Your Federal Quarterly Tax Payments are due April 15th Get Help Now >>

8424 mechanical appliances to disperse liquids by zCcBpI7

VIEWS: 6 PAGES: 17

									    8424    mech appl to disperse liq etc, sand etc blast mach
  842410    Fire Extinguishers
  842420    Spray Guns and Similar Appliances
  842430    Steam or Sand Blasting Machines and Similar Jet Projecting Machines
  842481    Mechanical Appliance for Spraying, Agricultural or Horticultural
  842489    Other Mechanical Appliance for Projecting, Dispersing or Spraying
  842490    Parts of Fire Extinguishers, Spray Guns and Sprayers


American Standards (Fire Extinguishers)

ANSI/NFPA 10-2002, Portable Fire
Extinguishers
Covers the selection, installation, inspection,
maintenance, and testing of portable
extinguishing equipment.

ANSI/NFPA 408-2004, Aircraft Hand Fire
Extinguishers
Covers fire safety requirements for the type,
capacity, rating, number, location, installation,
and maintenance of aircraft hand fire
extinguishers to be provided for the use of flight
crew members or other occupants of an aircraft
for the control of incipient fires in the areas of
aircraft that are accessible during flight.

UL 1093-2000, Standard for Safety for Fire
Extinguishers, Halogenated Agent
Covers the construction and performance,
exclusive of performance during fire tests, of
portable halon type fire extinguishers. Halon
type fire extinguishers are intended to be
utilized in accordance with American National
Standard for Portable Fire Extinguishers,
ANSI/NFPA 10-1998.

UL 154 CAN/ULC-S503-2005, Standard for
Safety for Carbon-Dioxide Fire
Extinguishers
10/19/04 bulletin contains an amended draft
binational standard for the Ninth Edition of
Carbon-dioxide Fire Extinguishers, ANSI/UL
154 and the Ninth Edition of CAN/ULC-S503.
Also covers comment resolution from the
February 11, 2004 draft standard.

UL 2129 CAN/ULC-S566-2005, Standard
for Safety for Halocarbon Clean Agent
Fire Extinguishers
10/19/04 bulletin contains an amended draft
binational standard for the Second Edition of
Halocarbon Clean Agent Fire Extinguishers,
ANSI/UL 2129 and the Second Edition of
CAN/ULC-S566. Also covers comment
resolution from the February 11, 2004 draft
standard.

UL 299/ULC-S504-2002, Standard for
Safety for Dry Chemical Fire
Extinguishers
These requirements cover the construction and
performance, exclusive of performance during
fire tests, of portable dry chemical type fire
extinguishers. Dry chemical fire extinguishers
are intended to be utilized in accordance with
the Standard for Portable Fire Extinguishers,
NFPA 10 and the National Fire Code of
Canada. The requirements for performance
during fire testing of dry chemical fire
extinguisher are specified in the Binational
standard for Rating and Fire testing of Fire
Extinguishers, UL 711/ULC-S508

UL 626 CAN/ULC-S507-2005, Standard for
Safety for Water Fire Extinguishers 5
10/19/04 bulletin contains an amended draft
binational standard for the Eighth Edition of
Water Fire Extinguishers, ANSI/UL 626 and the
Third Edition of CAN/ULC-S507. Also covers
comment resolution from the February 11,
2004 draft standard.

UL 711 CAN/ULC-S508-2004, Fire
Extinguishers, Rating and Fire Testing of
Includes proposed revisions to the heptane
specifications.

UL 8 CAN/ULC-S554-2005, Standard for
Safety for Foam Fire Extinguishers
10/19/04 bulletin contains an amended draft
binational standard for the Sixth Edition of
Water Based Agent Fire Extinguishers,
ANSI/UL 8 and the Third Edition of
CAN/ULC-S554. Also covers comment
resolution per the February 11, 2004 draft
standard.

UL 92-1999, Fire Extinguisher and Booster
Hose
Covers fire extinguisher and booster hose with
or without couplings attached, in sizes of 3/8
inch (9.5 mm) up to and including a nominal
internal diameter of 1-1/2 inches (38.1 mm) for
use on portable, wheeled, and stationary fire
extinguishers, and also as booster hose on fire
apparatus.
This hose is intended for use at maximum
working pressure of 200, 250, 400, 600, 800,
1000, or 1250 psig (1.38, 1.72, 2.76, 4.14,
5.52, 6.90, or 8.62 MPa).
These requirements also cover hose for use on
fire extinguishers requiring characteristics for
low-temperature flexibility at minus 54°C
(minus 65°F).

ANSI/NFPA 25-2002, Water-Based
Extinguishing Systems
Establishes the minimum requirements
necessary for the inspection, testing and
maintenance of water extinguishing systems.
These systems include sprinklers, standpipe
and hose, fire service piping and
appurtenances, fire pumps, water storage
tanks, fixed water spray, foam-water, and
valves. The document also addresses
impairment handling and reporting

ANSI/NFPA 33-2007, Standard for Spray
Application Using Flammable or
Combustible Materials
1.1.1 This standard shall apply to the spray
application of flammable or combustible
materials, as herein defined, either
continuously or intermittently, by any of the
following methods: (1) Compressed air
atomization (2) Airless or hydraulic atomization
(3) Electrostatic application methods (4) Other
means of atomized application 1.1.2 This
standard shall also apply to the application of
flammable or combustible materials, as herein
defined, either continuously or intermittently, by
any of the following methods: (1) Fluidized bed
application methods (2) Electrostatic fluidized
bed application methods (3) Other means of
fluidized application 1.1.3 This standard shall
also apply to spray application of water-borne,
water-based, and water-reducible materials
that contain flammable or combustible liquids
or that produce combustible deposits or
residues. 1.1.4* This standard shall not apply

UL 203-2005, Standard for Safety for Pipe
Hanger Equipment for Fire Protection
Service
These requirements cover the performance of
pipe hanger equipment for use in supporting
piping employed in sprinkler systems,
water-spray systems, and other piping systems
used for fire-protection service. Requirements
for the installation of pipe hangers and auxiliary
equipment are included in the Standard for the
Installation of Sprinkler Systems, NFPA 13, and
the Standard for Water-Spray Fixed Systems
for Fire Protection, NFPA 15.

UL 213-2004, Standard for Safety for
Rubber Gasketed Fittings for Fire
Protection Service
Covers rubber gasketed fittings intended for
assembling sections of pipe in fire protection
systems, for example, couplings to attach pipe
sections end to end, and side outlets to attach
pipe sections at right angles. The products
covered by this standard are intended for use
in fire protection service as outlined by the
following Standards of the National Fire
Protection Association: Installation of Sprinkler
Systems, ANSI/NFPA 13; Installation of
Standpipe, Private Hydrant, and Hose
Systems, ANSI/NFPA 14; Water Spray Fixed
Systems for Fire Protection, ANSI/NFPA 15;
Installation of Private Fire Service Mains and
Their Appurtenances, ANSI/NFPA 24.

UL 2351-2004, Standard for Safety for
Spray Nozzles for Fire-Protection Service
These requirements cover automatic and
non-automatic (open) type water spray nozzles
for installation in accordance with the Standard
for Installation of Sprinkler Systems, NFPA 13,
and the Standard for Water Spray Fixed
Systems for Fire Protection, NFPA 15.

UL 401-2004, Standard for Safety for
Portable Spray Hose Nozzles for
Fire-Protection Service (bulletin dated
February 16, 2004)
Covers portable spray hose nozzles intended
for use with fire department

UL 405-2004, Standard for Safety for Fire
Department Connections
Applies to fire department connections
intended for exterior installation on or for
buildings having standpipe and hose, water
spray, or sprinkler systems to enable a fire
department to connect hose lines directly to the
system to supplement existing water supplies.
Requirements for the installation and use of fire
department connections for fire protection
service are included in the following Standards
of the National Fire Protection Association.
NFPA 13, Installation of Sprinkler Systems;
NFPA 14, Standpipe and Hose Systems; NFPA
15, Water Spray Fixed Systems; NFPA 24,
Installation of Private Fire Service Mains.

International Standards

ISO 1021:1980
Aircraft - Engine nacelle fire extinguisher apertures and
Doors

ISO 11601:1999
Wheeled fire extinguishers - Performance and
construction

ISO 11602-1:2000
Fire protection - Portable and wheeled fire extinguishers
- Part 1: Selection and installation


ISO 11602-2:2000
Fire protection - Portable and wheeled fire extinguishers
- Part 2: Inspection and maintenance

ISO 7165:1999
Fire fighting - Portable fire extinguishers - Performance
and construction

ISO 6183:1990
Fire protection equipment - Carbon dioxide extinguishing
systems for use on premises - Design and installation


ISO 7202:1987
Fire protection - Fire extinguishing media - Powder

ISO 7203-1:1995
Fire extinguishing media - Foam concentrates - Part 1:
Specification for low expansion foam concentrates for
top application to water-immiscible liquids

ISO 7203-2:1995
Fire extinguishing media - Foam concentrates - Part 2:
Specification for medium and high expansion foam
concentrates for top application to water-immiscible
liquids


ISO 7203-3:1999
Fire extinguishing media - Foam concentrates - Part 3:
Specification for low expansion foam concentrates for
top application to water-miscible liquids

ISO 14520-10:2005

Gaseous fire-extinguishing systems - Physical properties
and system design - Part 10: HFC 23 extinguishant

ISO 14520-10:2005

Gaseous fire-extinguishing systems - Physical properties
and system design - Part 10: HFC 23 extinguishant
ISO 14520-11:2005
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 11: HFC 236fa extinguishant

ISO 14520-12:2005
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 12: IG-01 extinguishant

ISO 14520-13:2005
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 13: IG-100 extinguishant

ISO 14520-14:2005
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 14: IG-55 extinguishant


ISO 14520-15:2005
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 15: IG-541 extinguishant

ISO 14520-1:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 1: General requirements

ISO 14520-2:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 2: CF3I extinguishant

ISO 14520-5:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 5: FK-5-1-12 extinguishant

ISO 14520-6:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 6: HCFC Blend A
extinguishant

ISO 14520-8:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 8: HFC 125 extinguishant

ISO 14520-9:2006
Gaseous fire-extinguishing systems - Physical properties
and system design - Part 9: HFC 227ea extinguishant
ISO 5923:1989
Fire protection - Fire extinguishing media - Carbon
dioxide

ISO 7201-1:1989
Fire protection - Fire extinguishing media - Halogenated
hydrocarbons - Part 1: Specifications for halon 1211 and
halon 1301

ISO 7201-2:1991
Fire extinguishing media - Halogenated hydrocarbons -
Part 2: Code of practice for safe handling and transfer
procedures of halon 1211 and halon 1301


ISO/TS 20885:2003
Gaseous media fire-extinguishing systems - Area
coverage fire test procedure - Engineered and
pre-engineered extinguishing units

ISO 15371:2000
Ships and marine technology - Fire-extinguishing
systems for protection of galley deep-fat cooking
equipment - Fire tests

Indian Standards

IS 2171 :    Specification for portable fire extinguishers,dry powder
                                                                                Active
1999         (cartridge type)
IS 2190 :    Selection, Installation and Maintenance of First-aid Fire
                                                                                Active
1992         Extinguishers - Code of Practice
IS 4562 :    Shipbuilding - Portable Chemical Fire Extinguishers, Foam
                                                                                Withdarwn
1997         Type for Marine Use - Specification
IS 4862 :
             Specification for portable fire extinguishers for aircraft : Part 1
Part 1 :                                                                         Active
             Halon 1211 Type
1986
IS 4947 :
             Specification for gas cartridges for use in fire extinguishers     Active
1985
IS 5490 :    Specification for refills for portable fire extinguishers and
Part 1 :     chemical fire engines: Part 1 For soda acid portable fire          Withdarwn
1977         extinguishers
IS 5490 :    Specification for Refills for Portable Fire Extinguishers and
                                                                                Withdarwn
Part 2 :     Chemical Fire Engines - Part II : For Foam Type Portable Fire
1977         Extinguisher
IS 5490 :    Specification for Refills for Portable Fire Extinguishers and
Part 3 :     Chemical Fire Engines - Part III : For Soda Acid Chemical Fire Withdarwn
1979         Engines, 50 Litre Capacity
IS 5490 :    Specification for Refills for Portable Fire Extinguishers and
Part 4 :     Chemical Fire Engines - Part IV : For Foam Chemical Fire        Withdarwn
1979         Engines, 50 Litre Capacity
IS 6234 :    Portable Fire Extinguishers Water Type (Stored Pressure) -
                                                                             Active
2003         Specification
IS 8149 :    Functional requirements for twin co2 fire extinguishers (trolley
                                                                              Active
1994         mounted)
IS 11108 :   Specification for Portable Fire Extinguishers - Halon 1211
                                                                             Active
1984         Type


American Standards (appliances for spraying)

ANSI/ASAE S436.1-OCT97 (RMAR01),
Test Procedure for Determining the
Uniformity of Water Distribution of Center
Pivot, Corner Pivot, and Moving Lateral
Irrigation Machines Equipped with Spray
or Sprinkler Nozzles

ANSI/ASHRAE 62t-2002, Ventilation for
Acceptable Indoor Air Quality
Replaces section 5.11. In so doing, it clarifies
and codifies requirements for drain pan design,
carryover from cooling coils, access for
inspection and cleaning, and requirements
related to the proper application of humidifiers
and water spray devices within the air
distribution system. Recognizing that liquid
water within the air distribution system
increases the likelihood of microbial growth, the
requirements in this addendum seek to prevent
standing water in drain pans, limit water droplet
carryover, and minimize stagnant water in
humidifier and water spray sumps.

ASME A112.4.2-2003, Water Closet
Personnel Hygiene Devices
This Standard establishes general and
performance requirements, test methods and
marking requirements for bidet sprays and
other optional features as applied to water
closets, water closet seats and other retrofit
devices. Products covered by this standard are
intended to be supplied with cold water only.

AWS C2.16-2002, Guide for Thermal Spray
Operator Qualification
This guide contains recommendations for
thermal-spray-operator qualification based on
knowledge and skill testing. Twelve individual
thermal-spray operator qualification tests
(TSOQT) are included for engineering and
corrosion control applications: one each for job
knowledge, high velocity oxygen fuel (HVOF)
spraying and flame spray-fusing, two for arc
spraying, and three each for flame spraying
and air-plasma spraying.

AWS C2.21M/C2.21-2003, Specification for
Thermal Spray Equipment Acceptance
Inspection
This document specifies the thermal spray
equipment acceptance requirements for
plasma, arc-wire, flame-powder, -wire, -rod,
and -cord, high velocity oxygen fuel (HVOF)
equipment. Proof of suitability shall be
provided by the equipment supplier,.
Inspection reports are provided in five
mandatory annexes.

AWS C2.23/C2.23M-2003, Specification for
the Application of Thermal Spray
Coatings (Metallizing) of Aluminum, Zinc,
and Their Alloys and Composites for the
Corrosion Protection of Steel
Presents an industrial process for the
application of thermal spray coating (TSC) on
steel. It covers safety, job reference standards,
equipment setup and preparation, surface
preparation, Aluminum and Zinc Application
and Sealer and Topcoat Application.

ANSI/NFPA 15-2007, Standard for Water
Spray Fixed Systems for Fire Protection
1.1.1 This standard provides the minimum
requirements for the design, installation, and
system acceptance testing of water spray fixed
systems for fire protection service and the
minimum requirements for the periodic testing
and maintenance of ultra high-speed water
spray fixed systems. 1.1.2* Water spray fixed
systems shall be specifically designed to
provide for effective fire control,
extinguishment, prevention, or exposure
protection. 1.1.3* This standard shall not apply
to water spray protection from portable nozzles,
sprinkler systems, monitor nozzles, water mist
suppression systems, explosion suppression,
or other means of application covered by other
standards of NFPA.

ANSI/NFPA 16-2003, Insallation Of Deluge
Foam–Water Sprinkler and Foam-Water
Spray Systems
Covers minimum requirements for the design,
installation and maintenance of deluge water
sprinkler systems.

ANSI/NFPA 24-2007, Standard for the
Installation of Private Fire Service Mains
and Their Appurtenances
1.1.1 This standard shall cover the minimum
requirements for the installation of private fire
service mains and their appurtenances
supplying the following: (1) Automatic sprinkler
systems (2) Open sprinkler systems (3) Water
spray fixed systems (4) Foam systems (5)
Private hydrants (6) Monitor nozzles or
standpipe systems with reference to water
supplies (7) Private hydrants (8) Hose
houses1.1.2 This standard shall apply to
combined service mains used to carry water for
fire service and other uses.

ANSI/NFPA 25-2002, Water-Based
Extinguishing Systems
Establishes the minimum requirements
necessary for the inspection, testing and
maintenance of water extinguishing systems.
These systems include sprinklers, standpipe
and hose, fire service piping and
appurtenances, fire pumps, water storage
tanks, fixed water spray, foam-water, and
valves. The document also addresses
impairment handling and reporting

International Standards

ISO 14231:2000
Thermal spraying - Acceptance inspection of thermal
spraying equipment

ISO 14917:1999
Thermal spraying - Terminology, classification

ISO 14918:1998
Thermal spraying - Approval testing of thermal sprayers

ISO 14919:2001
Thermal spraying - Wires, rods and cords for flame and
arc spraying - Classification - Technical supply
conditions

ISO 14920:1999
Thermal spraying - Spraying and fusing of self-fluxing
alloys

ISO 17836:2004
Thermal spraying - Determination of the deposition
efficiency for thermal spraying

ISO 15643:2002
Road construction and maintenance equipment -
Bituminous binder spreaders/sprayers - Terminology
and commercial specifications

ISO 21592:2006
Building construction machinery and equipment -
Concrete spraying machines - Terminology and
commercial specifications

ISO 6720:1989
Agricultural machinery - Equipment for sowing, planting,
distributing fertilizers and spraying - Recommended
working widths

ISO 11545:2001
Agricultural irrigation equipment - Centre-pivot and
moving lateral irrigation machines with sprayer or
sprinkler nozzles - Determination of uniformity of water
distribution

ISO 8026:1995
Agricultural irrigation equipment - Sprayers - General
requirements and test methods

ISO 10625:2005
Equipment for crop protection - Sprayer nozzles - Colour
coding for identification

ISO 10626:1991
Equipment for crop protection - Sprayers - Connecting
dimensions for nozzles with bayonet fixing

ISO 10627-1:1992
Agricultural sprayers - Data sheet - Part 1: Typical layout

ISO 10627-2:1996
Hydraulic agricultural sprayers - Data sheets - Part 2:
Technical specifications related to components

ISO 13440:1996
Equipment for crop protection - Agricultural sprayers -
Determination of the volume of total residual

ISO 13441-1:1997
Air-assisted agricultural sprayers - Data sheets - Part 1:
Typical layout

ISO 13441-2:1997
Air-assisted agricultural sprayers - Data sheets - Part 2:
Technical specifications related to components

ISO 14131:2005
Agricultural sprayers - Boom steadiness - Test methods

ISO 14710:1996
Equipment for crop protection - Air-assisted sprayers -
Dimensions of nozzle swivel nuts

ISO 19932-1:2006
Equipment for crop protection - Knapsack sprayers -
Part 1: Requirements and test methods
ISO 19932-2:2006
Equipment for crop protection - Knapsack sprayers -
Part 2: Performance limits

ISO 22368-1:2004
Crop protection equipment - Test methods for the
evaluation of cleaning systems - Part 1: Internal cleaning
of complete sprayers

ISO 22368-2:2004
Crop protection equipment - Test methods for the
evaluation of cleaning systems - Part 2: External
cleaning of sprayers

ISO 22369-1:2006
Crop protection equipment - Drift classification of
spraying equipment - Part 1: Classes

ISO 22763:2006
Equipment for crop protection - Sprayers -
Demonstration track for field crop sprayers

ISO 22866:2005
Equipment for crop protection - Methods for field
measurement of spray drift

ISO 4102:1984
Equipment for crop protection - Sprayers - Connection
threading

ISO 5682-1:1996
Equipment for crop protection - Spraying equipment -
Part 1: Test methods for sprayer nozzles

ISO 5682-2:1997
Equipment for crop protection - Spraying equipment -
Part 2: Test methods for hydraulic sprayers

ISO 5682-3:1996
Equipment for crop protection - Spraying equipment -
Part 3: Test method for volume/hectare adjustment
systems of agricultural hydraulic pressure sprayers

ISO 8169:1984
Equipment for crop protection - Sprayers - Connecting
dimensions for nozzles and manometers

ISO 9357:1990
Equipment for crop protection - Agricultural sprayers -
Tank nominal volume and filling hole diameter

ISO 9898:2000
Equipment for crop protection - Test methods for
air-assisted sprayers for bush and tree crops

ISO 15029-1:1999
Petroleum and related products - Determination of spray
ignition characteristics of fire-resistant fluids - Part 1:
Spray flame persistence - Hollow-cone nozzle method

ISO 22958:2005
Textiles - Water resistance - Rain tests: exposure to a
horizontal water spray

ISO 8028:1999
Rubber and/or plastics hoses and hose assemblies for
airless paint spraying - Specification

IEC 60745-2-7 Ed. 1.0 b:1989
Safety of hand-held motor-operated electric tools.
Part 2: Particular requirements for spray guns for
non-flammable liquids
Applies to spray guns used for spraying non-flammable liquids
which incorporate the motor in the hand-held unit.

IEC 61214 Ed. 1.0 b:1993
Hand-held mains voltage operated spray guns -
Performance requirements
Defines the principal performance characteristics of hand-held
mains electric motor-operated spray guns with integral
containers and motors. Describes the standard methods for
measuring these characteristics.
Indian Standards

IS 112 :
           Paints tinted to various colour, exterior, undercoating, spraying     Withdarwn
1950
IS 114 :   Paint, interior, undercoating, spraying to No. 101 sky blue, No.
                                                                                 Withdarwn
1950       216 eau-de-nil
IS 116 :   Paint, exterior, undercoating, spraying, matt finish to No. 352 pale
                                                                                Withdarwn
1950       cream and No. 632 dark admiralty grey
           Ready mixed paint, spraying, finishing for railway wagon stock, to
IS 130 :
           Indian Standard Colours No. 446 red oxide and red oxide (colour Withdarwn
1964
           unspecified) (Revised)
IS 131 :   Ready mixed paint, spraying, finishing for railway under-frames,
                                                                                 Withdarwn
1965       black (Revised)
IS 132 :   Ready mixed paint, spraying, exterior, oil gloss, for general
                                                                                 Withdarwn
1950       purposes, to Indian Standard colours
IS 134 :   Enamel, spraying, interior: (1) undercoating, (2) finishing, colour
                                                                                 Withdarwn
1950       as required
IS 135 :   Ready mixed paint, spraying, stoving, red oxide-zinc chrome,
                                                                                 Withdarwn
1952       priming
           Ready mixed paint, spraying, petrol resisting, air drying, for
IS 141 :
           exterior painting of containers, colours as required (incorporated in Withdarwn
1950
           IS 140)
IS 143 :   Ready mixed paint, spraying, petrol resisting, stoving, for exterior
                                                                                Withdarwn
1950       painting of containers, colour as required
IS 149 :   Ready mixed paint, spraying, undercoating, stoving, for enamels
                                                                                 Withdarwn
1950       and general purposes colour as required
IS 151 :   Ready mixed paint, spraying, finishing, stoving, enamel, for
                                                                                 Active
1985       general purposes, colour as required
IS 153 :   Ready mixed paint, spraying stoving, lead-free, for general
                                                                                 Withdarwn
1950       purposes, colour as required
IS 160 :
           Acid resisting paint, spraying                                        Withdarwn
1950
IS 166 :
           Aluminium paint, spraying for general purposes, in dual container Withdarwn
1950
           Ready mixed paint, spraying, quick drying, matt, lead-free, for
IS 169 :
           general purposes to Indian Standard colours (amalgamated in IS        Withdarwn
1950
           168)
IS 521 :   Enamel, spraying, exterior, type 1 (synthetic), (1) undercoating, (2)
                                                                                 Withdarwn
1954       finishing, colour as required (tentative)
IS 523 :   Enamel, spraying, exterior, type 2, (1) undercoating, (2) finishing, Withdarwn
1954      colour as required (tentative)
IS 1677 :
          Rubber Hoses for Agricultural Spraying                           Active
2005
IS 3023 :
          Recommended practice for building up by metal spraying           Active
1965
IS 4198 :
          Specification for emulsion spraying machine for roads            Withdarwn
1967
IS 6159 : Recommended Practice for Design and Fabrication of Iron and
                                                                           Active
1998      Steel Products Prior to Galvanizing and Metal Spraying
IS 6586 : Recommended practice for metal spraying for protection of iron
                                                                           Active
1989      steel

								
To top