Docstoc

Help

Document Sample
Help Powered By Docstoc
					SU-6800 CDMA Mobile Connect

          User Guide




   SpeedUp Technology Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of SpeedUp Technology Co., Ltd.
Notice
The information in this manual is subject to change without notice.Every effort has been
made in the preparation of this manual to ensure accuracy of the contents,but all
statements,information,and recommendations in this manual do not constitute the
warranty of any kind,expressed or implied.
                                                       Table of contents


1. Descriptions of the Terminal Management GUI ....................................................................1
     Launch the Terminal Management ......................................................................................1
     Shortcut Icons .........................................................................................................................1
2.Internet Services .........................................................................................................................1
     Accessing the Internet ...........................................................................................................1
3. SMS .............................................................................................................................................2
     3.1 Creating and Sending a Message.................................................................................2
     3.2 Inbox ..................................................................................................................................2
     3.3 Outbox ...............................................................................................................................2
     3.4 Draft ...................................................................................................................................3
4. Contacts ......................................................................................................................................3
     4.1 Phonebook Management in Local.................................................................................3
            4.1.1 Creating a Contact ...............................................................................................3
            4.1.2 Viewing a Contact.................................................................................................3
     4.2 Phonebook Management in UIM...................................................................................4
     4.3 Phonebook Management in Device..............................................................................4
5. Call ...............................................................................................................................................4
     5.1 Requirements on the System Configuration................................................................4
     5.2 Icons on the Call Interface..............................................................................................4
     5.3 Dialing Through the Call Interface.................................................................................5
            5.3.1 Entering a Phone Number Directly ....................................................................5
            5.3.2 Choosing a Phone Number.................................................................................5
     5.4 Dialing Through the Phonebook ....................................................................................5
     5.5 Dialing Through the Call History....................................................................................5
     5.6 Answering a call ...............................................................................................................5
6.Call History...................................................................................................................................6
7. Log ...............................................................................................................................................6
8.Settings.........................................................................................................................................6
     8.1 Profile Setting ...................................................................................................................6
     8.2 Pin Setting.........................................................................................................................7
            8.2.1 Enable/Disable the PIN Verification...................................................................7
            8.2.2 Modify PIN .............................................................................................................7
            8.2.3 Enter PIN ...............................................................................................................7
            8.2.4 Unlock PIN.............................................................................................................7
9.Information Query .......................................................................................................................8
10.FAQs ...........................................................................................................................................8
11. Mobile Data@Work Service Center .....................................................................................9
1. Descriptions of the Terminal Management GUI
Launch the Terminal Management

After installation wizard is finished, SU-6800 management program         will display on
the desktop of your PC. Double-click the shortcut of the Terminal Management

       on the desktop.
NOTE:
 There is one product model:it has a removable user identity module(R-UIM).
 If you are required to enter the Personal Identification Number(PIN) code,enter the
   correct one.If you fail to enter the correct PIN or PIN Unblocking Key(PUK) code,the
   network-related function are invalid.
Shortcut Icons
The following table lists the shortcut icons provided by the Terminal Management.
Icon                 Description
                     Indicate the signal strength of the network.


                     Display the Connection interface.


                     Display the SMS interface.


                     Display the Phonebook interface.


                     Display the Call interface.


                     Display the Call history interface.


                     Display the Log interface.


                     Display the Setting interface.



2.Internet Services
Accessing the Internet
There are four preset connection profiles(Mobile-8/Esia/StarOne/TELKOMFlexi),after
choosing the network and connection profiles,you can access the network through the
Terminal Management.
You can connect the network by one of the following options:


1. Click          .
2.Select the correct profile in the drop-down arrow.
3.Click Connect to set up the connection.
4.Launch the browser on the PC to access the internet.
NOTE:


                                              1
   When the connection is established,the main interface displays the details of the
    current network ,including connected duration,transferred rate and so on.
   When the connection is established,choose Disconnect to disconnect from the
    network.
3. SMS
The Terminal Management provides SMS services.The local mailbox can store the
message without capacity limitation and can be easily managed.
3.1 Creating and Sending a Message

1.Click       to display the SMS interface.
2.Click      to display the New interface.
3. Enter the recipient number directly and enter the message content,you can input 160
characters per text message.
4.After edit the message,you can choose the following options:
   Click Contact:Choose a contact for sending the message,also you can send the
    message to many contacts at the same time.
 Click Send:To send the message.
 Click Save:To save the message in the draft.
 Click Return:To exit form editing the current message.
NOTE:
 When editing message,it need “Ctrl”+”Enter” to change line and manual will be
   updated.
3.2 Inbox
Inbox stores the received messages.

1.Click        to display the SMS interface.
2.Choose Message->Inbox to display the Inbox interface.
3.Select and click the selected message,the name and phone number of the message
sender,message content and receiving time are displayed below the message list.

4.When you have selected the message, you can click        to delete the message,click

   to reply the message,click     to forward the message to another person.Also,you
can right-click the selected message,then choose Send, Delete,Reply,Forward,save
number.
NOTE:
 When you receive a new message,the prompt dialog box is displayed on the PC
    screen.
 When you selected one more messages, you can right-click the selected message
    and only choose Delete.
 3.3 Outbox
Outbox stores the sent messages,including the messages sent both successfully and
unsuccessfully.

1. Click       to display the SMS interface.


                                              2
2.Choose Message->Outbox to display the Outbox interface.
NOTE:
 For details,refer to Inbox.
3.4 Draft
Draft stores the drafts of messages.
NOTE:
 For details,refer to Inbox.
 If you delete the messages in the Draft,the messages will be deleted permanently.Be
   cautious with your operation.
4. Contacts
You can manage contacts in the phonebook conveniently by the Terminal Management.
4.1 Phonebook Management in Local
You can do as follows to enter the local phonebook:

1. Click       to display the Phonebook interface.
2. Click Local in the navigation tree.
4.1.1 Creating a Contact

1.Click    to display the New Contact interface.
2.Enter the information.
3.Click OK to save the contact.
NOTE:
 You can also right-click in the blank,then click”add” to enter a contact’s imformation.
 The contact information cannot be null or new-line characters only.
4.1.2 Viewing a Contact
You can view a contact as follows:
1.Enter the local phonebook,select a contact to view.
2.Click the selected contact.
The contact name,mobile number are displayed below the contact list.
3.Right-click the selected message,and you can do as follows:
 Delete:Delete the contact.
 Modify:Modify the contact.
 Send Message:Send message to the contact.
 Call:Call the contact.
NOTE:
 When you selected one more contacts, you can right-click the selected contacts and
    only choose Delete.
You can also click the shortcut icons above the contact list to perform the following
operations:

  :Edit the selected contact.

   :Delete the selected contact.

   :Send a message to the mobile number of the contact.


                                            3
   :Make a call to the selected contact.
4.2 Phonebook Management in UIM
IF a UIM card is used in your terminal,you can save the contacts in the UIM card.
The operations on the contacts in the UIM card are similar to those on the contacts in
Local.
For details,refer to Phonebook Management in Local.
4.3 Phonebook Management in Device
For details,refer to Phonebook Management in Local.
5. Call
You can make and answer calls by the Terminal Management.Before using this
function,insert the earphone to the earphone jack on the terminal.
NOTE:
 Launch the Terminal Management before using the function.You cannot call and
    answer the telephone when the Terminal Management is not launched.
For good voice quality,you can do as follows:
 Because the devices of both calling parties can affect the voice quality,it is
    recommended both parties use the headset with a built-in microphone or move into a
    more silent environment.
 If a headset without properly shielded cable is being used,the cable should be kept
    separate form the USB modem and the PC in order to avoid disturbing electrical
    humming noise form the call.
 Adjust the speaker’s and microphone’s volume settings form your audio device’s
    control panel.
 Use an earphone with built-in microphone and adjust the location of the
    microphone,use a separate external microphone or update the audio adapter driver
    to improve the voice quality.
 When there is no built-in microphone in your PC,connect the earphone connector to
    the microphone jack of the audio adapter,and then speak into the earphone.
5.1 Requirements on the System Configuration
To achieve the optimal voice quality,the system configuration of your PC should meet the
following requirements:
 Operating system:Windows 2000,Windows XP or Windows Vista.
 Memory:256M or above.
 Harddisk space:30M or above.
 Full-duplex audio adapter(usually produced after 1998) and headset.
5.2 Icons on the Call Interface
Icon              Description
                  Make a call when you enter the phone number.


                  End a call.


                  Delete the enter numbers one by one.



                                           4
                       Redial the phone number lastest.


                       Decrease/Increase the volume during a call.


                       Mute/Unmute the microphone.
    /
                       Select a phone number from the phonebook.


                       Enter the phone number.
        —
                       Enter”*/+”


                       Enter”#”



5.3 Dialing Through the Call Interface

Click        to display the Call interface.
5.3.1 Entering a Phone Number Directly
1.Click the number keys on the call interface .

2.Click      to dial.
5.3.2 Choosing a Phone Number

1.Click     to display the Phonebook interface.


2.Select a phone number in the list and click        to dial.
5.4 Dialing Through the Phonebook

1.Click          to display the Phonebook interface.
2.Select a contact from the phonebook.

3.Click     to dial.
5.5 Dialing Through the Call History

1.Click         to display Call History interface.
2.Select a call record as follows:
 Select a number in the right list directly.
   Click Answered Calls,Missed Calls or Dialed Calls in the navigation tree,then
    select a record in the list.

3.Click     to dial the number.
5.6 Answering a call



                                                 5
1. Click       to display the Call interface.

2.Click      to answer the call,click        to end the call.
NOTE:
When there is an incoming call,the prompt dialog box is displayed on the lower right
corner of the PC screen,you can click”Agree” to answer the call.click”Refuse” to refuse the
call.
6.Call History
To view Call History,you can do as follows:

1. Click         to display Call History interface.
2.Click the following tabs in the navigation tree to display the corresponding list:
Answered Calls:Store records of answered calls,including name/phone numbers of the
callers,the start time and duration of the calls.
Missed Calls:Store the records of missed calls,including name/phone numbers of the
callers,the start time and duration of the calls.
Dialed Calls:Store the records of dialed calls,including name/phone numbers of the
callers,the start time and duration of the calls.
You can select a call record for the following options:

   Click     :Make a call.

   Click    :Save the phone number.

   Click    :Send a message.

   Click    : Delete the selected record.
7. Log
You can use the statistics function to check the traffic of the network.
You can do as follows to view the statistics information:

1.Click            to display the statistics interface.
2.View the start connected and duration time,the uploaded/downloaded speed and data of
the connection.
3.Choose start time and end time of uploaded and downloaded data,click “Search”,then
the statistics information appears.
4.Click”Reset” to reset all of the statistics information.
8.Settings

Click           to display Setting interface.
8.1 Profile Setting
Click Profile Setting to display profile interface.You can do as follows:

   Click        :Creating a Dial-up Profile,create a new device ,set access number,user


                                                6
    name and password.

   Click        :Editing a Dial-up Profile, select a new device ,edit access number,user
    name and password.

   Click        :Delete a Dial-up Profile,click Yes to confirm or click NO to cancel the
    deletion.

After you do one of the above,you can Click         to save it,Click        to cancel it.
NOTE:
 There are four preset dial-up profiles,and you can’t create,edit or delete any of them.
8.2 Pin Setting
If a UIM card is used in your terminal,the Personal Identity Number(PIN) code protects
your card from unauthorized use.You can modify the PIN code and enable/disable the PIN
verfication.
Note:
 The PIN code and PIN Unblocking Key(PUK)code are provided along with your UIM
    card.For details,contact your service provider.
8.2.1 Enable/Disable the PIN Verification
You can enable the PIN verification.If it is enabled,you need to verify the PIN code when
launching the Terminal Management again.
To enable:Choose Tools—>PinSetting—>Enable PIN Verfication.
To disable: Choose Tools—>PinSetting—>Disable PIN Verfication.
8.2.2 Modify PIN
If the PIN code is enabled,you can modify it.
1.Choode Tools—> PinSetting—>Modify PIN
2.In the Modify PIN dialog box,enter the current PIN code and the new PIN code.
3.Enter the new PIN code again.
4.Click OK to complete the modification.
Note:
 The PIN code should be a numeric string of 4-8 digits.
8.2.3 Enter PIN
When the PIN verification is enabled,you need to enter the correct PIN code to use the
network-related functions.
1. After the Terminal Management is launched,the Enter PIN dialog box is promted.
2. Enter the correct PIN code.
3. Click OK to complete the verification.
Note:
 If you enter wrong PIN codes for a preset number of times,the UIM card is locked and
    you cannot use it until you enter the PUK code.The Terminal Management prompts
    you the remaining number of attempts for entering the PIN code or the PUK code.
8.2.4 Unlock PIN
1. When the UIM card is locked,the Unlock PIN dialog box is displayed after you start the
    Terminal Management.


                                              7
2. Enter the correct PUK code.
3. Enter the new PIN code.
4. Click OK to complete the modification.
9.Information Query
During the running of the software,you can choose Help—>Help to view datacard’s user
guide.
Or you can choose Help—>About to view the information of the Terminal Management.
10.FAQs
What shall I do if I cannot access the internet?
1.Check the network signal strength.
2.Check whether you have activated the wireless online service.You can ask the local
network operator on how to activate it.
3.If the wireless online services is activated,check network settings according to the
instructions in the Internet Services.
Why cannot sounds be heard when I answer a call?
1.Check whether the audio adapter and audio adapter driver are installed on your PC.
2.If the audio adapter and audio adapter driver are installed,check whether the PC
speaker is disenabled.
3.Make sure that a microphone is used during a call.Otherwise,you cannot have a call
with using the sound box.
How to avoid echoes during a call?
The echoes are caused by the sound effect device of the other party.Do as follows to
avoid the echo and Improve the voice quality during a call:
 Request the other party to use an earphone that can lessen the echo instead of using
    the loudspeaker.
 If the other party uses the loudspeaker,you can turn down the volume to lessen the
    echo by the reducing the noise that microphone receives from the loudspeaker.
How to avoid the noise during a call?
1.Choose a quiet place to have a call.
2.Use the external earphone and microphone with high-performance because the built-in
microphone of the PC receives more backgroud noise.
3.Deselect Mic Boost.This option can enlarge the audio collection range in the same
environment and too much noise can be collected.
4.Adjust the location of the microphone to keep it far away from the noise source,such as
the heat dissipation fan of the PC.
Why cannot the sound of the other party be heard during a call?
1.The sound effect is not set properly.
 Check whether your microphone is muted.There may be a mute/unmute button on
     the microphone.
 The loudspeaker volume of the other party may be off or too low.Both of the parties
     should check the settings of their own devices,and ensure they can hear the other
     sounds on the computer.
 Your mixer may be set improperly.For details,refer to the audio adapter manual.
2.The network signal strength is too weak.


                                            8
A unidirectional call can be caused by weak signal strength or network failures.Dial the
number again in the place with strong signals.
Why do audio discontinuity and delay occur during a call?
The audio discontinuity and delay can be caused by the low network performance and
weak nerwork signals.Call in a place with strong signal.

11. Mobile Data@Work Service Center :
JAKARTA
 • Mangga 2 Mall Lt.4 Blok B No.24 -25, Telp. 021 – 30005598 / 62304028.
 • Orion Dusit Lt.2 No.16, Telp. 021 – 62302272-75.
 • Ratu Plaza Lt.3 No.2, Telp. 021 – 2700478.
 • Ratu Plaza Lt 1 No. 9 Telp. 021-7204504.
 • Harco Mangga 2 Lt.3 No.157A, Telp. 021 – 6125761/ 6125732 / 62537527.
 • Plaza Pinangsia Lt.1 No. 12, Telp. 021 – 6283621.
 • Point Square Lt.2 No.16, Telp. 021 – 75921250/ 75921272.
 • STC Lt.G No.110, Telp. 021 – 57936065.
 • STC Lt.LG No.111-112, Telp. 021 – 57936260.
 • Mall Ambasador Lt.3 No.67, Telp. 021 - 5762455 / 5762456.
 • ITC Cempaka Mas Mega Grosir Lantai 4 Blok I No.702-703, Telp. 021 – 42901685
 BEKASI, Mall MetroPolitan Bekasi Lt. 2 No. 16 / II Telp. 021-8854249 .
 BANDUNG, Bandung Electronic Center (BEC) Lt. 1 Blok B-08, Telp. 022-4208203 /
 2031715 / 2034883.
 YOGYAKARTA, Jl. Cik Di Tiro No.10, Telp. 0274 – 513338. Ramai Mall, Jl. Malioboro,
 Centra Computer Lt. 2 Blok D 24 Telp. 0274- 8225888.
 SEMARANG, Puri Anjasmoro Blok II/15 Lt.2, Telp. 024-7605050.
 SURABAYA, Wisma Dharmala (Gedung IntiLand) Lt.11 No. R1101-E,
 Telp. 031 – 5357655. HiTech (THR) Mall lt.Dsr No. E37, Telp. 031 – 5329757. HiTech
 (THR) Mall Lt.3 Blok D No.23, Telp. 031-5355586 / 5355587 / 70613770.
 DENPASAR, Jl. Teuku Umar, Denpasar Junction Mall Lt.2 blok CK Telp. 0361 - 257771.
 BANDA ACEH, Jl. Pari No. 7 Lampriet, Telp. 0651 – 7410099.
 MEDAN, Jl. KH Zainul Arifin No.53, Telp. 061 – 4575778. Medan Fair Lt.4 No. 26, Telp.
 061-5140337 / 4140337. Jl. Singa (Terusan Jl. Sumatera) No.8 Telp. 061-4531222/
 77791222. Jl.Wahidin No.244 Telp. 061 - 4154088 / 4556234.
 BUKIT TINGGI, Jl. A Karim No. 8D Telp. 0752-32797 / 7034714 .
 PADANG, Jl. AR Hakim No. 38 Telp. 0751-30383 / 7872108.
 PALEMBANG, Jl. Lingkaran I No. 305 Telp. 0711-313626.
 BATAM, Komplek Nagoya City Center Phase II Blok G No.1 Telp. 0778-429518.
 LAMPUNG, Jl. Diponogoro No.39 Telp. 0721-489870 / 486176.
 PEKANBARU, Jl. Moh. Yamin No.54, Telp. 0761 - 23413 / 24213 .
 PONTIANAK, Jl. Dr. Setiabudi No. 61A, Telp. 0561 – 761259.
 BALIKPAPAN, Jl. Jend. Ahmad Yani No.7, Telp. 0542 – 731965 / 6102098.
 BANJARMASIN, Jl. Sutoyo S No.20, Telp. 0511 - 3365741 / 3363669.
 MAKASSAR, Jl. Sungai Saddang Baru No.92B, Telp. 0411 – 458989 / 434490 / 459494
 MANADO, Mega Mall Lt.G No.11, Telp. 0431 – 879517.


                                           9

				
DOCUMENT INFO
Shared By:
Categories:
Tags:
Stats:
views:8
posted:9/19/2012
language:English
pages:12