At project closeout by RmxJd1HK

VIEWS: 0 PAGES: 11

									                                      SECTION 08710

                                    DOOR HARDWARE

PART 1 GENERAL

1.1   SECTION INCLUDES

      A.   Door Closers.

1.2   RELATED SECTIONS

      A.   Section 05100 - Structural Metal Framing: Door Frames.

      B.   Section 06100 - Rough Carpentry: Door Frames.

      C.   Section 08100 - Metal Doors and Frames.

      D.   Section 08200 - Wood and Plastic Doors.

      E.   Section 16100 - Wiring Methods: Electric lock control wiring.

1.3   REFERENCES

      A.   ANSI A156.12 - American National Standard for Interconnected Locks.

      B.   ANSI A156.13 - American National Standard for Mortise Locks and Latches Series
           1000.

      C.   ANSI A156.2 - American National Standard for Bored and Preassembled Locks and
           Latches.

      D.   Underwriters Laboratories (UL). - Fire Resistance Directory.

1.4   SUBMITTALS

      A.   Submit under provisions of Section 01300.



                                           08710-1
      B.   Product Data: Manufacturer's data sheets on each product to be used, including:
           1.   Preparation instructions and recommendations.
           2.   Storage and handling requirements and recommendations.
           3.   Installation methods.

      C.   Shop Drawings: Manufacturer's approved shop drawings are required detailing the
           application of each product specified.

      D.   Selection Samples: For each finish product specified, two full size samples
           representing manufacturer's full range of available colors and patterns.

      E.   Verification Samples: For each finish product specified, two full size samples,
           representing actual product, color, and patterns.

1.5   QUALITY ASSURANCE

      A.   Manufacturer Qualifications: All equipment specified in this section will be provided
           by a single manufacturer with a minimum of ten (10) years experience
           manufacturing door hardware.

      B.   Installer Qualifications: All products listed in this section are to be installed by a
           single installer with a minimum of five (5) years demonstrated experience in
           installing products of the same type and scope as specified.

      C.   Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and
           application workmanship.
           1.     Finish areas designated by Architect.
           2.     Do not proceed with remaining work until workmanship, color, and sheen are
                  approved by Architect.
           3.     Refinish mock-up area as required to produce acceptable work.

1.6   DELIVERY, STORAGE, AND HANDLING

      A.   Store products in manufacturer's unopened packaging until ready for installation.

      B.   Store and dispose of solvent-based materials, and materials used with
           solvent-based materials, in accordance with requirements of local authorities having
           jurisdiction.

1.7   PROJECT CONDITIONS

      A.   Maintain environmental conditions (temperature, humidity, and ventilation) within
           limits recommended by manufacturer for optimum results. Do not install products
           under environmental conditions outside manufacturer's absolute limits.

1.8   WARRANTY

      A.   At project closeout, provide to the Owner or Owner's Representative an executed
           copy if the manufacturer's Limited Warranty against Manufacturing Defects.
           1.     Duration: Ten (10) years.

PART 2 PRODUCTS

2.1   MANUFACTURERS

      A.   Acceptable Manufacturer: Schlage Lock Co., Div. of Ingersoll Rand, which is located
           at: 11819 N. Pennsylvania St. ; Carmel, IN 46032; Toll Free Tel: 877-671-7011;
           Email: request info (securitemail_Lenexa@ingerrand.com); Web:



                                             08710-2
            w3.securitytechnologies.com/Products/mechanical_locks/Pages/default.aspx

      B.    Substitutions: Not permitted.

      C.    Requests for substitutions will be considered in accordance with provisions of
            Section 01600.

2.2   Tubular Locks

      A.    S-Series Light / Medium Duty Tubular Locks: Grade 2, light traffic lockset certified to
            ANSI A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.    Handing: Non-Handed except Flair lever styles.
            2.    Chassis: Zinc plated steel.
            3.    Lock Functions: 2 non-keyed and 4 keyed functions available. Function as
                  noted in the Hardware Schedule.

      B.    S200-Series Light / Medium Duty Tubular Interconnected Locks: Grade 2, medium
            traffic lockset certified to ANSI A156.12-2005, series 5000. Exceeds 400,000 cycles.
            1.       Handing: Non-Handed except Flair lever styles.
            2.       Chassis: Zinc plated steel.
            3.       Lock Functions: 1 non-keyed and 4 keyed functions available. Function as
                     noted in the Hardware Schedule.

2.3   Commercial Cylindrical Locks

      A.    A-Series Standard Cylindrical Locks: Grade 2, medium traffic lockset certified to
            ANSI A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.    Handing: Keyed functions are reversible. Non-keyed functions are not
                  handed.
            2.    Chassis: Zinc plated steel.
            3.    Lock Functions: 5 non-keyed and 6 keyed functions available. Function as
                  noted in the Hardware Schedule.

      B.    H-Series Cylindrical Interconnected Entrance Locks: Medium traffic lockset ANSI
            certified. Exceeds 400,000 cycles.
            1.      Handing: Field reversible.
            2.      Chassis: Zinc plated steel.
            3.      Lock Functions: 1 non-keyed and 4 keyed functions available. Function as
                    noted in the Hardware Schedule.

      C.    AL-Series Heavy Duty Locks: Grade 2, medium traffic lockset certified to ANSI
            A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.   Handing: Keyed functions are reversible. Non-keyed functions are not
                 handed.
            2.   Chassis: Zinc plated steel.
            3.   Lock Functions: 5 non-keyed and 5 keyed functions available. Function as
                 noted in the Hardware Schedule.

      D.    D-Series Extra Heavy Duty Commercial Locks: Grade 1, High traffic lockset certified
            to ANSI A156.2-2003, series 4000. Exceeds 800,000 cycles.
            1.    Handing: Keyed functions are reversible. Non-keyed functions are not
                  handed.
            2.    Chassis: Zinc plated steel.

      E.    ND-Series Extra Heavy Duty Commercial Locks: Grade 1, heavy-duty traffic lockset
            certified to ANSI A156.2-2003, series 4000. Exceeds 800,000 cycles.
            1.      Handing: Keyed functions are reversible. Non-keyed functions are not



                                            08710-3
                   handed.
            2.     Chassis: Zinc plated steel.
            3.     Lock Functions: 4 non-keyed, 21 keyed and 6 electrified functions available.
                   Function as noted in the Hardware Schedule.

2.4   Residential Cylindrical Locks

      A.    FA-Series Standard Cylindrical Locks: Grade 2, medium traffic lockset certified to
            ANSI A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.   Handing: Field Reversible.
            2.   Chassis: Zinc plated steel.

      B.    F-Series Standard Cylindrical Locks: Grade 2, medium traffic lockset certified to
            ANSI A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.    Handing: Field Reversible.
            2.    Chassis: Zinc plated steel.

      C.    J-Series Standard Cylindrical Locks: Grade 2, medium traffic lockset certified to
            ANSI A156.2-2003, series 4000. Exceeds 400,000 cycles.
            1.    Handing: Field Reversible.
            2.    Chassis: Zinc plated steel.

2.5   Mortise Locks

      A.    L-Series Extra Heavy Duty Commercial Locks: Grade 1, heavy-duty traffic lockset
            certified to ANSI A156.13-2005, series 1000. Exceeds 1,000,000 cycles.
            1.      Handing: L9000 are reversible. L400 are not handed.
            2.      Chassis: Zinc plated steel.
            3.      Lock Functions: 53 non-keyed and keyed functions and 4 electrified functions
                    available. Function as noted in the Hardware Schedule.

2.6   Deadbolts

      A.    B-Series Grade 2 High Traffic Commercial Deadbolts: Grade 2, high traffic deadbolt
            certified to ANSI A156.2-2003, series 1000. Exceeds 1,000,000 cycles.
            1.      Handing: B250 Series are reversible. B-Series are not handed.
            2.      Chassis: Zinc plated steel.
            3.      Lock Functions: 53 non-keyed and keyed functions and 4 electrified functions
                    available. Function as noted in the Hardware Schedule.

      B.    B-Series Heavy Duty Commercial Deadbolts: Grade 1 heavy-duty deadbolt certified
            to ANSI A156.13-2005, series 1000. Exceeds 1,000,000 cycles.
            1.    Handing: B250 Series are reversible. B-Series are not handed.
            2.    Chassis: Zinc plated steel.
            3.    Lock Functions: 53 non-keyed and keyed functions and 4 electrified functions
                  available. Function as noted in the Hardware Schedule.

PART 3 EXECUTION

3.1   EXAMINATION

      A.    Do not begin installation until substrates have been properly prepared.

      B.    If substrate preparation is the responsibility of another installer, notify Architect of
            unsatisfactory preparation before proceeding.

3.2   PREPARATION



                                              08710-4
      A.   Clean surfaces thoroughly prior to installation.

      B.   Prepare surfaces using the methods recommended by the manufacturer for
           achieving the best result for the substrate under the project conditions.

3.3   INSTALLATION

      A.   Install in accordance with manufacturer's instructions.

3.4   PROTECTION

      A.   Protect installed products until completion of project.

      B.   Touch-up, repair or replace damaged products before Substantial Completion.

3.5   HARDWARE SCHEDULE

      A.   Tubular Locks
           1.    Door Number: _____.
           2.    Ordering Number: __________________________.
           3.    Device: S-Series Light / Medium Duty Tubular Locks.
                 a.    Function: ANSI F75 - Non-keyed passage latch
                 b.    Function: ANSI F76 - Non-keyed bath / bedroom privacy lock.
                 c.    Function: ANSI F81 - Entrance lock.
                 d.    Function: ANSI F84 - Classroom lock.
                 e.    Function: ANSI F86 - Storeroom lock.
                 f.    Function: Single dummy trim.
                 g.    Lever Style: Jupiter.
                 h.    Lever Style: Neptune.
                 i.    Lever Style: Saturn.
                 j.    Lever Style: Flair.
                 k.    Cylinder/Keying: Standard.
                 l.    Cylinder/Keying: Interchangeable Core.
                 m.    Finish: Plated - BHMA 605 - Bright Brass.
                 n.    Finish: Plated - BHMA 606 - Satin Brass.
                 o.    Finish: Plated - BHMA 609 - Antique Brass.
                 p.    Finish: Plated - BHMA 612 - Satin Bronze.
                 q.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
                 r.    Finish: Plated - BHMA 619 - Satin Nickel.
                 s.    Finish: Plated - BHMA 625 - Bright Chrome.
                 t.    Finish: Plated - BHMA 626 - Satin Chrome.
           4.    Device: S200-Series Light / Medium Duty Tubular Interconnected Locks.
                 a.    Function: ANSI F95 - Entrance, single locking.
                 b.    Function: ANSI F97 - Entrance, double locking.
                 c.    Function: ANSI F98 - Storeroom lock.
                 d.    Function: Classroom lock.
                 e.    Function: Single dummy trim.
                 f.    Lever Style: Jupiter.
                 g.    Lever Style: Neptune.
                 h.    Lever Style: Saturn.
                 i.    Lever Style: Flair.
                 j.    Lever Style: Meteor.
                 k.    Cylinder/Keying: Standard.
                 l.    Cylinder/Keying: Interchangeable Core.
                 m.    Finish: Plated - BHMA 605 - Bright Brass.
                 n.    Finish: Plated - BHMA 606 - Satin Brass.
                 o.    Finish: Plated - BHMA 609 - Antique Brass.



                                            08710-5
           p.    Finish: Plated - BHMA 612 - Satin Bronze.
           q.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
           r.    Finish: Plated - BHMA 619 - Satin Nickel.
           s.    Finish: Plated - BHMA 625 - Bright Chrome.
           t.    Finish: Plated - BHMA 626 - Satin Chrome.

B.   Commercial Cylindrical Locks
     1.  Door Number: _____.
     2.  Ordering Number: __________________________.
     3.  Device: A-Series Standard Cylindrical Locks.
         a.     Function: ANSI F75 - Non-keyed passage latch
         b.     Function: ANSI F76 - Non-keyed bath / bedroom privacy lock.
         c.     Function: ANSI F77s - Non-keyed patio lock.
         d.     Function: ANSI F79 - Communicating lock.
         e.     Function: ANSI F84 - Classroom lock.
         f.     Function: ANSI F86 - Storeroom lock.
         g.     Function: ANSI F93 - Hotel/Motel lock.
         h.     Function: ANSI F109 - Entrance lock.
         i.     Function: Communicating lock with blank plate.
         j.     Function: Exit lock.
         k.     Function: Single dummy trim.
         l.     Lever Style: Georgian.
         m.     Knob Style: Orbit.
         n.     Knob Style: Plymouth.
         o.     Lever Style: Tulip.
         p.     Lever Style: Levon.
         q.     Cylinder/Keying: Standard.
         r.     Cylinder/Keying: Interchangeable Core.
         s.     Finish: Plated - BHMA 605 - Bright Brass.
         t.     Finish: Plated - BHMA 606 - Satin Brass.
         u.     Finish: Plated - BHMA 609 - Antique Brass.
         v.     Finish: Plated - BHMA 612 - Satin Bronze.
         w.     Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
         x.     Finish: Plated - BHMA 625 - Bright Chrome.
         y.     Finish: Plated - BHMA 626 - Satin Chrome.
         z.     Finish: Plated - BHMA 629 - Bright Stainless Steel.
         aa.    Finish: Plated - BHMA 630 - Satin Stainless Steel.
         bb.    Finish: Plated - BHMA 643e - Aged Bronze.
     4.  Device: H-Series Cylindrical Interconnected Entrance Locks.
         a.     Function: ANSI F95 - Entrance, single locking.
         b.     Function: ANSI F97 - Entrance, double locking.
         c.     Function: ANSI F100 - Hotel/Motel lock.
         d.     Function: ANSI H180 - Storeroom lock.
         e.     Function: Inside half dummy trim.
         f.     Knob Style: Orbit.
         g.     Knob Style: Plymouth.
         h.     Lever Style: Levon.
         i.     Cylinder/Keying: Standard.
         j.     Cylinder/Keying: Interchangeable Core.
         k.     Finish: Plated - BHMA 605 - Bright Brass.
         l.     Finish: Plated - BHMA 606 - Satin Brass.
         m.     Finish: Plated - BHMA 609 - Antique Brass.
         n.     Finish: Plated - BHMA 610 - Bright Brass, Blackened.
         o.     Finish: Plated - BHMA 611 - Bright Bronze.
         p.     Finish: Plated - BHMA 612 - Satin Bronze.
         q.     Finish: Plated - BHMA 613 - Oil Rubbed Bronze.



                                  08710-6
     r.    Finish: Plated - BHMA 616 - Antique Bronze.
     s.    Finish: Plated - BHMA 625 - Bright Chrome.
     t.    Finish: Plated - BHMA 626 - Satin Chrome.
5.   Device: AL-Series Heavy Duty Locks.
     a.    Function: ANSI F75 - Non-keyed passage latch
     b.    Function: ANSI F76 - Non-keyed bath / bedroom privacy lock.
     c.    Function: ANSI F82 - Entrance/office lock.
     d.    Function: ANSI F84 - Classroom lock.
     e.    Function: ANSI F86 - Storeroom lock.
     f.    Function: ANSI F93 - Facility restroom lock.
     g.    Function: ANSI F103 - Entrance lock.
     h.    Function: Exit lock.
     i.    Function: Hospital privacy lock.
     j.    Function: Single dummy trim.
     k.    Lever Style: Jupiter.
     l.    Lever Style: Neptune.
     m.    Lever Style: Saturn.
     n.    Lever Style: Omega.
     o.    Cylinder/Keying: Standard.
     p.    Cylinder/Keying: Full size interchangeable Core.
     q.    Cylinder/Keying: Small format interchangeable Core.
     r.    Finish: Plated - BHMA 605 - Bright Brass.
     s.    Finish: Plated - BHMA 606 - Satin Brass.
     t.    Finish: Plated - BHMA 609 - Antique Brass.
     u.    Finish: Plated - BHMA 612 - Satin Bronze.
     v.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
     w.    Finish: Plated - BHMA 619 - Satin Nickel.
     x.    Finish: Plated - BHMA 625 - Bright Chrome.
     y.    Finish: Plated - BHMA 626 - Satin Chrome.
     z.    Finish: Plated - BHMA 626AM - Satin Chrome with antimicrobial
           coating.
     aa.   Finish: Plated - BHMA 643e - Aged Bronze.
6.   Device: D-Series Extra Heavy Duty Commercial Locks.
     a.    Function: ANSI F75 - Non-keyed passage latch
     b.    Function: ANSI F76 - Non-keyed bath / bedroom privacy lock.
     c.    Function: ANSI F82 - Entrance/office lock.
     d.    Function: ANSI F84 - Classroom lock.
     e.    Function: ANSI F86 - Storeroom lock.
     f.    Function: ANSI F93 - Facility restroom lock.
     g.    Function: ANSI F103 - Entrance lock.
     h.    Function: Exit lock.
     i.    Function: Hospital privacy lock.
     j.    Function: Single dummy trim.
     k.    Knob Style:
     l.    Knob Style:
     m.    Knob Style:
     n.    Cylinder/Keying: Standard.
     o.    Cylinder/Keying: Full size interchangeable Core.
     p.    Cylinder/Keying: Small format interchangeable Core.
     q.    Finish: Plated - BHMA 605 - Bright Brass.
     r.    Finish: Plated - BHMA 606 - Satin Brass.
     s.    Finish: Plated - BHMA 612 - Satin Bronze.
     t.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
     u.    Finish: Plated - BHMA 619 - Satin Nickel.
     v.    Finish: Plated - BHMA 625 - Bright Chrome.
     w.    Finish: Plated - BHMA 626 - Satin Chrome.



                            08710-7
          x.    Finish: Plated - BHMA 643e - Aged Bronze.
     7.   Device: ND-Series Extra Heavy Duty Commercial Locks.
          a.    Function: ANSI F75 - passage latch
          b.    Function: ANSI F76 - bath / bedroom privacy lock.
          c.    Function: ANSI F82 - Entrance/office lock.
          d.    Function: ANSI F84 - Classroom lock.
          e.    Function: ANSI F86 - Storeroom lock.
          f.    Function: ANSI F86 - Institution lock.
          g.    Function: ANSI F88 - Vestibule lock.
          h.    Function: ANSI F89 - Exit lock.
          i.    Function: ANSI F90 - Corridor lock.
          j.    Function: ANSI F91 - Store lock.
          k.    Function: ANSI F109 - Entrance lock.
          l.    Function: Hospital privacy lock.
          m.    Function: Single dummy trim.
          n.    Function: Electrically locked - Fail safe (Keyed both sides).
          o.    Function: Electrically locked - Fail safe (Keyed one side).
          p.    Function: Electrically locked - Fail safe (Non-keyed).
          q.    Function: Electrically unlocked - Fail secure (Keyed both sides).
          r.    Function: Electrically unlocked - Fail secure (Keyed one side).
          s.    Function: Electrically unlocked - Fail secure (Non-keyed).
          t.    Function: Exit lock.
          u.    Function: Faculty restroom lock.
          v.    Function: Classroom security lock.
          w.    Lever Style: Athens.
          x.    Lever Style: Sparta.
          y.    Lever Style: Rhodes.
          z.    Lever Style: Tubular.
          aa.   Lever Style: Omega.
          bb.   Cylinder/Keying: Standard.
          cc.   Cylinder/Keying: Full size interchangeable Core.
          dd.   Cylinder/Keying: Small format interchangeable Core.
          ee.   Finish: Plated - BHMA 605 - Bright Brass.
          ff.   Finish: Plated - BHMA 606 - Satin Brass.
          gg.   Finish: Plated - BHMA 612 - Satin Bronze.
          hh.   Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
          ii.   Finish: Plated - BHMA 619 - Satin Nickel.
          jj.   Finish: Plated - BHMA 625 - Bright Chrome.
          kk.   Finish: Plated - BHMA 626 - Satin Chrome.
          ll.   Finish: Plated - BHMA 643e - Aged Bronze.

C.   Residential Cylindrical Locks.
     1.    Door Number: _____.
     2.    Ordering Number: __________________________.
     3.    Device: FA-Series Standard Cylindrical Locks.
           a.     Handle Style - Exterior: Sutton.
           b.     Handle Style - Exterior: Monticello.
           c.     Handle Style - Exterior: Wakefield.
           d.     Handle Style - Exterior: Monaco.
           e.     Handle Style - Exterior: Florence.
           f.     Handle Style - Exterior: Venice.
           g.     Lever Style - Interior: St. Annes.
           h.     Lever Style - Interior: Champagne.
           i.     Lever Style - Interior: Merano.
           j.     Lever Style - Interior: Callington.
           k.     Knob Style - Interior: Andover.



                                   08710-8
     l.    Knob Style - Interior: Danbury.
     m.    Finish: Plated - BHMA 505 - Bright Brass with PVD Finish.
     n.    Finish: Plated - BHMA 605 - Bright Brass.
     o.    Finish: Plated - BHMA 609 - Antique Brass.
     p.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
     q.    Finish: Plated - BHMA 619 - Satin Nickel.
     r.    Finish: Plated - BHMA 620 - Antique Pewter.
     s.    Finish: Plated - BHMA 621 - Distressed Nickel.
     t.    Finish: Plated - BHMA 622 - Matte Black.
     u.    Finish: Plated - BHMA 625 - Bright Chrome.
     v.    Finish: Plated - BHMA 626 - Satin Chrome.
     w.    Finish: Plated - BHMA 630 - Satin Stainless Steel.
     x.    Finish: Plated - BHMA 716 - Aged Bronze.
4.   Device: F-Series Standard Cylindrical Locks.
     a.    Handle Style - Exterior: Bowman.
     b.    Handle Style - Exterior: Camelot.
     c.    Handle Style - Exterior: Century.
     d.    Handle Style - Exterior: Parthenon.
     e.    Handle Style - Exterior: Plymouth.
     f.    Handle Style - Exterior: Addison.
     g.    Lever Style - Interior: Flair.
     h.    Lever Style - Interior: Avanti.
     i.    Lever Style - Interior: Avilla.
     j.    Lever Style - Interior: Latitude.
     k.    Lever Style - Interior: Accent.
     l.    Lever Style - Interior: Manhattan.
     m.    Lever Style - Interior: Elan.
     n.    Lever Style - Interior: Jazz.
     o.    Knob Style - Interior: Plymouth.
     p.    Knob Style - Interior: Bell.
     q.    Knob Style - Interior: Sienna.
     r.    Knob Style - Interior: Orbit.
     s.    Knob Style - Interior: Georgian.
     t.    Finish: Plated - BHMA 505 - Bright Brass with PVD Finish.
     u.    Finish: Plated - BHMA 605 - Bright Brass.
     v.    Finish: Plated - BHMA 609 - Antique Brass.
     w.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
     x.    Finish: Plated - BHMA 619 - Satin Nickel.
     y.    Finish: Plated - BHMA 620 - Antique Pewter.
     z.    Finish: Plated - BHMA 621 - Distressed Nickel.
     aa.   Finish: Plated - BHMA 622 - Matte Black.
     bb.   Finish: Plated - BHMA 625 - Bright Chrome.
     cc.   Finish: Plated - BHMA 626 - Satin Chrome.
     dd.   Finish: Plated - BHMA 630 - Satin Stainless Steel.
     ee.   Finish: Plated - BHMA 716 - Aged Bronze.
5.   Device: J-Series Standard Cylindrical Locks.
     a.    Handle Style - Exterior: Barcelona.
     b.    Handle Style - Exterior: Paris.
     c.    Lever Style - Interior: La Salle.
     d.    Lever Style - Interior: Marin.
     e.    Lever Style - Interior: Torino.
     f.    Lever Style - Interior: Solstice.
     g.    Lever Style - Interior: Dover.
     h.    Lever Style - Interior: Seville.
     i.    Knob Style - Interior: Corona.
     j.    Knob Style - Interior: Stratus.



                             08710-9
           k.    Knob Style - Interior: Byron.
           l.    Deadbolt: JD-60 Single Cylinder
           m.    Deadbolt: JD-62 Double Cylinder
           n.    Deadbolt: JD-80 One-sided deadbolt.
           o.    Deadbolt: JD-81 One-sided deadbolt with exterior plate.
           p.    Finish: Plated - BHMA 505 - Bright Brass with PVD Finish.
           q.    Finish: Plated - BHMA 605 - Bright Brass.
           r.    Finish: Plated - BHMA 609 - Antique Brass.
           s.    Finish: Plated - BHMA 613 - Oil Rubbed Bronze.
           t.    Finish: Plated - BHMA 619 - Satin Nickel.
           u.    Finish: Plated - BHMA 620 - Antique Pewter.
           v.    Finish: Plated - BHMA 621 - Distressed Nickel.
           w.    Finish: Plated - BHMA 622 - Matte Black.
           x.    Finish: Plated - BHMA 625 - Bright Chrome.
           y.    Finish: Plated - BHMA 626 - Satin Chrome.
           z.    Finish: Plated - BHMA 630 - Satin Stainless Steel.
           aa.   Finish: Plated - BHMA 716 - Aged Bronze.

D.   Mortise Locks
     1.    Door Number: _____.
     2.    Ordering Number: __________________________.
     3.    Device: L-Series Extra Heavy Duty Commercial Locks.
           a.    Function: _______________________________.
           b.    Lever Style: danmark 615.
           c.    Lever Style: danmark 621.
           d.    Lever Style: danmark 640.
           e.    Lever Style: danmark 650.
           f.    Lever Style: danmark 660.
           g.    Lever Style: danmark 690.
           h.    Lever Style: danmark 695.
           i.    Lever Style: danmark 696.
           j.    Lever Style: 01.
           k.    Lever Style: 02.
           l.    Lever Style: 03.
           m.    Lever Style: 05.
           n.    Lever Style: 06.
           o.    Lever Style: 07.
           p.    Lever Style: 17.
           q.    Lever Style: 18.
           r.    Lever Style: 93.
           s.    Lever Style: Omega.
           t.    Lever Style: ASTI.
           u.    Lever Style: Merano.
           v.    Lever Style: St. Annes.
           w.    Lever Style: Accent.
           x.    Knob Style: Orbit.
           y.    Knob Style: Plymouth.
           z.    Cylinder/Keying: Standard.
           aa.   Cylinder/Keying: Interchangeable Core.
           bb.   Finish: Plated - BHMA 605 - Bright Brass.
           cc.   Finish: Plated - BHMA 606 - Satin Brass.
           dd.   Finish: Plated - BHMA 609 - Antique Brass.
           ee.   Finish: Plated - BHMA 610 - Bright Brass, Blackened.
           ff.   Finish: Plated - BHMA 611 - Bright Bronze.
           gg.   Finish: Plated - BHMA 612 - Satin Bronze.
           hh.   Finish: Plated - BHMA 613 - Oil Rubbed Bronze.



                                  08710-10
           ii.   Finish: Plated - BHMA 616 - Antique Bronze.
           jj.   Finish: Plated - BHMA 619 - Satin Nickel.
           kk.   Finish: Plated - BHMA 625 - Bright Chrome.
           ll.   Finish: Plated - BHMA 626 - Satin Chrome.
           mm.   Finish: Plated - BHMA 629 - Bright Stainless Steel.
           nn.   Finish: Plated - BHMA 630 - Satin Stainless Steel.
           oo.   Finish: Plated - BHMA 716 - Aged Bronze.

E.   Deadbolts
     1.   Door Number: _____.
     2.   Ordering Number: __________________________.
     3.   Device/Function: B250PD - Single cylinder deadlatch.
     4.   Device/Function: B252PD - Double cylinder deadlatch.
     5.   Device/Function: B560P - Single cylinder deadbolt.
     6.   Device/Function: B562P - Double cylinder deadbolt.
     7.   Device/Function: B563P - Classroom deadbolt.
     8.   Device/Function: B571 - Door bolt occupancy indicator.
     9.   Device/Function: B580 - Door bolt.
     10.  Device/Function: B581 - Door bolt with trim.
     11.  Device/Function: B561P - Cylinder only x blank plate deadbolt.
     12.  Device/Function: B660P - Single cylinder deadbolt.
     13.  Device/Function: B662P - Double cylinder deadbolt.
     14.  Device/Function: B663P - Classroom deadbolt.
     15.  Device/Function: B680 - Door bolt.
     16.  Device/Function: B664P - Cylinder only deadbolt.
     17.  Device/Function: B661P - Cylinder only x blank plate deadbolt.
     18.  Device/Function: B760P - Single cylinder deadbolt.
     19.  Device/Function: B762P - Double cylinder deadbolt.
     20.  Device/Function: B763P - Classroom deadbolt.
     21.  Device/Function: B764P - Cylinder only deadbolt.
     22.  Device/Function: B761P - Cylinder only x blank plate deadbolt.
     23.  Device/Function: B860P - Single cylinder deadbolt.
     24.  Device/Function: B862P - Double cylinder deadbolt.
     25.  Device/Function: B863P - Classroom deadbolt.
     26.  Device/Function: B864P - Cylinder only deadbolt.
     27.  Device/Function: B861P - Cylinder only x blank plate deadbolt.

                              END OF SECTION




                                   08710-11

								
To top