Docstoc

Sony - CDX-M850MP - Installation Guide · English 0.55 Mb

Document Sample
Sony - CDX-M850MP - Installation Guide · English 0.55 Mb Powered By Docstoc
					                                                                            3-251-115-31 (1)


                                                                                                   2
                                                                                                   A                                                             AUDIO OUT
                                                                                                                                                                   FRONT
                                                                                                                     SUB OUT (MONO)


                   FM/MW/LW
                   Compact Disc
                   Player                                                                                                            AUDIO OUT
                                                                                                                                       REAR




                   Installation/Connections



                                                                                                   B                                            BUS AUDIO IN




                                                                                                                                              BUS CONTROL IN




                                                                                                                                                         BUS AUDIO IN



                                                                                                                               Source selector*
                                                                                                                                          *
                                                                                                                                    XA-C30




                                                                                                                                                        BUS CONTROL IN                * not supplied


                   CDX-M850MP
                   © 2003 Sony Corporation   Printed in Korea




                                                                                               Cautions                                                 Connection example (2)
 1                                                                                             • This unit is designed for negative earth 12 V          Notes (2-A)
                                                                                                                                                        • Be sure to connect the black earth lead cord
                                                                                                 DC operation only.
                                                                                               • Do not get the wires under a screw, or caught            before connecting the amplifier.
 1                             2                 3                  4                                                                                   • If you connect an optional power amplifier and do
                                                                                                 in moving parts (e.g., seat railing).
                                                                                                                                                          not use the built-in amplifier, the beep sound will
                                                                                               • Before making connections, turn the car
                                                                                                                                                          be deactivated.
                                                                                                 ignition off to avoid short circuits.
                                                                                   ×4          • Connect the yellow and red power input leads           Tip (2-B- )
                                                                                                 only after all other leads have been connected.        For connecting two or more CD/MD changers, the
                                                                                               • Run all earth wires to a common earth                  source selector XA-C30 (optional) is necessary.
                                                                                                 point.
                                                                                               • Be sure to insulate any loose unconnected
 5                              6                       7                                        wires with electrical tape for safety.

                                                                                               Notes on the power supply cord (yellow)
                                                                                                                                                        Connection diagram (3)
                                                                                               • When connecting this unit in combination with          1 To a metal surface of the car
                                                                                                                                                            First connect the black earth lead, then connect
                                                                                                 other stereo components, the connected car
                                                                                                                                                            the orange/white striped, yellow, and red power
                                                                                   ×2            circuit’s rating must be higher than the sum of            input leads.
                                                                                                 each component’s fuse.                                 2   To the power aerial control lead or power
                                                                                               • When no car circuits are rated high enough,                supply lead of aerial booster amplifier
                                                                                                 connect the unit directly to the battery.                  Notes
                                                                                                                                                            • It is not necessary to connect this lead if there
                                                                                                                                                              is no power aerial or aerial booster, or with a
                                                                                                                                                              manually-operated telescopic aerial.
                                                                                                                                                            • When your car has a built-in FM/MW/LW aerial
Equipment used in illustrations (not supplied)
                                                                                                                                                              in the rear/side glass, see “Notes on the control
                                                                                               Parts Iist (1)                                                 and power supply leads.”
                                                                                                                                                        3   To AMP REMOTE IN of an optional power
                                                                                               • The numbers in the list are keyed to those in              amplifier
                      Front speaker
                                                                                                 the instructions.                                          This connection is only for amplifiers. Connecting
                                                                CD/MD changer
                                                                                               • The bracket 1 is attached to the unit before               any other system may damage the unit.
                                                                                                 shipping. Before mounting the unit, use the            4   To the interface cable of a car telephone
                                                                                                 release keys 7 to remove the bracket 1 from            5 To a car’s illumination signal
                                                                                                 the unit. For details, see “Removing the                   Be sure to connect the black earth lead to a
                                                                                                 bracket (4)” on the reverse side of the sheet.             metal surface of the car first.
                                                                                               • Keep the release keys 7 for future use as              6   To the +12 V power terminal which is energised
                      Rear speaker                              Active subwoofer                                                                            in the accessory position of the ignition key
                                                                                                 they are also necessary if you remove the
                                                                                                                                                            switch
                                                                                                 unit from your car.                                        Notes
                                                                                                                                                            • If there is no accessory position, connect to the
                                                                                               Caution
                                                                                                                                                              +12 V power (battery) terminal which is
                                                                                               Handle the bracket 1 carefully to avoid injuring
                                                                                                                                                              energised at all times.
                                                                                               your fingers.
                                                                                                                                                              Be sure to connect the black earth lead to a
                      Power amplifier                           Rotary commander RM-X4S                                                                       metal surface of the car first.
                                                                                                                                                            • When your car has a built-in FM/MW/LW aerial
                                                                                                                                                              in the rear/side glass, see “Notes on the control
                                                                                                                                                              and power supply leads.”
                                                                                                                                                        7   To the +12 V power terminal which is energised
                                                                                                                                                            at all times
                                                                                                                                                            Be sure to connect the black earth lead to a
                                                                                                           1                    Catch                       metal surface of the car first.
                                                                                               Note
                                                                                               Before installing, make sure that the catches on
                                                                                               both sides of the bracket 1 are bent inwards 2 mm.
                                                                                               If the catches are straight or bent outwards, the unit
                                                                                               will not be installed securely and may spring out.
     3                                                              *1
                                                                                                                                                      *4                  Source selector
                                                                                                                                                                          (not supplied)
                                                                                                                           *3                                                               Supplied with the CD/MD changer


                                                                                                                                                                               XA-C30
                                                            BUS AUDIO IN
                                                              /AUX IN*5
                                 from car aerial

                                                                                                                       AUDIO OUT         Supplied with XA-C30
                                                                                                                         FRONT                                                                         *1 RCA pin cord (not supplied)

                                       *1                                                                          L                                                                                   *2 Insert with the cord upwards.

                                                SUB OUT (MONO)                                                     R
                                                                                                                                                                                                       *3 Auxiliary optional equipment such
                                                                                        BUS      REAR      FRONT
                                                                                      AUDIO IN
                                                                                       AUX IN
                                                                                                    AUDIO OUT                                                                                             as portable DVD player (not
                                                                                                                                                                                                          supplied)
                                                           *2
                                                                                    AUDIO OUT                          Fuse (10 A)                 BUS
                                                                                                                                                                                                       *4 supplied with the auxialiry
                                                                                      REAR                                                      CONTROL IN
                                                                REMOTE IN                                                                                                                                 equipment


                                                                             Blue/white striped                                                                                                        *5 Be sure to match the colour-
                               AMP REM                                                                                                    6                                                               coded code for audio to the
                   3                                                                                                                     Black                                                            appropriate jacks from the unit.
                               Max. supply current 0.3 A                                                                                                                                                  If you connect an optional CD/
                                                                                                                                                                                                          MD unit, you cannot use AUX IN
                                                                                                                                                                                            1             terminal.
                                                                             White
                                                                                                                                         Blue
          Left                                                                                                                                                                ANT REM
                                                                             White/black striped                                                                                            2
                                                                                                                                                                Max. supply current 0.1 A
                                                                                                                                         Light blue
                                                                             Grey                                                                                                   ATT
           Right                                                                                                                                                                            4
                                                                             Grey/black striped
                                                                                                                                         Orange/white striped
                                                                                                                                                                    ILLUMINATION
                                                                             Green                                                                                                          5
           Left
                                                                                                                                         Red
                                                                             Green/black striped
                                                                                                                                                                                            6
                                                                             Purple                                                      Yellow
           Right
                                                                                                                                                                                            7
                                                                             Purple/black striped




Notes on the control and power supply leads                                                                                                                                                 •
• The power aerial control lead (blue) supplies +12 V                                                                                                             2
  DC when you turn on the tuner or when you
                                                                •                                                                                          2
  activate the AF (Alternative Frequency), TA (Traffic                                                                                                                                      •
                                                                •                                                                                 •
  Announcement) function.
                                                                                                                                                  •
• When your car has built-in FM/MW/LW aerial in
  the rear/side glass, connect the power aerial                 •
  control lead (blue) or the accessory power input                                                                                                                                          •
                                                                                                                                                           2
  lead (red) to the power terminal of the existing              •
  aerial booster. For details, consult your dealer.
• A power aerial without relay box cannot be used
                                                                •
  with this unit.
                                                                •
Memory hold connection
When the yellow power input lead is connected,                                                                                                                                              •
power will always be supplied to the memory circuit                                                                                                             3                           •
even when the ignition key is turned off.                       •
                                                                                                                                                  1
                                                                                                                                                                                            •
Notes on speaker connection
• Before connecting the speakers, turn the unit off.            •                                                                                                                           •
• Use speakers with an impedance of 4 to 8 ohms ,                                                                                                 2
                                                                                                                                                                                            •
  and with adequate power handling capacities to                                                                                                                                            •
  avoid its damage.
• Do not connect the speaker terminals to the car                                                                                                      •
                                                                                                                                                                                            •
  chassis, or connect the terminals of the right
  speakers with those of the left speaker.                                                                                                             •
• Do not connect the earth lead of this unit to the                                   1                                                                                                     •
  negative (–) terminal of the speaker.                                                                                                           3
• Do not attempt to connect the speakers in parallel.           •
• Connect only passive speakers. Connecting active              •        1
  speakers (with built-in amplifiers) to the speaker                                                                   7             1
  terminals may damage the unit.                                                                                                                  4
• To avoid a malfunction, do not use the built-in                                                                                                 5
                                                                             4
  speaker wires installed in your car if the unit shares        •
  a common negative (–) lead for the right and left                                                                                               6
                                                                                                                   7
  speakers.
• Do not connect the unit’s speaker cords to each
  other.                                                                                                                                               •

Note on connection                                                            1
If speaker and amplifier are not connected correctly,                                                                                                  •
“Failure” appears in the display. In this case, make
sure the speaker and amplifier are connected                                                                                                      7
correctly.




                                                                         1

                                                                                      1
4           7                                                                                                                  5
                                                                                                                            Extended portion of the front
                                                                                                                            panel



                      Face the hook inwards.
                                               c                                   c
    1
                                                                                                                                                                          17.6 mm
                                                                                                                                                 6.4 mm




6 *                                  1                                                    2                                     3                 Dashboard

                                                                                                                                                                                    Fire wall


                                                                                                                                                     1
                                                              182
                                                                    mm
                                                                                                                                   5

                                                                                                                                                                                        2
                                                                              53 m
                                                                                      m



                                                                                              Claws
                                                                                                                                                                                                3
                                        1




7 A TOYOTA                                                                                            B NISSAN
        4                                                                                                    4
max. size                                                                                             max. size
5 × 8 mm                                                                                              5 × 8 mm


                                                    to dashboard/centre console                                                                                 to dashboard/centre console




                Bracket
                                                                                  4                                                                                                           4
                                                                                  max. size                                    Bracket                                                          max. size
                                                                                  5 × 8 mm                                                                                                      5 × 8 mm




                                                        Bracket                                                                                                           Bracket




                     Existing parts supplied with your car                                                                        Existing parts supplied with your car




8
                            Main-display position                                                                 Sub-display position
Precautions                                           Mounting the unit in a Japanese
•Choose the installation location carefully so        car (7)                                             •                               7
 that the unit will not interfere with normal
                                                      You may not be able to install this unit in some
 driving operations.                                                                                      •
                                                      makes of Japanese cars. In such a case, consult
•Avoid installing the unit in areas subject to        your Sony dealer.
 dust, dirt, excessive vibration, or high
 temperatures, such as in direct sunlight or near     Note
                                                                                                          •                                           4
 heater ducts.                                        To prevent malfunction, install only with the
•Use only the supplied mounting hardware for          supplied screws 4.
 a safe and secure installation.

Mounting angle adjustment
Adjust the mounting angle to less than 60°.
                                                      Warning when installing in a car
                                                      without ACC (accessory) position                                                            (OFF)
                                                      on the ignition key switch                                      4
Removing the bracket (4)                              After tuning off the ignition, be sure to
                                                                                                                                  1

Before installing the unit, remove the                press and hold (OFF) on the unit until the                      7               1
bracket 1 from the unit.                              clock display disppears.
                                                      Otherwise, the display does not turn off and this           1
1 Insert both release keys 7 together between         causes battery drain.
                                                                                                                                              8
    the unit and the bracket 1 until they click.
2   Pull down the bracket 1, then pull up the
    unit to separate.
                                                                                                                              5
                                                      RESET button (8)
                                                      When the installation and connections are
Extended portion of the front                         completed, be sure to press the RESET button
panel (5)                                             with a ballpoint pen, etc.
                                                                                                                      6


                                                                                                                          6   *
Mounting example (6)
Installation in the dashboard

                                                                                                          •
When installing this unit, be sure to close the
                                                                                                              6
front panel of the unit. (6-*)                                                                            •       5
If the front panel is opened while installing and                                                             6
given too much force, it may cause a
malfunction.

Notes
• Bend these claws outwards for a tight fit, if
  necessary. (6-2)
• Make sure that the 4 catches on the protection
  collar 5 are properly engaged in the slots of the
  unit. (6-3)

				
DOCUMENT INFO
Shared By:
Stats:
views:74
posted:9/10/2008
language:Newar / Nepal Bhasa
pages:4