Component of Electronic Lab Design

Document Sample
Component of Electronic Lab Design Powered By Docstoc
					                                               INSTRUMENT LIST
S. #                             INSTRUMENTS
        1   Dual Power Supply
        2   Digital Oscilloscope
        3   Function Generator
        4   Function Generator
        5   Digital Multimeter
        6   Soldering Station
        7   PCB Drill Machine
        8   Magnifying Glass with lamp
        9   Digital Counter
       10   Energy Meter
       11   Sound Level Meter
       12   AM & FM Signal Generator
       13   IC Tester (TTL & CMOS)
       14   HTV Tester
       15   Pattern Generator
       16   Meggar
       17   Wheatstone Bridge
       18   RLC meter
       19   AF & RF Generator
       20   Electronic Multimedia
       21   Computer with LCD
       22   Colour Printer HP
       23   Scanner HO
       24   UPS with Battery
       25   TV field Level Meter
       26   Transistor Tester
       27   Attenuator (Audio)
       28   Two Channel Audio level Meter
       29   Distortion Meter
       30   Semi Conductor tester
       31   Analogue Multimeter
       32   Digital Trainer Heath kit
       33   Electronic Scanner
       34   Electronic Weighting Machine
       35   Spectrum analyzer
       36   Tool Kit GOOT



                                                    TOOLS
S. #                               TOOLS NAME
        1   Star set
        2   Combination plier
        3   Cutter plier
        4   Nose plier
        5   Wire steeper
        6   Soldering Station
        7   Soldering Sucker
        8   Hacksaw
        9   Hacksaw
       10   Tweezer
       11   Brush
       12   File
       13   Soldering Iron
       14   Lamp
       15   Magnifying glass with lamp
       16   Jewellery Set
       17   Drill Machine
       18   Vice for PCB


                                                ELECTRONICS LAB
S. #                                KIT NAME
 1   Digital Logic Card
 2   OpAmp App Card
 3   Analogue Comm card
 4   Lab Volt System Utilities card

 5 Lab volt Base Unit
 6 Lab Volt Motor/ Generator card




 7   T.V. Trainer Kit
 8   Lab Volt FET card
 9   Lab Volt Base unit
10   Lab Volt Semiconductor card




11 DSP kit




12 Micro controller Trainer kit




13 Microwave Trainer Kit
14 Lab volt THYRISTOR & POWER CONTROL Card
15 FPGA trainer kit

 1 ELECTRICITY & ELECTRONIC TRAINER
   COMPLETE SYSTEM COMPRISES:.




1.1 ELECTRICITY &ELECTRONIC CONSTRUCTOR DECK




1.2 BASIC ELECTRICITY AND ELECTRONIC KIT




1.3 AMPLIFIERS AND ELECTRONIC CIRCUIT APPLICATION KIT




1.4 POWER SUPPLY TRAINING KIT


1.5 OPERATIONAL AMPLIFIER TUTOR KIT

1.6 AC /DC COMPREHANSIVE POWER SUPPLY
             DIGITAL ELECTRONIC , MICROPROCESSOR AND MICRO-
           2 CONTROLLER LAB
             COMPLETE SYSTEM COMPRISES:.




          2.1 ADVANCE LOGIC TRAINER




        2.2 POWER SUPPLY FOR ABOVE ADVANCED LOGIC TRAINER
            8086/8088 MICROPROCESSOR DEVELOPMENT & TRAINING
2.3 (A)     SYSTEM




2.3 (B)      APPLICATION BOARD FOR 8086 MICROPROCESSOR TRAINER
           CROSS ASSEMBLER SOFTWARE FOR 8086 MICROPROCESSOR
2.3 ©      TRAINER
           8051 MICROCONTROLLER DEVELOPMENT AND TRAINING
2.4 (A)    SYSTEM
2.4 (B)    APPLICATION BOARD FOR 8051 MICROCONTROLLER




2.4 C       CROSS ASSEMBLER SOFTWARE FOR 8051 MICROCONTROLLER
            PLC TRAINING SYSTEM WITH APPLICATION MODULES COMPLETE
          3 SYSTEM COMPRISING FOLLOWING:
3.1 MITSUBISHI ENTRY LEVEL PLC PACK

3.2 TRAFFIC SIGNAL CONTROL MODULE
    PLC APPLICATION SOFTWARE FOR USE WITH TRAFFIC SIGNAL
3.3 CONTROL MODULE
3.4 PLC INTERFACE




4.1 THYRISTOR AND MOTOR CONTROL TRAINER
4.2 PERSONEL COMPUTER
    COMMUNICATION LABORATORY
  5 ANALOGUE COMMUNICATION SYSTEM TRAINER

    COMPLETE SYSTEM COMPRISESING OF FOLLOWING MODULES
    BASIC ANALOGUE COMMUNICATION SYSTEM MODULES
5.1 COMPRISES OF

    ADVANCE ANALOG COMMUNICATION SYSTEM MDULES
5.2 COMPRISES OF

    INTRODUCTION TO PRINCIPLES USED IN DIGITAL SYSTEM
5.3 MODULE COMPRISES 5 ADDITIONAL MODULES

   BASIC DIGITAL COMMUNICATION SYSTEM TRAINER, COMPLETE
 6 SYSTEM COMPRISES OF
7 FIBRE OPTICS EDUCATOR


  OPTICAL FIBRE AND DIGITAL COMMUNICATION TRAINER WITH
8 RS -232 INTERFACE MODULE FIT OFT
  OPTO ELECTRONIC
9 ANTENNA LAB TRAINER




 A COMPUTER CONTROLLED TRAINER SHOULD BE COMPRISING
 TWO TOWERS,EACH APPROXIMATE 1 METER HIGH AND ONE OF
 WHICH SHOULD BE A LOWER POWER GENERATOR CONTROLLED
 BY A FREQUENCY SYNTHESIZER AND MOTOR / SHAFT ENCODER
 ASSEMBLY TO ROTATE THE ANTENNA.
 UNDER TEST THROUGH ATLEAST 360
  THE ANTENNA SYSTEM SHOULD BE INVESTIGATED SHOULD BE
  MOUNTED ON TOP OF THIS TOWER. THE SECOND TOWER
  SHOULD BE CONTAINED RECEIVER, CONTROLLED BY A
  FRQUENCY SYNTHESISTER, WHICH PRODUCE A DC OUTPUT
  REPRESENTING THE RECEIVED SIGNAL INTENSITY. THE SYSTEM
  SHOULD BE OPERATE IN CONJUCTION WITH A PENTIUM 4 OR
  COMPATIBLE MICROCOMPUTER TO DISPLAY E & H PLANE POLAR
  DIAGRAMS AND FREQUENCY RESPONSES OVER A RANGE OF
  ULTRA HIGH FREQUENCIES AND SHOULD ALSO BE CONTAINED
  ANTENNA SIMULATION SOFTWARE. THE WHOLE SYSTEM
  SHOULD BE EASILY ACCOMODITATED ON A NORMAL
  LABORATORY BENCH ON OPERATOR'S MANNUAL, STUDENT'S
  AND TUTOR'S WORKBOOKS SIMULATION SOFTWARE MANUAL
  AND TWO REFERENCE TEXT BOOKS SHOULD BE PROVIDED WITH
  THE SYSTEM.
  PERSONAL COMPUTER




10 MICROWAVE TRAINER
11 MIDE SOFTWARE FOR MICROWAVE
INSTRUMENT LIST
                  SPECIFICATION
  TTI-EX354D
  RIGOL-1052E
  20 MHZ-TT1
  5 MHZ
  FLUKE-177
  GOOT
  SANWA 360TR




  GW INSTEK GSP-830




          TOOLS
                        SPECIFICATION




  Large
  Small


  round,triangle,flat
  25 watts, 40 Watt




  hand & Electric




ELECTRONICS LAB
                        SPECIFICATION
DIGITAL LOGIC FUNDAMENTALS. LABVOLT, MODEL # 91014
OPERATIONAL AMPLIFIER APPLICATIONS. LABVOLT MODEL # 91013
ANALOGUE COMMUNICATION. LABVOLT MODEL # 91018
SYSTEM AND UTILITIES. LABVOLT MODEL # 94531-00

COMPUTER INTERFACE BASE UNITWITH BUILT-IN POER SUPPLY. LABVOLT, MODEL # 91000-45
MOTOR GENERATORS AND CONTROLS. LABVOLT, MODEL # 91024

TELEVISION TRAINER. 30 FAULTS WITH (20 INCH COLOUR MULTI SYSTEM MONITOR), 220-110/50-
60/1PH,93 WATTS,75 OHMS VHF CHANNEL 1-11,UHF CHANNEL 21-69 BUILT-IN SPEAKER FOR
DYNAMIC H-FI SOUND. MANUFACTURER : LAB TECH INTERNATIONAL LTD. PART # EAV-TVT-E3
FET FUNDAMENTALS. LABVOLT, MODEL # 91010
MANNUAL BASE UNIT WITH BUILT-IN POWER SUPPLY. LABVOLT, MODEL # 91000-35
SEMI CONDUCTOR DEVICES. LAB VOLT MODEL # 910005

ADC, DAC, WAVE FORM GENERATOR, DC POWER SUPPLY +5 & +12, 7-SEGMENT DISPLAY, LOGIC
SWITCHES,SOLDER LESS BREAD BOARD, DATA ACQUISITION BLOCK, CHANNEL MULTIPLEXER, SIGNAL
CONDITIONER, TEMPERATURE SENSOR, SPEAKER AND MICROPHONE AND RS-232 PORT. ALSO PC
INTERFACE, DSP TRAINER# DEV-2775 OR EQUIVALENT.
ATMEL & PIC USING C AND ASSEMBLY LANGUAGE, FIXED DC POWER SUPPLY +5 & +12, FUNCTION
GENERATOR, EIGHT LOGIC SWITCHES, POTENTIO METER OF 10K-OHMS & 100K-OHMS, ELECTRONIC
RELAY, LOGIC PROBE AND BUZZER, ZIF SOCKET, SELECTOR SWITCH, INSTEP (INTERACTIVE SELF
TRAINING AND EXPERIMENT PACKAGE), REMOVABLE BREAD BOARD, TRAINER # DEV 2763 OR
EQUIVALENT.
FREQUANCY BAND 2.4 GHZ TO 2.5 GHZ, MODULATION FSK, BIT RATE 4800-14400 BPS, OUTPUT
POWER +4.5 DBM (MAX), 5) IMPEDENCE 50 OHMS, SUBSTRATE MATERIAL ROGERS RO4003C, PCB
THICKNESS 0.508 MM, DIELECTRIC CONSTANT 3.38, DEVICE 12EA 10) DC POWER ADAPTOR, DC POWER
CABLE, RS-232 CABLE,RF CABLE, ANTENNA CABLE, SMA ADAPTOR, 50 OHMS TERMINATOR, TRAINER #
MW-2000 OR EQUIVALENT.
THYRISTOR & POWER CONTROL CIRCUITS,. LABVOLT , MODEL #91011
ALTERA /XILINIX FPGA (150K-1M), ON BOARD OSCILLATOR SOCKET , DUAL PROGRAMMING OPTIONS (
JTAG), PARALLEL PORT, SYSTEM RESET , LEVEL CONVERTOR , SURG PROTECTION , CONFIGURATION
PROM , 7-SEGMENT DISPLAY , RS -232 SERIAL PORT , POWER INDICATOR FOR 5V & 3.3V , PROJECT
BOARD FOR DLD DESIGN & INTERFACING , PRODUCT CD AND MANUAL , TRAINER #DEV-2777 OR
EQUIVALANT




THE DECK SHOULD BE PATCH-BOARD WITH PROVISION FOR DISCRETE COMPONANT , INTEGRATED
CIRCUITS AND HIGH POWER DEVICES . IT SHOULD BE FIT INTO A CONSOLE OR NECESSORY POWER
SUPPLY TO ALLOW ALL THE SOFTWARE CIRCUITS ASSOCIATED WITH THE KIT SHOULD BE
CONSTRUCTED . IT SHOULD BE POWERED FROM THE CONSOLE OR THE POWER SUPPLY AND A FULL
SET OF INTERCONNECTING LEADS SHOULD BE SUPPLIED

TO INTRODUCE THE STUDENTS TO THE BASIC PRINCIPLES OF ELECTRICAL THEORY AND CIRCUITS AND
THE PHYSICAL AND ELECTRICAL CHARACTERISTICS OF COMMONLY USE SEMICONDUCTOR DEVICE AND
CIRCUITS , COMPREHANSIVE MANUALS SHOULD BE SUPPLIED

INCLUDING ALL THE NECESSORY COMPONENTS TO INTRODUCE COMMON SEMICONDUCTOR
AMPLIFIER CONFIGURATION , SHOW THEIR CHARACTERISTICS & HENCE THEIR PARTICULAR USES IN
CIRCUITRY , OPEN BOARD TYPE KIT TO CONSTRUCT COMMON ELECTRONIC CIRCUITS.

THIS EQUIPMENT SHOULD BE USED IN CONJECTION WITH THE DECK TO PROVIDES A COURSE OF
STUDY COVERING DC POWER SUPPLIES. THE COMPREHENSIVE COURSEWARE COVERS
FAMILIARSATION, THEORY , OBJECTIVE , PROCEDURE AND TYPICAL EXPERIMENTS RESULTS.
OPERATION AMPLIFIER TUTOR SHOULD BE COMPRISING WITH THREE IC OP - AMPS, 1 DISCRETE
AMPLIFIER , +10V SWITCH-ABLE SUPPLY , SCALING POTENTIOMETER , ALL CONNECTING LEADS FRONT
PANNEL MIMIC DIAGRAM SHOWING ELEMENT AND CIRCUITS.
POWER SUPPLY TO PROVIDE THE NECESSORY POWER REQUIRMENTS IN ONE COMPACT UNIT
SPACIFICALLY DESIGN FOR USE WITH ABOVE KIT WITH FOLLOWING SPECS.
OUTPUT CAPABILITY

STABILZE 5V ±0.2V @ 1A MAX. , LOAD REGULATION TYPICALLY 0.15 % NOICE AND RIPPLES <10MV .
STABILIZE ±15V ±0.6V @ 0.3A EACH RAIL .
LOAD REGULATION TYPICALLY 0.1 %, NOICE AND RIPPLE < 10MV .
STABILIZE 0-20V @0.35A
LOAD REGULATION TYPICALLY 0.2%
NOICE AND RIPPLE TYPICALLY 5MV




THE SYSTEM COMPRISE UNPOWERED CONSTRUCTION DECK , 1 SET OF 80 INTERCONNECTION LEADS
COMPRISING AS 16 X 12 IN, 16 X 18, 16 X 5 IN, 32 X 3 IN LEADS EACH LENGTH A DIFFERENT COLOUR
FOR EASY IDENTIFICATION, 1 SET OF TTL MODULES AS FOLLOWS:

3-QUAD 2-INPUT NAND, 1-HEX INVERTER, 1-TRPLE 3-INPUT NAND, 3-DUAL 4-INPUT NAND, 5 SINGLE
LEVEL TRIGGERED JK FLIP-FLOP, 1-CARRIER WITH 14 PIN DIL SOCKET AND 1-EMPTY CARRIER COMPLETE
WITH POWER SUPPLYFRONM AN EXTERNAL +5V SUPPLY AND TEACHING MANUAL.


THE EQUIPMENT SHOULD BE A AS PER HARDWARE FEATURES:-

8086 MICROPROCESSOR RUNNING AT 4.9152 MHZ FROM CLOCK GENERATOR DRIVER (8284A), CPU
CONNECTION ACCESSED VIA 40 WAY IDC CONNECTOR FOR EXTERNAL PROCESSOR BUS EXPANSION.

THE EQUIPMENT SHOULD BE SUPPLIED AS FOLLWS:-

AN OPEN BOARD THAT CAN BE USED WITH A PC, COVERING THE TECHNIQUES OF CONTROLLING THE
FIBRE OPTIC DATA TRANSMISSION, KEYBOARD ENTRY, DIGITAL SOUND PRODUCTION, DC AND STEEPER
MOTORS, HEATERS AND VISUAL DISPLAYS E.G. TRAFFIC LIGHTS AND ELECTRONIC MESSAGE BOARDS,
INVOLVING THE FUNDAMENTALS OF MICROPROCESSOR PROGRAMMING, AND APPLICATION SUCH AS
DECISSION MAKING, D/A & A/B CONVERSION, OPEN AND CLOSED LOOP CONTROL, DELAY LOOPS, SUB-
ROUTINES AND EVENT COUNTING. OPTIONAL APPLICATION ARE AVAILABLE. STEEPER MOTOR 24- 201
& LIQUID CRYSTAL DISPLAY.
INPUTS:
8 BIT DIGITAL SWITCH BANK, EXTERNAL ANALOGUE INPUT.
NUMERICAL KEY PAD, OPTICAL FIBRE RECEIVER
OPTICAL SPEED AND POSITION CENSOR
SLIDE POTENTIOMETER, TEMPERATURE SENSOR
OUTPUTS:
2 DUAL SEGMENT DISPALYS, 8 LEDS, ANALOGUE OUTPUT
DC MOTOR, HEATER, OPTICAL FIBRE TRANSMITTOR, SPEAKER


THIS TRAINER SHOULD BE HIGHLY FLEXIBLE SINGLE BOARD COMPUTER BASED ON THE ATMEL
AT89C51ED2 IN SYSTEM.
THIS EQUIPMENT SHOULD BE SUPPLIED AS FOLLOWS:

AN OPEN BOARD THAT CAN BE USED WITH A PC, COVERING THE TECHNIQUES OF CONTROLLING THE
FIBRE OPTIC DATA TRANSMISSION, KEYBOARD ENTRY, DIGITAL SOUND PRODUCTION, DC AND STEEPER
MOTORS, HEATERS AND VISUAL DISPLAYS E.G. TRAFFIC LIGHTS AND ELECTRONIC MESSAGE BOARD
INVOLVING THE FUNDAMENTALS OF MICROPROCESSOR PROGRAMMING, AND APPLICATION SUCH AS
DECISSION MAKING, D/A & A/B CONVERSION, OPEN AND CLOSED LOOP CONTROL, DELAY LOOPS, SUB-
ROUTINES AND EVENT COUNTING. OPTIONAL APPLICATION ARE AVAILABLE. STEEPER MOTOR 24- 201
& LIQUID CRYSTAL DISPLAY.
INPUTS:
8 BIT DIGITAL SWITCH BANK, EXTERNAL ANALOGUE INPUT.
NUMERICAL KEY PAD, OPTICAL FIBRE RECEIVER
OPTICAL SPEED AND POSITION CENSOR
SLIDE POTENTIOMETER, TEMPERATURE SENSOR
OUTPUTS:
2 DUAL SEGMENT DISPALYS, 8 LEDS, ANALOGUE OUTPUT
DC MOTOR, HEATER, OPTICAL FIBRE TRANSMITTOR, SPEAKER
30 I/O MITSUBISHI FOX (16 i/P, 14 o/P) , CONNECTOR ADAPTOR, FX SERIES PROGRAMMING ADAPTOR,
HAND HELD PROGRAMMER, HAND HELD PROGRAMMER CABLE, INTRODUCTION TO PLCs MANUAL
SOFTWARE AND CABLES.

TIMED SEQUENCE CONTROL, INTERRUPT DEVICE CONTROL EASY TO UNDERSTAND PROCESS.




THIS TRAINER SHOULD BE COMPRISES FIRING AND BRIDGES PANNEL, A MOTOR CONTROL CIRCUIT
PANNEL, A 3 PHASE SUPLY PANNEL, SCR & DIOTS PANNEL, AND ALL OF THE LOADS INSTRUMENTATION
ETC. TO ENABLE THE STUDY OF THE PRINCIPLES OF SINGLE AND THREE PHASE RECTIFICATION APPLIED
TO PASSIVE LOADS TO APPLY THYRISTOR CIRCUITS TO THE CONTROL OF DC MOTOR.




SIGNALS SOURCE AND DTECTOR, FILTERS AND TUNED CIRCUITS (2 OFF)
DOUBLE BALANCED MODULATOR, POWER SUPPLY , BOX OF PLUG - IN MODULE AND LEADS

PASSIVE FILTER, SUPERHET , AMPLIFIER AND WAVE FORM SYSNTHESES
LOW PASS FILTER AUDIO MODULE AND DIODE RING BRIDGE

PHASE LOCKED LOOP , SIGMA DELTA , INTEGRATOR, SAMPLE / HOLD
MULTIPLEX ( 2-OFF )

DATA SOURCE, DOUBLE BALANCED MODULATOR
DATA CLOCK REGENERATION, DATA RECOVERY , DATA RECEIVER
AUDIO MODULE TUNED CIRCUIT, POWER SUPPLY
DATA FORMAT MODULE , DOUBLE BALANCED MODULATOR( 2-OFF)
CARRIER PHASE SHIFTER , VOLTAGE CONTROL OSCILLATOR (2-OFF)
LOW PASS FILTER , AUDIO MODULE , QAM GENERATOR
QAM RECEIVER, NOICE MODULE , POWER SUPPLY

A SELF - CONTAINED FIBRE - OPTIC TRAINING EQUIPMENT. TO INCLUDE SEPARATE TRANSMITTER AND
RECEIVER SUITABLE FOR ANALOG AND DIGITAL TRANSMISSION USING TTL , CMOS AND RS232
VOLTAGE LAVEL. BUILT -IN VARIABLE FREQUENCY PSEUDO-RANDOM AND SQUARE WAVE
GENERATORS LOUD SPEAKER, VARIABLE GAIN HIGH AND LOW IMPEDANCE OUTPUTS. COMPLETE
WITH FIBRE-OPTICS CABLES CONNECTOR, TEXT BOOK AND ASSIGNMENTS MANUAL , MICROPHONES
FM RADIO TORCH AND ALL NECESSORY ACCESS IN CLUDING CARRYING CASE.
TH SYSTEM TO TRAIN AT BASIC LAVEL THROUGH TO ADVANCE CONCEPT AND OFFER EXPERIMENT
COVERING :-PRINCIPLES OF FIBRE -OPTIC COMMUNICATION , BASIC OFF DIGITAL BASE BAND
COMMUNICATION , ADVANCE EXPERIMENTATION AND DEVELOPMENT IN FIBRE - OPTIC DIGITAL
COMMUNICATION

MODULLING HARDWARE:

1) OPERATING FREQUENCY: 1200-180 MHZ. 2) SMALLEST FREQUENCY STEP : 125 KHZ. 3)
TRANSMITTOR POWER : 10 mW (max). 1 Mw(normally). 4) RECEIVER BANDWITH 6 MHZ. 5) RECEIVER
DYNAMIC RANGE : 70 dB. 6) RECEIVER OUTPUT PRECISION : 8-BIT. 7) TRANSMITTOR OUTPUT
IMPEDENCE : 50 OHM. 8) RECEIVER INPUT IMPEDENCE : 50 OHMS. 9) RECEIVER LINEARITY : ± 1 dB. 10)
MAXIMUM FREQUENCY STEP RATE : 300/SECOND. 11) TRANSMITTOR FREQUANCY ACCURACY : 100
KHZ. 12) MAXIMUM ANTENNA ROTATION SPEED : 60 DEGREES PER SECOND. 13) ANTENNA POSITION
RESOLUTION : 1 DEGREE. 14) RECEIVER INPUT FOR 1dB COMPRESSION : 5 mW. 15) TRANSMITTOR
OUTPUT POWER VARIATION OVER FULL FREQUENCY RANGE : 2 dB. 16 ) TRANSMITTOR MISMATCH
CAPABILITY : INFINITE. 17) RF CONNECTION SYSTEM : SMB. 18)HEIGHT OF ANTENNA TOWERS : 1
METER. 19) NORMAL RECEIVING ANTENNA : 4X5 ELEMENT LOG PERIODIC. 20) DISTANCE APART : 2 TO
5 METERS.
MICROWAVE TRAINER OPERATING IN THE X-BAND, COMPRISING STANDARD WG 16 WAVEGUIDES
COMPONENTS, A SOLID STATE DRO SOURCE AND A SUPPLY CONSOLE PROVIDING ALL NECESSARY
POWER SUPPLIES MODULLATING FACILITIES AND METERING, PLUS A TUTORIAL TEXT CONTAINING
ATLEAST 9 ASSIGNMENTS.
                                              INSTRUMENT LIST
S. #                            INSTRUMENTS                                   SPECIFICATION
       1 Dual Power Supply
                                                    TTI-EX354D Single outputs, 35V/5A, 18V/10A, 42V/10A, 20V/20A
                                                     Dual or triple outputs, 35V/4A
                                                     Independent digital voltage and current meters
                                                      for each output with 4 digit resolution
                                                     Switchable local or remote sensing
                                                     Constant voltage or constant current operation
                                                     Variable 1.5 - 5.0V auxiliary output at 5A (EX354RT)
                                                     Compact design uses less bench space
                                                     Silent fan-free cooling **
                                                     DC output switches, automatic mode indication

       2 Digital Oscilloscope                       RIGOL-1052EModel
                                                    DS1052E
                                                    Bandwidth: 50 MHz
                                                    Analog Channels: 2
                                                    Vertical Sensitivity: 2 mV/div - 10V/div
                                                    Real-time Sample Rate: 1 GSa/s(each channel),500 MSa/s(dual
                                                    channels)
                                                    Equivalent Sample Rate: 10 GSa/s
                                                    Memory Depth Mode capture rate             common long memory
                                                    one channel                  1 GSa/s         16 kpts    N/A
                                                    500 MSa/s                     500 MSa/s       16 kpts   1 Mpts
                                                    dual channels               500 MSa/s        8 kpts     N.A.
                                                                              250 MSa/sor less    8 kpts    512 kpts
                                                    Standard Interface : USB Host & Device, RS-232, P/F Out
                                                    Vertical Resolution :8 bits
                                                    Math: +, -, ×, FFT
                                                    Max Input Voltage: All inputs 1MΩ‖15pF 300 V RMS CATⅠ
                                                    Cursor Measurements :Manual, Track and Auto Measure modes



                                                    Page 19
3 Analogue Oscilloscope (Dual Channel)

                                         HM-400 HAMEG Reference-Class in Sensitivity and Input Voltage Range
                                          2 Channels with Deflection Coefficients 1 mV/div.…20 V/div., variable up to
                                         50 V/div.
                                          Time Base 100 ns/div.…0.2 s/div., with X Magnification to 10 ns/div.
                                          Low Noise Measuring Amplifiers with high Pulse Fidelity and minimum
                                         Overshoot
                                          Peak to Peak Trigger for stable Triggering 0…50 MHz at 0.5 div. Signal Level
                                         (up to 80 MHz at 1 div.)
                                          Autoset, Save/Recall Memories for 6 Instrument Settings
                                          Yt- and XY-Mode with Z-Input for Intensity Modulation
                                          Component Characterisation with Component Tester (two Terminal
                                         Network Measurement)
                                          Low Power Consumption, no Fan
4 Function Generator                     20 MHZ-TTi 20MHz dial set function generator
                                           0.2Hz to 20MHz frequency range
                                           Sine, square and triangle waveforms plus dc
                                           10mV to 20V pk-pk from 50 Ohms
                                           DC offset control with zero detent
                                           Variable symmetry control
                                           External sweep input
                                           Very low cost.
5 Function Generator                     5 MHZ 0.5 Hz to 5 MHz
                                         Sine, Square, Triangle, Pulse, & Ramp output
                                         Coarse and Fine tuning
                                         4 digit LED display
                                         Variable duty cycle
                                         Variable DC offset
                                         Variable amplitude output plus 20dB attenuator
                                         20Vpp output into open circuit (10Vpp into 50 Ωs)
                                         cUL certified




                                         Page 20
                       FLUKE-177, UNI-T, CD731 a (SANWA) Voltage DC
6 Digital Multimeter   175 - Accuracy* ± (0.15%+2)
                       177 - Accuracy* ± (0.09%+2)
                       179 - Accuracy* ± (0.09%+2)
                       Max. Resolution 0.1 mV
                       Maximum 1000 V
                       Voltage AC
                       Accuracy* ± (1.0%+3)
                       Max. Resolution 0.1 mV
                       Maximum 1000 V
                       Current DC
                       Accuracy* ± (1.0%+3)
                       Max. Resolution 0.01 mA
                       Maximum 10 A
                       Current AC
                       Accuracy* ± (1.5%+3)
                       Max. Resolution 0.01 mA
                       Maximum 10 A
                       Resistance
                       Accuracy* ± (0.9%+1)
                       Max. Resolution 0.1 Ω
                       Maximum 50 MΩ
                       Capacitance
                       Accuracy* ± (1.2%+2)
                       Max. Resolution 1 nF
                       Maximum 10,000 µF
                       Frequency
                       Accuracy* ± (0.1%+1)




                       Page 21
7 SOLDERING STATION   HOT AIR SOLDERING STATION    AOYUE Power Input :
                      available in 110V / 220V
                      Power Consumption:
                      35W
                      Temperature Range:
                      200 - 480 degrees Celsius
                      Heating Element:
                      Ceramic Heater
                      Output Voltage:
                      24V
                      Tip to Ground Resistance:
                      Below 2 ohms
                      Tip to Ground Potential:
                      Below 2mV
                      Station Dimensions:
                      120(w) x 80(h) x 140(d) mm
                      Weight:
                      1.9Kg




                      Page 22
8 SOLDERING IRON   908+ (HOT AIR GUN HOLDER)
                   Station AOYUE-908+
                   Temperature range, °C 100 to 500
                   Soldering iron temperature adjustment Analog, smooth
                   Hot air gun temperature adjustment Analog, smooth
                   Airflow adjustment Analog, smooth
                   Power consumption 250 W (max.)
                   Operating voltage 220 V
                   Airflow 24 l/min (max.)
                   Pump 803 (diaphragm)
                   Dimensions (L × W × H), mm 187 × 128 × 246
                   Soldering iron plug 5-pins
                   Nozzles 1124, 1130, 1196, 1197
                   Hot Air Gun AOYUE-908+
                   Heating element 10093, (2-digits, with concertina wire)
                   Nozzle diameter 21,5 mm
                   Airflow Linear
                   Soldering Iron AOYUE-908+
                   Model 10087
                   Temperature range,°C 200 to 480
                   Resistance between grounding and nozzle 2 Ω
                   Potential between grounding and nozzle 2 mV
                   Operating voltage 24 V
                   Power 60 W
                   Heating element Hakko 003 (4-pins, semi-conducting ceramics)
                   Packed with standard bit Aoyue-I
                   Total length (without cable) 190 mm




                   Page 23
 9 TWO SPEED PCB Drill Machine   FORTEX Specification
                                 Motor Continuously rated
                                 Speed 14,000 r.p.m. - 18,000 r.p.m.
                                 Voltage 200/250 volts A.C.
                                 Rating 100 Watts
                                 Suppression TV and radio suppressed
                                 Throat Clearance 6 inches 150 mm
                                 Height under chuck 1 3/4 inches 44 mm
                                 Chuck Capacity 0 - 5/32 inches 0 - 4 mm
                                 Height 15 inches 400 mm
                                 Lenght 15 inches 400 mm
                                 Width 5 inches 75 mm
                                 Weight 25 lb. 11 Kilogram

10 Magnifying Glass with LIGHT   FT-86B, FEITA Brand Name FEITA
                                 Model Number FT-86B
                                 Size Glass diameter 127mm
                                 Material Glass
                                 Magnification X3 X5 X8 X10 X15 X20
11 Frequency Counter             SFG1002 Output waveforms: Sine, Square, and Triangle, TTL/CMOS
                                 Frequency: 0.1Hz to 2 Mhz
                                 Amplitude: 20 Vp-p
                                 Impedance: 50 Ohm
                                 Attenuation: 20 dB, 40 dB
                                 DC offset: +/- 10 V
                                 Duty cycle: 10%-90%
                                 Rising edge: <100 ns
                                 Measuring range: 1Hz - 20MHz
                                 Size: 12.2" x 3.5" x 9.1"
                                 Net weight: 5 lbs
                                 Input Voltage: 110V/220V
                                 Warranty: 1 year
12 Energy Meter




                                 Page 24
13 Sound Level Meter
                                             TYPE 2250 (SINGLE CHANNEL BrÜel & Kjaer                            Single-
                                             channel input (microphone, accelerometer or direct signal)
                                             4.2 Hz - 22.4 kHz broadband linear frequency range with supplied
                                             microphone Type 4189
                                             16.6 - 140 dB A-weighted dynamic range with supplied microphone Type
                                             4189
                                             Rear panel:
                                             Socket for AC or CCLD input
                                             Trigger input for external trigger
                                             Output socket for generator signal
                                             Headphone output
                                             USB 2.0 (On-the-go) computer interface
                                             USB 2.0 host for connection to printer, GPS, weather station, modem
                                             LAN connection for internet access
                                             Plug-in rechargeable Li-ion battery (> 8h operation)
                                             Data storage on plug-in SD / SDHC memory cards
14 AM & FM Signal Generator                  5 mhz sweep function generator/signal generator/frequeency counter
                                             QUAKKO-5000
15   IC Tester (TTL & CMOS) DIGITAL          MODEL # 575A, B&K PRECISION
16   HTV Tester                              80K-40, FLUKE
17   Pattern Generator                       54000 SERIES VIDEO TV SIGNAL GENERATOR, FLUKE
18   Meggar (Insullation Tester)             FLUKE 1555/1550 C
19   Wheatstone Bridge                       MODEL 8004
20   LCR meter                               MODEL 886, B&K PRECISION
21   AF Generator                            MODEL GAG-810 ( 10HZ TO 1 MHZ), GW INSTEK,
22   DIGITAL RF GENERATOR                    AGILENT E4428C (SUPPLIER VALUE TRONICS)
23   Attenuator (Audio)                      AGILENT 11713A (SUPPLIER VALUE TRONICS)
24   Analyser                                ADVANTEST R3162 (SUPPLIER VALUE TRONICS)
25   Network Analyser                        ADVANTEST R3765AG (SUPPLIER VALUE TRONICS)
26   Spectrum analyzer                       ADVANTEST R3131A (SUPPLIER VALUE TRONICS)
27   Modulation Analyser                     AGILENT 8901A (SUPPLIER VALUE TRONICS)
28   Data Analyser                           LeCroy 8DA6020 (SUPPLIER VALUE TRONICS)
29   Multimedia Projector ( LCD Projector)   VPL-PS 10 multimedia projector


                                             Page 25
30 Black & White Printer                                  HP-P2055 D-CE457A Laser Jet Printer
31 Colour Printer HP                                      HPCP1025 Laser Jet Pro Printer
32 Scanner HP                                             HP G3110 Flatbed Photo
33 UPS with Battery                                       1500 watt-20 A, Brandname SAD, Battery-12 VOLT , 145 A
34 TV field Intensity Meter                               GQ-700D
35 Transistor Tester                                      Model # 520, B&K PRECISION
36 Two Channel Audio level Meter                          SV102A, Type 1 Dual Channel, Acoustic Dosimeter, SVANTEK
37 Distortion Meter                                       DM - 3204 ( Dual Channel)
38 Semi Conductor tester
39 Analogue Multimeter                                    SANWA YX360TRF
40 Digital Trainer Heath kit                              ETW 3700
41 Electronic Scanner
42 Precision Electronic Scale Counter Weighting Machine   XY 100 JC, Xingyun
43 Clamp Meter                                            323 true-rms, FLUKE
44 300 W-360W Switching Bench DC Power Supplies           1685B Series, B&K PRECISION
45 Component Tester                                       Model # 815 B&K PRECESION
46 Dual Display Capacitance Meter                         Model # 830 B&K PRECESION
47 Logic Prob (Digital Logic Prob)                        Model # DP-21
48 Logic Prob (Logic Pulser Prob)                         Model # DP-31A
49 50 Mhz Logic Prob                                      Model # DP-52
50 Sweep Generator                                        4040DDS, B&K PRECISION
51 Coloured Video Camera
52 Computer with LCD Monitor                              CONFIGURATION:-
                                                          MICROPROCESSOR:- INTEL PENTIUM G630, 2.7 GHZ (3MB CACHE)
                                                          MOTHERBOARD:- INTER SERVER BOARD S1200 VTSR                INTEL
                                                          HARD DISK:- SEAGATE 2000GB, 3.5" HDD 32MB CACHE       OPTICAL
                                                          DRIVER:- ASUS DVDRW External
                                                          KEYBOARD/MOUSE:- A4 TECH-7500N WIRELESS WITH MOUSE
                                                          SPEAKERS:- Creative INSPIRE S2 WIRELESS                    USB
                                                          FLASH DRIVE:- KINGSTON 64 GB
                                                          BLUETOOTH KEYBOARD:- ULTRASLIM
                                                          WEBCAM:- MICROSOFT LIFECAM HD-3000                           LCD
                                                          SCREEN:- DELL LED-E1912H 18.5" WIDE SCREEN


                                                          Page 26
                                                  TOOLS
S. #                             TOOLS NAME                                 SPECIFICATION
 1         Tool Kit                                 GOOT
 2         Star set (Changeable)
 3         Combination plier
 4         Cutter plier
 5         Nose plier
 6         Wire steeper
 7         Soldering Station
 8         Soldering Sucker
 9         Hacksaw                                  Large
 10        Hacksaw                                  Small
 11        Tweezer
 12        Brush
 13        File                                     round,triangle,flat
 14        Soldering Iron                           25 watts, 40 Watt
 15        Lamp
 16        Magnifying glass with lamp
 17        Screwdriver (Jewellery Set )
 18        Drill Machine                            hand & Electric
 19        Vice for PCB mounting


                                              ELECTRONICS LAB
S. #                              KIT NAME                                 SPECIFICATION
       1   Digital Logic Card                       DIGITAL LOGIC FUNDAMENTALS. LABVOLT, MODEL # 91014
       2   OpAmp App Card                           OPERATIONAL AMPLIFIER APPLICATIONS. LABVOLT MODEL # 91013
       3   Analogue Comm card                       ANALOGUE COMMUNICATION. LABVOLT MODEL # 91018
       4   Lab Volt System Utilities card           SYSTEM AND UTILITIES. LABVOLT MODEL # 94531-00
                                                    COMPUTER INTERFACE BASE UNITWITH BUILT-IN POER SUPPLY. LABVOLT,
       5 Lab volt Base Unit                         MODEL # 91000-45
       6 Lab Volt Motor/ Generator card             MOTOR GENERATORS AND CONTROLS. LABVOLT, MODEL # 91024

                                                    Page 27
                                             TELEVISION TRAINER. 30 FAULTS WITH (20 INCH COLOUR MULTI SYSTEM
                                             MONITOR), 220-110/50-60/1PH,93 WATTS,75 OHMS VHF CHANNEL 1-
                                             11,UHF CHANNEL 21-69 BUILT-IN SPEAKER FOR DYNAMIC H-FI SOUND.
 7 T.V. Trainer Kit                          MANUFACTURER : LAB TECH INTERNATIONAL LTD. PART # EAV-TVT-E3
 8 Lab Volt FET card                         FET FUNDAMENTALS. LABVOLT, MODEL # 91010
                                             MANNUAL BASE UNIT WITH BUILT-IN POWER SUPPLY. LABVOLT, MODEL #
 9 Lab Volt Base unit                        91000-35
10 Lab Volt Semiconductor card               SEMI CONDUCTOR DEVICES. LAB VOLT MODEL # 910005

                                             ADC, DAC, WAVE FORM GENERATOR, DC POWER SUPPLY +5 & +12, 7-
                                             SEGMENT DISPLAY, LOGIC SWITCHES,SOLDER LESS BREAD BOARD, DATA
                                             ACQUISITION BLOCK, CHANNEL MULTIPLEXER, SIGNAL CONDITIONER,
                                             TEMPERATURE SENSOR, SPEAKER AND MICROPHONE AND RS-232 PORT.
11 DSP kit                                   ALSO PC INTERFACE, DSP TRAINER# DEV-2775 OR EQUIVALENT.
12 Micro controller Trainer kit              Model No. 8051

                                             FREQUANCY BAND 2.4 GHZ TO 2.5 GHZ, MODULATION FSK, BIT RATE 4800-
                                             14400 BPS, OUTPUT POWER +4.5 DBM (MAX), 5) IMPEDENCE 50 OHMS,
                                             SUBSTRATE MATERIAL ROGERS RO4003C, PCB THICKNESS 0.508 MM,
                                             DIELECTRIC CONSTANT 3.38, DEVICE 12EA 10) DC POWER ADAPTOR, DC
                                             POWER CABLE, RS-232 CABLE,RF CABLE, ANTENNA CABLE, SMA ADAPTOR,
13 Microwave Trainer Kit                     50 OHMS TERMINATOR, TRAINER # MW-2000 OR EQUIVALENT.

14 Lab volt THYRISTOR & POWER CONTROL Card   THYRISTOR & POWER CONTROL CIRCUITS,. LABVOLT , MODEL #91011

                                             ALTERA /XILINIX FPGA (150K-1M), ON BOARD OSCILLATOR SOCKET , DUAL
                                             PROGRAMMING OPTIONS ( JTAG), PARALLEL PORT, SYSTEM RESET , LEVEL
                                             CONVERTOR , SURG PROTECTION , CONFIGURATION PROM , 7-SEGMENT
                                             DISPLAY , RS -232 SERIAL PORT , POWER INDICATOR FOR 5V & 3.3V ,
                                             PROJECT BOARD FOR DLD DESIGN & INTERFACING , PRODUCT CD AND
15 FPGA trainer kit                          MANUAL , TRAINER #DEV-2777 OR EQUIVALANT




                                             Page 28
 16 ELECTRICITY & ELECTRONIC TRAINER
    COMPLETE SYSTEM COMPRISES:.
                                                         THE DECK SHOULD BE PATCH-BOARD WITH PROVISION FOR DISCRETE
                                                         COMPONANT , INTEGRATED CIRCUITS AND HIGH POWER DEVICES . IT
                                                         SHOULD BE FIT INTO A CONSOLE OR NECESSORY POWER SUPPLY TO ALLOW
16.1 ELECTRICITY &ELECTRONIC CONSTRUCTOR DECK            ALL THE SOFTWARE CIRCUITS ASSOCIATED WITH THE KIT SHOULD BE
                                                         CONSTRUCTED . IT SHOULD BE POWERED FROM THE CONSOLE OR THE
                                                         POWER SUPPLY AND A FULL SET OF INTERCONNECTING LEADS SHOULD BE
                                                         SUPPLIED

                                                         TO INTRODUCE THE STUDENTS TO THE BASIC PRINCIPLES OF ELECTRICAL
16.2 BASIC ELECTRICITY AND ELECTRONIC KIT                THEORY AND CIRCUITS AND THE PHYSICAL AND ELECTRICAL
                                                         CHARACTERISTICS OF COMMONLY USE SEMICONDUCTOR DEVICE AND
                                                         CIRCUITS , COMPREHANSIVE MANUALS SHOULD BE SUPPLIED

                                                         INCLUDING ALL THE NECESSORY COMPONENTS TO INTRODUCE COMMON
16.3 AMPLIFIERS AND ELECTRONIC CIRCUIT APPLICATION KIT   SEMICONDUCTOR AMPLIFIER CONFIGURATION , SHOW THEIR
                                                         CHARACTERISTICS & HENCE THEIR PARTICULAR USES IN CIRCUITRY , OPEN
                                                         BOARD TYPE KIT TO CONSTRUCT COMMON ELECTRONIC CIRCUITS.

                                                         THIS EQUIPMENT SHOULD BE USED IN CONJECTION WITH THE DECK TO
16.4 POWER SUPPLY TRAINING KIT                           PROVIDES A COURSE OF STUDY COVERING DC POWER SUPPLIES. THE
                                                         COMPREHENSIVE COURSEWARE COVERS FAMILIARSATION, THEORY ,
                                                         OBJECTIVE , PROCEDURE AND TYPICAL EXPERIMENTS RESULTS.

                                                         OPERATION AMPLIFIER TUTOR SHOULD BE COMPRISING WITH THREE IC OP -
16.5 OPERATIONAL AMPLIFIER TUTOR KIT                     AMPS, 1 DISCRETE AMPLIFIER , +10V SWITCH-ABLE SUPPLY , SCALING
                                                         POTENTIOMETER , ALL CONNECTING LEADS FRONT PANNEL MIMIC
                                                         DIAGRAM SHOWING ELEMENT AND CIRCUITS.




                                                         Page 29
                                                              POWER SUPPLY TO PROVIDE THE NECESSORY POWER REQUIRMENTS IN
                                                              ONE COMPACT UNIT SPACIFICALLY DESIGN FOR USE WITH ABOVE KIT WITH
                                                              FOLLOWING SPECS.
                                                              OUTPUT CAPABILITY
                                                              STABILZE 5V ±0.2V @ 1A MAX. , LOAD REGULATION TYPICALLY 0.15 %
16.5             AC /DC COMPREHANSIVE POWER SUPPLY            NOICE AND RIPPLES <10MV .
                                                              STABILIZE ±15V ±0.6V @ 0.3A EACH RAIL .
                                                              LOAD REGULATION TYPICALLY 0.1 %, NOICE AND RIPPLE < 10MV .
                                                              STABILIZE 0-20V @0.35A
                                                              LOAD REGULATION TYPICALLY 0.2%
                                                              NOISE AND RIPPLE TYPICALLY 5MV
          DIGITAL ELECTRONIC , MICROPROCESSOR AND MICRO-
       17 CONTROLLER
          COMPLETE SYSTEM COMPRISES:.
                                                              THE SYSTEM COMPRISE UNPOWERED CONSTRUCTION DECK , 1 SET OF 80
                                                              INTERCONNECTION LEADS COMPRISING AS 16 X 12 IN, 16 X 18, 16 X 5 IN, 32
                                                              X 3 IN LEADS EACH LENGTH A DIFFERENT COLOUR FOR EASY
                                                              IDENTIFICATION, 1 SET OF TTL MODULES AS FOLLOWS:
         ADVANCE LOGIC TRAINER
                                                              3-QUAD 2-INPUT NAND, 1-HEX INVERTER, 1-TRPLE 3-INPUT NAND, 3-DUAL 4-
                                                              INPUT NAND, 5 SINGLE LEVEL TRIGGERED JK FLIP-FLOP, 1-CARRIER WITH 14
                                                              PIN DIL SOCKET AND 1-EMPTY CARRIER COMPLETE WITH POWER
17.1                                                          SUPPLYFRONM AN EXTERNAL +5V SUPPLY AND TEACHING MANUAL.




  17.2 POWER SUPPLY FOR ABOVE ADVANCED LOGIC TRAINER
                                                          8086/8088 MICROPROCESSOR TRAINING SYSTEM with LCD display and
        8086/8088 MICROPROCESSOR TRAINING SYSTEM with LCD
17.3                                                      101ASCII keyboard M86-02 with complete PC system ( specification given
                              display
                                                          above)
                                                          Model No. 43214 , brand name TESCA, with complete PC. (specification
  17.4 8051 MICROCONTROLLER TRAINING SYSTEM               given above)
  17.5 PLC TRAINNER UNIVERSAL                             Model No. ED-UPLC , brand name ED Company limited


                                                             Page 30
       18 COMMUNICATION SYSTEM (ANALOGUE)

  18.1 FM COMMUNICATION TRAINER                           FM transmitter / Receiver Model No. 7503 , Brand name. BYTRONICS
  18.2 SATELITE COMMUNICATION TRAINER                     Model No. CST 7271, Brand name BYTRONICS
18.3     DSB/SSB AM TRANSMITTER TRAINER                   Model No. 7501, Brand name BYTRONICS

18.4     DSB/SSB AM RECEIVER TRAINER                      Model No. 7502, Brand name BYTRONICS


18.4     AUDIO INPUT MODULE                               Model No. 7408, Brand name BYTRONICS


18.5     AUDIO OUTPUT MODULE                              Model No. 7409, Brand name BYTRONICS

 19      COMMUNICATION SYSTEM (DIGITAL)
19.1     Modulation / Demodulation Trainer                PAM-PPM-PWM, Model # 7410 , Brand name BYTRONICS
19.2     SATELITE COMMUNICATION TRAINER                   Model No. SCT7271, Brand name BYTRONICS
 20      ELEMENTORY FIBRE OPTIC TRAINER                   Model NO. BFOT01, Brand name BYTRONICS
 21      Advance FIBRE OPTIC TRAINER                      Model NO.AFOT01, Brand name BYTRONICS
 22      MICRO STRIP ANTENNA TRAINER                      Model No. ATT7362, Brand name BYTRONICS
 23      ANTENNA TRAINER                                  Model No. ATS7261, Brand name BYTRONICS
 24      LOOSE COMPONENTS with complete Store fascility




                                                          Page 31

				
DOCUMENT INFO
Shared By:
Stats:
views:114
posted:10/11/2012
language:Latin
pages:31
Description: The Spreadsheet contain important information about the components required for design the lab.