Docstoc

THEFT-DETERRENT SYSTEM

Document Sample
THEFT-DETERRENT SYSTEM Powered By Docstoc
					                                          THEFT-DETERRENT SYSTEM

                                        THEFT-DETERRENT SYSTEM
OUTLINE
                                                                                                              A6E812050000T01
    • The theft-deterrent system includes sound and light alarms that activate when the bonnet, the trunk lid (4SD) or
      liftgate (5HB), or a door is opened by means other than the transmitter. The turn lights flash and the horn and
      the theft-deterrent siren sound.
    • When the transmitter unlock button is pressed, the alarms stop.
    • An intruder sensor has been installed in the forward part of the roof (without sliding sunroof) or in the center
      part of the roof (with sliding sunroof). The intruder sensor senses movement in the vehicle based on radio
      waves, and sends an alert signal to the theft-deterrent control module.
    • A theft-deterrent siren has been installed on the rear, left side of the trunk (4SD) or liftgate (5HB). The theft-
      deterent siren includes an internal back-up power supply so that if power from the battery is cut by any means,
      the siren will still sound.
End Of Sie
STRUCTURAL VIEW
                                                                                                              A6E812050000T02




                                                                                                                                T




                                                                                                                 A6E8120T002
.


     1   Horn                                                     10   Door lock-link switch
     2   Horn relay                                               11   Door switch
     3   Bonnet switch                                            12   Flasher unit
     4   Transmitter                                              13   Theft-deterrent control module
     5   Security light                                           14   Theft-deterrent siren
     6   Key reminder switch                                      15   Trunk lid light switch (4SD)
     7   Intruder sensor (Vehicles without sliding sunroof)            Cargo compartment light switch (5HB)
     8   Intruder sensor (Vehicles with sliding sunroof)          16   ABS (ABS/TCS) HU/CM
     9   Door lock timer unit


                                                                                                                   T–43
                                          THEFT-DETERRENT SYSTEM
End Of Sie
SYSTEM WIRING DIAGRAM
                                                                                                   A6E812050000T03




                                                                                                      A6E8120T001
.


     1   Theft-deterrent control module                12   Door switch (driver’s side)
     2   Key reminder switch                           13   Door switch (ecept driver’s side)
     3   Flasher unit                                  14   Passenger’s door lock-link switch
     4   Turn light                                    15   Rear door lock-link switch (right)
     5   Hazard warning switch                         16   Rear door lock-link switch (left)
     6   Door lock timer unit                          17   Trunk compartment light switch (4SD)
     7   Theft-deterrent siren                              Cargo compartment light switch (5HB)
     8   Intruder sensor                               18   Bonnet switch
     9   Driver’s door lock-link switch                19   Horn relay
    10   Instrument cluster                            20   Horn
    11   Security light


End Of Sie




T–44
                   THEFT-DETERRENT SYSTEM
SYSTEM FLOWCHART
                                            A6E812050000T04




                                                              T




                                               A6E8120T007

End Of Sie




                                                 T–45
                                        THEFT-DETERRENT SYSTEM
THEFT-DETERRENT SIREN
                                                                                                           A6E812050000T05
 • The theft-deterrent siren is located on the rear, left side of the trunk lid (4SD) or liftgate (5HB).
 • Controlled by the following vehicle conditions:
   — Standard alert control
   — Open circuit alert control

Standard Alert Control
 • The siren beeps when receiving an alert initialization signal from the theft-deterrent control module. When a go-
   to-initial signal is received the siren is stopped.




                                                                                                              A6E8120T004


  1    Theft-deterrent control module                             3    Alert initialization signal
  2    Theft-deterrent siren                                      4    Siren beeps



Open Circuit Alert Control
 • A back-up power supply is integrated in the theft-deterrent siren.
 • When an open circuit is detected in the related wiring harness, the theft-deterrent siren beeps using the back-
   up power supply.
 • If any one of the following conditions are met, the siren is stopped:
   — Detects that all related wiring harness are properly connected.
   — Receives go-to-initial signal from the theft-deterrent control module.




                                                                                                              A6E8120T005


  1    Theft-deterrent control module                             5    Appro. 30 seconds
  2    Theft-deterrent siren                                      6    Appro. 5 seconds
  3    Siren beeps                                                7    Maimum 9 cycles
  4    Siren stops


End Of Sie




T–46
                                         THEFT-DETERRENT SYSTEM
INTRUDER SENSOR
                                                                                                            A6E812050000T06
Outline
 • The intruder sensor is located in center part of the roof on sliding sunroof-equipped vehicles or the forward part
   of the roof on sliding sunroof non-equipped vehicles.
 • The intruder sensor detects movement in the vehicle by radio waves and sends the detection signal to the
   theft-deterrent control module.
 • An intruder sensor cut-off switch has been installed on the keyless entry system transmitter. If the intruder
   sensor cut-off switch is on while the theft-deterrent system is pre-armed, intruder sensor radio wave output is
   cut, and movement detection is stopped.




                                                                                                               A6E8120T003
.




    1   Intruder sensor (without sliding sunroof)                 3   Transmitter                                             T
    2   Intruder sensor (with sliding sunroof)                    4   Intruder sensor cut-off switch

Operation
 1. When the theft-deterrent system is armed, the intruder sensor outputs a 2.45 GHz radio wave in the passenger
    compartment. The intruder sensor detects phase differences in radio waves (reflected waves) that are output
    and bounced off a target object.
 2. When a phase difference in reflected waves occurs by movement in the vehicle (intruder), the CPU calculates
    the level of phase difference.
 3. If the level of phase difference is higher than specified, the intruder sensor sends a detection signal to the theft-
    deterrent module.




                                                                                                               A6E8120T006
.


    1   Target object                                             5   Oscillator
    2   Receiver                                                  6   CPU
    3   Transmitter                                               7   Detection signal output
    4   Phase detection area                                      8   Theft-deterrent control module

                                                                                                                 T–47
                                       IMMOBILIZER SYSTEM
End Of Sie
                                       IMMOBILIZER SYSTEM
OUTLINE
                                                                                                   A6E812267000T01
 • The immobilizer system is essentially carried over from that of the current TRIBUTE (BU/CU/YU) model’s
   passive anti-theft system (PATS). However, some items have been changed and/or added to improve security.
   Refer to the following table.
Comparison with current TRIBUTE (BU/CU/YU) model
                                Item                                       Comparison
    Key (transponder)
                                                    Same as the current TRIBUTE (BU/CU/YU) model
    Coil
                                                    • DTC B2431 is added.
    On-board diagnostic function
                                                    • Procedure is changed.
    ID number input procedure                       Procedure is changed.

End Of Sie
STRUCTURAL VIEW
                                                                                                   A6E812267000T02




                                                                                                      A6E8122T001
.


      1   Key (transponder)                                3   Security light
      2   Coil                                             4   PCM


End Of Sie




T–48
                  IMMOBILIZER SYSTEM, AUDIO AND NAVIGATION SYSTEM
SYSTEM WIRING DIAGRAM
                                                                                                        A6E812267000T03




                                                                                                           A6E8122T002
.


     1   Instrument cluster                                     4    Coil
     2   Security light                                         5    PCM
     3   Key (transponder)


End Of Sie

                                 AUDIO AND NAVIGATION SYSTEM
OUTLINE (AUDIO SYSTEM)
                                                                                                        A6E812401066T01
    • The center panel module installed with the audio unit and climate control unit (automatic A/C only), and the
      audio switch, A/C switch, hazard warning switch and rear window defroster switch built into the center panel
      has been adopted.                                                                                                   T
    • The audio unit consists of the following parts:
      — Base unit, which has AM/FM tuner and control function for each module
      — Upper module (CD player or CD changer)
      — Lower module (cassette deck or MD player)
      — Cover
    • Upper module (CD player or CD changer) and lower module (cassette deck or MD player) are options.
    • Module availability depends on vehicle grade.
    • The operation of audio unit is the same as that of current XEDOS 9, MILLENIA (TA) models.
    • The audio control switch is equipped on the steering wheel for audio operation.
    • The following two types of antennas have been adopted.
      — Center roof antenna (European (L.H.D. U.K.) specs. and GCC specs. (5HB)): The construction of center
           roof antenna is the same as that of current 323 (BJ) model.
      — Glass antenna (GCC specs. (4SD))
    • Four speakers installed as standard, one each to the front and rear doors, have been adopted. For BOSE
      specified speakers, 7 speakers, including the door speakers, are installed on the inner garnish of the front
      doors (tweeters), and in the rear package (4SD) or temporary spare tire (5HB) (woofer).
    • A noise filter has been installed on the brake light and rear window defroster circuit (GCC specs.), and a
      condenser has been installed on the high-mount brake light and rear wiper motor circuit for improved noise
      reduction.
    • All information related to the audio system appears on the information display’s LCD.
End Of Sie




                                                                                                             T–49

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:4
posted:9/26/2012
language:Unknown
pages:7