proctor mold form by Zy2C9BH4

VIEWS: 29 PAGES: 1

									                           PROCTOR MOLD CALIBRATION FORM
   Specifications:

               MOLD
             DIMENSION                REQUIRED (Metric)                       REQUIRED (English)
             Volume                   0.000943m³  0.000008m³                 1/30 (0.0333)ft³  0.0003ft³
         Diameter ( New )                101.6mm  0.406mm                         4.000in  0.016in
        Diameter ( Used ) *              101.6mm  0.609mm                         4.000in  0.024in
          Height ( New )                116.43mm  0.127mm                         4.584in  0.005in
         Height ( Used ) *              116.43mm  0.190mm                         4.584in  0.008in

              Diameter     Diameter      Diameter      Diameter    Diameter                                   Date
MOLD №           #1           #2            #3            #4       Average
                                                                                   Height         Volume
                                                                                                             Checked




   Volume Formula:  (3.1416) r² h = in³ / 1728in³ = 1ft³

   * Note: A mold that’s fails to meet manufacturing tolerances after continued service may remain in use provided
   these tolerances are not exceeded by more than and the volume 50 % of the mold dose not exceed 0.000943m³ ±
   0.000008m³ (1/30 [0.0333] ft³ ± 0.0003ft³).

   Lab Manual – 2004.3
   4 – 17 – 95


                                                                           Calibration Form\proctor mold form.doc

								
To top