Questionnaire Mixing and Dispersing by 5Wyc9c19

VIEWS: 1 PAGES: 2

									Questionnaire Mixing and Dispersing

Company:

Contact:

Address:




Telephone:

Telefax:

eMail:

Your reference:

Date:



Description of application, sketch
Please enter data into table on reverse side




                                               info@rcprocess.se
Sulzer Chemtech Ltd
Mixing and Reaction Technology, MRT 0655
P.O. Box 65                                    Fiskhamnsgatan 6A
CH-8404 Winterthur, Switzerland
Telephone 052 262 67 20
                                               SE-414 58 Göteborg
Telefax 052 262 00 69                          Telefon: 031-85 04 60   Please turn over
                                               Fax:     031-85 04 61
                                               Sverige
Data for engineering

Component                                                 Unit       1             2              3            Mixture

Name
Fluidum class
                                 1)
Gaseous / liquid / solid
                            minimum
Flow rate                   normal

                            maximum
Viscosity at operating conditions
                                            2)
Density at operating conditions
1)
     For suspension/dust/solids: indicate particle size
2)
     For solids: indicate bulk density


Are the components                              soluble             insoluble in each other?
Soluble components :                        Desired homogeneity =
Insoluble components:                       Interfacial tension =
                                            Desired droplet / bubble size =
                                            Type of settler after the mixer =


Operating conditions:                       Pressure =                                 Temperature =


Flow pattern:                                    Uniform                      Pulsating with pulsation factor =


Maximum allowed pressure drop =


Planned installation:                            Horizontal                   Vertical, whereas          Flow up
Maximum installation length:                                                                             Flow down


Planned pipe diameter =                                          Other diameter possible?                Yes          No


Material of construction:
Mixing elements:          V4A                AISI 316
                                            ˆ                              Polypropylene                PVDF

Mixer pipe:                           V4A    AISI 316
                                            ˆ                              Polypropylene                Carbon steel/PTFE



Design:
Mixing elements:                      Non removable                           Removable
Mixer pipe:                           With weld ends                          With flanges
                                      With dosing pipe NPS ____               With jacket

Flange type:                          DIN 2633 PN16                           DIN 11851 (Sanitary screw connection)
                                      ANSI B 16.5 150 lbs


Inner pipe:          Design pressure =                                          Design temperature =
Jacket:              Design pressure =                                          Design temperature =
PED: category / module ________________                                         ATEX: Ex-zone / Gas group: ___________

								
To top