"Unisys rSmartSource Adaptive v2 5 30 0 8 8"
Ranger 2.5.30 & CAPI 8.8 - Feature Enablement This version of Ranger & CAPI provide the following features: 1. Compatibility setting for Source Capture pre 2.4.4 and pre 126.96.36.199 code bases. 2. Single Feed mode when Double Feed Detection is disabled in Source Capture 3. Selective Messaging from CAPI for Ink related messages. 4. Application independent Franking. Verify the following files are in the install directory prior to installing the drivers 1. RangerForSmartSource_PVA_v188.8.131.52-8.8.0.exe 2. Setup.dat 3. TransportInfo.override.ini Here is base detail for enabling of each of the new features: 1. Ranger compatibility setting for Source Capture current code levels as well as 2.4.4.xx; pre 184.108.40.206; and 2.1.x code levels. a. Install the TransportInfo.override.ini file to the same location as the RangerForSmartSource_PVA_v220.127.116.11-8.8.0.exe b. What changed in the file [General] Model=SmartSource NOTE: When the Ranger installation script detects the TransportInfo.override.ini file in the same directory as the installation exe then Ranger will install the ini file in the proper directory. Don’t forget to put the setup.dat (Ranger license file) in the same directory as the installation exe before you run the install. 2. Single Feed mode when Double Feed Detection is disabled in Source Capture a. Modify the CapiOptions.ini file on the client workstation, adding the following parameter. 1. Located in c:\Documents and Settings\All Users\Application Data\Silver Bullet Technology\Ranger\SmartSource PVA\API Files 2. Optionally Use Supplied Sample [Fiserv DoubleDoc Mode] Enable=true MessageLine1=WARNING: Feeding was requested when double-document detection is disabled. Ranger 2.5.30 & CAPI 8.8 - Feature Enablement MessageLine2=A single document will be fed. To feed multiple items, enable the double-document detection check-box before feeding the next item. NOTE: When this option is enabled, turning off double-doc detection on Source Capture scan page will put the scanner into SINGLE FEED mode, until double-doc detection is re-enabled on Source Capture scan page. Ranger will display a user defined message along with an “OK” button. The default messages are: Line 1: “WARNING: Feeding was requested when double-document detection is disabled.” Line 2: “A single document will be fed. To feed multiple items, enable the double-document detection check-box before feeding the next item.” When the user selects the “OK” button, Ranger feeds a single item and then stop feeding automatically. 3. Selective Messaging from CAPI for Ink related messages. a. Modify the SmartSourceManager.ini file on the client workstation 1. Located in C:\SmartSource\Config 2. Optionally Use Supplied Sample [ExceptionHandling] EnableExceptionHandler=1 1 enables the handler, 0 turns it off b. Modify the errors.mdb file on the client workstation 1. Located in C:\SmartSource\bin 2. Optionally Use Supplied Sample Include only the messages you want to be displayed to end users. Supplied Sample is limited to only ink related messages. Ranger 2.5.30 & CAPI 8.8 - Feature Enablement In addition, this version of CAPI contains the following feature: 4. Franker Enablement independent of Source Capture application. a. Modify the device.ini file on the client workstation 1. Located in C:\SmartSource\bin 2. Use Supplied Sample [Franker] # The PresetFrank parameter determines whether franking decisions are controlled by the application, or whether every item will be franked. # 0 = Franking operation under application control (default) # 1 = Every document (except pages, i.e., documents longer than 9.5 inches on Adaptive) will be franked. PresetFrank=0 NOTE: Requires the SmartSource scanner has a physical franker. Control of this franker “always on” or “always off” feature is outside the control of Source Capture application. Source Capture does not require Franking.