Wireless Security Systems With crime on the rise, home security systems are a must have. With burglars becoming more and more common, you simply must protect your loved ones as well as your possessions. There are several different types of security systems available for you to choose from. For your home, there are wired and wireless security systems available. Each one has its advantages and disadvantages, along with the differences in price as well. The driving technology found with both wired and wireless security systems are quite different. Wireless security systems don’t need to be wired through the house; they will instead send transfer messages to the control panel through radio signals. When they were first introduced, wireless security systems were proved to be unreliable when compared to the wired systems. As time went by and more and more people looked into them, wireless systems began to take form. When compared to wired systems, wireless security systems are a lot easier and more convenient to install due to the fact of there being no wires. Wireless systems can save you a lot of money, time, and effort due to there being no ripping of the floors or walls in your home. Wireless systems on the other hand are more expensive than wired systems and you’ll need to replace their batteries on a periodic basis. The primary advantage to wireless security systems is the fact that they are easy to relocate, meaning that you can easily shift them from one home to another. Wireless security systems use the same components as other security systems such as the touchpad, control panel, cameras, detectors, and alarms. Wireless systems rely on radio frequencies that are transmitted by the door contacts, windows, and motion activated sensors. The touch pads that are located at the entrances to the home will provide activation and deactivation of the system. In the event of the power failing, a backup system will take over the wireless system and continue to provide security for your home. To use a wireless system, all you need to do is input the code through the control panel. Normally, this is done prior to entering and leaving your home. Once the code is input into the control panel, the control panel will send remote signals to the rest of the system that will activate the alarms. Depending on the system you have, an alarm will go off either by motion detection or a window or door being opened. If you look around you can find several different wireless security systems, many of which you can install yourself. Before you buy a system though, you should always consult a professional who can survey your home and suggest the equipment you need. Even though it may cost a bit more money, it will be more than worth it down the road. PPPPP (word count 471)