MATERIAL SAFETY DATA SHEET by ePHG87dN

VIEWS: 6 PAGES: 2

									                     MATERIAL SAFETY DATA SHEET
Products covered by this MSDS                 Sacramento Stucco Co.
Premium Acrylic Finish PLUS &                 PO Box 1166
Premium Acrylic Finish - E Formula            860 Riske Lane
                                              West Sacramento CA 95691
                                              Office (916) 372-7442 Fax (916) 372-4836
Date: May 11, 2005                            www.sacstucco.com

SECTION 1: PRODUCT IDENTIFICATION
Manufacturers’ Identification Code: 5010
Product Class: Textured Acrylic Finishes
Trade Name: Premium Acrylic Finish

SECTION 2: HAZARDOUS INGREDIENTS
                         ACGIH
                 OSHA      TLV
                  PEL    (TWA)                   % BY                         Other Limits
     Ingredients mg/m3    mg/m3                 WEIGHT          CAS #        Recommended
Sand               15       10                   60.6%        14808-60-7
Water             NE       NE                    17.7%         7732-18-5
Acrylic Latex     NE       NE                    12.6%           N/A
Polymer/Binder
Titanium Dioxide  NE         5                    1.9%        13463-67-7
(rutile)

SECTION 3: PHYSICAL DATA
Boiling Range:       N/A
Vapor Pressure:      N/A
Vapor Density:       N/A
Specific Gravity:    1.58-1.71
Melting Point:       N/A
Evaporation Rate:    N/A
Weight Per Gallon:   N/A
Solubility in Water: N/A
Appearance & Odor:   Opaque, semi-solid, wet stucco-like material. Slight ammonia odor.

SECTION 4: FIRE AND EXPLOSION HAZARD DATA
Flash Point:                        N/A
Flammable Limits:                   N/A
LEL:                                N/A
UEL:                                N/A
Extinguishing Media:                N/A
Unusual Fire and Explosion Hazards: Non-combustible
Special Fire Fighting Procedures:   None required.
SECTION 5: HEALTH HAZARD DATA
Primary Routes of Entry:            Skin, Inhalation, Eyes
Health Hazards (Acute & Chronic):   Irritating and abrasive if splashed into the eye because of
                                    sand content: may be a skin irritant to sensitive
                                    individuals. No acute or chronic hazards are known for
                                    the material as packaged at point of manufacture.
Carcinogenicity:                    Contains no listed carcinogens.
Signs and Symptoms of Exposure:     Non established. Non-specific irritation is possible in
                                    sensitive individuals.
Medical Conditions Generally        No known medical conditions aggravated by exposure.
Aggravated by Exposure:
Emergency and First Aid Procedures: Treat for symptoms. If irritation of the eyes, nose, or
                                    throat occurs, move to fresh air. If material gets in eyes,
                                    wash eyes immediately with large amounts of water,
                                    lifting eye lids occasionally. Get medical attention.

SECTION 6: REACTIVITY DATA
Stability:                              Stable
Conditions to Avoid:                    A shortened shelf life is expected with exposure.
Hazardous Polymerization:               Will not occur.
Thermal Decomposition Products:         CO, CO2, CN1, Nox
Incompatibility (Materials to avoid):   Not compatible with strong oxidizing agents or strong
                                        acids.

SECTION 7: SPILL OR LEAK PROCEDURES
Steps to be Taken if Material is Clean up immediately using shovel or scoop.
Released or Spilled:
Waste Disposal Method:           Dispose of waster material to local, state and federal
                                 regulations.
Precautions to be Taken in       Keep in closed, airtight containers. Wear safety goggles
Handling or Storing:             and plastic gloves.
Transportation:                  Stuccolast is not hazardous under US Department of
                                 Transportation regulations.

SECTION 8: SAFE HANDELING AND USE INFORMATION:
Respiratory Protection: Not required for wet mixture used exterior or in well ventilated areas.
                        Approved mechanical filter respirator should be used to remove solid
                        airborne particles during spray, sawing, and sanding operations.
Ventilation:            None required when used exterior. Provide adequate air movement
                        and mechanical ventilation if used in enclosed area.
Protective Gloves:      As needed for physical protection.
Eye Protection:         Safety and splash goggles recommended.
Other Protective        Long sleeved shirt and trousers.
Clothing or Equipment:
Work/ Hygienic          Keep spilled material cleaned up.
Practices:

								
To top