Docstoc

MAN-ELE Annual_Instr_Pgm_Review 2012

Document Sample
MAN-ELE Annual_Instr_Pgm_Review 2012 Powered By Docstoc
					NORCO COLLEGE ANNUAL INSTRUCTIONAL PROGRAM REVIEW
   Unit: Manufacturing Technology, Machine Shop Technology, Supply
             Chain Technology and Electronics Technology
 Please give the full title of the discipline or department. You may submit as a discipline or department as is easiest for your unit

                                     Contact Person: Paul Van Hulle
                                      Due in draft: March 15, 2012
                                      Final drafts due: June 1, 2012
                            Please send an electronic copy to the Vice President; Academic Affairs
                                         Norco: Diane.Dieckmeyer@norcocollege.edu
                                      If you are CTE: Kevin.Fleming@norcocollege.edu




                                               Form Last Revised: December 2011

                                                         Norco College
           Web Resources: http://www.rccd.edu/administration/educationalservices/ieffectiveness/Pages/ProgramReview.aspx
                                                                  1
                                            Annual Instructional Program Review Update
                                                                         Instructions
*Please retain this information for your discipline’s/department’s use (or forward to your chair).

The Annual Self-Study is conducted by each unit on each college and consists of an analysis of changes within the unit as well as significant new resource needs
for staff, resources, facilities, and equipment. It should be submitted in draft every year by March 15th (or the first working day following the 15th), with final
drafts due on June 1, in anticipation of budget planning for the fiscal year, which begins July 1 of the following calendar year.

Extensive data sets have been distributed to all Department Chairs and are linked to the Program Review website (password 11111). Chairs have received training
on the use of these data sets. Please consult with your Department Chair or Raj Bajaj for assistance interpreting the data relevant to your discipline. Note that you
are only required to mention data relevant to your analysis or requests. Should you wish assistance with research analysis please fill out the form at
http://academic.rcc.edu/ir/requestform.html and you will be contacted to schedule a time to discuss analysis of your data. You may also request a labor market
analysis using this form.

The questions on the subsequent pages are intended to assist you in planning for your unit.

The forms that follow are separated into pages for ease of distribution to relevant subcommittees. Please keep the pages separated if possible (though part of the
same electronic file), with the headers as they appear, and be sure to include your unit, contact person (this may change from topic to topic) and date on each
page submitted. Don’t let formatting concerns slow you down. If you have difficulty with formatting, Nicole C. Ramirez can adjust the document for you.
Simply add responses to those questions that apply and forward the document to nicole.ramirez@norcocollege.edu with a request to format it appropriately.

If you cannot identify in which category your requests belong or if you have complex-funding requests please schedule an appointment with your college’s Vice
President for Business Services right away. They will assist you with estimating the cost of your requests. For simple requests such as the cost of a staff member,
please e-mail your Vice President. It is vital to include cost estimates in your request forms. Each college uses its own prioritization system. Inquiries regarding
that process should be directed to your Vice President.


        Norco:          VP Business Services             951-372-7157




                                                                                 2
                                                                        Mission
Norco College provides educational programs, services, and learning environments for a diverse community. We equip our students with the knowledge and
skills to attain their goals in higher, career/technical, and continuing education; workforce development; and personal enrichment. To meet the evolving
community needs, Norco College emphasizes the development of technological programs. As a continuing process we listen to our community and respond to
its needs while engaging in self-examination, learning outcome assessment, ongoing dialogue, planning and improvement.




                                                                         Vision
Norco College is a dynamic center for learning, student success, cultural enrichment, and community development and is an innovative leader in providing
relevant, accessible, and affordable educational programs.


                                                     Goals and Strategies 2008-2012

Goal 1: Increase Student Retention, Persistence, and Success

1. Norco College will reduce its first-semester attrition rate from 48% to 42% in three years; and to 38% in five years.
2. Norco College will reduce its first-year attrition rate from 64% to 58% in three years; and to 52% in five years.
3. Norco College will increase the percentage of students who declare degree and/or transfer as their educational goal that compete a Student Educational Plan
   (SEP) to 25% in three years and 50% in five years.


Goal 2: Improve the Quality of Student Life

1. Norco College will increase the number of students who report spending more than six hours per week on campus (as reported on the CCSEQ*) from
   13.6% to 20% by 2010 and 25% by 2012.
2. Norco College will increase attendance at student club or organization meetings (as reported on the CCSEQ) from 29.1% to 35% by 2010 and to 40% by
   2012.
3. Norco College will increase the rate of participation in a campus projected or event sponsored by a student organization or club (as reported on the CCSEQ)
   from 22.1% to 28% by 2010 and to 34% by 2012.
4. Norco College will increase the rate of attendance at school plays, dances, concerts, and theatre productions (as reported on the CCSEQ) from 31.3% to
   36% by 2010 and to 41% by 2012.
5. Norco College will increase the rate of participation in athletics and recreation (as reported on the CCSEQ) from 16.2% to 21% by 2010 and to 26% by
    2012.
6. Norco College will increase the rate of participation in a student group or club-sponsored project or event off-campus (as reported on the CCSEQ) from
                                                                            3
   18.6% to 24% by 2010 and to 29% by 2012.

Goal 3: Increase Student Access

1. Norco College will achieve an enrollment growth target of 3.8% annually until 2024 and then 3% thereafter until 2038.
2. Norco College will work towards achieving and maintaining the racial/ethnic distribution of faculty, staff, and students that is representative of the
   population of [its] Riverside Community College District service area.
3. Norco College will expand access to its programs and services on both the Norco campus as well as in the south Corona area. Towards this end, the
   College will establish a south Corona educational center by 2013 and enroll 1,000 FTES at the center by 2018.
4. Norco College will work with the city of Norco to approve and construct a roadway providing southerly ingress and egress to the Norco campus.
5. Norco College will maintain its current student-faculty ratio.



Goal 4: Enhance Academic Programs and the Learning Environment to meet Student and Community Needs

1. Eighty percent (80%) of the programs at Norco College will be self sufficient—with students being able to complete them by taking courses only at Norco
   College—in three years; and 100% will be self-sufficient in five years.
2. Norco will make steady progress—through adding courses in current programs, through carefully adding additional programs, through more aggressive
   marketing, and through having more students complete Student Educational Plans—in closing the gap between its current students’ profile, as defined by
   students’ educational goals, and the 40%-40%-20% distribution (transfer-career/technical-personal enrichment).
3. By 2012, 20% of the library collection will be made up of materials published after 2000, and 50% of the volumes will have been selected by Norco
   faculty.
4. Program-level SLOs will be identified for 100% of Norco programs by 2009.
5. One hundred percent (100%) of Norco College academic programs will be reviewed in three years, and ongoing program reviews will be conducted each
   academic year.



Goal 5: Enhance Institutional Effectiveness

1. Norco College will develop and activate an independent website by the beginning of the fall 2008 enrollment period.
2. Norco College will publish its own College catalog by September 2009.
3. Norco College will create a marketing plan by September 2009.




                                                                             4
                        I. Norco College Annual Instructional Program Review Update
                                                                                    Unit: Manufacturing, Supply chain technologies and Electronics
                                                                                                Contact Person: Paul Van Hulle and Glen Graham
                                                                                                                          Date: February 24, 2012

                                                         Trends and Relevant Data

1. Have there been any changes in the status of your unit? (if not, skip to #2)
      a. Has your unit shifted departments?

         Slightly, manufacturing is still offering the “Automated Systems Technician Certificate” and the “Computer Aided Production
         Certificate”. Manufacturing will soon be offering two new certificates in Supply Chain Technology and Computer Numerical Control
         Programming. Electronics will soon be compiling all of its certificates into one certificate known as the Digital Electronics certificate.
         These three new certificates will come on line during the Fall 2012 semester.

      b. Have any new certificates or complete programs been created by your unit?

         Yes, see above.

      c. Have activities in other units impacted your unit? For example, a new Multi Media Grant could cause greater demand for Art courses.

         Yes, the Supply Chain Technology certificate has been created and will cause greater demand for Manufacturing 64, 55, 60 and
         Electronics 10.




                                                                         5
2. List your retention and success rates as well as your efficiency. Have there been any changes or significant trends in
   the data? If so, to what do you attribute these changes?
   As shown below the retention and the success rates for manufacturing, machine shop technology and electronics courses have increased at least
   5-10% over a 5 year period. I contribute this to many factors including:
                  The instructors are improving how they present the subjects
                  Students are getting more serious as the economy gets worse


      Please see appendix A for a complete list of data for manufacturing, machine shop technology and electronics.

              From 05fall to 08spring average retention rates for man/mac             80.31%
              From 08fall to 11winter average retention rates for man/mac             84.83%

              From 05fall to 08spring average success rates for man/mac               58.48%
              From 08fall to 11winter average success rates for man/mac               66.85%



              From 05fall to 08spring average retention rates for ele                 76.43%
              From 08fall to 11winter average retention rates for ele                 79.41%

              From 05fall to 08spring average success rates for ele                   53.96%
              From 08fall to 11winter average success rates for ele                   64.60%

      Sorry, I need some help understanding how to read the efficiency data. Perhaps we need to have a meeting on this.




                                                                            6
Norco College
Retention Rate For 2011 Spring Semester

According to the California Community Colleges website
https://misweb.cccco.edu/mis/onlinestat/ret_sucs_prog.cfm?timeout=800
Norco College's Engineering and Industrial Technologies
Program Type                                                Total                  Retention
Enrollments                                                 Retained    Retention Rate(%)
Engineering and Industrial Technologies (09) Fall 2011              799        688      86.11
Engineering and Industrial Technologies (09) Spring 2011            871        725      83.24




According to the California Community Colleges website:
https://misweb.cccco.edu/mis/onlinestat/ret_sucs_rpt.cfm?timeout=800
Norco College's Engineering and Industrial Technologies
Program Type                                                Total                 Success
                                                            Enrollments Succeeded Rate(%)
Engineering and Industrial Technologies (09) Fall 2011             799        610      76.35
Engineering and Industrial Technologies (09) Spring 2011           871        653      74.97




According to the California Community Colleges website:
Norco College's Engineering and Industrial Technologies
Award Count for Norco College in Year 2010-2011
                                                                                                         Award
Award type                                                Program type                                   count
Associate of Science (A.S.) degree                        Engineering and Industrial Technologies (09)           21
Certificate requiring 18 to < 30 semester units           Engineering and Industrial Technologies (09)           12
Certificate requiring 30 to <60 semester units            Engineering and Industrial Technologies (09)           28
Certificate requiring 6 to < 18 semester units            Engineering and Industrial Technologies (09)           33

                                                                  7
3. What annual goals does your unit have for 2012-2013 (please list the most important first)? Please indicate if a goal is
   directly linked to goals in your comprehensive. How do your goals support the college mission and the goals of the
   Educational Master Plan?

List the goals of your unit for 2012-2013   List activity(s) linked to the goal                                          Relationship of goal to
                                                                                                                         mission and master
                                                                                                                         plan
Growth of the machining and manufacturing          Various tours by the students at Norco College Business and          Goal 4
program                                             Engineering of the CACT and IT 124 classrooms.
                                                   Attended and had a table for the Career fair at Norco College

                                                            Appendix H, shows a survey published by: Metalworking
                                                            Trends Survey, March 2012, Published by: Techspex
                                                            and LoSasso Advertising Inc. This survey shows the need
                                                            for qualified workers in the machining industry. The
                                                            survey found that “Scarcity of qualified labor to be the
                                                            greatest threat to company success.

Develop the supply chain technology                Attended many of the classes at Cal Poly Pomona that I am teaching   Goal 4 #2
program                                             during the Spring 2012 semester.
                                                   Many meetings with Cal Poly Pomona instructors’
                                                   Attended the Rockwell Automation on the Move seminar at the
                                                    Anaheim convention center
                                                   Created curriculum for the Supply Chain Technology courses and
                                                    certificate
                                                   Constantly working on the course curriculum and lesson plans for
                                                    teaching the Supply Chain Technology courses
                                                   Reading approximately 100-250 pages per a week in the textbooks
                                                    used in the supply chain and automation technology courses

                                                                         8
Improve the Automated Systems Program               I plan on attending using money from Perkins Grants and NSF grant      Goal 4 #2
Much of the required improvement of the              the course that are shown in the appendix
automated systems program also has an              I plan on attending FPGA training offered by Lab View that will
effect on the supply chain technology                allow me to improve my skills at teaching Lab View that is one of
program                                              the courses that are in the catalog and have not been offered.
                                                   I also plan on improving my knowledge of PanelView, Factory Talk,
                                                     RS Logix 5000, and Powerflex VFD drive systems.
Industry awareness of the program                  Industry visit is a constant priority for my program and I have taken   Surprisingly working
                                                     numerous opportunities for this priority for example in December I     with industry is not
                                                     attended a meeting at Solar Corporation to talk about how Norco        one of the Goals of the
                                                     College can help train their employees.                                college???
                                                   Soon, I will be attending the Industry Advisory Council meeting put
                                                     on by Kevin Fleming
Head instructor is now the department chair   Constantly working with instructors to make sure they are assessing their     Goal 1
for BEIT                                      courses and they and their students are successful.
Developed program level outcomes              All programs within the manufacturing and electronics programs have listed    Goal 4 #2
                                              and correlated with course student level outcomes their program level
                                              outcomes.
Hired many different lab techs to assist                                                                                    Goal 4
teachers in the classroom


*Your unit may need assistance to reach its goals. Financial resources should be listed on the subsequent forms. In addition you may need help
from other units or Administrators. Please list that on the appropriate form below, or on the form for “other needs.”




                                                                        9
                          Norco College Annual Instructional Program Review Update
                                                                                        Unit: Manufacturing, Supply chain technologies and Electronics
                                                                                                    Contact Person: Paul Van Hulle and Glen Graham
                                                                                                                              Date: February 24, 2012

                                                       Current Human Resource Status

4. Complete the Faculty and Staff Employment Grid below. Please list full and part time faculty numbers in separate
   rows. Please list classified staff who are full and part time separately:


                                                          Faculty Employed in the Unit
            Teaching Assignment (e.g. Math, English)                Full-time faculty or staff (give   Part-time faculty or staff (give number)
                                                                    number)
            Electronics                                             0                                  Glen Graham
                                                                                                       Romero
                                                                                                       Scott
                                                                                                       Bill
            Manufacturing                                           Paul Van Hulle                     Pat M.
                                                                                                       Kevin W.



                                                       Classified Staff Employed in the Unit
            Staff Title                                              Full-time staff (give number)       Part-time staff (give number)

            None




                                                                          10
                                                                                                        Unit: Manufacturing, Supply chain technologies and Electronics
                                                                                                                    Contact Person: Paul Van Hulle and Glen Graham
                                                                                                                                              Date: February 24, 2012
 5. Staff Needs
                                          NEW OR REPLACEMENT STAFF (Administrator, Faculty or Classified)1
                                                                                                                                                        Indicate (N) =
                     List Staff Positions Needed for Academic Year 2012-present                                                                          New or (R) =
                                                                                                                                                                                  Annual
Please justify and explain each faculty request as they pertain to the goals listed in item #3. Place titles                                             Replacement
                                                                                                                                                                                  TCP*
                                   on list in order (rank) or importance.

1. Replacement for Jim Sutton.                                                                                                                         Replacement
Reason: Last year we lost Jim Sutton. Currently, we are using student workers to replace the tasks that Jim used to
do. Since these are student workers I am now required to come to the campus at 10:00am and I end my day at 9:30pm.
Lately, I have been at school all day. These two student workers have classes while I am teaching and cannot do the
tasks that Jim used to do while I am teaching.
 * TCP = “Total Cost of Position” for one year is the cost of an average salary plus benefits for an individual. New positions (not replacement positions) also require
 space and equipment. Please speak with your college Business Officer to obtain accurate cost estimates. Please be sure to add related office space, equipment and other
 needs for new positions to the appropriate form and mention the link to the position. Please complete this form for “New” Classified Staff only. All replacement staff
 must be filled per Article I, Section C of the California School Employees Association (CSEA) contract.




 1
     If your SLO assessment results make clear that particular resources are needed to more effectively serve students please be sure to note that in the “reason” section of this form.




                                                                                               11
                                                                                   Unit Name:               Manufacturing, Supply chain technologies and Electronics

 6. Equipment (including technology) Not Covered by Current Budget2
                                                                                                                 *Indicate whether                           Annual TCO*
List Equipment or Equipment Repair Needed for Academic Year_______                                             Equipment is for (I) =
Please list/summarize the needs of your unit on your college below. Please be as                               Instructional or (N) =
specific and as brief as possible. Place items on list in order (rank) or importance.                            Non-Instructional
                                                                                                                                           Cost per item   Number
                                                                                                                                                                        Total Cost      EMP
                                                                                                                     purposes                                           of Request     GOALS
                                                                                                                                                           Requested
Thanks to all of the money provided by NSF and Perkins grants this year and
hopefully next year Manufacturing, Supply Chain, and Electronics technologies will
only need the same amount of funding provided this year. As long as we have no
machine break downs, Machining, Manufacturing, Electronics, and Supply Chain
Technologies is requesting the same amount of supply funds (4320), waste disposal
(5570), and computer software maint/lic (5649) funds that we were allocated in the
2011-2012.
1. Allocations incase a machine breaks down in the IT 124 or CACT center.                                      Instructional               $20-
Reason: Previously, we had the support of the CACT grant incase of machine break                                                           $40,000
downs. Machine break downs are a constant concern. I have had one machine break                                                            per a
during the Spring 2011 semester and then the same part break down again during the                                                         year just
fall semester. Luckily the part was only $500.00 and it was something that my
                                                                                                                                           incase
students could replace. I have now replaced the part with a new design that another
company came up with that will only break one section of the part at a time. I am also
making a better effort to make sure that the students keep the pull-tabs on the
machines well greased so that we don’t have the same problem. I would suggest that
the school plan on having at least $20-$40,000 every year available incase of machine
break down as the CACT grant always provided.
 * Instructional Equipment is defined as equipment purchased for instructional activities involving presentation and/or hands-on experience to enhance student
 learning and skills development (i.e. desk for student or faculty use).
 Non-Instructional Equipment is defined as tangible district property of a more or less permanent nature that cannot be easily lost, stolen or destroyed; but
 which replaces, modernizes, or expands an existing instructional program. Furniture and computer software, which is an integral and necessary component for
 the use of other specific instructional equipment, may be included (i.e. desk for office staff).


 2
     If your SLO assessment results make clear that particular resources are needed to more effectively serve students please be sure to note that in the “reason” section of this form.




                                                                                               12
                                                                                       Unit Name:               Manufacturing, Supply chain technologies and Electronics

7. Professional or Organizational Development Needs Not Covered by Current Budget*3

           List Professional Development Needs for Academic Year 2012-2013.                                                                 Annual TCO*
        Reasons might include in response to assessment findings or the need to update skills to comply with
       state, federal, professional organization requirements or the need to update skills/competencies. Please
        be as specific and as brief as possible. Some items may not have a cost per se, but reflect the need to
          spend current staff time differently. Place items on list in order (rank) or importance. Examples         Cost per      Number            Total
                               include local college workshops, state/national conferences.                          item         Requested        Cost of          EMP Goals
                                                                                                                                                   Request
                                                                                                                                  1               1,500          Goal 4 objective
       1. Further training on equipment in the classroom                                                            $1,500                                       2
       Reason: Update competencies on the equipment in the IT-124 classroom


*It is recommended that you speak with the Faculty Development Coordinator to see if your request can be met with current budget.




3
    If your SLO assessment results make clear that particular resources are needed to more effectively serve students please be sure to note that in the “reason” section of this form.



                                                                                              13
                                                                                        Unit Name:              Manufacturing, Supply chain technologies and Electronics

     Student Support Services, Library, and Learning Resource Center (see definition below**) Services needed by your unit
     over and above what is currently provided by student services at your college. Requests for Books, Periodicals, DVDs, and Databases must include
     specific titles/authors/ISBNs when applicable. Do not include textbook requests. These needs will be communicated to Student Services at your
     college4


                                    List Student Support Services Needs for Academic Year 2012-2013                                                                           EMP
      Please list/summarize the needs of your unit on your college below. Please be as specific and as brief as possible. Not all needs will have a                          GOALS
                                               cost, but may require a reallocation of current staff time.

    1. Manufacturing and machine tool technology is requesting a lab aide for assisting with organization of the lab                                                      Goals 3 and
    and assisting students during classes.                                                                                                                                     4
    Reason: During class the lab aide will be used to assist the instructor watch for unsafe actions by neophyte students and
    to help students practice machine setup procedure. Outside of class the lab aide will be used to organize tool placement
    within the tool boxes and cabinets. The cost of these lab aides will be $10.00/hour and he/she will be used for all classes
    during the entire class period. I recommend that the same amount be allocated for lab aides as was allocated last year.
    2. Electronics is also requesting a lab aide for assisting during classes.                                                                                            Goals 3 and
    Reason: During class the lab aide will be used to assist the instructor. The cost of this lab aide will be $10/hour and                                                    4
    he/she will be used for all classes during the entire class period. Electronics department recommends 20 hours/week at a
    cost of $200.00 per a week and $6400 per a year.
**Student Support Services include for example: tutoring, counseling, international students, EOPS, job placement, admissions and records, student assessment
(placement), health services, student activities, college safety and police, food services, student financial aid, and matriculation.




4
    If your SLO assessment results make clear that particular resources are needed to more effectively serve students please be sure to note that in the “reason” section of this form.




                                                                                              14
                                                                                        Unit Name:               Manufacturing, Supply chain technologies and Electronics

8.      OTHER NEEDS not covered by current budget5

                                                                                                                                          Annual TCO*
                            List Other Needs that do not fit elsewhere.
          Please be as specific and as brief as possible. Not all needs will have a cost, but may
            require a reallocation of current staff time. Place items on list in order (rank) or                Cost per       Number                                           EMP
                                                importance.                                                                                   Total Cost of Request
                                                                                                                 item          Requested                                        Goals
        Two GuardLogix Control systems trainer (I also                                                                                    2                      28,000
        plan on putting this in my Perkins proposal)                                  14,000
        Reason: On Friday March 2, 2012 I visited a sales person from Royal
        Wholesale electric. I had asked him where he sees the industry
        Automation industry moving in the next 5 years. He stated that the
        industry will need to start putting much more emphasis on safety and that
        Germany is already developing safety PLC systems. With this trainer
        students learn how to program safety instruction within a GuardLogix
        safety task for monitoring safety-circuitry. With this system the
        Guardlogix controller can be locked to protect safety control components
        from modification. Students learn how to use a light curtain for
        simulating point of operation control. As shown in appendix E out of the
        100 jobs listed on a job website 25 require the students to be skilled at
        safety procedures.
        A trunnion table for the Haas milling machine                               20,000   1                                                $20,000
        Reason: In order to teach 4th and 5th axis Mastercam we should consider
        purchasing a trunnion table for the Haas CNC milling machine. The 2009
        industry advisory council group stated that if the school plans on teaching
        Manufacturing 53-Advanced Mastercam the students should have access
        to a 4th/5th axis machine to enable them to practice cutting their programs
        created during class. Notice in appendix D that I provide data on the

5
     If your SLO assessment results make clear that particular resources are needed to more effectively serve students please be sure to note that in the “reason” section of this form.



                                                                                               15
amount of positions in the field of Computer numerical control
programming. I searched for the word programming and found it was
mentioned 40 times. I searched for the word multiaxis and it was found
10 times. I have many students requesting that the Manufacturing 53-
advanced mastercam be taught and that we add a 5th axis to the machine
Appendix I, published by: Metalworking Trends Survey, March 2012,
Published by: Techspex and LoSasso Advertising Inc. 18% of
machining companys state that they plan on purchasing a 5th axis
machining center within one year.




                                                              16
                                                 II. Annual Assessment Update

The primary purpose of this update is to provide an overview of your discipline’s effort to assess learning in your courses and programs
during the present academic year. We also ask that you indicate in some detail your plans for assessing learning in 2012-13. Authentic
assessment rests on five basic principles: 1) the use of direct assessment measures as much as possible; 2) the effort to assess courses and
programs (rather than simply sections) as much as possible; 3) as much collaboration and dialogue regarding assessment as your
circumstances permit; 4) the use of assessment data to improve teaching and learning in the discipline; and 5) tangible documentation
(usually in the form of short reports) of your assessment activities and findings. For help with any phase of the assessment process, please
contact either Arend Flick at arend.flick@norcocollege.edu or Greg Aycock at greg.aycock@norcollege.edu. Your report will be used for
planning and resource allocation purposes at the college, and it will assist us in writing the comprehensive annual college-based assessment
report required by ACCJC.

Please note: Individual assessment reports on specific projects may be included as appendices to this update, along with any other evidence
demonstrating your discipline’s assessment work this year. Please send assessment reports to Arend and Greg as you complete them. In
some instances, you may respond to the following questions simply by referencing these reports.

   1. Please provide an overview of your assessment activities during this academic year, using either the following chart or a
      narrative.
      Please see Appendix B for details on the documentation for each of the questions used on the final exams and/or quizzes that were
      used to measure each SLO
       Course or   SLO(s)/PLO(s) assessed       Method(s)          Number of     Brief description of     Relevance of assessment
       program                                  employed           faculty       findings/results (and/or findings to resource requests
       assessed                                                    involved in   attach assessment
                                                                   assessment    reports)
       Man/Mac     Recognize NC machine codes   Students had       1             While students had
       56          and terminology for          many                             opportunities to show
                   computerized machining and
                   manufacturing.               opportunities to                 that they understood the
                                                demonstrate that                 G codes involved in
                                                they could use                   testing tool heights and
                                                each of the                      fixture position I was
                                                commands that                    surprised to learn that
                                                they were tested                 they did not do well on



                                                                       17
                                      on. During the               the final exam when
                                      final exam                   asked how these g-
                                      students were                codes are used. 68%
                                      given a test with            overall on these
                                      questions that               questions was lower
                                      pertain to this              then I expected. It
                                      SLO. The                     could be the fact that
                                      amount of                    when I have them show
                                      students that got            me that they are set up
                                      the question was             tool heights I let them
                                      divided by the               use their notes.
                                      amount of
                                      students that
                                      took the test.
MAN 55   Locate and apply OSHA        During the final    1        75%                        Students did at least average
         safety and Health            exam students                                           on the questions that pertain to
         standards, policies and      were given a test                                       this SLO
         procedures for general       with questions
         industry.                    that pertain to
                                      this SLO.
MAN 55   Identify common              During the final    1        79%                        Students did at least average
         violations of OSHA           exam students                                           on the questions that pertain to
         standards and propose        were given a test                                       this SLO
         abatement actions.           with questions
                                      that pertain to
                                      this SLO.
Man 64   Please see Appendix B                            1                                   Please see the electronics’
                                                                                              instructor comments under: #3
ELE 25   Please see Appendix B                            1                                   Please see the electronics’
                                                                                              instructor comments under: #3
SCT 3    Apply critical thinking      During the final    1        67% of the students in
         skills to establish the      exam students                the class got this SLO
         crucial importance of        were given a test            correct on the questions
         crosscutting issues in the   with questions               that pertain to it that
         management of operations     that pertain to              were presented on the
         technology and the role of   this SLO. The                test.



                                                              18
          technology and operations     amount of
          as the ultimate competitive   students that got
          weapons of a business         the question was
          enterprise                    divided by the
                                        amount of
                                        students that
                                        took the test.
SCT 3     Discuss the technologies      During the final    1        80% of the students in
          and standards for             exam students                the class got this SLO
          collaborative commerce in     were given a test            correct on the questions
          supply chain management.      with questions               that pertain to it that
                                        that pertain to              were presented on the
                                        this SLO. The                test.
                                        amount of
                                        students that got
                                        the question was
                                        divided by the
                                        amount of
                                        students that
                                        took the test.
SCT 3     Identify strategic decision   During the final    1        65% of the students in
          choices, operations           exam students                the class got this SLO
          strategies and their          were given a test            correct on the questions
          relevance to global           with questions               that pertain to it that
          competitiveness;              that pertain to              were presented on the
                                        this SLO. The                test.
                                        amount of
                                        students that got
                                        the question was
                                        divided by the
                                        amount of
                                        students that
                                        took the test.
Man/Ele   General comment                                   1        There are way too          Soon I will be purchasing
61                                                                   many SLOs for this         equipment using VTEA funds
                                                                     class and many of the      that will help align the content



                                                                19
                                                                   SLOs were written for       more closely to the slos of the
                                                                   when the class was in       course. Even with this
                                                                   the CACT. We have           equipment I will need to
                                                                   different equipment and     update the course.
                                                                   many of these SLOs are
                                                                   hard to measure.
                                                                   During the fall 2012
                                                                   semester I plan on
                                                                   presenting a complete
                                                                   update of all of the
                                                                   student learning
                                                                   outcomes of the
                                                                   MAN/ELE 61 course.
Man/Ele   Describe how computers,     During the final    1        The average for this        This SLO will need to be
61        electronics and machining   exam students                SLO was 64% and 8           edited and machining should
          are used in manufacturing   were given a test            questions were              be removed.
          to control and construct    with questions               removed from the
          robotic machinery           that pertain to              students’ final exam
                                      this SLO. The                grade. This could be
                                      amount of                    better. Most of the
                                      students that got            questions were taken
                                      the question was             from the textbook
                                      divided by the               testbank. It may show
                                      amount of                    that the students are not
                                      students that                reading their textbook.
                                      took the test.
Man/Ele   Perform basic               During the final    1        Students were given
61        measurement using a         exam students                two questions that
          multi-meter including:      were given a test            pertain to this SLO.
          Voltage, resistance and     with questions               These two questions
          amps.                       that pertain to              were taken from the
                                      this SLO. The                textbook test bank.
                                      amount of                    70% is just below
                                      students that got            average for these two
                                      the question was             questions. Students did
                                      divided by the               very well when they



                                                              20
                                          amount of                     were given the task of
                                          students that                 using a volt meter.
                                          took the test.
                                          Students were
                                          also given a
                                          hands on project
                                          that helped them
                                          show that they
                                          are skilled at
                                          completed this
                                          tasks.
   Man/Ele     Use proper circuit board   During the final    1         Students were assigned
   61          soldering techniques       exam students                 a project in which they
                                          were given a test             had to do proper
                                          with questions                soldering. They also
                                          that pertain to               had one question about
                                          this SLO. The                 soldering on their final
                                          amount of                     exam they got a 68%
                                          students that got             on this one question.
                                          the question was
                                          divided by the
                                          amount of
                                          students that
                                          took the test.
                                          Students were
                                          also given a
                                          hands on project
                                          that helped them
                                          show that they
                                          are skilled at
                                          completed this
                                          tasks.




2. Please describe and provide evidence of your discipline’s dialogue about assessment, specifically assessment results.


                                                                  21
   Please see Glen’s comments under #3

   On May 9th and 10th, 2012 I had a conversation about assessment with many of the part time faculty involved in the program.
   The results of the conversation are shown below.

   Glen Graham stated that he will change the way he is doing assessment by correlating his final exam and midterm questions to
   the student learning outcomes they relate to. He also stated that he will discuss these results with other Electronics
   department faculty. He also realizes that the assessment results shown in the appendix were flawed because many of the
   students skipped the required questions. He plans on using multiple questions from his quizzes, midterm, and final exam as his
   assessment tool.

   Romeo Lampa, and Scott Curren: I showed them the outcomes assessment website on the Norco College website. They
   understand that they need to identify questions on their final exam and midterm exam that relate to the student learning
   outcomes of their courses. Romeo stated that he plans on contact Greg Aycock to get more information about program review.

   I also had a conversation with Kevin Wils, the adjunct instructor for machining. He is currently working on identifying which
   questions relate to his courses student learning outcomes. He understands what he needs to do to assess his course and he
   plans and doing more work on assessment during the next year’s program review cycle.

   All of the instructors mentioned in this document are working on assessment and understand the basics of the requirements
   and how to get more help. A few of the instructor’s stated that they just have too much to do at their regular job to be able to do
   much more with Norco College. One in particular stated that if the college keeps putting more requirements on that he will
   have to start saying no to even teaching one course.

   Next year we plan on having a meeting together to talk about the results of their assessment efforts. The meeting will either be
   on a phone conversation or in person or one-on-one with each instructor.


3. Please describe in detail how you have used or plan to use your assessment results to try to improve teaching and learning in
   your course(s) or program(s).

   For the MAN/MAC 56 course I plan on not letting them use their notes when the student demonstrate that they can setup and test
   their setups.



                                                               22
      As for the SCT 3 course, this was the first time this course was taught and there is a lot of room for improvement.

      Regarding the MAN/ELE 61 course. Soon I will be purchasing equipment using VTEA funds that will help align the content more
      closely to the SLOs of the course. There are too many SLOs for this class and many of the SLOs were written for when the class was
      in the CACT. We have different equipment and many of these SLOs are hard to measure. During the fall 2012 semester, I plan on
      presenting a complete update of the student learning outcomes for the MAN/ELE 61 course.

From Glen Graham regarding assessment of ELE-25 and MAN-64:

      SLO assessment is supposed to give feedback on the success of the learning objectives. But, I believe the assessment was flawed
      this time, as a result of faulty sampling. The assessment for ELE-25 looks fairly good and will help me better stress the SLO items,
      and test them, earlier next time. For both the ELE-25 and MAN-64, we were told about the need to assess so late that I had to
      include questions about the SLOs on the FINAL EXAM only. All students who tried to complete those questions were successful
      (except one, who had a severe learning disability). Several students abstained, due to the shortness of time, so I could get NO results
      on the SLOs from them. Under these circumstances, it was an ALL-OR-NOTHING analysis of the SLO, based on whether each
      student felt they had time to answer, and several did not even attempt to answer. But, I am sure they nearly all could have
      succeeded, if all had tried. This is also somewhat true of the ELE-25 class, due to the late data gathering schedule for the SLOs (well
      past mid-terms). But, in ELE-25, I had multiple questions to sample each SLO success.

      The bottom line is that I will try to stress the SLOs earlier and continuously, and allow more opportunities than just one question
      each on the final exam, where students can successfully demonstrate SLO achievement, averaged over the whole semester. I do not
      believe that students who were measured as incompetent in those SLOs were not capable, but simply lacked the time to complete
      them, in their minds. On the FINALS, they preferred to answer the questions that they felt would more easily amass more points for
      the best grade--not really caring about SLO assessment, as much as their overall grades for those classes. Now, we know ahead of
      time, so we can sprinkle many assessments for SLOs throughout the semester.

From Kevin Wils regarding assessment of MAN 52:

      For my Assessment (Man 52, Fall) results, I plan on utilizing the shop equipment more often. The students asked me several times
      when they could prove out their programs on something besides the simulations that the Mastercam software provides. I would like
      to show the students a brief overview of the setup of the machine, reflecting how they set their model up, and then let them load their
      programs into the machine and see what the result will be. I will be operating the machine. I would also like to let the students be
      more creative as far as designing their own parts.



                                                                    23
4. If you have been involved in program-level assessment:
       a. Have PLOs been defined for all programs?

          Yes, please see appendix F for each PLO and how they are mapped with each courses’ SLO.

      b. Have existing PLOs been modified?

          Yes, please see appendix F for each PLO and how they are mapped with each courses’ SLO.


      c. Have course SLOs been fully mapped and aligned to PLOs? What did you learn from this process that might affect
         your program?

          Yes, please see appendix F for each PLO and how they are mapped with each courses’ SLO.


      d. What method(s) have you used to assess PLOs?

          None as of yet, we still need to work on this.

      e. What have you learned from your program-level assessment work?

          We have not yet assessed our PLOs

      f. Have you shared and discussed assessment results (e.g., through Community Advisory Committee discussions,
         discussions with employers, interviews with graduates, program faculty meetings, etc.)?

          No, our next community advisory committee has been scheduled and we plan on sharing some of this information with them
          soon.

5. How do assessment results support your resource requests?



                                                             24
   As for the machining program, we are teaching on a very elementary level to what industry demands. Though we have not discussed
   this with our industry advisory I feel that the advisory would see that we are teaching very elementary CNC programming and once
   the proposed certificate for CNC programing is approved industry will be impressed with the level of our students.

6. Please provide an overview of your assessment plans for 2011-12, using either the following chart or a narrative. (Please
   note: every course should be assessed at least once every four years. Rarely taught courses should be routinely assessed
   during the semester they are taught.)

          Course or            SLO(s) to be            Method(s)            Faculty involved in Expected date of
          program to be        assessed                employed             the project         completion
          assessed
          MAN 57               Analyze CNC             During the final      Kevin Wils          By the end of the
                               programs written by     exam students will                        Spring 2012
                               others to determine     be given test                             semester
                               machining               questions that
                               sequences.              pertain to this SLO.
                                                       Students will also
                               Perform                 be given practical
                               calculations            projects that involve
                               necessary to            practice of the
                               develop coordinate      skills.
                               charts for part
                               geometry.

                               Use canned cycles
                               correctly in
                               programs for CNC
                               machine tools.
          SCT 2                Describe the role of    During the final     Paul Van Hulle       By the end of the
                               transportation in the   exam students will                        Spring 2012
                               economy and supply      be given test                             semester
                               chain;                  questions that


                                                               25
                               pertain to this SLO.
                               Students will also
                               be given practical
                               projects that involve
                               practice of the
                               skills.
SCT 4    Describe the role of  During the final        Paul Van Hulle       By the end of the
         transportation in the exam students will                           Spring 2012
         economy and supply    be given test                                semester
         chain;                questions that
                               pertain to this SLO.
         Describe how ArcGIS
                               Students will also
         (a GPS fleet
         management and        be given practical
         routing system by     projects that involve
         ESRI) is used in      practice of the
         industry.             skills.
ELE 10                         During the final        Glen Graham          By the end of the
                               exam students will                           Spring 2012
                               be given test                                semester
                               questions that
                               pertain to this SLO.
                               Students will also
                               be given practical
                               projects that involve
                               practice of the
                               skills.
MAN 60   Setup and operate     During the final        Pat Maluso the fluid By the end of the
         fluid powered         exam students will      power instructor     Spring 2012
         valves, cylinders,    be given test                                semester
         controls, filters and questions that
         actuators.            pertain to this SLO.
                               Students will also
         Calculate functions be given practical


                                        26
and load            projects that involve
requirements then   practice of the
design, select      skills.
components and test
complex fluid
powered systems in
a robotic or
industrial
environment.

Recognize fluid
power schematic
symbols.




                              27
                                                         Appendix A
                                                     Enrollment Statistics

Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Enrollments

                                                               First               Last               Section    Room    Course
Term             Loc    Dept     Disc    Course     Sections   Day        Census   Day     Waitlist    Cap        Cap     Cap
10SPR            NOR    N0500    ELE     ELE-10           1          24       24      20         0          25      32        30
                                         ELE-21           1          23       23      16         0          25      33        30
                                         ELE-25           1          23       21      18         0          25      32        30
                                 ELE Total                3          70       68      54         0          75      97        90
                                 MAC     MAC-56           1          21       24      20         0          24      24        30
                                         MAC-57           1          23       23      17         0          24      24        30
                                 MAC Total                2          44       47      37         0          48      48        60
                                 MAN     MAN-56           1          21       24      20         0          24      24        30
                                         MAN-57           1          23       23      17         0          24      24        30
                                         MAN-64           1          18       24      22         0          18      28        30
                                 MAN Total                3          62       71      59         0          66      76        90
                        N0500 Total                       8         176      186     150         0         189     221       240
                 NOR Total                                8         176      186     150         0         189     221       240
10SPR Total                                               8         176      186     150         0         189     221       240
11SPR            NOR    N0500    ELE     ELE-10           1          29       36      29         0          33      33        30
                                         ELE-23           1          26       26      22         0          32      32        30
                                         ELE-27           1          30       29      24         0          30      35        30
                                 ELE Total                3          85       91      75         0          95     100        90
                                 MAC     MAC-56           1          24       26      18         0          24      24        30
                                         MAC-57           1          23       23      14         0          24      24        30
                                 MAC Total                2          47       49      32         0          48      48        60
                                 MAN     MAN-56           1          24       26      18         0          24      24        30
                                         MAN-57           1          23       23      14         0          24      24        30
                                 MAN Total                2          47       49      32         0          48      48        60
                        N0500 Total                       7         179      189     139         0         191     196       210
                 NOR Total                                7         179      189     139         0         191     196       210
11SPR Total                                               7         179      189     139         0         191     196       210
11FAL            NOR    N0500    ELE     ELE-10           1          29       23      23         0          30      32        30
                                         ELE-21           1          33       36      36         0          33      33        30
                                         ELE-25           1          32       29      29         0          32      32        30



                                                               28
                                      ELE-61    1         28    30    30   0    28    28    30
                              ELE Total         4        122   118   118   0   123   125   120
                              MAC     MAC-56    1         24    35    35   0    24    24    30
                              MAC Total         1         24    35    35   0    24    24    30
                              MAN     MAN-52    1         24    26    26   0    24    24    30
                                      MAN-56    1         24    35    35   0    24    24    30
                                      MAN-61    1         28    30    30   0    28    28    30
                                      MAN-64    1         27    27    27   0    28    28    30
                              MAN Total         4        103   118   118   0   104   104   120
                              SCT     SCT-3     1         26    19    19   0    28    28
                              SCT Total         1         26    19    19   0    28    28
                     N0500 Total               10        275   290   290   0   279   281   270
              NOR Total                        10        275   290   290   0   279   281   270
11FAL Total                                    10        275   290   290   0   279   281   270
Grand Total                                    25        630   665   579   0   659   698   720




                                                    29
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 1 of 6
                                    Term Data
                                    05FAL                          06SPR                          06FAL
Loc           Dept Disc Course          Sect Fill RateXL Fill Rate     Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate
NOR           N0500 ELE ELE-10             1      43%         43%         1      33%         77%         1      68%          120%
                            ELE-21         1      37%         37%         1      43%         77%         1      52%          120%
                            ELE-22
                            ELE-23         1      13%         13%
                            ELE-25                                                                       1      22%           22%
                            ELE-26         1      28%         28%
                            ELE-27                                                                       1      27%           40%
                            ELE-61
                    ELE Total              4      30%         30%         2      38%         77%         4      40%           71%
                    MAC MAC-55
                           MAC-56          1      79%         83%         1      63%         92%         1      25%           71%
                           MAC-57          1      17%         67%         1       8%         50%         1      33%           54%
                    MAC Total              2      48%         75%         2      35%         71%         2      29%           63%
                    MAN MAN-52             1      50%         50%         1     100%        100%         1      38%           38%
                           MAN-53
                           MAN-55
                           MAN-56          1       4%         83%         1      29%         92%         1      46%           71%
                           MAN-57          1      50%         67%         1      42%         50%         1      21%           54%
                           MAN-60
                           MAN-61
                           MAN-64
                           MAN-81                                         1       5%         77%
                    MAN Total              3      35%         67%         4      45%         80%         3      35%           54%
                    SCT      SCT-3
                    SCT Total
              N0500 Total                  9      35%         50%         8      41%         77%         9      36%           64%
NOR Total                                 9      35%         50%          8     41%          77%         9      36%         64%

Grand Total                               9     35%          50%          8     41%         77%          9     36%          64%


                                                               30
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 2 of 6

                                   07SPR                         07FAL                         08SPR
Loc           Dept Disc Course        Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate
NOR           N0500 ELE ELE-10           1      72%         72%        1      68%         68%        1      80%         80%
                          ELE-21         1      60%         60%        1      57%         57%        1      67%         67%
                          ELE-22                                                                     1      37%         37%
                          ELE-23
                          ELE-25
                          ELE-26
                          ELE-27          1      30%         47%
                          ELE-61                                          1      25%         46%
                    ELE Total             3      53%         59%          3      51%         57%          3     60%             60%
                    MAC MAC-55
                          MAC-56          1      25%         50%          1      22%         63%
                          MAC-57                                                                          1     21%             88%
                    MAC Total             1      25%         50%          1      22%         63%          1     21%             88%
                    MAN MAN-52            1      50%         50%
                          MAN-53
                          MAN-55
                          MAN-56          1      25%         50%          1      54%         63%          1     83%             83%
                          MAN-57                                                                          1     67%             88%
                          MAN-60
                          MAN-61                                          1      21%         46%
                          MAN-64
                          MAN-81
                    MAN Total             2      38%         50%          2      38%         55%          2     75%             85%
                    SCT    SCT-3
                    SCT Total
              N0500 Total                 6      43%         55%          6      41%         57%          6     59%             72%
NOR Total                                 6      43%          55%         6      41%          57%         6      59%            72%

Grand Total                               6      43%         55%          6      41%         57%          6     59%             72%


                                                               31
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 3 of 6

                                   08FAL                         09WIN                         09SPR
Loc           Dept Disc Course        Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate
NOR           N0500 ELE ELE-10           1      51%         51%                                      1      75%         75%
                          ELE-21         1      46%         46%                                      1      53%         53%
                          ELE-22
                          ELE-23
                          ELE-25
                          ELE-26                                                                          1     66%             66%
                          ELE-27          1      10%         40%
                          ELE-61          1      71%        100%
                    ELE Total             4      44%         56%                                          3     65%             65%
                    MAC MAC-55                                            1      14%         70%
                          MAC-56          1      31%        104%                                          1     50%             92%
                          MAC-57                                                                          1     21%             79%
                    MAC Total             1     31%         104%          1      14%         70%          2     35%             85%
                    MAN MAN-52            1    104%         104%
                          MAN-53                                                                          1     67%             67%
                          MAN-55                                          1      46%         70%
                          MAN-56          1      63%        104%                                          1     42%             92%
                          MAN-57                                                                          1     58%             79%
                          MAN-60
                          MAN-61          1      29%        100%
                          MAN-64
                          MAN-81
                    MAN Total             3      65%        103%          1      46%         70%          3     56%             78%
                    SCT    SCT-3
                    SCT Total
              N0500 Total                 8      49%         77%          2      30%         70%          8     55%             74%
NOR Total                                 8      49%          77%         2      30%          70%         8      55%            74%

Grand Total                               8      49%         77%          2      30%         70%          8     55%             74%


                                                               32
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 4 of 6

                                   09FAL                         10SPR                         10FAL
Loc           Dept Disc Course        Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate    Sect Fill RateXL Fill Rate
NOR           N0500 ELE ELE-10           1      86%         86%        1      96%         96%        1      77%         77%
                          ELE-21         1      86%         86%        1      92%         92%        1      94%         94%
                          ELE-22         1      61%         61%
                          ELE-23         1      75%         75%
                          ELE-25                                       1      84%         84%
                          ELE-26                                                                     1      75%         75%
                          ELE-27
                          ELE-61          1      44%        150%                                          1     43%         104%
                    ELE Total             5      73%         85%          3      91%         91%          4     74%          87%
                    MAC MAC-55
                          MAC-56          1      42%        100%          1      42%        100%          1     46%         104%
                          MAC-57                                          1      33%         96%
                    MAC Total             1     42%         100%          2      38%         98%          1     46%         104%
                    MAN MAN-52            1    113%         113%                                          1    104%         104%
                          MAN-53
                          MAN-55
                          MAN-56          1      58%        100%          1      58%        100%          1     58%         104%
                          MAN-57                                          1      63%         96%
                          MAN-60                                                                          1     75%          75%
                          MAN-61          1    106%         150%                                          1     61%         104%
                          MAN-64                                          1    133%         133%
                          MAN-81
                    MAN Total             3      91%        118%          3      80%        108%          4     74%             96%
                    SCT    SCT-3
                    SCT Total
              N0500 Total                 9      75%         96%          8      74%         98%          9     71%             92%
NOR Total                                 9      75%          96%         8      74%          98%         9      71%            92%

Grand Total                               9      75%         96%          8      74%         98%          9     71%             92%


                                                               33
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 5 of 6

                                     11SPR                                11WIN                                11FAL
Loc           Dept    Disc Course       Sect   Fill Rate   XL Fill Rate      Sect   Fill Rate   XL Fill Rate      Sect   Fill Rate   XL Fill Rate
NOR           N0500   ELE   ELE-10         1       109%           109%                                               1        77%            77%
                            ELE-21                                                                                   1       109%           109%
                            ELE-22
                            ELE-23        1        81%            81%
                            ELE-25                                                                                   1       91%            91%
                            ELE-26
                            ELE-27        1        97%            97%
                            ELE-61                                                                                   1       75%           107%
                     ELE Total            3        96%            96%                                                4       89%            96%
                     MAC MAC-55                                                 1       43%           104%
                           MAC-56         1        58%           108%                                                1       75%           146%
                           MAC-57         1        50%            96%
                     MAC Total            2        54%           102%           1       43%           104%           1       75%           146%
                     MAN MAN-52                                                                                      1      108%           108%
                           MAN-53
                           MAN-55                                               1       61%           104%
                           MAN-56         1        50%           108%                                                1       71%           146%
                           MAN-57         1        46%            96%
                           MAN-60
                           MAN-61                                                                                    1       32%           107%
                           MAN-64                                                                                    1       96%            96%
                           MAN-81
                     MAN Total            2        48%           102%           1       61%           104%           4       76%           113%
                     SCT     SCT-3                                                                                   1       68%            68%
                     SCT Total                                                                                       1       68%            68%
              N0500 Total                 7        73%            99%           2       52%           104%          10       81%           104%
NOR Total                                 7       73%             99%          2       52%           104%          10       81%           104%

Grand Total                               7        73%            99%           2       52%           104%          10       81%           104%




                                                                    34
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Fill Rates; page 6 of 6

                                            Total                      Total XL Fill
                                            Sect    Total Fill Rate           Rate
 Loc         Dept    Disc        Course
 NOR         N0500   ELE           ELE-10      13             72%              79%
                                   ELE-21      12             67%              74%
                                   ELE-22       2             50%              50%
                                   ELE-23       3             57%              57%
                                   ELE-25       3             64%              64%
                                   ELE-26       3             56%              56%
                                   ELE-27       4             41%              56%
                                   ELE-61       5             52%              99%
                     ELE Total                 45             62%              72%
                     MAC          MAC-55        2             27%              86%
                                  MAC-56       12             45%              92%
                                  MAC-57        7             26%              76%
                    MAC Total                  21             37%              86%
                    MAN       MAN-52            8             83%              83%
                              MAN-53            1             67%              67%
                              MAN-55            2             52%              86%
                              MAN-56           13             49%              91%
                              MAN-57            7             49%              76%
                              MAN-60            1             75%              75%
                              MAN-61            5             47%              99%
                              MAN-64            2            111%             111%
                              MAN-81            1              5%              77%
                    MAN Total                  40             59%              87%
                    SCT        SCT-3            1             68%              68%
                    SCT Total                   1             68%              68%
             N0500 Total                      107             57%              80%
 NOR
 Total                                        107            57%              80%

 Grand
 Total                                        107             57%              80%



                                                                  35
Electronics Technology, Supply Chain Technology, Manufacturing Technology and Machine Shop Technology Efficiency

10SPR                                      8    139      0.89        0.05   0.75   0.00       1.69    29.51    957.83       565.29

11SPR
        NOR
               N0500
                       ELE
                              ELE-10       1      36     0.00        0.00   0.35   0.00       0.35      7.34       243.00   694.29
                              ELE-23       1      26     0.00        0.00   0.35   0.00       0.35      5.24       175.50   501.43
                              ELE-27       1      29     0.00        0.00   0.20   0.00       0.20      2.94        98.02   490.10
                       ELE Total           3      91     0.00        0.00   0.90   0.00       0.90     15.52       516.52   573.91
                       MAC
                             MAC-56        1      14     0.38        0.00   0.00   0.00       0.38      3.21       103.32   273.48
                             MAC-57        1      12     0.35        0.00   0.00   0.00       0.35      2.39        84.00   241.31
                       MAC Total           2      26     0.73        0.00   0.00   0.00       0.73      5.60       187.32   258.05
                       MAN
                             MAN-56        1      12     0.00        0.00   0.00   0.00       0.00      2.29        88.56
                             MAN-57        1      11     0.00        0.00   0.00   0.00       0.00      2.39        77.00
                       MAN Total           2      23     0.00        0.00   0.00   0.00       0.00      4.68       165.56
               N0500 Total                 7     140     0.73        0.00   0.90   0.00       1.63     25.80       869.40   534.72

        NOR Total                          7     140     0.73        0.00   0.90   0.00       1.63     25.80       869.40   534.72

11SPR Total                                7    140      0.73        0.00   0.90   0.00       1.63    25.80    869.40       534.72

11FAL
        NOR
               N0500
                       ELE
                              ELE-10       1      23     0.00        0.00   0.35              0.35      0.00         0.00     0.00
                              ELE-21       1      36     0.00        0.00   0.35              0.35      0.00         0.00     0.00
                              ELE-25       1      29     0.00        0.00   0.35              0.35      0.00         0.00     0.00
                              ELE-61       1      21     0.28        0.00   0.00              0.28      0.00         0.00     0.00



                                                                36
                      ELE Total       4   109   0.28        0.00   1.05          1.33    0.00     0.00     0.00
                      MAC
                            MAC-56    1    18   0.38        0.00   0.00          0.38    0.00     0.00     0.00
                      MAC Total       1    18   0.38        0.00   0.00          0.38    0.00     0.00     0.00
                      MAN
                            MAN-52    1    26   0.00        0.00   0.35          0.35    0.00     0.00     0.00
                            MAN-56    1    17   0.00        0.00   0.00          0.00    0.00     0.00
                            MAN-61    1     9   0.00        0.00   0.00          0.00    0.00     0.00
                            MAN-64    1    27   0.00        0.00   0.28          0.28    0.00     0.00     0.00
                      MAN Total       4    79   0.00        0.00   0.63          0.63    0.00     0.00     0.00
                      SCT
                             SCT-3    1    19   0.35        0.00   0.00          0.35    0.00     0.00     0.00
                      SCT Total       1    19   0.35        0.00   0.00          0.35    0.00     0.00     0.00
              N0500 Total            10   225   1.01        0.00   1.68          2.69    0.00     0.00     0.00

        NOR Total                    10   225   1.01        0.00   1.68          2.69    0.00     0.00     0.00

11FAL Total                          10   225   1.01        0.00   1.68          2.69    0.00     0.00     0.00

Grand Total                          25   504   2.63        0.05   3.33   0.00   6.01   55.31 1,827.23   303.79




                                                       37
Electronics, Manufacturing and Machine Shop Technology Success rates; page 1 of 6


                                       Term      Data
                                       05FAL                           06SPR                              06FAL
Loc     Dept     Disc        Course       Sect   Retention   Success      Sect      Retention   Success      Sect   Retention   Success
NOR     N0500    ELE         ELE-10          1     76.92%     69.23%         1        60.00%     50.00%         1     70.59%     35.29%
                             ELE-21          1     90.91%     36.36%         1        53.85%     38.46%         1     84.62%     69.23%
                             ELE-22
                             ELE-23          1    100.00%     75.00%
                             ELE-25                                                                            1      71.43%     71.43%
                             ELE-26          1    100.00%     77.78%
                             ELE-27                                                                            1     100.00%    100.00%
                             ELE-61
                 ELE Total                   4     89.19%     62.16%         2        56.52%     43.48%        4      80.00%     62.22%
                 MAC         MAC-55
                             MAC-56          1     84.21%     78.95%         1        73.33%     33.33%        1      83.33%     33.33%
                             MAC-57          1     75.00%     75.00%         1         0.00%      0.00%        1      87.50%     50.00%
                 MAC Total                   2     82.61%     78.26%         2        64.71%     29.41%        2      85.71%     42.86%
                 MAN         MAN-52          1    100.00%     83.33%         1        87.50%     41.67%        1      88.89%     88.89%
                             MAN-53
                             MAN-55
                             MAN-56          1    100.00%    100.00%         1        85.71%     57.14%        1      81.82%     72.73%
                             MAN-57          1     83.33%     58.33%         1        60.00%     40.00%        1      80.00%     40.00%
                             MAN-60
                             MAN-61
                             MAN-64
                             MAN-81                                          1       100.00%    100.00%
                MAN Total                    3     92.00%     72.00%         4        80.95%     45.24%        3      84.00%     72.00%
        N0500 Total                          9     88.24%     69.41%         8        70.73%     41.46%        9      82.14%     61.90%
NOR Total                                    9     88.24%     69.41%         8        70.73%     41.46%        9      82.14%     61.90%

Grand Total                                  9     88.24%     69.41%         8        70.73%     41.46%        9      82.14%     61.90%




                                                                 38
Electronics, Manufacturing and Machine Shop Technology Success rates; page 2 of 6

                                       07SPR                           07FAL                              08SPR
Loc     Dept     Disc        Course       Sect   Retention   Success      Sect      Retention   Success      Sect   Retention   Success
NOR     N0500    ELE         ELE-10          1     61.11%     55.56%         1        82.35%     52.94%         1     85.00%     50.00%
                             ELE-21          1     80.00%     53.33%         1        82.35%     58.82%         1     80.00%     30.00%
                             ELE-22                                                                             1     63.64%     63.64%
                             ELE-23
                             ELE-25
                             ELE-26
                             ELE-27          1     90.00%     60.00%
                             ELE-61                                          1        66.67%     50.00%
                 ELE Total                   3     74.42%     55.81%         3        80.00%     55.00%        3      78.43%     45.10%
                 MAC         MAC-55
                             MAC-56          1     83.33%     83.33%         1        85.71%     71.43%
                             MAC-57                                                                            1      80.00%     60.00%
                 MAC Total                   1     83.33%     83.33%         1        85.71%     71.43%        1      80.00%     60.00%
                 MAN         MAN-52          1     66.67%     41.67%
                             MAN-53
                             MAN-55
                             MAN-56          1     50.00%     50.00%         1        84.62%     38.46%        1      85.00%     65.00%
                             MAN-57                                                                            1      75.00%     37.50%
                             MAN-60
                             MAN-61                                          1        80.00%     80.00%
                             MAN-64
                             MAN-81
                MAN Total                    2     61.11%     44.44%         2        83.33%     50.00%        2      80.56%     52.78%
        N0500 Total                          6     71.64%     55.22%         6        81.54%     55.38%        6      79.35%     48.91%
NOR Total                                    6     71.64%     55.22%         6        81.54%     55.38%        6      79.35%     48.91%

Grand Total                                  6     71.64%     55.22%         6        81.54%     55.38%        6      79.35%     48.91%




                                                                 39
Electronics, Manufacturing and Machine Shop Technology Success rates; page 3 of 6


                                       08FAL                           09WIN                              09SPR
Loc     Dept     Disc        Course       Sect   Retention   Success      Sect      Retention   Success      Sect   Retention   Success
NOR     N0500    ELE         ELE-10          1     77.78%     44.44%                                            1     75.00%     54.17%
                             ELE-21          1     93.75%     68.75%                                            1     94.12%     76.47%
                             ELE-22
                             ELE-23
                             ELE-25
                             ELE-26                                                                            1      66.67%     42.86%
                             ELE-27          1    100.00%     66.67%
                             ELE-61          1     82.35%     82.35%
                 ELE Total                   4     85.19%     64.81%                                           3      77.42%     56.45%
                 MAC         MAC-55                                          1        80.00%     80.00%
                             MAC-56          1     90.00%     60.00%                                           1     100.00%     58.33%
                             MAC-57                                                                            1     100.00%     40.00%
                 MAC Total                   1     90.00%     60.00%         1        80.00%     80.00%        2     100.00%     52.94%
                 MAN         MAN-52          1     88.00%     68.00%
                             MAN-53                                                                            1      90.00%     80.00%
                             MAN-55                                          1        93.75%     75.00%
                             MAN-56          1     80.00%     60.00%                                           1      90.00%     80.00%
                             MAN-57                                                                            1      78.57%     78.57%
                             MAN-60
                             MAN-61          1     42.86%     42.86%
                             MAN-64
                             MAN-81
                MAN Total                    3     78.72%     61.70%         1        93.75%     75.00%        3      86.36%     79.55%
        N0500 Total                          8     82.88%     63.06%         2        90.48%     76.19%        8      83.74%     64.23%
NOR
Total                                        8     82.88%     63.06%         2        90.48%     76.19%        8      83.74%     64.23%

Grand
Total                                        8     82.88%     63.06%         2        90.48%     76.19%        8      83.74%     64.23%




                                                                 40
Electronics, Manufacturing and Machine Shop Technology Success rates; page 4 of 6

                                       09FAL                           10SPR                              10FAL
Loc     Dept     Disc        Course       Sect   Retention   Success      Sect      Retention   Success      Sect   Retention   Success
NOR     N0500    ELE         ELE-10          1     73.33%     56.67%         1        83.33%     70.83%         1     55.56%     51.85%
                             ELE-21          1     73.33%     70.00%         1        69.57%     69.57%         1     75.76%     51.52%
                             ELE-22          1     81.82%     31.82%
                             ELE-23          1     79.17%     66.67%
                             ELE-25                                          1        85.71%     80.95%
                             ELE-26                                                                            1      79.17%     62.50%
                             ELE-27
                             ELE-61          1    100.00%     75.00%                                           1     100.00%    100.00%
                 ELE Total                   5     78.07%     58.77%         3        79.41%     73.53%        4      73.96%     60.42%
                 MAC         MAC-55
                             MAC-56          1     90.00%     70.00%         1        70.00%     50.00%        1      90.91%     72.73%
                             MAC-57                                          1        62.50%     25.00%
                 MAC Total                   1     90.00%     70.00%         2        66.67%     38.89%        1      90.91%     72.73%
                 MAN         MAN-52          1     85.19%     77.78%                                           1      80.00%     44.00%
                             MAN-53
                             MAN-55
                             MAN-56          1     78.57%     71.43%         1        92.86%     85.71%        1      85.71%     78.57%
                             MAN-57                                          1        80.00%     60.00%
                             MAN-60                                                                            1      90.48%     71.43%
                             MAN-61          1     89.47%     73.68%                                           1      94.12%     70.59%
                             MAN-64                                          1        91.67%     75.00%
                             MAN-81
                MAN Total                    3     85.00%     75.00%         3        88.68%     73.58%        4      87.01%     63.64%
        N0500 Total                          9     80.98%     64.67%         8        81.29%     69.06%        9      80.43%     62.50%
NOR Total                                    9     80.98%     64.67%         8        81.29%     69.06%        9      80.43%     62.50%

Grand Total                                  9     80.98%     64.67%         8        81.29%     69.06%        9      80.43%     62.50%




                                                                 41
Electronics, Manufacturing and Machine Shop Technology Success rates; page 5 of 6

                                       11SPR                           11WIN                              11FAL
Loc     Dept     Disc        Course       Sect   Retention   Success      Sect      Retention   Success      Sect   Retention   Success
NOR     N0500    ELE         ELE-10          1     80.56%     63.89%                                            1
                             ELE-21                                                                             1
                             ELE-22
                             ELE-23          1     84.62%     76.92%
                             ELE-25                                                                            1
                             ELE-26
                             ELE-27          1     82.76%     82.76%
                             ELE-61                                                                            1
                 ELE Total                   3     82.42%     73.63%                                           4
                 MAC         MAC-55                                          1        91.67%     91.67%
                             MAC-56          1     57.14%     42.86%                                           1
                             MAC-57          1     58.33%     33.33%
                 MAC Total                   2     57.69%     38.46%         1        91.67%     91.67%        1
                 MAN         MAN-52                                                                            1
                             MAN-53
                             MAN-55                                          1       100.00%     82.35%
                             MAN-56          1     76.92%     46.15%                                           1
                             MAN-57          1     63.64%     63.64%
                             MAN-60
                             MAN-61                                                                            1
                             MAN-64                                                                            1
                             MAN-81
                MAN Total                    2     70.83%     54.17%         1       100.00%     82.35%        4
        N0500 Total                          7     75.89%     63.83%         2        96.55%     86.21%        9
NOR Total                                    7     75.89%     63.83%         2        96.55%     86.21%        9

Grand Total                                  7     75.89%     63.83%         2        96.55%     86.21%        9




                                                                 42
Electronics, Manufacturing and Machine Shop Technology Success rates; page 6 of 6

                                               Total           Total           Total
                                               Sect        Retention        Success
 Loc         Dept      Disc     Course
 NOR         N0500     ELE      ELE-10            13          74.02%         55.51%
                                ELE-21            12          78.85%         57.69%
                                ELE-22             2          75.76%         42.42%
                                ELE-23             3          83.33%         72.22%
                                ELE-25             3          82.14%         78.57%
                                ELE-26             3          77.78%         57.41%
                                ELE-27             4          88.00%         80.00%
                                ELE-61             5          88.37%         81.40%
                       ELE
                       Total                      45          78.59%         61.05%
                       MAC      MAC-55             2          88.24%         88.24%
                                MAC-56            12          81.67%         59.17%
                                MAC-57             7          70.45%         40.91%
                       MAC
                       Total                      21          79.56%         57.46%
                       MAN      MAN-52             8          85.07%         61.19%
                                MAN-53             1          90.00%         80.00%
                                MAN-55             2          96.97%         78.79%
                                MAN-56            13          82.61%         65.22%
                                MAN-57             7          74.70%         55.42%
                                MAN-60             1          90.48%         71.43%
                                MAN-61             5          83.33%         68.75%
                                MAN-64             2          91.67%         75.00%
                                MAN-81             1         100.00%        100.00%
                       MAN
                       Total                      40          84.06%         65.14%
             N0500 Total                         106          80.67%         62.05%
 NOR Total                                       106          80.67%         62.05%

 Grand Total                                     106          80.67%         62.05%




                                                                 43
44
                                                                    grade


                       correct
                                                                                                            correct
                                                                                                                                                                                                                     detailed below.




                                                                                                                                        Question number
                                                                                                                                                                        Question from the final exam




                                                    Question was deleted from the students
                                                                                                                                                                                                        evaluate. Results were surprising and are




                                                                                             Amount of students that got the question
                                                                                                                                                                                                       the Man 56 final (as shown at the right) to
                                                                                                                                                                                                       During the fall 2011 I choose one SLO from




     Percentage of students that got the question
                                                                                                                                                            Feed is the rate at which the
                                                                                                                                                           work moves into the cutter. In




                                                                                                       24
                                                                                                                                        19
                                                                                                                                                           other words the rate at which




                 100
                                                                                                                                                          the cutter moves past the work.
                                                                                                                                                                   True or False



                                                                                                                                                           In climb milling the work


                 72
                                                                                                       17
                                                                                                                                        21




                                                                                                                                                          moves in the same direction as
                                                                                                                                                            the rotation of the cutter




45
                                                                                                                                                           The spindle speed that should
                                                                                                                                                            be used when using a parting
                 80
                                                                                                       19
                                                                                                                                        25




                                                                                                                                                            tool is much less (about 1/3)
                                                                                                                                                                                                                                                                                                                                    Appendix B




                                                                                                                                                          then conventional turning; True
                                                                                                                                                                      or False


                                                                                                                                                           G00 with some feed rate is
                                                                                                                                                           used to: Is used to move the
                 72
                                                                                                       17
                                                                                                                                        28




                                                                                                                                                           machine quickly to a certain
                                                                                                                                                                      position
                                                                                                                                                                                                                                                                                                                   Assessment data for Fall 2011 Manufacturing 56




                                                                                                                                                            G01 with some feed rate is
                 56
                                                                                                       13
                                                                                                                                        29




                                                                                                                                                            used to: move the machine
                                                                                                                                                            slowly to a certain position.
                                                                                                                                                             G43 is used to check tool
                 52
                                                                                                       12
                                                                                                                                        30




                                                                                                                                                                      heights

                                                                                                                                                           G54 is used to: check fixture
                                                              x


                 48
                                                                                                       11
                                                                                                                                        31




                                                                                                                                                                    positions.

                                                                                                                                                            Cutting fluids serve several
                                                                                                       24
                                                                                                                                        70




                                                                                                                                                           purposes including: all of the
                 100




                                                                                                                                                                       above
                                                                                                                                                                                                                        Recognize NC machine codes and terminology for computerized machining and manufacturing.




                                                                                                                                                            Cutting speeds refers to the
                                                                                                                                                           distance, measured in feet or
                                                                                                                                                           meters, that a point (tooth) on
                 68
                                                                                                       16
                                                                                                                                        71




                                                                                                                                                           the circumference of a cutter
                                                                                                                                                            moves in one hour.; true or
                                                                                                                                                                        false
        This question was presented to the student's in the
     textbook and during the feedrate lecture. A handout was
                            provided.



       This question appeared on the safety test and on the
     final exam. This question was presented to the students
        during the safety lecture and on a handout that was
      passed out to each student. The instructor encouraged
                 each student to read the handout.




46
       This question was presented to the student's in the
              textbook and during the lathe lecture.




     These four questions are all about G-code programming
     and the language of programming. Students are given a
     few lines of code that let them test whether or not they
       have set the machine up correctly. Students create a
      video presentation of setting up the machine and use
       these lines of code during the video presentation. It
      would be interesting to examine each of the videos to
        see if they were using notes for these lines of code.
      When I presented these lines of code I discussed each
     word and presented what each word does. It would be a
      good idea to make sure the students take notes when
                   this presentation is preformed.



                         Common sense




        This question was presented to the student's in the
     textbook and during the feedrate lecture. A handout was
                            provided.
                  89
     Midterm                              Powered industrial truck operators must:




                  83
     Midterm                             The rated load capacity of overhead cranes:



                              Electrical equipment shall be free from recognized hazards that are
     Final exam             likely to cause death or serious physical harm to employees. Where is




                  94.2
                             this information stated in the OSHA Standards for General Industry?


                             Employees shall wear protective equipment for the eyes or face
     Final exam            wherever there is danger of injury to the eyes or face from electric arcs




                  100
                            or flashes or from flying objects resulting from electrical explosion.


                                How frequently must the periodic inspection of the use of the
     Final exam




                  76.7
                                       procedures for lockout/tagout be conducted?



                           In electrical systems, what is the significance of bonding, grounding and
     Final exam




                  41.8
                                                   the speed of interruption?



                           When servicing or maintenance requiring lockout/tagout extends over
     Final exam




47
                  76.5
                                                  more than one shift:


                            Container labeling is not required for pemanent secondary containers
                             (secondary containers for example could be a smaller container that
     Final exam
                  100


                           you would use to make it easier to lift the chemical after taking it out of
                                             a 55 gal drum). The answer is false


     Final exam                     Safety glasses can protect your eyes from corrosives.
                  70.6
                                                                                                         Identify common violations of OSHA standards and propose abatement actions.
                                                                                                                                                                                       Assessment data for Winter 2012 Manufacturing 55; 1 of 2




     Final exam                  The purpose of OSHA's Hazard Communication Standard is:
                  94.1




                               A shear used to cut heavy sheet steel is protected by sequential
                              operation. A gate that will exclude an employee’s fingers must be
                  47




     Final exam
                              lowered to within 1/4 inch of the stock prior to cutting. Two hand
                                  controls operated concurrently, must be used to lower the

                            Lockout/tagout must be used whenever employees are performing
                           servicing or maintenance of machines or equipment where they could
                  82




     Final exam
                           be injured by unexpected start-up or release of stored energy (unless
                                  the employee is protected by a machine guard or device).

                             Average for the SLO known as "Identify common violations of OSHA
                                          standards and propose abatement action
                  79.575
                                An employer believes he/she has been treated unfairly by being issued a




                  83
     Midterm                   citation and decides to contest the citation. He/she may do so by which of
                                                        the following procedures?


                                An employer believes he/she has been treated unfairly by being issued a




                  77
     Midterm                   citation and decides to contest the citation. He/she may do so by which of
                                                        the following procedures?

                                 Federal OSHA inspectors are authorized to “Red Tag” and shut down an




                  61
     Midterm
                                                            unsafe operation.
                                 In addition to OSHA, another government agency provides much of the




                  44
     Midterm
                                     regulatory information on compressed gases. What agency is it?




                  67
     Midterm                                           NIOSH is a division of OSHA
                               OSHA requires certain recordkeeping and reporting by employers. The most




                  83
     Midterm                   widely used recordkeeping requirement is a form designated as OSHA Form
                                                  300. What does the OSHA 300 do?




                  88
     Midterm                             OSHA standards for exits are which type of standard?
                               OSHA’s Safety and Health Program Management Guidelines consist of four




                  67
     Midterm
                                                               basic elements:
                                     The OSHA Act of 1970 is best described by which of the following




                  89
     Midterm
                                                                 statement?
                               The OSH Act General Duty Clause (Section 5) specifically requires which of




                  67
     Midterm
                                                                the following?
                                  The procedures of an inspection are specified by OSHA. Which of the




                  56
     Midterm
                                            following is not a routine feature of an inspection?
                               Which of the following best exemplifies the difference between vertical and




                  67
     Midterm
                                                           horizontal standards?
                                    Exit doors must swing in the direction of exit travel in which of the




                  67
     Midterm
                                                            following situations




48
                                   Which of the following types of vehicles are not covered by 29 CFR

                  83
     Midterm
                                                  1910.178, Powered Industrial Trucks?
                               Barricades do not have to be used in conjunction with safety signs where it
     Final exam   100           is necessary to prevent or limit employee access to work areas exposing
                                      employees to un-insulated energized conductors circuit parts.
                                  Class 00 rubber gloves are approved for work on circuits energized at
     Final exam
                  70.6


                                                          _________ volts or less
                  .2
                  88




     Final exam                     Electrical insulating gloves are manufactured in six classifications
                                Qualified persons shall be capable of working safely on energized circuits
                                    and shall be familiar with the proper use of special precautionary
     Final exam
                  100




                                  techniques, personal protective equipment, insulating and shielding
                                                      materials and insulated tools.
                                                                                                                                                                                                                Assessment data for Winter 2012 Manufacturing 55; 2 of 2




                                 The closest that an unqualified person may approach an overhead line
                   9




     Final exam
                  52.




                                                energized at 50kV or less is ________ feet

     Final exam                                     The hazards of electricity include:
                                                                                                             Locate and apply OSHA Safety and Health standards, policies and procedures for general industry.




                  94.1
                  63




     Final exam                            Match the word with the definition in the textbook


     Final exam                       NFPA uses a rating system on labels that show danger levels.
                  100




                               OSHA distinguishes between various classes of flammable and combustible
     Final exam                   liquids What is the easiest way to express the difference between
                  70.6




                                                    flammables and combustibles?


                                Average for the SLO known as "Locate and apply OSHA Safety and Health
                                       standards, policies and procedures for general industry.
                  75.5826087
                                    Assessment data for Fall 2011 Manufacturing 61/Electronics 61; 1 of 4

There are way too many SLOs for this class and many of the SLOs were written for when the class was in the CACT. We have different equipment and
many of these SLOs are hard to measure. During the fall 2012 semester I plan on presenting a complete update of all of the student learning outcomes
                                                             of the MAN/ELE 61 course.




                                                                        49
                   A sensor operates by converting light, heat, or mechanical energy into
         89
                                                     ______.




     x
         47                    Wavelengths of light are measured in ______.
         57     An opto-electronic device that converts light energy into electrical energy
                    Computer vision sensors use ______ to determine the distance to an




     x
         21
                           objectbased on the apparent size of the camera image.
                 An eddy current proximity sensor produces ______ in the small space of
         57
                                                 adetector unit.
         57                 Using the fingers to hold round objects is a ____ grip
         68              A ____ gripper delivers 360 degrees of clamping contact.
               Collision sensors are attached to the _____ to protect equipment from being
         68
                                          damaged during operation.
               Digital output ports permit digitial signals to be sent from a robot _____ to
         57
                                              equipment controls.
                   Machine vision systems use video cameras and computers to translate
         57
                                               _____ into images
               During ____, an analog to digital converter changes the analog signal of an




     x
         36
                                   image into an equivalent digital signal.
         57                        Most system problems are ____ failures
         52                      ______ is key to preventative maintenance.
         100            Robots can improve product quality because of their _____
         63         The money a business spends to purchase fixed assets is a(n) ____
                The money spent on replacing existing production or assembly methods to




     x
                                                                                               manufacturing to control and construct robotic machinery




         36      A programmablecurrent costs a general purpose programmable machine
                            reduce controller is is an investment known as ____
         63    possessing certain anthropomorphic (human like) characteristics. It consists
         78                 of restrict robot intelligence by and a manipulator.
                       Sensors computer control, power unit,slowing down processes.




     x
         47                      All objects emit infrared thermal radiation.




     x
         21     Sound sensors detect spatial relationships and provide depth information.
               Magnetic field sensors identify a change in a magnetic field withoutmaking
         89




50
                              physical contact with objects in the environment.
         63                     LEDs are solid-state opto-electronic devices.
                 Tools are end effectors that perform prehensile movements by grasping
         73
                                           objects and moving them
               Overload sensors detect obstructions or overload conditions within fractions
         94
                                                   of a second.
         63           A remote center compliance device is a type of collision sensor.
         52               Common I/O ports include interface and image analysis.
         63           Limit switches communicate information through output ports.
               Digital output ports allow a robot to interact with external equipment, such
         94
                         as a conveyor belt drive testing should be performed before
                     Thorough circuit and systemmotor, aolenoid, or another robot. a
         57        To gather information about a particular system, a technician should
                                                visualinspection.
         84     reference a schematic, service or maintenance manual, operating manual,
         63                              and an experienced operator.
               Scrap is a manufactured part that is reconditioned and put back intoservice.
                                                                                                                                                                                             Assessment data for Fall 2011 Manufacturing 61/Electronics 61; 2 of 4




               Intelligent machines can do the same job as trained workers and save labor
     x



         25
                                       costs are unpleasant or workers.
                When working conditionsby replacing those unsafe, worker productivityis
         100
                                                    affected.
               Automated equipment requires consistently uniform components to function
         84
                                                   efficiently.
                    Most automated equipment is dedicated, or designed to perform one
         68
                                                    function.
               A matrix begins by stating the problem and proposing a solution supported
         78
                                                   of robots on
                 Simply increasing the numberby rationale. an assembly line translates to
         84
                                increased product of artificial intelligence are
                     The three area classificationssales and company profits. sensing,
     x




         21
                                                                                                                                                          This page represents the average that the students understood the SLO: Describe how computers, electronics and machining are used in




                                          programming, retraining workers is an important
                  To remain efficient and competitive,and interface
         73
                                 activity for every high technology company
                  In order to perform multiple operations on the same line, vision-guided
         68
                                     robots must constantly be re-tooled.
         88                       What is a programmable logic controller?
         64                                  Average for this SLO
                                          Assessment data for Fall 2011 Manufacturing 61/Electronics 61; 3 of 4
This page represents the average that the students understood the SLO: Perform basic measurements using a multi-meter including: Voltage, Resistance,
and Amps
                         What is the equation for power?



                                                           Average for this SLO
    What is ohm's law?
    57



                         83



                                                           70




                                                                                  51
                                          Assessment data for Fall 2011 Manufacturing 61/Electronics 61; 4 of 4
This page represents the average that the students understood the SLO: Use proper circuit board soldering techniques.
    A ____ solder should be used for all electronic circuit work.



                                                                    Average for this SLO
    68




                                                                    68




                                                                                           52
                  Innovation is a business process that brought invention to commercial
                  use. ____________________________ is the acquisition and
                  application of existing innovations (diffusion). It links engineering,
     42
                  science, and management disciplines to plan, develop, and implement
                  technological capabilities to shape and accomplish the strategic and

                                                                                                enterprise
                  operational objectives of an organization.
                  Many growth phenomena in nature show an exponential curve. Any
                  single technical approach is limited in its ultimate performance by
     28
                  chemical and physical laws that establish the maximum performance
                  that can be obtained using a given principle of operation.
                  Innovations that have greater relative advantage, compatibility,
                  trialability, and observability, along with less complexity, generally will
     100          be adopted over innovations that do not. ____________________ is
                  the degree to which an innovation is perceived as being better than
                  the idea it supersedes.
                  Innovations that have greater relative advantage, compatibility,
                  trialability, and observability, along with less complexity, generally will
     28           be adopted over innovations that do not. ____________________ is
                  the degree to which an innovation is perceived to be consistent with
                  the existing values, past experiences and needs of potential adopters.
                  Innovations that have greater relative advantage, compatibility,
                  trialability, and observability, along with less complexity, generally will
     85
                  be adopted over innovations that do not. ____________________ is
                  the opportunity to experiment with the innovation on a limited basis.
                  Innovations that have greater relative advantage, compatibility,
                  trialability, and observability, along with less complexity, generally will
     71
                  be adopted over innovations that do not. ____________________ is
                  the degree to which an innovation is perceived as difficult to use.




53
                  Innovations that have greater relative advantage, compatibility,
                  trialability, and observability, along with less complexity, generally will
     57
                  be adopted over innovations that do not. ____________________ is
                  the degree to which the results of an innovation are visible to others.
                  For 4 years, Ford developed, produced, and sold five different engines
                  (2-6 cylinders) in a factory of trade craftsmen working with general
                  purpose machines. This is an example of the ____________________
     85
                                                                                                                                                       Assessment data for Fall 2011 SCT 3; 1 of 3




                  stage of innovation. During this stage, the level of prototype (product)
                  innovation is high. This is because firms modify, change, and update
                  the product in an effort to establish a dominant design
                  Which of the following statements best explains this diagram shown
     85
                  above_____:
                  Corporate attitudes imply strategic preferences. In class, we discussed
                  corporate attitudes in terms of its “dominant orientation,” “pattern of
     71           diversification,” “attitude towards growth,” and “competitive
                  priorities.” Which of the following best describes an organization’s
                  Corporate attitudes imply strategic preferences. In
                  dominant orientation as “market oriented”_____: class, we discussed
                  corporate attitudes in terms of its “dominant orientation,” “pattern of
     57           diversification,” “attitude towards growth,” and “competitive
                  priorities.” Which of the following patterns of diversification best
                  describes “vertical integraton”_____:
                  Corporate attitudes imply strategic preferences. In class, we discussed
                  corporate attitudes in terms of its “dominant orientation,” “pattern of
                                                                                                issues in the management of operations technology and the role of technology and operations as the ultimate competitive weapons of a business




                  diversification,” “attitude towards growth,” and “competitive
     100
                  priorities.” Which of the following competitive priorities best describes
                                                                                                This page represents the average that the students understood the SLO: Apply critical thinking skills to establish the crucial importance of crosscutting




                  Allstate Chemical Company (ACC) before the company undertook a
                  strategic shift towards specialty chemicals in the 1980s_____:
     67.4166667   Average for this SLO
         71      A programmable controller is a general purpose programmable machine
                 possessing certain anthropomorphic (human like) characteristics. It
                 consists of computer control, power unit, and a manipulator.
         71      CAD/CAM is probably the most common and best known acronym in
                 contemporary manufacturing. The acronym stands for Computer-
                 assisted design and computer-assisted-manufacturing.
                 The flexible manufacturing is a configuration of computer-managed
         42
                                                                                               chain management.


                 numerical work stations where materials are automatically handled and
                 machine loaded. The processing stations are connected together by an
                 ____________________ is a digitallycontrolled by a central computer.
                 automated part handling system, all operating electronic apparatus
         71      which uses is capable of processing a variety of different part types
                 This systema programmable memory for the internal storage of
                 instructions by implementing specific functions such as logic sequencing,
                 simultaneously under NC program control at the various workstations.
                 timing, labor is required for the to control,         digital or analog
                 Human counting, and arithmeticfollowingof through infrastructure raw
         71                                                    the two
                 ____________________________ is one support functions: loading
                                          various types of machines or processes.
                 input/output modules, unloading finished parts, changing tools and
                 parts onto the system, in class. This technology covers AGVs,
                 technologies mentioned
                 settings, and equipment maintenance and repair. The system is
                 conveyors, AS/RS, and robotics.
        100      A coordinate measuring machine (CMM) consists of a contact probe and
                 principally used in high-volume, low variety production.
                 a means of positioning the probe in three-dimensional space relative to
                 the surfaces and features of a work piece. In operation, the location and
                 A coordinate measuring machine (CMM) consists of a contact probe and
        100      position of the probe is accurately and precisely recorded to obtain
                 a means of positioning the probe in three-dimensional space relative to
                 dimensional data concerning the part geometry.
                 the surfaces and features of a work piece. In operation, the location and
         14
                 The Auto-ID Center is is accurately and precisely recorded created in
                 position of the probe an industry-funded research center to obtain
                 1999 at M.I.T. to concerning industry could use The technology to
                 dimensional datalook at how the part geometry.RFID above statement is
                 improve the management(True or False) chain officially. It closed on
                 ____________________. of the supply
                 The following diagram shows the structure of the research center are
                 October 26th, 2003 and the university labs of the
         85      ____________________. ItLab. Thethe reader readshasan RFID tag its
                 now referred to as Auto ID is what Auto-ID Center in completed
                 attached transferred (item, cases, pallets, etc.). With up to 96 bits, it
                 work andto an object its technology to ____________________, which




54
                 uniquely identifies the object. standards going forward. It is
         85
                 will administer tag does not have a power source (no battery). The RF
                 A passive RFID and develop EPC
                 commercializing reader is “harvested” by the ____________________,
                 energy from the the EPC™ technology.
                 and the energy is used to power up the microchip, to reflect its signals to
                 The ____________________is a middleware system located between a
                 the reader.
        100      reader (or multiple readers) and the applications in RFID systems.
                 Applications operate on top of, or within, the middleware operating
                 environment. The middleware passes requests from the applications to
                                                                                                                                                      Assessment data for Fall 2011 SCT 3; 2 of 3




        100      The ____________________is an tag identifiers and infrastructure that
                 the reader(s) and receives unique EPCglobal Networkpossibly other data
                 enables companies to store data associated with the EPC in secure
                 from sensors, and passes that information to the applications. The
                 databases on the Web. fundamental functions integrated into its design,
                 middleware has several
                 According to Global Commerce Initiative (GCI), ____________________
        100      some “continuous harmonizationaggregation and counting of two data.
                 is the of which are data filtering, of data attributes between tag or
                 Thesedifferent systems, with the end result being the handle the
                 more fundamental functions are required in order to data attribute
                 extremely large quantitiesof the systems.” The process involves
                 valuestype thesystemin all of data that RFID systems can generate
                 What are of same is shown below_________________.
         85      through the continuousproduct information, in a standardized format,
                 electronic exchange of interrogation of tags.
                 between a manufacturer and the Registry, and from a retailer and the
         71      28. What
                 Registry. type of system is this above __________________________.


                 What kind of system is______________________________.
        100


        100      What type of truck is this you see below__
                                                                                               This page represents the average that the students understood the SLO: Discuss the technologies and standards for collaborative commerce in supply




     80.3529412 Average for this SLO
                   Which of the following statements is true in a “product focused” factory
        42                                ____________________:


                    The basic notion of “economies of scope” is that the cost of producing a
        100         bundle of different product configurations on a particular piece of multi-
                  mission equipment is not much higher than the cost of producing the same
                                                                                                   global competitiveness;




                       items on various pieces of specialized equipment designed for each
                   The basic notion of “economies of scale”is the primary justification for
                       particular product configuration. This is that as a plant gets larger and
        57         volume in a flexible manufacturing system.The above statement is _____:
                  investingincreases, the average cost per unit of output drops because each
                     succeeding unit absorbs part of the fixed costs. The above statement is
                                                       _____:
                  In plants designed to mass produce products at the small unit cost possible,
        71          the production lot sizes tend to be very large (to spread the changeover
                                cost to more units.) The above statement is _____:

                     U.S. automobile manufacturers in the 1970's were not able to convert
        100         plants from 8-cylinder engine production to 6-cylinder-engines because
                                           ____________________:

                       V110 is “a neat molecule with no use.” It is an example of _____:
        71


                    The central R&D (Research and Development) at the Allstate Chemical




55
        42                               Company is called_____:


                    The basis of competition for commodity chemicals is cost and delivery.
        57        Thus, the need to invest on a large facility to take advantage of economies
                   of scale. Specialties, on the other hand, allowed a company to forego in-
                   house manufacturing, particularly in the early, risky stages of a product’s
                                                                                                                                                          Assessment data for Fall 2011 SCT 3; 3 of 3




                    Facility layout types include process layout, product layout, and fixed-
                                                        life
        14          position layout. An application of Group Technology is to group similar
                                       machines into manufacturing cells.

                  The ____________________________ is the ideal system for high-variety,
        71                             low-volume operation:


                   The ____________________is an EPCglobal Network service that allows
        100        companies to search for every reader that has read a particular RFID tag.


                                              Average for this SLO
     65.9090909
                                                                                                   This page represents the average that the students understood the SLO: Identify strategic decision choices, operations strategies and their relevance to
                                       Assessment data for Fall 2011 ELE 25; 1 of 3
RECORD of ELE-
25                       SLO-1==>           MT MT MT FX FX FX FX                            SLO-2==>            MT MT FX
SLO ASSESSMENTS   Convert between binary    u1    u1    u1                            Explain Dig Logic Gates   u1   u1
                       and decimal &        Q     Q     Q     Q   Q    Q Q             and/or/nan/nor,etc       Q    Q    Q
                   recognize binary codes    3     5     6    4   6    34 35             use truth tables        5    6   4
Student 1                 71%                1    1     0 1 0 1 1                             67%               1    0 1
Student 2                  0%                                                                 0%
Student 3                 86%                1    1     1     1   0    1    1                100%               1    1    1
Student 4                 57%                0    1     0     1   0    1    1                 67%               1    0    1
Student 5                100%                1    1     1     1   1    1    1                100%               1    1    1
Student 6                100%                1    1     1     1   1    1    1                100%               1    1    1
Student 7                 57%                1    1     0     1   0    1    0                 67%               1    0    1
Student 8                 43%                1    1     1     0   0    0    0                 67%               1    1    0
Student 9                 86%                1    1     1     1   1    1    0                100%               1    1    1
Student 10                86%                1    1     1     0   1    1    1                 67%               1    1    0
Student 11                71%                0    1     1     1   0    1    1                100%               1    1    1
Student 12                57%                0    0     1     1   0    1    1                 67%               0    1    1
Student 13                86%                1    1     1     1   0    1    1                100%               1    1    1
Student 14                29%                0    0     0     0   0    1    1                 0%                0    0    0
Student 15                29%                0    0     1     0   1    0    0                 33%               0    1    0
Student 16                71%                1    0     1     1   0    1    1                 67%               0    1    1
Student 17                71%                0    1     1     1   0    1    1                100%               1    1    1
Student 18               100%                1    1     1     1   1    1    1                100%               1    1    1


                                                             56
Student 19          57%               1   0     0     1       0   1   1           33%              0   0   1
Student 20          86%               1   1     1     1       0   1   1          100%              1   1   1
Student 21          29%               1   0     1     0       0   0   0           33%              0   1   0
Student 22          71%               1   1     1     1       0   1   0          100%              1   1   1
Student 23          71%               1   0     1     1       0   1   1           67%              0   1   1
Student 24          86%               1   1     1     1       0   1   1          100%              1   1   1
Student 25          43%               0   0     1     0       1   0   1           33%              0   1   0
             Above, % indicates the                                       Above, % indicates the
              frequency of success        1 = did it, above                frequency of success
             on this SLO out of the       0 = did not                     on this SLO out of the
               given opportunities                                          given opportunities
              to demonstrate this.                                         to demonstrate this.




                                                    57
                                      Assessment data for Fall 2011 ELE 25; 2 of 3
RECORD of ELE-
25                   SLO-3 Evals==>         FX FX FX FX FX FX FX FX FX FX FX
SLO ASSESSMENTS   Identify, discuss eqt &
                   characteristics & ops    Q    Q    Q Q Q Q Q Q Q Q Q
                   of integrated circuits   7    9    11 12 13 16 18 19 36 37 38
Student 1                 92%               1 1 1 1 1 1 1 1 1 1 0
Student 2                  0%
Student 3                 83%               0    1    1    1    0   1    1    1      1   1   1
Student 4                 75%               0    1    0    1    1   1    1    1      1   1   1
Student 5                 83%               1    1    1    1    1   1    1    1      0   1   0
Student 6                 67%               0    0    1    1    1   1    1    1      1   1   0
Student 7                 67%               0    1    0    1    1   1    1    1      0   1   1
Student 8                  0%               0    0    0    0    0   0    0    0      0   0   0
Student 9                 67%               0    1    1    1    1   0    1    1      1   0   0
Student 10                67%               0    1    1    1    1   1    1    1      0   0   0
Student 11                92%               0    1    1    1    1   1    1    1      1   1   1
Student 12                50%               0    1    0    0    1   1    1    1      0   1   0
Student 13                83%               0    1    1    1    1   1    1    1      1   1   1
Student 14                42%               0    0    1    1    0   1    1    1      0   0   0
Student 15                25%               0    0    0    1    0   1    0    0      1   0   0
Student 16                75%               0    1    0    1    1   1    1    1      1   1   1
Student 17                83%               1    1    1    1    1   1    1    1      1   1   0
Student 18                75%               0    1    1    1    0   1    1    1      1   1   1


                                                          58
Student 19          58%               1   1   0   1    1   1   1   0   1   0   0
Student 20          58%               0   1   0   1    0   0   1   1   1   1   1
Student 21          67%               0   1   1   1    1   1   1   1   0   1   0
Student 22          50%               1   0   1   0    1   0   1   0   1   0   1
Student 23          50%               0   1   1   1    0   1   1   1   0   0   0
Student 24          67%               0   1   1   1    0   1   1   1   0   1   1
Student 25          42%               0   1   0   0    0   1   0   1   1   1   0
             Above, % indicates the
              frequency of success
             on this SLO out of the
               given opportunities
              to demonstrate this.




                                                  59
                                   Assessment data for Fall 2011 ELE 25; 3 of 3
RECORD of ELE-
25                      SLO-4==>            MT MT MT MT MT MT FX FX                       FX           SLO-5==>               FX FX FX FX
SLO ASSESSMENTS   Use Boolean Algebra to     u5   u5    u5    u5   u5    u5                     Discuss Apps & Ops of
                  express ops & simplify     Q    Q     Q     Q    Q     Q    Q Q         K-    combo logic & sequen-         Q Q Q Q
                    logic circuit design      2    3     4     6    8     9   23 32       map   tial ctrs, shift regs, etc.   25 26 27 28
Student 1                 44%                1     1    1     0     0    0 0 0 1                         80%                  1 0 1 1
Student 2                 0%                                                                              0
Student 3                 67%                1     0    0     1     1    1        0   1   1               5                   1   1   1   1
Student 4                 44%                0     0    1     0     1    0        1   0   1               4                   1   1   1   1
Student 5                 89%                1     1    1     0     1    1        1   1   1               2                   1   0   0   0
Student 6                 67%                1     1    1     0     1    0        1   0   1               3                   1   0   0   1
Student 7                 56%                0     0    1     1     0    1        1   0   1               2                   0   0   1   0
Student 8                 44%                1     1    1     0     1    0        0   0   0               0                   0   0   0   0
Student 9                 44%                0     0    1     0     0    0        1   1   1               0                   0   0   0   0
Student 10                78%                1     1    1     0     1    0        1   1   1               3                   1   0   1   1
Student 11                78%                1     0    0     1     1    1        1   1   1               3                   0   1   1   0
Student 12                67%                1     1    0     1     0    1        1   0   1               2                   0   0   0   1
Student 13                67%                1     1    1     0     1    0        1   0   1               1                   0   0   0   0
Student 14                44%                0     1    0     0     1    0        0   1   1               2                   0   0   0   1
Student 15                44%                1     1    1     0     1    0        0   0   0               1                   0   0   0   0
Student 16                67%                1     1    0     0     1    1        1   0   1               3                   1   0   1   0
Student 17                78%                1     1    1     0     1    0        1   1   1               4                   1   1   1   0
Student 18                67%                1     0    1     1     1    0        1   0   1               3                   1   0   1   0


                                                       60
Student 19          44%               0   1   1    0   0   1   0   0   1             2              0   0   0   1
Student 20          89%               1   1   1    1   0   1   1   1   1             5              1   1   1   1
Student 21          44%               1   0   1    0   0   1   0   0   1             3              1   1   0   0
Student 22          44%               0   0   1    0   1   0   1   0   1             3              1   0   1   0
Student 23          67%               1   1   1    0   0   0   1   1   1             2              0   1   0   1
Student 24          67%               1   1   1    0   1   0   1   0   1             1              0   0   0   0
Student 25          44%               0   1   0    0   1   0   1   0   1             1              0   0   0   0
             Above, % indicates the                                        Above, % indicates the
              frequency of success                                          frequency of success
             on this SLO out of the                                        on this SLO out of the
               given opportunities                                           given opportunities
              to demonstrate this.                                          to demonstrate this.




                                              61
Assessment data for Fall 2011 MAN 64




                62
                                                                 Appendix C
                                          Classes I plan on attending using NSF and Perkins money

                                                                                        Course
Location        Address                                 distance from station           number      Description                                       D
CA, Anaheim     2125 E. Katella Ave                     .2 miles                        CCp298      Compact logix fundamentals and TS
CA, Anaheim     2125 E. Katella Ave                     .2 miles                        CCP196      PanelView and Panelbuiler32 application
CA, City of     1225 S. Johnson Dr. City of industry,   53 min using bus would
Industry        CA 91745                                suggest drive                   CCV204      Factory Talk View ME-PanelView plus prog
CA, Buena       6530 altura blvd Buena Park CA          2.2 miles or take the number
Park            90620                                   25 bus                          CCP151      RSLogix 5000 Basic Ladder programming
CA, Buena       6530 altura blvd Buena Park CA          2.2 miles or take the number
Park            90620                                   25 bus                          CCV204      Factory Talk View ME-PanelView plus prog
                                                                                                                                                      C
                                                                                                    RS Logix 5000 Software motion                     tr
                                                                                        CCA174-
                                                                                        ld          Powerflex 400/70/700 AC drive field start up for wat
                                                                                        CCA171-     Powerflex 400 AC drive field start up for HVAC
                                                                                        LD          applications

Autin, Tx                                                                                           Lab view FPGA

San Diego, CA                                                                                       Lab view FPGA

Mountain View, CA                                                                                   Lab view FPGA




                                                                    63
                                                               Appendix D

                                                      Computer numerical control jobs

                      According to http://entry-level-pr-jobs.jobamatic.com/a/jobs/find-jobs/q-cnc/l-norco%2C+CA
There are at least 110 computer numerical control positions within a 25 mile radius of Norco. The dates of these jobs are from January to
                                                                the present




                                                                                                                  CNC Programming

                                                                                                                                    Mastercam
                                                                                                                                                Multiaxis


                                                                                                                                                            Lathe


                                                                                                                                                                    Mill
                                                                             CNC Lathe Operators Posted
                                                                          on:02/28/12 Job Number: 300125-
                                   Volt Information                      3017-7-295786 Add to Cart Email ...
2-Mar CNC Lathe Operators                                  Irvine, CA                                                                                       1
                                       Sciences                              experience in setting up and
                                                                                operating CNC Lathes;
                                                                         understanding 1 - 2 controls;... more
                                                                            various fabrication techniques
                                                                            specifically CNC programming,
         $55,000 Salary / IT
                                                                            machining, and tooling. Direct
2-Mar    Project Manager /            Appleone             Irvine, CA                                               1
                                                                           CAD/CAM software experience in
              Irvine -
                                                                           product development, sales and
                                                                           support roles Education:... more
                                                                             CCS/ Channel Department /
         Senior Production                                                    Business Unit CNC Location
 26-
          QA Claims/ SKU                 CBS               Irvine, CA    California - Irvine Job Description 1.
 Feb
              Analyst                                                    Customer claims processing insuring
                                                                          completeness, accuracy and timing


                                                                    64
                                                                       coinciding with... more




                                                                      A large aerospace company is
                                                                 seeking (8) CNC lathe machinist for a
25-                                                  Fontana,          3rd shift in Rancho ... years
        CNC Machinist           Allegis Group                                                            1
Feb                                                    CA        experience operating and setting up
                                                                     a CNC machines. The candidate
                                                                            must have... more
                                                                    CNC Lathe Operator Large Valve
                                                                   manufacturing company seeks for
25-                                                   Costa           CNC Lathe with Mazatrol ... in
      CNC Lathe Operator     Advantage Staffing                                                          1
Feb                                                  Mesa, CA     setting up, operating and adjusting
                                                                 CNC lathe equipment with Mazatrol
                                                                             controls... more
                                                                    CNC Lathe and/or Mill Machinist
                                                                      CNC Set-Up and/or Operator
25-    CNC Lathe and/or                               Santa      experience requiredGood discipline,
                            Ys Controls / Maul Mfg                                                       1   1
Feb     Mill Machinist                               Ana, CA       dependability, record keeping and
                                                                  communication required Good long
                                                                        term opportunity... more
                                                                  CNC Vertical Turret Lathe Operator
                                                                 Large Valve manufacturing company
25-   CNC Vertical Turret                             Costa
                             Advantage Staffing                     seeks for CNC ... up, operate and    1
Feb    Lathe Operator                                Mesa, CA
                                                                      adjust controls on CNC VTL in
                                                                 accordance with engineering... more




                                                            65
                                                                extrusion process, metal forming,
                                                                 CNC machining, and Geometric,
24-                                                                Dimensioning and Tolerancing
      Process Engineer     Allegis Group      Irvine, CA
Feb                                                                (GD&T) - Be able to interpret
                                                                  customer requirements such as
                                                                Scope of Work (SOW) into... more
                                                               CNC Programmer Automobile parts
                                                                     manufacturer seeks a CNC
                                                                   Programmer/ Machinist for a
19-
      CNC Programmer     Advantage Staffing   Irvine, CA            contract to hire position.The      1   1
Feb
                                                               position entails programming using
                                                                Mastercam and their machinery...
                                                                                more
                                                                           CNC Machinist
                                                                ResponsibilitiesReview production
                                                Lake                  requirements for weekly
19-
       CNC Machinist            Red            Forest,        demandSetup required fixtures and        1
Feb
                                                 CA            toolingLoad required programs and
                                                                   origin locationsDimensionally
                                                                            verify... more
                                                                   equipment, multi-axis milling
                                                                      machines, CNC controlled
18-    Maintenance                            Riverside,      equipment, boilers chillers, ... *Must
                             Goodrich                                                                          1       1
Feb     Mechanic                                 CA            have a High School Diploma or GED
                                                                *CNC repair, troubleshooting and
                                                                          alignment. more
                                                              orrective Action Process" Experience
                                                                     in the automotive industry
16-
      CNC Programmer         Randstad         Irvine, CA         Understanding of GD&T to ANSI         1       1   1
Feb
                                                                standardsIn-depth knowledge of 4
                                                                  or 5 axis CNC machining center



                                                         66
                                                                    programming (Lathe... more




                                                                   Machinist/Operator (5-Axis) S&B
                                                                   Filters is seeking a CNC Operator
16-     Machinist/Operator                         Fontana,         who is very familiar wit ... and
                                 S&b Filters                                                           1   1   1
Feb          (5-Axis)                                CA           qualifications:- Experience with 5
                                                                axis CNC Mills (HAAS with Trunnion
                                                                              Table);... more
                                                                CNC 5-Axis Programmer Looking for
                                                                  an experienced programmer who
         CNC Master Cam                            Fontana,     can program tooling set to run on 5-
5-Feb                            S&b Filters                                                           1   1
           Programmer                                CA           axis HAAS vertical mills. The HAAS
                                                                equipment utilizes a Trunnion Table
                                                                              for the... more
                                                                   CNC Mill Operator - 2nd and 3rd
                                                                    shift CNC Horizontal MillMAIN
                                                   Rowland
        CNC Mill Operator -                                        FUNCTION:Sets up and operates
1-Feb                         Advantage Staffing   Heights,                                                    1
         2nd and 3rd shift                                         C.N.C machines to manufacturer
                                                     CA
                                                                 parts per blueprints on 2nd (2:30 -
                                                                        11:00 PM)or 3rd... more
                                                                of Precision Machined Components
          Manufacturing                                             CNC Programming of Machines
13-         Engineer -                                           Tooling & Fixture ... dimensioing &
                                  Randstad         Irvine, CA                                          1   1
Dec       Engineering &                                          tolerancing) MUST have some CNC
        Systems Design job                                      Programming experience (4 axis or 5
                                                                               axis)... more




                                                           67
                                                           operating large mills, lathes, and
                                                          CNC machines. . Requires a broad
                                             City of
 15-       Conventional                                   knowledge of machining practices
                                Acromil     Industry,                                                1   1
 Apr        Machinist                                      and procedures, a high degree of
                                               CA
                                                            skills and technique, and long-
                                                                      term... more
                                                         CNC mill machines in-house, utilizing
                                                            the CNC program, tooling, and
                                             City of
24-       CNC Machinist                                       gauging assigned to ... level
                                Acromil     Industry,                                            1       1
Mar        (Night Shift)                                   machining classes and/or formal
                                               CA
                                                          CNC training. Requires 5 - 10 years
                                                                     of CNC... more


                                                            CNC Programmer / CNC Lathe
         CNC Programmer /
                                                             Programmer to local Orange
              CNC Lathe
                                            Anaheim,       Engineering firm in Anaheim ...
4-Mar   Programmer to local   Cybercoders                                                        1   1
                                               CA             Required Skills CNC Lathe
        Orange Engineering
                                                         programming, CNC Lathe operating,
          firm in Anaheim.
                                                           CNC Lathe set-up, Print... more


                                                         polishing, sorting). Provide feedback
                                                            to CNC machine operator(s) in
                                             City of
 17-     Bench Machinist                                  regards to product quality so that
                                Acromil     Industry,
 Feb        (Deburr)                                       adjustments to machine can be
                                               CA
                                                          made. Support team environment
                                                                 including any... more




                                                    68
              CNC Lathe                                          CNC Lathe Programmer / Operator
            Programmer /                                           to join long standing reputable
         Operator to join long                       Anaheim,       Engineering firm in Anahei ...
5-Feb                              Cybercoders                                                           1       1
          standing reputable                            CA            Required Skills CNC Lathe
          Engineering firm in                                    programming, CNC Lathe operating,
              Anaheim.                                             CNC Lathe set-up, Print... more


                                                                      MathCAD,Excel ,Gibbs CAM,
                                                                       generate CNC programing.
            Manufacturing                            Redlands,   Education and experience: Bachelor
17-Jan                              Exact Staff                                                          1
              Engineer                                  CA       Degree in engineering /8-10 related
                                                                 verifiable experience and/or training
                                                                          or equivalent... more
                                                                 either GibbsCAM or MasterCAM and
                                                                    must have CNC Mills Machinist
                                                     Corona,     background. The ideal ... processes -
3-Mar    CNC PROGRAMMER          Amtec Engineering                                                           1   1   1
                                                       CA        Machining experiences on both CNC
                                                                     lathes and mills -Solid working
                                                                           knowledge... more
                                                                   2nd shift CNC Set up professional
                                                                 must have CNC set up experience in
                                                     Corona,           both CNC milling and ... The
3-Mar    CNC Setup Operator      Amtec Engineering                                                                   1
                                                       CA             qualified candidate will have
                                                                    experience setting up both CNC
                                                                            Mills and... more




                                                            69
                                                                Human Capital is currently recruiting
                                                                    for a CNC Mills Machinist for a
                                                      Corona,    contract to hire position located in
3-Mar   CNC Mill Machinist     Amtec Engineering                                                                     1
                                                         CA     Corona, CA. THe qualified candidate
                                                                will be available to work 2nd shift...
                                                                                 more
                                                                  Amtec Human Capital is currently
                                                                     seeking a CNC Lathe Machine
                                                      Corona,       Operator for a contract to hire
3-Mar   Machine Operator       Amtec Engineering                                                                 1
                                                         CA      position located in Corona, CA. The
                                                                   qualified candidate, under close
                                                                       supervision, with... more
                                                                  Position: CNC Machine Operator
                                                                  Entry Level: Must be familiar with
          CNC Machine        Www.mattsonresources.     Garden    the basic operation of ... be able to
2-Mar
            Operator                com              Grove, CA run computer numerical controlled
                                                                   CNC Machines such as, but not
                                                                          limited to ;... more
                                                                       We are in need of a CNC
                                                                  Programmer/R&D Machinist: We
                                                                  are looking for a mid-level person
2-Mar   CNC Programmer         Remx Engineering      Irvine, CA                                          1   1
                                                                who has experience with Mastercam
                                                                X5. Solid Works is a plus. Must have
                                                                      the experience and... more
                                                                      with CNC programming and
                                                                operation of CNC machines, manual
                             Www.mattsonresources.     Garden milling experience, hands on manual
2-Mar      Tool Maker                                                                                    1   1       1
                                    com              Grove, CA     tool manufacturing experience.
                                                                Mastercam experience preferred. 5+
                                                                        years experience. more




                                                             70
                                                             and providing the necessary input to
                                                                 allow CNC programmers and
                                                Fontana,      production to meet the ... products
2-Mar     Sales Engineer    Amtec Engineering                                                         1
                                                  CA          including information required for
                                                              CNC programmers * Communicate
                                                                    with production... more
                                                               Must have a minimum of 5 years
                                                                 experience with conventional
           Journeyman                           Redlands,
2-Mar                         J&e Machine                    machining. Proficiencies in Mill work        1   1
            Machinist                              CA
                                                                are our #1 priority at this time,
                                                             Lathe and CNC are secondary. more
                                                             of manufacturing processes such as
                                                               Castings, CNC machining, Multi-
          Supply Chain
                                                             spindle machining, CMM inspection,
2-Mar     Manufacturing           Eaton         Irvine, CA
                                                             secondary process knowledge, etc..-
            Engineer
                                                             Previous experience in getting work
                                                                         done... more
                                                                company in Irvine is seeking an
                                                              experienced CNC Programmer and
               Cnc
                                                               Machinist. Qualified ... is familiar
1-Mar   Programmer/machin     Select Staffing   Irvine, CA                                            1       1
                                                                  with milling or turning CNC
               ist
                                                                machines, must be proficient in
                                                                         either... more
                                                             Machinist-CNC Mill / Setup Excellent
                                                              opportunity with our client, a small
                                                                 Engineering firm ... **3 years
1-Mar     Machinist-CNC         Pridestaff      Irvine, CA                                                    1
                                                             minimum in set-up and operationof
                                                                  CNC Mills**Ability to read
                                                                   blueprints**Some... more




                                                        71
                                                                       metal cutting Metal fabrication
         Manufacturing                                               processes: CNC, castings, tool jig /
           Engineer ,                                   Irwindale, fixture design, weldments. This is an
1-Mar                        Pacific Technical Search
         Mechanical CNC                                     CA       immediate Contract opportunity.
          Fabrication                                              Please include resume as Word Doc.
                                                                                with... more
                                                                     manual mills, lathes, grinders and
                                                                   have CNC programming experience.
                                Volt Information          Corona,             Candidates are ...
1-Mar       CNC Lead                                                                                          1   1   1
                                    Sciences                CA     http://jobs.volt.com. Requirements:
                                                                         Related CNC programming
                                                                     experience, HS diploma or... more
                                                                       section of computer numerical
                                                                   control (CNC and NC) machinery and
                                                                      other equipment. ... procedures
1-Mar     Technician 13      Johnson Service Group      Irvine, CA
                                                                   including installation of CNC and NC
                                                                    Machinery. Calibrate, adjust and...
                                                                                    more
                                                                   they function and work on machines
                                                                    (lathes, CNC, drill presses, etc.) in a
        Metalworking Sales      Stroker, Jones &         Ontario,
1-Mar                                                                 manufacturing environment. We               1
            Engineer               Associates               CA
                                                                   have great salespeople who sell our
                                                                     products but are not very... more
                                                                   they function and work on machines
                                                                    (lathes, CNC, drill presses, etc.) in a
         Sales Engineer -       Stroker, Jones &           Santa
1-Mar                                                                 manufacturing environment. We               1
          Metalworking             Associates             Ana, CA
                                                                   have great salespeople who sell our
                                                                     products but are not very... more




                                                                 72
                                                              COMPANY IN IRVINE SEARCHING
                                                               FOR A CNC SET UP PERSON. 1ST
                                                              SHIFT, 8AM - 4:30PM, MONDAY -
29-
       Cnc Programmer       Select Staffing    Irvine, CA        FRIDAY. PLEASE E-MAIL YOUR          1
Feb
                                                                           RESUME TO
                                                               DNI@SELECTSTAFFING.COM OR
                                                                  CALL THE OFFICE AT... more
                                                                 CNC Lathe Machinist Excellent
                                                            opportunity for a skilled CNC Lathe /
28-                                                           Setup / Operator Position is in an
      CNC Lathe Machinist      Pridestaff      Irvine, CA                                                1
Feb                                                          excellent , clean work environment
                                                              and is longterm, fulltime. Irvine...
                                                                              more
                                                                    is currently recruiting for
                                                              experienced CNC Lathe Operators
28-                                                         for an aerospace ... Requirements: -
      CNC Lathe Operator    Express Services   Irvine, CA                                                1
Feb                                                         Previous machine shop experience -
                                                            Experience with CNC Lathe and / or
                                                                           Dave... more
                                                              f Anaheim*******************
                                                            Production/General Labor- willing to
28-                                            Anaheim,     work any shift - some english is fine
         General Labor      Select Staffing
Feb                                               CA        Also Machine operators, Shear, Cnc
                                                              and Assemblers. pay is $8.00 to...
                                                                              more
                                                              CNC Machinist Job Description: A
                                                            large aerospace company is seeking
27-                                            Fontana,         (8) CNC lathe ... MICROMETERS
        CNC Machinist           Aerotek                                                                  1   1
Feb                                              CA         FANUC CONTROLS MILL MACHINIST
                                                                CNC MACHINES About Aerotek
                                                                       Commercial... more



                                                       73
                                                                 of programs using Vericut software
                                                                 CNC programming when required,
      CNC Programmer -
27-                                                                      analyze ... Keywords:
      Mastercam / Metal   Randstad Engineering      Irvine, CA                                           1   1
Feb                                                                       mastercam,metal
        Cutting / CNC
                                                                    cutting,cnc,mastercam, metal
                                                                    cutting, cnc, autocad,... more
                                                                     section of computer numerical
                                                                 control (CNC and NC) machinery and
        Maintenance
25-                                                                 other equipment. ... procedures
       Technician - CNC   Johnson Service Group     Irvine, CA
Feb                                                              including installation of CNC and NC
           and NC
                                                                  Machinery. Calibrate, adjust and...
                                                                                  more
                                                                   have two immediate openings for
                                                                       experienced CNC Machine
24-                                                   Yorba       Operators for the 2nd Shift. Pay ...
        CNC Machinist     Kimco Staffing Services
Feb                                                 Linda, CA        $14.00 per hour. Must haves: -
                                                                  Knowledge of CNC Machines - blue
                                                                          print reading,... more
                                                                  up, operate and adjust controls on
                                                                     CNC lathes in accordance with
          CNC Mazak
24-                                                  Costa            engineering ... in setting up,
      setup/programmer     Benchmark Staffing                                                            1       1
Feb                                                 Mesa, CA      operating and adjusting CNC lathe
           Mazatrol
                                                                 equipment with Mazatrol controls...
                                                                                  more
                                                                  CNC Machine Operator Hours: 2:00
                                                                     PM - 10:30 PM Salary: $13.00 -
24-     CNC Machine                                 Fullerton,
                          Kimco Staffing Services                   $15.00 per hour ... is preferred *
Feb       Operator                                      CA
                                                                  Experience operating a CNC Router
                                                                   is highly desirable * Good... more




                                                            74
                                                                   $14.00 per hour. Must haves: -
                                                                Knowledge of CNC Machines - blue
24-    CNC MACHINE                                   Yorba         print reading, ... not required -
                         Kimco Staffing Services
Feb   OPERATOR (Swiss)                             Linda, CA     Computer literacy - 3-5 years CNC
                                                                Operating Experience. - Knowledge
                                                                           of GMP... more
                                                                 CNC Mill Operator & Set-Up Shift:
                                                                10:00 PM - 8:00 AM Salary: $16.00 -
24-    CNC Set-Up and                              Placentia,
                         Kimco Staffing Services                 $18.00 per hour ... * Must have at                     1
Feb      Operator                                     CA
                                                                 least 5 years of CNC experience *
                                                                  Experience with Fadal is... more
                                                                    DESCRIPTION: CNC Machine
                                                                  Operator- Will be working on a
24-    CNC Machine                                 Anaheim,         Mitsubishi Laser machine. ...
                         Kimco Staffing Services
Feb   Operator (Laser)                                CA         operating a Laser Machine - Must
                                                                   have CNC Machine Operation
                                                                    experience. * AMFAB... more
                                                                    ets, issue programs to set-up
        Mastercam                                                  personnel and assist in set-up.
24-   Programmer For                                             Programs will be created for 3, 4,
                               Thrun Mfg           Chino, CA                                            1   1   1       1
Feb   Aerospace Parts                                            and 5 axis, vertical CNC Mills and
       Manufacturer                                               also horizontal CNC Mills. If you
                                                                            have the... more
                                                                   working with a broad range of
                                                                tolerances CNC Lathe and Mill skills,
24-                                                Ontario,        preferably (Bridgeport Brand)
         Tool Maker      Kimco Staffing Services                                                                    1   1
Feb                                                  CA             Experience working with drill
                                                                presses, a variety of hand tools Well
                                                                          versed in... more




                                                           75
                                                                    various fabrication techniques
                                                                    specifically CNC programming,
       to $100k! Product                                               machining, and tooling. ...
24-
        Marketing - CAD          Appleone          Irvine, CA          employment opportunity            1
Feb
      CAM/Manufacturing                                            employer.CAD CAM, CAD/CAM,
                                                                  CNC, product marketingJob type:
                                                                                Full... more
                                                                in the city of Anaheim is looking for
                                                                 a cnc set up and programer pay is
23-     Cnc Set Up And                             Anaheim,        base on experience and must be
                              Select Staffing                                                            1
Feb       Programer                                   CA        willing to work 2nd shift IF YOU ARE
                                                                     INTERESTED EMAIL ME YOUR
                                                                           RESUME TO... more
                                                                      to: Machine Shop Manager
                                                                 Operates CNC machine equipment
23-    C.N.C Mill & Lathe                          Fountain        (three and five axis ... Five years
                              Metal Crafters                                                                     1   1   1
Feb        Operator                                Valley, CA     minimum general machine-shop,
                                                                    CNC mill and lathe experience
                                                                               Basic... more
                                                                     Certification/Other Skills and
                                                                      Abilities CNC equipment PLC
      Manufacturing Plant                                           controls Machining Production
23-
        Maintenance                 SPX            Brea, CA             tooling/fixture design &
Feb
          Mechanic                                                   manufacture Computer skills
                                                                  (typing, email, Microsoft Word,...
                                                                                   more
                                                                working as a programmer; Technical
                                                                   School Certificate or equivalent
22-                                                Fontana,
       CNC Programmer       Firth Rixson Limited                       highly preferred. Working         1   1
Feb                                                  CA
                                                                      knowledge of MasterCam is
                                                                 required, ideally of versions 9.1 or



                                                           76
                                                                    higher. LANGUAGE... more




                                                                     MACHINIST CNC Sets up and
                                                                   operates conventional, special
21-                                               Baldwin        purpose, and machining centers to
        CNC Machinist
Feb                                               Park, CA          ... training. Knowledge of and
                                                                experience with CNC machining and
                                                                  turning centers required. more
                                                               index head, and various tooling used
                                                                in CNC Lathe operations. Hours are
21-   CNC Lathe Machine     Volt Information                      M-F from 8AM ... experience in
                                                  Irvine, CA                                            1
Feb       Operators             Sciences                            setting up and operating CNC
                                                                      Lathes; understanding 1 - 2
                                                                            controls;... more
                                                                  machine shop equipment ( e. g.
                                                               Lathe, Mill & CNC) to fabricate parts.
                                                   City of
21-                                                              Must be skilled at reading detailed
         MACHINIST        Teledyne Technologies   Industry,                                             1   1
Feb                                                                     Blue Print & Schematics.
                                                     CA
                                                                Experienced at multitasking and be
                                                                             able to... more
                                                                     training 3. Basic CNC control
                                                                   knowledge & CNC applications
21-   FIELD ENGINEERING                           La Habra,          assistance 4. Trade shows ...
                           Benchmark Staffing
Feb       TECHNICIAN                                 CA              Desired:Field service on CNC
                                                                   production machinesPersonal
                                                                           Attributes:... more




                                                          77
                                                                    This position is responsible for
                                                               operating CNC machines to produce
21-    Machininst II - 3rd                          Fontana,         quality, conforming ... create
                             Firth Rixson Limited                                                       1
Feb          shift                                     CA             conforming parts. Able to
                                                               understand CNC programs and make
                                                                 minor adjustments where... more
                                                                    This position is responsible for
                                                               operating CNC machines to produce
21-    Machinist IV (2nd                            Fontana, quality, conforming ... Able to prove
                             Firth Rixson Limited                                                       1
Feb     and 3rd shifts)                                CA            complex CNC programs and
                                                                  edit/moderate programs where
                                                                           necessary... more
                                                                    equipment, multi-axis milling
                                                                      machines, CNC controlled
        Maintenance
21-                                                 Riverside, equipment, boilers chillers, ... *Must
      Mechanic - ReqCode          Goodrich                                                                  1       1
Feb                                                    CA       have a High School Diploma or GED
           22817
                                                                 *CNC repair, troubleshooting and
                                                                           alignment. more
                                                                is for a 2nd Shift Must be proficient
                                                               on CNC Lathe and CNC Mill. Must be
20-      Class A - CNC                               Corona,         able to pass ... CNC machine
                                  Staffmark                                                                     1   1
Feb        Machinist                                   CA      operator Working knowledge of CNC
                                                                  Lathes, Mills and other machine
                                                                              tools... more
                                                                 optical manufacturing equipment,
                                                               including CNC machining and optical
                                                                      metrology.Comprehensive
19-                                                   Santa
      Operations Manager        Mark Optics                    knowledge of ISO 9001-2008 Quality
Feb                                                  Ana, CA
                                                                       System and continuous
                                                                  improvement system.10 years...
                                                                                 more



                                                            78
                                                             for a dynamic company in the local
                                                                    area as a CNC Operator. -
      Permanent Position
18-                                               Sun City,      Experience: 2-3yrs+ (with an
       for CNC Machine          Appleone
Feb                                                  CA     Engineering company is a plus) -Pay
           Operator
                                                             range: $14-$17 DOE -Must be able
                                                                  to pass background... more
                                                               Table Saw, CNC Router Operator
                                                             Experience in operating table saw,
17-                        Www.mattsonresources. Anaheim,       sliding table saw Experience in
        CNC Machinist
Feb                                com               CA       operating point-to-point, drill and
                                                            dowel inserter, pocket screws Ability
                                                                           to lift... more
                                                            Expertise in casting, CNC machining,
                                                             small fabrications and weldments.
17-     Manufacturing                            Irwindale, Background needs to be mechanical
                              Caltek Staffing
Feb       Engineer                                   CA      manufacturing. Other related titles
                                                                   might be tooling engineer,
                                                                       mechanical... more
                                                            of programs using Vericut software -
                                                                  gt; CNC programming when
16-                                                           required, analyze ... - gt; In-depth
       CNC Programmer       Randstd Engineering  Irvine, CA                                          1   1   1
Feb                                                              knowledge of 4 or 5 axis CNC
                                                               machining center programming
                                                                       (Lathe and... more
                                                             be able to run computer numerical
                                                              controlled CNC Machines such as,
16-    Conventional        Www.mattsonresources.   Garden but not limited to ; milling machines,
                                                                                                             1   1
Feb   Machine Operator             com           Grove, CA         lathes, turning centers and
                                                               horizontal mills. Must be able to
                                                                          follow... more




                                                            79
                                                        CNC mill machines in-house, utilizing
                                                            the CNC program, tooling, and
        CNC Set-up &                           City of
15-                                                            gauging assigned to ... level
       Operator - Night        Acromil        Industry,                                            1       1
Feb                                                        machining classes and/or formal
            Shift                                CA
                                                        CNC training. Requires 10 + years of
                                                                        CNC... more
                                                           Resume must be submitted with
                                                             reference on experience with
14-                                                      Drafting & CNC Programming/Setu
       CNC Programmer          Midcom        Irvine, CA                                            1
Feb                                                       ... of drawings, programming and
                                                               setup of CNC machines for
                                                            production and R&D jobs. more
                                                         removing machines (manual, NC &
                                                          CNC), i.e. CNC lathe, engine lathe,
14-   CNC Machinist - 2nd                    Riverside,
                            Resource Mfg                   mill, drills, ... position requires 5       1   1
Feb         Shift                                CA
                                                        years of experience in CNC machines
                                                         with threading experience,... more
                                                             ases of machinery and facility
                                                          maintenance. competitive wages,
                                                 San
14-      Maitenance                                     benefits & 401k. Please send resume
                            Haley Brothers   Bernardin
Feb       Mechanic                                         to (800) 894 9956 FABRICATION,
                                                o, CA
                                                                 ELECTRICAL, PLC, CNC,
                                                        MECHANICAL, HYDRAULICS,... more
                                                               plant manager, operations,
                                                              technician, CNC, purchasing,
                                               City of
14-                                                      engineering, production supervisor,
      ON SITE MANAGER                         Industry,
Feb                                                       mechanical, production manager,
                                                 CA
                                                          plant manager, assembly, general,
                                                                welder, logistics,... more




                                                     80
                                                       has immediate opening for a skilled
                                                       CNC Programmer/Operator.This is a
13-                                           Garden           Lead man position wi ...
          MACHINEST           Adecco                                                           1
Feb                                          Grove, CA NTMA/NIMS) Some college a plus.10
                                                          years as Manual/CNC machinist
                                                                    desired... more
                                                           but it also boasts of having an
                                                       equally fine CNC machine shop with
13-      MACHINE SHOP                          Santa       the very latest equipment and
                             Deltronic
Feb       SUPERVISOR                          Ana, CA          capability. In addition to
                                                         manufacturing the Deltronic Plug
                                                                Gages, we also... more
                                                              of lathes; and will need to
                                                                specialized in CNC type
                                              City of         programming and setup of
10-      Manufacturing
                           LISI Aerospace    Industry,   machines* ... with demonstrated       1   1
Feb       Supervisor
                                                CA          ability and experience of CNC
                                                        Programming of lathes machines. -
                                                                     Must... more
                                                             candidates with 3 to 5 years
                                                             expeience with CNC will be
           MACHINE                             Aliso     considered. This machinist will ...
9-Feb                         Adecco                                                               1   1
           OPERATOR                          Viejo, CA       and run vertical CNC milling
                                                        machines and CNC lathes.Prefer 5+
                                                                 yrs experience. more
                                                             plant manager, operations,
                                                            technician, CNC, purchasing,
                                             Pomona, engineering, production supervisor,
9-Feb   Machine Operator   Select Staffing
                                                CA      mechanical, production manager,
                                                        plant manager, assembly, general,
                                                               welder, logistics,... more



                                                     81
                                                           skills based on planned assignment
                                                           (CNC mill/ lathe, manual mill/lathe
            Machinist B                       Corona,
9-Feb                             Circor                     or other ... for assigned position.   1   1   1
        (Grinder) 2nd Shift                     CA
                                                             Ability to load CNC programs for
                                                             assigned work orders (if... more
                                                                   CNC/NC MACHINING
                                                           SETUP/OPERATOR Santa Ana, Ca ...
        CNC/NC MACHINING                       Santa        Shift 3:30pm - Midnight Required
8-Feb                         Mfgpeople.com
         SETUP/OPERATOR                       Ana, CA               Experience: CNC/CN
                                                                Setup/Operator: Setup and
                                                                      operate... more
                                                             CNC Set-Up/Operator Nationally
                                                          recognized mold shop in Orange, CA
            CNC Set-                          Orange,
8-Feb                           Allen Mold                 ... has an immediate opening for a              1
           Up/Operator                          CA
                                                                mid/level' CNC Vertical Mill
                                                                      Operator... more
                                                             CNC Mill/Lathe Operator - 10 to
                                                          18/hr CNC Programmer - 20 to 25/hr
        CNC Machinist and                     Ontario,            CNC Set-up - 15 to 22/hr
8-Feb                                                                                              1   1   1
         Quality Control                        CA           Conventional Machinists - 15 to
                                                            22/hr QC - 1st Article Inspectors 1
                                                                        CMM... more
                                                                candidates with 3 to 5 years
                                                                expeience with CNC will be
                                              Orange,       considered. This machinist will ...
8-Feb   Machine Operator          Irvine                                                               1   1
                                                CA              and run vertical CNC milling
                                                          machines and CNC lathes. Prefer 5+
                                                                   yrs experience. more




                                                     82
                                                               implementation of a comprehensive
                                                                    and robust manufacturing and
          Manufacturing                                            verification plan._ CQE (Certified
8-Feb                           Confidental       Irvine, CA
            Engineer                                                   Quality Engineer a plus) _
                                                                  Experience in metals, aerospace,
                                                                    and or CNC equipment... more
                                                               experience with computerized panel
                                                                  saws, 22 CNC spindles, 6 vacuum
          CNC Machine                             Anaheim,
7-Feb                             Staffchex                     CNC tables, 2 laser ... ( Long Periods
            Operator                                 CA
                                                               of Time )7. One year certificate from
                                                                 college or technical school... more
                                                                 up, operate and adjust controls on
                                                                    CNC lathes in accordance with
            CNC HAAS                               Costa
7-Feb                        Benchmark Staffing                   engineering ... and adjusting CNC      1   1
        setup/programmer                          Mesa, CA
                                                                   lathe equipment with CNC's in a
                                                                           production... more
                                                                        1. Must be familiar with
                                                                Fanuc/Mazatrol Control Systems. 2.
               CNC           Headway Workforce    Fullerton,          Must be able to set-up and
7-Feb
        Machinist/Operator       Solutions            CA         complete one off jobs to exacting
                                                                       tolerances without direct
                                                                  supervision. 3. Must have... more
                                                                        Provide Manual and/or
                                                                      CNC/Machine Technology
           Instructor,                                           instruction in a classroom and live
                              Coast Community      Costa
7-Feb     Manufacturing                                           job/lab environment. 2. Maintain
                               College District   Mesa, CA
           Technology                                            professional and ethical academic
                                                                   standards associated with the...
                                                                                  more




                                                          83
                                                                          Skills: Specific: CNC Machining
                                                                         experience, CNC Machine skills,
          CNC / Machinst                                                   Conventional machine a plus.
6-Feb                                Staffmark           Perris, CA
            Team Lead                                                   Administrative: Ability to read and
                                                                         understand written instructions,
                                                                               specifications,... more
                                                                          position will be responsible for
                                                                       Programming CNC Machines using
                                                         Fullerton,      AlphaCam as well as job costing.
6-Feb    CNC Programmer        Kimco Staffing Services                                                        1
                                                             CA       EXPERIENCE: * Must have at least 10
                                                                      years of programming experience &
                                                                                  Job Costing. more
                                                                       elping to maintain established lean
                                                                        culture. Preferred Education: High
            Machinist                                                           School or equivalent,
6-Feb                                Staffmark           Perris, CA
          Conventional III                                               Vocational/Specialized training a
                                                                            plus. Ability to operate CNC
                                                                           machines a plus, but... more
                                                                         including computer numerically
                                                                        controlled (CNC) tools to perform
                                                         Pomona,          precision Fit and ... equivalent
4-Feb   General Machinist II        Casa Herrera
                                                           CA         required Ability to operate both CNC
                                                                         and Conventional Machines One
                                                                                    year of... more
                                                                       quivalent experience. * AutoCAD or
                                                                      SolidWorks * Working knowledge of
                                                          City of
                                                                            Microsoft Office Programs.
4-Feb        Engineer I                Alcoa             Industry,                                            1
                                                                          Preferred Qualifications * MRP
                                                            CA
                                                                             experience, * Equipment
                                                                          procurement * CNC or... more




                                                                 84
                                                                         is actively looking for an
                                                                 experienced CNC Machine Operator
           CNC Machine                            Anaheim,         for a 2nd shift ... Experience of at
3-Feb                        Providian Staffing                                                               1
             Operator                                CA             least 3 to 5 years with CNC and
                                                                 Lathe.The ideal candidate will: Be...
                                                                                    more
                                                                   Machinist - CNC Summit Machine
                                                                        Inc. a market leader in the
         Machinist - CNC
                                                  Ontario,        machining of complex components
3-Feb     Lathe & Mill                                                                                        1   1
                                                    CA            for the aerospace, petroleum, and
           Machinists
                                                                 energy industries is seeking Lathe &
                                                                          Mill Machinists... more
                                                                    experience troubleshooting and
                                                                      repairing CNC manufacturing
        Electromechanical     Ashley Furniture    Colton,          equipment, PLCs, motor controls,
3-Feb
            Technician           Industries         CA           and mechanical assemblies. Benefits
                                                                     Ashley offers a comprehensive
                                                                       benefits package to... more
                                                                    and reduce costs; recommends
                                                                 improvement in CNC programming,
         Manufacturing                             Santa         methods, processes, and materials;
2-Feb                          Caltek Staffing                                                            1
        Engineer Manager                          Ana, CA                ensures compliance with
                                                                 engineering drawings, specifications
                                                                         and change orders. more
                                                                     Vertical Mill, Welders, Manual
                                                                       Lathes, CNC, Lathes, Milling
        Machinist/Maintena                        Corona,         Machine. Experience with mig, tig,
2-Feb                        Mission Rubber Co                                                                1   1
          nce Mechanic                              CA            and arc welding a plus. Pay 18 plus
                                                                     depending on experience.. No
                                                                       phone calls. Submit... more




                                                            85
                                                                   Knowledge and experience ofmetal
                                                                      forming, CNC machining, and
                                                                      Geometric, Dimensioning and
            Sr. Principal
31-Jan                            Apr Consulting       Irvine, CA     Tolerancing (GD&T) Be able to
             Engineer
                                                                    interpret customer requirements
                                                                     such as Scope of Work (SOW)...
                                                                                   more
                                                                   will perform setups on a variety of
                                                                       Mazak CNC lathes. Our shop
           CNC Set Up                                     Santa         averages about four ... AND
26-Jan                         Abbott Staffing Group                                                      1
         Operator - Mazak                               Ana, CA     RESPONSIBILITIES Plan and set up
                                                                    CNC lathes, including live tool and
                                                                              fourth... more
                                                                       CNC Operator Tracking Code
                                                                  173552-950 Job Description Operate
                                                         Garden    CNC machines Job Location Garden
26-Jan     CNC Operator         Precision Castparts
                                                       Grove, CA    Grove, CA, US. Position Type Full-
                                                                  Time/Regular - Submit/Create a new
                                                                          resume/CV for... more
                                                                    extrusion process, metal forming,
                                                                  CNC machining, GD&T, metallurgical
                                                                     processes Must be proficient in
26-Jan Sr.Principal Engineer    Precision Castparts    Irvine, CA
                                                                  strength analysis using NASTRAN or
                                                                       PATRAN, computational fluid
                                                                          dynamic (CFD)... more
                                                                     minimal supervision sets up and
                                                                    operates CNC horizontal lathe to
                                                         Garden      perform machining ... Required
26-Jan         Traubs           Precision Castparts                                                       1
                                                       Grove, CA     Experience EDUCATION and/or
                                                                    EXPERIENCE: * Certificate from a
                                                                        technical school; or... more



                                                               86
                                                                   include: milling, lathe, hone, plating,
                                                                        CNC programming, assembly,
           Sr.Operations                               Corona,        testing, non-destructive testing,
26-Jan                         Circor, International                                                         1   1   1
           Manager/ VSL                                  CA          dimensional and visual inspection
                                                                          techniques, and electro-
                                                                             mechanical... more
                                                                       direction of the Machine Shop
                                                                       Manager the CNC Lathe Set Up
                                                                     person will perform setups ... EOE
                               Superior Technical       Santa
25-Jan   CNC Lathe Set-Up                                                 M/F/D/V Required Skills /              1
                                  Resources            Ana, CA
                                                                      Qualifications: Minimum 2 years
                                                                       experience as a CNC Lathe Se...
                                                                                     more
                                                                   CNC Programmer Operator CNC Set-
                                                                      Up Operator to join Engineering
            CNC Set-Up                                  Santa        Company in Anaheim. We ... who
24-Jan                            Cybercoders                                                                1   1
             Operator                                  Ana, CA     can Program, Set Up and Run mainly
                                                                     CNC lathes. If you have CNC Swiss
                                                                              experience... more
                                                                          technological and design
                                                                    opportunities in CNC technologies,
            Instructor,                                              rapid prototyping, laser scanning,
                                                        Costa
21-Jan Architecture Studio -    Jobelephant.com                            laser cutting, prototype
                                                       Mesa, CA
        Digital Fabrication                                                development and mass
                                                                     customization. 3. The successful...
                                                                                     more
                                                                           Provide Manual and/or
            Instructor,                                                  CNC/Machine Technology
                                                        Costa
21-Jan     Manufacturing        Jobelephant.com                     instruction in a classroom and live
                                                       Mesa, CA
            Technology                                               job/lab environment. 2. Maintain
                                                                     professional and ethical academic



                                                              87
                                                                   standards associated with the...
                                                                                more


                                                                    MAIN FUNCTION: Sets up and
                                                                     operates C.N.C machines to
                                                       City of
         CNC Lathe Operator                                      manufacturer parts per blueprints.
19-Jan                             Reuland           Industry,                                         1
           (Live tooling)                                        DUTIES & RESPONSIBILITIES: 1. Set
                                                         CA
                                                                    up, first article inspection and
                                                                   operates C.N.C Lathe to... more
                                                                          & troubleshooting *
                                                                 Troubleshooting CNC equipment *
       Electrical/Mechanica                                     Knoweldge of single and 3 phase AC
                               Ashley Furniture       Colton,
17-Jan    l Maintenance                                               & DC voltages, hydraulics,
                                  Industries             CA
            Technician                                            pneumatics, and motor controls *
                                                                Read and understand schematics *...
                                                                                  more
                                                                    Conceives, designs, plans, and
                                                                     implements CNC lathe tool
           Manufacturing                              Foothill    fabrication improvements that ...
16-Jan                        Bal Seal Engineering                                                     1
            Engineer II                              Ranch, CA metrics. Demonstrated expertise in
                                                                  CNC machine operation including
                                                                             setup,... more
                                                                 limited to; Bead Blast and Tumbler
                                                                  Debur, CNC, EDM, Laser Engraver,
          Production Team
                                                     Fountain      OD Grinder, Coating Machine. *
16-Jan    Member II-Punch           Surefire
                                                     Valley, CA   Starts and stops the machine, and
           Press Operator
                                                                  watches for imperfect operation.
                                                                           Runs more... more




                                                             88
                                                                     in 3D coordinate measurement
                                                                  technology and CNC measurement
            Applications                                             in industrial setting is required.
16-Jan                          Sky Advertising      Irvine, CA
             Engineer                                              Experience in the plastic injection
                                                                    molding industry is a plus. Also,
                                                                          candidate must... more
                                                                      * A strong background in CNC
                                                                      machining processes (Drilling,
            Estimator -
                                                        San           Tapping, CNC Milling/Turning,
12-Jan     Machining and      Jsa Interim Staffing                                                                    1
                                                     Dimas, CA    Outside Processes). * Knowledge of
            Fabrication
                                                                     computers (Excel and Word). *
                                                                     Capable of determining... more
                                                                        CNC Mill Machinist Posted
                                                                  on:01/09/12 Job Number: 300138-
                               Volt Information      Fullerton,   9142-7-292836 Add to Cart Email t
11-Jan   CNC Mill Machinist                                                                                           1
                                   Sciences              CA        ... Employer Requirements: Years
                                                                  experience as a CNC Mill Machinist,
                                                                      ability to pass certified... more
                                                                    Machine Shop Supervisor - CNC
                                                                       Machine/Mastercam Posted
           Machine Shop                                           on:01/04/12 Job Number: 300274-
                               Volt Information       Garden
5-Jan     Supervisor - CNC                                        8256 ... CNC machine to run parts. -        1
                                   Sciences          Grove, CA
         Machine/Mastercam                                          Load and operate CNC machine,
                                                                    inspecting own work between...
                                                                                    more
                                                                      5-axis software. Able to create
                                                                    multi-axis CNC programs, create
              Senior
                              Encore Composite                         setup sheets, support ... and
5-Jan      Manufacturing                             Brea, CA                                             1       1
                                 Structures                        sustaining issues, and release CNC
             Engineer
                                                                   programs to production Project...
                                                                                    more



                                                             89
                                                            will be responsible for supervising
                                                          10 CNC Conventional Machinists and
          Machine Shop      Volt Information     Garden     program parts ... CNC machine to
4-Jan                                                                                               1
           Supervisor           Sciences       Grove, CA    run parts. - Load and operate CNC
                                                              machine, inspecting own work
                                                                      between... more
                                                           using laser cutting, thermoforming,
                                                          and CNC equipment Test prototypes
              Senior
                                               Irwindale, with biological assays and critically
4-Jan   Mechanical/Automa     Genefluidics
                                                   CA        evaluate materials, design, and
          tion Engineer
                                                              assembly Prepare automation
                                                                      products... more




                                                                                                  CNC Programming

                                                                                                                    Mastercam
                                                                                                                                Multiaxis


                                                                                                                                            Lathe


                                                                                                                                                    Mill
                                                                                                  40                 8          10          43      35




                                                       90
                                                                      Appendix E
                                           Jobs in requiring skills in programmable logic control systems

                      According to http://entry-level-pr-jobs.jobamatic.com/a/jobs/find-jobs/q-plcs/l-norco%2C+CA
There are at least 100 computer numerical control positions within a 25 mile radius of Norco. The dates of these jobs are from January to
                                                                the present




                                                                                                                                                    VFD systems
                                                                                                                                           Safety
                                                                                                                                     HMI
                                                                                              controls. Troubleshoot ladder logic
                                                                                              and PLC communications problems.
                                                                                                  Supervise and direct contract
 3-Jan       Project Engineer (Controls)            B Braun Medical            Irvine, CA
                                                                                               personnel and outside vendors in
                                                                                                 the performance of contracted
                                                                                                      services. Help... more
                                                                                               * Basic knowledge of refrigeration
                                                                                                  and PLC/plant automation is
                                                                                Baldwin       required * Ability to move freely in
 5-Jan         Maintenance Mechanic                 In-N-Out Burger
                                                                                Park, CA       and around obstacles common in
                                                                                              the meat production room * Ability
                                                                                                         to lift a... more
                                                                                                      Configuration Control
                                                                                                Implementation DCS PLC Control
                                                                              Lake Forest,     Networks Areas of process control
 5-Jan     Principal Nuclear IVV Engineer                Invensys
                                                                                  CA              expertise should include the
                                                                                                 following: * Reactor Protection
                                                                                              Systems (RPS) * Engineered... more




                                                                        91
                                                                              senior level assistance at all levels
                                                                              of a safety and non-safety related
                                                              Lake Forest,       control ... Reactor Protection
5-Jan      Sr Nuclear IVV Engineer          Invensys                                                                      1
                                                                  CA           Systems (RPS) Engineered safety
                                                                                 feature systems Information
                                                                                        Systems... more
                                                                               Prior experience maintaining lift
                                                                                trucks. PLC experience a plus.
                                                                                BENEFITS Complete ... DOWN
6-Jan      Crown Forklift Mechanic            Uline           Ontario, CA
                                                                               FORKLIFT, FORKLIFT MECHANIC,
                                                                                  FORKLIFT REPAIR, FORKLIFT
                                                                              MAINTENANCE, PLC, LIFT... more
                                                                             in a manufacturing environment is
                                                                             required. PLC controls engineering
                                                               Irwindale,      experience is preferred. Process
6-Jan    SR. PROJECT ENGINEER - CPG        Millercoors
                                                                   CA         design and utilities experience as
                                                                              well as an understanding of NFPA
                                                                                        70E and... more
                                                                             reading schematics & bldg panels.
                                                                              Basic PLC knowledge. MUST have
                                       Container Container    Santa Ana,        own tools, rollawy;speak Eng,
8-Jan    MAINTENANCE ELECTRICIAN
                                           Supply Co             CA             provide DMV printout, current
                                                                                drivers lic & ins. Bnft pkg avail.
                                                                                      Applications... more
                                                                             controls systems electrical design,
                                                                                and PLC/HMI software design;
          Controls Project Engineer                                          experience in all aspects of project
13-Jan                                Automationtechies, AC    Irvine, CA                                             1
                   (3073)                                                       engineering, including: project
                                                                             schedule development, generation
                                                                                            of... more




                                                         92
                                                                                  material usage. Understand and
                                                                                follow plant safety rules including
                                                                  Anaheim,        safe lifting practices ... This will
14-Jan     Maintenance Mechanic             Berry Plastics                                                               1   1
                                                                     CA           include proprietary equipment
                                                                                containing PLC, HMI, SCADA, LAN
                                                                                    Equipment and/or o... more
                                                                                  Working knowledge of Robot /
                                                                                  Vision / PLC programming Solid
                                                                   Foothill       troubleshooting skills Ability to
16-Jan      Automation Technician        Bal Seal Engineering
                                                                  Ranch, CA     read and interpret blueprints and
                                                                                 tool designs Excellent verbal and
                                                                                            written... more
                                                                                  Knowledge of Allen Bradley and
                                                                               other PLC experience preferred. ...
         Machine Repair Technician III                            Santa Ana,
16-Jan                                    Jbt Technologies                       in the following: Industrial motor
            Stationary Engineer                                      CA
                                                                                 Controls, PLC System equipment
                                                                                  maintenance experience. more
                                                                                    ipment validation (including
                                                                                      software validation) and
                                                                               application packages such as Excel,
16-Jan    Manufacturing Engineer II            Bio-Rad            Irvine, CA
                                                                               Word, and CAD systems is required.
                                                                               Experience with PLC programming
                                                                                      and exposure to... more
                                                                                     systems, such as Rockwell
                                                                                    programming and PLC logic.
                                                                  Fullerton,   Preferred Qualifications 1) Specific,
17-Jan     Electrical Engineer III IV      Kimberly Clark
                                                                      CA        in depth technical knowledge and
                                                                                  expertise in tissue and or towel
                                                                                   manufacturing. 2) Up... more




                                                             93
                                                                                may be contacted. Principals Only.
                                                                                         * PLC programming &
                                                                                troubleshooting * Troubleshooting
           Electrical/Mechanical         Ashley Furniture
17-Jan                                                           Colton, CA       CNC equipment * Knoweldge of
          Maintenance Technician            Industries
                                                                                     single and 3 phase AC & DC
                                                                                voltages, hydraulics, pneumatics,...
                                                                                                   more
                                                                                     * Understand, maintain and
                                                                                  troubleshoot material handling
                                                                                control systems, including PLC/P ...
19-Jan   Associate Systems Engineer           Target              Rialto, CA    Requirements * Bachelor's degree
                                                                                      in Electrical Engineering or
                                                                                  equivalent degree * PLC/PC p...
                                                                                                   more
                                                                                Maintenance Manager needed for
                                                                                  plastic manufacturing company.
                                                                                 Will prepare and maintain various
                                                                  Riverside,
19-Jan     Maintenance Manager        Kimco Staffing Services                           forms of facility project
                                                                     CA
                                                                                       documentation in plastics
                                                                                   thermoforming facility. Must...
                                                                                                   more
                                                                                controls systems electrical design,
                                                                                   and PLC/HMI software design;
              Controls Project                                                  ability to analyze, ... To learn more
22-Jan                                   B. Braun Medical         Irvine, CA                                            1   1
         Engineer/Specialist / 2667                                                 about B. Braun and our safety
                                                                                    healthcare products or view a
                                                                                             listing... more
                                                                                BroadLux Inc sells and services fuel
          Technical Support - Field                              Lake Forest,     management systems to public
22-Jan                                       Broadlux
                Technician                                           CA          agencies utilities and niche retail
                                                                                  fuel suppliers We are currently


                                                            94
                                                                                reviewing candidates for a
                                                                                Technical Services... more


                                                                            rong PC skills (Windows OS, Word,
                                                                              Excel,) PC networking (Ethernet)
                                                                             PLEASE DO NOT APPLY IF YOU DO
            Industrial Electronics                             Riverside,
23-Jan                                    Carpenter Co                       NOT HAVE PROGRAMABLE LOGIC
                 Technician                                       CA
                                                                                     CONTROLLERS (PLC)
                                                                            EXPERIENCENO PHONE CALLS OR...
                                                                                            more
                                                                            with the design and programming
                                                                              of PLC systems Experience with
                                                                                design and configuration of
23-Jan    Lead Engineer- CA (2996)    Automationtechies, KF    Irvine, CA                                         1
                                                                              HMI/SCADA systems Experience
                                                                             with project FAT, commissioning,
                                                                              and SAT Experience with... more
                                                                              amplifiers, Programmable Logic
                                                                              Controllers (PLC's), DC Brushless
                                                                             Motors/Controllers and National
23-Jan   Sr Test Equipment Engineer      Butler America        Tustin, CA             Instruments data
                                                                             control/acquisition hardware and
                                                                             software. Must be able to read...
                                                                                            more
                                                                              amplifiers, Programmable Logic
                                                                              Controllers (PLC's), DC Brushless
                                                                             Motors/Controllers and National
23-Jan    Test Equipment Engineer        Your Company          Tustin, CA             Instruments data
                                                                             control/acquisition hardware and
                                                                             software. Must be able to read...
                                                                                            more


                                                          95
                                                                                 with the design and programming
                                                                                   of PLC systems Experience with
                                                                                      design and configuration of
24-Jan          Lead Engineer            Automationtechies         Irvine, CA                                            1
                                                                                   HMI/SCADA systems Experience
                                                                                with integration using tools such as
                                                                                        VB, MS SQL, and... more
                                                                                 Kelly Engineering is in search for a
                                                                                   Mechanical Designer capable of
                                                                   Santa Ana,       concept, design and directing
24-Jan       Mechanical Designer           Kelly Services
                                                                      CA            manufacture of machinery and
                                                                                conveyors including layout work for
                                                                                           our growing... more
                                                                                   amplifiers, Programmable Logic
                                                                                   Controllers (PLC's), DC Brushless
                                                                                  Motors/Controllers and National
                                         Superior Technical
24-Jan   Sr Test Equipment Engineer 2                              Tustin, CA               Instruments data
                                            Resources
                                                                                  control/acquisition hardware and
                                                                                  software. Must be able to read...
                                                                                                  more
                                                                                   control systems and processes.
                                                                                High level PLC and HMI training and
                                                                                  skills required - Rockwell AB skills
24-Jan   System Field Service Engineer                             Irvine, CA                                            1
                                                                                     preferred.SCADA experience
                                                                                   beneficial.Strong knowledge of
                                                                                         process control... more
                                                                                  This is a technical job description
                                                                                 for recruitment purposes only. Job
         SAP Business Systems Manager                              Santa Ana,        Title - SAP Business Systems
25-Jan                                        Masco
                     (SAP)                                            CA        Manager, Supply Chain JOB SCOPE/
                                                                                    SUMMARY: * Act as a primary
                                                                                        liaison between... more



                                                              96
                                                                                 or equivalent * Skills in conveyors,
                                                                                     PLC, Crown Forklifts, welding,
                                                                      San
             2nd Shift Industrial                                                milling machines, hand and power
26-Jan                                    Dollar Tree             Bernardino,
             Maintenance Tech                                                    tools, and electrical motors * P.C.
                                                                      CA
                                                                                    literate * Previous warehouse
                                                                                          experience... more
                                                                                    and written instructions while
                                                                                   adhering to safety guidelines to
                                                                      San
             2nd Shift Industrial                                                      ensure equipment is ... or
26-Jan                                    Dollar Tree             Bernardino,                                           1
             Maintenance Tech                                                      equivalent * Skills in conveyors,
                                                                      CA
                                                                                     PLC, Crown Forklifts, welding,
                                                                                             milling... more
                                                                                software upgrades. These upgrades
                                                                                  include PLC controls, AC Variable
                                                                                   Frequency Drives, ... is required.
26-Jan       Electrical Engineer           Rightthing             Ontario, CA
                                                                                Desired computer skills include PLC
                                                                                   programming, Microsoft Office,
                                                                                              CAD... more
                                                                                specifications Understands and can
                                                                                 program PLC systems, read ladder
                                                                  Santa Ana,        diagrams, factory manuals and
26-Jan           Electrician           Precision Castparts
                                                                     CA           schematics Ensures any wiring of
                                                                                      new and rebuilt equipment
                                                                                    complies with National... more
                                                                                   amplifiers, Programmable Logic
                                                                                   Controllers (PLC's), DC Brushless
                                                                                  Motors/Controllers and National
         Sr. Test Equipment Engineer
26-Jan                                   Apr Consulting           Tustin, CA               Instruments data
                    (9631)
                                                                                 control/acquisition hardware and
                                                                                  software. Must be able to read...
                                                                                                  more



                                                             97
                                                                                 or equivalent Skills in conveyors,
                                                                                    PLC, Crown Forklifts, welding,
                                                                      San
             2nd Shift Industrial                                               milling machines, hand and power
27-Jan                                  Dollar Tree Stores        Bernardino,
             Maintenance Tech                                                     tools, and electrical motors P.C.
                                                                      CA
                                                                                     literate Previous warehouse
                                                                                           experience... more
                                                                                   and written instructions while
                                                                                  adhering to safety guidelines to
                                                                      San
             2nd Shift Industrial                                                      ensure equipment is ... or
27-Jan                                  Dollar Tree Stores        Bernardino,                                              1
             Maintenance Tech                                                   equivalent Skills in conveyors, PLC,
                                                                      CA
                                                                                Crown Forklifts, welding, milling...
                                                                                                  more
                                                                                material handling control systems,
                                                                                    including PLC/PC controllers,
                                                                                       industrial networks and ...
         Associate Systems Engineer -
27-Jan                                     Target.com              Rialto, CA    Requirements - Bachelor's degree
                Rialto, CA Job
                                                                                      in Electrical Engineering or
                                                                                   equivalent degree - PLC/PC p...
                                                                                                  more
                                                                                    : Design and programming of
                                                                                   PLC/DCS systems : Design and
                                                                                    configuration of HMI/SCADA
27-Jan         Project Engineer         Automationtechies          Irvine, CA          systems : Networking and        1
                                                                                communications : Advanced use of
                                                                                    Microsoft Operating Systems
                                                                                            including... more
                                                                                Requirements: Minimum of3 years
                                                                                    proven Experience with Allen
            Electric Maintenance                                   Fullerton,
30-Jan                                   Prime Personnel                         Bradley PLC Hardware/Software,
                 Technician                                            CA
                                                                                Variable speed drivers, hydraulics,
                                                                                  pneumatics,mechanics and the


                                                             98
                                                                                      ability to demonstrate... more




                                                                                            production equipment
                                                                                      *Program/troubleshoot PLC/SLC
                                                                                    and operator interface panels and
30-Jan    Line Maintenance Mechanic          Nestle Waters Na        Ontario, CA
                                                                                   ... knowledge of Production related
                                                                                    equipment *PLC troubleshooting,
                                                                                      Welding and fabricating... more
                                                                                   Sensors (fiber optic, proxy, etc), PLC
                                                                                      Input & Output, and automated
                                                                                        assembly ... thermal printers,
30-Jan         Mechanic Needed              Amtec Human Capital      Azusa, CA
                                                                                     ultrasonic welding, laser welding,
                                                                                       PLC programming, and vision...
                                                                                                      more
                                                                                     * Must have strong knowledge in
                                                                                             the maintenance and
                                                                                     troubleshooting of: Ac/DC drives,
         Elec/Inst Diagnostic Electrician   Freeport McMoRan
1-Feb                                                                Chino, CA           PLC' ... or GED preferred. *       1   1
           - Concentrator - Chino,NM          Copper & Gold
                                                                                    Experience with VFDs. * PLC, HMI,
                                                                                          SCADA Control Systems. *
                                                                                              Experience... more
                                                                                       include: Design custom control
                                                                                      panels with PLC controls, motor
          Electrical Engineer, Power &                                La Verne,      controls, and VFD's from 5 to 500
1-Feb                                       Vacom Technologies                                                                  1
                      Control                                            CA         HP including layout, circuit design
                                                                                        and engineering calculations
                                                                                           Develop circuit... more




                                                                99
                                                                                   . Excellent interpersonal and
                                                                                  communication skills required.
                                                                  Fullerton,   Proven experience in coaching and
2-Feb     Maintenance Supervisor           Kraft Foods
                                                                      CA        developing teams. Knowledge of
                                                                                 electrical and PLC programming
                                                                                    highly desirable. Job... more
                                                                               The Electromechanical Technician is
                                                                                 responsible for troubleshooting,
                                         Ashley Furniture                        testing, and repairing electronic
3-Feb   Electromechanical Technician                              Colton, CA
                                            Industries                                 production equipment.
                                                                                     Requirements Must have a
                                                                                  Technical or Associate... more
                                                                                   hecklists Coordinates change
                                                                                 control and keeps the validation
                                                                                tracking system updated Assist in
3-Feb       Validation Engineer              Hospira              Irvine, CA
                                                                                writing and executing laboratory
                                                                                           instrument and
                                                                                 computer/software, PLC... more
                                                                                  Motor Control Centers (MCCs),
                                                                                      Sensors, Safety Products,
                                                                                   Distributed Control Systems,
                                                                  Anaheim,
4-Feb       Technical Consultant       Rockwell Automation                          Industrial Networks, SCADA,      1
                                                                     CA
                                                                                   Historical Analysis, Vibration
                                                                                Monitoring, Energy Management,
                                                                                             Axis... more
                                                                                 Maintenace Mechanic 3rd Shift.
                                                                                   Troubleshoot PLC, hydraulics,
         AEROSPACE MAINTENACE                                     Santa Ana,         mechanical and electrical.
5-Feb
               MECHANIC                                              CA         Minimum 7 yeas experience. Call
                                                                                       714347 1152 or email:
                                                                                            lmb@fnst.com



                                                            100
                                                                                    Construction/Facilities... more




                                                                                 controls systems electrical design,
                                                                                   and PLC/HMI software design;
              Controls Project                                                   ability to analyze, investigate and
6-Feb                                      Bbraun Medical            Irvine, CA                                          1
             Engineer/Specialist                                                  propose approaches to technical
                                                                                  challenges relating to equipment
                                                                                         automation... more
                                                                                scheduled preventive maintenance,
                                                                                   monthly safety checks, making
        Maintenance Mechanic - 2nd                                     City of  repairs and ... - Practice good safety
6-Feb                                       Kelly Services                                                                   1
                  shift                                            Industry, CA    working practices such as: Lock
                                                                                      out/Tag out, maintain an
                                                                                          organized... more
                                                                                   and compressed air systems is
                                                                                necessary * PLC Experience a plus *
                                                                                    * * Knowledge of ... accurate
6-Feb    Maintenance Techincian II             Staples              Ontario, CA                                              1
                                                                                records * Must be passionate about
                                                                                      safety Basic * High school
                                                                                         education or... more
                                                                                 * Must have strong knowledge in
                                                                                        the maintenance and
        Diagnostic Electrician - Mill -   Freeport McMoRan                       troubleshooting of: Ac/DC drives,
7-Feb                                                                Chino, CA
                Chino, NM                   Copper & Gold                              PLC's, overhead cranes,
                                                                                   management control systems,
                                                                                     calibration of field... more




                                                             101
                                                                                       * HMI/PLC and/or DCS
            Senior Process Plant                                                programming and troubleshooting
                                           Freeport-McMoRan
7-Feb   Automation Tech - Mill - Chino,                             Chino, CA    experience ... including hard hat,    1   1
                                             Copper & Gold
                    NM                                                          hearing protection, safety glasses,
                                                                                 safety foot wear, and as... more
                                                                                  Hydraulics Schematics Must be
                                                                               Certified in PLC Programming Have
                                                                               experience in: industrial mechanical
8-Feb        Machine Electrician                                   Corona, CA
                                                                                maintenance work with electrical
                                                                                systems test equipment including
                                                                                            but not... more
                                                                                   classification, plans, detailed
                                                                                drawings, PLC I/O schematics and
           Lead Electrical Designer -                              Costa Mesa, control diagrams. This person will
9-Feb                                     Marmac Field Services
                   AutoCAD                                              CA           visit job sites to verify field
                                                                                        conditions. Will work
                                                                                    independently with... more
                                                                               Control circuits 480V power devices
                                                                                   Strong PLC knowledge Good
                                                                     Moreno            communication skills ...
9-Feb         Maintenance Tech                 Walgreens
                                                                    Valley, CA      Requirements: Mechanical,
                                                                                  electrical, PLC troubleshooting,
                                                                                 hydraulic and pneumatic... more
                                                                                       Motor Control Centers,
                                                                                 Transformers and PLC?s.Perform
        Maintenance Technician - 1st,                               Anaheim,       Planned, Preventative and ...
9-Feb                                      Advantage Staffing
               2nd, 3rd shift                                           CA      certificate preferred. - Experience
                                                                                    in PLC troubleshooting and
                                                                                       programming is... more




                                                             102
                                                                                  switches, sensors, power supplies,
                                                                                   PLC's, touch screens, and robots.
           Outside Sales - Industrial    Provoast Automation        Garden        These products are all well known
9-Feb
                 Automation                    Controls            Grove, CA      and respected in the industry.This
                                                                                 position involves: Direct technical...
                                                                                                  more
                                                                                       - Motor Control Centers,
                                                                                   Transformers and PLC's. Perform
         Maintenance Technicians - 2nd                             Anaheim,          Planned, Preventative and ...
10-Feb
                 and 3rd shift                                        CA          certificate preferred. - Experience
                                                                                      in PLC troubleshooting and
                                                                                        programming is... more
                                                                                 controllers, radio controlled cranes
                                                                                 and PLC controllers.Must be willing
                                                                                  to work ... mill environment. Able
13-Feb    MAINTENANCE ELECTRICIAN               Adecco            Fontana, CA                                             1
                                                                                      to comply with strict safety
                                                                                 requirements that includes the use
                                                                                                of... more
                                                                                   in a manufacturing environment
                                                                                   using PLC logic controls is a plus,
                                                                                   specifically in the Microsoft .Net
13-Feb     Microsoft .net Developer      Robert Half Technology    Irvine, CA
                                                                                   environment using C# Education
                                                                                 Requirements - At least a four-year
                                                                                            degree in... more
                                                                                   plant operations. We are part of
                                                                                   Invensys plc, a $4.4 billion global
             HR Intern- Resourcing                                Lake Forest,   industrial automation, controls and
14-Feb                                         Invensys
                 Administrator                                        CA                  transportation group
                                                                                 headquartered in London, England.
                                                                                      Invensys is a major... more




                                                            103
                                                                                ases of machinery and facility
                                                                             maintenance. competitive wages,
                                                                  San            benefits & 401k. Please send
14-Feb     Maitenance Mechanic         Haley Brothers         Bernardino,          resume to (800) 894 9956
                                                                  CA           FABRICATION, ELECTRICAL, PLC,
                                                                            CNC, MECHANICAL, HYDRAULICS,...
                                                                                              more
                                                                            New York, Yellowbook is owned by
                                                                              Yell Group, PLC, one of the Top 3
         Media Consultant - Outside                                         directory publishers in the world. It
14-Feb                                  Yellowbook            Covina, CA
                  Sales                                                       is publicly traded on the London
                                                                                Stock Exchange. According to
                                                                                         Selling... more
                                                                             and protect against identity theft.
                                                                            Experian plc is listed on the London
                                                              Costa Mesa,      Stock Exchange (EXPN) and is a
14-Feb    Senior Product Manager          Experian
                                                                  CA         constituent of the FTSE 100 index.
                                                                              Total revenue for the year ended
                                                                                         March... more
                                                                                 manager ensures the project
                                                                                lifecycle (PLC) is followed and
                                                                               coordinates with ... and deliver
14-Feb      Sr. Project manager          Intellect IT          Irvine, CA
                                                                              presentations weekly and at PLC
                                                                                stage The ideal candidate will
                                                                                       possess a... more
                                                                              plant operations. We are part of
                                                                              Invensys plc, a $4.4 billion global
         Process Control System Site                                        industrial automation, controls and
15-Feb                                    Invensys            Corona, CA
            Installation Manager                                                     transportation group
                                                                            headquartered in London, England.
                                                                                  Invensys is a major... more



                                                        104
                                                                                   issues. : Ensure the project lifecycle
                                                                                     (PLC) is followed and coordinates
                                           Ims - International       Fountain
15-Feb     Project Manager - Contract                                                with ... and deliver presentations
                                          Management Systems         Valley, CA
                                                                                      weekly and at PLC stage gates. :
                                                                                      Work with engineering... more
                                                                                    Kofax plc is the leading provider of
                                                                                      Intelligent Capture & Exchange
         Sr. Engineer Quality Assurance                                               solutions, providing application
15-Feb                                            Kofax              Irvine, CA
                   (U12-069)                                                         software and OEM/POS software
                                                                                      worldwide as well as hardware
                                                                                           distribution in... more
                                                                                    Kofax plc is the leading provider of
                                                                                      Intelligent Capture & Exchange
          Sr. Engineer Software (U12-                                                 solutions, providing application
15-Feb                                            Kofax              Irvine, CA
                      067)                                                           software and OEM/POS software
                                                                                      worldwide as well as hardware
                                                                                           distribution in... more
                                                                                   and organization evolves Preferred
                                                                                      * PLC programming and trouble
         Sr. Manager, Equipment Design                              Lake Forest,    shooting * Project management *
15-Feb                                    Herbalife International
                (Packaging/Mfg)                                         CA               Cost tracking and control
                                                                                    Experience: Required * 5-7+ years
                                                                                          of experience in... more
                                                                                    Kofax plc is the leading provider of
                                                                                      Intelligent Capture & Exchange
                                                                                      solutions, providing application
15-Feb    Staff Accountant (U12-065)              Kofax              Irvine, CA
                                                                                     software and OEM/POS software
                                                                                      worldwide as well as hardware
                                                                                           distribution in... more




                                                              105
                                                                                 Kimberly-Clark and its well-known
                                                                                 global brands are an indispensable
                                                                    Fullerton,   part of life for people in more than
16-Feb     ENGINEER IV ELECTRICAL           Kimberly Clark
                                                                        CA      150 countries. Every day, 1.3 billion
                                                                                  people - nearly a quarter of the...
                                                                                                  more
                                                                                     be proficient with AutoCAD-
                                                                                      Experience with PLC Wiring
                                                                                       Diagrams- Demonstrated
                                                                   Costa Mesa,
16-Feb           I&C Designer            Trs Staffing Solutions                 experience preparing electrical one
                                                                        CA
                                                                                     line drawings- Control Panel
                                                                                 Design-Experience with hydraulic...
                                                                                                  more
                                                                                 and Microsoft Office applications.
                                                                                      Adhere to safety practices,
           Hydroelectric Specialist I    Metropolitan Water         La Verne,     clearance procedures and ... that
17-Feb                                                                                                                  1
                 (Electrical)                 District                  CA          require careful adherence to
                                                                                   mandatory safety precautions,
                                                                                      rules and regulations. more
                                                                                FSC setup and updates, surrogation
                                                                                    and PLC, spec approvals, OCN
          Sr. Associate, Distribution                              Costa Mesa,     and/or color change follow-up,
17-Feb                                  Hyundai Motor America
                   Planning                                             CA      follow-up on model launch timings,
                                                                                apply surrogation, troubleshoot any
                                                                                          data issues,... more
                                                                                and analytical skills Understand PLC
                                                                                functionality Strong coaching and ...
                                                                   Lake Forest,
17-Feb   Supervisor, HIM Maintenance    Herbalife International                         fast past, results driven
                                                                        CA
                                                                                  environment Formal PLC training
                                                                                 Education: Required 2 year... more




                                                             106
                                                                                 Equipment Maintenance Mechanic
                                                                                         II (3rd Shift) Equipment
            Equipment Maintenance                                                    Maintenance Mechanic II (3rd
18-Feb                                           Watson             Corona, CA
             Mechanic II (3rd Shift)                                             Shift)Watson Pharmaceuticals, Inc.
                                                                                  (NYSE: WPI) is a leading integrated
                                                                                     global pharmaceutical... more
                                                                                       up to 600VAC. C. Also, PLC
                                                                                  knowledge, D. PLC communication
                                           IMI Material Handling                     cabling (ControlNet, EtherNET,
20-Feb      Electricians ( Industrial )                             Rialto, CA
                                                 Logistics                         Profibus, or similar; E. familiarity
                                                                                      with Distributed IO systems
                                                                                         (DeviceNet, AS-I... more
                                                                                 AM***** Preferred Experience and
                                                                                       Skills: PLC trained in Fanuc,
                                                                    Riverside,   Siemens or Allen Bradley controls is
20-Feb         Facility Electrician              Goodrich
                                                                       CA          a huge plus. MS Office skills with
                                                                                      Word, Excel, and Outlook are
                                                                                               highly... more
                                                                                 is actively in support of an involved
                                                                                  in safety programs.Responsibilities
                                                                    La Habra,     include ... include the following:a.)
20-Feb   Industrial Electrician/Mechanic   Kroger Manufacturing                                                           1
                                                                       CA               Connecting to the PLC;b.)
                                                                                   Troubleshooting I/O;c.) Reading...
                                                                                                    more
                                                                                    plant operations. We are part of
                                                                                   Invensys plc, a $4.4 billion global
          Senior Consultant - Asset                                              industrial automation, controls and
20-Feb                                           Invensys           Irvine, CA
         Management - North America                                                        transportation group
                                                                                 headquartered in London, England.
                                                                                       Invensys is a major... more




                                                              107
                                                                                     plant operations. We are part of
                                                                                     Invensys plc, a $4.4 billion global
         Sr Systems Design Engineer -                                              industrial automation, controls and
20-Feb                                        Invensys               Corona, CA
              Senior Boiler Tuner                                                             transportation group
                                                                                   headquartered in London, England.
                                                                                          Invensys is a major... more
                                                                                     or equivalent Skills in conveyors,
                                                                                        PLC, Crown Forklifts, welding,
                                                                         San
           2nd Shift Maintenance                                                    milling machines, hand and power
22-Feb                                    Dollar Tree Stores         Bernardino,
           Tech/Battery Changer                                                       tools, and electrical motors P.C.
                                                                         CA
                                                                                         literate Previous warehouse
                                                                                               experience... more
                                                                                       and written instructions while
                                                                                      adhering to safety guidelines to
                                                                         San
           2nd Shift Maintenance                                                           ensure equipment is ... or
22-Feb                                    Dollar Tree Stores         Bernardino,                                           1
           Tech/Battery Changer                                                     equivalent Skills in conveyors, PLC,
                                                                         CA
                                                                                    Crown Forklifts, welding, milling...
                                                                                                      more
                                                                                    material handling control systems,
                                                                                        including PLC/PC controllers,
                                                                                           industrial networks and ...
         Associate Systems Engineer -
22-Feb                                         Target                 Rialto, CA    Requirements - Bachelor's degree
                Rialto, CA Job
                                                                                          in Electrical Engineering or
                                                                                       equivalent degree - PLC/PC p...
                                                                                                      more
                                                                                         design, implementation and
                                                                                        modification of safety-critical
                                                                      Anaheim,       control systems for ... -Processes
22-Feb     Senior Controls Engineer     Disney Parks & Resorts                                                             1
                                                                         CA        *OO Programming techniques *PLC
                                                                                            programming experience
                                                                                                *Industrial... more



                                                               108
                                                                                      in a manufacturing environment is
                                                                                      required. PLC controls engineering
                                                                       Irwindale,      experience is preferred. Process
22-Feb        Sr. Project Engineer            Millercoors
                                                                           CA          design and utilities experience as
                                                                                       well as an understanding of NFPA
                                                                                                 70E and... more
                                                                                       plant operations. We are part of
                                                                                       Invensys plc, a $4.4 billion global
         Consultant II - Applications and                             Lake Forest,   industrial automation, controls and
23-Feb                                          Invensys
                  Engineering                                             CA                  transportation group
                                                                                     headquartered in London, England.
                                                                                           Invensys is a major... more
                                                                                     controllers, radio controlled cranes
                                                                                     and PLC controllers. Must be willing
                  Maintenance                San Bernardino
                                                                                       to work in a ... mill environment.
23-Feb        Electrician/Electronic        Employment and            Fontana, CA                                            1
                                                                                       Able to comply with strict safety
                   Technician               Training Agency
                                                                                     requirements that includes the use
                                                                                                     of... more
                                                                                      Kelly Engineering is in search for a
                                                                                          Maintenance Mechanic for a
          Maintenance Mechanic - 3rd        Kelly Engineering         Santa Ana,        manufacturing company in the
23-Feb
                    Shift                       Resources                CA           Orange county area. The schedule
                                                                                       is third shift: 10:30pm - 7:00am.
                                                                                             Knowledge and... more
                                                                                          fixes Plant projects & repairs
                                                                                         Identify safety issues and take
             Manufacturing Plant                                                         action Machining ... Skills and
23-Feb                                            SPX                  Brea, CA                                              1
            Maintenance Mechanic                                                          Abilities CNC equipment PLC
                                                                                       controls Machining Production...
                                                                                                       more




                                                                109
                                                                                area and safeguarding against
                                                                            those hazards. PLC troubleshooting
                                                                            skills. Strong knowledge and ability
24-Feb   Maintenance Mechanic                                 Orange, CA
                                                                              to perform electrical wiring from
                                                                               low voltage control wiring up to
                                                                                          and... more
                                                                            documents, etc. Follow and comply
                                                                              with all safety and work rules and
                                  Www.mattsonresources.       Fullerton,    regulations. Maintain departmental
24-Feb   Maintenance Mechanic                                                                                       1
                                         com                      CA            housekeeping standards. Apply
                                                                             here directly or email resume to...
                                                                                              more
                                                                                area and safeguarding against
                                                                            those hazards. PLC troubleshooting
                                                                            skills. Strong knowledge ... controls
24-Feb   Maintenance Mechanic                                 Orange, CA
                                                                                with multiple interlocking and
                                                                             safety devices and requiring use of
                                                                                        conduit... more
                                                                                   with Programmable Logic
                                                                                Controllers -- PLC (for example,
          Mechanic - Production                               Riverside,         understanding instructions, ...
24-Feb                                    Pepsi
            Maintenance Job                                      CA          documentation, and/or navigation
                                                                               for A-B PLC-5 and A-B SLC-500) -
                                                                                      Performing... more
                                                                                    production equipment
                                                                              *Program/troubleshoot PLC/SLC
         NWNA Line Maintenance                                               and operator interface panels and
24-Feb                               Nestle Waters Na         Ontario, CA
              Mechanic                                                      ... knowledge of Production related
                                                                              equipment *PLC troubleshooting,
                                                                               Welding and fabricating... more




                                                        110
                                                                                  switches, sensors, power supplies,
                                                                                   PLC's, touch screens, and robots.
           Outside Sales - Industrial                                Garden        These products are all well known
24-Feb                                            Opex
                 Automation                                         Grove, CA     and respected in the industry. This
                                                                                  position involves: Direct technical...
                                                                                                   more
                                                                                     projections and requirements.
                                                                                       Adhere to safety codes and
          Maintenance Supervisor 3rd                                                   guidelines and safety info ...
25-Feb                                            Teva              Irvine, CA                                             1
                    shift                                                         evaluation of assigned employees,
                                                                                         safety performance, and
                                                                                        conformance to all... more
                                                                                  dimensioning and tolerance within
                                                                                     control PLC hardware layout /
                                          Brinderson Engineers &   Costa Mesa,    switchboard circuit breaker / relay
27-Feb        Electrical Designer
                                               Constructors            CA           components panels with NEMA
                                                                                        guidelines Experience with
                                                                                          hazardous area... more
                                                                                      * Strong electrical, hydraulic,
                                                                                       pneumatic, PLC experience
                                                                                     required. * Must be able to ...
27-Feb   Industrial Electrical Mechanic         Emerson             Chino, CA
                                                                                    systems, AC/DC motors, drives,
                                                                                      controls, PLC and solid state
                                                                                      electronics. * Weeke,... more
                                                                                   Digital/PLC knowledge desired. BS
                                                                                     in Electrical preferred. Project
         PRINCIPAL PROJECT MANAGER                                 Lake Forest,       Manager to lead large digital
27-Feb                                           Invensys
                  - NUCLEAR                                            CA         upgrade projects including RPS and
                                                                                      ESFAS replacements, turbine
                                                                                        controls and other... more




                                                             111
                                                                                     Basic electrical troubleshooting.
                                                                                  Prefer PLC expereince. Must have 5
                                            Graham Packaging          Santa Ana,     years mechanical experience in
28-Feb             Mechanic
                                                Company                    CA      manufacturing environment. Must
                                                                                  be able to workin a 24/7 facility and
                                                                                              able to... more
                                                                                   Account Manager - OEM Regional
                                                                                  Honeywell Automation and Control
            Account Manager OEM                                        Anaheim,       Solutions (ACS) is a $10 billion
29-Feb                                    Honeywell International
                  Regional                                                 CA       strategic business group applying
                                                                                   sensing and control expertise that
                                                                                            helps create... more
                                                                                       and tolerance within control
                                                                                     including PLC hardware layout /
           ELECTRICAL DESIGNER -
                                                                     Costa Mesa, switchboard circuit breaker / relay
29-Feb   Petrochemical / Refining / Oil    Pts Staffing Solutions
                                                                           CA        components panels with NEMA
                  and Gas
                                                                                        guidelines Experience with
                                                                                          hazardous area... more
                                                                                      to perform light MIG welding -
                                                                                       Troubleshoot PLC equipment
                                                                                       reading mili-amps -Diagnose
           Maintenance Mechanic /
29-Feb                                         Allegis Group          Covina, CA   equipment malfunctions -Efficient
                 Technician
                                                                                     with Preventative Maintenance
                                                                                      (PMs) schedules All qualified...
                                                                                                   more
                                                                                   components. 7. Develop, test, and
                                                                                  implement PLC programs and logic.
          Maintenance Technician (                                                 8. Write Change Control Requests,
29-Feb                                           B.Braun               Irvine, CA
            Advanced - Master)                                                          Computer System Change
                                                                                      Requests, Requests for Capital
                                                                                         Investments, and... more



                                                               112
                                                                               such as Programmable Logic
                                                                               Controllers (PLC), electronic
           Substation Automation      Southern California                     meters, battery chargers, ... *
29-Feb                                                        Pomona, CA                                                 1
         Engineer (ENG2)(71000313)         Edison                            Maintaining a safety conscious
                                                                             work environment by following
                                                                          Edison safety protocols and... more
                                                                             of various Programmable Logic
                                                                               Controllers (PLC's) and touch
           Control System Design                                              screen operator interfaces to
1-Mar                                 Securetek Solutions     Orange, CA
                 Engineer                                                      perform the required control
                                                                          algorithms. Programming of various
                                                                                loop controllers for... more
                                                                           controls systems electrical design,
                                                                              and PLC/HMI software design;
          Controls Project Engineer                                         ability to analyze, investigate and
1-Mar                                      B.Braun             Irvine, CA                                            1
                  Specialist                                                propose approaches to technical
                                                                            challenges relating to equipment
                                                                                    automation... more
                                                                           controls systems electrical design,
                                                                              and PLC/HMI software design;
          Controls Project Engineer                                        ability to analyze, ... To learn more
1-Mar                                      B.Braun             Irvine, CA                                            1   1
                  Specialist                                                  about B. Braun and our safety
                                                                              healthcare products or view a
                                                                                       listing... more
                                                                           g and Experience Good leadership
                                                                          skills, decision maker, training skills,
                                                                             communication skills, and team
1-Mar       Lead Craftsperson III          B.Braun             Irvine, CA
                                                                               building skills. C. Knowledge
                                                                                 Required PLC knowledge.
                                                                                   Knowledge of... more




                                                        113
                                                                                panels, programmable logic
                                                                          controllers (PLC's), solenoid valves,
                                     Volt Information          Fullerton,
1-Mar    Maintenance Mechanic                                             alarm systems, ... mechanic should           1
                                         Sciences                  CA
                                                                            follow all written safety policies,
                                                                           health policies and guiding... more
                                                                                   with all applicable code
                                                                          requirements and safety standards
                                                              Costa Mesa,      (including ASME CSD1, UL, ...
1-Mar     QA Electrical Engineer    Mattsonresources                                                                   1
                                                                   CA     DESIRED SKILLSStrong knowledge of
                                                                             PLC based control components
                                                                                          and... more
                                                                             -Integrate SCADA Systems with
                                                                            multiple PLC platforms -Develop
                                                                              reporting, historical data and
1-Mar   SCADA/HMI Programmer        Amtec Engineering         Walnut, CA                                           1
                                                                               alarming packages - Perform
                                                                            program simulation and testing -
                                                                                 Start up services -... more
                                                                           automation market with emphasis
                                                                              on PLC's, drives, control logic,
         Account Manager OEM                                   Anaheim,      discrete and/or process control
2-Mar                                  Honeywell
               Regional                                            CA            applications o the line-volt
                                                                          electrical heating business - in-floor
                                                                                         heat,... more
                                                                           team building skills. C. Knowledge
                                                                                  Required PLC knowledge.
                                                                           Knowledge of personal ... To learn
2-Mar   Maintenance Team Lead III   B. Braun Medical           Irvine, CA                                              1
                                                                          more about B. Braun and our safety
                                                                              healthcare products or view a
                                                                                        listing... more




                                                        114
                                                                                     controls. Troubleshoot ladder logic
                                                                                     and PLC communications problems.
        Sr. Controls Engineer Specialist                                                 6. Require high ... analysis and
2-Mar                                             B.Braun              Irvine, CA
               (MES SCADA Exp)                                                         development of equipment PLC
                                                                                     controls. Qualified candidates must
                                                                                                  have... more
                                                                                          design. Instructs students in
                                                                                        laboratory safety procedures if
                Electronics                                               San
                                                                                      applicable. Performs ... Experience
3-Mar   Telecommunications Instructor      ITT Technical Institute    Bernardino,                                                   1
                                                                                       with DC, AC, Semiconductors, Op
                 - Adjunct                                                CA
                                                                                            Amps, Communications,
                                                                                      PLC/Control Systems, Digi... more
                                                                                         specialty. About Invensys plc:
                                                                                     Invensys plc is a global automation,
             Principal Software                                       Lake Forest,    controls and ... industries perform
6-Mar                                             Invensys                                                                   1      1
        Engineer/Technical Lead -HMI                                      CA          with greater efficiency, safety and
                                                                                     cost-effectiveness. Industry areas...
                                                                                                      more




                                                                                                                                            VFD systems
                                                                                                                                   Safety
                                                                                                                             HMI
                                                                                                                             14    25            2




                                                                115
                                                                   Appendix F
                              Course Maps for all Manufacturing, Machining, and Supply Chain Technology certificates

                                                             Supply Chain Technology
                    Application of
                                                                               Describe how                                              Present formal
                         routing                                                                  Application of         Compose
                                        Describe the       Knowledge of       ArcGIS (a GPS                                             presentations as
                     problems and                                                                PLCs to design,          written
                                           role of         how to create            fleet                                                  required by
                       algorithms                                                                  configure and     assignments on
                                      transportation in        Radio           management                                                  technicians
     Course             related to                                                                drive conveyor        occupation
                                        the economy          Frequency          and routing                                                working the
                     transportation                                                              belt systems for   safety in general
                                         and supply        identification        system by                                               field of supply
                    and delivery of                                                              the supply chain     industry on an
                                           chain;         (RFID) systems;     ESRI) is used in                                                chain
                       goods and                                                                     industry.       advanced level.
                                                                                  industry;                                                technology
                        services;
  SCT-2 Supply
Chain Technology
                                            I, D                 I
  Analysis and
     Models
  SCT-3 Supply
                                                              I, D, M                                   I                I, D, M
Chain Technology
      SCT-4
 Transportation
                        I, D, M            I, D, M                                I, D, M
 Technology and
 Vehicle Routing                                                                                                                        I, D, M
 MAN-55 OSHA
  Standards for                                                                                                          I, D, M
General Industry
    MAN-64
 Programmable                                                                                        I, D, M
Logic Controllers
ENE-27 Technical
                                                                                                                         I, D, M
Communications                                                                                                                                I, D
    Electives
ELE-10 Survey of
                                                                                                       I, D
   Electronics



                                                                        116
       OR
 ELE-21 DC-AC
                         I, D
   Electronics
       OR
  ELE-23 Elect
  Devices and            I, D
     Circuits
       OR
   ELE-11 DC
                         I, D
   Electronics
      AND
   ELE-13 AC
                         I, D
   Electronics


  I=Introduced
  D=Developed
and Practed with
    feedback
M=Demonstrated
 at the Mastery
      Level
 Appropriate for
   Graduation




                   117
                                                       Computer Numerical Control Programming
                                            Create a portfolio
                                           which may include
                                                                                      Solve formulas by
                                               printouts of
                                                                                       using unknowns          Establish a
                                           Mastercam or other                                                                  Create, manipulate,
                     Create a steam or                                                  and apply this         systematic
                                            Computer Aided       Compose written                                                  and indentify
                    stirling engine that                                             knowledge to solve       approach to
                                              Manufacturing       assignments on                                                multibody solids
    Course         involves parts using                                                   problems          recognizing the
                                            program part file    occupation safety                                              and use them in a
                     both the mill and                                                  encountered in          essential
                                                drawings,       in general industry.                                           meaningful part and
                          the lathe.                                                 technological areas   information given
                                             numerical code                                                                     assembly design.
                                                                                      and various fields     on a blueprint.
                                           files and operation
                                                                                       of engineering.
                                               sheets on an
                                             advanced level.
     ENE-52
    Geometric
                                                                                                                   I                  I, D
Dimensioning and
   Tolerancing
ENE-60 Math for
   Engineering               I                                                             I, D, M                                      I
   Technology
   MAN-56 CNC
 Machine Set-up           I, D, M                I, D, M                                      I                    I                    I
  and operation
   MAN-53 Adv
 Computer-Aided           D, M                   D, M                                                                                 D, M
  Manufacturing
   MAN-57 CNC
                                                 I, D, M
 Program Writing
  MAN-55 OSHA
  Standards for                                                       I, D, M
General Industry
     ENE-42
                                                                                                                                     I, D, M
   Solidworks I
ENE-30 Computer
                                                    I                                                                                 I, D
  Aided Drafting


                                                                        118
ENE-51 Blueprint
                    I                   I   I, D, M
    Reading
   MAN-52
Computer Aided
                    I   I, D, M                       I, D
 Manufacturing-
  Mastercam

  I=Introduced
D=Developed and
  Practed with
    feedback
M=Demonstrated
 at the Mastery
Level Appropriate
 for Graduation




                                  119
                                                  Automated Systems Technician Certificate Program
                                                                                      Solve
                                                                                  formulas by
                                                                                                                    Demonstrate
                                                                                      using
                                    Demonstrate                                                                     quantitative
                                                                                   unknowns           Write
                                   the installation                                                              measurement of
                      Compose                         Set-up and    Establish a    and apply       descriptive
                                    maintenance                                                                  electrical circuit
                       written                       operate fluid  systematic         this            and                              Explain the
                                         and                                                                        parameters;
                    assignments                         powered    approach to     knowledge      operational                         basic operation
                                  troubleshooting                                                                  assemble, and
                         on                              valves,   recognizing       to solve     instructions                              of a
     Course                               of                                                                      test both direct
                     occupation                        cylinders,  the essential    problems           for                            microprocessor
                                   Programmable                                                                     current and
                      safety in                         controls   information    encountered nontechnical                                   /
                                    Logic Control                                                                    alternating
                       general                        filters, and  given on a          in           users of                         microcontroller.
                                       systems                                                                     current series,
                      industry.                        actuators.   blueprint.   technological      technical
                                     (PLCs) and                                                                     parallel, and
                                                                                    areas and     information
                                    PLC modules                                                                    series parallel
                                                                                     various
                                                                                                                      circuits.
                                                                                    fields of
                                                                                  engineering.
ELE-10 Survey of
                         I                                                            I, D                            I, D, M
   Electronics
      ELE-26
Microprocessors
                                                                                                                                          I, D, M
       and
Microcontrollers
   ELE/ENE-27
    Technical                                                                                         I, D
Communications
ENE-51 Blueprint
                                                                      I, D, M
     Reading
ENE-60 Math for
   Engineering                                                                        I, D
   Technology
  MAC/MAN-55
  Occupational
                      I, D, M
Safety and Health
 Administration


                                                                       120
    MAN-60
 Hydraulics and
                              I, D, M         D, M
   Pneumatic
    Systems
    MAN-64
 Programmable       I, D, M
Logic Controllers


  I=Introduced
  D=Developed
and Practed with
    feedback
M=Demonstrated
 at the Mastery
      Level
 Appropriate for
   Graduation




                                        121
                                           Computer Aided Production Technology Certificate program
                          Demonstrate                            Create a portfolio
                           sufficient                           which may include Solve formulas by
                         proficiency to                             printouts of      using unknowns                                 Establish a
                         apply for and      Create a steam or Mastercam or other       and apply this                                systematic
                                                                                                           Compose written
                      obtain entry-level   stirling engine that  Computer Aided     knowledge to solve                              approach to
                                                                                                            assignments on
      Course          employment in the       involves parts       Manufacturing         problems                                 recognizing the
                                                                                                           occupation safety
                       field of computer   using both the mill   program part file     encountered in                                 essential
                                                                                                          in general industry.
                      numerical control       and the lathe.         drawings,      technological areas                          information given
                         and computer                             numerical code     and various fields                            on a blueprint.
                       aided production                         files and operation   of engineering.
                          technology.                                  sheets.
 ENE-51 Blueprint
                              I                                                                                                        D, M
      Reading
 ENE-60 Math for
   Engineering                I                                                            D, M
    Technology
  MAN/MAC-55
Occupational Safety
                                                                                                                I, D, M
    and Health
  Administration
MAN/MAC-56 CNC
Machine Set-up and           I, D               I, D, M                I, D                                                             D
     Operation
 Electives choose
    from below
MAN-52 Computer-
       Aided
                             I, D                 I, D               I, D, M
  Manufacturing-
    Mastercam
MAN/MAC-57 CNC
                             I, D                 I, D               I, D, M
 Program Writing
MAN-59 Computer-
       Aided                 I, D                 I, D               I, D, M
  Manufacturing-


                                                                      122
    GibbsCAM




   I=Introduced
 D=Developed and
   Practed with
     feedback
M=Demonstrated at
 the Mastery Level
  Appropriate for
    Graduation




                     123
Appendix H, From: Metalworking Trends Survey, March 2012, Published by: Techspex and LoSasso Advertising Inc.

Methodology
The survey was e-mailed to a broad cross section of the metalworking industry during February 2012. There were
1012 surveys completed. Results presented in this report do not include respondents who indicated they were
non-manufacturers or whose operations were outside North America.
Geography:
* 84% USA
* 7% Canada
* 2% Mexico
* 4% Other




                                                                              124
Appendix I, From: Metalworking Trends Survey, March 2012, Published by: Techspex and LoSasso Advertising Inc.

Methodology
The survey was e-mailed to a broad cross section of the metalworking industry during February 2012. There were
1012 surveys completed. Results presented in this report do not include respondents who indicated they were
non-manufacturers or whose operations were outside North America.
Geography:
* 84% USA
* 7% Canada
* 2% Mexico
* 4% Other




                                                                              125

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:8
posted:9/29/2012
language:Unknown
pages:125