Gardner Denver by 4mD4ar

VIEWS: 48 PAGES: 43

									                                                                                     Photo # Photo Series
Category Qty         Description (Make, Model, SN)          Ref #     Manufacturer                          Value
                                                                                       1
Material    4   Enpac Corp, Poly Dollly P/N 5300YE, 55              Enpac Corp         1     1 thru 3




Handling        gallon drum dolly / containment reservoir
Material    4   Enpac Corp, Poly Dollly P/N 5300YE, 55              Enpac Corp         2




Handling        gallon drum dolly / containment reservoir
Material    4   Enpac Corp, Poly Dollly P/N 5300YE, 55              Enpac Corp         3




Handling        gallon drum dolly / containment reservoir
Storage     33 Sections of 36" wide X 10' tall X 18"                                   4    4 5hru 5
                deep metal shelving with 13 to 16
                shelves per section. Shelving units are
                add-on units in 11) groups of 3) sections
                each for a total of 33 sections.
Storage     33 Sections of 36" wide X 10' tall X 18"                                   5
                deep metal shelving with 13 to 16
                shelves per section. Shelving units are
                add-on units in 11) groups of 3) sections
                each for a total of 33 sections.
Storage    1,50 More than 1,500) blue plastic bin front                                6    6 thru 7

                totes 13" & 17" front to back, 8" to 10"

           0 + wide X 6" to 7" tall.
Storage    1,50 More than 1,500) blue plastic bin front                                7

                totes 13" & 17" front to back, 8" to 10"

           0 + wide X 6" to 7" tall.
                                                                                     Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                       1
Stamper    3   Schmidt M/N 6, S/N 28027, manual                     Schmidt            8
               bench model stamping machine with
               number and letter wheel with indexing
               table
Material   1   Abell-Howe S/N 63 346 2, 1-ton                J7     Abell-Howe         9
               Structural I-beam mounted jib with
               Budgit 1-ton chain hoist, block and
               pendant control. 15' jib arm with swivel
Handling       tie rods and 10' height from floor to hook
Material   1   Full round column mounted 2-ton               J5                        10
               capacity jib crane with 360⁰ rotation,
               Dayton 2-ton chain hoist with block and
               pendant control. 15' jib arm with 10' foor
Handling       to hook height              ⁰
Material   1   Full round column mounted 2-ton               J9                        11
               capacity jib crane with 360 rotation, P &
               H 2-ton chain hoist with block and
               pendant control. 15' jib arm with 10' foor
Handling       to hook height              ⁰
Material   1   Full round column mounted 2-ton              J10                        12
               capacity jib crane with 360 rotation, P &
               H 2-ton chain hoist with block and
               pendant control. 15' jib arm with 10' foor
Handling       to hook height
Material   1   Reliable S/N 22651-J6A full round            J11     Reliable           13
               column mounted jib crane with 360⁰
               rotation with P & H 2-ton cable hoist with
               block and pendant control, 9' arm and
Handling       8'6" height floor to hook
Material   1   Abell-Howe 1-ton S/N MC-7787751,             J12     Abell-Howe         14
               structural I-beam mounted jib with 15'
               arm, tie rods with 1/2-ton Chicago
               Pneumatic air hoist,15' arm and 10'
Handling       height floor to hook
                                                                                         Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                              Value
                                                                                            1
Material   1   Structural I-beam mounted 1-ton jub with     J15                            15
               15' arm, swivel tie rods, with Yale 1-ton
               chain hoist, block and pendant control
Handling       with 10' height floor to hook
Material   1   Reliable S/N 22651-J6B, 2-ton full round     J14     Reliable               16
               column mounted jib crane with 360⁰
               rotation with P & H 2-ton cable hoist,
               block and pendant control, 15' arm and
Handling       9'6" height floor to hook
Material   1   Industrial Crane and Equipment Co 2-          J3     Industrial Crane &     17
               ton, full round column mounted jib crane
               with 360⁰ rotation and with a Coffing 1-
               ton chain hoist with 1-ton block and
               pendant control, 15' arm and 10' height
Handling       floor to hook                                        Equipment CO
Material   1   Double trunion, Structural I-beam             J2                            18
               mounted jib, 1-ton capacity with Coffing
               1-ton chain hoist, block and pendant
Handling       control, 12' arm, 10' height floor to hook
Material   1   Abell-Howe S/N MC71-B2699 structural          J1     Abell-Howe             19
               I-beam mounted jib with 18' arm, Coffing
               1-Ton chain hoist, block and pendant
Handling       control with 10' height, floor to hook
Material   1   Abell-Howe structural I-beam mounted          J8     Abell-Howe             20
               jib with 18' arm, Coffing 1-ton chain
               hoist, block and pendant control, 10'
Handling       height, floor to hook
Material   1   Reliable Crane S/N 22651-J6, 2-ton full       J6     Reliable               21
               round column mounted jib crane with
               360⁰, 15' arm, Coffing 2-Ton chain hoist,
               block and pendant control, 10' height
Handling       floor to hook
                                                                                    Photo # Photo Series
Category Qty       Description (Make, Model, SN)           Ref #     Manufacturer                          Value
                                                                                       1
 Press     1   Famco M/N 25C arbor press on floor                  Famco              22




               stand
 Press     1   OTC Roll-Bed P/N 210324, S/N 1021,                  OTC                23   23 thru 24
               80/100-ton capacity H-Frame hydraulic
               press, 50 1/2" between uprights with roll
               out table that is 36" wide X 24" front to
               back and 1 1/2" thick
 Press     1   OTC Roll-Bed P/N 210324, S/N 1021,                                     24
               80/100-ton capacity H-Frame hydraulic
               press, 50 1/2" between uprights with roll
               out table that is 36" wide X 24" front to
               back and 1 1/2" thick
 Press     1   Greenerd M/N 5, floor model arbor press             Greenerd           25   25 thru 26




 Press     1   Greenerd M/N 5, floor model arbor press             Greenerd           26




Material   Lot Rack with parts bins                                                   27




Handling
 Parts     3   Drum mounted parts washing stations                                    28




Washers
                                                                                  Photo # Photo Series
Category Qty       Description (Make, Model, SN)         Ref #     Manufacturer                          Value
                                                                                     1
Material   3   Trunion positioning fixtures                                         29




Handling
 Press     1   Greenerd M/N 4, floor model arbor press                              30




 Work      Lot Good quantity of metal work benches,                                 31




Benches        some with bench vises
 Motor     1   Marathon 150 HP motor with frame,                                    32   32 thru 33

               control cabinet, air receiver tank and

               piping
 Motor     1   Marathon 150 HP motor with frame,                                    33

               control cabinet, air receiver tank and

               piping
  Air      1   Gardner Denver Electra-Screw M/N                  Gardner-Denver     34   34 thru 35

Compres        EDEQJA, S/N M52068, 50 HP rotary

  sor          screw air compressor
  Air      1   Gardner Denver Electra-Screw M/N                  Gardner-Denver     35

Compres        EDEQJA, S/N M52068, 50 HP rotary

  sor          screw air compressor
                                                                                    Photo # Photo Series
Category Qty         Description (Make, Model, SN)         Ref #     Manufacturer                          Value
                                                                                       1
Air Dryer   1    Gardner Denver RDS Series, M/N                    Gardner-Denver     36

                 RDS250A-4, S/N 133-03-29-1999-5348,

                 refrigerated air dryer
 Press      1    OTC 10-ton H-Frame press with 21"                 OTC                37   37 thru 38




                 between uprights
 Press      1    OTC 10-ton H-Frame press with 21"                 OTC                38




                 between uprights
Storage     6    Justrite flammable storage cabinets               Justrite           39   39 & 43 thru




Cabinets                                                                                   44
Lumber      Lot Assorted lumber for building pallets for                              40   40 thru 41




                shipping
Lumber      Lot Assorted lumber for building pallets for                              41




                 shipping
  Saw       1    DeWalt M/N DW705, 12" compound                    DeWalt             42




                 miter saw with DeWalt Stand
                                                                                     Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                        1
Storage    6   Justrite flammable storage cabinets                  Justrite           43




Cabinets
Storage    6   Justrite flammable storage cabinets                  Justrite           44




Cabinets
Storage    Lot Assorted storage cabinets and tool                                      45




Cabinets       cabinets
 Press     1   OTC P/N 210324, S/N 1075, 80/100-ton                 OTC                46

               rool-bed H-frame press with 50 1/2"

               between uprights and with a roll out table
 Press     1   Famco M/N 5R floor model arbor press                 Famco              47




 Press     1   Enerpac 80-ton H-frame press with 35"                Enerpac            48

               between uprights with an Enerpac 1 1/2

               HP M/N PER-3042A power source
 Lathe     1   Southbend M/N SBL530, 22" swing X                    South Bend         49   49 thru 51
               84"cc, gap bed engine lathe, S/N 17669,
               with 12" 3/6-jaw chuck, 15" 4-jaw chuck,
               steady rest, D2-8 Camlock spindle nose,
               tail stock with #6 MT, quick change tool
               post with tool holders, Trav-a-dial
                                                                                     Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                        1
 Lathe    1    Southbend M/N SBL530, 22" swing X                    South Bend         50
               84"cc, gap bed engine lathe, S/N 17669,
               with 12" 3/6-jaw chuck, 15" 4-jaw chuck,
               steady rest, D2-8 Camlock spindle nose,
               tail stock with #6 MT, quick change tool
               post with tool holders, Trav-a-dial
 Lathe    1    Southbend M/N SBL530, 22" swing X                    South Bend         51
               84"cc, gap bed engine lathe, S/N 17669,
               with 12" 3/6-jaw chuck, 15" 4-jaw chuck,
               steady rest, D2-8 Camlock spindle nose,
               tail stock with #6 MT, quick change tool
               post with tool holders, Trav-a-dial
  Mill    1    Kent M/N KTM-3VK, S/N 345146,                        Kent               52   52 thru 53
               vertical milling machine with 3 HP
               variable speed head, 60 to 4200 RPM,
               50" table, R-8 spindle nose, R-8 collets &
               Mitutoyo 2-axis DRO with way lube pump
  Mill    1    Kent M/N KTM-3VK, S/N 345146,                        Kent               53
               vertical milling machine with 3 HP
               variable speed head, 60 to 4200 RPM,
               50" table, R-8 spindle nose, R-8 collets &
               Mitutoyo 2-axis DRO with way lube pump
Grinder   1    Blanchard M/N 18, S/N 9665, rotary                   Blanchard          54
               surface grinder with 42" diameter
               magnetic chuck, drive motor, coolant
               and hydraulic feed system
Grinder   1    Blanchard M/N 18, S/N 9665, rotary                   Blanchard          55
               surface grinder with 42" diameter
               magnetic chuck, drive motor, coolant
               and hydraulic feed system
Grinder   1    Blanchard M/N 18, S/N 9665, rotary                   Blanchard          56
               surface grinder with 42" diameter
               magnetic chuck, drive motor, coolant
               and hydraulic feed system
                                                                                    Photo # Photo Series
Category Qty       Description (Make, Model, SN)           Ref #     Manufacturer                          Value
                                                                                       1
Grinder   1    Blanchard M/N 18, S/N 9665, rotary                  Blanchard          57    54 thru 57
               surface grinder with 42" diameter
               magnetic chuck, drive motor, coolant
              and hydraulic feed system
 Dump     Lot Quantity of 1 1/2 cubic yard dump                                       58




Hoppers        hoppers throughout facility
 Lathe    1    LeBlond M/N Heavy Duty 3220-28, 41"                 LeBlond            59   59 thru 61
               swing X 116"cc engine lathe with tail
               stock, steady rest, 4-position tool post,
               10 to 1300 RPM, 24" diameter 4-jaw
               chuck, 30 HP drive motor, 2 1/8"
               diameter hole through spindle
 Lathe    1    LeBlond M/N Heavy Duty 3220-28, 41"                 LeBlond            60
               swing X 116"cc engine lathe with tail
               stock, steady rest, 4-position tool post,
               10 to 1300 RPM, 24" diameter 4-jaw
               chuck, 30 HP drive motor, 2 1/8"
               diameter hole through spindle
 Lathe    1    LeBlond M/N Heavy Duty 3220-28, 41"                 LeBlond            61
               swing X 116"cc engine lathe with tail
               stock, steady rest, 4-position tool post,
               10 to 1300 RPM, 24" diameter 4-jaw
               chuck, 30 HP drive motor, 2 1/8"
               diameter hole through spindle
  Mill    1    Microcut M/N 5000VS, S/N 590706                     Microcut           62   62 thru 65
               vertical milling machine with #30 spindle
               taper, 5 HP drive motor, 12" X 60" table
               with power feed, power feed on knee,
               Accurite 2-axis DRO, with #30 taper tool
               holders, power draw bar, way lube pump,
  Mill    1    Microcut M/N 5000VS, S/N 590706                     Microcut           63
               vertical milling machine with #30 spindle
               taper, 5 HP drive motor, 12" X 60" table
               with power feed, power feed on knee,
               Accurite 2-axis DRO, with #30 taper tool
               holders, power draw bar, way lube pump,
                                                                                          Photo # Photo Series
Category Qty       Description (Make, Model, SN)             Ref #     Manufacturer                              Value
                                                                                             1
  Mill    1    Microcut M/N 5000VS, S/N 590706                       Microcut               64
               vertical milling machine with #30 spindle
               taper, 5 HP drive motor, 12" X 60" table
               with power feed, power feed on knee,
               Accurite 2-axis DRO, with #30 taper tool
               holders, power draw bar, way lube pump,
  Mill    1    Microcut M/N 5000VS, S/N 590706                       Microcut               65
               vertical milling machine with #30 spindle
               taper, 5 HP drive motor, 12" X 60" table
               with power feed, power feed on knee,
               Accurite 2-axis DRO, with #30 taper tool
               holders, power draw bar, way lube pump,
 Paint    1    Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington     66   66 thru 72
               tall, filtered and lighted paint booth with
               Harrington 5-ton monorail hoist with 14'
               of rail supported by 3) 12" X 12" square
               columns. Includes power trolly, electric
 Booth         bus, block and pendant control. Booth is
 Paint    1    Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington     67
               tall, filtered and lighted paint booth with
               Harrington 5-ton monorail hoist with 14'
               of rail supported by 3) 12" X 12" square
               columns. Includes power trolly, electric
 Booth         bus, block and pendant control. Booth is
 Paint    1    Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington     68
               tall, filtered and lighted paint booth with
               Harrington 5-ton monorail hoist with 14'
               of rail supported by 3) 12" X 12" square
               columns. Includes power trolly, electric
 Booth         bus, block and pendant control. Booth is
 Paint    1    Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington     69
               tall, filtered and lighted paint booth with
               Harrington 5-ton monorail hoist with 14'
               of rail supported by 3) 12" X 12" square
               columns. Includes power trolly, electric
 Booth         bus, block and pendant control. Booth is
 Paint    1    Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington     70
               tall, filtered and lighted paint booth with
               Harrington 5-ton monorail hoist with 14'
               of rail supported by 3) 12" X 12" square
               columns. Includes power trolly, electric
 Booth         bus, block and pendant control. Booth is
                                                                                         Photo # Photo Series
Category Qty         Description (Make, Model, SN)            Ref #     Manufacturer                            Value
                                                                                            1
  Paint     1   Binks 20' wide X 7'4" front to back X 10'             Binks / Harrington   71
                tall, filtered and lighted paint booth with
                Harrington 5-ton monorail hoist with 14'
                of rail supported by 3) 12" X 12" square
                columns. Includes power trolly, electric
 Booth          bus, block and pendant control. Booth is
 Paint       1 Binks 20' wide X 7'4" front to back X 10'              Binks / Harrington   72
                tall, filtered and lighted paint booth with
                Harrington 5-ton monorail hoist with 14'
                of rail supported by 3) 12" X 12" square
                columns. Includes power trolly, electric
 Booth          bus, block and pendant control. Booth is
 Sound      Lot Approximately 800 square feet of sound                                     73   73 thru 74
                 deading foam with accompanying wall
                 channels for mounting foam (in "hot-
Material        room")
Sound       Lot Approximately 800 square feet of sound                                     74
                 deading foam with accompanying wall
                 channels for mounting foam (in "hot-
 Material        room")
Bridgecra   1    Hurricrane 2-ton bridgecrane with 18'                Hurricrane           75   75 thru 77
                 span and 20' of dual rail with powered
                 bus and powered bridge. Includes 2-ton
                 Coffing chain hoist, block and pendant
    ne           control. 14'6" height floor to hook
Bridgecra   1    Hurricrane 2-ton bridgecrane with 18'                Hurricrane           76
                 span and 20' of dual rail with powered
                 bus and powered bridge. Includes 2-ton
                 Coffing chain hoist, block and pendant
    ne           control. 14'6" height floor to hook
Bridgecra   1    Hurricrane 2-ton bridgecrane with 18'                Hurricrane           77
                 span and 20' of dual rail with powered
                 bus and powered bridge. Includes 2-ton
                 Coffing chain hoist, block and pendant
   ne            control. 14'6" height floor to hook
                                                                                      Photo # Photo Series
Category Qty        Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                         1
Bridgecra   1   Crane America Services 5-ton self                    Crane America      78    78 thru 84
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      79
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      80
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      81
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      82
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      83
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
    ne          hook. Crane super structure is
Bridgecra   1   Crane America Services 5-ton self                    Crane America      84
                contained bridgecrane with 30' span, 58'
                of dual rail, powered bus and powered
                trolly, 5-ton Demag cable hoist with block
                and pendant control, 15' height floor to
   ne           hook. Crane super structure is
                                                                                        Photo # Photo Series
Category Qty       Description (Make, Model, SN)               Ref #     Manufacturer                          Value
                                                                                           1
 Engine   1    Kent Moore M/N J29109, Heavy duty                       Kent Moore         85    85 thru 86

               engine hoist with hydraulic jack and

 Stand         worm gear rotation
 Engine   1    Kent Moore M/N J29109, Heavy duty                       Kent Moore         86

               engine hoist with hydraulic jack and

 Stand         worm gear rotation
  Saw     1    Grizzly 6" X 10" horizontal band saw with               Grizzly            87   87 thru 88




               3/4" wide blade and coolant
  Saw     1    Grizzly 6" X 10" horizontal band saw with               Grizzly            88




               3/4" wide blade and coolant
  Belt    1    Baldor 4" wide pedestal belt sander                     Baldor             89




Sander
Grinder   1    Dayton M/N 4Z909E 8" double end                         Dayton             90




               pedestal grinder
  Saw     1    Wilton 4" X 10" horizontal / vertical roll-in           Wilton             91   91 thru 92




               band saw with 1/2" wide blade
                                                                                      Photo # Photo Series
Category Qty        Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                         1
                                                                                        92




  Drill    1    Enco M/N 126-2650, S/N 186056C, 20"                                     93

                floor model drill press with reversing

 Press          spindle, 300 to 2000 RPM with vise
  Drill    1    Milwaukee M/N 4262-1, S/N 502-26181,                 Milwaukee          94

                magnetic base drill with a 3/16" to 3/4"

 Press          drill chuck
Welding    1    48" X 54" welding table with 4 1/2" vise                                95




 Table
 Press     1    Dake M/N 1 arbor press on metal floor                Dake               96




               stand
Material   Lot Metal shelving with plastic bin-front totes                              97   97 thru 98




Handling
Material   Lot Metal shelving with plastic bin-front totes                              98




Handling
                                                                                   Photo # Photo Series
Category Qty       Description (Make, Model, SN)          Ref #     Manufacturer                          Value
                                                                                      1
Material   2   Hercules 1-ton structural I-beam                   Hercules           99    99 thru 100
               mounted jibs, both with 1-ton P & H
               cable hoists with block and pendant
               control, 15' arm and 10' height floor to
Handling       hook
Material   2   Hercules 1-ton structural I-beam                   Hercules          100
               mounted jibs, both with 1-ton P & H
               cable hoists with block and pendant
               control, 15' arm and 10' height floor to
Handling       hook
 Parts     1   Crystal Clean 48" X 32" safety parts               Crystal Clean     101




Washers        cleaning tank
 Heater    1   Renco M/N BC induction bearing heater              Renco             102




 Press     1   Royal Service M/N 3462272M, S/N                    Royal Service     103

               86010, 50-ton H-frame press with 34"

               between uprights
 Press     1   H-frame press, 10-ton capacity, 20"                                  104




               between uprights
 Tools     Lot Tool board with pneumatic and hand                                   105




               tools
                                                                                     Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                        1
Material   1   Spanco 2-ton full round column jib crane             Spanco             106
               with 360⁰ rotation, 14'6" arm, 8' floor to
               hook height with P & H 2-ton cable hoist,
Handling       block and pendant control
Material   1   Metal frame, control panel, 160 gallon air                             107   107 thru 108




               receiver tank and piping
Material   1   Metal frame, control panel, 160 gallon air                             108




               receiver tank and piping
 Motor     1   Compressor frame with Toshiba 150 HP                                   109




               motor, 60 gallon receiver tank
  Lift     1   800 lb capacity hydraulic boom lift                                    110




 Sand      1   Dry-Blast booth                                                        111




 Blast
 Sand      1   CM M/N CM1000 rotary sand blast                      CM                112   112 thru 114
               cabinet with 32" diameter chamber and
               turn table with electronic controls and
               cyclone dust collector and media return
 Blast         conveyor
                                                                                    Photo # Photo Series
Category Qty        Description (Make, Model, SN)           Ref #    Manufacturer                          Value
                                                                                       1
 Sand      1   CM M/N CM1000 rotary sand blast                      CM                113
               cabinet with 32" diameter chamber and
               turn table with electronic controls and
               cyclone dust collector and media return
 Blast         conveyor
 Sand       1 CM M/N CM1000 rotary sand blast                       CM               114
               cabinet with 32" diameter chamber and
               turn table with electronic controls and
               cyclone dust collector and media return
 Blast         conveyor
Cabinets   Lot Small parts cabinets with fasteners                                   115




Welding    1    4' X 8' welding table with vise                                      116




 Table
Material   Lot Large quantity of pallet racking, 20' high                            117   117 thru 121

                X 36" wide uprights X 90" & 96" cross

Handling       beams
Material   Lot Large quantity of pallet racking, 20' high                            118

                X 36" wide uprights X 90" & 96" cross

Handling       beams
Material   Lot Large quantity of pallet racking, 20' high                            119

                X 36" wide uprights X 90" & 96" cross

Handling        beams
                                                                                     Photo # Photo Series
Category Qty        Description (Make, Model, SN)           Ref #     Manufacturer                          Value
                                                                                        1
Material   Lot Large quantity of pallet racking, 20' high                              120

                X 36" wide uprights X 90" & 96" cross

Handling       beams
Material   Lot Large quantity of pallet racking, 20' high                             121

                X 36" wide uprights X 90" & 96" cross

Handling        beams
Material   1            ⁰
                Gorbel 3-ton full round coulmn jib crane            Gorbel            122   122 thru 123
                with 360 rotation, 15' arm, Coffing 3-ton
                chain hoistg with 3-ton block, pendant
Handling        control and 11' height, floor to hook
Material   1             ⁰
                Gorbel 3-ton full round coulmn jib crane            Gorbel            123
                with 360 rotation, 15' arm, Coffing 3-ton
                chain hoistg with 3-ton block, pendant
Handling        control and 11' height, floor to hook
Welding    1    4' X 8' welding table with vise                                       124




 Table
Material   Lot Parts bins and racks                                                   125   125 thru 126




Handling
Material   Lot Parts bins and racks                                                   126




Handling
                                                                                       Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                            Value
                                                                                          1
Material   1   Belliss & Marcom 5-ton A-frame hoist                 Belliss & Marcom     127
               with 12' of rail, 10' height from floor to
               bottom of beam, with 1) CM 5-ton chain
               fall with chain operated trolly and 1) CM
Handling       1-ton chain hoist and trolly
  Drill    1   Milwaukee 3/4" capacity drill on frame               Milwaukee           128




               with tool balancer
 Pallet    1   Yale M/N MPW045-EN24T2736, S/N                                           129
               B802N02430C, 4500 lb capacity battery
               powered pallet truck with 24 Volt battery
 Truck         and 42" forks and built-in charger
 Engine    1   500 to 800 lb capacity engine hoist                                      130




 Hoist
Spanco     2   2) Spanco 2-ton stand alone                          Spanco              131   131 thru 138
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco     2   2) Spanco 2-ton stand alone                          Spanco              132
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco     2   2) Spanco 2-ton stand alone                          Spanco              133
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
                                                                                     Photo # Photo Series
Category Qty       Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                        1
Spanco    2    2) Spanco 2-ton stand alone                          Spanco             134
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco    2    2) Spanco 2-ton stand alone                          Spanco            135
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco    2    2) Spanco 2-ton stand alone                          Spanco            136
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco    2    2) Spanco 2-ton stand alone                          Spanco            137
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
Spanco    2    2) Spanco 2-ton stand alone                          Spanco            138
               bridgecranes with 2) hoist rails, spanning
               32' with approximately 50' of dual rails
               with electric bus, each bridge has a
               Budget 2-ton chain hoist with block and
               pendant control. All framework is bolted
 Work     1    Metal work bench with parts cabinets                                   139




Benches       and pneumatic hose reel
 Hose     Lot Assortment of pneumatic hose reels                                      140   140 thru 142




 Reels
                                                                                   Photo # Photo Series
Category Qty       Description (Make, Model, SN)          Ref #     Manufacturer                          Value
                                                                                      1
 Hose    Lot Assortment of pneumatic hose reels                                      141




 Reels
 Hose    Lot Assortment of pneumatic hose reels                                     142




 Reels
 Press    1    Dake M/N 25H, S/N 1010855, 25-ton H-               Dake              143




               frame press with 34" between uprights
 Press    1    Jet M/N AP-5, S/N 333650 arbor press               Jet               144




             on steel table
 Lathe    1  Teco 13" swing X 40"cc gap bed engine                Teco              145   145 thru 146
             lathe with 6" 3-jaw chuck, 8" 4-jaw chuck,
             steady rest tail stock, 4-position tool
             post, chip pan, back splash, foot brake,
             70 to 1255 RPM, inch/ metric threading
 Lathe    1 Teco 13" swing X 40"cc gap bed engine                 Teco              146
             lathe with 6" 3-jaw chuck, 8" 4-jaw chuck,
             steady rest tail stock, 4-position tool
             post, chip pan, back splash, foot brake,
             70 to 1255 RPM, inch/ metric threading
 Tools   Lot Cart with full set of bearing and wheel                                147   147 thru 148




               pullers
                                                                                      Photo # Photo Series
Category Qty        Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                         1
 Tools     Lot Cart with full set of bearing and wheel                                  148




               pullers
 Tools     Lot Cart with selection of puller bolts and eye                             149   149 thru 150




               bolts
 Tools     Lot Cart with selection of puller bolts and eye                             150




                bolts
Grinder    1    Wissota 6" double end pedestal grinder               Wissota           151




  Drill    1    Jet M/N JDP-20MF, S/N 2110474, 21"                   Jet               152

                floor model drill press with 3/4" capacity

 Press          drill chuck
Sander     1    Enco 12" disk sander and 6" belt sander              Enco              153




                on pedestal
Cabinets   7    6) 2-door storage cabinets and 1)                                      154   154 thru 155




                flammable storage cabinet
                                                                                       Photo # Photo Series
Category Qty         Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                          1
Cabinets     7   6) 2-door storage cabinets and 1)                                       155




                 flammable storage cabinet
Positioner   1   Ohio welding positioner                              Ohio              156




  Press      1   OTC P/N 210324, S/N 1014, 80/100-ton                 OTC               157   157 thru 158

                 rool-bed H-frame press with 50 1/2"

                 between uprights and with a roll out table
  Press      1   OTC P/N 210324, S/N 1014, 80/100-ton                 OTC               158

                 rool-bed H-frame press with 50 1/2"

                 between uprights and with a roll out table
Welding      3   Oxygen/Acetylene welding cart with                                     159

                 regulators, gauges, hoses, cutting torch

  Cart           and welding torch (No tanks)
 Grinder     1   Chevalier M/N FSG-1224AD hydraulic                   Chevalier         160   160 thru 163
                 surface grinder with 12" X 24" electro-
                 magnetic chuck, 14" diameter grind
                 wheel, power feeds, power dressing, way
                 lube pump, magnetic coolant separator
                 and control console
 Grinder     1   Chevalier M/N FSG-1224AD hydraulic                   Chevalier         161
                 surface grinder with 12" X 24" electro-
                 magnetic chuck, 14" diameter grind
                 wheel, power feeds, power dressing, way
                 lube pump, magnetic coolant separator
                 and control console
                                                                                      Photo # Photo Series
Category Qty       Description (Make, Model, SN)             Ref #     Manufacturer                          Value
                                                                                         1
Grinder   1    Chevalier M/N FSG-1224AD hydraulic                    Chevalier          162
               surface grinder with 12" X 24" electro-
               magnetic chuck, 14" diameter grind
               wheel, power feeds, power dressing, way
               lube pump, magnetic coolant separator
               and control console
Grinder   1    Chevalier M/N FSG-1224AD hydraulic                    Chevalier         163
               surface grinder with 12" X 24" electro-
               magnetic chuck, 14" diameter grind
               wheel, power feeds, power dressing, way
               lube pump, magnetic coolant separator
               and control console
  Mill    1    Bridgeport M/N J-2, S/N241835, vertical               Bridgeport        164   164 thru 165
               milling machine with 2 HP variable speed
               head, 42" table with power feed, Anilam
               2-axis DRO, 6" milling vise, R-8 collet set
               and way lube pump
  Mill    1    Bridgeport M/N J-2, S/N241835, vertical               Bridgeport        165
               milling machine with 2 HP variable speed
               head, 42" table with power feed, Anilam
               2-axis DRO, 6" milling vise, R-8 collet set
               and way lube pump
  Lift    1    Beech 1000 lb capacity hydraulic lift on              Beech             166




               cart with counter weights
 Engine   1    Westward M/N 5Z010G, 1/4-ton to 3/4-                  Westward          167




 Hoist         ton capacity hydraulic engine hoist
 Work     1    30" X 72" butcher block top work bench                                  168




Benches        with 5" swivel base vise
                                                                                      Photo # Photo Series
Category Qty        Description (Make, Model, SN)            Ref #     Manufacturer                          Value
                                                                                         1
 Parts      1   Graymills M/N DMD236, S/N 1DBW4-B-                   Graymills          169

                5 drum mounted parts washing station

Washers         with pump
Grinder     1   Manhattan M/N 951911, S/N 31255-7,                   Manhattan         170   170 thru 171
                hydraulic surface grinder with power
                feeds, dust collector, coolant, hydraulic
                power pack, way lube pump, 6" X 18"
                magnetic chuck
Grinder     1   Manhattan M/N 951911, S/N 31255-7,                   Manhattan         171
                hydraulic surface grinder with power
                feeds, dust collector, coolant, hydraulic
                power pack, way lube pump, 6" X 18"
                magnetic chuck
  Saw       1   DeWalt M/N DW716, 12" compound                       DeWalt            172




                miter saw on table
Inspectio   1   Tru-stone 36" X 72" X 12" thick, zero                Tru-stone         173

                ledge granite surface plate on steel floor

   n            stand
 Lathe      1   Forward 26" swing X 60"cc, S/N 993063                Forward           174   174 thru 175
                engine lathe with D2-8 Camlock spindle,
                20" face plate, 12" & 20" 3-jaw chucks,
                Klopfer tool post, tail stock, 2-axis DRO,
                coolant, foot brake, 23 to 1500 RPM
 Lathe      1   Forward 26" swing X 60"cc, S/N 993063                Forward           175
                engine lathe with D2-8 Camlock spindle,
                20" face plate, 12" & 20" 3-jaw chucks,
                Klopfer tool post, tail stock, 2-axis DRO,
                coolant, foot brake, 23 to 1500 RPM
                                                                                    Photo # Photo Series
Category Qty       Description (Make, Model, SN)           Ref #     Manufacturer                          Value
                                                                                       1
  Mill    1    Forward vertical milling machine M/N                Forward            176 176 thru 179
               3VH, S/N's 7363 & 7625, with 50" tables
               with power feeds, 40 to 4200 variable
               speed heads, 3 HP drive motors, S/N
               7363 has a Newall 2-axis DRO. Both
               mills have dividing heads
  Mill    1    Forward vertical milling machine M/N                Forward           177
               3VH, S/N's 7363 & 7625, with 50" tables
               with power feeds, 40 to 4200 variable
               speed heads, 3 HP drive motors, S/N
               7363 has a Newall 2-axis DRO. Both
               mills have dividing heads
  Mill    1    Forward vertical milling machine M/N                Forward           178
               3VH, S/N's 7363 & 7625, with 50" tables
               with power feeds, 40 to 4200 variable
               speed heads, 3 HP drive motors, S/N
               7363 has a Newall 2-axis DRO. Both
               mills have dividing heads
  Mill    1    Forward vertical milling machine M/N                Forward           179
               3VH, S/N's 7363 & 7625, with 50" tables
               with power feeds, 40 to 4200 variable
               speed heads, 3 HP drive motors, S/N
               7363 has a Newall 2-axis DRO. Both
               mills have dividing heads
 Lathe    1    Omnitrade M/N SN50B, S/N                            Omnitrade         180   180 thru 181
               050150811603, 21" swing X 66"cc, gap
               bed engine lathe with 12" 3-jaw chuck,
               D1-6 Camlock spindle nose, 2 1/8" hole
               thru spindle, 4-position tool post, tail
               stock, Trav-a-dial indicator on carriage,
 Lathe    1    Omnitrade M/N SN50B, S/N                            Omnitrade         181
               050150811603, 21" swing X 66"cc, gap
               bed engine lathe with 12" 3-jaw chuck,
               D1-6 Camlock spindle nose, 2 1/8" hole
               thru spindle, 4-position tool post, tail
               stock, Trav-a-dial indicator on carriage,
 Lathe    1    Forward 15" swing X 40"cc gap bed                   Forward           182   182 thru 183
               engine lathe with tail stock, 4-position
               tool post, D1-4 Camlock spindle nose, 1
               3/4" diameter hole through spindle and
               foot brake
                                                                                    Photo # Photo Series
Category Qty        Description (Make, Model, SN)          Ref #     Manufacturer                          Value
                                                                                       1
 Lathe     1    Forward 15" swing X 40"cc gap bed                  Forward            183
                engine lathe with tail stock, 4-position
                tool post, D1-4 Camlock spindle nose, 1
                3/4" diameter hole through spindle and
                foot brake
  Mill     1    Hartford S/N 781005 vertical milling               Hartford          184   184 thru 185
                machine with 40" table, power feed, 2-
                HP drive motor with step pulleys, 80 to
                2720 RPM, R-8 spindle
  Mill     1    Hartford S/N 781005 vertical milling               Hartford          185
                machine with 40" table, power feed, 2-
                HP drive motor with step pulleys, 80 to
               2720 RPM, R-8 spindle
 Work      Lot Assortment of 30" X 72" butcher block                                 186




Benches        table tops with metal frames
Material   Lot Assortment of utility carts and platform                              187   187 thru 188




Handling       trucks
Material   Lot Assortment of utility carts and platform                              188




Handling     trucks
Bus Bar 100' Bus bar with 18) plug-in disconnects                                    189   189 thru 192
                                                                                       Photo # Photo Series
Category Qty         Description (Make, Model, SN)           Ref #      Manufacturer                          Value
                                                                                          1
Bus Bar     100' Bus bar with 18) plug-in disconnects                                    190




Bus Bar     100' Bus bar with 18) plug-in disconnects                                   191




Bus Bar     100' Bus bar with 18) plug-in disconnects                                   192




Positioner Lot Assortment of powered positioners                                        193   193 thru 194




    s
Positioner Lot Assortment of powered positioners                                        194




    s
Inspectio   Lot Starrett 36" X 48" X 6" zero ledge granite           Starrett           195   195 thru 196

                 surface plate with height gauges and

    n           super micrometer
Inspectio   Lot Starrett 36" X 48" X 6" zero ledge granite           Starrett           196

                 surface plate with height gauges and

    n            super micrometer
                                                                                  Photo # Photo Series
Category Qty         Description (Make, Model, SN)         Ref #   Manufacturer                          Value
                                                                                     1
Furniture   Lot Private office of furniture                                         197




Furniture   Lot Lunch room furniture, tables, chairs, TV                           198   198 thru 201

                 & stand, microwaves, refrigerator,

                bulletin boards and white board
Furniture   Lot Lunch room furniture, tables, chairs, TV                           199

                 & stand, microwaves, refrigerator,

                bulletin boards and white board
Furniture   Lot Lunch room furniture, tables, chairs, TV                           200

                 & stand, microwaves, refrigerator,

                bulletin boards and white board
Furniture   Lot Lunch room furniture, tables, chairs, TV                           201

                 & stand, microwaves, refrigerator,

                bulletin boards and white board
Lockers     Lot Men's locker room with lockers                                     202   202 thru 203




Lockers     Lot Men's locker room with lockers                                     203
                                                                                    Photo # Photo Series
Category Qty         Description (Make, Model, SN)           Ref #   Manufacturer                          Value
                                                                                       1
Furniture   Lot Private office of furniture                                           204




Furniture   Lot Private office of furniture                                          205




Furniture   Lot Private office of furniture                                          206




Furniture   4    4) Cubicles with partitions and furniture                           207   207 thru 210




Furniture   4    4) Cubicles with partitions and furniture                           208




Furniture   4    4) Cubicles with partitions and furniture                           209




Furniture   4    4) Cubicles with partitions and furniture                           210
                                                                                      Photo # Photo Series
Category Qty         Description (Make, Model, SN)          Ref #      Manufacturer                          Value
                                                                                         1
Furniture   Lot Private office of furniture                                             211




Furniture   Lot Reception area furniture                                               212




Furniture   Lot Conference room with conference table,                                 213   213 thru 214

                 chairs, flip chart, white board and pull

                down projection screen
Furniture   Lot Conference room with conference table,                                 214

                 chairs, flip chart, white board and pull

                down projection screen
Supplies    Lot Office supplies, cabinets, printer/FAX                                 215   215 thru 216




                machine
Supplies    Lot Office supplies, cabinets, printer/FAX                                 216




                 machine
Welder      1    Miller Syncrowave 250 CC/AC.DC arc                 Miller             217   217 thru 218
                 welding power source, Stock # 903056,
                 S/N KA740932 on cart with electrode
                 holder, ground clamp and cables
                                                                                 Photo # Photo Series
Category Qty       Description (Make, Model, SN)       Ref #      Manufacturer                          Value
                                                                                    1
Welder    1    Miller Syncrowave 250 CC/AC.DC arc              Miller              218
               welding power source, Stock # 903056,
               S/N KA740932 on cart with electrode
               holder, ground clamp and cables
 Parts    2    Parts washing tanks                                                219




Washers
 Scrap    Lot Assortment of metal scrap                                           220   220 thru 222




 Scrap    Lot Assortment of metal scrap                                           221




 Scrap    Lot Assortment of metal scrap                                           222




Welder    1    Nelson M/N TR-1800A stud welder with            Nelson             223




               cables and controls
Support   1    Forklift safety basket, 3' X 4' with                               224   224 thru 225




               guardrails
                                                                                    Photo # Photo Series
Category Qty       Description (Make, Model, SN)             Ref #   Manufacturer                          Value
                                                                                       1
Support   1    Forklift safety basket, 3' X 4' with                                   225




              guardrails
 Motors   Lot Large assortment of electric motors from                               226




               1 1/2 HP to 40 HP




               Substantial quantity of support
               equipment, including: hand tools, power
               tools, pneumatic tools, tool boxes, lifting
               cradles, lifting straps, inspection tools,
               cutting tools, maintenance supplies,
               ladders, etc.
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1
                                                                      Photo # Photo Series
Category Qty   Description (Make, Model, SN)   Ref #   Manufacturer                          Value
                                                                        1

								
To top