Rope Inspection�Overhead Crane Checklist by WV05FP

VIEWS: 0 PAGES: 1

									                    Rope Inspection—Overhead Crane Checklist
                                  (Must be conducted at least once a month)

Division:                       Location:                                                          Rope ID:
Date:                           Inspector:
                                                                            (Print and Sign)

NOTE:        Each deficiency identified by a check in the “No” column (below) will be carefully examined and a
             determination will be made as to whether the deficiency constitutes a safety hazard. Any
             deterioration that results in appreciable loss of original strength shall be carefully observed and a
             determination will be made as to whether the deterioration would make further use of the rope a
             safety hazard.


Inspection Items                                                                  Reference        Yes    No    N/A
1.   Is there any reduction of rope diameter below nominal diameter          1910.179(m)(1)(i)
     due to loss of core support, internal or external corrosion, or wear
     of outside wires?
     Comments:


2.   Are there any broken outside wires? If Yes, what is the degree           910.179(m)(1)(ii)
     of distribution or concentration of such broken wires?
     Comments:


3.   Are there any worn outside wires?                                       1910.179(m)(1)(iii)
     Comments:


4.   Are there any corroded or broken wires at end connections?               1910.179(m)(1)(iv)
     Comments:


5.   Are there any corroded, cracked, bent, worn, or improperly               1910.179(m)(1)(v))
     applied end connections?
     Comments:


6.   Is there any severe kinking, crushing, cutting, or unstranding?          1910.179(m)(1)(vi)
     Comments:




EHS-FORM-1.6.2D—12/13/07

								
To top