white removable laser copier inkjet by b3JZgfan

VIEWS: 1 PAGES: 1

									A4 STOCK SPECIALITY SPEC SHEET


MULTIPURPOSE (LASER/COPIER/INKJET PRODUCTS)




White Paper with Removable adhesive
(REM)

A bright white, multifunction uncoated paper designed for ink jet, laser, and photocopiers.

Face material properties
Grammage                             70 gsm
Caliper (thickness)                  90 microns

Adhesive
A low tack water based rubber removable adhesive with applications on a varied range of surfaces,
the peel ability of the adhesive once applied depends on the material being labelled, the surface
shape, & the temperatures during application & storage. Because of these factors it is always
recommended that testing is appropriate prior to usage. As it is a soft adhesive it can become more
permanent in colder conditions, which should be taken into consideration. Stock removable adhesive
is not recommended for plasticised PVC, leather or suede. Adhesion to cardboard and polyethylene is
good and removability from polar surfaces e.g. glass is good

Minimum application temp.            -10C
Storage range once applied           -30C to +80C

Backing
A white woodfree kraft backing paper

Thickness                            55 microns
Grammage                             52 gsm

Environmental
Paper components are either ECF or TCF grade manufactured using pulp from sustainable, managed
resources. All dimensions are nominal target specifications, but may vary. All products within our
range are manufactured under ISO9001:2008

Issue: 160210

								
To top