Edwards FA Sales Support Sheet Conventional1 by ib3kJV4

VIEWS: 3 PAGES: 4

									                                                                             Date:___________

                          Edwards Sales Support Sheet
                         Conventional Fire Alarm Systems

Company name:_______________________                 Contact:____________________________

Phone number:________________________                e-mail:_____________________________

The following is a list of items that should be reviewed when you need to put together a bill of material
for a conventional fire alarm system. This information can then be used to help select the best
Edwards products to fit the job.

A specification that includes job requirements and sequence of operation is also very helpful. Without
a spec you may be able to put together a BOM, but the system may not function as needed. Riser
diagrams can also be useful, but should not always be relied upon for accurate device counts. Often
risers only show a sampling of devices, and not a complete count.

Panel Information:
How many input circuits (IDCs) are needed (not including elevator recall)?_________

Will panel be used for elevator recall/control (Y/N)?____ If yes, what will you need to monitor:
       Primary floor smokes (Y/N)?_____; Alternate floor smokes (Y/N)?_____
       Smoke detectors in shaft or machine room (Y/N)?_____; Heat detectors in shaft or machine
       room (Y/N)?_____; Power for shunt trip (Y/N)?_____; Sprinklers (Y/N)?_____
       (Each Yes answer will require a dedicated IDC)

How will input circuits be wired, class A or class B?________
(Class A means 2 wires out from circuit, returning to panel after last device. Class B means 2 wires
out with an end of line resistor after last device.)

Do you need a digital communicator (dialer) and/or LCD (Y/N)?_______

Do you need remote relays (for door holders, elevator recall, etc.) (Y/N)?_______

Do you need remote zone indication (remote annunciator) (Y/N)?_______ How many?_______

What is your battery backup requirements? Hours of standby:_______ Minutes of alarm:______
                                          (Typical is 24 hours standby, 5 minutes alarm)




                                                                                         Page 1 of 4
Alarm Initiating Devices:
Number of pull stations:     Single action_____    Double action_____ Weatherproof_____

                             Explosionproof_____

Number of surface mount boxes for (indoor) pull stations:_____

Number of heat detectors:    135 Fixed/ROR______         194 Fixed/ROR______

                             135 Fixed______             194 Fixed______

Number of weatherproof heat detectors:     135_____      194_____

Number of explosion proof heat detectors   135_____      194_____

Number of smoke detectors: Photoelectric______            Photo/Heat______

Number of smoke detectors with relays (not included above):_____

Number of smoke detectors with sounders (not included above)_____

Number of duct detectors:    2 wire______; 4 wire______(2 wires for power, 2 for initiation)

Number of test/reset stations:_____

Number of sampling tubes:    8”_____; 18”_____; 24”_____; 36”_____; 42”_____;

                             60”_____; 78”_____; 120”_____




                                                                                      Page 2 of 4
Signaling Devices & Accessories:
(It is important to know the candela requirements for the strobe devices. This will help determine
proper power supply size).

Color of wall mount devices (white or red):_____________ With “FIRE” wording (Y/N)______

Color of ceiling mount devices (white or red):_________ With “FIRE” wording (Y/N)______

Number of horns (indoor):_____               Number of horns (weatherproof):_____

Number of indoor wall mount horn strobes: 15cd_____; 30cd_____; 75cd_____; 110cd_____

Number of weatherproof horn strobes: 15/75cd_____; 110cd_____ (requires separate w.p. box)

Number of indoor wall mount strobes: 15cd_____ 30cd_____; 75cd_____; 110cd_____

Number of weatherproof strobes: 15/75cd_____; 110cd_____ (requires separate w.p. box)

Number of ceiling mount horns:_______

Number of ceiling mount horn strobes:        15cd_____; 30cd_____; 75cd_____; 95cd_____;

                                             115cd_____; 150cd_____; 177cd_____

Number of ceiling mount strobes:             15cd_____; 30cd_____; 75cd_____; 95cd_____;

                                             115cd_____; 150cd_____; 177cd_____

Number of trim plates for wall mount horn/strobes:_____ (for mtg. to 4”sq/dbl gang boxes)

Number of surface mount boxes for indoor wall mount horn/strobes:________

Will you require booster power supplies? If so, how many? 6 amp_____; 10 amp______

   E-FSC panels come with 3.5 amps of signal power. 10 zone panel can be expanded to 7
   amps.

Number of door holders: Flush______;         Surface_______




                                                                                        Page 3 of 4
Speakers and Speaker Strobes (for audio voice evacuation)
(It is important to select the correct candela settings for proper power supply size as well as correct
wattage for correct amplifier size)

Number of wall mount speakers tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

Number wall mount speaker strobes tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

    Number of each speaker strobe cd setting: 15cd_____; 30cd_____; 75cd_____; 110cd_____

Number of ceiling mount speakers tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

Number of ceiling speaker strobes tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

     Number of each ceiling speaker cd setting: 15cd_____; 30cd_____; 75cd_____;

     95cd_____; 115cd_____; 150cd_____; 177cd_____

Number of weatherproof speakers tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

Number of weatherproof speaker strobes tapped at: 1/4W_____; 1/2W_____; 1W_____; 2W_____

       Number of each wp speaker strobe cd setting: 15cd_____; 29cd_____; 70cd_____;

       87cd_____; 102cd_____; 123cd_____; 147cd_____; 161cd_____

Number of weatherproof boxes for speaker (strobes):_____

Number of double reentrant, projector type speakers tapped at: 1W_____; 2W_____;

4W_____; 8W_____; 15W_____
                                                 Primary ANS panel includes amplifier, 1 speaker circuit,
Audio Notification System Options                pre-recorded evacuation message, and microphone.

Number of speaker circuits:_____ (Can split ANS circuit up to 8 class B circuits, general alarm)

Number of remote microphones:_____ (Can have up to 5)

Is a backup amplifier needed (Y/N)?_____

Misc. (include any items or requirements not listed above):




                                                                                           Page 4 of 4

								
To top