Learning Center
Plans & pricing Sign in
Sign Out

Macromedia Flash 8 Tint Color


Macromedia Flash 8 Tint Color

More Info
									Step 2
Create a new flash document.Press Ctrl+J key on the keyboard (Document Properties) and set
the dimensions of your document as the dimensions of picture (in my example 400x300px).
Select any color as background color. Set your Flash movie's frame rate to 35 and click ok.

Step 3

Choose file > Import > Import to stage (Shortcut key: Ctrl+R) and import any picture into a flash

Step 4

While the picture is still selected, go to the Align Panel (Ctrl+K) and do the following:

1. Make sure that the Align/Distribute to Stage button is turned on,
2. Click on the Align horizontal center button and
3. Click the Align vertical center button.

                                                                                     Sajith Ali AR
Step 5
While the picture is still selected, press F8 key (Convert to Symbol) to convert this picture into a
Movie Clip Symbol.

Step 6

Press after that F6 key, then times.

Step 7

Go back on frame 2, take the Selection Tool (V) and click once on the picture to select it. After
that, go to the Properties Panel (Shortcut key: Ctrl+F3) below the stage. On the right, you will
see the Color menu. Select Tint in it, for Tint color choose yellow and put it down to 26%. See
the picture below.

Step 8

Repeat this process also for every other frames, but for Tint color choose some other.

Step 9

Go back on frame 2, take the Free Transform Tool (Q) and enlarge the picture a little. Do this
also for frame 4,6,8 and 10.

                                                                                      Sajith Ali AR

To top