INSTRUCTION by 1og9IC7o

VIEWS: 11 PAGES: 13

									                                    ID-TECK
STAR RFK-101                   PROXIMIT READER




               INSTRUCTION



         Proximity Reader with PINPAD




          ID TECK Co. Ltd.

MANUAL 2001/08        -1-          STAR RFK-101
                                              ID-TECK
STAR RFK-101                             PROXIMIT READER




                        CONTENTS

     1. Introduction                       page 3

     2. Identifying supplied parts         page 3

     3. Specification                      page 3

     4. Installation                       page 4

     5. Wire Color Table of the Reader     page 5

     6. Wire Connection to Controller      page 6

     7. Operation                          page 8

     8. Output Format                      page 9

     9. Warranty and Service               page 13




MANUAL 2001/08                 -2-           STAR RFK-101
                                                                              ID-TECK
STAR RFK-101                                                             PROXIMIT READER



1. Introduction

The STAR RFK-101 is an elegant looking and built in an attractive 4" read range proximity reader with
PINPAD. The RFK-101 has back lighting on the PINPAD that ensure you successful operation
even the night operating. The PINPAD allow you to access door with proximity card and
personal PIN numbers.
Three color LED of green, yellow and red, inside Piezo buzzer sound will guarantee you an
accurate and reliable system operations.




2. Identifying supplied parts
Please unpack and check the contents of the box.




     Reader unit               Wall Mount                 O-ring                Instructions
       (1 ea)                    (1 ea)                    (5 ea)                   (1 ea)




3. Specification

   Read Range/Time                    Up to 4"(10cm) / 30ms
   Input Voltage/Current              DC 12V, 150mA
   Reset                              Power on reset and WDT reset
   LED/Buzzer                         3 Color LED(Red, Yellow and Green) / Piezo Buzzer
   Key_pad                            12key, Back light
   Color                              Dark Pearl Gray



MANUAL 2001/08                                    -3-                            STAR RFK-101
                                                             ID-TECK
STAR RFK-101                                            PROXIMIT READER


  Operating Environment           0℃ ~ +65℃, 10~90% Humidity
  Overall Size(WxHxD)             3.40"x3.94"x1.22"(487x100x31mm)
  Weight                          0.412 lbs(190 g)
  Output Format                   26Bit Wiegand, 8Bit Burst, RS-232, ABA Track II
                                          and 3x4 Matrix format Selectable




4. Installation

4-1. Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and one
     1/2" hole at the center of these two holes.
    (If you have installed electric gang box then skip this step.)
4-2. Using two 6-32 or M3 screws, install wall mount to the wall.
4-3. Insert 5 O-rings to the wall mount as indicated, then route the
       cable of the main unit through the center hole and push the main
       unit to wall mount to lock the main unit and make sure that the
       main unit is locked with wall mount.




MANUAL 2001/08                      -4-                        STAR RFK-101
                                                         ID-TECK
STAR RFK-101                                        PROXIMIT READER



5. Wire Color Table of the Reader

POWER
Power(DC 12V)                        +12V      Red wire
Power(DC 12V)                        0V(GND)   Black wire


OUTPUT
ABA Track II(Card Present)           CLS       Yellow wire
ABA Track II(Clock), Wiegand Data1   RD1       White wire
ABA Track II(Data), Wiegand Data0    RD0       Green wire
RS-232 TX                            TX        Violet wire
KEYPAD Matrix(Column0)               C0        White wire with blue band
KEYPAD Matrix(Column1)               C1        White wire with green band
KEYPAD Matrix(Column2)               C2        White wire with red band
KEYPAD Matrix(Row0)                  R0        Cyan wire
KEYPAD Matrix(Row1)                  R1        Pink wire
KEYPAD Matrix(Row2)                  R2        Orange wire
KEYPAD Matrix(Row3)                  R3        Gray wire




INPUT
LED Control                          LED       Brown wire
Buzzer Control                       BEEP      Blue wire




MANUAL 2001/08                        -5-                    STAR RFK-101
                                                                                ID-TECK
STAR RFK-101                                                               PROXIMIT READER



6. Wire Connection to Controller

  6-1. 26bit weigand+232out(card) and 8bit burst format(pin)




  . The Reader transmit Card data through Wiegand Data0,1 and RS-232 TX line.
  . The Reader transmit Pin data through Wiegand Data0 and 1.(8bit burst format.)
  ( NOTE : When Key_pad output mode is 26Bit wiegand+RS-232output, you must input
             8char and for the last time push "ENT"key)




6-2. ABA Track II+232out(card) and ABA Track II+232out(pin)




. The Reader transmit Card data through Card present, Clock, DATA and RS-232 TX line.
. The Reader transmit Pin data through Card Present, Clock, DATA and RS_232 TX line.
    ( NOTE : You must input at least 1char(max 8char) and for the last time push "ENT"key)




MANUAL 2001/08                                     -6-                              STAR RFK-101
                                                ID-TECK
STAR RFK-101                               PROXIMIT READER


6-3. Disposition of wire connector




MANUAL 2001/08                       -7-       STAR RFK-101
                                                                               ID-TECK
STAR RFK-101                                                              PROXIMIT READER



7. Operation

7-1. Select output mode




      You can select output mode by JP1, JP2 and JP4. Please refers to Table 1.
  Note. JPx is "0", If pin was connected, and not connected is "1".
         The output format was selected when deliver goods from a warehouse.
         Default : JP1-"0", JP2-"0", JP4-"1"




7-2. Operating sequence
      1. First, Reader wire link with Controller.(reference chapter 6.)
      2. Apply power according to specification.
      3. You can see All LEDs are on and you can hear initial beep sound.
      4. You can see Red LED(power led) and Yellow LED(standby led) are on.
      5. Then, the reader condition is standby card or keypad input.
      6. Present proximity card to the reader until you hear beep sound and the Green LED
         will be on for a second and the reader send RF card data to controller.
      7. Push any key of the PINPAD then reader will send pin data signal to controller.
        (When key_pad output mode is ABA Track II + RS232 out mode :

                           input pin data(max 8char) and for the last time push "ENT"key)




MANUAL 2001/08                                   -8-                               STAR RFK-101
                                                                           ID-TECK
STAR RFK-101                                                          PROXIMIT READER



8. Output Format

8-1. 26bit wiegand output format


     1. Data format
            Bit 1          : Even parity bit 1 ~ 13bit
            Bit 2∼9        : Facility code (0 ~ 255)
            Bit 10∼25      :ID number (0 ~ 65535)
            Bit 26         : Odd parity bit 14 ~ 26bit


     2. Timing diagram

            D0                                                                    5V

                         50us
                                                                                  0V
                                1ms
            D1




8-2. ABA Track II output format


     1. Data format(card)




                                                                      Zero bits
                                                                LRC
                                                           End Character
                                                       (11111 Hex ’F’)
                                                   Card Number Data
                                                   (00000 ~ 65,535)
                                    System Code Data(1248P(00000 ~ 00255))
                                    Low bit first, Odd Parity last
                              Start Character(11010, Hex ‘B’)
                      Zero bits(10bit)




MANUAL 2001/08                              -9-                                   STAR RFK-101
                                                                          ID-TECK
STAR RFK-101                                                         PROXIMIT READER


     2. Data format(PIN)



                                                                       Zero bits
                                                                 LRC
                                                           End Character
                                                           (11111 Hex”F”)



                                              PIN data(until 8key)
                                              Low bit first, Odd Parity last
                                      Start Character(11010 Hex”B”)
                           Zero bits(10bit)




     3. Timing diagram




MANUAL 2001/08                            - 10 -                                   STAR RFK-101
                                                                 ID-TECK
STAR RFK-101                                                PROXIMIT READER


8-3. 8Bit burst output format


       1. Data format




       2. Timing diagram


              D0                                                    5V

                            50us
                                                                    0V
                                   1ms
              D1




       Note : First data is MSB and Last data is LSB bit.




MANUAL 2001/08                             - 11 -                STAR RFK-101
                                                           ID-TECK
STAR RFK-101                                          PROXIMIT READER


8-4. RS-232output format
       1. Data format(Baud rate : 9600bps(default))




2. Data structure




8-5. Matrix(3×4) format
       1. Data format




9.

Warranty and Service

MANUAL 2001/08                         - 12 -              STAR RFK-101
                                                                                  ID-TECK
STAR RFK-101                                                                 PROXIMIT READER



The following warranty and service information applies only to the United States of America and
Republic of Korea. For the information in other countries, please contact your local distributor.
To obtain in or out of warranty service, please prepay shipment and return the unit to the appropriate
facility listed below.
IN THE UNITED STATES
RF LOGICS Inc. Service Center
3026 Scott Blvd.,
SANTA CLARA, CA95054
Tel.:     (408) 980-0001
Fax.:     (408) 980-8060
E-mail: rflogics@rflogics.com
Web-site: www.rflogics.com
OUTSIDE OF THE UNITED STATES
ID TECK CO., LTD. Service Center
5F Ace Techno Tower Bldg.,
684-1 Deungchon-dong, Gangsuh-gu,
SEOUL 157-030, KOREA
Tel.:     +82 (2) 659-0055
Fax.:     +82 (2) 659-0086
E-mail: webmaster@idteck.com
Web-site: www.idteck.com


Please use the original container, or pack the unit(s) in a sturdy carton with sufficient packing to prevent
damage, include the following information:
          1. A proof-of-purchase indicating model number and date of purchase.
          2. Bill-to address
          3. Ship-to address
          4. Number and description of units shipped.
          5. Name and telephone number of person to contact.
          6. Reason for return and description of the problem.


NOTE: Damage occuring during shipment is deemed the responsibility of the carrier, and
          claims should be made directly to the carrier.




MANUAL 2001/08                                       - 13 -                             STAR RFK-101

								
To top