How to update your Belkin Router Firmware and secure the router
Please open your browser and in the address bar, type in 192.168.2.1 and press Enter. This will take you to the Router Page.
Open a new Browser Window and go to http://www.belkin.com/support
Then Scroll all the way to the bottom where you will see F5D72304 v7xxx Firmware Update.
After the file saves, click on Close.
Then go back to your Router page.
Click on Save/Backup Settings. It is recommended that you save your current configuration
Click on Firmware update
Then click on Browse. Click on your desktop and then find the file that you just downloaded. The name if the file is “f5d7230
4v7_us_9.01.10.bin”. then click open.
This will take you back to the Firmware update screen. Then click on Update
Then click on the OK Button
A Warning box will come up advising you not to do anything.
Click on the OK Button. This will take you back to the Update screen where you will see a timer start counting down from 210
While the timer is counting down you may see “A Network Cable is Unplugged” in the bottom right of your screen. This is normal.
Then it will come back on.
Once the counter goes back to Zero, the screen will flash and go back to the default Screen.
You will need to log back in if you need to make more changes.