INSTRUCTOR SYLLABUS FOR by rcvqFJ

VIEWS: 0 PAGES: 3

									                    SAMPLE MASTER LESSON PLAN




          MASTER LESSON PLAN
                  FOR
       500D MAINTENANCE TRAINING
                COURSE




Revision May 2003
                        SAMPLE MASTER LESSON PLAN



SUBJECTS:


I.       Powertrain                                                        4.0 Hours

A.   General
B.   Overrunning Clutch
C.   Main Transmission Drive Shaft
D.   Main Transmission
E.   Oil Cooler Blower Assembly
F.   Main Rotor Drive Shaft
G.   Tail rotor drive shaft
H.   Fan Interconnect Shaft
I.   Fan Driveshaft
J.   Fan Transmission




LEARNING OBJECTIVES:

At the end of the course the Technician will be able to:

        Demonstrate the skill and knowledge required to safely perform maintenance tasks using
         the suite of MD500D maintenance training devices, in accordance with safety and
         performance standards.

        Apply:
         1. Applicable reference manual

        Explain:
         1. Safety precautions to be observed when working on or near the aircraft
         and its systems.
         2. Locations of principal components.
         3. Normal functions of each major system, including terminology and nomenclature.
         4. Applicable system operations and maintenance practices.
         5. Procedure for carrying tasks associated with the routine servicing of the aircraft
         and its system.

        Carry out functional checks applicable to system, engine, and components.




Revision May 2003
                        SAMPLE MASTER LESSON PLAN




PRACTICAL EXERCISES:

Exercise 1:
    Removal, installation and shimming of the overrunning clutch (subassembly) and
        coupling
Exercise 2:
    Removal and installation of the tail rotor driveshaft and gearbox
Exercise 3:
    Oil cooler blower installation and belt tension check

Note: all students must complete the same exercises.


RESOURCES AND EQUIPMENT:

       Instructor notes
       Computer Based Training (CBT) Powerpoint CD (500D Maintenance Training)
       Practical exercises, Section III, Powertrain
       HMI (RMM) - IPL
       Training aids (as applicable)




COMPLETION STANDARDS:

Exam:            500D #1 (50 question/multiple choice/closed book) - 70% pass required
Practical:       Practical exercise manual, Section III (Powertrain) - pass/fail grading



VALIDATION:

This lesson plan has been reviewed to ensure it contains the most current and up-to-date
technical information – and has been validated as of this date.


____________________________________                             _____________________
Developed by:                                                    Date:



____________________________________                             _____________________
Validated by:                                                    Date:


____________________________________                             _____________________
Approved by: (PRT)                                               Date:




Revision May 2003

								
To top