Docstoc

Sfesifikasi D4K + Winch

Document Sample
Sfesifikasi D4K + Winch Powered By Docstoc
					                D 4 K LGP TRACK TYPE SPECIFICATIONS

1   Engine
    Engine Model                                          CAT C4.4 ACERT
    Power net                                             84 Hp

2   Weights
    Operating Weight - LGP                                18742 lb

3   Engine
    Power - Gross                                         92 hp
    Displacement                                          269 in3
    Caterpillar                                           84 hp
    ISO 9249                                              84 hp
    EEC 80/1269                                           84 hp
    SAE JI 349                                            84 hp
    Bore                                                  4,13 in
    Stroke                                                5 in

4   Transmission
    Drive Pumps                                                      2
    Track Motors                                                     2
    Relief valve settings                                 6911 psi
    Maximum travel speed - foorward                       5,6 mph
    Maximum travel speed - reverse                        6,2 mph

5   Service Refill Capacities
    Fuel Tank                                             51,5 gal
    Crankcase and filter                                  2,91 gal
    Final drives,LGP (each side)                          2,6 gal
    Colling system                                        5,92 gal
    Transmission/hydraulic tank                           15,7 gal

6   Hydraulic Controls
    Pump output                                           19,4 gal/min
    Relief valve setting                                  2988 psi

7   Standars
    ROPS                                                    Sae J397- Oct95, Sae JI040-
                                                           MAY94, ISO 3471-94, ISO 3164-
8   Final Drive
    Double - reduction planetary gear set
    Mounted independently of track frames to isolate
    them from machine weight and ground induced shock

9   Steering and Braking
    Full power turn
    Counterrotation
    Single lever sterering,speed and direction control
    Hydrostatic (dynamic) braking through machine drive
       System using transmission control lever

 10    Winch
       Weight                                    1345 lb
       Winch drive                               Hydrostatic
       Control                                   Hydraulic
       Speed                                     Variable
       Winch length                              27,76 in
       Overall width                             29,2 in
       Drum diameter                             10 in
       Drum width                                10,8 in
       Throat clearance                          6,75 in
       Rope diameter - recommended               0,63 in
       Rope diameter - optional                  0,75 in
       Drum capacity - recommended cable         371 ft
       Drum capacity - optional cable            256 ft
       Maximum line pull - bare drum             40000 lb
       Maximum line speed - full drum            25000 lb

 11    Ripper
       Type                                      Parallelogram
       Number of Shanks                                    3
       Maximum digging depth                     13,3 in
       Maximum reach at ground line              23,5 in
       Maximum ground clearance under tip        17,6 in
       Overall width                             67,3 in
       Height                                    6,5 in
       Weight                                    1222 lb

 12    Undercarriage
       Shoe width - LGP                          25 in
       Length of Track on ground - LGP           89 in
       Track Gauge - LGP                         68 in
       Ground contact area - LGP                 4425 in2
       Ground pressure - LGP                     4,24 psi

 13    Standars
       Fops                                      SAE J231 -JAN81, ISO 3449-92

 14    Blade
       Blade width LGP                           123,9 in
       Blade heigth LGP                          35,8 in
       Blade capacity LGP                        2,42 yd3
       Digging depth LGP                         23,2 in

Tambahan
Asuransi Alat Berat
GPS

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:0
posted:10/3/2012
language:Unknown
pages:2