ACI Program 5 Part 6-1 Tirehand Annual & Monthly

Document Sample
ACI Program 5 Part 6-1 Tirehand Annual & Monthly Powered By Docstoc
					                                            American Crane Inc.
                           Quarterly Tire Manipulator Inspection Reporting Form

 Store Location Truck #           S/N     In-Service       Make          Model         Max. Tire Size        Max. Weight

Operator Instructions: If any problem occurs in the performance of the crane or if you notice that the equipment is not
performing to what you think is normal, notify your supervisor immediately.
Perform the following tasks
                                                                Quarterly Inspection Report:
for the quarterly inspection.
  Copy and use this sheet for                    Needs Repair                         Inspection Notes
each inspection.                            OK Repair Date
                                                                  Mark the appropriate box with X to verify inspection
Date last inspected
High pressure wash
Check oil level in gearbox
Lubricate tire handler as needed
Visually Inspect for Damage:
Cylinder rod and cases
Structural components
Main gear bearing teeth
Rotation pad gear bearing
Pinion gear teeth
Visually Inspect for Oil Leaks or Damage:
Hydraulic clamping arm cylinders
Hydraulic pad rotation cylinders
Gear box rotation system
Hydraulic valve sections
Hydraulic flow divider
Hydraulic hoses
Visually Check the Following:
Check all pin retainers
Pins & bushings in all areas
Gripping teeth on gripping pad
Crane control knobs missing
Control decals & capacity chart
Re-Torque the Following:
Main gear bearing bolts                                          (1st. qt each yr.)   (Recommended torque)                ft.lbs.
Pad gear bearing bolts                                           (1st. qt each yr.)   (Recommended torque)                ft.lbs.
Check Performance of the Following:
Crane controls
Main gear bearing
Pad rotation gear bearing
Clamping arms
Rotation system
Stability of unit with rated load

                                                                      Date:______________
              Inspection Completed
                                                                      BY:____________________________



  ACI Program 5 Part 6-1                         ACI 888-350-6288                                       Property of ACI
                                          American Crane Inc.
                         Quarterly Tire Manipulator Inspection Reporting Form




ACI Program 5 Part 6-1                      ACI 888-350-6288                    Property of ACI
                                               American Crane Inc.
                                      Annual Tire Manipulator Inspection Log

   Store Location          Truck #     S/N       In-Service         Make         Model    Max. Tire Size          Max. Weight

This unit must be properly washed prior to each monthly inspection and then visually inspected as per the following
recommendations.
Operator Instructions: If any problem occurs in the performance of the tire manipulator or if you notice that the equipment is
not performing to what you think is normal, notify your supervisor immediately.
   Perform the following tasks                       Year                  Year                Year                     Year
    for the annual inspection                         1                      2                     3                        4
        Inspection Project Number            1   2          3   4   5   6         7   8   9   10       11   12   13    14       15   16
Date last inspected
High pressure wash
Check oil level in gearbox
Lubricate tirehand as needed
Visually Inspect for Damage:
Cylinder rod and cases
Structural components
Main gear bearing teeth
Rotation pad gear bearing teeth
Pinion gear teeth
Visually Inspect for Oil Leaks or Damage:
Hydraulic clamping arm cylinders
Hydraulic pad rotation cylinders
Gear box rotation system
Hydraulic valve sections
Hydraulic flow divider
Hydraulic hoses
Visually Check the Following:
Missing pin retainers
Pins & bushings in all areas
Gripping teeth on gripping pad
Crane control knobs missing
Control decals & capacity chart
Re-Torque the Following:
Main gear bearing bolts
Pad gear bearing bolts
Check Performance of the Following:
Crane controls
Main gear bearing
Pad rotation gear bearing
Clamping arms
Rotation system
Stability with rated load
Other:




      ACI Program 5 Part 6-1                              ACI 888-350-6288                                       Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                  American Crane Inc.
                         Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1               ACI 888-350-6288             Property of ACI
                                               American Crane Inc.
                                      Annual Tire Manipulator Inspection Log
 Store Location Truck #             S/N       In-Service         Make         Model     Max. Tire Size          Max. Weight

This unit must be properly washed prior to each monthly inspection and then visually inspected as per the following
recommendations.
Operator Instructions: If any problem occurs in the performance of the tire manipulator or if you notice that the equipment is
not performing to what you think is normal, notify your supervisor immediately.

  Perform the following tasks                     Year                   Year                Year                      Year
   for the annual inspection                       5                      6                      7                        8
       Inspection Project Number          1   2          3   4   5   6          7   8   9   10       11   12   13    14       15   16
Date last inspected
High pressure wash
Check oil level in gearbox
Lubricate tirehand as needed
Visually Inspect for Damage:
Cylinder rod and cases
Structural components
Main gear bearing teeth
Rotation pad gear bearing teeth
Pinion gear teeth
Visually Inspect for Oil Leaks or Damage:
Hydraulic clamping arm cylinders
Hydraulic pad rotation cylinders
Gear box rotation system
Hydraulic valve sections
Hydraulic flow divider
Hydraulic hoses
Visually Check the Following:
Missing pin retainers
Pins & bushings in all areas
Gripping teeth on gripping pad
Crane control knobs missing
Control decals & capacity chart
Re-Torque the Following:
Main gear bearing bolts
Pad gear bearing bolts
Check Performance of the Following:
Crane controls
Main gear bearing
Pad rotation gear bearing
Clamping arms
Rotation system
Stability with rated load
Other:




       ACI Program 5 Part 6-1A                                                                                  Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                                   American Crane Inc.
                          Annual Tire Manipulator Inspection Log




ACI Program 5 Part 6-1A                                            Property of ACI
                               Notes




ACI Program 5 Part 6-1-1   ACI 888-350-6288   property of ACI
                                    Notes

Year One




Year Two




Year Three




Year Four




    ACI Program 5 Part 6-1-1B   ACI 888-350-6288   Property of ACI
                  Notes

Year Five




Year Six




Year Seven




Year Eightr




              ACI 888-350-6288   Property of ACI

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:2
posted:10/4/2012
language:English
pages:29