Page 1 Dome Camera
Vicon® Industries V662V-312D/922D ANALOG OUTDOOR DOME CAMERA
28 23 00 VIDEO SURVEILLANCE
PART 2 - PRODUCTS
A. All equipment and materials used shall be standard components that are regularly
manufactured and used in the manufacturer’s system.
B. All systems and components shall have been thoroughly tested and proven in actual use.
C. All systems and components shall be provided with the availability of a toll free 24-hour
technical support phone number from the manufacturer. This no charge service shall be
available to dealers, installers and end users.
D. All systems and components shall be provided with an explicit manufacturer warranty.
2.02 ANALOG VANDAL-PROOF WDR OUTDOOR DOME CAMERA
A. The outdoor dome camera shall incorporate a combination camera and lens with either a
2.8-12 mm or 9-22 mm varifocal lens. The camera shall have an extended wide dynamic
range, which shall improve detail in bright and low light areas of the image.
B. The camera shall have a resolution of 650 TVL. Built-in 3D digital noise reduction shall
improve image quality in low-light environments. Extended High Light Compensation
(EHLC) shall reverse the bright spots in a scene to improve exposure of other regions in
C. Privacy masking shall provide the ability to mask out up to 15 selected regions of the
D. The camera shall provide motion detection, backlight compensation, sidelight
compensation and automatic white balance. Digital image stabilization shall provide a
stable image in a variety of conditions for excellent recording and playback.
E. When installed in network environments utilizing an encoder, a Frame Rate Control
function shall substantially reduce network storage in low or no motion environments by
sending the same frame (duplicate) when there is no motion. By providing the encoder
with a pristine, static image, the network storage system shall be minimally impacted
resulting in less storage consumed. The feature shall be turned on or off as required.
F. The camera shall be constructed of die-cast aluminum with a smoked, high-impact,
polycarbonate plastic dome and black security mask. The camera shall be protected with
tamper-resistant screws and be rated for IP66. The camera shall be surface or ceiling
G. Pole, corner, in-ceiling and pendant-style mounting shall be possible with the addition of
H. The camera shall be designed for easy installation and setup. The extensive onscreen
display menus shall allow set up of white balance, AGC, backlight compensation,
exposure, privacy masks and many other functions.
I. A PAL model shall be available.
Page 2 Dome Camera
2.03 CAMERA AND OPTICS SPECIFICATIONS
A. Image Device: 1/3-inch Sony® Super HAD™ II PS 960H CCD.
B. Picture Elements: NTSC: 1020 (H) x 508 (V), 518,000 pixels.
PAL: 1020 (H) x 596 (V), 608,000 pixels.
C. Scanning System: 2:1 interlace.
D. Scanning Frequency: NTSC: 15.734 KHz (H) x 60 Hz (V)
PAL: 15.625 KHz (H) x 50 Hz (V)
E. Synchronization: Internal/Line Lock (Phase control).
F. Shutter Speed: NTSC: 1/60-1/100,000 sec.
PAL: 1/50-1/100,000 sec.
G. Horizontal Resolution: 650 TV lines.
H. Sensitivity: Color: 0.04 fc (0.4 lux).
B&W: 0.004 fc (0.04 lux).
Slow Shutter: 0.0001 fc (0.001 lux).
I. Video Output: 1.0 V p-p @ 75 ohms, composite.
J. S/N Ratio: 50 dB (AGC off).
K. Camera Control: RS-485, compatible with Fastrax, Pelco D, Pelco P.
L. Auto Iris Control: DC/ELC.
M. Exposure: Auto/Manual Shutter/Flickerless/Low Light
O. Automatic Gain
Control (AGC): Selectable: Off, Low, Middle, High.
P. Dynamic Range: X 512.
Q. Sense Up: X 32.
R. Digital Noise
Reduction: 2D R, 3D NR, Gain Adjust, DNR Demo.
S. White Balance: Auto/CRS/Push & Hold/Indoor/Outdoor/FL/User.
T. Privacy Mask: 15 programmable zones (Tilt, Color, Transparency,
U. Digital Zoom: 0-255 zoom. D-PTZ support enables pan and tilt
functionality within zoomed scene.
V. Focal Length: 2.8-12 mm or 9-22 mm.
W. Aperture: f/1.2.
X. Field of View: 2.8 mm: 94.2° H; 12 mm: 26.2° H.
9 mm: 30.7° H; 22 mm: 12.5° H.
A. Control Display: On-screen, menu-driven system allowing full
configuration of the camera.
B. Day/Night: Auto/Day/Night/Ext.
C. Video Analytics: Zone/Motion/Face Trace/Object Detection/
Line Crossing/Counting/Tamper Detection.
Provide contact closure for alarm output.
D. Titling: Alphanumeric character set, up to 8 characters.
E. Frame Rate Control: Auto/Off.
F. Effects: V-Flip/Mirror/Rotation/Neg or os/Freeze/Sharpness.
Page 3 Dome Camera
2.05 ELECTRICAL SPECIFICATIONS
A. Input Voltage: 12 VDC ± 10% or 24 VAC ± 10%.
B. Current: 0.38 A @ 12 VDC max.
0.19 A @ 24 VAC max.
C. Power Consumption: 4.5 W maximum.
D. Connectors: Power: 2-pin connector.
Video: BNC on pendant cable.
RS-485: 2-pin connector.
2.06 ENVIRONMENTAL SPECIFICATIONS
Temperature: 14 to 131° F (-10 to 55° C).
-22 to 131º F (-30 to 55º C) with optional heater.
B. Humidity: Up to 90% relative, non-condensing.
2.07 MECHANICAL SPECIFICATIONS
A. Construction: Die-cast aluminum housing with smoked
polycarbonate plastic dome and black mask and
tamper-resistant screws. IP66 rated.
B. Dimensions: Height: 4.54” (115.4 mm ).
Housing Diameter: 5.88” (146.4 mm).
Dome Diameter: 3.9” (100 mm).
C. Weight: 1.54 lb (0.7 kg)
D. Camera Mounting: Outdoor: surface or ceiling. Pole, corner, in-ceiling
and pendant-style mounting with optional
B. UL Listing.
C. FCC, Class A.
A. 3 years, parts and labor.
2.10 APPROVED MANUFACTURERS
A. The fixed dome, IR camera shall be Vicon Model V662V-312D or V662V-922D.
END OF SECTION
Vicon is a registered trademark of Vicon Industries Inc. in the United States and other countries.
Sony and HAD are registered trademarks or trademarks of Sony Corporation.