BEKA STADIALUX XP Spec by HC121004055119

VIEWS: 9 PAGES: 1

									BEKA STADIALUX XP
Symmetrical 1kW/2kW floodlight



Specifications
SYMMETRICAL 1KW/2KW FLOODLIGHT DESIGNED FOR SPORTSFIELD AND FAÇADE
FLOODLIGHTING.

The luminaire shall consist of a LM6 high pressure die cast aluminium housing, designed to
operate a 1000W/2000W metal halide lamp.


The luminaire shall bear the SANS 60598-2-5 safety mark.

The luminaire shall have a degree of protection that complies with SANS 60598-2-5

Ingress protection: IP65

The IP ratings shall be certified by a SABS test report.


The housing shall be robustly constructed, weatherproof, hail proof, corrosion proof and
vandal resistant. It shall be manufactured from corrosion-resistant die cast aluminium. The
front glass covering the lamp compartment shall be heat and impact resistant.
The reflector system shall be manufactured from 99,98% super-pure anodized aluminium.
The luminaire shall be available in symmetrical narrow, medium and wide beam distribution.
The rear housing hinges open for lamp replacement. It shall be held closed with two
stainless steel clamps.
The superposed pulse type ignitor and connector block shall be housed in a high pressure
die cast aluminium housing. The control gear shall be mounted on a steel tray or in a cast
aluminium box, for the 1000W lamp a 230V +3%/-10% 50Hz single phase system and for
the 2000W lamp a 380/400V +3%/-10% 50Hz three phase system. All control gear
components shall be removable and bear the relevant SABS mark. All screws, bolts and
metal parts shall be stainless steel or anti-corrosion treated material. Mains connection on
the control gear tray shall be by means of a suitable screw terminal block with wire
clamping contact. The luminaire shall be power factor corrected to a minimum of 0,9.
Tapped control gear shall be available on request.
The stirrup shall be manufactured from 4mm x 80mm hot dipped galvanised steel. Holes
shall be provided for single or double bolt mounting. The stirrup shall be reversible for
suspended mounting. A stainless steel version is available on request.




1|Page

								
To top