MODEL SPECIFICATION � FASTLOCK UNI ROOF PANELS by tmV8HuPA

VIEWS: 19 PAGES: 6

									MODEL SPECIFICATION – FASTLOCK UNI ROOF PANELS
This model specification is designed for specifiers of Fastlock ® products and is given in good faith.

The purpose/extent of the enclosed model specification is to provide an indicative outline of the
general processes required to complete a successful Fastlock Uni roof. It is not the intent of this
model specification to provide step by step guidance covering all aspects and issues that may be
relevant to the installation of this project.

Fastlock® is backed by comprehensive, international technical support, offering you expert advice
and information at every stage of a project – from initial concept through to completion. Just call or
email Fastlock Customer Support;
Telephone:0870 060 6077
Email: info@fastlock-system.co.uk

GENERAL

1

Polycarbonate Roof Panels
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev, Tel: 0870 060 6077,
Email: info@fastlock-system.co.uk, Web: www.fastlock-system.co.uk
Product reference: Fastlock Uni roof panel
Colour: To be advised
Size: Effective width 20 cm
Fixing: approx. 10 invisible, transparent polycarbonate top clips per m2 fixed with aluminium nails
and located in positions as recommended in Fastlock Uni installation instructions.
Finish:
To meet the specified performance requirements the roof panels and accessories required must;
(1) be manufactured from high quality flexible polycarbonate with a radius curvature which can be
achieved during fixing on site of minimum 1.5 m; (2) have an invisible, non penetrative fixing
system; (3) an incorporated UV inhibitor; (4) be assessed to have a product life span of more than
25 years (4) have a colour fastness guarantee of less than 15 units measured according to ASTM
D308-85 compared to the original value.

PRODUCTS

2

Fastlock Uni panels
Length: 2.0, 3.0, 3.5, 4.0, 4.5, 5.0 and 6.0 m
Width: 20 cm
Type: Polycarbonate roofing panel in customized or standard lengths
Location: The product is used as roofing material.
Product reference: Please refer to the Fastlock Uni Shopping List.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk
3

Angle panel – small bead
Height: 8 cm
Width: 10 cm
Type: Polycarbonate roofing panel in standard lengths or customized lengths.
Location: The product is used as the first panel where the side of the roof abuts against a wall.
Product reference: Fastlock no. 10932 white, 10930 transparent, 15510 coloured.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

4

Angle panel – large bead
Height: 8 cm
Width     10 cm
Type: Polycarbonate roofing panel in standard or customized lengths.
Location: The product is used as the last panel where the side of the roof abuts against a wall.
Product reference: Fastlock no. 10933 white, 10931 transparent, 15510 coloured.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

5

Sealing strip
Length: 1 m
Type: Polyethylene foam.
Location: The product is mounted on top of the panels transverse to their length at the rear edge
where the top of the roof abuts against a wall.
Product reference: Fastlock no. 12237.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

6

Packing strip
Length: 1 m
Type: Polyethylene foam.
Location: The product is fitted under the panels on top of the timber batten or metal purlin
transverse to the length of the panels at the rear edge where the top of the roof abuts against a
wall. It may also be mounted at the front edge to prevent the water from running back under the
panels.
Product reference: Fastlock no. 12238.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk
7

Beading strip
Length: 1 m
Type: Polyethylene foam.
Location: The product is mounted on top of the panel along its length where the side of the roof
abuts against a wall.
Product reference: Fastlock no. 12240.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

8

Universal flashing profile
Length: 1 m
Type: Aluminium profile with indentations at 30 mm spacings to facilitate accurate forming on site.
Location: The product is used as flashing profile protecting the fascia board.
Product reference: Fastlock no. 12838.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

9

Wall flashing profile
Length: 1 m
Type: Aluminium profile
Location: The product is used where the side of the roof abuts against a wall, on top of the angle
panels as protection against water penetration.
Product reference: Fastlock no. 13034.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

10

Facade flashing profile
Length: 1 m
Effective width: 980 mm
Type: Aluminium profile
Location: The product is used where the side of the roof abuts against a wall, on top of the beading
strip, or where the top of the roof abuts against a wall, on top of the sealing strip, as protection
against water penetration.
Product reference: Fastlock no. 13039
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk
11

Fascia flashing profile
Length: 1 m
Effective width: 960 mm
Type: Aluminium profile with identical notching at both ends to enable installation in both directions.
Location: The product is used as flashing profile protecting the fascia board.
Product reference: Fastlock 13040.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

12

Front flashing profile
Length: 1 m
Effective width: 980 mm
Type: Aluminium profile
Location: The product is used at the front edge in connection with the installation of gutters to
prevent water from running back under the Fastlock roof panels.
Product reference: Fastlock 13041.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

13

Closing clip
Type: Acrylic water stop
Location: The product is used at the front edge in connection with the installation of gutters to
prevent water from running back under the Fastlock roof panels.
Product reference: Fastlock 13038.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

14

Ridge flashing profile 20o
Length: 1.25 m
Type: Aluminium profile
Location: The product is used to seal the ridge of two adjoining sloped roofs.
Product reference: Fastlock 13092
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk
15

Front clips and nails
Type: Aluminium clips and nails
Fixing: 10 nails per m2
Location: The product is used to fix the Fastlock roof panels to the timber battens.
Product reference: Fastlock 12837
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

16

Side clips and nails
Type: Aluminium clips and nails or screws
Fixing: 1 clips for each interval of 60 cm
Location: The product is used to fix the first and last panel of the Fastlock roof to the timer battens
or metal purlins.
Product reference: Fastlock 12892
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

17

Top clips and nails
Type: Polycarbonate top clips and aluminium nails
Fixing: 10 clips each m2.
Location: The product is used to fix the Fastlock roof panels to the timber battens or metal purlins.
Product reference: Fastlock 13036.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

18

Nails 25 x 2.6 mm
Type: Aluminium nails
Product reference: Fastlock 15759.
Manufacturer: Fastlock®, c/o Icopal a/s, Mileparken 38, DK-2730 Herlev.
Email: info@fastlock-system.co.uk, Tel: 0870 060 6077, Web: www.fastlock-system.co.uk

TERMS AND CONDITIONS OF USE

The enclosed information relates exclusively to products manufactured or distributed by Fastlock®.
The information is not designed to be exhaustive and is given in good faith.
All users must verify the information and ensure that it is suitable for the particular project
application for which it is required.
This model specification assumes that the new or existing roof structure is in a satisfactory
condition and is built in accordance with accepted building practice. It is the client’s responsibility to
satisfy himself that the roof is structurally sound and that local conditions and current Health and
Safety Regulations have been taken into account before any contract is undertaken.
In line with our policy of constant product improvement, Fastlock® reserves the right to modify
designs and specifications without prior notice.

COPYRIGHT INFORMATION

Please read before incorporating the above information into your specifications.

Ownership of copyright and all other intellectual property rights in this model specification remains
at all times with Fastlock®. Fastlock grants you a limited licence to use the contents of this model
specification on the terms of this Agreement.

You may only use the model specification to prepare specifications, for projects involving the
construction of a building or buildings on which you are engaged as consultant or contractor, and
for which Fastlock Roofing Products have been or will be specified.

All other uses of the model specifications are specifically excluded, and its contents may not be
amended for use with other products or by other manufacturers.

You may not reverse-engineer, de-compile or modify the model specifications in any way except to
the extent required to be permitted by law.

Any misuse of the model specifications or breach of this Agreement or any of Fastlock’s intellectual
property rights can and will be pursued by Fastlock to the full extent of the law.

Please feel free to contact Fastlock® if you require clarification of any of the terms. If you do not
agree to the terms of use, you must not use this model specification.

								
To top