrical product specifications (GPS) - Dimensioning           5020 MECMA
                                          and tolerancing - Cones (ISO 3040:2009)
892   58   5436 FprEN ISO 5436-2          Geometrical product specifications (GPS) - Surface texture:       5020 MECMA
                                          Profile method; Measurement standards - Part 2: Software
                                          measurement standards (ISO/FDIS 5436-2:2012)

893   58 10360 prEN ISO 10360-8           Geometrical product specifications (GPS) - Acceptance and         4020 MECMA
                                          reverification tests for coordinate measuring machines
                                          (CMM) - Part 8: CMMs with optical distance sensors
                                          (ISO/DIS 10360-8:2012)
894   58 10360 prEN ISO 10360-8           Geometrical product specifications (GPS) - Acceptance and         4020 MECMA
                                          reverification tests for coordinate measuring machines
                                          (CMM) - Part 8: CMMs with optical distance sensors
                                          (ISO/DIS 10360-8:2012)
895   58 10360 prEN ISO 10360-9           Geometrical product specifications (GPS) - Acceptance and         4020 MECMA
                                          reverification tests for coordinate measuring machines
                                          (CMM) - Part 9: CMMs with multiple probing systems
                                          (ISO/DIS 10360-9:2011)
896   58 13102 EN ISO 13102:2012          Geometrical product specifications (GPS) - Dimensional            5020 MECMA
                                          measuring equipment: Electronic digital-indicator gauge -
                                          Design and metrological characteristics (ISO 13102:2012)

897   58 13225 EN ISO 13225:2012          Geometrical product specifications (GPS) - Dimensional            5020 MECMA
                                          measuring equipment; Height gauges - Design and
                                          metrological characteristics (ISO 13225:2012)
898   58 14253 EN ISO 14253-1:1998/prA1   Geometrical Product Specifications (GPS) - Inspection by 4020 MECMA
                                          measurement of workpieces and measuring equipment - Part
                                          1: Decision rules for proving conformance or non-
                                          conformance with specifications (ISO 14253-1:1998/DAM
                                          1:2012)
899   58 16610 EN ISO 16610-21:2012       Geometrical product specifications (GPS) - Filtration - Part      5020 MECMA
                                          21: Linear profile filters: Gaussian filters (ISO 16610-
                                          21:2011)
900   58 16610 prEN ISO 16610-1           Geometrical product specifications (GPS) - Filtration - Part 1:   4020 MECMA
                                          Overview and basic concepts (ISO/DIS 16610-1:2012)

901   58 16610 prEN ISO 16610-20          Geometrical product specifications (GPS) - Filtration - Part      4020 MECMA
                                          20: Linear profile filters: Basic concepts (ISO/DIS 16610-
                                          20:2012)
902   58 16610 prEN ISO 16610-22          Geometrical product specifications (GPS) - Filtration - Part      4020 MECMA
                                          22: Linear profile filters: Spline filters (ISO/DIS 16610-
                                          22:2012)
903   58 16610 prEN ISO 16610-29          Geometrical product specifications (GPS) - Filtration - Part      4020 MECMA
                                          29: Linear profile filters: Spline wavelets (ISO/DIS 16610-
                                          29:2012)
904   58 16610 prEN ISO 16610-40     Geometrical product specifications (GPS) - Filtration - Part     4020 MECMA
                                     40: Morphological profile filters: Basic concepts (ISO/DIS
                                     16610-40:2012)
905   58 16610 prEN ISO 16610-41     Geometrical product specifications (GPS) - Filtration - Part     4020 MECMA
                                     41: Morphological profile filters: Disk and horizontal line-
                                     segment filters (ISO/DIS 16610-41:2012)
906   58 16610 prEN ISO 16610-49     Geometrical product specifications (GPS) - Filtration - Part     4020 MECMA
                                     49: Morphological profile filters: Scale space techniques
                                     (ISO/DIS 16610-49:2012)
907   58 16610 prEN ISO 16610-71     Geometrical product specifications (GPS) - Filtration - Part     4020 MECMA
                                     71: Robust areal filters: Gaussian regression filters (ISO/DIS
                                     16610-71:2012)
908   58 16610 prEN ISO 16610-85     Geometrical product specifications (GPS) - Filtration - Part     4020 MECMA
                                     85: Areal morphological: Segmentation (ISO/DIS 16610-
                                     85:2012)
909   58 17450 FprEN ISO 17450-2     Geometrical product specifications (GPS) - General concepts 5020 MECMA
                                     - Part 2: Basic tenets, specifications, operators, uncertainties
                                     and ambiguities (ISO/FDIS 17450-2:2012)

910   58 25178 EN ISO 25178-3:2012   Geometrical product specifications (GPS) - Surface texture:      5020 MECMA
                                     Areal - Part 3: Specification operators (ISO 25178-3:2012)

911   58 25178 FprEN ISO 25178-71    Geometrical product specifications (GPS) - Surface texture:      5020 MECMA
                                     Areal - Part 71: Software measurement standards (ISO/FDIS
                                     25178-71:2012)
912   58 25178 prEN ISO 25178-605    Geometrical product specifications (GPS) - Surface texture:      4020 MECMA
                                     Areal - Part 605: Nominal characteristics of non-contact
                                     (point autofocus probe) instruments (ISO/DIS 25178-
                                     605:2011)
913   58 25178 prEN ISO 25178-70     Geometrical product specification (GPS) - Surface texture:       4020 MECMA
                                     Areal - Part 70: Physical measurement standards (ISO/DIS
                                     25178-70:2011)
914   59    898 EN ISO 898-2:2012    Mechanical properties of fasteners made of carbon steel and      5020 MECMA
                                     alloy steel - Part 2: Nuts with specified property classes -
                                     Coarse thread and fine pitch thread (ISO 898-2:2012)

915   59    898 EN ISO 898-5:2012    Mechanical properties of fasteners made of carbon steel and      5020 MECMA
                                     alloy steel - Part 5: Set screws and similar threaded
                                     fasteners with specified hardness classes - Coarse thread
                                     and fine pitch thread (ISO 898-5:2012)
916   59    898 FprEN ISO 898-1      Mechanical properties of fasteners made of carbon steel and      5020 MECMA
                                     alloy steel - Part 1: Bolts, screws and studs with specified
                                     property classes - Coarse thread and fine pitch thread
                                     (ISO/FDIS 898-1:2012)
917   59   1337 EN 1337-1:2012       Structural bearings - Part 1: General                            5020 MECMA
918   59   1891 prEN ISO 1891-2      Fasteners - Terminology - Part 2: Vocabulary and definitions     4020 MECMA
                                     for coatings (ISO/DIS 1891-2:2012)
919   59   4032 FprEN ISO 4032       Hexagon nuts, style 1 - Product grades A and B (ISO/FDIS         5020 MECMA
                                     4032:2012)
920   59   4033 FprEN ISO 4033       Hexagon nuts, style 2 - Product grades A and B (ISO/FDIS         5020 MECMA
                                     4033:2012)
921   59   4034 FprEN ISO 4034       Hexagon nuts - Product grade C (ISO/FDIS 4034:2012)              5020 MECMA
922   59   4035 FprEN ISO 4035       Hexagon thin nuts (chamfered) - Product grades A and B           5020 MECMA
                                     (ISO/FDIS 4035:2012)
923   59   4036 FprEN ISO 4036       Hexagon thin nuts (unchamfered) - Product grade B                5020 MECMA
                                     (ISO/FDIS 4036:2012)
924   59   7040 FprEN ISO 7040 rev   Prevailing torque type hexagon nuts (with non-metallic           5020 MECMA
                                     insert), style 1 - Property classes 5, 8 and 10 (ISO/FDIS
                                     7040:2012)
925   59   7042 FprEN ISO 7042 rev   Prevailing torque type all-metal hexagon nuts, style 2 -         5020 MECMA
                                     Property classes 5, 8, 10 and 12 (ISO/FDIS 7042:2012)
926   59   7719 FprEN ISO 7719 rev   Prevailing torque type all-metal hexagon nuts, style 1 -         5020 MECMA
                                     Property classes 5, 8 and 10 (ISO/FDIS 7719:2012)
927   59   8673 FprEN ISO 8673             Hexagon nuts, style 1, with metric fine pitch thread - Product   5020 MECMA
                                           grades A and B (ISO/FDIS 8673:2012)
928   59   8674 FprEN ISO 8674             Hexagon nuts, style 2, with metric fine pitch thread - Product   5020 MECMA
                                           grades A and B (ISO/FDIS 8674:2012)
929   59   8675 FprEN ISO 8675             Hexagon thin nuts (chamfered) with metric fine pitch thread -    5020 MECMA
                                           Product grades A and B (ISO/FDIS 8675:2012)
930   59 10511 FprEN ISO 10511 rev         Prevailing torque type hexagon thin nuts (with non-metallic      5020 MECMA
                                           insert) (ISO/FDIS 10511:2012)
931   59 10512 FprEN ISO 10512 rev         Prevailing torque type hexagon nuts (with non-metallic           5020 MECMA
                                           insert), style 1, with metric fine pitch thread - Property
                                           classes 6, 8 and 10 (ISO/FDIS 10512:2012)
932   59 10513 FprEN ISO 10513             Prevailing torque type all-metal hexagon nuts, style 2, with     5020 MECMA
                                           metric fine pitch thread - Property classes 8, 10 and 12
                                           (ISO/FDIS 10513:2012)
933   59 10642 EN ISO 10642:2004/FprA1     Hexagon socket countersunk head screws (ISO                      5020 MECMA
                                           10642:2004/FDAM 1:2012)
934   59 14581 prEN ISO 14581              Fasteners - Hexalobular socket countersunk flat head screws      4020 MECMA
                                           (ISO/DIS 14581:2012)
935   59 14582 prEN ISO 14582              Hexalobular socket countersunk head screws, high head            4020 MECMA
                                           (ISO/DIS 14582:2012)
936   59 16047 EN ISO 16047:2005/A1:2012   Fasteners - Torque/clamp force testing (ISO                      5020 MECMA
                                           16047:2005/Amd 1:2012)
937   66    892 EN 892:2012                Mountaineering equipment - Dynamic mountaineering ropes -        5020 MECMA
                                           Safety requirements and test methods
938   66    926 prEN 926-2                 Paragliding equipment - Paragliders - Part 2: Requirements       4020 MECMA
                                           and test methods for classifying flight safety characteristics

939   66 12503 FprEN 12503-1:2012          Sports mats - Part 1: Gymnastic mats, safety requirements        5020 MECMA

940   66 13200 EN 13200-1:2012             Spectator facilities - Part 1: General characteristics for     5020 MECMA
                                           spectator viewing area
941   66 13200 FprEN 13200-6               Spectator facilities - Part 6 : Demountable (temporary) stands 5020 MECMA

942   66 13200 prEN 13200-7                Spectator facilities - Part 7: Entry and exit elements and       4020 MECMA
                                           routes
943   66 13537 EN 13537:2012               Requirements for sleeping bags                                   5020 MECMA
944   66 15151 EN 15151-1:2012             Mountaineering equipment - Braking devices - Part 1:             5020 MECMA
                                           Braking devices with manually assisted locking, safety
                                           requirements and test methods
945   66 15151 EN 15151-2:2012             Mountaineering equipment - Braking devices - Part 2:             5020 MECMA
                                           Manual braking devices, safety requirements and test
                                           methods
946   66 16396 CEN/TR 16396:2012           Playground equipment for children - Replies to requests for      5020 MECMA
                                           interpretation of EN 1176:2008 and its parts
947   66 16467 FprCEN/TR 16467             Playground equipment accessible for all children                 5020 MECMA
948   66 20957 prEN ISO 20957-1 rev        Stationary training equipment - Part 1: General safety           4020 MECMA
                                           requirements and test methods (ISO/DIS 20957-1:2012)
949   77    690 prEN 690                   Agricultural machinery - Manure spreaders - Safety               4020 MECMA
950   77   4254 EN ISO 4254-12:2012        Agricultural machinery - Safety - Part 12: Rotary disc and       5020 MECMA
                                           drum mowers and flail mowers (ISO 4254-12:2012)

951   77   4254 prEN ISO 4254-1            Agricultural machinery - Safety - Part 1: General                4020 MECMA
                                           requirements (ISO/DIS 4254-1:2011)
952   77 10517 EN ISO 10517:2009/prA1      Powered hand-held hedge trimmers - Safety (ISO                   4020 MECMA
                                           10519:2009/DAM 1:2012)
953   77 15503 EN 15503:2009/prA1          Garden equipment - Garden blowers, vacuums and                   4020 MECMA
                                           blower/vacuums - Safety
954   77 16246 FprEN 16246                 Agricultural machinery - Backhoes - Safety                       5020 MECMA
955   77 19932 prEN ISO 19932-1            Equipment for crop protection - Knapsack sprayers - Part 1:      4020 MECMA
                                           Safety and environmental requirements (ISO/DIS 19932-
                                           1:2011)
956   77 19932 prEN ISO 19932-2            Equipment for crop protection - Knapsack sprayers - Part 2:      4020 MECMA
                                           Test methods (ISO/DIS 19932-2:2011)
957   78   1645 EN 1645-1:2012             Leisure accommodation vehicles - Caravans - Part 1:               5020 MECMA
                                           Habitation requirements relating to health and safety
958   78   1646 EN 1646-1:2012             Leisure accommodation vehicles - Motor caravans - Part 1:         5020 MECMA
                                           Habitation requirements relating to health and safety

959   78   1647 EN 1647:2012               Leisure accommodation vehicles - Caravan holiday homes -          5020 MECMA
                                           Habitation requirements relating to health and safety

960   78   1648 EN 1648-1:2012             Leisure accommodation vehicles - 12 V direct current extra        5020 MECMA
                                           low voltage electrical installations - Part 1: Caravans

961   78   1648 EN 1648-2:2012             Leisure accommodation vehicles - 12 V direct current extra        5020 MECMA
                                           low voltage electrical installations - Part 2: Motor caravans

962   78 12645 prEN 12645                  Tyre pressure measuring instruments - Apparatus for               4020 MECMA
                                           inspection of pressure and/or inflation of tyres for motor
                                           vehicles - Metrology, requirements and testing
963   78 15918 EN 15918:2011/FprA1         Cycles - Cycle trailers - Safety requirements and test         5020 MECMA
                                           methods
964   78 16029 EN 16029:2012               Ride-on, motorized vehicles intended for the transportation of 5020 MECMA
                                           persons and not intended for use on public roads - Single-
                                           track two-wheel motor vehicles - Safety requirements and
                                           test methods
965   78 16054 EN 16054:2012               BMX bicycles - Safety requirements and test methods               5020 MECMA
966   78 16230 FprEN 16230-1               Leisure karts - Part 1: Safety requirements and test methods      5020 MECMA
                                           for karts
967   78 18541 prEN ISO 18541-1            Road vehicles - Standardized access to automotive repair          4020 MECMA
                                           and maintenance information (RMI) - Part 1: General
                                           information and use case definition (ISO/DIS 18541-1:2012)

968   78 18541 prEN ISO 18541-2            Road vehicles - Standardized access to automotive repair          4020 MECMA
                                           and maintenance information (RMI) - Part 2: Technical
                                           requirements (ISO/DIS 18541-2:2012)
969   78 18541 prEN ISO 18541-3            Road vehicles - Standardized access to automotive repair          4020 MECMA
                                           and maintenance information (RMI) - Part 3: Functional user
                                           interface requirements (ISO/DIS 18541-3:2012)

970   78 18542 FprEN ISO 18542-1           Road vehicles - Standardized repair and maintenance               5020 MECMA
                                           information (RMI) terminology - Part 1: General information
                                           and use case definition (ISO/FDIS 18542-1:2012)

971   78 18542 prEN ISO 18542-2            Road vehicles - Standardized repair and maintenance               4020 MECMA
                                           information (RMI) terminology - Part 2: Standardized process
                                           implementation requirements, registration authority (ISO/DIS
                                           18542-2:2012)
972   79 23125 EN ISO 23125:2010/A1:2012   Machine tools - Safety - Turning machines - Amendment 1        5020 MECMA
                                           (ISO 23125:2010/Amd 1:2012)
973   84    284 FprEN ISO 284              Conveyor belts - Electrical conductivity - Specification and   5020 MECMA
                                           test method (ISO/FDIS 284:2012)
974   84    340 FprEN ISO 340 rev          Conveyor belts - Laboratory scale flammability characteristics 5020 MECMA
                                           - Requirements and test method (ISO/FDIS 340:2012)

975   84   1120 FprEN ISO 1120             Conveyor belts - Determination of strength of mechanical          5020 MECMA
                                           fastenings - Static test method (ISO/FDIS 1120:2012)

976   84   1554 EN 1554:2012               Conveyor belts - Drum friction testing                            5020 MECMA
977   84   9856 EN ISO 9856:2003/A1:2012   Conveyor belts - Determination of elastic and permanent           5020 MECMA
                                           elongation and calculation of elastic modulus (ISO
                                           9856:2003/Amd 1:2012)
978   84 12881 prEN 12881-1                Conveyor belts - Fire simulation flammability testing - Part 1:   4020 MECMA
                                           Propane burner tests
979   84 14890 FprEN ISO 14890 rev         Conveyor belts - Specification for rubber- or plastics-covered    5020 MECMA
                                           conveyor belts of textile construction for general use
                                           (ISO/FDIS 14890:2012)
 980   84 15147 FprEN ISO 15147 rev              Light conveyor belts - Tolerances on widths and lengths of            5020 MECMA
                                                 cut light conveyor belts (ISO/FDIS 15147:2012)

 981   85     81 EN 81-21:2009/FprA1             Safety rules for the construction and installation of lifts - Lifts   5020 MECMA
                                                 for the transport of persons and goods - Part 21: New
                                                 passenger and goods passenger lifts in existing builiding

 982   85     81 prEN 81-20                      Safety rules for the construction and installation of lifts - Lifts   4020 MECMA
                                                 for the transport of persons and goods - Part 20: Passenger
                                                 and goods passenger lifts
 983   85     81 prEN 81-50                      Safety rules for the construction and installation of lifts -         4020 MECMA
                                                 Examinations and tests - Part 50: Design rules, calculations,
                                                 examinations and tests of lift components
 984   85     81 prEN 81-82                      Safety rules for the construction and installation of lifts -         4020 MECMA
                                                 Existing lifts - Part 82: Rules for the improvement of the
                                                 accessibility of existing lifts for persons including persons
                                                 with disability
 985   85    280 FprEN 280                       Mobile elevating work platforms - Design calculations -               5020 MECMA
                                                 Stability criteria - Construction - Safety - Examinations and
                                                 tests
 986   85   1459 prEN 1459-3                     Rough-terrain trucks - Safety requirements and verification -    4020 MECMA
                                                 Part 3: Additional requirements for variable reach trucks fitted
                                                 with elevating work platform
 987   85   1755 EN 1755:2000+A1:2009/FprA2 Safety of industrial trucks - Operation in potentially explosive           5020 MECMA
                                            atmospheres - Use in flammable gas, vapour, mist and dust

 988   85   1808 prEN 1808 rev                   Suspended access equipment - Design calculations, stability           4020 MECMA
                                                 criteria and construction - Examinations and tests

 989   85   3691 EN ISO 3691-1:2012              Industrial trucks - Safety requirements and verification - Part       5020 MECMA
                                                 1: Self-propelled industrial trucks, other than driverless
                                                 trucks, variable-reach trucks and burden-carrier trucks (ISO
                                                 3691-1:2011)
 990   85 12015 prEN 12015                       Electromagnetic compatibility - Product family standard for           4020 MECMA
                                                 lifts, escalators ans moving walks - Emission
 991   85 12016 prEN 12016                       Electromagnetic compatibility - Product family standard for           4020 MECMA
                                                 lifts, escalators and moving walks - Immunity
 992   85 12159 EN 12159:2012                    Builders hoists for persons and materials with vertically             5020 MECMA
                                                 guided cages
 993   85 12397 prEN 12397                       Safety requirements for cableway installations designed to            4020 MECMA
                                                 carry persons - Operation
 994   85 12999 EN 12999:2011/FprA1              Cranes - Loader cranes                                                5020 MECMA
 995   85 13001 EN 13001-3-1:2012                Cranes - General Design - Part 3-1: Limit States and proof            5020 MECMA
                                                 competence of steel structure
 996   85 13796 prEN 13796-1                     Safety requirements for cableway installations designed to            4020 MECMA
                                                 carry persons - Carriers - Part 1: Grips, carrier trucks, on-
                                                 board brakes, cabins, chairs, carriages, maintenance
                                                 carriers, tow-hangers
 997   85 13796 prEN 13796-2                     Safety requirements for cableway installations designed to            4020 MECMA
                                                 carry persons - Carriers - Part 2: Slipping resistance tests for
                                                 grips
 998   85 13796 prEN 13796-3                     Safety requirements for cableway installations designed to            4020 MECMA
                                                 carry persons - Carriers - Part 3: Fatigue testing

 999   85 14798 FprEN ISO 14798                  Lifts (elevators), escalators and moving walks - Risk                 5020 MECMA
                                                 assessment and reduction methodology (ISO 14798:2009)

1000   85 16307 FprEN 16307-1                    Industrial trucks - Safety requirements and verification - Part 5020 MECMA
                                                 1: Supplementary requirements for self-propelled industrial
                                                 trucks, other than driverless trucks, variable-reach trucks and
                                                 burden-carrier trucks
1001   85 25745 FprEN ISO 25745-1                Energy performance of lifts, escalators and moving walks -            5020 MECMA
                                                 Part 1: Energy measurement and verification (ISO/FDIS
                                                 25745-1:2012)
1002   88    131 EN 131-2:2010/FprA1    Ladders - Part 2: Requirements, testing, marking                  5020 MECMA
1003   88    131 prEN 131-7             Ladders - Part 7: Mobile ladders with platform                    4020 MECMA
1004   89   1092 EN 1092-1:2007/FprA1   Flanges and their joints - Circular flanges for pipes, valves,    5020 MECMA
                                        fittings and accessories, PN designated - Part 1: Steel
                                        flanges
1005   89   1591 prEN 1591-1 rev        Flanges and their joints - Design rules for gasketed circular     4020 MECMA
                                        flange connections - Part 1: Calculation
1006   89   1591 prEN 1591-4            Flanges and their joints - Design rules for gasketed circular     4020 MECMA
                                        flange connections - Part 4: Qualification of personnel
                                        competency in the assembly of bolted joints fitted to
                                        equipment subject to the Pressure Equipment Directive


1007   89   4126 FprEN ISO 4126-1 rev   Safety devices for protection against excessive pressure -        5020 MECMA
                                        Part 1: Safety valves (ISO/FDIS 4126-1:2012)

1008   89   4126 FprEN ISO 4126-4       Safety devices for protection against excessive pressure -        5020 MECMA
                                        Part 4: Pilot-operated safety valves (ISO/DIS 4126-4:2009)

1009   89   4126 FprEN ISO 4126-5 rev   Safety devices for protection against excessive pressure -        5020 MECMA
                                        Part 5: Controlled safety pressure relief systems (CSPRS)
                                        (ISO/FDIS 4126-5:2012)
1010   89 12266 EN 12266-1:2012         Industrial valves - Testing of metallic valves - Part 1:          5020 MECMA
                                        Pressure tests, test procedures and acceptance criteria -
                                        Mandatory requirements
1011   89 12516 prEN 12516-1 rev        Industrial valves - Shell design strength - Part 1: Tabulation    4020 MECMA
                                        method for steel valve shells
1012   89 12516 prEN 12516-2 rev        Industrial valves - Shell design strength - Part 2: Calculation   4020 MECMA
                                        method for steel valve shells
1013   89 12516 prEN 12516-4 rev        Industrial valves - Shell design strength - Part 4: Calculation   4020 MECMA
                                        method for valve shells manufactured in metallic materials
                                        other than steel
1014   89 12560 prEN 12560-2            Flanges and their joints - Dimensions of gaskets for Class-       4020 MECMA
                                        designated flanges - Part 2: Spiral wound gaskets for use
                                        with steel flanges
1015   89 13555 prEN 13555 rev          Flanges and their joints - Gasket parameters and test             4020 MECMA
                                        procedures relevant to the design rules for gasketed circular
                                        flange connections
1016   89 13774 FprEN 13774             Valves for gas distribution systems with maximum operating        5020 MECMA
                                        pressure less than or equal to 16 bar - Performance
                                        requirements
1017   89 14141 FprEN 14141             Valves for natural gas transportation in pipelines -              4020 MECMA
                                        Performance requirements and tests
1018 102    2419 EN ISO 2419:2012       Leather - Physical and mechanical tests - Sample                  5020 MECMA
                                        preparation and conditioning (ISO 2419:2012)
1019 102 11640 FprEN ISO 11640          Leather - Tests for colour fastness - Colour fastness to          5020 MECMA
                                        cycles of to-and-fro rubbing (ISO/FDIS 11640:2012)
1020 102 11641 FprEN ISO 11641          Leather - Tests for colour fastness - Colour fastness to          5020 MECMA
                                        perspiration (ISO/FDIS 11641:2012)
1021 102 11642 FprEN ISO 11642          Leather - Tests for colour fastness - Colour fastness to water    5020 MECMA
                                        (ISO/FDIS 11642:2012)
1022 102 11646 prEN ISO 11646 rev       Leather - Measurement of area (ISO/DIS 11646:2012)                4020 MECMA
1023 102 13336 EN 13336:2012            Leather - Upholstery leather characteristics - Guide for          5020 MECMA
                                        selection of leather for furniture
1024 102 14088 EN ISO 14088:2012        Leather - Chemical tests - Quantitative analysis of tanning       5020 MECMA
                                        agents by filter method (ISO 14088:2012)
1025 102 14268 FprEN ISO 14268          Leather - Physical and mechanical tests - Determination of        5020 MECMA
                                        water vapour permeability (ISO/FDIS 14268:2012)
1026 102 14906 EN 14906:2012            Leather - Leather for automotive - Test methods and testing       5020 MECMA
                                        parameters
1027 102 16223 EN 16223:2012            Leather - Requirements for the designation and description        5020 MECMA
                                        of leather in upholstery and automotive interior applications

1028 102 16419 prEN 16419               Leather - Chamois leather - Classification and requirements       4020 MECMA
1029 102 17076 EN ISO 17076-1:2012      Leather - Determination of abrasion resistance - Part 1:         5020 MECMA
                                        Taber method (ISO 17076-1:2012)
1030 102 17130 prEN ISO 17130           Leather - Physical and mechanical tests - Determination of       4020 MECMA
                                        dimensional change (ISO/DIS 17130:2012)
1031 102 17131 EN ISO 17131:2012        Leather - Identification of leather with microscopy (ISO         5020 MECMA
                                        17131:2012)
1032 102 17489 prEN ISO 17489           Leather - Chemical tests - Determination of tan content in       4020 MECMA
                                        tanning agents (ISO/DIS 17489:2012)
1033 102 17502 prEN ISO 17502           Leather - Determination of surface reflectance (ISO/DIS          4020 MECMA
                                        17502:2012)
1034 102 20433 FprEN ISO 20433          Leather - Tests for colour fastness - Colour fastness to         5020 MECMA
                                        crocking (ISO/FDIS 20433:2012)
1035 102 26082 EN ISO 26082-1:2012      Leather - Physical and mechanical test methods for the           5020 MECMA
                                        determination of soiling - Part 1: Rubbing (Martindale)
                                        method (ISO 26082-1:2012)
1036 102 26082 EN ISO 26082-2:2012      Leather - Physical and mechanical test methods for the           5020 MECMA
                                        determination of soiling - Part 2: Tumbling method (ISO
                                        26082-2:2012)
1037 103    105 EN ISO 105-A11:2012     Textiles - Tests for colour fastness - Part A11: Determination   5020 MECMA
                                        of colour fasness grades by digital imaging techniques (ISO
                                        105-A11:2012)
1038 103    105 FprEN ISO 105-E01 rev   Textiles - Tests for colour fastness - Part E01: Colour          5020 MECMA
                                        fastness to water (ISO/FDIS 105-E01:2012)
1039 103    105 FprEN ISO 105-E02 rev   Textiles - Tests for colour fastness - Part E02: Colour          5020 MECMA
                                        fastness to sea water (ISO/FDIS 105-E02:2012)
1040 103    105 FprEN ISO 105-E04 rev   Textiles - Tests for colour fastness - Part E04: Colour          5020 MECMA
                                        fastness to perspiration (ISO/FDIS 105-E04:2012)
1041 103   1140 EN ISO 1140:2012        Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO    5020 MECMA
                                        1140:2012)
1042 103   1141 EN ISO 1141:2012        Fibre ropes - Polyester - 3-, 4-, 8- and 12-strand ropes (ISO    5020 MECMA
                                        1141:2012)
1043 103   1346 EN ISO 1346:2012        Fibre ropes - Polypropylene split film, monofilament and         5020 MECMA
                                        multifilament (PP2) and polypropylene high-tenacity
                                        multifilament (PP3) - 3-, 4-, 8- and 12-strand ropes (ISO
                                        1346:2012)
1044 103   1833 prEN ISO 1833-22        Textiles - Quantitative chemical analysis - Part 22: Mixtures    4020 MECMA
                                        of viscose or certain types of cupro or modal or lyocell and
                                        flax fibres (method using formic acid and zinc chloride)
                                        (ISO/DIS 1833-22:2011)
1045 103   1833 prEN ISO 1833-25        Textiles - Quantitative chemical analysis - Part 25: Mixtures    4020 MECMA
                                        of polyester and some other fibres (method using
                                        trichloracetic acid and chloroform) (ISO/DIS 1833-25:2011)

1046 103   1833 prEN ISO 1833-26        Textiles - Quantitative chemical analysis - Part 26: Mixtures    4020 MECMA
                                        of melamine and cotton or aramide fibres (method using hot
                                        formic acid) (ISO/DIS 1833-26:2011)
1047 103   2076 prEN ISO 2076           Textiles - Man-made fibres - Generic names (ISO/DIS              4020 MECMA
                                        2076:2012)
1048 103   4920 EN ISO 4920:2012        Textile fabrics - Determination of resistance to surface         5020 MECMA
                                        wetting (spray test) (ISO 4920:2012)
1049 103   6330 EN ISO 6330:2012        Textiles - Domestic washing and drying procedures for textile    5020 MECMA
                                        testing (ISO 6330:2012)
1050 103 13015 prEN ISO 13015           Woven fabrics - Distortion - Determination of skew and bow       4020 MECMA
                                        (ISO/DIS 13015:2011)
1051 103 13402 prEN 13402-3             Size designation of clothes - Part 3: Measurements and           4020 MECMA
                                        intervals
1052 103 14362 EN 14362-3:2012          Textiles - Methods for determination of certain aromatic         5020 MECMA
                                        amines derived from azo colorants - Part 3: Detection of the
                                        use of certain azo colorants, which may release 4-
                                        aminoazobenzene
1053 103 15618 EN 15618:2009/FprA1      Rubber- or plastic-coated fabrics - Upholstery fabrics -         5020 MECMA
                                        Classification and methods of test
1054 103 16315 prEN 16315              Textiles - Silk woven fabrics for women’s wears, foulards and 4020 MECMA
                                       scarves, ties - Requirements and test methods

1055 103 16373 prEN ISO 16373-2        Textiles - Dyestuffs - Part 2: General method for the               4020 MECMA
                                       determination of extractable dyestuffs including allergenic
                                       and carcinogenic substances (ISO/DIS 16373-2:2012)

1056 103 16422 CEN/TR 16422:2012       Classification of thermoregulatory properties                       5020 MECMA
1057 103 16446 FprCEN/TR 16446:2012    Textiles - Safety of children's clothing - Guidance on the use      5020 MECMA
                                       of EN 14682:2007 Cords and drawstrings on children's
                                       clothing - Specifications
1058 103 20743 prEN ISO 20743          Textiles - Determination of antibacterial activity of textile 4020 MECMA
                                       products (ISO/DIS 20743:2012)
1059 103 30023 EN ISO 30023:2012       Textiles - Qualification symbols for labelling workwear to be 5020 MECMA
                                       industrially laundered (ISO 30023:2010)
1060 103 31092 EN 31092:1993/A1:2012   Textiles - Physiological effects - Measurement of thermal and 5020 MECMA
                                       water-vapour resistance under steady-state conditions
                                       (sweating guarded-hotplate test) - Amendment 1 (ISO
                                       11092:1993/Amd 1:2012)
1061 105 12945 prEN 12945 rev          Liming materials - Determination of neutralizing value -          4020 MECMA
                                       Titrimetric methods
1062 105 13368 EN 13368-2:2012         Fertilizers - Determination of chelating agents in fertilizers by 5020 MECMA
                                       chromatography - Part 2: Determination of Fe chelated by o,o-
                                       EDDHA, o,o-EDDHMA and HBED by ion pair
                                       chromatography
1063 105 13368 prEN 13368-1            Fertilizers - Determination of chelating agents in fertilizers by   4020 MECMA
                                       chromatography - Part 1: Determination of EDTA, HEEDTA
                                       and DTPA by ion chromatography
1064 105 13971 FprEN 13971:2012        Carbonate and silicate liming materials - Determination of          5020 MECMA
                                       reactivity - Potentiometric titration method with hydrochloric
                                       acid
1065 105 16195 EN 16195:2012           Fertilizers - Determination of chlorides in the absence of          5020 MECMA
                                       organic material
1066 105 16196 EN 16196:2012           Fertilizers - Manganimetric determination of extracted              5020 MECMA
                                       calcium following precipitation in the form of oxalate
1067 105 16197 EN 16197:2012           Fertilizers - Determination of magnesium by atomic                  5020 MECMA
                                       absorption spectrometry
1068 105 16198 EN 16198:2012           Fertilizers - Determination of magnesium by complexometry           5020 MECMA

1069 105 16199 EN 16199:2012           Fertilizers - Determination of the sodium extracted by flame-       5020 MECMA
                                       emission spectrometry
1070 105 16328 FprEN 16328             Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole             4020 MECMA
                                       phosphate (DMPP) - Method using high-performance liquid
                                       chromatography (HPLC)
1071 105 16328 FprEN 16328             Fertilizers - Determination of 3,4-dimethyl-1H-pyrazole             5020 MECMA
                                       phosphate (DMPP) - Method using high-performance liquid
                                       chromatography (HPLC)
1072 105 16357 prEN 16357              Carbonate liming materials - Determination of reactivity -          4020 MECMA
                                       Automatic titration method with citric acid
1073 105 16375 FprCEN/TS 16375         Liming materials - Determination of the amount of residual          5020 MECMA
                                       finely ground carbonate in soils - Volumetric method

1074 106 14644 EN ISO 14644-9:2012     Cleanrooms and associated controlled environments - Part 9: 5020 MECMA
                                       Classification of surface cleanliness by particle concentration
                                       (ISO 14644-9:2012)
1075 106 14644 prEN ISO 14644-8        Cleanrooms and associated controlled environments - Part 8: 4020 MECMA
                                       Classification of air cleanliness by chemical concentration
                                       (ISO/DIS 14644-8:2011)
1076 108     75 prEN ISO 75-1          Plastics - Determination of temperature of deflection under         4020 MECMA
                                       load - Part 1: General test method (ISO/DIS 75-1:2012)

1077 108     75 prEN ISO 75-2          Plastics - Determination of temperature of deflection under         4020 MECMA
                                       load - Part 2: Plastics and ebonite (ISO/DIS 75-2:2011)
1078 108    178 EN ISO 178:2010/prA1         Plastics - Determination of flexural properties (ISO              4020 MECMA
                                             178:2010/DAM 1:2011)
1079 108    179 EN ISO 179-2:1999/A1:2012    Plastics - Determination of Charpy impact properties - Part 2:    5020 MECMA
                                             Instrumented impact test - Amendment 1: Precision data
                                             (ISO 179-2:1997/Amd 1:2011)
1080 108    180 EN ISO 180:2000/prA2         Plastics - Determination of Izod impact strength -                4020 MECMA
                                             Amendment 2: Precision data (ISO 180:2000/DAM 2:2012)

1081 108    294 FprEN ISO 294-5              Plastics - Injection moulding of test specimens of                5020 MECMA
                                             thermoplastic materials - Part 5: Preparation of standard
                                             specimens for investigating anisotropy (ISO 294-5:2011)

1082 108    306 prEN ISO 306 rev             Plastics - Thermoplastic materials - Determination of Vicat 4020 MECMA
                                             softening temperature (VST)
1083 108    438 EN 438-9:2010/prA1           High-pressure decorative laminates (HPL) - Sheets based on 4020 MECMA
                                             thermosetting resins (usually called laminates) - Part 9 :
                                             Classification and specifications for alternative core
                                             laminates
1084 108    527 EN ISO 527-1:2012            Plastics - Determination of tensile properties - Part 1:          5020 MECMA
                                             General principles (ISO 527-1:2012)
1085 108    527 EN ISO 527-2:2012            Plastics - Determination of tensile properties - Part 2: Test     5020 MECMA
                                             conditions for moulding and extrusion plastics (ISO 527-
                                             2:2012)
1086 108    853 prEN 853 rev                 Rubber hoses and hose assemblies - Wire braid reinforced          4020 MECMA
                                             hydraulic type - Specification
1087 108    854 prEN 854 rev                 Rubber hoses and hose assemblies - Textile reinforced             4020 MECMA
                                             hydraulic type - Specification
1088 108    855 prEN 855 rev                 Plastics hoses and hose assemblies - Thermoplastics textile       4020 MECMA
                                             reinforced hydraulic type - Specification
1089 108    857 prEN 857 rev                 Rubber hoses and hose assemblies - Wire braid reinforced          4020 MECMA
                                             compact type for hydraulic applications - Specification

1090 108    899 EN ISO 899-1:2003/prA1       Plastics - Determination of creep behaviour - Part 1: Tensile     4020 MECMA
                                             creep (ISO 899-1:2003/DAM 1:2012)
1091 108    899 EN ISO 899-2:2003/prA1       Plastics - Determination of creep behaviour - Part 2: Flexural    4020 MECMA
                                             creep by three-point loading (ISO 899-2:2003/DAM 1:2012)

1092 108   1183 FprEN ISO 1183-1             Plastics - Methods for determining the density of non-cellular    5020 MECMA
                                             plastics - Part 1: Immersion method, liquid pyknometer
                                             method and titration method (ISO/FDIS 1183-1:2012)

1093 108   1360 prEN 1360 rev                Rubber and plastic hoses and hose assemblies for                  4020 MECMA
                                             measured fuel dispensing systems - Specification
1094 108   1452 FprCEN/TS 1452-7             Plastics piping systems for water supply and for buried and       5020 MECMA
                                             above-ground drainage and sewerage under pressure -
                                             Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance
                                             for the assessment of conformity
1095 108   1555 EN 1555-3:2010/FprA1         Plastics piping systems for the supply of gaseous fuels -         5020 MECMA
                                             Polyethylene (PE) - Part 3: Fittings
1096 108   1555 FprCEN/TS 1555-7             Plastics piping systems for the supply of gaseous fuels -         5020 MECMA
                                             Polyethylene (PE) - Part 7: Guidance for the assessment of
                                             conformity
1097 108   1622 EN ISO 1622-1:2012           Plastics - Polystyrene (PS) moulding and extrusion materials - 5020 MECMA
                                             Part 1: Designation system and basis for specifications (ISO
                                             1622-1:2012)
1098 108   1628 EN ISO 1628-1:2009/A1:2012   Plastics - Determination of the viscosity of polymers in dilute   5020 MECMA
                                             solution using capillary viscometers - Part 1: General
                                             principles - Amendment 1 (ISO 1628-1:2009/Amd 1:2012)

1099 108   1796 FprEN 1796:2012              Plastics piping systems for water supply with or without          5020 MECMA
                                             pressure - Glass-reinforced thermosetting plastics (GRP)
                                             based on unsaturated polyester resin (UP)
1100 108   1874 FprEN ISO 1874-2        Plastics - Polyamide (PA) moulding and extrusion materials -    5020 MECMA
                                        Part 2: Preparation of test specimens and determination of
                                        properties (ISO/FDIS 1874-2:2012)
1101 108   3385 prEN ISO 3385 rev       Flexible cellular polymeric materials - Determination of        4020 MECMA
                                        fatigue by constant-load pounding (ISO/DIS 3385:2012)
1102 108   3673 EN ISO 3673-2:2012      Plastics - Epoxy resins - Part 2: Preparation of test           5020 MECMA
                                        specimens and determination of properties of crosslinked
                                        epoxy resins (ISO 3673-2:2012)
1103 108   4892 prEN ISO 4892-2 rev     Plastics - Methods of exposure to laboratory light sources -    4020 MECMA
                                        Part 2: Xenon-arc lamps (ISO/DIS 4892-2:2012)

1104 108   5659 FprEN ISO 5659-2        Plastics - Smoke generation - Part 2: Determination of optical 5020 MECMA
                                        density by a single-chamber test (ISO/FDIS 5659-2:2012)

1105 108   7214 EN ISO 7214:2012        Cellular plastics - Polyethylene - Methods of test (ISO         5020 MECMA
                                        7214:2012)
1106 108   7792 FprEN ISO 7792-1        Plastics - Thermoplastic polyester (TP) moulding and            5020 MECMA
                                        extrusion materials - Part 1: Designation system and basis
                                        for specifications (ISO/FDIS 7792-1:2012)
1107 108   7792 FprEN ISO 7792-2:2012   Plastics - Thermoplastic polyester (TP) moulding and            5020 MECMA
                                        extrusion materials - Part 2: Preparation of test specimens
                                        and determination of properties (ISO/FDIS 7792-2:2012)

1108 108   9080 FprEN ISO 9080          Plastics piping and ducting systems - Determination of the      5020 MECMA
                                        long-term hydrostatic strength of thermoplastics materials in
                                        pipe form by extrapolation (ISO/FDIS 9080:2012)

1109 108 10147 FprEN ISO 10147          Pipes and fittings made of crosslinked polyethylene (PE-X) -    5020 MECMA
                                        Estimation of the degree of crosslinking by determination of
                                        the gel content (ISO 10147:2011)
1110 108 11296 FprEN ISO 11296-7        Plastics piping systems for renovation of underground non-      5020 MECMA
                                        pressure drainage and sewerage networks - Part 7: Lining
                                        with spirally-wound pipes (ISO 11296-7:2011)
1111 108 11297 prEN ISO 11297-1         Plastics piping systems for renovation of underground           4020 MECMA
                                        drainage and sewerage networks under pressure - Part 1:
                                        General (ISO/DIS 11297-1:2012)
1112 108 11297 prEN ISO 11297-3         Plastics piping systems for renovation of underground           4020 MECMA
                                        drainage and sewerage networks under pressure - Part 3:
                                        Lining with close-fit pipes (ISO/DIS 11297-3:2012)

1113 108 11299 FprEN ISO 11299-1        Plastics piping systems for renovation of underground gas       5020 MECMA
                                        supply networks - Part 1: General (ISO 11299-1:2011)

1114 108 11299 FprEN ISO 11299-3        Plastics piping systems for renovation of underground gas       5020 MECMA
                                        supply networks - Part 3: Lining with close-fit pipes (ISO
                                        11299-3:2011)
1115 108 11357 FprEN ISO 11357-3        Plastics - Differential scanning calorimetry (DSC) - Part 3:    5020 MECMA
                                        Determination of temperature and enthalpy of melting and
                                        crystallization
1116 108 11357 FprEN ISO 11357-4        Plastics - Differential scanning calorimetry (DSC) - Part 4:    5020 MECMA
                                        Determination of specific heat capacity (ISO 11357-4:2005)

1117 108 11357 FprEN ISO 11357-6        Plastics - Differential scanning calorimetry (DSC) - Part 6:    5020 MECMA
                                        Determination of oxidation induction time (isothermal OIT)
                                        and oxidation induction temperature (dynamic OIT) (ISO
                                        11357-6:2008)
1118 108 11357 FprEN ISO 11357-7        Plastics - Differential scanning calorimetry (DSC) - Part 7:    5020 MECMA
                                        Determination of crystallization kinetics (ISO 11357-7:2002)

1119 108 11403 EN ISO 11403-2:2012      Plastics - Acquisition and presentation of comparable           5020 MECMA
                                        multipoint data - Part 2: Thermal and processing properties
                                        (ISO 11403-2:2012)
1120 108 11833 EN ISO 11833-1:2012     Plastics - Unplasticized poly(vinyl chloride) sheets - Types,      5020 MECMA
                                       dimensions and characteristics - Part 1: Sheets of thickness
                                       not less than 1 mm (ISO 11833-1:2012)
1121 108 11963 FprEN ISO 11963         Plastics - Polycarbonate sheets - Types, dimensions and            5020 MECMA
                                       characteristics (ISO/FDIS 11963:2012)
1122 108 11963 FprEN ISO 11963         Plastics - Polycarbonate sheets - Types, dimensions and            4020 MECMA
                                       characteristics (ISO/FDIS 11963:2012)
1123 108 12201 EN 12201-2:2011/FprA1   Plastics piping systems for water supply, and for drainage         5020 MECMA
                                       and sewerage under pressure - Polyethylene (PE) - Part 2:
                                       Pipes
1124 108 12201 EN 12201-3:2011/FprA1   Plastics piping systems for water supply, and for drainage         5020 MECMA
                                       and sewerage under pressure - Polyethylene (PE) - Part 3:
                                       Fittings
1125 108 12666 CEN/TS 12666-2:2012     Plastics piping systems for non-pressure underground               5020 MECMA
                                       drainage and sewerage - Polyethylene (PE) - Part 2:
                                       Guidance for the assessment of conformity
1126 108 12814 prEN 12814-3            Testing of welded joints in thermoplastics semi-finished           4020 MECMA
                                       products - Part 3: Tensile creep test
1127 108 13067 EN 13067:2012           Plastics welding personnel - Qualification testing of welders -    5020 MECMA
                                       Thermoplastics welded assemblies
1128 108 13100 EN 13100-4:2012         Non destructive testing of welded joints of thermoplastics         5020 MECMA
                                       semifinished products - Part 4: High voltage testing

1129 108 13476 FprCEN/TS 13476-4       Plastics piping systems for non-pressure underground               5020 MECMA
                                       drainage and sewerage - Structured-wall piping systems of
                                       unplasticized poly(vinyl chloride) (PVC-U), polypropylene
                                       (PP) and polyethylene (PE) - Part 4: Guidance for the
                                       assessment of conformity
1130 108 13482 prEN 13482 rev          Rubber hoses and hose assemblies for asphalt and bitumen - 4020 MECMA
                                       Specification
1131 108 13483 prEN 13483 rev          Rubber and plastic hoses and hose assemblies with internal 4020 MECMA
                                       vapour recovery for measured fuel dispensing systems -
                                       Specification
1132 108 13598 CEN/TS 13598-3:2012     Plastics piping systems for non-pressure underground         5020 MECMA
                                       drainage and sewerage - Unplasticized poly(vinyl
                                       chloride)(PVC-U), polypropylene (PP) and polyethylene (PE) -
                                       Part 3: Guidance for assessment of conformity
1133 108 14364 FprEN 14364:2012        Plastics piping systems for drainage and sewerage with or          5020 MECMA
                                       without pressure - Glass-reinforced thermosetting plastics
                                       (GRP) based on unsaturated polyester resin (UP) -
                                       Specifications for pipes, fittings and joints

1134 108 14541 FprCEN/TS 14541         Plastics pipes and fittings - Characteristics for utilisation of   5020 MECMA
                                       non-virgin PVC-U, PP and PE materials - Complementary
                                       element
1135 108 14855 FprEN ISO 14855-1       Determination of the ultimate aerobic biodegradability of          5020 MECMA
                                       plastic materials under controlled composting conditions -
                                       Method by analysis of evolved carbon dioxide - Part 1:
                                       General method (ISO/FDIS 14855-1:2012)
1136 108 14910 FprEN ISO 14910-1       Plastics - Thermoplastic polyester/ester and polyether/ester       5020 MECMA
                                       elastomers for moulding and extrusion - Part 1: Designation
                                       system and basis for specification (ISO/FDIS 14910-1:2012)

1137 108 14910 FprEN ISO 14910-2       Plastics - Thermoplastic polyester/ester and polyether/ester       5020 MECMA
                                       elastomers for moulding and extrusion - Part 2: Preparation
                                       of test specimens and determination of properties (ISO/FDIS
                                       14910-2:2012)
1138 108 15383 FprEN 15383             Plastics piping systems for drainage and sewerage - Glass-         5020 MECMA
                                       reinforced thermosetting plastics (GRP) based on polyester
                                       resin (UP) - Manholes and inspection chambers

1139 108 15791 prEN ISO 15791-1        Plastics - Development and use of intermediate-scale fire          4020 MECMA
                                       tests for plastics products - Part 1: General guidance
                                       (ISO/DIS 15791-1:2012)
1140 108 15874 FprEN ISO 15874-1      Plastics piping systems for hot and cold water installations -   5020 MECMA
                                      Polypropylene (PP) - Part 1: General (ISO/FDIS 15874-
                                      1:2012)
1141 108 16010 FprCEN/TS 16010        Plastics - Recycled plastics - Sampling procedures for testing 5020 MECMA
                                      plastics waste and recyclates
1142 108 16011 FprCEN/TS 16011        Plastics - Recycled plastics - Sample preparation              5020 MECMA
1143 108 16296 EN 16296:2012          Imperfections in thermoplastics welded joints - Quality levels 5020 MECMA

1144 108 16396 prEN ISO 16396-1 rev   Plastics - Polyamide (PA) moulding and extrusion materials -     4020 MECMA
                                      Part 1: Designation system, marking of products and basis
                                      for specification (ISO/DIS 16396-1:2012)

1145 108 16398 CEN/TS 16398:2012      Plastics - Template for reporting and communication of bio-      5020 MECMA
                                      based carbon content and recovery options of biopolymers
                                      and bioplastics - Data sheet
1146 108 16465 prEN 16465             Plastics - Calibration method of black-standard and white-       4020 MECMA
                                      standard thermometers and black-panel and white-panel
                                      thermometers for use in natural and artificial weathering

1147 108 17556 EN ISO 17556:2012      Plastics - Determination of the ultimate aerobic                 5020 MECMA
                                      biodegradability of plastic materials in soil by measuring the
                                      oxygen demand in a respirometer or the amount of carbon
                                      dioxide evolved (ISO 17556:2012)
1148 108 17855 prEN ISO 17855-1 rev   Plastics - Polyethylene (PE) moulding and extrusion              4020 MECMA
                                      materials - Part 1:Designation system and basis for
                                      specifications (ISO/DIS 17855-1:2012)
1149 108 19712 FprEN ISO 19712-1      Plastics - Decorative solid surfacing materials - Part 1:        5020 MECMA
                                      Classification and specifications (ISO 19712-1:2008)
1150 108 19712 FprEN ISO 19712-2      Plastics - Decorative solid surfacing materials - Part 2:        5020 MECMA
                                      Determination of properties - Sheet goods (ISO 19712-
                                      2:2007)
1151 108 19712 FprEN ISO 19712-3      Plastics - Decorative solid surfacing materials - Part 3:        5020 MECMA
                                      Determination of properties - Solid surface shapes (ISO
                                      19712-3:2007)
1152 108 27165 prCEN ISO/TR 27165     Thermoplastics piping systems - Guidance for definitions of      5020 MECMA
                                      wall constructions for pipes (ISO/DTR 27165:2012)

1153 109    834 FprEN 834             Heat cost allocators for the determination of the consumption    5020 MECMA
                                      of room heating radiators - Appliances with electrical energy
                                      supply
1154 109   4064 prEN ISO 4064-1 rev   Water meters for cold potable water and hot water - Part 1:      4020 MECMA
                                      Metrological and technical requirements (ISO/DIS 4064-
                                      1:2012)
1155 109   4064 prEN ISO 4064-2 rev   Water meters for cold potable water and hot water - Part 2:      4020 MECMA
                                      Test methods (ISO/DIS 4064-2:2012)
1156 109   4064 prEN ISO 4064-3       Water meters intended for the metering of cold potable water     4020 MECMA
                                      and hot water - Part 3: Test report format (ISO/DIS 4064-
                                      3:2012)
1157 109   4064 prEN ISO 4064-4       Water meters intended for the metering of cold potable water     4020 MECMA
                                      and hot water - Part 4: Non-metrological requirements not
                                      covered in ISO 4064-1 (ISO/DIS 4064-4:2012)

1158 109   4064 prEN ISO 4064-5       Water meters intended for the metering of cold potable water     4020 MECMA
                                      and hot water - Part 5: Installation requirements (ISO/DIS
                                      4064-5:2012)
1159 109 12405 EN 12405-2:2012        Gas meters - Conversion devices - Part 2: Energy                 5020 MECMA
                                      conversion
1160 109 13757 prEN 13757-4 rev       Communication systems for meters and remote reading of           4020 MECMA
                                      meters - Part 4: Wireless meter readout (Radio meter
                                      reading for operation in SRD bands)
1161 109 16314 FprEN 16314            Gas meters - Additional functionalities                          4020 MECMA
1162 109 16469 FprCEN/TR 16469        Hydrometry - Measurement of the rainfall intensity (liquid       5020 MECMA
                                      precipitation): requirements, calibration methods and field
                                      measurements
1163 109 18365 prEN ISO 18365                  Hydrometry - Guidelines for selection, establishment and          4020 MECMA
                                               operation of a gauging station (ISO/DIS 18365)
1164 109 45501 FprEN 45501                     Metrological aspects of non-automatic weighing instruments        5020 MECMA

1165 117 16371 CEN/TS 16371:2012               Guidelines for implementors of EN 15744 and EN 15907              5020 MECMA
1166 118    73 prEN 73 rev                     Wood preservatives - Accelerated ageing of treated wook           4020 MECMA
                                               prior to biological testing - Evaporative ageing procedure

1167 118    117 EN 117:2012                    Wood preservatives - Determination of toxic values against        5020 MECMA
                                               Reticulitermes species (European termites) (Laboratory
                                               method)
1168 118    120 prEN 120 rev                   Wood-based panels - Determination of formaldehyde release 4020 MECMA
                                               - Extraction method (called the perforator method)

1169 118    252 prEN 252 rev                   Field test method for determining the relative protective         4020 MECMA
                                               effectiveness of a wood preservative in ground contact

1170 118    325 EN 325:2012                    Wood-based panels - Determination of dimensions of test           5020 MECMA
                                               pieces
1171 118    330 prEN 330 rev                   Wood preservatives - Determination of the relative protective     4020 MECMA
                                               effectiveness of a wood preservative for use under a coating
                                               and exposed out-of-ground contact - Field test: L-joint
                                               method
1172 118    636 EN 636:2012                    Plywood - Specifications                                          5020 MECMA
1173 118    691 EN 691-1:2012                  Safety of woodworking machines - Part 1: Common                   5020 MECMA
                                               requirements
1174 118    716 EN 716-1:2008/FprA1:2012       Furniture - Children's cots and folding cots for domestic use -   5020 MECMA
                                               Part 1: Safety requirements
1175 118    716 EN 716-2:2008/FprA1:2012       Furniture - Children's cots and folding cots for domestic use -   5020 MECMA
                                               Part 2: Test methods
1176 118    717 prEN 717-2 rev                 Wood-based panels - Determination of formaldehyde release         4020 MECMA
                                               - Part 2: Gas analysis method
1177 118    747 EN 747-1:2012                  Furniture - Bunk beds and high beds - Part 1: Safety,             5020 MECMA
                                               strength and durability requirements
1178 118    747 EN 747-2:2012                  Furniture - Bunk beds and high beds - Part 2: Test methods        5020 MECMA

1179 118    847 prEN 847-1 rev              Tools for woodworking - Safety requirements - Part 1: Milling        4020 MECMA
                                            tools, circular saw blades
1180 118    847 prEN 847-2 rev              Tools for woodworking - Safety requirements - Part 2:                4020 MECMA
                                            Requirements for the shank of shank mounted milling
1181 118    847 prEN 847-3 rev              Tools for woodworking - Safety requirements - Part 3:                4020 MECMA
                                            Clamping devices
1182 118    848 EN 848-1:2007+A1:2009/FprA2 Safety of woodworking machines - One side moulding                   5020 MECMA
                                            machines with rotating tool - Part 1: Single spindle vertical
                                            moulding machines
1183 118    848 EN 848-2:2007+A1:2009/FprA2 Safety of woodworking machines - One side moulding                   5020 MECMA
                                            machines with rotating tool - Part 2: Single spindle hand
                                            fed/integrated fed routing machines
1184 118    848 EN 848-3:2012                  Safety of woodworking machines - One side moulding                5020 MECMA
                                               machines with rotating tool - Part 3: Numerically controlled
                                               (NC) boring and routing machines
1185 118    859 EN 859:2007+A1:2009/FprA2      Safety of woodworking machines - Hand fed surface planing         5020 MECMA
                                               machines
1186 118    860 EN 860:2007+A1:2009/FprA2      Safety of woodworking machines - One side thickness               5020 MECMA
                                               planing machines
1187 118    861 EN 861:2007+A1:2009/FprA2      Safety of woodworking machines - Surface planing and              5020 MECMA
                                               thicknessing machines
1188 118   1316 EN 1316-1:2012                 Hardwood round timber - Qualitative classification - Part 1:      5020 MECMA
                                               Oak and beech
1189 118   1316 EN 1316-2:2012                 Hardwood round timber - Qualitative classification - Part 2:      5020 MECMA
                                               Poplar
1190 118   1728 EN 1728:2012                   Furniture - Seating - Test methods for the determination of       5020 MECMA
                                               strength and durability
1191 118   1730 EN 1730:2012           Furniture - Tables - Test methods for the determination of         5020 MECMA
                                       stability, strength and durability
1192 118   1807 FprEN 1807-1           Safety of woodworking machines - Band sawing machines -            5020 MECMA
                                       Part 1: Table band saws and band re-saws
1193 118   1807 FprEN 1807-2           Safety of woodworking machines - Band sawing machines -            5020 MECMA
                                       Part 2: Log sawing machines
1194 118   1870 EN 1870-15:2012        Safety of woodworking machines - Circular sawing machines -        5020 MECMA
                                       Part 15: Multi-blade cross-cut sawing machines with
                                       integrated feed of the workpiece and manual loading and/or
                                       unloading
1195 118   1870 EN 1870-16:2012        Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                                       Part 16: Double mitre sawing machines for V cutting

1196 118   1870 EN 1870-17:2012        Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                                       Part 17: Manual horizontal cutting cross-cut sawing
                                       machines with one saw unit (radial arm saws)
1197 118   1870 EN 1870-               Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                5:2002+A1:2009/FprA2   Part 5: Circular sawbenches/up-cutting cross-cut sawing
                                       machines
1198 118   1870 EN 1870-7:2012         Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                                       Part 7: Single blade log sawing machines with integrated
                                       feed table and manual loading and/or unloading

1199 118   1870 EN 1870-9:2012         Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                                       Part 9: Double blade circular sawing machines for cross-
                                       cutting with integrated feed and with manual loading and/or
                                       unloading
1200 118   1870 FprEN 1870-8           Safety of woodworking machines - Circular sawing machines - 5020 MECMA
                                       Part 8: Single blade edging circular rip sawing machines with
                                       power driven saw unit and manual loading and/or unloading

1201 118   1870 prEN 1870-11 rev       Safety of woodworking machines - Circular sawing machines - 4020 MECMA
                                       Part 11: Semi-automatic and automatic horizontal cross-cut
                                       sawing machines with one saw unit (radial arm saws)

1202 118   1870 prEN 1870-19           Safety of woodworking machines - Circular sawing machines - 4020 MECMA
                                       Part 19: Circular saw benches (with and without sliding table)
                                       and building site saws
1203 118   1910 FprEN 1910             Wood flooring and wood panelling and cladding -                    4020 MECMA
                                       Determination of dimensional stability
1204 118   1957 EN 1957:2012           Furniture - Beds and mattresses - Test methods for the             5020 MECMA
                                       determination of functional characteristics and assessment
                                       criteria
1205 118 12750 FprEN 12750             Safety of woodworking machines - Four sided moulding               5020 MECMA
                                       machines
1206 118 12871 prEN 12871 rev          Wood-based panels - Determination of performance                   4020 MECMA
                                       characteristics for load bearing panels for use in floors, roofs
                                       and walls
1207 118 13629 EN 13629:2012           Wood flooring - Solid individual and pre-assembled                 5020 MECMA
                                       hardwood boards
1208 118 13759 EN 13759:2012           Furniture - Operating mechanisms for seating and sofa-beds -       5020 MECMA
                                       Test methods
1209 118 14076 prEN 14076 rev          Timber stairs - Terminology                                        4020 MECMA
1210 118 14342 FprEN 14342 rev         Wood flooring - Characteristics, evaluation of conformity and      4020 MECMA
                                       marking
1211 118 14988 EN 14988-1:2006/FprA1   Children's high chairs - Part 1: Safety requirements               5020 MECMA
1212 118 14988 EN 14988-2:2006/FprA1   Children's high chairs - Part 2: Test methods                      5020 MECMA
1213 118 15003 CEN/TR 15003:2012       Durability of wood and wood-based products - Criteria for hot      5020 MECMA
                                       air processes for curative uses against wood destroying
                                       organisms
1214 118 15119 CEN/TS 15119-2:2012        Durability of wood and wood-based products - Determination       5020 MECMA
                                          of emissions from preservative treated wood to the
                                          environment - Part 2: Wooden commodities exposed in Use
                                          Class 4 or 5 (in contact with the ground, fresh water or sea
                                          water) - Laboratory method


1215 118 15186 EN 15186:2012              Furniture - Assessment of the surface resistance to              5020 MECMA
                                          scratching
1216 118 15912 CEN/TS 15912:2012          Durability of reaction to fire performance - Classes of fire-    5020 MECMA
                                          retardant treated wood-based product in interior and exterior
                                          end use applications
1217 118 16121 prEN 16121                 Non-domestic storage furniture - Requirements for safety,        4020 MECMA
                                          strength, durability and stability
1218 118 16122 EN 16122:2012              Domestic and non-domestic storage furniture - Test methods       5020 MECMA
                                          for the determination of strength, durability and stability

1219 118 16337 prEN 16337                 Hardware for Furniture - Strength and loading capacity of        4020 MECMA
                                          shelf supports
1220 118 16368 prEN 16368                 Lightweight Particleboards - Specifications                      4020 MECMA
1221 118 16420 CEN/TR 16420:2012          Analytical Method for the Analysis of Propiconazole in           5020 MECMA
                                          treated Wood Samples
1222 118 16449 prEN 16449                 Wood and wood-based products - Calculation of                    4020 MECMA
                                          sequestration of atmospheric carbon dioxide
1223 119      6556 FprEN ISO 6556         Laboratory glassware - Filter flasks (ISO/FDIS 6556:2012)        5020 MECMA

1224 119      6556 FprEN ISO 6556         Laboratory glassware - Filter flasks (ISO/FDIS 6556:2012)        4020 MECMA

1225 119 14175 EN 14175-7:2012            Fume cupboards - Part 7: Fume cupboards for high heat and        5020 MECMA
                                          acidic load
1226 125        71 EN 71-1:2011/prA2      Safety of toys - Part 1: Mechanical and physical properties -    4020 MECMA
                                          Amendment 2: Acoustics
1227 125        71 prEN 71-12             Safety of toys - Part 12: N-nitrosamines and N-nitrosatable      4020 MECMA
                                          substances
1228 125        71 prEN 71-13             Safety of toys - Part 13: Olfactory board games, gustative       4020 MECMA
                                          board games, cosmetic kits and gustative kits
1229 125        71 prEN 71-3 rev          Safety of toys - Part 3: Migration of certain elements           4020 MECMA
1230 125        71 prEN 71-5              Safety of toys - Part 5: Chemical toys (sets) other than         4020 MECMA
                                          experimental sets
1231 125      1466 prEN 1466              Child use and care articles - Carry cots and stands - Safety     4020 MECMA
                                          requirements and test methods
1232 125 15371 FprCEN/TR 15371            Safety of toys - Replies to requests for interpretation of EN    5020 MECMA
                                          71-1, EN 71-2, and EN 71-8
1233 125 16120 EN 16120:2012              Child use and care articles - Chair mounted seat                 5020 MECMA
1234 125 16232 prEN 16232                 Child use and care articles - Infant swings                      4020 MECMA
1235 125 16411 CEN/TR 16411:2012          Child use and care articles - 2012 compiled interpretations of   5020 MECMA
                                          CEN/TC 252 standards
1236 128 60255 FprEN 60255-26:2011        Measuring relays and protection equipment -- Part 26:            5020 MECMA
                                          Electromagnetic compatibility requirements
1237 128 60255 FprEN 60255-27:2012        Measuring relays and protection equipment -- Part 27:            5020 MECMA
                                          Product safety requirements
1238 128 62246 FprEN 62246-1-1:2011       Reed switches -- Part 1-1: Quality assessment specification      5020 MECMA

1239 129 60974 EN 60974-1:2012            Arc welding equipment -- Part 1: Welding power sources           5020 MECMA

1240 129 60974 FprEN 60974-10:2012        Arc welding equipment -- Part 10: Electromagnetic                5020 MECMA
                                          compatibility (EMC) requirements
1241   129   60974   FprEN 60974-2:2012   Arc welding equipment -- Part 2: Liquid cooling systems          5020   MECMA
1242   129   60974   FprEN 60974-2:2012   Arc welding equipment -- Part 2: Liquid cooling systems          5020   MECMA
1243   129   60974   FprEN 60974-5:2011   Arc welding equipment -- Part 5: Wire feeders                    5020   MECMA
1244   129   60974   FprEN 60974-7:2012   Arc welding equipment -- Part 7:Torches                          5020   MECMA
1245   130   60730   FprEN 60730-1:2011   Automatic electrical controls for household and similar use --   5020   MECMA
                                          Part 1: General requirements
1246 130 60730 FprEN 60730-2-5:2011             Automatic electrical controls for household and similar use --   5020 MECMA
                                                Part 2-5: Particular requirements for automatic electrical
                                                burner control systems
1247 131 60061 EN 60061-1:1993/FprA48:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 1: Lamp caps

1248 131 60061 EN 60061-1:1993/FprA48:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 1: Lamp caps

1249 131 60061 EN 60061-1:1993/FprA49:2011 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 1: Lamp caps

1250 131 60061 EN 60061-2:1993/FprA45:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 2: Lampholders

1251 131 60061 EN 60061-2:1993/FprA45:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 2: Lampholders

1252 131 60061 EN 60061-2:1993/FprA46:2011 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 2: Lampholders

1253 131 60061 EN 60061-3:1993/FprA46:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 3: Gauges

1254 131 60061 EN 60061-3:1993/FprA46:2012 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 3: Gauges

1255 131 60061 EN 60061-3:1993/FprA47:2011 Lamp caps and holders together with gauges for the control            5020 MECMA
                                           of interchangeability and safety -- Part 3: Gauges

1256 131 60432 EN 60432-2:2000/A2:2012          Incandescent lamps - Safety specifications -- Part 2:            5020 MECMA
                                                Tungsten halogen lamps for domestic and similar general
                                                lighting purposes
1257 131 60598 FprEN 60598-1:2012               Luminaires -- Part 1: General requirements and tests             5020 MECMA
1258 131 60598 FprEN 60598-2-11:2011            Luminaires -- Part 2-11: Particular requirements - Aquarium      5020 MECMA
                                                luminaires
1259 131 60598 FprEN 60598-2-12:2012            Luminaires -- Part 2-12: Particular requirements - Mains         5020 MECMA
                                                socket-outlet mounted nightlights
1260 131 60598 FprEN 60598-2-22:2012            Luminaires -- Part 2-22: Particular requirements - Luminaires    5020 MECMA
                                                for emergency lighting
1261 131 60598 FprEN 60598-2-8:2012             Luminaires -- Part 2-8: Particular requirements - Handlamps      5020 MECMA

1262 131 60838 EN 60838-2-2:2006/A1:2012        Miscellaneous lampholders -- Part 2-2: Particular                5020 MECMA
                                                requirements - Connectors for LED-modules
1263 131 60968 EN 60968:1990/FprA3:2011         Self-ballasted lamps for general lighting services - Safety      5020 MECMA
                                                requirements
1264 131 61195 EN 61195:1999/FprA1:2012         Double-capped fluorescent lamps - Safety specifications          5020 MECMA

1265 131 61199 EN 61199:2011/FprA1:2011         Single-capped fluorescent lamps - Safety specifications          5020 MECMA

1266 131 61231 EN 61231:2010/FprA1:2012         International lamp coding system (ILCOS)                         5020 MECMA
1267 131 61347 EN 61347-1:2008/FprA2:2012       Lamp controlgear -- Part 1: General and safety requirements      5020 MECMA

1268 131 61347 EN 61347-1:2008/FprA2:2012       Lamp controlgear -- Part 1: General and safety requirements      5020 MECMA

1269 131 61347 EN 61347-2-1:2001/FprA2:2011 Lamp controlgear -- Part 2-1: Particular requirements for            5020 MECMA
                                            starting devices (other than glow starters)
1270 131 61347 FprEN 61347-2-13:2012        Lamp controlgear -- Part 2-13: Particular requirements for           5020 MECMA
                                            d.c. or a.c. supplied electronic controlgear for LED modules

1271 131 61347 FprEN 61347-2-9:2012             Lamp controlgear -- Part 2-9: Particular requirements for        5020 MECMA
                                                electromagnetic controlgear for discharge lamps (excluding
                                                fluorescent lamps)
1272 131 62031 EN 62031:2008/FprA1:2012         LED modules for general lighting - Safety specifications         5020 MECMA
1273 131 62034 EN 62034:2012              Automatic test systems for battery powered emergency       5020 MECMA
                                          escape lighting
1274 131 62442 FprEN 62442-3:2012         Energy performance of lamp controlgear -- Part 3:          5020 MECMA
                                          Controlgear for halogen lamps and LED modules - Method of
                                          measurement to determine the efficiency of the controlgear

1275 131 62560 FprEN 62560:2012           Self-ballasted LED-lamps for general lighting services by           5020 MECMA
                                          voltage > 50 V - Safety specifications
1276 131 62612 FprEN 62612:2011           Self-ballasted LED lamps for general lighting services with         5020 MECMA
                                          supply voltages > 50 V - Performance requirements

1277 131 62639 EN 62639:2012              Fluorescent induction lamps - Performance specification             5020 MECMA

1278 131 62663 FprEN 62663-1:2012         Non-ballasted LED-lamps -- Part 1: Safety specifications            5020 MECMA

1279 133 61362 EN 61362:2012              Guide to specification of hydraulic turbine governing systems       5020 MECMA

1280 133 62097 EN 62097:2009/FprA1:2011   Hydraulic machines, radial and axial - Performance                  5020 MECMA
                                          conversion method from model to prototype
1281 135 60286 FprEN 60286-4:2012         Packaging of components for automatic handling -- Part 4:           5020 MECMA
                                          Stick magazines for electronic components encapsulated in
                                          packages of different forms
1282 135 60393 FprEN 60393-2:2012         Potentiometers for use in electronic equipment -- Part 2:           5020 MECMA
                                          Sectional specification: lead-screw actuated and rotary
                                          preset potentiometers
1283 135 60393 FprEN 60393-5:2012         Potentiometers for use in electronic equipment -- Part 5:           5020 MECMA
                                          Sectional specification: single-turn rotary low-power
                                          wirewound and nonwirewound potentiometers
1284 135 60393 FprEN 60393-6:2012         Potentiometers for use in electronic equipment -- Part 6:           5020 MECMA
                                          Sectional specification: Surface mount preset potentiometers

1285 135 1E+05 EN 140401-                 Detail specification: Fixed low power film SMD resistors -          5020 MECMA
               803:2007/FprAB:2012        Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2
1286 140 61850 FprEN 61850-10:2012        Communication networks and systems for power utility                5020 MECMA
                                          automation -- Part 10: Conformance testing
1287 140 61850 FprEN 61850-10:2012        Communication networks and systems for power utility                5020 MECMA
                                          automation -- Part 10: Conformance testing
1288 140 61850 FprEN 61850-3:2012         Communication networks and systems for power utility                5020 MECMA
                                          automation -- Part 3: General requirements
1289 140 61850 FprEN 61850-5:2012         Communication networks and systems for power utility                5020 MECMA
                                          automation -- Part 5: Communication requirements for
                                          functions and device models
1290 140 61850 FprEN 61850-7-410:2012     Communication networks and systems for power utility                5020 MECMA
                                          automation -- Part 7-410: Basic communication structure -
                                          Hydroelectric power plants - Communication for monitoring
                                          and control
1291 140 61968 FprEN 61968-1:2012         Application integration at electric utilities - System interfaces   5020 MECMA
                                          for distribution management -- Part 1: Interface architecture
                                          and general requirements
1292 140 61968 FprEN 61968-100:2012       Application integration at electric utilities - System interfaces   5020 MECMA
                                          for distribution management -- Part 100: Implementation
                                          profiles
1293 140 61968 FprEN 61968-11:201X        Application integration at electric utilities - System interfaces   5020 MECMA
                                          for distribution management -- Part 11: Common information
                                          model (CIM) extensions for distribution

1294 140 61968 FprEN 61968-9:2012         Application integration at electric utilities - System interfaces   5020 MECMA
                                          for distribution management -- Part 9: Interfaces for meter
                                          reading and control
1295 140 61970 FprEN 61970-301:2011       Energy management system application program interface              5020 MECMA
                                          (EMS-API) -- Part 301: Common information model (CIM)
                                          base
1296 140 61970 FprEN 61970-552:2012         Energy Management System Application Program Interface             5020 MECMA
                                            (EMS-API) -- Part 552: CIM XML Model Exchange Format

1297 140 62325 FprEN 62325-301:2012         Framework for energy market communications -- Part 301:            5020 MECMA
                                            Common Information Model (CIM) extensions for markets

1298 140 62325 FprEN 62325-450:2011         Framework for energy market communications -- Part 450:            5020 MECMA
                                            Profile and context modelling rules
1299 140 62361 FprEN 62361-100:2011         Harmonization of quality codes across TC 57 -- Part 100:           5020 MECMA
                                            Naming and design rules for CIM profiles to XML schema
                                            mapping
1300 140 62488 FprEN 62488-1:2012           Power line communication systems for power utility                 5020 MECMA
                                            applications -- Part 1: Planning of analogue and digital power
                                            line carrier systems operating over EHV/HV/MV electricity
                                            grids
1301 144 61124 EN 61124:2012                Reliability testing - Compliance tests for constant failure rate   5020 MECMA
                                            and constant failure intensity
1302 144 62551 FprEN 62551:2012             Analysis techniques for dependability - Petri net techniques       5020 MECMA

1303 144 62673 FprEN 62673:2012             Methodology for communication network dependability                5020 MECMA
                                            assessment and assurance
1304 145 60352 EN 60352-2:2006/FprA1:2012   Solderless connections -- Part 2: Crimped connections -            5020 MECMA
                                            General requirements, test methods and practical guidance

1305 145 60352 EN 60352-5:2012              Solderless connections -- Part 5: Press-in connections -           5020 MECMA
                                            General requirements, test methods and practical guidance

1306 145 60512 EN 60512-1-100:2012          Connectors for electronic equipment - Tests and                    5020 MECMA
                                            measurements -- Part 1-100: General - Applicable
                                            publications
1307 145 60512 EN 60512-16-21:2012          Connectors for electronic equipment - Tests and                    5020 MECMA
                                            measurements -- Part 16-21: Mechanical tests on contacts
                                            and terminations - Test 16u: Whisker test via the application
                                            of external mechanical stresses
1308 145 60512 EN 60512-99-001:201X         Connectors for electronic equipment - Tests and                    5020 MECMA
                                            measurements -- Part 99-001: Test schedule for engaging
                                            and separating connectors under electrical load - Test 99a:
                                            Connectors used in twisted pair communication cabling with
                                            remote power
1309 145 60512 FprEN 60512-28-100:201X      Connectors for electronic equipment - Tests and             5020 MECMA
                                            measurements -- Part 28-100: Signal integrity tests up to 1
                                            000 mhz on IEC 60603-7 and IEC 61076-3 series connectors
                                            - Tests 28a to 28g
1310 145 60917 EN 60917-2-5:2012            Modular order for the development of mechanical structures         5020 MECMA
                                            for electronic equipment practices -- Part 2-5: Sectional
                                            specification - Interface co-ordination dimensions for the 25
                                            mm equipment practice - Cabinet interface dimensions for
                                            miscellaneous equipment
1311 145 61076 EN 61076-2-101:2012          Connectors for electronic equipment - Product requirements -- 5020 MECMA
                                            Part 2-101: Circular connectors - Detail specification for M12
                                            connectors with screw-locking
1312 145 61076 EN 61076-3-110:2012          Connectors for electronic equipment - Product requirements -- 5020 MECMA
                                            Part 3-110: Detail specification for shielded, free and fixed
                                            connectors for data transmission with frequencies up to 1
                                            000 MHz
1313 145 61076 EN 61076-4-116:2012          Connectors for electronic equipment - Product requirements -- 5020 MECMA
                                            Part 4-116: Printed board connectors - Detail specification for
                                            a high-speed two-part connector with integrated shielding
                                            function
1314 145 61169 EN 61169-47:201X             Radio-frequency connectors -- Part 47: Sectional               5020 MECMA
                                            specification - Radio-frequency coaxial connectors with
                                            clamp coupling, typically for use in 75 O cable networks (type
                                            F-Quick)
1315 145 61169 FprEN 61169-1:2012                 Radio-frequency connectors -- Part 1: Generic specification -   5020 MECMA
                                                  General requirements and measuring methods

1316 145 61169 FprEN 61169-26:2011                Radio-frequency connectors -- Part 26: Sectional                5020 MECMA
                                                  specification of TNCA series RF coaxial connector
1317 145 61169 FprEN 61169-43:201X                Radio-frequency connectors -- Part 43: Sectional                5020 MECMA
                                                  specification for RBMA Series Blind mating RF coaxial
                                                  connectors
1318 145 61587 EN 61587-4:2012                    Mechanical structures for electronic equipment - Tests for      5020 MECMA
                                                  IEC 60917 and IEC 60297 series -- Part 4: Combination of
                                                  performance levels for modular cabinets

1319 145 61587 EN 61587-4:2012                    Mechanical structures for electronic equipment - Tests for      5020 MECMA
                                                  IEC 60917 and IEC 60297 series -- Part 4: Combination of
                                                  performance levels for modular cabinets

1320 145 61587 FprEN 61587-3:2012                 Mechanical structures for electronic equipment - Tests for      5020 MECMA
                                                  IEC 60917 and IEC 60297 -- Part 3: Electromagnetic
                                                  shielding performance tests for cabinets and subracks
1321 147       378 EN 378-2:2008+A1:2009/FprA2 Refrigerating systems and heat pumps - Safety and                  5020 MECMA
                                               environmental requirements - Part 2: Design, construction,
                                               testing, marking and documentation
1322 147 12900 prEN 12900                         Refrigerant compressors - Rating conditions, tolerances and     4020 MECMA
                                                  presentation of manufacturer's performance data

1323 147 16440 prEN 16440-1                       Testing methodologies of cooling equipment for insulated        4020 MECMA
                                                  means of transportation - Part 1: Mechanical refrigeration
                                                  systems with forced air circulation evaporator or convection
                                                  and optional heating devices
1324 147 16491 FprCEN ISO/TR 16491                Guidelines for the evaluation of uncertainty of measurement     5020 MECMA
                                                  in air conditioner and heat pump cooling and heating
                                                  capacity tests (ISO/DTR 16491:2012)
1325 147 23953 EN ISO 23953-1:2005/A1:2012 Refrigerated display cabinets - Part 1: Vocabulary -       5020 MECMA
                                           Amendment 1 (ISO 23953-1:2005/Amd 1:2012)
1326 147 23953 EN ISO 23953-2:2005/A1:2012 Refrigerated display cabinets - Part 2: Classification,    5020 MECMA
                                           requirements and test conditions - Amendment 1 (ISO 23953-
                                           2:2005/Amd 1:2012)
1327 152       764 CEN/TR 764-6:2012              Pressure equipment - Part 6: Structure and content of           5020 MECMA
                                                  operating instructions
1328   152   13445   EN 13445-2:2009/A1:2012      Unfired pressure vessels - Part 2: Materials                    5020   MECMA
1329   152   13445   EN 13445-2:2009/A2:2012      Unfired pressure vessels - Part 2: Materials                    5020   MECMA
1330   152   13445   EN 13445-3:2009/A1:2012      Unfired pressure vessels - Part 3: Design                       5020   MECMA
1331   152   13445   EN 13445-3:2009/prA2         Unfired pressure vessels - Part 3: Design                       4020   MECMA
1332   152   13445   EN 13445-3:2009/prA5         Unfired pressure vessels - Part 3: Design                       4020   MECMA
1333   152   13445   EN 13445-4:2009/prA2         Unfired pressure vessels - Part 4: Fabrication                  4020   MECMA
1334   152   13445   prEN 13445-5                 Unfired pressure vessels - Part 5: Inspection and testing       4020   MECMA

1335 154      1034 EN 1034-17:2012                Safety of machinery - Safety requirements for the design and    5020 MECMA
                                                  construction of paper making and finishing machines - Part
                                                  17: Tissue making machines
1336 154      1034 EN 1034-21:2012                Safety of machinery - Safety requirements for the design and    5020 MECMA
                                                  construction of paper making and finishing machines - Part
                                                  21: Coating machines
1337 154      1034 EN 1034-26:2012                Safety of machinery - Safety requirements for the design and    5020 MECMA
                                                  construction of paper making and finishing machines - Part
                                                  26: Roll packaging machines
1338 154      1034 EN 1034-27:2012                Safety of machinery - Safety requirements for the design and    5020 MECMA
                                                  construction of paper making and finishing machines - Part
                                                  27: Roll handling systems
1339 154 12309 prEN 12309-1                       Gas-fired sorption appliances for heating and/or cooling with   4020 MECMA
                                                  a net heat input not exceeding 70 kW - Part 1: Terms and
                                                  definitions
1340 154 12309 prEN 12309-3           Gas-fired sorption appliances for heating and/or cooling with     4020 MECMA
                                      a net heat input not exceeding 70 kW - Part 3: Test
                                      conditions
1341 154 12309 prEN 12309-4           Gas-fired sorption appliances for heating and/or cooling with     4020 MECMA
                                      a net heat input not exceeding 70 kW - Part 4: Test methods

1342 154 12309 prEN 12309-5           Gas-fired sorption appliances for heating and/or cooling with     4020 MECMA
                                      a net heat input not exceeding 70 kW- Part 5: Requirements

1343 154 12309 prEN 12309-6           Gas-fired sorption appliances for heating and/or cooling with     4020 MECMA
                                      a net heat input not exceeding 70 kW - Part 6: Calculation of
                                      seasonal performances
1344 154 12309 prEN 12309-7           Gas-fired sorption appliances for heating and/or cooling with     4020 MECMA
                                      a net heat input not exceeding 70 kW - Part 7: Specific
                                      provisions for hybrid appliances
1345 154 12547 prEN 12547             Centrifuges - Common safety requirements                          4020 MECMA
1346 157 7539 FprEN ISO 7539-1        Corrosion of metals and alloys - Stress corrosion testing -       4020 MECMA
                                      Part 1: General guidance on testing procedures (ISO/FDIS
                                      7539-1:2012)
1347 157   7539 FprEN ISO 7539-1      Corrosion of metals and alloys - Stress corrosion testing -       5020 MECMA
                                      Part 1: General guidance on testing procedures (ISO/FDIS
                                      7539-1:2012)
1348 157 12473 prEN 12473 rev         General principles of cathodic protection in seawater             4020 MECMA
1349 157 12496 EN 12496:2012          Galvanic anodes for cathodic protection in seawater and           5020 MECMA
                                      saline mud
1350 157 12696 EN ISO 12696:2012      Cathodic protection of steel in concrete (ISO 12696:2012)         5020 MECMA

1351 157 13174 FprEN ISO 13174        Cathodic protection of harbour installations (ISO/FDIS            5020 MECMA
                                      13174:2012)
1352 157 15280 prEN 15280             Evaluation of a.c. corrosion likelihood of buried pipelines       4020 MECMA
                                      applicable to cathodically protected pipelines
1353 157 16222 EN 16222:2012          Cathodic protection of ship hulls                                 5020 MECMA
1354 157 16701 prEN ISO 16701         Corrosion of metals and alloys - Corrosion in artificial          4020 MECMA
                                      atmosphere - Accelerated corrosion test involving exposure
                                      under controlled conditions of humidity cycling and
                                      intermittent spraying of a salt solution (ISO/DIS 16701:2011)

1355 157 28721 FprEN ISO 28721-4      Vitreous and porcelain enamels - Glass-lined apparatus for        5020 MECMA
                                      process plants - Part 4: Quality requirements for glass-lined
                                      flanged steel pipes and flanged steel fittings (ISO 28721-
                                      4:2010)
1356 159 50393 prEN 50393:2012        Test methods and requirements for accessories for use on          4020 MECMA
                                      distribution cables of rated voltage 0,6/1,0 (1,2) kV

1357 159 50565 prEN 50565-1:2011      Electric cables - Guide to use for cables with a rated voltage    4020 MECMA
                                      not exceeding 450/750 V -- Part 1: General guidance

1358 159 50575 FprEN 50575:2012       Power, control and communication cables - Cables for              4020 MECMA
                                      general applications in construction works subject to reaction
                                      to fire requirements
1359 159 50576 CLC/FprTR 50576:2012   Electric cables - Extended application of test results            5020 MECMA
1360 159 50577 prEN 50577:2012        Electric cables - Fire resistance test for unprotected electric   4020 MECMA
                                      cables (P classification)
1361 159 60811 EN 60811-100:2012      Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                      metallic materials -- Part 100: General
1362 159 60811 EN 60811-201:2012      Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                      metallic materials -- Part 201: General tests - Measurement
                                      of insulation thickness
1363 159 60811 EN 60811-202:2012      Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                      metallic materials -- Part 202: General tests - Measurement
                                      of thickness of non-metallic sheath
1364 159 60811 EN 60811-203:2012      Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                      metallic materials -- Part 203: General tests - Measurement
                                      of overall dimensions
1365 159 60811 EN 60811-301:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 301: Electrical tests - Measurement
                                   of the permittivity at 23 °C of filling compounds

1366 159 60811 EN 60811-302:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 302: Electrical tests - Measurement
                                   of the d.c. resistivity at 23 °C and 100 °C of filling compounds

1367 159 60811 EN 60811-401:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 401: Miscellaneous tests - Thermal
                                   ageing methods - Ageing in an air oven
1368 159 60811 EN 60811-402:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 402: Miscellaneous tests - Water
                                   absorption tests
1369 159 60811 EN 60811-403:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 403: Miscellaneous tests - Ozone
                                   resistance test on cross-linked compounds
1370 159 60811 EN 60811-404:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 404: Miscellaneous tests - Mineral
                                   oil immersion tests for sheaths
1371 159 60811 EN 60811-405:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 405: Miscellaneous tests - Thermal
                                   stability test for PVC insulations and PVC sheaths

1372 159 60811 EN 60811-406:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 406: Miscellaneous tests -
                                   Resistance to stress cracking of polyethylene and
                                   polypropylene compounds
1373 159 60811 EN 60811-407:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 407: Miscellaneous tests -
                                   Measurement of mass increase of polyethylene and
                                   polypropylene compounds
1374 159 60811 EN 60811-408:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 408: Miscellaneous tests - Long-
                                   term stability test of polyethylene and polypropylene
                                   compounds
1375 159 60811 EN 60811-409:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 409: Miscellaneous tests - Loss of
                                   mass test for thermoplastic insulations and sheaths

1376 159 60811 EN 60811-410:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 410: Miscellaneous tests - Test
                                   method for copper-catalyzed oxidative degradation of
                                   polyolefin insulated conductors
1377 159 60811 EN 60811-411:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 411: Miscellaneous tests - Low-
                                   temperature brittleness of filling compounds
1378 159 60811 EN 60811-412:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 412: Miscellaneous tests - Thermal
                                   ageing methods - Ageing in an air bomb
1379 159 60811 EN 60811-501:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 501: Mechanical tests - Tests for
                                   determining the mechanical properties of insulating and
                                   sheathing compounds
1380 159 60811 EN 60811-502:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 502: Mechanical tests - Shrinkage
                                   test for insulations
1381 159 60811 EN 60811-503:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 503: Mechanical tests - Shrinkage
                                   test for sheaths
1382 159 60811 EN 60811-504:2012   Electric and optical fibre cables - Test methods for non-        5020 MECMA
                                   metallic materials -- Part 504: Mechanical tests - Bending
                                   tests at low temperature for insulation and sheaths
1383 159 60811 EN 60811-505:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 505: Mechanical tests - Elongation
                                            at low temperature for insulations and sheaths

1384 159 60811 EN 60811-506:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 506: Mechanical tests - Impact test
                                            at low temperature for insulations and sheaths
1385 159 60811 EN 60811-507:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 507: Mechanical tests - Hot set test
                                            for cross-linked materials
1386 159 60811 EN 60811-508:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 508: Mechanical tests - Pressure
                                            test at high temperature for insulation and sheaths

1387 159 60811 EN 60811-509:2012            Electric and optical fibre cables - Test methods for non-     5020 MECMA
                                            metallic materials -- Part 509: Mechanical tests - Test for
                                            resistance of insulations and sheaths to cracking (heat shock
                                            test)
1388 159 60811 EN 60811-510:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 510: Mechanical tests - Methods
                                            specific to polyethylene and polypropylene compounds -
                                            Wrapping test after thermal ageing in air
1389 159 60811 EN 60811-511:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 511: Mechanical tests -
                                            Measurement of the melt flow index of polyethylene
                                            compounds
1390 159 60811 EN 60811-512:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 512: Mechanical tests - Methods
                                            specific to polyethylene and polypropylene compounds -
                                            Tensile strength and elongation at break after conditioning at
                                            elevated temperature
1391 159 60811 EN 60811-513:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 513: Mechanical tests - Methods
                                            specific to polyethylene and polypropylene compounds -
                                            Wrapping test after conditioning
1392 159 60811 EN 60811-601:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 601: Physical tests - Measurement
                                            of the drop point of filling compounds
1393 159 60811 EN 60811-602:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 602: Physical tests - Separation of
                                            oil in filling compounds
1394 159 60811 EN 60811-603:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 603: Physical tests - Measurement
                                            of total acid number of filling compounds
1395 159 60811 EN 60811-604:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 604: Physical tests - Measurement
                                            of absence of corrosive components in filling compounds

1396 159 60811 EN 60811-605:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 605: Physical tests - Measurement
                                            of carbon black and/or mineral filler in polyethylene
                                            compounds
1397 159 60811 EN 60811-606:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 606: Physical tests - Methods for
                                            determining the density
1398 159 60811 EN 60811-607:2012            Electric and optical fibre cables - Test methods for non-         5020 MECMA
                                            metallic materials -- Part 607: Physical tests - Test for the
                                            assessment of carbon black dispersion in polyethylene and
                                            polypropylene
1399 159 61034 EN 61034-1:2005/FprA1:2012   Measurement of smoke density of cables burning under              5020 MECMA
                                            defined conditions -- Part 1: Test apparatus
1400 159 61034 EN 61034-2:2005/FprA1:2012   Measurement of smoke density of cables burning under              5020 MECMA
                                            defined conditions -- Part 2: Test procedure and
                                            requirements
1401 160 50117 CLC/FprTR 50117-8:2012   Coaxial cables used in cabled distribution networks -- Part 8   5020 MECMA
                                        Repair and substitute of damaged buried cables
1402 160 50288 FprEN 50288-1:2012       Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 1: Generic specification

1403 160 50288 FprEN 50288-10-1:2012    Multi-element metallic cables used in analogue and digital      5020 MECMA
                                        communication and control -- Part 10-1: Sectional
                                        specification for screened cables characterized up to 500
                                        MHz - Horizontal floor and building backbone cables


1404 160 50288 FprEN 50288-11-1:2012    Multi-element metallic cables used in analogue and digital      5020 MECMA
                                        communication and control -- Part 11-1: Sectional
                                        specification for un-screened cables characterised up to 500
                                        MHz - Horizontal and building backbone cables
1405 160 50288 FprEN 50288-2-1:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 2-1: Sectional
                                        specification for screened cables characterised up to 100
                                        MHz - Horizontal and building backbone cables
1406 160 50288 FprEN 50288-2-2:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 2-2: Sectional
                                        specification for screened cables characterised up to 100
                                        MHz - Work area and patch cord cables
1407 160 50288 FprEN 50288-3-1:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 3-1: Sectional
                                        specification for unscreened cables characterised up to 100
                                        MHz - Horizontal and building backbone cables
1408 160 50288 FprEN 50288-3-2:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 3-2: Sectional
                                        specification for unscreened cables characterised up to 100
                                        MHz - Work area and patch cord cables
1409 160 50288 FprEN 50288-4-1:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 4-1: Sectional
                                        specification for screened cables characterised up to 600
                                        MHz - Horizontal and building backbone cables
1410 160 50288 FprEN 50288-4-2:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 4-2: Sectional
                                        specification for screened cables characterised up to 600
                                        MHz - Work area and patch cord cables
1411 160 50288 FprEN 50288-5-1:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 5-1: Sectional
                                        specification for screened cables characterized up to 250
                                        MHz - Horizontal and building backbone cables
1412 160 50288 FprEN 50288-5-2:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 5-2: Sectional
                                        specification for screened cables characterized up to 250
                                        MHz - Work area and patch cord cables
1413 160 50288 FprEN 50288-6-1:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 6-1: Sectional
                                        specification for unscreened cables characterised up to 250
                                        MHz - Horizontal and building backbone cables
1414 160 50288 FprEN 50288-6-2:2012     Multi-element metallic cables used in analogue and digital      4020 MECMA
                                        communication and control -- Part 6-2: Sectional
                                        specification for unscreened cables characterised up to 250
                                        MHz - Work area and patch cord cables
1415 160 50288 FprEN 50288-9-1:2012     Multi-element metallic cables used in analogue and digital      5020 MECMA
                                        communication and control -- Part 9-1: Sectional
                                        specification for screened cables characterised up to 1 000
                                        MHz - Horizontal and building backbone cables
1416 160 50289 EN 50289-4-16:2012       Communication cables - Specifications for test methods --       5020 MECMA
                                        Part 4-16: Environmental test methods - Circuit integrity
                                        under fire conditions
1417 160 50407 prEN 50407-2:2012        Multi-pair cables used in high bite rate digital access            4020 MECMA
                                        telecommunication networks -- Part 2: Indoor multi-pair/quad
                                        cables for installation in Multi Dwelling Units shaft supporting
                                        universal services, xDSL and applications up to 100 MBits
                                        over IP
1418 160 62037 EN 62037-1:2012          Passive RF and microwave devices, intermodulation level   5020 MECMA
                                        measurement -- Part 1: General requirements and measuring
                                        methods
1419 160 62037 FprEN 62037-2:2012       Passive r.f. and microwave devices, intermodulation level          5020 MECMA
                                        measurement -- Part 2: Measurement of passive
                                        intermodulation in coaxial cable assemblies
1420 160 62037 FprEN 62037-5:2012       Passive r.f. and microwave devices, intermodulation level          5020 MECMA
                                        measurement -- Part 5: Measurement of passive
                                        intermodulation in filters
1421 160 62037 FprEN 62037-6:2012       Passive r.f. and microwave devices, intermodulation level          5020 MECMA
                                        measurement -- Part 6: Measurement of passive
                                        intermodulation in antennas
1422 161 60952 FprEN 60952-1:2011       Aircraft batteries -- Part 1: General test requirements and        5020 MECMA
                                        performance levels
1423 161 60952 FprEN 60952-2:2011       Aircraft batteries -- Part 2: Design and construction              5020 MECMA
                                        requirements
1424 161 60952 FprEN 60952-3:2011       Aircraft batteries -- Part 3: Product specification and            5020 MECMA
                                        declaration of design and performance (DDP)
1425 161 61056 EN 61056-1:201X          General purpose lead-acid batteries (valve-regulated types) --     5020 MECMA
                                        Part 1: General requirements, functional characteristics -
                                        Methods of test
1426 161 61056 EN 61056-2:201X          General purpose lead-acid batteries (valve-regulated types) -- 5020 MECMA
                                        Part 2: Dimensions, terminals and marking
1427 161 61427 FprEN 61427-1:2012       Secondary cells and batteries for Renewable Energy Storage 5020 MECMA
                                        - General Requirements and methods of test -- Part 1:
                                        Photovoltaic Off grid application
1428 161 61951 FprEN 61951-1:2012       Secondary cells and batteries containing alkaline or other         5020 MECMA
                                        non-acid electrolytes - Portable sealed rechargeable single
                                        cells -- Part 1: Nickel-cadmium
1429 161 61982 EN 61982:201X            Secondary batteries (except lithium) for the propulsion of         5020 MECMA
                                        electric road vehicles - Performance and endurance tests

1430 161 62133 FprEN 62133:2012         Secondary cells and batteries containing alkaline or other         5020 MECMA
                                        non-acid electrolytes - Safety requirements for portable
                                        sealed secondary cells, and for batteries made from them,
                                        for use in portable applications
1431 161 62281 FprEN 62281:2012         Safety of primary and secondary lithium cells and batteries        5020 MECMA
                                        during transport
1432 161 62281 FprEN 62281:2012         Safety of primary and secondary lithium cells and batteries        5020 MECMA
                                        during transport
1433 161 62282 EN 62282-2:2012          Fuel cell technologies -- Part 2: Fuel cell modules                5020 MECMA
1434 161 62282 EN 62282-3-100:2012      Fuel cell technologies -- Part 3-100: Stationary fuel cell         5020 MECMA
                                        power systems - Safety
1435 161 62282 EN 62282-6-              Fuel cell technologies -- Part 6-100: Micro fuel cell power        5020 MECMA
               100:2010/FprA1:2012      systems - Safety
1436 161 62282 EN 62282-6-              Fuel cell technologies -- Part 6-100: Micro fuel cell power        5020 MECMA
               100:2010/FprA1:2012      systems - Safety
1437 161 62282 FprEN 62282-3-201:2012   Fuel cell technologies -- Part 3-201: Small stationary fuel cell   5020 MECMA
                                        power systems - Performance test methods
1438 161 62282 FprEN 62282-5-1:2012     Fuel cell technologies -- Part 5-1: Portable fuel cell power       5020 MECMA
                                        systems - Safety
1439 161 62282 FprEN 62282-6-300:2011   Fuel cell technologies -- Part 6-300: Micro fuel cell power        5020 MECMA
                                        systems - Fuel cartridge interchangeability
1440 164 50579 CLC/TR 50579:2012        Electricity metering equipment (a.c.) - Severity levels,           5020 MECMA
                                        immunity requirements and test methods for conducted
                                        disturbances in the frequency range 2 kHz - 150 kHz
1441 165 50341 FprEN 50341-1:2012       Overhead electrical lines exceeding AC 1 kV -- Part 1:             5020 MECMA
                                        General requirements - Common specifications
1442 166 60469 FprEN 60469:2012      Transitions, pulses and related waveforms - Terms,              5020 MECMA
                                     definitions and algorithms
1443 166 60688 FprEN 60688:2012      Electrical measuring transducers for converting a.c. electrical 5020 MECMA
                                     quantities to analogue or digital signals
1444 166 61557 FprEN 61557-10:2011   Electrical safety in low voltage distribution systems up to 1   5020 MECMA
                                     000 V a.c. and 1 500 V d.c. - Equipment for testing,
                                     measuring or monitoring of protective measures -- Part 10:
                                     Combined measuring equipment for testing, measuring or
                                     monitoring of protective measures
1445 166 61557 FprEN 61557-14:2011   Electrical safety in low voltage distribution systems up to 1    5020 MECMA
                                     000 V a.c. and 1 500 V d.c. - Equipment for testing,
                                     measuring or monitoring of protective measures -- Part 14:
                                     Equipment for testing the safety of electrical equipment of
                                     machinery
1446 166 62586 FprEN 62586-1:2012    Power quality measurement in power supply systems -- Part        5020 MECMA
                                     1: Power Quality Instruments (PQI)
1447 166 62586 FprEN 62586-2:2012    Power quality measurement in power supply systems -- Part        5020 MECMA
                                     2: Functional tests and uncertainty requirements
1448 169 12211 EN ISO 12211:2012     Petroleum, petrochemical and natural gas industries - Spiral     5020 MECMA
                                     plate heat exchangers (ISO 12211:2012)
1449 169 12212 EN ISO 12212:2012     Petroleum, petrochemical and natural gas industries - Hairpin-   5020 MECMA
                                     type heat exchangers (ISO 12212:2012)
1450 169 12736 prEN ISO 12736        Petroleum and natural gas industries - Wet thermal insulation    4020 MECMA
                                     coatings for pipelines, flow lines, equipment and subsea
                                     structures (ISO/DIS 12736:2011)
1451 169 13012 EN 13012:2012         Petrol filling stations - Construction and performance of        5020 MECMA
                                     automatic nozzles for use on fuel dispensers
1452 169 13160 FprEN 13160-5         Leak detection systems - Part 5: Tank gauge leak detection       5020 MECMA
                                     systems
1453 169 13480 prEN 13480-8          Metallic industrial piping - Part 8: Additionnal requirements    4020 MECMA
                                     for aluminium and aluminium alloy piping
1454 169 13503 FprEN ISO 13503-6     Petroleum and natural gas industries - Completion fluides        5020 MECMA
                                     and materials - Part 6: Procedure for measuring leakoff of
                                     completion fluids under dynamic conditions (ISO/FDIS 13503-
                                     6:2012)
1455 169 13575 EN 13575:2012         Static thermoplastic tanks for the above ground storage of       5020 MECMA
                                     chemicals — Blow moulded or rotationally moulded
                                     polyethylene tanks — Requirements and test methods
1456 169 13617 EN 13617-1:2012       Petrol filling stations - Part 1: Safety requirements for        5020 MECMA
                                     construction and performance of metering pumps,
                                     dispensers and remote pumping units
1457 169 13628 prEN ISO 13628-14     Petroleum and natural gas industries - Design and operation      4020 MECMA
                                     of subsea production systems - Part 14: Subsea high
                                     integrity pressure protection systems (HIPPS) (ISO/DIS
                                     13628-14:2011)
1458 169 13628 prEN ISO 13628-6      Petroleum and natural gas industries - Design and operation      4020 MECMA
                                     of subsea production systems - Part 6: Subsea production
                                     control systems (ISO/DIS 13628-6:2012)

1459 169 13705 FprEN ISO 13705       Petroleum, petrochemical and natural gas industries - Fired      5020 MECMA
                                     heaters for general refinery service (ISO/FDIS 13705:2012)

1460 169 14125 prEN 14125 rev        Thermoplastic and flexible metal pipework for underground        4020 MECMA
                                     installation at petrol filling stations
1461 169 16321 prEN 16321-1          Petrol vapour recovery during refuelling of motor vehicles at    4020 MECMA
                                     service stations - Part 1: Test methods for the type approval
                                     efficiency assessment of petrol vapour recovery systems

1462 169 16321 prEN 16321-2          Petrol vapour recovery during refuelling of motor vehicles at    4020 MECMA
                                     service stations - Part 2: Test methods for verification of
                                     vapour recovery systems at service stations
1463 169 19900 prEN ISO 19900                    Petroleum and natural gas industries - General requirements       4020 MECMA
                                                 for offshore structures (ISO/DIS 19900:2012)

1464 169 19901 FprEN ISO 19901-7 rev             Petroleum and natural gas industries - Specific requirements      5020 MECMA
                                                 for offshore structures - Part 7: Stationkeeping systems for
                                                 floating offshore structures and mobile offshore units
                                                 (ISO/FDIS 19901-7:2012)
1465 169 19905 EN ISO 19905-1:2012               Petroleum and natural gas industries - Site-specific              5020 MECMA
                                                 assessment of mobile offshore units - Part 1: Jack-ups (ISO
                                                 19905-1:2012)
1466 169 28300 prEN ISO 28300                    Petroleum, petrochemical and natural gas industries -             4020 MECMA
                                                 Venting of atmospheric and low-pressure storage tanks
                                                 (ISO/DIS 28300:2011)
1467 170 12258 EN 12258-1:2012                   Aluminium and aluminium alloys - Terms and definitions -          5020 MECMA
                                                 Part 1: General terms
1468 171    1254 EN 1254-6:2012                  Copper and copper alloys - Plumbing fittings - Part 6: Fittings   5020 MECMA
                                                 with push-fit ends
1469 171    1254 EN 1254-8:2012                  Copper and copper alloys - Plumbing fittings - Part 8: Fittings   5020 MECMA
                                                 with press ends for use with plastics and multilayer pipes

1470 171    1976 EN 1976:2012                    Copper and copper alloys - Cast unwrought copper products         5020 MECMA

1471 171    1977 FprEN 1977                      Copper and copper alloys - Copper drawing stock (wire rod)        4020 MECMA

1472 171    1977 FprEN 1977                      Copper and copper alloys - Copper drawing stock (wire rod)        5020 MECMA

1473 171 12420 prEN 12420                        Copper and copper alloys - Forgings                               4020 MECMA
1474 171 12449 EN 12449:2012                     Copper and copper alloys - Seamless, round tubes for              5020 MECMA
                                                 general purposes
1475 171 12450 EN 12450:2012                     Copper and copper alloys - Seamless, round copper capillary       5020 MECMA
                                                 tubes
1476 171 12451 EN 12451:2012                     Copper and copper alloys - Seamless, round tubes for heat         5020 MECMA
                                                 exchangers
1477 171 12452 EN 12452:2012                     Copper and copper alloys - Rolled, finned, seamless tubes         5020 MECMA
                                                 for heat exchangers
1478 171 13388 FprCEN/TS 13388                   Copper and copper alloys - Compendium of compositions             5020 MECMA
                                                 and products
1479 171 15616 FprEN 15616:2012                  Copper and copper alloys - Determination of cadmium               5020 MECMA
                                                 content - Flame atomic absorption spectrometric method
                                                 (FAAS)
1480 171 16117 FprEN 16117-2:2012                Copper and copper alloys - Determination of copper content - 5020 MECMA
                                                 Part 2: Electrolytic determination of copper in materials with
                                                 copper content higher than 99,80 %
1481 174 61400 FprEN 61400-11:2012               Wind turbines -- Part 11: Acoustic noise measurement              5020 MECMA
                                                 techniques
1482 174 61400 FprEN 61400-12-2:2011             Wind turbines -- Part 12-2: Power performance of electricity      5020 MECMA
                                                 producing wind turbines based on nacelle anemometry

1483 174 61400 FprEN 61400-23:2011          Wind turbine generator systems -- Part 23: Full-scale                  5020 MECMA
                                            structural testing of rotor blades
1484 174 61400 FprEN 61400-4:2012           Wind turbines -- Part 4: Design requirements for wind turbine          5020 MECMA
                                            gearboxes
1485 175 61340 EN 61340-4-1:2004/FprA1:2012 Electrostatics -- Part 4-1: Standard test methods for specific         5020 MECMA
                                            applications - Electrical resistance of floor coverings and
                                            installed floors
1486 184 10223 FprEN 10223-1                     Steel wire and wire products for fencing and netting - Part 1:    5020 MECMA
                                                 Zinc and zinc-alloy coated steel barbed wire
1487 184 10223 FprEN 10223-2                     Steel wire and wire products for fencing and netting - Part 2:    5020 MECMA
                                                 Hexagonal steel wire netting for agricultural, insulation and
                                                 fencing purposes
1488 184 10223 FprEN 10223-4                     Steel wire and wire products for fencing and netting - Part 4:    5020 MECMA
                                                 Steel wire welded mesh fencing
1489 184 10223 FprEN 10223-5                    Steel wire and wire products for fencing and netting - Part 5:   5020 MECMA
                                                Steel wire woven hinged joint and knotted mesh fencing

1490 184 10223 FprEN 10223-6                    Steel wire and wire products for fencing and netting - Part 6:   5020 MECMA
                                                Steel wire chain link fencing
1491 184 10223 FprEN 10223-7                    Steel wire and wire products for fencing and netting - Part 7:   5020 MECMA
                                                Steel wire welded panels for fencing
1492 184 10223 prEN 10223-3                     Steel wire and wire products for fencing and netting - Part 3:   4320 MECMA
                                                Hexagonal steel wire mesh products for civil engineering
                                                purposes
1493 184 10223 prEN 10223-8                     Steel wire and wire products for fencing and netting - Part 8:   4320 MECMA
                                                Welded mesh gabion products
1494 190 14602 EN 14602:2012                    Footwear - Test methods for the assessment of ecological         5020 MECMA
                                                criteria
1495 190 16177 FprEN ISO 16177                  Footwear - Resistance to crack initiation and growth - Belt      5020 MECMA
                                                flex method (ISO/FDIS 16177:2012)
1496 190 16178 CEN ISO/TR 16178:2012            Footwear - Critical substances potentially present in footwear   5020 MECMA
                                                and footwear components (ISO/TR 16178:2012)

1497 190 16179 CEN ISO/TS 16179:2012            Footwear - Critical substances potentially present in footwear   5020 MECMA
                                                and footwear components - Determination of organotin
                                                compounds in footwear materials (ISO/TS 16179:2012)

1498 190 16186 CEN ISO/TS 16186:2012            Footwear - Critical substances potentially present in footwear   5020 MECMA
                                                and footwear components - Test method to quantitatively
                                                determine dimethyl fumarate (DMFU) in footwear materials
                                                (ISO/TS 16186:2012)
1499 190 16187 prEN ISO 16187                   Footwear - Test methods for uppers, lining and insocks -         4020 MECMA
                                                Antibacterial activity (ISO/DIS 16187:2012)
1500 190 16417 CEN/TR 16417:2012                Footwear - Footwear industry guideline for substances of         5020 MECMA
                                                very high concern (Annex XIV of REACH)
1501 192 45501 FprEN 45501:2011                 Metrological aspects of non-automatic weighing instruments       5020 MECMA

1502 193 61182 EN 61182-2-2:2012                Printed board assembly products - Manufacturing description      5020 MECMA
                                                data and transfer methodology -- Part 2-2: Sectional
                                                requirements for implementation of printed board fabrication
                                                data description
1503 193 61189 FprEN 61189-11:201X              Test methods for electrical materials, interconnection           5020 MECMA
                                                structures and assemblies -- Part 11: Measurement of